Cutting Center
Machinelist: Cutting Center
Cutting Center
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-16041 · Cutting Center
AMADA - ATF 1332 - - 1993 -
Technical details
drive mechanical materials: steel sheet, magnetical materials section length 55 - 1.230 mm stroke (in continuous operation) 220 / min. shear angle 1° 15' loading accuracy ± 0,2 mm energy supply 380 V, 50 Hz, 60 A compressed air demand 6 bar, 1000 l/min max. load capacity 3.000 kg max. unload capacity 2.000 kg max. stacking height incl. pallett 500 mm sheet size of the loading unit max. 2.500 x 1.300 mm material handling: magnetic conveyor conveyor speed 50 m/min width tolerance -0,2/+0,2 diagonal 0,5 mm / 1 mm in right angle sheet size input: width min./max. 900 - 2.500 mm length 300 - 1.300 mm shear range: leading edge (trimming cut): 6 mm or more (for sheets thinner than 2,3 mm) 10 mm or more (for sheets with a thickness from 2,3 to 3,2 mm). until 60 mm can be trimmed for a specific number. rear edge (residual sheet): 7 - 60 mm (for sheets thinner than 2,3 mm) 18 until 60 mm (for sheets with a thickness from 2,3 to 3,2 mm). residual sheet must be 20 mm wide if the work piece width is 35 until 130 mm.
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-1604 · Cutting Center
AMADA - ATF 2023 - - 1994 -
Technical details
drive mechanical materials: steel sheet, magnetical materials section length 85 - 1.250 mm stroke (in continuous operation) 220 / min. shear angle 0° 50' loading accuracy ± 0,2 mm energy supply 380 V, 50 Hz, 60 A compressed air demand 6 bar, 1000 l/min max. load capacity 3.000 kg max. unload capacity 2.000 kg max. stacking height incl. pallett 500 mm sheet size of the loading unit max. 2.500 x 2.000 mm material handling: magnetic conveyor conveyor speed 50 m/min equipment: - automatical loading system - loading table with air cushion positioning support - spreading magnets and single sheet control - vacuum absorber traverse switchable in groups - edge cutting stop - scrap switch / edge cutting container - backgauge sensors - stacking unit with max. height control - lateral slider - residual strip storage - NC control
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-1603 · Cutting Center
FISCHER - FSZW 4/3000/800 - - 1991/2010 -
Technical details
starting size: l max. 3.000 mm w max. 1.500 mm finished size: 40 x 40 - 800 x 600 mm 100 x 300 - 1.250 x cutting length otherwise according to data sheet
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-1605 · Cutting Center
FISCHER - FSZW 6/1000/1500-1570E - - 2010 -
Technical details
output format length max. 3.050 mm, width max. 1.500 mm min. 800 x 800 mm otherwise according technical specification 16.05
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-1606 · Cutting Center
FISCHER - FSZW 6/1000/1500-1570E - - 2011 -
Technical details
output format length max. 3.050 mm, width max. 1.550 mm min. 800 x 800 mm otherwise according to technical specification 16.06
- STEINHAND GmbH
- Am Stahlwerk 15
- 45527 Hattingen
- Deutschland
-
+49 (0) 2324 / 977 26 - 01
+49 (0) 2324 / 977 26 - 99 -
info@steinhand.de
www.steinhand.de
#2026-1255 · Cutting Center
GEBR. HEZEL - AMH 3 - - 1980 -
Technical details
Cutting machine GEBR. HEZEL - AMH 3, AMH 4 The machine is in good condition and can be inspected under power. ! Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AMH-3 | AMH3
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-16060 · Cutting Center
MENGELE - S10-3000 - - 1988 -
Technical details
PLATE SHEAR working pressure max. 280 bar incl. stacking unit
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-16061 · Cutting Center
MENGELE - S16-3000 - - 1999 -
Technical details
PLATE SHEAR working pressure max. 260 bar incl. stacking unit
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-16062 · Cutting Center
MENGELE - S6-5000 - - 1999 -
Technical details
PLATE SHEAR incl. stacking unit
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de
#2008-1602 · Cutting Center
MENGELE/FEZER/LAWECO - - - 1982/1983 -
Technical details
CUTTING CENTER (CNC) otherwise according to technical specification 16.02
Trader Profile: Schmitt Reinhold GmbH
Maschinen Und Anlagen Für Bänder,
Bleche, Rohre Und Profile
Contact Trader
Maschinen Und Anlagen Für Bänder,
Bleche, Rohre Und Profile
Obernahmerstr. 74
58119 - Hagen-Hohenlimburg
Deutschland
+49 (0)2334 4847">+49 (0)2334 4847
+49 (0)2334 4840
info@reinhold-schmitt.de
www.reinhold-schmitt.de
Profile of Trader
We are a trading company which was established in 1969 and we have a storage space of about 3.200 m² and our business is to sell used and new machinery for metal processing.
e deal with the purchasing and selling of used and new machinery, as well as manufacturing facilities for the production and handling of COILS, SHEET METAL, TUBES and PROFILES from steel, stainless steel, copper, brass and aluminium, for example HOT ROLLING MILLS, COLD ROLLING MILLS, SLITTING LINES, CUT TO LENGTH LINES, DECOILER, RECOILER, TUBE WELDING LINES, PROFILING LINES, LEVELER, STRAIGHTENER, ANNEALING- and HARDNESS PLANTS as well as components of the mentioned machinery.
If required we handle the dismantling, loading, logistic, import, export process and reassembly of the facilities as well as modernizing or changing the control mode. We assure at any time a professional and qualified collaboration to meet your expectations.
We have nearly 50 years experience in the business of trading used and new machineries as well as manufacturing facilities for the production and handling of COILS, SHEET METAL, TUBES and PROFILES.
Contact us
REINHOLD SCHMITT GMBH
Contact persons:
Roland Becker
Holger Suberg
Giovanna Isopp
Obernahmerstrasse 74, D – 58119 Hagen (Germany)
02334 4847
02334 4840
info@reinhold-schmitt.de
TOP Manufacturer:
Obernahmerstr. 74
Contact Trader
Obernahmerstr. 74
58119 - Hagen-Hohenlimburg
Deutschland
+49 (0)2334 4847
+49 (0)2334 4840
info@reinhold-schmitt.de
www.reinhold-schmitt.de
Contact person: