European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          STEINHAND GmbH - Stockist for used machines

          Machinelist:


          Automatic Curve Lathe

          used  Automatic Curve Lathe WACHTLER A25 GLE


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1239 · Automatic Curve Lathe

          WACHTLER - A25 GLE - - 2018 -

          Technical details
          - - - - - Main spindle - - - - - - - - - - -︱hollow 25 mm︱--- Subspindle --- - - - - - -︱hollow 15 mm︱
          Single spindle automatic lathe WACHTLER - A25 GLE All accessories are included. The machine is in a well-maintained condition. Please refer to the offer for further technical details. Machine video available on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: A 25 | A-25 | A25GLE
            - - - - - Main spindle - - - - - - - - - - -
            hollow 25 mm
            --- Subspindle --- - - - - - -
            hollow 15 mm
            Description :
            Single spindle automatic lathe WACHTLER - A25 GLE

            All accessories are included.

            The machine is in a well-maintained condition.

            Please refer to the offer for further technical details.

            Machine video available on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: A 25 | A-25 | A25GLE
          Datasheet
          Request / Contact

          CNC Turning & Grinding Center - vertical

          used  CNC Turning & Grinding Center - vertical EMAG VSC 400 DDS


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1308 · CNC Turning & Grinding Center - vertical

          EMAG - VSC 400 DDS - - 2010 - SIEMENS 840D

          Technical details
          max. swing over bed 260 mm︱max. turning diameter 315 mm︱control SIEMENS 840D ︱spindle bore 50 mm︱spindle diameter in front bearing 100 mm︱Torque 460 Nm︱chucking diameter 200 / 250 mm︱with 1-bed slide ︱number of cross-slides 1 ︱tool taper HSK C63 ︱numbers of positions in the tool changer 12 ︱max. tool diameter 40 mm︱Dimensions (L x W x H) 5.500 x 11.600 x 3.300 mm︱weight of the machine 12.500 kg︱
          6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS Additional equipment: - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka) The machine is in very good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS
            max. swing over bed 260 mm
            max. turning diameter 315 mm
            control SIEMENS 840D
            spindle bore 50 mm
            spindle diameter in front bearin. 100 mm
            Torque 460 Nm
            chucking diameter 200 / 250 mm
            number of cross-slides 1
            tool taper HSK C63
            numbers of positions in the tool. 12
            max. tool diameter 40 mm
            Dimensions (L x W x H) 5.500 x 11.600 x 3.300 mm
            weight of the machine 12.500 kg
            Description :
            6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS


            Additional equipment:

            - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka)

            The machine is in very good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center OKUMA L300-M


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1406 · CNC Turning- and Milling Center

          OKUMA - L300-M - - 2015 - OSP - P300

          Technical details
          swing over bed 520 mm︱swing diameter over slide rest 400 mm︱control OSP - P300 ︱max. turning diameter 300 mm︱Max. Turning length 450 mm︱turning speed range 25 - 3.000 U/min︱driven tools turning speeds 4.500 U/min︱travel -x axis 235 mm︱travel -z axis 520 mm︱number controlled axis 2 ︱no. of workpieces in the magazine 12 Stück︱Dimensions (L x W x H) 2.280 x 1.800 x 1.740 mm︱weight of the machine 4.600 kg︱
          CNC Turning- and Milling Center | OKUMA - L300-M The machine is in good condition. Please refer to further technical details in the attachement of the offer. Machine video available on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: L300 M | L 300M | L-300 M | L-300M
            swing over bed 520 mm
            swing diameter over slide rest 400 mm
            control OSP - P300
            max. turning diameter 300 mm
            Max. Turning length 450 mm
            turning speed range 25 - 3.000 U/min
            driven tools turning speeds 4.500 U/min
            travel -x axis 235 mm
            travel -z axis 520 mm
            number controlled axis 2
            no. of workpieces in the magazin. 12 Stück
            Dimensions (L x W x H) 2.280 x 1.800 x 1.740 mm
            weight of the machine 4.600 kg
            Description :
            CNC Turning- and Milling Center | OKUMA - L300-M


            The machine is in good condition.

            Please refer to further technical details in the attachement of the offer.

            Machine video available on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: L300 M | L 300M | L-300 M | L-300M
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center OKUMA L300-M


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1407 · CNC Turning- and Milling Center

          OKUMA - L300-M - - 2015 - OSP - P300

          Technical details
          swing over bed 520 mm︱swing diameter over slide rest 400 mm︱control OSP - P300 ︱max. turning diameter 300 mm︱Max. Turning length 450 mm︱turning speed range 25 - 3.000 U/min︱driven tools turning speeds 4.500 U/min︱travel -x axis 235 mm︱travel -z axis 520 mm︱number controlled axis 2 ︱no. of workpieces in the magazine 12 Stück︱Dimensions (L x W x H) 2.280 x 1.800 x 1.740 mm︱weight of the machine 4.600 kg︱
          CNC Turning- and Milling Center | OKUMA - L300-M The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: L300 M | L 300M | L-300 M | L-300M
            swing over bed 520 mm
            swing diameter over slide rest 400 mm
            control OSP - P300
            max. turning diameter 300 mm
            Max. Turning length 450 mm
            turning speed range 25 - 3.000 U/min
            driven tools turning speeds 4.500 U/min
            travel -x axis 235 mm
            travel -z axis 520 mm
            number controlled axis 2
            no. of workpieces in the magazin. 12 Stück
            Dimensions (L x W x H) 2.280 x 1.800 x 1.740 mm
            weight of the machine 4.600 kg
            Description :
            CNC Turning- and Milling Center | OKUMA - L300-M


            The machine is in good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: L300 M | L 300M | L-300 M | L-300M
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX G400 S-1/300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1044 · CNC Turning- and Milling Center

          INDEX - G400 S-1/300 - - 2011 - INDEX - C200-4D

          Technical details
          work travel X:320 & Z:1250 mm︱rapid traverse X:20 & Z:40 m/min︱control INDEX - C200-4D ︱--- MOTOR MILLING SPINDLE --- ------------------------- ︱tool taper HSK A63 ︱turning speeds 12000 U/min︱Power 27,5 KW︱front bearing 80 mm︱turning speeds 3000 U/min︱MAIN SPINDLE D102 direct drive ------------------------- ︱spindle diameter in front bearing 1200 mm︱spindle passage 102 mm︱forward bearing diameter 170 mm︱
          CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300
            work travel X:320 & Z:1250 mm
            rapid traverse X:20 & Z:40 m/min
            control INDEX - C200-4D
            --- MOTOR MILLING SPINDLE --- -------------------------
            tool taper HSK A63
            turning speeds 12000 U/min
            Power 27,5 KW
            front bearing 80 mm
            turning speeds 3000 U/min
            MAIN SPINDLE D102 direct drive -------------------------
            spindle diameter in front bearin. 1200 mm
            spindle passage 102 mm
            forward bearing diameter 170 mm
            Description :
            CNC Turning- and Milling Center | INDEX - G400 S-1/300

            The machine is in a very good condition
            with only 2500 H main working hours.

            + MARPOSS probe

            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G400 | G 400 | G400 S1 300 | G400S1 300
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK QUICKTURN NEXUS 250-IIM


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1400 · CNC Turning- and Milling Center

          MAZAK - QUICKTURN NEXUS 250-IIM - - 2008 - Mazak Mazatrol Matrix Nex

          Technical details
          Max. Turning length 1.021 mm︱max. swing diameter 230 mm︱turning diameter over bed 675 mm︱turning diameter over slide 267 mm︱control Mazak Mazatrol Matrix Nex ︱numbers of positions in the tool changer 12 ︱number of spindle speeds 4.000 U/min︱
          CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
            Max. Turning length 1.021 mm
            max. swing diameter 230 mm
            turning diameter over bed 675 mm
            turning diameter over slide 267 mm
            control Mazak Mazatrol Matrix Nex
            numbers of positions in the tool. 12
            number of spindle speeds 4.000 U/min
            Description :
            CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM


            The machine is in good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK QUICKTURN NEXUS 250-IIM


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1401 · CNC Turning- and Milling Center

          MAZAK - QUICKTURN NEXUS 250-IIM - - 2008 - Mazatrol Matrix Nexus

          Technical details
          Max. Turning length 1.021 mm︱max. swing diameter 230 mm︱turning diameter over bed 675 mm︱turning diameter on the slide 267 mm︱control Mazatrol Matrix Nexus ︱numbers of positions in the tool changer 12 ︱number of spindle speeds 4.000 U/min︱
          CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
            Max. Turning length 1.021 mm
            max. swing diameter 230 mm
            turning diameter over bed 675 mm
            turning diameter on the slide 267 mm
            control Mazatrol Matrix Nexus
            numbers of positions in the tool. 12
            number of spindle speeds 4.000 U/min
            Description :
            CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM


            The machine is in good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK QUICKTURN NEXUS 250-IIM


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1402 · CNC Turning- and Milling Center

          MAZAK - QUICKTURN NEXUS 250-IIM - - 2007 - Mazatrol Matrix Nexus

          Technical details
          Max. Turning length 1.021 mm︱max. swing diameter 230 mm︱turning diameter over bed 675 mm︱turning diameter over slide 276 mm︱control Mazatrol Matrix Nexus ︱numbers of positions in the tool changer 12 ︱number of spindle speeds 4.000 U/min︱
          CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
            Max. Turning length 1.021 mm
            max. swing diameter 230 mm
            turning diameter over bed 675 mm
            turning diameter over slide 276 mm
            control Mazatrol Matrix Nexus
            numbers of positions in the tool. 12
            number of spindle speeds 4.000 U/min
            Description :
            CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM


            The machine is in good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK QUICKTURN NEXUS 250-IIM


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1399 · CNC Turning- and Milling Center

          MAZAK - QUICKTURN NEXUS 250-IIM - - 2007 - Mazatrol Matrix Nexus

          Technical details
          Max. Turning length 1.021 mm︱max. swing diameter 230 mm︱turning diameter over bed 675 mm︱turning diameter over slide 267 mm︱control Mazatrol Matrix Nexus ︱numbers of positions in the tool changer 12 ︱number of spindle speeds 4.000
          CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
            Max. Turning length 1.021 mm
            max. swing diameter 230 mm
            turning diameter over bed 675 mm
            turning diameter over slide 267 mm
            control Mazatrol Matrix Nexus
            numbers of positions in the tool. 12
            number of spindle speeds 4.000
            Description :
            CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM


            The machine is in good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK QUICKTURN NEXUS 250-IIM


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1404 · CNC Turning- and Milling Center

          MAZAK - QUICKTURN NEXUS 250-IIM - - 2007 - Mazak Mazatrol Matrix Nex

          Technical details
          Max. Turning length 1.021 mm︱max. swing diameter 230 mm︱turning diameter over bed 675 mm︱turning diameter over slide 267 mm︱control Mazak Mazatrol Matrix Nex ︱numbers of positions in the tool changer 12 ︱number of spindle speeds 4.000 U/min︱
          CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
            Max. Turning length 1.021 mm
            max. swing diameter 230 mm
            turning diameter over bed 675 mm
            turning diameter over slide 267 mm
            control Mazak Mazatrol Matrix Nex
            numbers of positions in the tool. 12
            number of spindle speeds 4.000 U/min
            Description :
            CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM


            The machine is in good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center WFL M65


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1416 · CNC Turning- and Milling Center

          WFL - M65 - - 2000 - Siemens 840 C

          Technical details
          turning diameter 650 mm︱turning length 2.000 mm︱control Siemens 840 C ︱spindle bore 115 mm︱number of spindle speeds 8 - 3.300 U/min︱tailstock quill taper MT 5 ︱tailstock quill diameter 140 mm︱tailstock quill stroke 160 mm︱tailstock travel 2.555 mm︱numbers of positions in the tool changer 2 x 36 ︱tool taper Sandvik Capto C8 ︱Dimensions (L x W x H) 11.360 x 4.110 x 3.440 mm︱
          CNC Turning- and Milling Center | WFL - M65 equipped with tool changer. The machine is in a very well-maintained condition and can be inspected at any time under power. Please note that the machine works at an aerospace company and is maintained to the highest standard. The spindle bearings are renewed every two years (last renewal early 2022). The machine is under following control mechanisms: - Daily control positions - Weekly cleaning - Maintenance/inspection every 8 weeks - Annual major maintenance with inspection of the basic geometry Please refer to further technical details in the attachment of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M 65 | M-65 | M65 x 2000 | M 65 x 2000
            turning diameter 650 mm
            turning length 2.000 mm
            control Siemens 840 C
            spindle bore 115 mm
            number of spindle speeds 8 - 3.300 U/min
            tailstock quill taper MT 5
            tailstock quill diameter 140 mm
            tailstock quill stroke 160 mm
            tailstock travel 2.555 mm
            numbers of positions in the tool. 2 x 36
            tool taper Sandvik Capto C8
            Dimensions (L x W x H) 11.360 x 4.110 x 3.440 mm
            Description :
            CNC Turning- and Milling Center | WFL - M65
            equipped with tool changer.


            The machine is in a very well-maintained condition and
            can be inspected at any time under power.
            Please note that the machine works at an aerospace company and is maintained to
            the highest standard. The spindle bearings are renewed every two years (last
            renewal early 2022).

            The machine is under following control mechanisms:
            - Daily control positions
            - Weekly cleaning
            - Maintenance/inspection every 8 weeks
            - Annual major maintenance with inspection of the basic geometry

            Please refer to further technical details in the attachment of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: M 65 | M-65 | M65 x 2000 | M 65 x 2000

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX G300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1364 · CNC Turning- and Milling Center

          INDEX - G300 - - 2000 - Siemens C 200-4

          Technical details
          travel -x axis 140 mm︱travel -z axis 710 mm︱control Siemens C 200-4 ︱main spindle speeds 5.000 U/min︱bore diameter 65 mm︱numbers of positions in the tool changer 24 (2x12)
          CNC Turning- and Milling Center | INDEX - G300 + 2 turret + tailstock + bar feeder: Index MBL 65 Scope of delivery: - tool holder fixed The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G 300 | G-300
            travel -x axis 140 mm
            travel -z axis 710 mm
            control Siemens C 200-4
            main spindle speeds 5.000 U/min
            bore diameter 65 mm
            numbers of positions in the tool. 24 (2x12)
            Description :
            CNC Turning- and Milling Center | INDEX - G300

            + 2 turret
            + tailstock
            + bar feeder: Index MBL 65

            Scope of delivery:
            - tool holder fixed


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G 300 | G-300

          Datasheet
          Request / Contact

          Facing Lathe

          used  Facing Lathe ZERBST DP05/W08


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1376 · Facing Lathe

          ZERBST - DP05/W08 - - 1985 - 2010 - Siemens Sinumerik 840D

          Technical details
          faceplate diameter 4.000 mm︱travel -x axis 4.500 mm︱travel -z axis 600 mm︱control Siemens Sinumerik 840D ︱feed range 0 - 8.000 mm/min︱turning speeds 1) 0,7 - 5,6 U/min︱turning speeds 2) 2,8 - 22,4 U/min︱turning speeds 2,1 - 56 U/min︱tool taper Sauter
          Head lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08
            faceplate diameter 4.000 mm
            travel -x axis 4.500 mm
            travel -z axis 600 mm
            control Siemens Sinumerik 840D
            feed range 0 - 8.000 mm/min
            turning speeds 1) 0,7 - 5,6 U/min
            turning speeds 2) 2,8 - 22,4 U/min
            turning speeds 2,1 - 56 U/min
            tool taper Sauter
            Description :
            Head lathe | ZERBST - DP05/W08

            Scope of delivery:

            - Chip conveyor
            - Hydraulic unit

            The ZERBST - DP05/W08 has been retrofitted in 2010.

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DP05W08 | DP05 W08 | DP05-W08
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled VDF-BOEHRINGER 315 Cm


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1414 · Lathe - cycle-controlled

          VDF-BOEHRINGER - 315 Cm - - 2001 - Siemens SINUMERIK 840 D

          Technical details
          greates pass round over bed 550 mm︱turning diameter over bed slide 480 mm︱turning length 1.000 mm︱cross movement 405 mm︱control Siemens SINUMERIK 840 D ︱turning speed range 7 - 2.800 U/min︱spindle bore 103 mm︱numbers of positions in the tool changer 12
          CNC cycle-controlled lathe | VDF-BOEHRINGER - 315 Cm The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VDF-BÖHRINGER - 315 Cm | VDF - 315 Cm | 315Cm
            greates pass round over bed 550 mm
            turning diameter over bed slide 480 mm
            turning length 1.000 mm
            cross movement 405 mm
            control Siemens SINUMERIK 840 D
            turning speed range 7 - 2.800 U/min
            spindle bore 103 mm
            numbers of positions in the tool. 12
            Description :
            CNC cycle-controlled lathe | VDF-BOEHRINGER - 315 Cm


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VDF-BÖHRINGER - 315 Cm | VDF - 315 Cm | 315Cm
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled GILDEMEISTER NEF-320 K


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1350 · Lathe - cycle-controlled

          GILDEMEISTER - NEF-320 K - - 2001 - Siemens Sinumerik

          Technical details
          greates pass round over bed 320 mm︱swing diameter over slide rest 150 mm︱chucking diameter 200 mm︱cross movement 185 mm︱control Siemens Sinumerik ︱centre distance 750 mm︱spindle taper MK6 ︱turning speed range 1. 14 - 900 U/min︱turning speed range 2. 56 - 3.550 U/min︱Dimensions (L x W x H) 2.600 x 1.440 x 1.440 mm︱Weight 2.000 kg︱
          CNC cycle-controlled lathe | GILDEMEISTER - NEF-320 K The machine is in a good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: NEF320 K | NEF320K | NEF 320 K | NEF 320K
            greates pass round over bed 320 mm
            swing diameter over slide rest 150 mm
            chucking diameter 200 mm
            cross movement 185 mm
            control Siemens Sinumerik
            centre distance 750 mm
            spindle taper MK6
            turning speed range 1. 14 - 900 U/min
            turning speed range 2. 56 - 3.550 U/min
            Dimensions (L x W x H) 2.600 x 1.440 x 1.440 mm
            Weight 2.000 kg
            Description :
            CNC cycle-controlled lathe | GILDEMEISTER - NEF-320 K

            The machine is in a good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: NEF320 K | NEF320K | NEF 320 K | NEF 320K
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe STAR SA-12


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1348 · Turning Automatic Lathe - swiss lathe

          STAR - SA-12 - - 1999 - FANUC 18i-TA

          Technical details
          control FANUC 18i-TA ︱- - - - - - - - -︱- - - - - - - - -︱
          CNC AUTOMATIC LATHE | STAR - SA-12 with bar feeder The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SA 12 | SA12
            control FANUC 18i-TA
            - - - - - - - - -
            - - - - - - - - -
            Description :
            CNC AUTOMATIC LATHE | STAR - SA-12 with bar feeder

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: SA 12 | SA12
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine EMAG VL 7 mLT


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1366 · Vertical Turning Machine

          EMAG - VL 7 mLT - - 2011 - FANUC 31i/32i

          Technical details
          chucking diameter 315 / 400 mm︱swing diameter 420 mm︱travel -x axis 850 mm︱travel -z axis 315 mm︱control FANUC 31i/32i ︱Turning speeds mainspindle 3.400 U/min︱numbers of positions in the tool changer 12 ︱driven tools turning speeds 6.000 U/min︱Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm︱weight of the machine 10.000 kg︱
          Vertical single spindle CNC lathe | EMAG - VL 7 mLT with driven tools, probe and ITC. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL7 | VL7mLT | VL-7
            chucking diameter 315 / 400 mm
            swing diameter 420 mm
            travel -x axis 850 mm
            travel -z axis 315 mm
            control FANUC 31i/32i
            Turning speeds mainspindle 3.400 U/min
            numbers of positions in the tool. 12
            driven tools turning speeds 6.000 U/min
            Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm
            weight of the machine 10.000 kg
            Description :
            Vertical single spindle CNC lathe | EMAG - VL 7 mLT
            with driven tools, probe and ITC.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL7 | VL7mLT | VL-7
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VL 7 mLT


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1367 · Vertical Turning Machine

          EMAG - VL 7 mLT - - 2011 - FANUC 31i/32i

          Technical details
          chucking diameter 315 / 400 mm︱swing diameter 420 mm︱travel -x axis 850 mm︱travel -z axis 315 mm︱control FANUC 31i/32i ︱Turning speeds mainspindle 3.400 U/min︱numbers of positions in the tool changer 12 ︱driven tools turning speeds 6.000 U/min︱Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm︱weight of the machine 10.000 kg︱
          Vertical single spindle CNC lathe | EMAG - VL 7 mLT with driven tools, probe and ITC. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL7 | VL7mLT | VL-7
            chucking diameter 315 / 400 mm
            swing diameter 420 mm
            travel -x axis 850 mm
            travel -z axis 315 mm
            control FANUC 31i/32i
            Turning speeds mainspindle 3.400 U/min
            numbers of positions in the tool. 12
            driven tools turning speeds 6.000 U/min
            Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm
            weight of the machine 10.000 kg
            Description :
            Vertical single spindle CNC lathe | EMAG - VL 7 mLT
            with driven tools, probe and ITC.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL7 | VL7mLT | VL-7
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VL 7 mLT


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1368 · Vertical Turning Machine

          EMAG - VL 7 mLT - - 2011 - FANUC 31i/32i

          Technical details
          chucking diameter 315 / 400 mm︱swing diameter 420 mm︱travel -x axis 850 mm︱travel -z axis 315 mm︱control FANUC 31i/32i ︱Turning speeds mainspindle 3.400 U/min︱numbers of positions in the tool changer 12 ︱driven tools turning speeds 6.000 U/min︱Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm︱weight of the machine 10.000 kg︱
          Vertical single spindle CNC lathe | EMAG - VL 7 mLT with driven tools, probe and ITC. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL7 | VL7mLT | VL-7
            chucking diameter 315 / 400 mm
            swing diameter 420 mm
            travel -x axis 850 mm
            travel -z axis 315 mm
            control FANUC 31i/32i
            Turning speeds mainspindle 3.400 U/min
            numbers of positions in the tool. 12
            driven tools turning speeds 6.000 U/min
            Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm
            weight of the machine 10.000 kg
            Description :
            Vertical single spindle CNC lathe | EMAG - VL 7 mLT
            with driven tools, probe and ITC.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL7 | VL7mLT | VL-7
          Datasheet
          Request / Contact
          used  Vertical Turning Machine HESSAP VDM 800-12


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1315 · Vertical Turning Machine

          HESSAP - VDM 800-12 - - 2009 - Siemens 840d sl

          Technical details
          max. turning diameter 820 mm︱max. turning height 750 mm︱control Siemens 840d sl ︱tool taper HSK 100/63 ︱tools in tool magazin 120 ︱Workpiece storage 12-fach
          Vertical Lathe | HESSAP - VDM 800-12 + driven tools / C-axis + gear hobbing equipment Additional equipment: - CELLRO Toolchanger with a FANUC Robot for tool changing - LoadMaster Compact 1150 for storing the workpieces The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VDM800-12 | VDM 800 12 | VDM800 12
            max. turning diameter 820 mm
            max. turning height 750 mm
            control Siemens 840d sl
            tool taper HSK 100/63
            tools in tool magazin 120
            Workpiece storage 12-fach
            Description :
            Vertical Lathe | HESSAP - VDM 800-12

            + driven tools / C-axis
            + gear hobbing equipment


            Additional equipment:

            - CELLRO Toolchanger with a FANUC Robot for tool changing

            - LoadMaster Compact 1150 for storing the workpieces

            The machine is in good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VDM800-12 | VDM 800 12 | VDM800 12
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VTC 250 DUO DD


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1411 · Vertical Turning Machine

          EMAG - VTC 250 DUO DD - - 2007 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine EMAG - VTC 250 DUO DD with
            ITC (7-30 bar) and driven tools

            Additional equipment:

            - Workpiece grippers on all 3 turrets
            - 12-position disc turret for driven tools and VDI 40 tool holders,
            - 12-station disc turret with cross-slot and VDI 40 tool holders,
            - 12-station disc turret for driven tools and VDI 40 tool holders,
            - NC steady rest, self-centering,
            - headstock below,
            - tailstock below,

            - chip conveyor
            - Knoll unit 1.500 l,

            - OP10: Three-jaw chuck Rhöm KFD-N 220/3,
            - OP20: Hainbuch Spanntop pull-back BZI65,
            - Live tool for axial and radial machining,
            - Tool holder with Capto 5 quick change system,
            - Artis as tool and process monitoring,


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VTC 250 DUO ED


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1410 · Vertical Turning Machine

          EMAG - VTC 250 DUO ED - - 2005 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine | EMAG - VTC 250 DUO ED
            with ITC (7-30 bar) and driven tools


            Additional equipment:

            - Workpiece grippers on all 3 turrets,
            - 6-station end-processing turret with HSK tool holder,
            - 12-station disc turret for driven tools and VDI 40 tool holder,
            - 12-position disc revolver with cross slot and VDI 40 tool holder,
            - NC - clamping head,
            - NC bezel, self-centering,
            - EMAG hydraulic double-piston clamping cylinder,
            - tailstock down,
            - Hydraulic double-piston clamping cylinder at the top,
            - chip conveyor,

            - Knoll plant 1.500 l,
            - Coolant supply 7-30 bar,

            - OP20: shaft chuck with retractable jaws and face drivers,
            - Tool holder with Capto 5,
            - Artis quick-change system for tool and process monitoring,
            - Tool pack is included,


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal OKUMA MA-600HB


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1418 · Machining Center - Horizontal

          OKUMA - MA-600HB - - 2005 - OKUMA OSP-P200M

          Technical details
          travel -x axis 1.000 mm︱travel -y axis 900 mm︱travel -z axis 1.000 mm︱control OKUMA OSP-P200M ︱turning speed range - spindle 50 - 12.000 U/min︱spindle diameter 100 mm︱numbers of positions in the tool changer 60 ︱tool taper BT50 ︱table dimension 630 x 630 mm︱max. table load 1.200 kg︱Dimensions (L x W x H) 6.559 x 3.280 x 3.225 mm︱weight of the machine 26.000 kg︱
          Horizontal machining center | OKUMA - OKUMA - MA-600HB equipped with ITC (60 bar), tool changer and measuring system. Additional equipment: + Tool breakage control + Tool length measurement + Probe 3D Renischaw The spindle was renewed 2021! (spindle running time less than 1,000 hours) The machine is in a very well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MA 600 | MA600 | MA 600HB | MA 600 HB
            travel -x axis 1.000 mm
            travel -y axis 900 mm
            travel -z axis 1.000 mm
            control OKUMA OSP-P200M
            turning speed range - spindle 50 - 12.000 U/min
            spindle diameter 100 mm
            numbers of positions in the tool. 60
            tool taper BT50
            table dimension 630 x 630 mm
            max. table load 1.200 kg
            Dimensions (L x W x H) 6.559 x 3.280 x 3.225 mm
            weight of the machine 26.000 kg
            Description :
            Horizontal machining center | OKUMA - OKUMA - MA-600HB
            equipped with ITC (60 bar), tool changer and measuring system.


            Additional equipment:
            + Tool breakage control
            + Tool length measurement
            + Probe 3D Renischaw


            The spindle was renewed 2021!
            (spindle running time less than 1,000 hours)


            The machine is in a very well-maintained condition
            and can be inspected at any time under power.


            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MA 600 | MA600 | MA 600HB | MA 600 HB
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal OKUMA MA-40HA


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1417 · Machining Center - Horizontal

          OKUMA - MA-40HA - - 2000 - OKUMA OSP-U100M

          Technical details
          travel -x axis 560 mm︱travel -y axis 610 mm︱travel -z axis 560 mm︱control OKUMA OSP-U100M ︱turning speed range - spindle 50 - 7.000 U/min︱numbers of positions in the tool changer 60 ︱table dimension (L x W) 400 x 400 mm︱max. table load 400 kg︱Dimensions (L x W x H) 3.990 x 2.490 x 2.720 mm︱weight of the machine 10.000 kg︱
          Horizontal machining center | OKUMA - MA-40HA The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MA 40 | MA40 | MA 40HA | MA 40 HA
            travel -x axis 560 mm
            travel -y axis 610 mm
            travel -z axis 560 mm
            control OKUMA OSP-U100M
            turning speed range - spindle 50 - 7.000 U/min
            numbers of positions in the tool. 60
            table dimension (L x W) 400 x 400 mm
            max. table load 400 kg
            Dimensions (L x W x H) 3.990 x 2.490 x 2.720 mm
            weight of the machine 10.000 kg
            Description :
            Horizontal machining center | OKUMA - MA-40HA


            The machine is in a well-maintained condition
            and can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MA 40 | MA40 | MA 40HA | MA 40 HA
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Trader Profile:   Steinhand GmbH

          Contact Trader



            Steinhand GmbH
           Am Stahlwerk 15
            45527 - Hattingen
            Deutschland
            +49 (0) 2324 / 977 26 - 01">+49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
            info@steinhand.de
            www.steinhand.de

          Profile of Trader

          APPRECIATION, UNCONVENTIONAL SOLUTIONS AND RELIABILITY ARE THE BASIS OF OUR WORK – THAT IS WHAT WE STAND FOR!

          Throughout the years, we have gained extensive experience and competence in the machine dealership. With us, you have a reliable partner at your side when it comes to used machines from the metal processing industry. We have specialized in the trade of lathes-, milling machines, boring machines, presses and entire production lines. Our customers set high expectations, on which we are entitled to live up to.

          You would like to observe our machines under power?

          You do not want to deal with irrelevant circumstances?

          You insist on professional after-sales service?


          Our company guarantees a comprehensive carefree transaction process. We will professionally advise and assist you with word and deeds during the whole duration of the project. Our know-how encompasses a wide range of services ranging from deal-financing though logistics handling over to disassembly or commissioning of the machine at your production site. We are a strong partner, no matter whether it’s at the buying- or selling side!
             

          We stand for reliable used machinery at fair prices and globally satisfied customers.

          Do not hesitate to contact us. We are looking forward to working with you!

          STEINHAND GMBH
          Address:
          Wiehagen 10, D-45472 Muelheim a.d. Ruhr
          Telefon: +49 (0) 208 / 782 39-760
          Fax: +49 (0) 208 / 782 39-685
          Email: info@steinhand.de
          Website: https://www.steinhand.de




          Steinhand GmbH   45527 - Hattingen Am Stahlwerk 15 Deutschland
          Steinhand GmbH

          Am Stahlwerk 15



          Contact Trader


            Steinhand GmbH
           Am Stahlwerk 15
            45527 - Hattingen
            Deutschland
            +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
            info@steinhand.de
            www.steinhand.de
            Contact person:

           




          Machine category


          Auswuchtmaschine - Vertikal · Bandsäge · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · CNC Dreh- und Fräszentrum · CNC Dreh- und Schleifzentrum - vertikal · Doppelspindel-Fräsmaschine · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Flachschleifmaschine · Flachschleifmaschine - Vertikal · Kommissionieranlage - Stapler · Kopfdrehbank · Kurvendrehautomat · Langdrehautomat · Portal - Bearbeitungszentrum · Profilschleifmaschine · Rundschleifmaschine - Außen · Rundtisch · Vertikaldrehmaschine ·