Fine wire drawing machine
Machinelist: Fine wire drawing machine
Fine wire drawing machine
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-103019 · Fine wire drawing machine
HENRICH - 10 Z 16 - - 1976 -
Technical details
MULTIPLE -FINEWIREDRAWING MACHINE constr. Henrich type 10 Z 16 year 1976 working range inlet-Ø 0,12 mm max. finished-Ø 0,04 - 0,018 mm number of drawing dies 16 wire elongation each die 10 % drawing speed 0 - 30 m/sec. injection 380 V, 50 Hz
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403584 · Fine wire drawing machine
HERBORN-BREITENBACH - HT 30.2 V/5 - - 1998 -
Technical details
Fine wire drawing machine Make: HERBORN-BREITENBACH Year of manufacture: 1998 Type: HT 30.2 V / 5 Number of trains: 5 Cross section: 14.5% per train Pulling speed: 0.3 - 6 m / s Working range: NE, iron and metal wire Inlet Ø: max. 3 mm Ø Inlet square. Max. 4.6 mm Main motor: 40.4 kW, 400 V, 50 Hz Power supply: 400 V Weight: approx. 4.5to.
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403414 · Fine wire drawing machine
KOCH - KNF - - 1979 -
Technical details
F I N E W I R E D R A W I N G M A C H I N E Construction: KOCH Year: 1987 number of dies: 15 drawing speed: max. 10 m/sec working range: inlet wire ca. 1,0 - 3,0 mm max. finished wire ca. 0,15 - 1,5 mm complete with spooler
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-103329 · Fine wire drawing machine
KOCH - KTZ III/13 + KHS 800 - - 1987 -
Technical details
FINE WIRE - WET DRAWING MACHINE Construction: KOCH Year: 1987 Typ: KTZ III/13 and KHS 800 Number of draws: 13: 1 - 12 = wet drawing 13. = dry drawing, drum-Ø 450 mm Cross section reduction: 15 - 16% Drawing speed: 0 - 10m / s Working area: Steel, iron and metal wire Inlet Ø: max. 2,2 (2,5) mm Finish Ø: 0,6 - 1,6 mm at 2000 - 1600 N/mm² Ø of drawing discs: 120 mm Main motor: 37 kW, 500, 50 Hz Power supply: 500 V or 380 V via existing transformator Horizontal Spooler: max.1000 kg capacity, spool motor: 11 kW spool sizes: width max. 600 mm Flange Ø core Ø 560 273 560 224 355 200 740 400 820 400 The Line consists of: =============== - overhead pay-off system - drawing machine with 13 drawing dies, Typ KTZ III/13 - horizontal spooler (bobbin winder), Typ KHS 800 - switch cabinet with SIEMENS S 5 control - transformator - hydraulic station Weight: approx. 7,5 to.
- Franz Teutenberg GmbH & Co KG
- Am Nordkanal 34-36
- 47877 Willich
- Deutschland
-
02154 95790
02154 9579 29 -
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
#1132-403586 · Fine wire drawing machine
LUKAS - DCI 11/50 - - 2002 -
Technical details
Fine wire drawing machine Make. Lukas Type. Construction year. 2002 Workspace. infeed max. Ø 1.2 mm finished wire.Ø 0.25 - 0.6 mm The plant consists of: - decoiler for wire coils - Continuous wire annealing - wire drawing machine - Vertical wire spooler Complete with control cabinets Power supply 400V, 50Hz there are several machines available
Trader Profile: Franz Teutenberg GmbH & Co KG
Contact Trader
Am Nordkanal 34-36
47877 - Willich
Deutschland
02154 95790">02154 95790
02154 9579 29
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
Profile of Trader
Franz Teutenberg-Maschinen GmbH & Co KG
Our company Franz Teutenberg GmbH & Co KG was founded in 1966 and since then is specialised in the commerce with second hand machines and installations for rolling mills, semi finishing mills and drawing mills working on wire, bars, sheet and plate, strips and tubes.
We stock more than 100 special machines on a floor area of about 3.000 sqm.
We can offer you new or hardly used machines which have either been sold by their previous owners owing to reorganization measures or original from bankrupts estates. We also stock older special-purpose production machines and installations which can still give many years of service, thus enabling you to achieve a considerable saving in capital expenditure.
In addition, we also offer the mediation:
- of new machines
- of overhauling of machines
- of repair or modernisation of machines.
Adresse
Franz Teutenberg GmbH & Co KG
Am Nordkanal 34-36
D-47877 Willich
(Düsseldorf Flughafen)
Wie Sie zu uns finden
Sie erreichen uns über die A 52 in Richtung Düsseldorf wie folgt: Ausfahrt Willich Schiefbahn, links. Bis zur nächsten Ampelkreuzung, rechts. Vorfahrtsstraße folgen, 2. Straße links (= Am Nordkanal).
Sie erreichen uns über die A 52 in Richtung Mönchengladbach wie folgt: Ausfahrt Willich Schiefbahn, rechts. Bis zur nächsten Ampelkreuzung, rechts. Vorfahrtsstraße folgen, 2. Straße links (= Am Nordkanal).
TOP Manufacturer:
Am Nordkanal 34-36
Contact Trader
Am Nordkanal 34-36
47877 - Willich
Deutschland
02154 95790
02154 9579 29
info@teutenberg-maschinen.com
www.teutenberg-maschinen.com
Contact person: