Franz Teutenberg GmbH & Co KG - Stockist for used machines
Cold Circular Saw
#1132-103475 · Cold Circular Saw
OHLER - KA 1000 - - 1975 -
COLD CIRCULAR SAW Make Ohler Type: KA 1000 Year of construction: 1975 modernized 2014 Working range: material dimension 50 - 425 mm Ø With New adjustable length stop for short lengths Control cabinet with SIEMENS Simatic ET 200M year 2014 Hydraulic station year 2014 Drive motor: 500V, 15kW, 1450rpm, 50Hz with numerous spare parts Weight: approx. 7 to
#1132-403784 · Sawing centre
RATTUNDE - ACS 90/2 - - 2006 -
Sawing plant Fabr. Rattunde Type. ACS 90/2 Construction year. 2006 designed for sawing round tubes and solid material Working area: pipe and solid material Ø 10 - 100 mm, Wall thickness: 0.5 mm up to solid material Output: max. 1500 pieces / h Raw material: up to 12 meters Cut lengths: 25mm - 150mm; 150 mm - 2000 mm complete system consisting of: - Feed trough with separation and light barrier - Infeed roller table - sawing plant - chip conveyor - Double-sided Chamfering Machine - washing unit - Robots for removal and packaging of the Finished material Connection data: 3x400 VAC 50Hz Total weight of the system: 26,000 kg more photos on request
#1132-103555 · Sawing centre
RATTUNDE - ACS 90/2 - - 2005 -
Sawing plant Fabr. Rattunde Type. ACS 90/2 Construction year. 2005 made for sawing one, two or three tubes (bars)simultaneously Working range: tube and full material: Ø 10 - 90 mm capacity: max. 2.500 pieces/hour with single cutting double-cut: max. 5 000 piecec/hour triple-cut: max. 6 250 pieces/hour Raw material: up to 12 meters Cut lengths: 100 mm - 2000 mm complete system consisting of: - Feed trough with separation and light barrier - Infeed roller table - sawing plant - chip conveyor - Double-sided brushing system - extraction system - car wash - Robots for the removal and packaging of the Finished material Connection data: Power kW 130 Mains voltage AC 3x400V Total weight of the system: 33 000 kg
Tube Drawing Machine
#1132-403524R · Tube Drawing Machine
Haginger - 250/3 - - 1981/2006 -
Triple drawing chain bench for tubes and bars with Pre-banch Make: Haginger Type: 250/3 Year: 1981/2006 Traction: 25 tons. Suitable for. Single, double,triple draw Working range: Ø 12-80 mm tubes 12-50 mm bars Drawing speed: continuously 2 to 60 m / min Rewind speed. Max. 120 m / min pre-tube 12.5 meter Drawing length: max.15 meter Electric: Siemens S7 Main motor: 200 kW Operating voltage: 400 V, 50 Hz Control voltage: 24 V There are 4 saws integrated in this line. a matching tube pointer (for tag ends on thin-wall tubestubes) can be supplied The equipment is in excellent condition.
Butt welding machine
#1132-103410 · Butt welding machine
SCHLATTER - EA-2 - - 1980 -
Butt Welding Machine with reannealing unit, grinding stone and shears on moveable underframe Manufacturer Schlatter Type EA-2 Power 10kVA Working range max.Ø 6 mm min.Ø 1 mm Injection 380 V, 50 Hz
Combined drawing machine
#1132-103530 · Combined drawing machine
SCHUMAG - Gr IIb - - 1980 -
horizontal and vertical pre-straightener (driven) Fabr. Schumag
#1132-103401 · Combined drawing machine
SCHUMAG - KZ-RP 0B - - 1970 -
Combined Drawing Machine with a double-sided Chamfering Machine Construction: Schumag Type: KZ - RP- 0B Year: 1970 / 1971 Working range: Steel 2 - 7,5 mm Ø NE 2 - 9 mm Ø Drawing force: 1,5 tons Speed: (15/40/60 m/min.) The line consists of: - pre-straightener, horizontal and vertical - Drawing Machine (motor: 380V 50Hz 22kW) - horizontal and vertical straightening device - flying shear - Straightening and Polishing Machine (motor: 380V 50Hz 11kW) - cleaning unit for construction Turbo Separator (for Ripo) - Double-sided Chamfering Machine - Construction: Ris Ingold (twice chamfering, once sawing) - electrical cabinet
Fine wire drawing machine
#1132-403586 · Fine wire drawing machine
LUKAS - DCI 11/50 - - 2002 -
Fine wire drawing machine Make. Lukas Type. Construction year. 2002 Workspace. infeed max. Ø 1.2 mm finished wire.Ø 0.25 - 0.6 mm The plant consists of: - decoiler for wire coils - Continuous wire annealing - wire drawing machine - Vertical wire spooler Complete with control cabinets Power supply 400V, 50Hz there are several machines available
#1132-403783 · Pointing machine
KROLLMANN - FM-H-4 - - 2000 -
POINTING - MILLING MACHINE FOR BARS Fabr.: Krollmann Type: FM H4 year: 2000 Pointing Milling machine with 4 pieces hard-metal turn-over plates working range: round + profile + square: 80 (100) to 25 mm Ø Milling drive: 380 / 420 V. 18,5 kW, 50 Hz, 1465 rpm Machine consists of: - pointing milling machine with oil mist exhauster with hydraulical clamping and pusher device - hydraulic control unit - cooling medium tank with chip box - command desk - electrical cabinet with air condition, SIEMENS S 7-300 control
#1132-103478 · Winder
BONGARD - FW-50/II - - 1980 -
Wire Coiler (Static Coiler) Constr. Bongard Type: FW-50/II Year: 1980 Winding disc Ø 400 mm The coiler is suitable for small casks. Outer: Ø max. 500 mm casks height: max. 750 mm or small coiling devices Drive motor: 500 Volt, 4kW, 1435 rpm
#1132-103479 · Winder
BONGARD - TS-600 - - 1980 -
Vertical Static Coiler Make Bongard Type: NS 600 Year of construction: 1980 Working range: For steel wire Ø 1.5 - 3.5 mm Winding speed: Infinitely variable up to 16 m / sec Main motor: 380V, 50Hz, 11kW Complete with control cabinet
Wire Drawing Machine
#1132-103502 · Wire Drawing Machine
BREITENBACH - UB 1 mit Wickler - - 1973 -
VERTICAL DRAWING MACHINE WITH COIL WINDER Constr.: Breitenbach Working range: 1.6 - 4 mm Ø Drawing speed: steplessly, frequency controlled 3 - 15m/sec The machine consists of: ========================= - 2 x vertical Bullblock, Typ UB 1 drawing drum- Ø 600 mm drive motor, each 30 kW - hanging coil winder, type UW 600 (700) winding disks Ø 600 and 700 mm drive motor 5,5 kW - electrical cabinet: 380 V, 50 Hz
#1132-103523 · Wire Drawing Machine
HERBORN - HG 10 - - 1971 -
Vertical Wire Drawing Machine with laying spooler Drawing Machine Construction: Herborn Type: HG 10 Year: 1971 (renovated in 2006) Working range: max. 16 mm Ø working with steel max. 26 mm Ø working with copper (produced last round and square) drawing force: 10 tons drum diabmeter: 700 mm drawing speed: max. 100 m/min frequency controlled Main motor: 380-420V, 50Hz, 75kW laying spooler Construction: Erkelenz Type: Year: 2006 Coil weight max. 2 tons drive motor: 380V 7,5 kW complete electrics 2006 with Siemens S7 control More pictures on request
Wire Straightening and Cutting Machine
#1132-103297 · Wire Straightening and Cutting Machine
KOCH - D 5 - F - - 1974 -
WIRE STRAIGHTENING AND CUTTING MACHINE with flying shear constr. KOCH type D 5 - F year 1974 working range 5 - 17 mm Ø straightening tolerance: +/- 0,5 mm / m at 1 000 N/mm² drawing speed variable-speed drive approx. 60 m/min bar length 5 m Drive flying shear 11 kW, 380 V, 50 Hz Drive straightener 45 kW, 1480 rpm, 380 V, 50 Hz Tracked transport between straightener and flying shear. The machine is equipped with: autom. wire feeding, straightening and pay-off machine Constr. KOCH Type DZA/20 for 1000 kg Coils The line consists of: - autom. wire feeding and pay-off machine, constr. Koch - straightening and cutting machine, constr. Koch - run-out table for finished material up to 5 m - electrical cabinet and command desk - various spare parts, for example: a second straightening device; spare main motor total weight of the complete line approx. 15 to. Video: a video showing the line in production is being exposed on our website.
7-roll tube straightening machine
#1132-103469R · 7-roll tube straightening machine
MANNESMANN-MEER - KR 100 ST - - 1978/2002 -
7-rolls straightener for bars and tubes Manufacturer: Mannesmann Meer Type: KR 100 ST Working range: tube. 30 - 120 mm bar. 30 - 75(85) mm The plant consists of: - Inlet channel up to approx. 6 meters material length - Driving duo: make KIESERLING - Straightening machine with electric straightening roller adjustment and hydraulic straightening roller clamping - Drive motor with gearbox (infinitely variable speed control wish frequency converter) - Hydraulic station for straightening roller clamping - Switch cabinet - Control panel Main engine. 45 kW, 400 V, 50 Hz Total weight. Approx. 13 to.
Folding tag pointer
#1132-103468 · Folding tag pointer
BUELTMANN - HAP 20 - - 1990 -
Folding tag pointer for tubes Fabr. Bültmann Type. HP 20 Year. 1990 Workspace: 5 - 20 mm dia. Angel length: 50 - 100mm Hydraulic motor. 380/660V, 50Hz, 11kW, 1460U/min 440V, 60Hz, 12,6kW, 1760U/min Total weight. 1,4 ton.
#1132-103419 · Folding tag pointer
KROLLMANN - HRA 30/20-3 - - 1981 -
Hydraulic tube-pointing press with notching device Constr. Krollmann Type. HRA 30 / 20-3 Year. 1981 The pointing press is for the production of drawing-out devices of tubes Max. Outside Ø of the tube 30 mm Pressure force. 00 kN at 250 bar Tool length. 250 mm Hydraulic drive. 5.5kW, 1500 rev / min Operating voltage. 500V AC, 50Hz Total weight of the system. about 1.6 tons.
#1132-103418 · Folding tag pointer
KROLLMANN - HRA 30/20-3 - - 1981 -
Hydraulic tube-pointing press with notching device Fabr. Krollmann Type. HRA 30 / 20-3 Year. 1981 The pointing press is for the production of drawing-out devices of tubes Max. Outside Ø of the tube 30 mm Pressure force. 00 kN at 250 bar Tool length. 250 mm Hydraulic drive. 5.5kW, 1500 rev / min Operating voltage. 500V AC, 50Hz Total weight of the system. about 1.6 tons.
7-roll bar straightening machine
#1132-103469 · 7-roll bar straightening machine
MANNESMANN-MEER - KR 100 ST - - 1978 -
7-rolls straightener for bars and tubes Constructor: Mannesmann Meer Type: KR 100 ST Year: 1978 / 2002 Working range: tube: 30 - 120 mm bar: 30 - 75 (85)mm The plant consists of: - Inlet channel - Driving duo: make KIESERLING - Straightening machine with electric straightening roller adjustment and hydraulic straightening roller clamping - Drive motor with gearbox (infinitely variable speed control with frequency converter) - Hydraulic station for straightening roller clamping - Electrical cabinet - Control panel More pictures on request. Main engine. 45 kW, 400 V, 50 Hz Total weight: approx.13 to.
#1132-403779 · Draw bench
Haginger - 102 - - 2002 -
Bar drawing machine with hydr. Pusher pointer (Chain drawing bench) for bars and profiles Fabr. Haginger Type. 102 Construction year. 10.2002 drawing force 60 to. Drawing area: up to 150 X 50 mm drawing speed. 0-40 m / min Draw length: max. 14 meters Main drive. 129 kW electrical cabinet with Siemens SIMATIC S7-200 Finished material storage. right and left with ultrasonic testing device, make Autec, manufactured in 2006 Finally, bar profiles (linear guide rails) were manufactured on it complete system
#1132-403524 · Draw bench
Haginger - 250/3 - - 1981 -
Triple drawing chain bench for tubes and bars with Pre-banch Make: Haginger Type: 250/3 Year: 1981/2006 Traction: 25 tons. Suitable for. Single, double,triple draw Working range: Ø 12-80 mm tubes 12-50 mm bars Drawing speed: continuously 2 to 60 m / min Rewind speed. Max. 120 m / min Pre-tube 12.5 meter Drawing length: max. 15 meter Electric: Siemens S7 Main motor: 200 kW Operating voltage: 400 V, 50 Hz Control voltage: 24 V There are 4 saws integrated in this line. a matching tube pointer (for tag ends on thin-wall tubestubes) can be supplied The equipment is in excellent condition.
#1132-103380 · Profile straightener
KIESERLING - ESRH 1 A - - 1967 -
HORIZONTAL PROFILE ROLLER STRAIGHTENING MACHINE The machine is for straightening square, hexagons, flats and angles. constr.: KIESERLING year: 1967 type: ESRH 1 A condition: good working range: squares, hexagons (SW) 17 – 52 mm flats 18x5 - 50x25 mm flats in one level max. 120 x 20 mm speed: 50 m/min. bar length: approx. 5.000 mm numbers of straightening rollers. 9 plus 1 signing roller on inlet side distance between rollers in mm : above 0 225 0 200 0 175 0 below: 0 240 0 210 0 190 0 160 0 working direction: left/right three-phase motor: 15 kW, 965 rpm, 220/380 V, 50 Hz DELIVERY SCOPE - main machine body with gear box and motro, command device. - Inklusive: 2 sets of spare straightening rollers Video: as exposed on our website. Dimensions main machine body: approx. mm: height 1680, width 1400, depth 1200 Total weight: approx. 5,9 to.
#1132-403780 · Pointer
KROLLMANN - Flachanwalzen - - ca. 1978 -
Pointing roller for flat material Fabr. Krollmann max.material thickness 24 mm Usable width 3 times 170 mm with two scissors Main drive 400V, 11 kW, 50 Hz
Test cut-off machine
#1132-103405 · Test cut-off machine
SCHUMAG - Brechvorrichtung Gr. 2 - - 1975 -
breaking device to detect internal flaws in extruded non-ferrous metal rods Constr. Schumag Type. Gr.2 Year. 1975 Working range: 10 - 45 mm Simple and robust device for refracting rods about the fracture surface to be examined for internal defects. Weight about 3 tons.
Trader Profile: Franz Teutenberg GmbH & Co KG
Profile of Trader
Franz Teutenberg-Maschinen GmbH & Co KG
Our company Franz Teutenberg GmbH & Co KG was founded in 1966 and since then is specialised in the commerce with second hand machines and installations for rolling mills, semi finishing mills and drawing mills working on wire, bars, sheet and plate, strips and tubes.
We stock more than 100 special machines on a floor area of about 3.000 sqm.
We can offer you new or hardly used machines which have either been sold by their previous owners owing to reorganization measures or original from bankrupts estates. We also stock older special-purpose production machines and installations which can still give many years of service, thus enabling you to achieve a considerable saving in capital expenditure.
In addition, we also offer the mediation:
- of new machines
- of overhauling of machines
- of repair or modernisation of machines.
Franz Teutenberg GmbH & Co KG
Am Nordkanal 34-36
Wie Sie zu uns finden
Sie erreichen uns über die A 52 in Richtung Düsseldorf wie folgt: Ausfahrt Willich Schiefbahn, links. Bis zur nächsten Ampelkreuzung, rechts. Vorfahrtsstraße folgen, 2. Straße links (= Am Nordkanal).
Sie erreichen uns über die A 52 in Richtung Mönchengladbach wie folgt: Ausfahrt Willich Schiefbahn, rechts. Bis zur nächsten Ampelkreuzung, rechts. Vorfahrtsstraße folgen, 2. Straße links (= Am Nordkanal).
Am Nordkanal 34-36
Am Nordkanal 34-36
47877 - Willich
02154 9579 29