European network of stockholding machinery dealers
What search term would you use to search for this machine?
Bed Type Milling Machine - Universal
PARPAS SHARK One
FLECKENSTEIN Werkzeugmaschinen GmbH
Sommerweg 15 · 63831 - Wiesen+49 (0) 6096 9706 0
+49 (0) 6096 9706 20
www.fleckenstein-machine.com
Machine data
Machine photos
Document
Keine weiteren Dokumente vorhandenTechnical details
| x-travel | 3500 mm |
| y-travel | 1083 mm |
| z-travel | 1074 mm |
| control | HEIDENHAIN iTNC 530 HSCI |
| clamping table | - |
| surface area | 4.000 x 1.000 mm |
| Thread bore with fitting | - |
| Feeds | - |
| X-, Y- and Z-axis, stepless | 2 - 30.000 mm/min |
| rapid travel x/y/z | 30 m/min |
| Max. feed force of axis | 10.000 N |
| 2-axis Milling Head | - |
| 2-axis milling head TUB-E92 with power on | - |
| Torque-Motors for 5-axis-simultaneos processing | - |
| capacity at 100% load | 29 kW |
| Speed stepless | 2- 30.000 |
| max. torque | 92 Nm |
| Max. torque | 60 min-1 |
| tool taper | HSK 62A-DIN 69893 |
| automatic tool changer ATC | - |
| Tool places | 30 |
| diameter of tools max. | 90 mm |
| workpiece length | 320 mm |
| weight of tools max. | 8 kg |
| changing positions | vertikal |
| electrical supply data | - |
| capacity | 120 A |
| voltage | 400 V |
| operating frequency | 50 Hz |
| total power requirement | 29 kW |
| weight of the machine ca. | 28 t |
| dimensions of the machine ca. | 8,3 x 6,7 x 3,6 m |
Videos
Additional information
Equipment
• Machine bed, column and vertical saddle as welded steel construction,
annealed with low tension
• Milling slider as welded steel construction
• Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive
via torque motors
• Oil cooling unit for cooling the milling head
• CNC thermal compensation
• Spindle drive 29 kW
• Spindle speed max. 18.000 min-1
• Axle drives by means of precision ball screws and digital servo motors
• Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and
automatic measuring cycles
• Milling head Measurement “Kinematics Opt”
• Laser tool presetter BLUM - NT version mounted on machine table
• CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology
• Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable
• swivelling control panel for machine operation in front of the machine
• Automatic tool changer with 30 magazine places, change position vertical
• Coolant system with external shower rim and IKZ through the spindle
• 1 chip conveyor in the working area, ejection right
• Pretensioned linear guides in all axes
• Precision ball screws in Y- and Z-axis
• X-axis drive via gear rack and master/slave drive
• Hydraulic weight compensation in the vertical axis
• Bellows cover of the X-axis
• Milling slide above and below in the vertical axis with bellows covers
with attached stainless steel lamellas closed
• Work area enclosure closed on all sides. Back side of the work area with
bellows cover with attached stainless steel lamellas closed. The manual sliding
doors on the front of the machine can be opened and closed over the entire
length of the table.
Safety fencing for the back machine area with two secured access doors.
• Machine bed, column and vertical saddle as welded steel construction,
annealed with low tension
• Milling slider as welded steel construction
• Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive
via torque motors
• Oil cooling unit for cooling the milling head
• CNC thermal compensation
• Spindle drive 29 kW
• Spindle speed max. 18.000 min-1
• Axle drives by means of precision ball screws and digital servo motors
• Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and
automatic measuring cycles
• Milling head Measurement “Kinematics Opt”
• Laser tool presetter BLUM - NT version mounted on machine table
• CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology
• Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable
• swivelling control panel for machine operation in front of the machine
• Automatic tool changer with 30 magazine places, change position vertical
• Coolant system with external shower rim and IKZ through the spindle
• 1 chip conveyor in the working area, ejection right
• Pretensioned linear guides in all axes
• Precision ball screws in Y- and Z-axis
• X-axis drive via gear rack and master/slave drive
• Hydraulic weight compensation in the vertical axis
• Bellows cover of the X-axis
• Milling slide above and below in the vertical axis with bellows covers
with attached stainless steel lamellas closed
• Work area enclosure closed on all sides. Back side of the work area with
bellows cover with attached stainless steel lamellas closed. The manual sliding
doors on the front of the machine can be opened and closed over the entire
length of the table.
Safety fencing for the back machine area with two secured access doors.
On this page you will find a an offer on a used Bed Type Milling Machine - Universal of type SHARK One of the company PARPAS with year of construction 2016 and with stock no.: 1118-1592. The machine is manufactured by the company FLECKENSTEIN Werkzeugmaschinen GmbH from 63831 Wiesen offered. The delivery time / delivery status for this machine is: immediately For more information, please refer to the details listed.
Documents & Videos
Keine weiteren Dokumente vorhanden
Machine
Bed Type Milling Machine - Universal
