control | ELECTRO PILOT turn plus |
centre height | 260 mm |
turning length | 640 mm |
swing diameter over slide rest | 290 mm |
greates pass round over bed | 500 mm |
diameter of spindle flange | 140 h5 mm |
spindle diameter in front bearing | 100 mm |
spindle bore | 72 mm |
hollow spindle diameter | 65 mm |
max. torque on the spindle | 150 Nm |
longitudinal stroke | 650 mm |
chucking diameter | max. 250 mm |
face stroke | 212 |
tailstock quill diameter | 80 mm |
tailstock quill taper MT | 4 |
tailstock travel | 100 mm |
feeds - longitudinal | 0,5 - 5000 mm/min |
feeds - cross | 0,5 - 5000 mm/min |
rapid travel - longitudinal/face | 10 m/min |
power feed longitudinal | 8000 N |
power feed coss | 5000 N |
thread pitch max. | 100 mm |
spindle turning speed range | 20 - 5000 U/min |
Turning Speed - Range 1 | 20 - 1250 U/min. |
spindle drive, 2-steps | 22 kW |
3,30 x 1,80 x 1,90 m | |
Dimension coolant reservoir | 1,20 x 0,80 x 1,00 mm |
weight of the machine ca. | 5 t |
Weight of cooling unit | 0,15 t |
On this page you will find a an offer on a used CNC Lathe of type CTX 400 of the company GILDEMEISTER with year of construction 1996 and with stock no.: 1105-03404. The machine is manufactured by the company FIMOTEC from 67500 HAGUENAU offered. The delivery time / delivery status for this machine is: sofort For more information, please refer to the details listed.