Wie können wir Ihnen helfen? / How can we help you?
4 side moulder
WEINIG Powermat 500 m. Mechanisierung
Gebr. Engelfried oHG
Elisabethenstr. 41 · 73432 - Aalen(0049)07361-98660
(0049)07361-8431
www.engelfried.com
Machine data
Machine photos
Document
Technical details
| Number of spindles | 5 St. |
| Working width | 230 mm |
| Working height | 120 mm |
| Length of the planing table | 2500 mm |
| Feed motor | 4 kW |
| Feed speed | 5-30 m/min. |
| Control | Memory-Funktion |
Videos
Keine Video-Dateien vorhandenAdditional informatio
Weinig Powermat 500, manufactured in 2010
----------------------------------------
with infeed and outfeed mechanization
Powermat 500 technology
----------------------------------------
5 spindles
Working width: 230 mm
Working height: 120 mm
Feed: 4 kW, 5-30 m / min electronically frequency-controlled
Planing table: 2500 mm
1st spindle below, 7.5 kW, diameter 40 mm, 8,000 rpm
2nd right spindle, 7.5 kW, Powerlock / HSK, 8,000 rpm
3rd spindle left, 11.0 kW, Powerlock / HSK, 8,000 rpm
4. Spindle above, 11.0 kW, Powerlock / HSK, 8,000 rpm
5. Lower spindle, 7.5 kW, Powerlock / HSK, 8,000 rpm
3rd spindle with motorized axis adjustment radial (width)
4th spindle with motorized axis adjustment radial (height)
Motorized axis adjustment and positioning of the feed high-low
Including existing tools and HSK spindles / PowerLock spindles
Including mechanization, consisting of:
- driven infeed conveyor
- Push-off device (automatic push-off of the timber from the infeed belt onto
the
Planing table of the machine)
- Longitudinal-transverse longitudinal conveyor after the machine (for
returning the parts to the
Operator)
- 1st driven return conveyor
- 2nd driven return conveyor
(technical information according to the manufacturer - without guarantee!)
----------------------------------------
with infeed and outfeed mechanization
Powermat 500 technology
----------------------------------------
5 spindles
Working width: 230 mm
Working height: 120 mm
Feed: 4 kW, 5-30 m / min electronically frequency-controlled
Planing table: 2500 mm
1st spindle below, 7.5 kW, diameter 40 mm, 8,000 rpm
2nd right spindle, 7.5 kW, Powerlock / HSK, 8,000 rpm
3rd spindle left, 11.0 kW, Powerlock / HSK, 8,000 rpm
4. Spindle above, 11.0 kW, Powerlock / HSK, 8,000 rpm
5. Lower spindle, 7.5 kW, Powerlock / HSK, 8,000 rpm
3rd spindle with motorized axis adjustment radial (width)
4th spindle with motorized axis adjustment radial (height)
Motorized axis adjustment and positioning of the feed high-low
Including existing tools and HSK spindles / PowerLock spindles
Including mechanization, consisting of:
- driven infeed conveyor
- Push-off device (automatic push-off of the timber from the infeed belt onto
the
Planing table of the machine)
- Longitudinal-transverse longitudinal conveyor after the machine (for
returning the parts to the
Operator)
- 1st driven return conveyor
- 2nd driven return conveyor
(technical information according to the manufacturer - without guarantee!)
On this page you will find a an offer on a used 4 side moulder of type Powermat 500 m. Mechanisierung of the company WEINIG aus dem Jahr neuwertig with stock no.: 1305-2566. The machine is manufactured by the company Gebr. Engelfried oHG from 73432 Aalen offered. The delivery time / delivery status for this machine is: immediately For more information, please refer to the details listed.
Machine
4 side moulder
