European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Emuk Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe COLCHESTER Mastiff 1800


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22044 · Center Lathe

          COLCHESTER - Mastiff 1800 - - 1992 -

          Technical details
          turning diameter over bed 554 mm︱turning diameter over slide rest 370 mm︱turning length 1500 mm︱throat 830 mm︱spindle bore 90 mm︱spindle turning speed - stepless 18 - 1800 U/min︱upper slide-support 190 mm︱face slide travel 300 mm︱total power requirement kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 3,1 x 1,2 x 1,6 m︱
            turning diameter over bed 554 mm
            turning diameter over slide rest 370 mm
            turning length 1500 mm
            throat 830 mm
            spindle bore 90 mm
            spindle turning speed - stepless 18 - 1800 U/min
            upper slide-support 190 mm
            face slide travel 300 mm
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 3,1 x 1,2 x 1,6 m
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe VOEST-ALPINE-STEINEL W 570/ E 50 / 2


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2031 · CNC Lathe

          VOEST-ALPINE-STEINEL - W 570/ E 50 / 2 - - 1991 - 805

          Technical details
          turning diameter 570 mm︱turning length 2000 mm︱control 805 ︱spindle bore 66 mm︱greates pass round over bed 340 mm︱turning speeds 1 - 2500 U/min︱centre height 280 mm︱total power requirement 15 kW︱weight of the machine ca. 3,5 t︱dimensions of the machine ca. 3,8 x 1,7 x 1,8 m︱
          2 lynets Roehm Duro T 250 3-jaw chuck Roehm 4-jaw chuck Lots of jaws and tool holders
            turning diameter 570 mm
            turning length 2000 mm
            control 805
            spindle bore 66 mm
            greates pass round over bed 340 mm
            turning speeds 1 - 2500 U/min
            centre height 280 mm
            total power requirement 15 kW
            weight of the machine ca. 3,5 t
            dimensions of the machine ca. 3,8 x 1,7 x 1,8 m
            Description :
            2 lynets
            Roehm Duro T 250 3-jaw chuck
            Roehm 4-jaw chuck
            Lots of jaws and tool holders
          16.800 €
          Datasheet
          Request / Contact

          lathe-conventional-electronic

          used  lathe-conventional-electronic BOLEY Unbekannt


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2199 · lathe-conventional-electronic

          BOLEY - Unbekannt - - -

          Technical details
          turning diameter 250 mm︱turning length 500 mm︱swing diameter over bed slide mm︱spindle turning speed range 112 - 3550 U/min︱centre height 125 mm︱chucking diameter 110 mm︱total power requirement kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. m︱
            turning diameter 250 mm
            turning length 500 mm
            spindle turning speed range 112 - 3550 U/min
            centre height 125 mm
            chucking diameter 110 mm
            weight of the machine ca. 0,8 t
          Datasheet
          Request / Contact

          Deephole Boring Machine

          used  Deephole Boring Machine TBT T 30-250


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1934 · Deephole Boring Machine

          TBT - T 30-250 - - 1971 -

          Technical details
          bore depth 250 mm︱number of spindles 1 ︱core drilling diameter max. 1 - 30 mm︱total power requirement 20 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 3,2 x 2,8 x 2,0 m︱
          Many accessories.
            bore depth 250 mm
            number of spindles 1
            core drilling diameter max. 1 - 30 mm
            total power requirement 20 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 3,2 x 2,8 x 2,0 m
            Description :
            Many accessories.
          Datasheet
          Request / Contact

          High-Speed Radial Drilling Machine

          used  High-Speed Radial Drilling Machine HKS 40 F


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2032 · High-Speed Radial Drilling Machine

          HKS - 40 F - - 1990 -

          Technical details
          bore capacity in steel (diameter) 40 mm︱arm length 392 - 1117 mm︱workpiece height max. 330 - 750 mm︱spindle turning speed range 186 - 3150 U/min︱total power requirement 5 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 2,5 x 1,5 x 2,2 m︱
          Left / right rotation. Lots of accessories!
            bore capacity in steel (diameter. 40 mm
            arm length 392 - 1117 mm
            workpiece height max. 330 - 750 mm
            spindle turning speed range 186 - 3150 U/min
            total power requirement 5 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 2,5 x 1,5 x 2,2 m
            Description :
            Left / right rotation.
            Lots of accessories!
          Datasheet
          Request / Contact

          Upright Drilling Machine

          used  Upright Drilling Machine MAXION BS 50 RVST


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2078 · Upright Drilling Machine

          MAXION - BS 50 RVST - - -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 220 mm︱bore stroke 200 mm︱total power requirement kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 2,0 x 1,0 x 2,2 m︱
            bore capacity in steel (diameter. 50 mm
            throat 220 mm
            bore stroke 200 mm
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 2,0 x 1,0 x 2,2 m
          Datasheet
          Request / Contact
          used  Upright Drilling Machine Matheys unb.


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2053 · Upright Drilling Machine

          Matheys - unb. - - -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 0 - 400 mm︱bore stroke 80 mm︱table surface area 850 x 300 mm︱turning speeds 125 - 1480 U/min︱drilling head vertical adjustable 160 mm︱table movement - manual 300 mm︱table travel longitudinal 230 mm︱table travel cross 500 mm︱total power requirement kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. 2,0 x 1,8 x 2,2 m︱
          Left / right rotation, automatic cross feed.
            bore capacity in steel (diameter. 40 mm
            throat 0 - 400 mm
            bore stroke 80 mm
            table surface area 850 x 300 mm
            turning speeds 125 - 1480 U/min
            drilling head vertical adjustabl. 160 mm
            table movement - manual 300 mm
            table travel longitudinal 230 mm
            table travel cross 500 mm
            weight of the machine ca. 1,8 t
            dimensions of the machine ca. 2,0 x 1,8 x 2,2 m
            Description :
            Left / right rotation, automatic cross feed.
          Datasheet
          Request / Contact

          Universal Milling Machine

          used  Universal Milling Machine DECKEL FP 3 NC


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22048 · Universal Milling Machine

          DECKEL - FP 3 NC - - - Dialog 3

          Technical details
          x-travel 400 mm︱y-travel 400 mm︱z-travel 400 mm︱Control Dialog 3 ︱quill stroke 80 mm︱spindle turning speed - stepless 0 - 3150 U/min︱total power requirement kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 1,8 x 1,4 x 1,9 m︱
            x-travel 400 mm
            y-travel 400 mm
            z-travel 400 mm
            Control Dialog 3
            quill stroke 80 mm
            spindle turning speed - stepless 0 - 3150 U/min
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. 1,8 x 1,4 x 1,9 m
          Datasheet
          Request / Contact

          Bevel Gear Shaping Machine

          used  Bevel Gear Shaping Machine H & H 60 HS 3


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2061 · Bevel Gear Shaping Machine

          H & H - 60 HS 3 - - -

          Technical details
          max. wheel diameter 25 / 600 mm︱gear width 0 -90 mm︱max. module 10 ︱min. module 1,5 ︱min/max. pitch cone angle 5 - 90 °︱tooth length 90 mm︱stroke 0 - 100 mm︱total power requirement 7,5 kW︱weight of the machine ca. 6,1 t︱dimensions of the machine ca. 3,0 x 2,4 x 1,8 m︱
          Equipment: Change gears, planer knives, setting devices, clamping devices, ...
            max. wheel diameter 25 / 600 mm
            gear width 0 -90 mm
            max. module 10
            min. module 1,5
            min/max. pitch cone angle 5 - 90 °
            tooth length 90 mm
            stroke 0 - 100 mm
            total power requirement 7,5 kW
            weight of the machine ca. 6,1 t
            dimensions of the machine ca. 3,0 x 2,4 x 1,8 m
            Description :
            Equipment:
            Change gears, planer knives, setting devices, clamping devices, ...
          Datasheet
          Request / Contact

          Gear Grinding Machine

          used  Gear Grinding Machine HOEFLER Helix 400 K


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22002 · Gear Grinding Machine

          HOEFLER - Helix 400 K - - 2002 - Hoefler BWO

          Technical details
          max. wheel diameter 400 mm︱gear width 260 mm︱max. module 12 ︱min. module 0,5 ︱grinding length 260 mm︱grinding width mm︱workpiece height 420 mm︱control Hoefler BWO ︱max.helical angle +/- 45 °︱grinding wheel diameter 80 - 300 mm︱grinding wheel width 30 (15/40) ︱spindle turning speed - stepless 0 - 5400 U/min︱total power requirement kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. 4,4 x 5,0 x 2,4 m︱
          Compact profile grinding machine Helix 400 Including a gap sensor Dressing roller 160 mm diameter Very nice condition, grinding charts on demand, model "K" with spindle-option!
            max. wheel diameter 400 mm
            gear width 260 mm
            max. module 12
            min. module 0,5
            grinding length 260 mm
            workpiece height 420 mm
            control Hoefler BWO
            max.helical angle +/- 45 °
            grinding wheel diameter 80 - 300 mm
            grinding wheel width 30 (15/40)
            spindle turning speed - stepless 0 - 5400 U/min
            weight of the machine ca. 10,5 t
            dimensions of the machine ca. 4,4 x 5,0 x 2,4 m
            Description :
            Compact profile grinding machine Helix 400
            Including a gap sensor
            Dressing roller 160 mm diameter
            Very nice condition, grinding charts on demand, model "K" with spindle-option!
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Horizontal

          used  Gear Hobbing Machine - Horizontal BARBER COLMAN 16 - 16


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1929 · Gear Hobbing Machine - Horizontal

          BARBER COLMAN - 16 - 16 - - ca.1980 -

          Technical details
          max. wheel diameter 406 mm︱gear width 420 mm︱max. module 4,3 ︱min. module 0,5 ︱hob turning speeds 49 - 246 U/min︱table hole 80 mm︱total power requirement kW︱weight of the machine ca. 6,8 t︱dimensions of the machine ca. 2,8 x 1,6 x 2,2 m︱
          Many accesories!
            max. wheel diameter 406 mm
            gear width 420 mm
            max. module 4,3
            min. module 0,5
            hob turning speeds 49 - 246 U/min
            table hole 80 mm
            weight of the machine ca. 6,8 t
            dimensions of the machine ca. 2,8 x 1,6 x 2,2 m
            Description :
            Many accesories!
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal KOEPFER 153 B


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1995 · Gear Hobbing Machine - Horizontal

          KOEPFER - 153 B - - 1981 -

          Technical details
          max. wheel diameter 80 / 142 mm︱gear width 220 / 300 mm︱max. module 2 ︱min. module 0,3 ︱Control ︱turning speeds 210 - 1680 U/min︱total power requirement 2,2 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. 2,0 x 1,5 x 2,2 m︱
          Machine with loading / unloading system.
            max. wheel diameter 80 / 142 mm
            gear width 220 / 300 mm
            max. module 2
            min. module 0,3
            turning speeds 210 - 1680 U/min
            total power requirement 2,2 kW
            weight of the machine ca. 2,4 t
            dimensions of the machine ca. 2,0 x 1,5 x 2,2 m
            Description :
            Machine with loading / unloading system.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal KOEPFER 136


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E21105 · Gear Hobbing Machine - Horizontal

          KOEPFER - 136 - - 1973 -

          Technical details
          max. wheel diameter 70 mm︱gear width 75 mm︱max. module 1,25 ︱min. module 0,3 ︱turning speeds 222 - 1410 U/min︱min. number of teeth 3 ︱total power requirement 1,1 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 0,9 x 0,6 x 1,5 m︱
            max. wheel diameter 70 mm
            gear width 75 mm
            max. module 1,25
            min. module 0,3
            turning speeds 222 - 1410 U/min
            min. number of teeth 3
            total power requirement 1,1 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 0,9 x 0,6 x 1,5 m
            Description :

          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal PFAUTER P 160 H


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2194 · Gear Hobbing Machine - Horizontal

          PFAUTER - P 160 H - - -

          Technical details
          max. wheel diameter 160 mm︱gear width 355 mm︱max. module 4,5 ︱min. module 0,5 ︱centre distance 450 mm︱taper MK 3 ︱shifting 70 mm︱turning speeds 70 - 320 U/min︱total power requirement 11 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 3,1 x 3,0 x 2,0 m︱
          Machine suitable for the production of Straight spur gears, helical gears, worm gears. Equipment: Complete set of change gears, manuals.
            max. wheel diameter 160 mm
            gear width 355 mm
            max. module 4,5
            min. module 0,5
            centre distance 450 mm
            taper MK 3
            shifting 70 mm
            turning speeds 70 - 320 U/min
            total power requirement 11 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 3,1 x 3,0 x 2,0 m
            Description :
            Machine suitable for the production of
            Straight spur gears, helical gears, worm gears.
            Equipment:
            Complete set of change gears, manuals.

          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal KOEPFER 135


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1822 · Gear Hobbing Machine - Horizontal

          KOEPFER - 135 - - -

          Technical details
          max. wheel diameter 70 mm︱gear width 80 mm︱max. module 1,25 ︱min. module 0,3 ︱turning speeds 222 - 1410 U/min︱min. number of teeth 3 ︱total power requirement 1,1 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 0,9 x 0,6 x 1,5 m︱
            max. wheel diameter 70 mm
            gear width 80 mm
            max. module 1,25
            min. module 0,3
            turning speeds 222 - 1410 U/min
            min. number of teeth 3
            total power requirement 1,1 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 0,9 x 0,6 x 1,5 m
            Description :

          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Horizontal MIKRON A 22.2 P


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E21103 · Gear Hobbing Machine - Horizontal

          MIKRON - A 22.2 P - - -

          Technical details
          max. wheel diameter 20 mm︱gear width 20 mm︱max. module 0,75 ︱min. module 0,1 ︱number of teeth 6 - 399 ︱spindle turning speed range 725 - 7200 U/min︱swivelable +/- 5 °︱total power requirement kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. m︱
          Fully automatic hobbing machine with electro-hydraulic control.
            max. wheel diameter 20 mm
            gear width 20 mm
            max. module 0,75
            min. module 0,1
            number of teeth 6 - 399
            spindle turning speed range 725 - 7200 U/min
            swivelable +/- 5 °
            weight of the machine ca. 0,8 t
            Description :
            Fully automatic hobbing machine with electro-hydraulic control.
          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used  Gear Hobbing Machine - Vertical HURTH-MODUL WF 160


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22027 · Gear Hobbing Machine - Vertical

          HURTH-MODUL - WF 160 - - 2000 - Siemens 840 C

          Technical details
          max. wheel diameter 160 mm︱gear width 400 mm︱max. module 4,5 ︱min. module 0,5 ︱Control Siemens 840 C ︱table diameter 170 mm︱clamping length max. 550 mm︱radial slide travel 140 mm︱cutter diameter max. 130 mm︱cutter length max. 300 mm︱tangential adjustment 240 mm︱pivoting angle +/- 45 Grad︱milling arbors HSK A80 ︱milling spindle speeds (infinitely variable) 225 - 1800 U/min︱total power requirement 34 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 3,2 x 2,6 x 2,8 m︱
          Machine equipped with motor milling head, very good condition!
            max. wheel diameter 160 mm
            gear width 400 mm
            max. module 4,5
            min. module 0,5
            Control Siemens 840 C
            table diameter 170 mm
            clamping length max. 550 mm
            radial slide travel 140 mm
            cutter diameter max. 130 mm
            cutter length max. 300 mm
            tangential adjustment 240 mm
            pivoting angle +/- 45 Grad
            milling arbors HSK A80
            milling spindle speeds (infinite. 225 - 1800 U/min
            total power requirement 34 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 3,2 x 2,6 x 2,8 m
            Description :
            Machine equipped with motor milling head, very good condition!
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical HURTH-MODUL WF 150


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22026 · Gear Hobbing Machine - Vertical

          HURTH-MODUL - WF 150 - - 1997 - Siemens 840 C

          Technical details
          max. wheel diameter 150 mm︱gear width 400 mm︱max. module 4 ︱min. module 0,5 ︱Control Siemens 840 C ︱radial adjustment 160 mm︱tangential adjustment 240 mm︱axial adjustment 540 mm︱milling cutter diameter 130 mm︱cutter length max. 300 mm︱ 170 ︱milling spindle speeds (infinitely variable) 150 - 2000 U/min︱total power requirement 33 kW︱weight of the machine ca. 9,0 t︱dimensions of the machine ca. 2,9 x 2,2 x 2,8 m︱
          Machine equipped with motor milling head, very good condition!
            max. wheel diameter 150 mm
            gear width 400 mm
            max. module 4
            min. module 0,5
            Control Siemens 840 C
            radial adjustment 160 mm
            tangential adjustment 240 mm
            axial adjustment 540 mm
            milling cutter diameter 130 mm
            cutter length max. 300 mm
            170
            milling spindle speeds (infinite. 150 - 2000 U/min
            total power requirement 33 kW
            weight of the machine ca. 9,0 t
            dimensions of the machine ca. 2,9 x 2,2 x 2,8 m
            Description :
            Machine equipped with motor milling head, very good condition!
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical PFAUTER P 251


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2065 · Gear Hobbing Machine - Vertical

          PFAUTER - P 251 - - 1973 -

          Technical details
          max. wheel diameter 250 mm︱gear width 245 mm︱max. module 6 ︱min. module 0,8 ︱table diameter 250 mm︱table hole 63 mm︱tool taper MK 4 ︱turning speeds 80 - 500 U/min︱total power requirement 17,5 kW︱weight of the machine ca. 3,6 t︱dimensions of the machine ca. 3,6 x 2,2 x 2,6 m︱
          Machine suitable for the production of Straight spur gears, helical gears, worm gears. Equipment: Complete set of change gears, milling arbors, clamping material, manuals. Crowning unit. 2-cut cycle.
            max. wheel diameter 250 mm
            gear width 245 mm
            max. module 6
            min. module 0,8
            table diameter 250 mm
            table hole 63 mm
            tool taper MK 4
            turning speeds 80 - 500 U/min
            total power requirement 17,5 kW
            weight of the machine ca. 3,6 t
            dimensions of the machine ca. 3,6 x 2,2 x 2,6 m
            Description :
            Machine suitable for the production of
            Straight spur gears, helical gears, worm gears.
            Equipment:
            Complete set of change gears, milling arbors, clamping material, manuals.
            Crowning unit.
            2-cut cycle.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical PFAUTER P 400


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22003 · Gear Hobbing Machine - Vertical

          PFAUTER - P 400 - - -

          Technical details
          max. wheel diameter 400 mm︱gear width 300 mm︱max. module 6 ︱min. module 0,5 ︱table diameter 400 mm︱cutter diameter max. 160 mm︱milling arbors MK 4 ︱shifting 100 mm︱milling spindle speeds (infinitely variable) 80 - 500 U/min︱table hole 80 mm︱total power requirement 17 kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 2,8 x 1,8 x 2,2 m︱
          Machine suitable for the production of Straight spur gears, helical gears, worm gears. Equipment: Complete set of change gears, milling arbors, clamping material, manuals.
            max. wheel diameter 400 mm
            gear width 300 mm
            max. module 6
            min. module 0,5
            table diameter 400 mm
            cutter diameter max. 160 mm
            milling arbors MK 4
            shifting 100 mm
            milling spindle speeds (infinite. 80 - 500 U/min
            table hole 80 mm
            total power requirement 17 kW
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 2,8 x 1,8 x 2,2 m
            Description :
            Machine suitable for the production of
            Straight spur gears, helical gears, worm gears.
            Equipment:
            Complete set of change gears, milling arbors, clamping material, manuals.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical PFAUTER P 630


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22014 · Gear Hobbing Machine - Vertical

          PFAUTER - P 630 - - -

          Technical details
          max. wheel diameter 630 mm︱gear width 410 mm︱max. module 8 ︱min. module 0,5 ︱table diameter 550 mm︱table hole 100 mm︱tool taper MK 5 ︱turning speeds 62 - 390 U/min︱total power requirement 17 kW︱weight of the machine ca. 6,7 t︱dimensions of the machine ca. 4,0 x 2,1 x 2,1 m︱
          Machine suitable for the production of Straight spur gears, helical gears, worm gears. Equipment: Complete set of change gears, milling arbors, clamping material, manuals.
            max. wheel diameter 630 mm
            gear width 410 mm
            max. module 8
            min. module 0,5
            table diameter 550 mm
            table hole 100 mm
            tool taper MK 5
            turning speeds 62 - 390 U/min
            total power requirement 17 kW
            weight of the machine ca. 6,7 t
            dimensions of the machine ca. 4,0 x 2,1 x 2,1 m
            Description :
            Machine suitable for the production of
            Straight spur gears, helical gears, worm gears.
            Equipment:
            Complete set of change gears, milling arbors, clamping material, manuals.

          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical PFAUTER P 400


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E22015 · Gear Hobbing Machine - Vertical

          PFAUTER - P 400 - - -

          Technical details
          max. wheel diameter 400 mm︱gear width 300 mm︱max. module 6 ︱min. module 0,5 ︱table diameter 400 mm︱cutter diameter max. 160 mm︱milling arbors MK 4 ︱shifting 100 mm︱milling spindle speeds (infinitely variable) 80 - 500 U/min︱table hole 80 mm︱total power requirement 17 kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 2,8 x 1,8 x 2,2 m︱
          Machine suitable for the production of Straight spur gears, helical gears, worm gears. Equipment: Change gears, milling arbors, clamping material, manuals.
            max. wheel diameter 400 mm
            gear width 300 mm
            max. module 6
            min. module 0,5
            table diameter 400 mm
            cutter diameter max. 160 mm
            milling arbors MK 4
            shifting 100 mm
            milling spindle speeds (infinite. 80 - 500 U/min
            table hole 80 mm
            total power requirement 17 kW
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 2,8 x 1,8 x 2,2 m
            Description :
            Machine suitable for the production of
            Straight spur gears, helical gears, worm gears.
            Equipment:
            Change gears, milling arbors, clamping material, manuals.
          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical PFAUTER P 630


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E2063 · Gear Hobbing Machine - Vertical

          PFAUTER - P 630 - - -

          Technical details
          max. wheel diameter 630 mm︱gear width 410 mm︱max. module 8 ︱min. module 0,5 ︱table diameter 550 mm︱table hole 100 mm︱tool taper MK 5 ︱turning speeds 62 - 390 U/min︱total power requirement 17 kW︱weight of the machine ca. 6,7 t︱dimensions of the machine ca. 4,0 x 2,1 x 2,1 m︱
          Machine suitable for the production of Straight spur gears, helical gears, worm gears. Equipment: Complete set of change gears, milling arbors, clamping material, manuals.
            max. wheel diameter 630 mm
            gear width 410 mm
            max. module 8
            min. module 0,5
            table diameter 550 mm
            table hole 100 mm
            tool taper MK 5
            turning speeds 62 - 390 U/min
            total power requirement 17 kW
            weight of the machine ca. 6,7 t
            dimensions of the machine ca. 4,0 x 2,1 x 2,1 m
            Description :
            Machine suitable for the production of
            Straight spur gears, helical gears, worm gears.
            Equipment:
            Complete set of change gears, milling arbors, clamping material, manuals.

          Datasheet
          Request / Contact
          used  Gear Hobbing Machine - Vertical PFAUTER P 160 V


          • Emuk Maschinenhandel GmbH
          • Siemensstrasse 24
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 943161
          • info@emuk.info
            www.emuk.info
          #2070-E1916 · Gear Hobbing Machine - Vertical

          PFAUTER - P 160 V - - -

          Technical details
          max. wheel diameter 160 mm︱gear width 180 mm︱max. module 2,5 ︱min. module 0,5 ︱table diameter 150 mm︱cutter diameter max. 90 mm︱milling arbors MK 3 ︱shifting 78 mm︱milling spindle speeds (infinitely variable) 160 - 500 U/min︱table hole 52 mm︱total power requirement 13 kW︱weight of the machine ca. 2,4 t︱dimensions of the machine ca. 2,2 x 1,9 x 1,9 m︱
          Machine suitable for the production of Straight spur gears, helical gears, worm gears. Equipment: Complete set of change gears, milling arbors, clamping material, manuals.
            max. wheel diameter 160 mm
            gear width 180 mm
            max. module 2,5
            min. module 0,5
            table diameter 150 mm
            cutter diameter max. 90 mm
            milling arbors MK 3
            shifting 78 mm
            milling spindle speeds (infinite. 160 - 500 U/min
            table hole 52 mm
            total power requirement 13 kW
            weight of the machine ca. 2,4 t
            dimensions of the machine ca. 2,2 x 1,9 x 1,9 m
            Description :
            Machine suitable for the production of
            Straight spur gears, helical gears, worm gears.
            Equipment:
            Complete set of change gears, milling arbors, clamping material, manuals.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

          Emuk Maschinenhandel GmbH   76316 - Malsch Siemensstrasse 24 Deutschland
          Emuk Maschinenhandel GmbH

          Siemensstrasse 24



          Contact Trader


            Emuk Maschinenhandel GmbH
           Siemensstrasse 24
            76316 - Malsch
            Deutschland
            +49 (0) 7246 943161
           
            info@emuk.info
            www.emuk.info
            Contact person:

           




          Machine category


          Absauganlage · Absaugung · Aufspanntisch · Bandsäge - Automatisch · Bandsäge - Vertikal · Bügelsäge - Automatisch · CNC Drehmaschine · Doppelschleifbock · Drehmaschine-konventionell-elektronisch · Elektro - Hubwagen · Elektronik / SPS-Steuerungen · Erodiermaschine · Filteranlage · Flachschleifmaschine - Horizontal · Fräser · Fräsmaschine - Universal · Frässtichel-Schleifmaschine · Gewinde-Schnecken-Schleifmaschine · Kantenschleifmaschine · Kegelradhobelmaschine · Koordinatenschleifmaschine · Kreissägenschärfmaschine · Kühlmittelanlage · Langgewinde- und Abwälzfräsmaschine · Leit- und Zugspindeldrehmaschine · Magnetbandförderer · Messerschleifmaschine · Messmaschine · Nutenziehmaschine · Rundlaufprüfgerät · Rundschleifmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtischflachschleifmaschine - Vertikal · Rundtischflächenschleifmaschine - Horiz. · Schabrad-Schärfmaschine · Schleifscheibe · Schleifscheibenprofiliergerät · Schneidradschärfmaschine · Schnellradiale - Bohrmaschine · Schärfmaschine · Ständerbohrmaschine · Sägeblattschärfmaschine · Tieflochbohrmaschine · Topfschleifmaschine · Waschanlage - Manuell · Werkstattpressen - hydraulisch · Werkzeug Voreinstellgerät · Werkzeughalter · Werkzeugschleifmaschine · Werkzeugschleifmaschine - Universal · Wälzfräserschärfmaschine · Zahnrad-Abwälzfräsmaschine - horizontal · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zahnstangenstossmaschine · Zentrumschleifmaschine · Ölkühlgerät ·