European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          MWB GmbH & CO. KG - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe TRAUB TNS 30-42D


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7736 · CNC Lathe

          TRAUB - TNS 30-42D - - 1988 - Traub System TX-8-D

          Technical details
          turning diameter 42 mm︱turning length 150 mm︱control Traub System TX-8-D ︱Switch-on hours 7135 h ︱Turret 3x ︱total power requirement 34 kW︱
          Retrofit 2007 - since then only about 7000 hours! with tool holder, clamping cartridges, driven tools
            turning diameter 42 mm
            turning length 150 mm
            control Traub System TX-8-D
            Switch-on hours 7135 h
            Turret 3x
            total power requirement 34 kW
            Description :
            Retrofit 2007 - since then only about 7000 hours!
            with tool holder, clamping cartridges, driven tools
          Datasheet
          Request / Contact

          CNC Lathe - Inclined Bed Type

          used  CNC Lathe - Inclined Bed Type HWACHEON Hi-ECO21


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7757 · CNC Lathe - Inclined Bed Type

          HWACHEON - Hi-ECO21 - - 1991 - FANUC SERIES 0-T

          Technical details
          turning diameter 320 mm︱turning diameter over bed 520 mm︱turning length 600 mm︱control FANUC SERIES 0-T ︱chucking diameter 200 mm︱spindle nose ASA A2-6 ︱spindle bore 62 mm︱turning speeds 30-4000 U/min︱Turret 12 fach︱x-travel 270 mm︱z-travel 670 mm︱rapid traverse max. 18 m/min︱tail stock ︱total power requirement 11/15 kW︱weight of the machine ca. ca. 5,0 t︱dimensions of the machine ca. 3,02 x 1,96 x 2,00 m︱Chip conveyor
            turning diameter 320 mm
            turning diameter over bed 520 mm
            turning length 600 mm
            control FANUC SERIES 0-T
            chucking diameter 200 mm
            spindle nose ASA A2-6
            spindle bore 62 mm
            turning speeds 30-4000 U/min
            Turret 12 fach
            x-travel 270 mm
            z-travel 670 mm
            rapid traverse max. 18 m/min
            total power requirement 11/15 kW
            weight of the machine ca. ca. 5,0 t
            dimensions of the machine ca. 3,02 x 1,96 x 2,00 m
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center SCHIESS VMG4 MA90


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7762 · CNC Turning- and Milling Center

          SCHIESS - VMG4 MA90 - - 2009 - SCHIESS SMTCL

          Technical details
          turning diameter 5000 mm︱turning length 3000 mm︱control SCHIESS SMTCL ︱workpiece weight 50 t︱faceplate diameter 4000 mm︱turning speeds 0 - 120 U/min︱torque 100 kNm︱horizontal travel of side carriages 4800 mm︱feed 0 - 16000 mm/min︱Rapide traverse 0 - 16000 mm/min︱total power requirement 110 kW︱
            turning diameter 5000 mm
            turning length 3000 mm
            control SCHIESS SMTCL
            workpiece weight 50 t
            faceplate diameter 4000 mm
            turning speeds 0 - 120 U/min
            torque 100 kNm
            horizontal travel of side carria. 4800 mm
            feed 0 - 16000 mm/min
            Rapide traverse 0 - 16000 mm/min
            total power requirement 110 kW
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe SKODA SR 1000x8000


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7737 · Heavy Duty Lathe

          SKODA - SR 1000x8000 - - -

          Technical details
          turning diameter 1000 mm︱turning length 8000 mm︱steady
            turning diameter 1000 mm
            turning length 8000 mm
          Datasheet
          Request / Contact

          Turret Lathe

          used  Turret Lathe HEWA HR 63


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7791 · Turret Lathe

          HEWA - HR 63 - - 1966 -

          Technical details
          turning diameter over bed 300 mm︱spindle passage 71 mm︱turret (x-stations) 16 ︱pitch circle 275 mm︱turning speeds 17 - 2140 U/min︱motor speeds: 750/1500 U/min ︱weight of the machine ca. 3,30 t︱dimensions of the machine ca. 2,18 x 0,85 m︱
            turning diameter over bed 300 mm
            spindle passage 71 mm
            turret (x-stations) 16
            pitch circle 275 mm
            turning speeds 17 - 2140 U/min
            motor speeds: 750/1500 U/min
            weight of the machine ca. 3,30 t
            dimensions of the machine ca. 2,18 x 0,85 m
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine EMAG VTC 250 DUO DD


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7702 · Vertical Turning Machine

          EMAG - VTC 250 DUO DD - - 2007 -

          Technical details
          tool taper HSK und VDI 40 ︱Cooling device 7-30 bar bar︱tool diameter 120 mm︱tool length - max. 120 mm︱turning speeds 3000 U/min︱Chip conveyor
          Bar loader - 2 revolving workpiece feed and removal Tool shots: HSK and VDI 40 Workpiece gripper on all 3 turrets Left: 6-fold end turret Then: NC vice Center: 12-disc disc turret Then: NC steady rest, self-centering, tailstock below, Hydraulic double piston clamping cylinder above Right: 12-disc disc turret for driven tools chip conveyor Knoll plant 1500l Coolant supply 7-30 bar
            tool taper HSK und VDI 40
            Cooling device 7-30 bar bar
            tool diameter 120 mm
            tool length - max. 120 mm
            turning speeds 3000 U/min
            Description :
            Bar loader - 2 revolving workpiece feed and removal
            Tool shots: HSK and VDI 40
            Workpiece gripper on all 3 turrets
            Left: 6-fold end turret
            Then: NC vice
            Center: 12-disc disc turret
            Then: NC steady rest, self-centering, tailstock below,
            Hydraulic double piston clamping cylinder above
            Right: 12-disc disc turret for driven tools
            chip conveyor
            Knoll plant 1500l
            Coolant supply 7-30 bar
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VTC 250 DUO ED


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7701 · Vertical Turning Machine

          EMAG - VTC 250 DUO ED - - 2005 - Siemens 840 D

          Technical details
          Control Siemens 840 D ︱tool diameter 120 mm︱tool length - max. 120 mm︱turning speeds 3000 U/min︱
          Bar loader - 2 revolving workpiece feed and removal Tool shots: HSK and VDI 40 Workpiece gripper on all 3 turrets Left: 6-fold end turret Then: NC vice Center: 12-disc disc turret Then: NC steady rest, self-centering, tailstock below, Hydraulic double piston clamping cylinder above Right: 12-disc disc turret for driven tools chip conveyor Coolant system KNOLL 1500l Coolant supply 7-30 bar
            Control Siemens 840 D
            tool diameter 120 mm
            tool length - max. 120 mm
            turning speeds 3000 U/min
            Description :
            Bar loader - 2 revolving workpiece feed and removal
            Tool shots: HSK and VDI 40
            Workpiece gripper on all 3 turrets
            Left: 6-fold end turret
            Then: NC vice
            Center: 12-disc disc turret
            Then: NC steady rest, self-centering, tailstock below,
            Hydraulic double piston clamping cylinder above
            Right: 12-disc disc turret for driven tools
            chip conveyor
            Coolant system KNOLL 1500l
            Coolant supply 7-30 bar
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column SCHIESS VMG 4-PWS


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7735 · Vertical Turret Lathe - Double Column

          SCHIESS - VMG 4-PWS - - 2002 - SINUMERIK 840D

          Technical details
          Control SINUMERIK 840D ︱speeds max. 3150 U/min︱tool taper SK 50 ︱total power requirement 160 kW︱
          Vertical lathe with driven tools, linear axis and pallet changing syste Max. Turning and circulation diameter - 3200 mm Portal passage width - 3000 mm Max. Machining / workpiece height (turning) - 2350 mm Max. Machining / workpiece height (milling) - 2310 mm Max. Workpiece weight - 25000 kg Diameter of the machine clamping station (pallet) - 3000 mm Nutenbild - star-shaped / Cartesian Groove width - 36 H12 mm Number of integrated cocking slides - 4 pieces Stepless speed - for turning 0,50 - 180 rpm Stepless speed - for milling 0.0004 - 4 rpm Max. Torque on the faceplate - 75 kNm Main drive power - 110 kW Horizontal adjustment of the support - 1900 mm Horizontal adjustment of the support - 2800 mm Horizontal guide length of the support - 1000 mm Prism height of the support guide - 1000 mm Vertical adjustment of the chisel pusher - 1400 mm Guide length of the chisel slide - 1200 mm Cross section of the chisel slid - 280 x 240 mm Max. permissible cutting force for turning - 50 kN smallest immersion diameter - 375 mm Drilling and milling device Power 1.4-52 kW Spindle speeds level 1 5-180-520 rpm Stage 2 30-1100-3150 rpm Torque at the spindle Stage 1 2400-2400-850 Nm Torque at spindle stage 2 450-450-160 Nm Infeed / Feedrate X / Z Axis - 0.1-16000 mm / min Crossbar adjustment vertically stepless - 1900 mm Crossbeam adjustment speed - 4000 mm / min Portal adjustment Y-axis - 1600 mm Adjustment speed of the portal 0.1 - 8000 mm / min electrical equipment Operating voltage - 400 V Frequency - 50 Hz Height of the working area protection over the corridor - 2500 mm Number of integrated chip conveyor 3 pieces Coolant device (connection to central bulk container) internal coolant supply Pump capacity - 15 l / min Pressure - 20 bar external coolant supply Pump capacity 40 l / min Pressure 2 bar hardware components Flat Panel Panel 0F'31 Width 19 " TFT color Fiachbildschirm 19 "machine control panel machine-specific keyboard Modules in the control cabinet digital converter system SIMODRIVE 611 NCU module with CNC, PLC and communication tasks SIMATIC S7 peripheral modules serial interface RS 232 C Max. Spindle torque 2400 Nm Tool changer - 27x electronic handwheel
            Control SINUMERIK 840D
            speeds max. 3150 U/min
            tool taper SK 50
            total power requirement 160 kW
            Description :
            Vertical lathe with driven tools, linear axis and pallet changing syste


            Max. Turning and circulation diameter - 3200 mm
            Portal passage width - 3000 mm
            Max. Machining / workpiece height (turning) - 2350 mm
            Max. Machining / workpiece height (milling) - 2310 mm
            Max. Workpiece weight - 25000 kg
            Diameter of the machine clamping station (pallet) - 3000 mm
            Nutenbild - star-shaped / Cartesian
            Groove width - 36 H12 mm
            Number of integrated cocking slides - 4 pieces
            Stepless speed - for turning 0,50 - 180 rpm
            Stepless speed - for milling 0.0004 - 4 rpm
            Max. Torque on the faceplate - 75 kNm
            Main drive power - 110 kW
            Horizontal adjustment of the support - 1900 mm
            Horizontal adjustment of the support - 2800 mm
            Horizontal guide length of the support - 1000 mm
            Prism height of the support guide - 1000 mm
            Vertical adjustment of the chisel pusher - 1400 mm
            Guide length of the chisel slide - 1200 mm
            Cross section of the chisel slid - 280 x 240 mm
            Max. permissible cutting force for turning - 50 kN
            smallest immersion diameter - 375 mm

            Drilling and milling device
            Power 1.4-52 kW
            Spindle speeds level 1 5-180-520 rpm
            Stage 2 30-1100-3150 rpm
            Torque at the spindle Stage 1 2400-2400-850 Nm
            Torque at spindle stage 2 450-450-160 Nm
            Infeed / Feedrate X / Z Axis - 0.1-16000 mm / min
            Crossbar adjustment vertically stepless - 1900 mm
            Crossbeam adjustment speed - 4000 mm / min
            Portal adjustment Y-axis - 1600 mm
            Adjustment speed of the portal 0.1 - 8000 mm / min

            electrical equipment

            Operating voltage - 400 V
            Frequency - 50 Hz

            Height of the working area protection over the corridor - 2500 mm
            Number of integrated chip conveyor 3 pieces

            Coolant device (connection to central bulk container)
            internal coolant supply

            Pump capacity - 15 l / min
            Pressure - 20 bar
            external coolant supply
            Pump capacity 40 l / min
            Pressure 2 bar

            hardware components

            Flat Panel Panel 0F'31 Width 19 "
            TFT color Fiachbildschirm
            19 "machine control panel
            machine-specific keyboard

            Modules in the control cabinet
            digital converter system SIMODRIVE 611
            NCU module with CNC, PLC and communication tasks
            SIMATIC S7 peripheral modules

            serial interface RS 232 C
            Max. Spindle torque 2400 Nm
            Tool changer - 27x
            electronic handwheel
          Datasheet
          Request / Contact

          Jig Boring Machine - Double Column

          used  Jig Boring Machine - Double Column SIP HYDROPTIC 7


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7812 · Jig Boring Machine - Double Column

          SIP - HYDROPTIC 7 - - unbekannt -

          Technical details
          spindle diameter 135 mm︱Table dimensions 1570 x 1024 mm︱passage 365-1265 mm︱table travel 1400 mm︱bore head adjustment (Z) max. 1000 mm︱max. travel between columns 1600 mm︱weight of the machine ca. 15,60 t︱dimensions of the machine ca. 5,00 x 3,00 x 3,60 m︱
            spindle diameter 135 mm
            Table dimensions 1570 x 1024 mm
            passage 365-1265 mm
            table travel 1400 mm
            bore head adjustment (Z) max. 1000 mm
            max. travel between columns 1600 mm
            weight of the machine ca. 15,60 t
            dimensions of the machine ca. 5,00 x 3,00 x 3,60 m
          Datasheet
          Request / Contact
          used  Jig Boring Machine - Double Column SIP MP - 3K


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7805 · Jig Boring Machine - Double Column

          SIP - MP - 3K - - unbekannt -

          Technical details
          table surface area 520 x 380 mm︱travel -x axis 400 mm︱travel -y axis 500 mm︱height adjustment 380 mm︱max. dist. table - spindle nose 510 mm︱tool taper MK 2 ︱spindle stroke 170 mm︱turning speeds 75 - 2000 U/min︱feed 0,02 - 0,18 mm/U︱total power requirement 0,74 kW︱weight of the machine ca. 2,00 t︱dimensions of the machine ca. 1,6 x 1,7 x 1,9 m︱
          Equipment / scope of delivery: MK 2 - holder with tightening thread 6 drilling feeds electric height adjustment
            table surface area 520 x 380 mm
            travel -x axis 400 mm
            travel -y axis 500 mm
            height adjustment 380 mm
            max. dist. table - spindle nose 510 mm
            tool taper MK 2
            spindle stroke 170 mm
            turning speeds 75 - 2000 U/min
            feed 0,02 - 0,18 mm/U
            total power requirement 0,74 kW
            weight of the machine ca. 2,00 t
            dimensions of the machine ca. 1,6 x 1,7 x 1,9 m
            Description :
            Equipment / scope of delivery:
            MK 2 - holder with tightening thread
            6 drilling feeds
            electric height adjustment
          Datasheet
          Request / Contact
          used  Jig Boring Machine - Double Column KOLB KBNG 120


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7807 · Jig Boring Machine - Double Column

          KOLB - KBNG 120 - - 1984 - Heidenhain TNC 426

          Technical details
          Control Heidenhain TNC 426 ︱table-size 2.200 x 3.240 mm︱table load 14 t︱distance spindle /table 100 – 1.300 mm︱distance between columns 2.750 mm︱table longitudinal travel 3000 mm︱slide adjustment - vertical 2180 mm︱feed movement 500 mm︱Rapide traverse 10000 mm/min︱spindle taper ISO 50 ︱spindle turning speed range 14 – 1.400 U/min︱transmission ratio 2 ︱torque 2.50 kNm︱boring spindle diameter 224 mm︱spindle bearing diameter 120 mm︱diameter of hob max. 250 mm︱milling depth max. 5 mm︱feed capacity Z - max. 50000 N︱feed 1 - 2000 mm/min︱total power requirement 46 kW︱
          independent CNC deep hole drilling unit Heidenhain TNC 426 (modification 2006) Deep hole drilling spindle BTA / ELB High pressure system for oil through the spindle Complete deep drilling oil collection and filtration system Large package of tool holders with adapter for internal cooling Large package of holders, boring bars and accessories for deep hole drilling
            Control Heidenhain TNC 426
            table-size 2.200 x 3.240 mm
            table load 14 t
            distance spindle /table 100 – 1.300 mm
            distance between columns 2.750 mm
            table longitudinal travel 3000 mm
            slide adjustment - vertical 2180 mm
            feed movement 500 mm
            Rapide traverse 10000 mm/min
            spindle taper ISO 50
            spindle turning speed range 14 – 1.400 U/min
            transmission ratio 2
            torque 2.50 kNm
            boring spindle diameter 224 mm
            spindle bearing diameter 120 mm
            diameter of hob max. 250 mm
            milling depth max. 5 mm
            feed capacity Z - max. 50000 N
            feed 1 - 2000 mm/min
            total power requirement 46 kW
            Description :
            independent CNC deep hole drilling unit
            Heidenhain TNC 426 (modification 2006)
            Deep hole drilling spindle BTA / ELB
            High pressure system for oil through the spindle
            Complete deep drilling oil collection and filtration system
            Large package of tool holders with adapter for internal cooling
            Large package of holders, boring bars and accessories for deep hole drilling
          Datasheet
          Request / Contact

          Jig Boring Machine - Horizontal

          used  Jig Boring Machine - Horizontal DIXI 75 ON


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7823 · Jig Boring Machine - Horizontal

          DIXI - 75 ON - - -

          Technical details
          spindle diameter 75 mm︱table-size 1000 x 810 mm︱table load 1,20 t︱spindle turning speed range 32 - 1600 U/min︱
            spindle diameter 75 mm
            table-size 1000 x 810 mm
            table load 1,20 t
            spindle turning speed range 32 - 1600 U/min
          Datasheet
          Request / Contact

          Jig Boring Machine - Vertical

          used  Jig Boring Machine - Vertical SIP MP 5G


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7806 · Jig Boring Machine - Vertical

          SIP - MP 5G - - unbekannt -

          Technical details
          table-size 1100 x 810 mm︱spindle turning speed range 50 – 2000 U/min︱spindle taper MK 4 ︱x-axis 1000 mm︱y-axis 715 mm︱z-axis 600 mm︱total power requirement 2,2 kW︱weight of the machine ca. 4,10 t︱
          Heidenhain 2-axis digital display, Round table Ø 600 mm, Round swivel table Ø 450 mm, automatic feeds in all directions, 3 milling angles, extremely many accessories
            table-size 1100 x 810 mm
            spindle turning speed range 50 – 2000 U/min
            spindle taper MK 4
            x-axis 1000 mm
            y-axis 715 mm
            z-axis 600 mm
            total power requirement 2,2 kW
            weight of the machine ca. 4,10 t
            Description :
            Heidenhain 2-axis digital display,
            Round table Ø 600 mm,
            Round swivel table Ø 450 mm,
            automatic feeds in all directions,
            3 milling angles,
            extremely many accessories
          Datasheet
          Request / Contact
          used  Jig Boring Machine - Vertical SIP / HAUSER MP 52


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7809 · Jig Boring Machine - Vertical

          SIP / HAUSER - MP 52 - - 1981 - HEIDENHAIN

          Technical details
          x-travel 900 mm︱y-travel 600 mm︱z-travel 635 mm︱Control HEIDENHAIN ︱weight of the machine ca. ca. 6,50 t︱dimensions of the machine ca. ca. 2,93 x 2,37 x 2,69 m︱
            x-travel 900 mm
            y-travel 600 mm
            z-travel 635 mm
            Control HEIDENHAIN
            weight of the machine ca. ca. 6,50 t
            dimensions of the machine ca. ca. 2,93 x 2,37 x 2,69 m
          Datasheet
          Request / Contact
          used  Jig Boring Machine - Vertical SIP Hydroptik 6 A


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7808 · Jig Boring Machine - Vertical

          SIP - Hydroptik 6 A - - 1980 -

          Technical details
          table-size 1100 x 850 mm︱x-travel 1000 mm︱y-travel 700 mm︱z-travel 800 mm︱bore stroke 300 mm︱distance spindle /table 1000 mm︱distance between columns 1100 mm︱spindle turning speed range 40 - 2000 U/min︱feed 25 - 500 mm/min︱feed - spindle and radial slide 0,04 - 0,35 mm/U︱total power requirement 12 kW︱weight of the machine ca. 10,50 t︱dimensions of the machine ca. 0,80 x 0,70 x 0,40 m︱
          universal rotating and tilting table SIP PI 5 Diameter - 450 mm Height - 400 mm Load max. 300 kg Dimensions - 800x700x400 mm Lots of accessories Digital display
            table-size 1100 x 850 mm
            x-travel 1000 mm
            y-travel 700 mm
            z-travel 800 mm
            bore stroke 300 mm
            distance spindle /table 1000 mm
            distance between columns 1100 mm
            spindle turning speed range 40 - 2000 U/min
            feed 25 - 500 mm/min
            feed - spindle and radial slide 0,04 - 0,35 mm/U
            total power requirement 12 kW
            weight of the machine ca. 10,50 t
            dimensions of the machine ca. 0,80 x 0,70 x 0,40 m
            Description :
            universal rotating and tilting table SIP PI 5
            Diameter - 450 mm
            Height - 400 mm
            Load max. 300 kg
            Dimensions - 800x700x400 mm
            Lots of accessories
            Digital display
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal UNION PCR 150


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7761 · Machining Center - Universal

          UNION - PCR 150 - - 2008 - Siemens 840 D

          Technical details
          x-travel 13000 mm︱y-travel 4000 mm︱z-travel 1500 mm︱Control Siemens 840 D ︱spindle diameter 150 mm︱travel W - 700 mm︱tool taper ISO 50 ︱torque 2,05 kNm︱turning speeds 5 - 3000 U/min︱feed power 25000 N︱feed 1 - 6000 mm/min︱Rapide traverse 15000 mm/min︱total power requirement 60 kW︱weight of the machine ca. 43,50 t︱dimensions of the machine ca. 10.30 x 6.00 x 5.80 m︱
            x-travel 13000 mm
            y-travel 4000 mm
            z-travel 1500 mm
            Control Siemens 840 D
            spindle diameter 150 mm
            travel W - 700 mm
            tool taper ISO 50
            torque 2,05 kNm
            turning speeds 5 - 3000 U/min
            feed power 25000 N
            feed 1 - 6000 mm/min
            Rapide traverse 15000 mm/min
            total power requirement 60 kW
            weight of the machine ca. 43,50 t
            dimensions of the machine ca. 10.30 x 6.00 x 5.80 m
          Datasheet
          Request / Contact
          used  Machining Center - Universal SCHIESS HM-3-20


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7733 · Machining Center - Universal

          SCHIESS - HM-3-20 - - 2002 - Siemens 840 D

          Technical details
          4000 mm︱Y-axis headstock 3800 mm︱ 1250 mm︱ +/-190° ︱B-axis 0-360° ︱speeds: ︱x-axis 0-25000 mm/min︱y-axis 0-24000 mm/min︱z-axis 0-25000 mm/min︱c-axis 0-40 1/min︱b-axis 0-4,5 1/min︱Clamping area of pallets Ø 3000 mm︱ 30000 kg︱ 50 kW︱ 70 kW︱ 1700 Nm︱ 2400 Nm︱Speeds of milling spindle 0 - 2000 U/min︱ GB 1 + UB 1
            4000 mm
            Y-axis headstock 3800 mm
            1250 mm
            +/-190°
            B-axis 0-360°
            x-axis 0-25000 mm/min
            y-axis 0-24000 mm/min
            z-axis 0-25000 mm/min
            c-axis 0-40 1/min
            b-axis 0-4,5 1/min
            Clamping area of pallets Ø 3000 mm
            30000 kg
            50 kW
            70 kW
            1700 Nm
            2400 Nm
            Speeds of milling spindle 0 - 2000 U/min
            GB 1 + UB 1
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical MIKRON VCP 1350


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7729 · Machining Center - Vertical

          MIKRON - VCP 1350 - - 2004 - Heidenhain iTNC530

          Technical details
          x-travel 1350 mm︱y-travel 900 mm︱z-travel 750 mm︱Control Heidenhain iTNC530 ︱tool changer 60 x ︱spindle speed: max. 12000 ︱tool taper HSK 63 ︱Control on 65622 h︱Machine on 58129 h︱Program running time 26340 h︱Spindle hour 9280 h︱
            x-travel 1350 mm
            y-travel 900 mm
            z-travel 750 mm
            Control Heidenhain iTNC530
            tool changer 60 x
            spindle speed: max. 12000
            tool taper HSK 63
            Control on 65622 h
            Machine on 58129 h
            Program running time 26340 h
            Spindle hour 9280 h
          Datasheet
          Request / Contact
          used  Machining Center - Vertical DMG DMU 60T


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7744 · Machining Center - Vertical

          DMG - DMU 60T - - - Heidenhain

          Technical details
          Control Heidenhain ︱x-travel 630 mm︱y-travel 560 mm︱z-travel 560 mm︱table-size 1000 x 600 mm︱tool taper SK 40 ︱tool changer 24 x ︱Switch-on hours 37011 h ︱Spindle hour 11575 h︱table load 0,5 t︱turning speeds max. 12000 U/min︱total power requirement 26 kW︱weight of the machine ca. 6,70 t︱dimensions of the machine ca. 7.10 x 4.20 x 2.90 m︱
            Control Heidenhain
            x-travel 630 mm
            y-travel 560 mm
            z-travel 560 mm
            table-size 1000 x 600 mm
            tool taper SK 40
            tool changer 24 x
            Switch-on hours 37011 h
            Spindle hour 11575 h
            table load 0,5 t
            turning speeds max. 12000 U/min
            total power requirement 26 kW
            weight of the machine ca. 6,70 t
            dimensions of the machine ca. 7.10 x 4.20 x 2.90 m
          Datasheet
          Request / Contact

          Milling Machining Centers 4 Axis

          used  Milling Machining Centers 4 Axis OKUMA MC 5-VA


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7818 · Milling Machining Centers 4 Axis

          OKUMA - MC 5-VA - - - Okuma OSP 5000M-G

          Technical details
          x-travel 1050 mm︱y-travel 510 mm︱z-travel 560 mm︱tool changer 20 x ︱control Okuma OSP 5000M-G ︱total power requirement 40 kW︱
            x-travel 1050 mm
            y-travel 510 mm
            z-travel 560 mm
            tool changer 20 x
            control Okuma OSP 5000M-G
            total power requirement 40 kW
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used  Milling Machining Centers 5 Axis HERMLE C 40 U dynamic


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7756 · Milling Machining Centers 5 Axis

          HERMLE - C 40 U dynamic - - 2010 - HEIDENHAIN i TNC

          Technical details
          x-travel 850 mm︱y-travel 700 mm︱z-travel 500 mm︱Control HEIDENHAIN i TNC ︱NC tilt rotary table Ø 420 mm︱spindle taper HSK-A63 ︱tool changer 38 ︱Additional toolmagazin 87 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Heidenhain iTNC 530 Event Messenger Software KinematicOpt - Software (with Measuring Ball) Linear Axis Dynamic Version A- Off-center Axis Position Y = 275 6-fold Turning Angle SRT ø 420 Internal coolant supply 80 bar Paper belt filter standard chip conveyor standard coolant device, Air purge system for scale bed flushing scraper belt conveyor Cleaning blower Manual cabin door Manual cab roof Flexible glass safety glass Electrical hleat compensation iTNC Electrical manual operating module iTNC BLUM tool breakage / measurement A2 Coolant nozzle Oil mist extraction Touch probe M & H25 Special table top 5x Erowa MTS + Special secondary plates each 2x MTS + Blumlaser A3 - Surveying & Breakage Monitoring Pneumatics extension for automation conversion Air blast through the spindle centr Hours 75,000 Spindle hours total 24,000 Spindle cooling unit NEW 08/2019 Ball screw Z-axis NEW 12/2017 (currently approx. 4000h) Spindle head & rotary transmission NEW 12/2017 (currently approx. 4000h) Spindle motor NEW 12/2018 (currently approx. Glass scale Heidenhain Z axis NEW 05/2019 Bellows roof section NEW 07/2019
            x-travel 850 mm
            y-travel 700 mm
            z-travel 500 mm
            Control HEIDENHAIN i TNC
            NC tilt rotary table Ø 420 mm
            spindle taper HSK-A63
            tool changer 38
            Additional toolmagazin 87
            Description :
            Heidenhain iTNC 530
            Event Messenger Software
            KinematicOpt - Software (with Measuring Ball)
            Linear Axis Dynamic Version
            A- Off-center Axis Position Y = 275
            6-fold Turning Angle SRT ø 420
            Internal coolant supply 80 bar
            Paper belt filter
            standard chip conveyor
            standard coolant device,
            Air purge system for scale
            bed flushing
            scraper belt conveyor
            Cleaning blower
            Manual cabin door
            Manual cab roof
            Flexible glass safety glass
            Electrical hleat compensation iTNC
            Electrical manual operating module iTNC
            BLUM tool breakage / measurement A2
            Coolant nozzle
            Oil mist extraction
            Touch probe M & H25
            Special table top 5x Erowa MTS +
            Special secondary plates each 2x MTS +
            Blumlaser A3 - Surveying & Breakage Monitoring
            Pneumatics extension for automation conversion
            Air blast through the spindle centr

            Hours 75,000
            Spindle hours total 24,000

            Spindle cooling unit NEW 08/2019
            Ball screw Z-axis NEW 12/2017 (currently approx. 4000h)
            Spindle head & rotary transmission NEW 12/2017 (currently approx. 4000h)
            Spindle motor NEW 12/2018 (currently approx.
            Glass scale Heidenhain Z axis NEW 05/2019
            Bellows roof section NEW 07/2019
          Datasheet
          Request / Contact
          used  Milling Machining Centers 5 Axis DMG DMU 50 eVolution


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7746 · Milling Machining Centers 5 Axis

          DMG - DMU 50 eVolution - - 2000 - Heidenhain iTNC 430

          Technical details
          x-travel 500 mm︱y-travel 420 mm︱z-travel 380 mm︱Control Heidenhain iTNC 430 ︱turning speeds max. 18000 U/min︱tool taper SK 40 ︱tool changer 32 x ︱viewing window Rotoclear ︱Measuring probe 3D ︱hand wheel ︱Chip conveyor
          Spindle was exchanged in 2016!
            x-travel 500 mm
            y-travel 420 mm
            z-travel 380 mm
            Control Heidenhain iTNC 430
            turning speeds max. 18000 U/min
            tool taper SK 40
            tool changer 32 x
            viewing window Rotoclear
            Measuring probe 3D
            Description :
            Spindle was exchanged in 2016!
          Datasheet
          Request / Contact
          used  Milling Machining Centers 5 Axis DMG DMU 50 eVOLUTION


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7747 · Milling Machining Centers 5 Axis

          DMG - DMU 50 eVOLUTION - - 2000 - Heidenhain - Millplus

          Technical details
          x-travel 500 mm︱y-travel 380 mm︱z-travel 380 mm︱Control Heidenhain - Millplus ︱tool taper SK 40 ︱rapid traverse 30 m/min︱table-size 500 x 380 mm︱Internal cooling ︱weight of the machine ca. 6,00 t︱Chip conveyor
            x-travel 500 mm
            y-travel 380 mm
            z-travel 380 mm
            Control Heidenhain - Millplus
            tool taper SK 40
            rapid traverse 30 m/min
            table-size 500 x 380 mm
            weight of the machine ca. 6,00 t
          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column TOS - KURIM FRF 300 - V / A6


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7710 · Planer-Type Milling M/C - Double Column

          TOS - KURIM - FRF 300 - V / A6 - - 2009 - SIEMENS 840 D

          Technical details
          x-travel 5000 mm︱y-travel 3800 mm︱z-travel 1280 mm︱Control SIEMENS 840 D ︱table surface area 3000 x 6000 mm︱table load 4000 kg/m2 ︱turning speeds 20 - 4000 U/min︱tool taper SK 50 ︱max. torque on the spindle max. 1000 N ︱feed 30 m/min︱distance between columns 3550 mm︱Passage under the portal 2050 mm︱Spindle rotation B 210 ° ︱Spindle rotation C 360 ° ︱C-axis rotation speed 1 - 1800°/min ︱Spindle head VK ︱Spindle head VP2 ︱total power requirement 37 kW︱
            x-travel 5000 mm
            y-travel 3800 mm
            z-travel 1280 mm
            Control SIEMENS 840 D
            table surface area 3000 x 6000 mm
            table load 4000 kg/m2
            turning speeds 20 - 4000 U/min
            tool taper SK 50
            max. torque on the spindle max. 1000 N
            feed 30 m/min
            distance between columns 3550 mm
            Passage under the portal 2050 mm
            Spindle rotation B 210 °
            Spindle rotation C 360 °
            C-axis rotation speed 1 - 1800°/min
            total power requirement 37 kW
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          MWB GmbH  &  Co. KG   09326 Geringswalde Rochlitzer Strasse 6 b Deutschland
          MWB GmbH & Co. KG

          Rochlitzer Strasse 6 b



          Contact Trader


            MWB GmbH & Co. KG
           Rochlitzer Strasse 6 b
            09326 Geringswalde
            Deutschland
            +49 37382 8739
           
            info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
            Contact person:

           




          Machine category


          3D Universal Messmaschine · Absauganlage · Abwälzfräs- und Stoßmaschine -kombiniert · Bearbeitungszentrum 4 Achs · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Blechbiegemaschine - 4 Walzen · Bohr- und Fräszentrum · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Fahrständerfräsmaschine · Fräsmaschine - Universal · Karusselldrehmaschine - Doppelständer · Koordinatenbohrwerk - Zweiständer · Lehrenbohrwerk - Horizontal · Lehrenbohrwerk - Vertikal · Lichtbogen-Erosionsgerät · Portalfräsmaschine · Revolverdrehmaschine · Schweißmaschine - Längsnaht · Schweißmaschine Längsnaht u. Rundnaht · Schwerdrehmaschine · Vertikaldrehmaschine · Werkzeug Voreinstellgerät · Zahnrad-Abwälzfräsmaschine - vertikal ·