European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Broziat GmbH Maschinen + Service - Stockist for used machines

          Machinelist:


          Hydr. pressbrake

          used  Hydr. pressbrake DURMAZLAR GBP-S 2050-60


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100293 · Hydr. pressbrake

          DURMAZLAR - GBP-S 2050-60 - - 2016 -

          Technical details
          Power max. 600 kN︱Working width max. 2050 mm︱Width betw. Frames 1700 mm︱Throat C-Frame 410 mm︱Stroke maximum 365 mm︱Working speed 10 mm/s︱Electric Power 7,5 kW︱Way back gauge X 650 mm︱Back strokes speed 110 mm/s︱max. backgauge R 250 mm︱working hours total 3367 Std.︱number of strokes 286334 Stk.︱oil capacity 100 l︱
          The machine is in good condition. • 3D CNC-Control Cybelec Modeva 15T with touchscreen • CNC-controlled Y1-, Y2-, X-, R-axis and motorized table crowning • two linear, digital scales at the top beam for the precise positioning bending position • back-gauge with four fingers, easily shifted in longitudal axis on linear rails by hand • X-axis on linear guides, driven by ball-screws • R-axis on linear guides, driven by ball-screws • German Safety-Laser Fiessler AKAS II including PLC-safety controller • motorized table crowning for the compensation of the table- and top-beam-deflection • control panel on the right side of machine • massive, low-maintenance quadruple guide system of the top beam • manual quick release top-tool-clamping, Promecam/Amada • foot-pedal on mobile console with emergency-stop button • four pieces of quickset front sheet-support-arms on linear rails • double overload protection against slant-position of top beam • monitoring of the relative position between the cylinders during pressing • high quality linear scales with a resolution of 0,01mm • direct programming of the angle • programmable bending and return speed of top beam • manual, semi-automatic and automatic mode • CNC calculated pressing-force • hydraulic block with German components (Rexroth) • hydraulic system with overload protection • cylinders manufactured out of one block • big hydraulic tank to keep the oil-temperature on a constant level • users-manual (PL) with declaration of CE-conformity +CNC-Controller DELEM DA 66T +CNC-controlled Z1/Z2-axis +CNC-controlled Delta X-axis +/- 125 mm
            Power max. 600 kN
            Working width max. 2050 mm
            Width betw. Frames 1700 mm
            Throat C-Frame 410 mm
            Stroke maximum 365 mm
            Working speed 10 mm/s
            Electric Power 7,5 kW
            Way back gauge X 650 mm
            Back strokes speed 110 mm/s
            max. backgauge R 250 mm
            working hours total 3367 Std.
            number of strokes 286334 Stk.
            oil capacity 100 l
            Description :
            The machine is in good condition.


            • 3D CNC-Control Cybelec Modeva 15T with touchscreen
            • CNC-controlled Y1-, Y2-, X-, R-axis and motorized table crowning
            • two linear, digital scales at the top beam for the precise positioning bending position
            • back-gauge with four fingers, easily shifted in longitudal axis on linear rails by hand
            • X-axis on linear guides, driven by ball-screws
            • R-axis on linear guides, driven by ball-screws
            • German Safety-Laser Fiessler AKAS II including PLC-safety controller
            • motorized table crowning for the compensation of the table- and top-beam-deflection
            • control panel on the right side of machine
            • massive, low-maintenance quadruple guide system of the top beam
            • manual quick release top-tool-clamping, Promecam/Amada
            • foot-pedal on mobile console with emergency-stop button
            • four pieces of quickset front sheet-support-arms on linear rails
            • double overload protection against slant-position of top beam
            • monitoring of the relative position between the cylinders during pressing
            • high quality linear scales with a resolution of 0,01mm
            • direct programming of the angle
            • programmable bending and return speed of top beam
            • manual, semi-automatic and automatic mode
            • CNC calculated pressing-force
            • hydraulic block with German components (Rexroth)
            • hydraulic system with overload protection
            • cylinders manufactured out of one block
            • big hydraulic tank to keep the oil-temperature on a constant level
            • users-manual (PL) with declaration of CE-conformity

            +CNC-Controller DELEM DA 66T
            +CNC-controlled Z1/Z2-axis
            +CNC-controlled Delta X-axis +/- 125 mm
          Datasheet
          Request / Contact
          used  Hydr. pressbrake TRUMPF TruBend 3120


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100228 · Hydr. pressbrake

          TRUMPF - TruBend 3120 - - 2008 -

          Technical details
          Power max. 1200 kN︱Working width max. 3110 mm︱Width betw. Frames 2690 mm︱Throat C-Frame 420 mm︱Max tool high 347 mm︱Stroke maximum 200 mm︱Working speed 10 mm/s︱Way back gauge X 600 mm︱Back strokes speed 180 mm/s︱max. backgauge X 880 mm︱working hours total 7498 Std.︱oil capacity 200 l︱
          The machine is in good condition. Standard equipment: -modern 4 cylinder-bending system with high precision -hydro-electric bending with propotional-valves -Incline of upper beam Y1 Y2 +- 3mm -positioning of upper beam by glaslineal encoder -CNC X- and R-axis -manuel Z1 Z2 positioning of backgauge fingers with micro-switches in front of bending line -selfregulating crowning system -grahic programming -CNC DELEM 2D DA 65 TW -self centering tooling system of TRUMPF -2 front supports standard (CE-version) -hinged back stop fingers with 3 levels -oil tank made out of inox -oil cooling system -manuals
            Power max. 1200 kN
            Working width max. 3110 mm
            Width betw. Frames 2690 mm
            Throat C-Frame 420 mm
            Max tool high 347 mm
            Stroke maximum 200 mm
            Working speed 10 mm/s
            Way back gauge X 600 mm
            Back strokes speed 180 mm/s
            max. backgauge X 880 mm
            working hours total 7498 Std.
            oil capacity 200 l
            Description :
            The machine is in good condition.


            Standard equipment:
            -modern 4 cylinder-bending system with high precision
            -hydro-electric bending with propotional-valves
            -Incline of upper beam Y1 Y2 +- 3mm
            -positioning of upper beam by glaslineal encoder
            -CNC X- and R-axis
            -manuel Z1 Z2 positioning of backgauge fingers with micro-switches in front of bending line
            -selfregulating crowning system
            -grahic programming
            -CNC DELEM 2D DA 65 TW
            -self centering tooling system of TRUMPF
            -2 front supports standard (CE-version)
            -hinged back stop fingers with 3 levels
            -oil tank made out of inox
            -oil cooling system
            -manuals
          Datasheet
          Request / Contact
          used  Hydr. pressbrake TRUMPF TrumaBend C 66


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100149 · Hydr. pressbrake

          TRUMPF - TrumaBend C 66 - - 2006 -

          Technical details
          Power max. 660 kN︱Working width max. 2080 mm︱Width betw. Frames 1750 mm︱Throat C-Frame 420 mm︱Max tool high 342 mm︱Stroke maximum 200 mm︱Working speed 20 mm/s︱Electric Power 11 kW︱Way back gauge X 600 mm︱Back strokes speed 200 mm/s︱working hours total 21478 Std.︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. 1. Option Machine installation at the buyers location: Surcharge 3.000 € plus Transport and traveling costs -modern 4 cylinder-bending system with high precision -hydro-electric bending with propotional-valves -Incline of upper beam Y1 Y2 +- 3mm -positioning of upper beam by glaslineal encoder -CNC X- and R-axis -manuel Z1 Z2 positioning of backgauge fingers with micro-switches in front of bending line -selfregulating crowning system -grahic programming -CNC controll DA 65 TW in real-time windows -self centering tooling system of TRUMPF -2 front supports standard (CE-version) -hinged back stop fingers with 3 levels -oil tank made out of inox -oil cooling system -manuals - without bending tooling
            Power max. 660 kN
            Working width max. 2080 mm
            Width betw. Frames 1750 mm
            Throat C-Frame 420 mm
            Max tool high 342 mm
            Stroke maximum 200 mm
            Working speed 20 mm/s
            Electric Power 11 kW
            Way back gauge X 600 mm
            Back strokes speed 200 mm/s
            working hours total 21478 Std.
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.
            1. Option
            Machine installation at the buyers location:
            Surcharge 3.000 € plus Transport and traveling costs

            -modern 4 cylinder-bending system with high precision
            -hydro-electric bending with propotional-valves
            -Incline of upper beam Y1 Y2 +- 3mm
            -positioning of upper beam by glaslineal encoder
            -CNC X- and R-axis
            -manuel Z1 Z2 positioning of backgauge fingers with micro-switches in front of bending line
            -selfregulating crowning system
            -grahic programming
            -CNC controll DA 65 TW in real-time windows
            -self centering tooling system of TRUMPF
            -2 front supports standard (CE-version)
            -hinged back stop fingers with 3 levels
            -oil tank made out of inox
            -oil cooling system
            -manuals

            - without bending tooling
          Datasheet
          Request / Contact
          used  Hydr. pressbrake TRUMPF TrumaBend V 170x


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100173 · Hydr. pressbrake

          TRUMPF - TrumaBend V 170x - - 1998 -

          Technical details
          Power max. 1700 kN︱Working width max. 4080 mm︱Width betw. Frames 3680 mm︱Plate thickness max. 6 mm︱Throat C-Frame 410 mm︱Max tool high 535 mm︱Stroke maximum 365 mm︱Working speed 10 mm/s︱Electric Power 22 kW︱Way back gauge X 600 mm︱Back strokes speed 135 mm/s︱max. backgauge X 860 mm︱max. backgauge R 250 mm︱working hours total 65797 Std.︱oil capacity 350 l︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. 1. Option Machine installation at the buyers location: Surcharge 3.000 € plus Transport and traveling costs - Upper impulse draft in two cylinder installation Y1 / Y2 - electric-hydraulic ram in proportional valve-technology - ram-way measuring system with deflection compensation by glass measuring sticks - modern block hydraulic - spherical suspension and sloping position of the compressor beam - CNC backgauge system - finger adjustment securely from the front - 2 back stop finger - self-centred, manual, hardened top tools admission for vertical tool change - hardened, manual bottom tool admission - programmable lower tool-adjustment(I axis) for 2 positions - leveled front cover - modern safety shield - CE signs - oil cooler - owners manual - no bendig tools
            Power max. 1700 kN
            Working width max. 4080 mm
            Width betw. Frames 3680 mm
            Plate thickness max. 6 mm
            Throat C-Frame 410 mm
            Max tool high 535 mm
            Stroke maximum 365 mm
            Working speed 10 mm/s
            Electric Power 22 kW
            Way back gauge X 600 mm
            Back strokes speed 135 mm/s
            max. backgauge X 860 mm
            max. backgauge R 250 mm
            working hours total 65797 Std.
            oil capacity 350 l
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.
            1. Option
            Machine installation at the buyers location:
            Surcharge 3.000 € plus Transport and traveling costs

            - Upper impulse draft in two cylinder installation Y1 / Y2
            - electric-hydraulic ram in proportional valve-technology
            - ram-way measuring system with deflection compensation by glass measuring sticks
            - modern block hydraulic
            - spherical suspension and sloping position of the compressor beam
            - CNC backgauge system
            - finger adjustment securely from the front
            - 2 back stop finger
            - self-centred, manual, hardened top tools admission for vertical tool change
            - hardened, manual bottom tool admission
            - programmable lower tool-adjustment(I axis) for 2 positions
            - leveled front cover
            - modern safety shield
            - CE signs
            - oil cooler
            - owners manual

            - no bendig tools
          Datasheet
          Request / Contact
          used  Hydr. pressbrake TRUMPF Trumabend 125_3


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100062 · Hydr. pressbrake

          TRUMPF - Trumabend 125_3 - - 1993 -

          Technical details
          Power max. 1250 kN︱Working width max. 3050 mm︱Width betw. Frames 2550 mm︱Plate thickness max. 6 mm︱Throat C-Frame 300 mm︱Max tool high 500 mm︱Stroke maximum 200 mm︱Working speed 9 mm/s︱Electric Power 15 kW︱Way back gauge X 1000 mm︱Back strokes speed 100 mm/s︱working hours total 14500 Std.︱
          The machine is checked by authorized checklist through specialists. 2 Axe (X, R) CNC Backgauge Programmable lower tool-adjustment (I axis) for 3 positions Hydraulic top tool clamping Die hydraulic clamping CNC crowning Bending support BendGuard security light- guard-system Owner manuals + one set of tool
            Power max. 1250 kN
            Working width max. 3050 mm
            Width betw. Frames 2550 mm
            Plate thickness max. 6 mm
            Throat C-Frame 300 mm
            Max tool high 500 mm
            Stroke maximum 200 mm
            Working speed 9 mm/s
            Electric Power 15 kW
            Way back gauge X 1000 mm
            Back strokes speed 100 mm/s
            working hours total 14500 Std.
            Description :
            The machine is checked by authorized checklist through specialists.


            2 Axe (X, R) CNC Backgauge
            Programmable lower tool-adjustment (I axis) for 3 positions
            Hydraulic top tool clamping
            Die hydraulic clamping
            CNC crowning
            Bending support
            BendGuard security light- guard-system
            Owner manuals
            + one set of tool
          Datasheet
          Request / Contact

          Laser Cutting Machine

          used  Laser Cutting Machine TRUMPF TruLaser 3040 fiber (L50)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100300 · Laser Cutting Machine

          TRUMPF - TruLaser 3040 fiber (L50) - - 2016 -

          Technical details
          Movement X 4000 mm︱Movement Y 2000 mm︱Laser Power 4000 W︱Movement Z 115 mm︱X speed max. 100 m/min︱Y speed max. 100 m/min︱Z speed max. 100 m/min︱X-Y speed simult, max 245 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 20 mm︱Laser-Typ TruDisk 4001 -︱main switch on 17706 Std.︱time resonator beam on 7257 Std.︱time laser stand by 18198 Std.︱Plate thickness Co. max. 8 mm︱
          The machine is in good condition. Option 1: Workshop overhauled machine as per the TRUMPF checklist and free delivery of spare parts for 6 months after installation. Surcharge: 44.000 € plus Basic equipment: MACHINE - Closed frame with integrated blind cabinet - Automatic longitudinal pallet changer - Axis drive by linear motor technology and Torque - Optical fiber laser beam transmission - Cooling group - Built-in electrical cabinets with interior lighting - Longitudinal chip conveyor - Lighting of the work area - Positioning laser diode - Oil spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning LASER TRUMPF - Solid TruDisk 3001 (3 KW) solid-state laser with fiber optic output - Laser excitation by high-life diode module - Laser power control LASER CUTTING HEAD - Universal cutting head - Strategy a single cutting head - Protection window of the cutting head - Monitoring of the protection window - ControlLine DIGITAL CONTROL - CNC Sinumérik 840D SL - Integrated technology data (laser board) - 17 "color touch screen - Automatic shutdown - Programmable cutting gas pressure - FastLine - FlyLine - AdjustLine - Teleservice by internet - ContourLine - Microweld - Simple Workshop Programming - Quick reproduction DATA TRANSMISSION - USB interface - RJ45 card for network connection SECURITY - CE certifications - Optical safety barriers - compartmented suction device - Compact dust collector - Machine cab with certified safety glass (right door) - Sliding sunroof
            Movement X 4000 mm
            Movement Y 2000 mm
            Laser Power 4000 W
            Movement Z 115 mm
            X speed max. 100 m/min
            Y speed max. 100 m/min
            Z speed max. 100 m/min
            X-Y speed simult, max 245 m/min
            Plate thickness MS. max. 25 mm
            Max. workpiece weight 900 kg
            Plate thickness SS max. 20 mm
            Plate thickness Al. max. 20 mm
            Laser-Typ TruDisk 4001 -
            main switch on 17706 Std.
            time resonator beam on 7257 Std.
            time laser stand by 18198 Std.
            Plate thickness Co. max. 8 mm
            Description :
            The machine is in good condition.
            Option 1:
            Workshop overhauled machine as per the TRUMPF checklist and free delivery of spare parts for 6 months after installation.
            Surcharge: 44.000 € plus

            Basic equipment:
            MACHINE
            - Closed frame with integrated blind cabinet
            - Automatic longitudinal pallet changer
            - Axis drive by linear motor technology and Torque
            - Optical fiber laser beam transmission
            - Cooling group
            - Built-in electrical cabinets with interior lighting
            - Longitudinal chip conveyor
            - Lighting of the work area
            - Positioning laser diode
            - Oil spraying device
            - PierceLine
            - FocusLine
            - NitroLine
            - PlasmaLine
            - Automatic nozzle cleaning

            LASER TRUMPF
            - Solid TruDisk 3001 (3 KW) solid-state laser with fiber optic output
            - Laser excitation by high-life diode module
            - Laser power control

            LASER CUTTING HEAD
            - Universal cutting head
            - Strategy a single cutting head
            - Protection window of the cutting head
            - Monitoring of the protection window
            - ControlLine

            DIGITAL CONTROL
            - CNC Sinumérik 840D SL
            - Integrated technology data (laser board)
            - 17 "color touch screen
            - Automatic shutdown
            - Programmable cutting gas pressure
            - FastLine
            - FlyLine
            - AdjustLine
            - Teleservice by internet
            - ContourLine
            - Microweld
            - Simple Workshop Programming
            - Quick reproduction

            DATA TRANSMISSION
            - USB interface
            - RJ45 card for network connection

            SECURITY
            - CE certifications
            - Optical safety barriers
            - compartmented suction device
            - Compact dust collector
            - Machine cab with certified safety glass (right door)
            - Sliding sunroof
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 3030 (L20)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100299 · Laser Cutting Machine

          TRUMPF - TruLaser 3030 (L20) - - 2012 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X speed max. 100 m/min︱Y speed max. 100 m/min︱X-Y speed simult, max 140 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 12 mm︱Laser-Typ TruFlow 5000 -︱main switch on 49527 Std.︱time resonator beam on 23845 Std.︱time laser stand by 48307 Std.︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. Standardequipment machine: - closed machine frame with integrated laser unit, - movement unit for highly accurate processing, - Toryue-drive in combination with linear direct drive, - closed beam line, - a cutting head strategy, - cooling unit, - automatic pallet-changer in the longitudinal direction, - Conveyor, - 17" touch colour screen, - Work space lighting, - position laser diode, - spray device, - PierceLine, - NitroLine, - PlasmaLine Cutting head - LensLine, - Lens cutting head with 250mm focal length, - ControlLine Control - workshop programming, - simple workshop programming dir. Of DXF, - integrated technology files, - shutdown, - production plan, - programmable cutting gas pressure selection, - SprintLine, - ContourLine, - Microweld, - FastLine, - AdjustLine, - Teleservice, - diagnostic functions, - online-help, - FlyLine Date transmission - USB-interface, - RJ-45 network, Safety - CE-identification - light barriers - laser monitoring system - more chambers extraction plant - compact dust - machine-cladding with Makrolon panes Additional Accessories: + Lens and nozzle automation technology package including: - Nozzle changer - LensLine with automatic status control - Centering the beam + Productivity package for thin sheets, including : - compressed air cutting + CoolLine Without Cutting head 130mm focus
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 5000 W
            Movement Z 115 mm
            X speed max. 100 m/min
            Y speed max. 100 m/min
            X-Y speed simult, max 140 m/min
            Plate thickness MS. max. 25 mm
            Max. workpiece weight 900 kg
            Plate thickness SS max. 20 mm
            Plate thickness Al. max. 12 mm
            Laser-Typ TruFlow 5000 -
            main switch on 49527 Std.
            time resonator beam on 23845 Std.
            time laser stand by 48307 Std.
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.


            Standardequipment machine:

            - closed machine frame with integrated laser unit,
            - movement unit for highly accurate processing,
            - Toryue-drive in combination with linear direct drive,
            - closed beam line,
            - a cutting head strategy,
            - cooling unit,
            - automatic pallet-changer in the longitudinal direction,
            - Conveyor,
            - 17" touch colour screen,
            - Work space lighting,
            - position laser diode,
            - spray device,
            - PierceLine,
            - NitroLine,
            - PlasmaLine

            Cutting head
            - LensLine,
            - Lens cutting head with 250mm focal length,
            - ControlLine

            Control
            - workshop programming,
            - simple workshop programming dir. Of DXF,
            - integrated technology files,
            - shutdown,
            - production plan,
            - programmable cutting gas pressure selection,
            - SprintLine,
            - ContourLine,
            - Microweld,
            - FastLine,
            - AdjustLine,
            - Teleservice,
            - diagnostic functions,
            - online-help,
            - FlyLine

            Date transmission
            - USB-interface,
            - RJ-45 network,

            Safety
            - CE-identification
            - light barriers
            - laser monitoring system
            - more chambers extraction plant
            - compact dust
            - machine-cladding with Makrolon panes

            Additional Accessories:
            + Lens and nozzle automation technology package including:
            - Nozzle changer
            - LensLine with automatic status control
            - Centering the beam
            + Productivity package for thin sheets, including :
            - compressed air cutting
            + CoolLine

            Without Cutting head 130mm focus
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 5030 Fiber (L41)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100175 · Laser Cutting Machine

          TRUMPF - TruLaser 5030 Fiber (L41) - - 2012 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X-Y speed simult, max 245 m/min︱Plate thickness MS. max. 25 mm︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 20 mm︱Laser-Typ TruDisk 5001 -︱time resonator beam on 35041 Std.︱time laser stand by 50803 Std.︱Plate thickness Co. max. 10 mm︱
          The machine is in good condition. 1. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks Standard Machine Specification: Machine - working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Optional barrier-free installation - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Common ON-OFF Switch for machine and laser - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF laser - Solid State Laser TruDisk 3001 with 1 laser output - 1 fiber optic cable according standard layout (laser next to machine) - Chiller for laser cooling - Excitation by pumping diodes with high lifetime - Laser power control - Logbook function laser Cutting head - Universal cutting head with complete adaptive lense system - Single cutting head strategy - Safety glass to avoid lense contamination - ControlLine Control - Advanced Shop floor workshop programming - Easy Shop floor programming - Fast reproduction - Control Sinumerik 840D SL - 17" Touch screen - Integrated technology tables - Automatic shut-down device - Programmable cutting gas pressure - FastLine - Teleservice via internet - Integrated e-shop Data transmission - USB-interface Security - CE marking - Photocells - Monitoring System - Multi chamber suction system - compact dust - Machine cover with polycabonate discs This product is subject to US Export Control - ECCN 6A005. No reexport without permission of US government.
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 5000 W
            Movement Z 115 mm
            X-Y speed simult, max 245 m/min
            Plate thickness MS. max. 25 mm
            Plate thickness SS max. 20 mm
            Plate thickness Al. max. 20 mm
            Laser-Typ TruDisk 5001 -
            time resonator beam on 35041 Std.
            time laser stand by 50803 Std.
            Plate thickness Co. max. 10 mm
            Description :
            The machine is in good condition.

            1. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks

            Standard Machine Specification:

            Machine
            - working range in 3000 x 1500 mm
            - Closed machine
            - Integrated cabinet
            - Optional barrier-free installation
            - Automatic pallet changer in longitudinal direction
            - Torque drive in combination with direct linear drives
            - Enclosed beam delivery via fiber optic cable
            - Chiller for machine cooling
            - Integrated electrical cabinets with inside light
            - Common ON-OFF Switch for machine and laser
            - Conveyor belt for small parts / slug
            - Work area lighting
            - Positioning laser diode
            - Spray device
            - PierceLine
            - FocusLine
            - NitroLine
            - PlasmaLine
            - Automatic nozzle cleaning
            - Transport and assembly device

            TRUMPF laser
            - Solid State Laser TruDisk 3001 with 1 laser output
            - 1 fiber optic cable according standard layout (laser next to machine)
            - Chiller for laser cooling
            - Excitation by pumping diodes with high lifetime
            - Laser power control
            - Logbook function laser

            Cutting head
            - Universal cutting head with complete adaptive lense system
            - Single cutting head strategy
            - Safety glass to avoid lense contamination
            - ControlLine

            Control
            - Advanced Shop floor workshop programming
            - Easy Shop floor programming
            - Fast reproduction
            - Control Sinumerik 840D SL
            - 17" Touch screen
            - Integrated technology tables
            - Automatic shut-down device
            - Programmable cutting gas pressure
            - FastLine
            - Teleservice via internet
            - Integrated e-shop

            Data transmission
            - USB-interface

            Security
            - CE marking
            - Photocells
            - Monitoring System
            - Multi chamber suction system
            - compact dust
            - Machine cover with polycabonate discs


            This product is subject to US Export Control - ECCN 6A005.
            No reexport without permission of US government.
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 3030 (L20)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100301 · Laser Cutting Machine

          TRUMPF - TruLaser 3030 (L20) - - 2011 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 4000 W︱Movement Z 115 mm︱X speed max. 100 m/min︱Y speed max. 100 m/min︱X-Y speed simult, max 140 m/min︱Plate thickness MS. max. 20 mm︱Plate thickness SS max. 15 mm︱Plate thickness Al. max. 10 mm︱Laser-Typ TruFlow 4000 -︱main switch on 41501 Std.︱time resonator beam on 29976 Std.︱time laser stand by 40893 Std.︱
          The machine is in good condition. Standardequipment machine: - closed machine frame with integrated laser unit, - movement unit for highly accurate processing, - Toryue-drive in combination with linear direct drive, - closed beam line, - a cutting head strategy, - cooling unit, - automatic pallet-changer in the longitudinal direction, - Conveyor, - 17" touch colour screen, - Work space lighting, - position laser diode, - spray device, - PierceLine, - FocusLine, - NitroLine, - PlasmaLine TRUMPF laser - Maintenance-free turbo radial fan, - high frequency excitation, - TASC laser control, - Laser power control, - Logbook function laser Cutting head - LensLine, - Lens cutting head with 250mm focal length, - ControlLine Control - simple workshop programming, - Fast post-production, - integrated technology files, - shutdown, - production plan, - programmable cutting gas pressure selection, - ContourLine, - Microweld, - FastLine, - FlyLine - AdjustLine, - Teleservice via the Internet Date transmission - USB-interface, - RJ-45 network Safety - CE-identification, - light barriers, - laser monitoring system, - more chambers extraction plant, - compact dust, - machine-cladding with Makrolon panes Extended machine equipment: - Laser TruFlow 4000 with optimized standby incl. Beam tube ventilation with N2 - Technology package lens and nozzle automation (includes nozzle changer, beam centering unit and LensLine with automatic status check) - DetectLine: Precision sheet position sensing - LiftMaster (R) incl. loading station and unloading podest, peeling device, measuring device for thick sheets, exchangeable prongs - Separation of thin sheet metal (with S = 1-2mm)
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 4000 W
            Movement Z 115 mm
            X speed max. 100 m/min
            Y speed max. 100 m/min
            X-Y speed simult, max 140 m/min
            Plate thickness MS. max. 20 mm
            Plate thickness SS max. 15 mm
            Plate thickness Al. max. 10 mm
            Laser-Typ TruFlow 4000 -
            main switch on 41501 Std.
            time resonator beam on 29976 Std.
            time laser stand by 40893 Std.
            Description :
            The machine is in good condition.


            Standardequipment machine:

            - closed machine frame with integrated laser unit,
            - movement unit for highly accurate processing,
            - Toryue-drive in combination with linear direct drive,
            - closed beam line,
            - a cutting head strategy,
            - cooling unit,
            - automatic pallet-changer in the longitudinal direction,
            - Conveyor,
            - 17" touch colour screen,
            - Work space lighting,
            - position laser diode,
            - spray device,
            - PierceLine,
            - FocusLine,
            - NitroLine,
            - PlasmaLine

            TRUMPF laser
            - Maintenance-free turbo radial fan,
            - high frequency excitation,
            - TASC laser control,
            - Laser power control,
            - Logbook function laser

            Cutting head
            - LensLine,
            - Lens cutting head with 250mm focal length,
            - ControlLine

            Control
            - simple workshop programming,
            - Fast post-production,
            - integrated technology files,
            - shutdown,
            - production plan,
            - programmable cutting gas pressure selection,
            - ContourLine,
            - Microweld,
            - FastLine,
            - FlyLine
            - AdjustLine,
            - Teleservice via the Internet

            Date transmission
            - USB-interface,
            - RJ-45 network

            Safety
            - CE-identification,
            - light barriers,
            - laser monitoring system,
            - more chambers extraction plant,
            - compact dust,
            - machine-cladding with Makrolon panes


            Extended machine equipment:

            - Laser TruFlow 4000 with optimized standby incl. Beam tube ventilation with N2
            - Technology package lens and nozzle automation
            (includes nozzle changer, beam centering unit and LensLine with automatic status check)
            - DetectLine: Precision sheet position sensing

            - LiftMaster (R)
            incl. loading station and unloading podest, peeling device, measuring device for thick sheets, exchangeable prongs
            - Separation of thin sheet metal (with S = 1-2mm)
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 3040 (L32)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100284 · Laser Cutting Machine

          TRUMPF - TruLaser 3040 (L32) - - 2011 -

          Technical details
          Movement X 4000 mm︱Movement Y 2000 mm︱Laser Power 5000 W︱Movement Z 115 mm︱Plate thickness MS. max. 25 mm︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 15 mm︱Laser-Typ TLF 5000 -︱main switch on 26904 Std.︱time resonator beam on 11740 Std.︱time laser stand by 26411 Std.︱
          The machine is in good condition. 1. Option: Machine installation and partially overhauling at buyers location including function guarantyand operator training: Surcharge 14.000 € plus Transport and traveling costs 2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 44.000 € plus Transport and traveling costs. Delivery time + 5 weeks Standard equipment machine: - Closed machine frame with integrated laser unit - Movement unit for highly accurate processing - Toryue-drive in combination with linear direct drive - Closed beam line - One cutting head strategy - cooling unit - automatic pallet-changer in the longitudinal direction - Conveyor - 17 "color touch screen - Work space lighting - Position laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine Laser TRUMPF - Laser Co2 TruFlow 3200 with mode "Stand-by" - Radial turbine without service - Radio frequency excitation - Laser control TASC 3 - Powerlaser control - Logbook function laser Cutting head - Cutting head with focal length of 250 mm - A quick change of the cutting head (UTI) - LensLine with status check - ControlLine control - SINUMERIK 840D SL control - 17 "touch color screen - Easy handling - Simple workshop programming - Extended workshop programming - Fast post-production - Integrated technology data - Automatic switch-off - ContourLine - FastLine - FlyLine - Microweld - production plan - AdjustLine - Teleservice Data transfer - USB interface - RJ-45 network connection security - CE marking - photocells - Multi-chamber suction system - Compact dedusting system - Machine cladding with Makrolon panes
            Movement X 4000 mm
            Movement Y 2000 mm
            Laser Power 5000 W
            Movement Z 115 mm
            Plate thickness MS. max. 25 mm
            Plate thickness SS max. 20 mm
            Plate thickness Al. max. 15 mm
            Laser-Typ TLF 5000 -
            main switch on 26904 Std.
            time resonator beam on 11740 Std.
            time laser stand by 26411 Std.
            Description :
            The machine is in good condition.
            1. Option: Machine installation and partially overhauling at buyers location including function guarantyand operator training:
            Surcharge 14.000 € plus Transport and traveling costs

            2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 44.000 € plus Transport and traveling costs. Delivery time + 5 weeks

            Standard equipment machine:

            - Closed machine frame with integrated laser unit
            - Movement unit for highly accurate processing
            - Toryue-drive in combination with linear direct drive
            - Closed beam line
            - One cutting head strategy
            - cooling unit
            - automatic pallet-changer in the longitudinal direction
            - Conveyor
            - 17 "color touch screen
            - Work space lighting
            - Position laser diode
            - Spray device
            - PierceLine
            - FocusLine
            - NitroLine
            - PlasmaLine

            Laser TRUMPF
            - Laser Co2 TruFlow 3200 with mode "Stand-by"
            - Radial turbine without service
            - Radio frequency excitation
            - Laser control TASC 3
            - Powerlaser control
            - Logbook function laser

            Cutting head
            - Cutting head with focal length of 250 mm
            - A quick change of the cutting head (UTI)
            - LensLine with status check
            - ControlLine

            control
            - SINUMERIK 840D SL control
            - 17 "touch color screen
            - Easy handling
            - Simple workshop programming
            - Extended workshop programming
            - Fast post-production
            - Integrated technology data
            - Automatic switch-off
            - ContourLine
            - FastLine
            - FlyLine
            - Microweld
            - production plan
            - AdjustLine
            - Teleservice

            Data transfer
            - USB interface
            - RJ-45 network connection

            security
            - CE marking
            - photocells
            - Multi-chamber suction system
            - Compact dedusting system
            - Machine cladding with Makrolon panes
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser Cell 7040 fiber


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100167 · Laser Cutting Machine

          TRUMPF - TruLaser Cell 7040 fiber - - 2010 -

          Technical details
          Movement X 4000 mm︱Movement Y 1500 mm︱Laser Power 3000 W︱Movement Z 750 mm︱X speed max. 80 m/min︱Y speed max. 80 m/min︱Z speed max. 80 m/min︱Plate thickness MS. max. 6 mm︱Plate thickness SS max. 4 mm︱Plate thickness Al. max. 4 mm︱Laser-Typ TruDisk 3001 -︱main switch on 69640 Std.︱time resonator beam on 69265 Std.︱time laser stand by 72840 Std.︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. 1 Option: Machine installation and operator instruction at buyers location: Surcharge 16.000 € plus Transport and traveling costs Standard features: - x = 4000, Y = 1500, Z = 750 mm - B = +/- 135 °; C = n x 360 ° - Laser unit: TruDisk 3001 with air-cooled cooler and pilot laser (switch) - LKK with 100uM and 30m - FocusLine - Optics recognition and magnetic coupling - Sinumerik 840 D controller: PC-based open control Hanging control panel - Teach panel with teach software Network card incl. Installation via Tele Service -Analoges modem for Tele Service   Additional equipment - increased laser power TruDisk 3001 - MDE interface - Laser cutting incl. 2 cutting gases (o2; N2), APC distance control, programmable cutting gas selection, setting device, analog value cutting, pressure setting, valves - Additional cutting gas compressed air - Dynamic cutting optics f = 150 mm incl. Sensor - Fastline Cell - workpiece counter - scrap conveyor belt - Configurable control interface on the workstation -exhaust pipes for rotation changer - Protective cabin Rotation changer incl. Light curtain, protective signal light - 2x additional laser protection window A4 - 2x loading status light Automation: - Rotation changer D=4000mm incl. Rear step protection
            Movement X 4000 mm
            Movement Y 1500 mm
            Laser Power 3000 W
            Movement Z 750 mm
            X speed max. 80 m/min
            Y speed max. 80 m/min
            Z speed max. 80 m/min
            Plate thickness MS. max. 6 mm
            Plate thickness SS max. 4 mm
            Plate thickness Al. max. 4 mm
            Laser-Typ TruDisk 3001 -
            main switch on 69640 Std.
            time resonator beam on 69265 Std.
            time laser stand by 72840 Std.
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.

            1 Option: Machine installation and operator instruction at buyers location:
            Surcharge 16.000 € plus Transport and traveling costs

            Standard features:
            - x = 4000, Y = 1500, Z = 750 mm
            - B = +/- 135 °; C = n x 360 °

            - Laser unit: TruDisk 3001 with air-cooled cooler and pilot laser (switch)
            - LKK with 100uM and 30m
            - FocusLine
            - Optics recognition and magnetic coupling
            - Sinumerik 840 D controller: PC-based open control
            Hanging control panel
            - Teach panel with teach software
            Network card incl. Installation via Tele Service
            -Analoges modem for Tele Service
             
            Additional equipment
            - increased laser power TruDisk 3001
            - MDE interface
            - Laser cutting incl. 2 cutting gases (o2; N2), APC distance control, programmable cutting gas selection, setting device, analog value cutting, pressure setting, valves
            - Additional cutting gas compressed air
            - Dynamic cutting optics f = 150 mm incl. Sensor
            - Fastline Cell
            - workpiece counter
            - scrap conveyor belt
            - Configurable control interface on the workstation
            -exhaust pipes for rotation changer

            - Protective cabin Rotation changer incl. Light curtain, protective signal light
            - 2x additional laser protection window A4
            - 2x loading status light


            Automation:

            - Rotation changer D=4000mm incl. Rear step protection
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 3030 (L20) Quer


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100311 · Laser Cutting Machine

          TRUMPF - TruLaser 3030 (L20) Quer - - 2010 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 3200 W︱Movement Z 115 mm︱X speed max. 100 m/min︱Y speed max. 100 m/min︱X-Y speed simult, max 140 m/min︱Plate thickness MS. max. 20 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 15 mm︱Plate thickness Al. max. 10 mm︱Laser-Typ TruFlow 3200 -︱time resonator beam on 15122 Std.︱time laser stand by 25501 Std.︱
          The machine is in good condition. 1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty: Surcharge 25.000 € plus Transport and traveling costs 2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 58.000 € plus Transport and traveling costs. Delivery time + 5 weeks Standardequipment machine: - closed machine frame with integrated laser unit, - movement unit for highly accurate processing, - Toryue-drive in combination with linear direct drive, - closed beam line, - a cutting head strategy, - cooling unit, - automatic pallet-changer in the longitudinal direction, - Conveyor, - 17" touch colour screen, - Work space lighting, - position laser diode, - spray device, - PierceLine, - NitroLine, - PlasmaLine Cutting head - LensLine, - Lens cutting head with 250mm focal length, - ControlLine Control - workshop programming, - simple workshop programming dir. Of DXF, - integrated technology files, - shutdown, - production plan, - programmable cutting gas pressure selection, - SprintLine, - ContourLine, - Microweld, - FastLine, - AdjustLine, - Teleservice, - diagnostic functions, - online-help, - FlyLine Date transmission - USB-interface, - RJ-45 network, Safety - CE-identification, - light barriers, - laser monitoring system, - more chambers extraction plant, - compact dust, - machine-cladding with Makrolon panes
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 3200 W
            Movement Z 115 mm
            X speed max. 100 m/min
            Y speed max. 100 m/min
            X-Y speed simult, max 140 m/min
            Plate thickness MS. max. 20 mm
            Max. workpiece weight 900 kg
            Plate thickness SS max. 15 mm
            Plate thickness Al. max. 10 mm
            Laser-Typ TruFlow 3200 -
            time resonator beam on 15122 Std.
            time laser stand by 25501 Std.
            Description :
            The machine is in good condition.
            1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty:
            Surcharge 25.000 € plus Transport and traveling costs

            2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 58.000 € plus Transport and traveling costs. Delivery time + 5 weeks

            Standardequipment machine:

            - closed machine frame with integrated laser unit,
            - movement unit for highly accurate processing,
            - Toryue-drive in combination with linear direct drive,
            - closed beam line,
            - a cutting head strategy,
            - cooling unit,
            - automatic pallet-changer in the longitudinal direction,
            - Conveyor,
            - 17" touch colour screen,
            - Work space lighting,
            - position laser diode,
            - spray device,
            - PierceLine,
            - NitroLine,
            - PlasmaLine

            Cutting head
            - LensLine,
            - Lens cutting head with 250mm focal length,
            - ControlLine

            Control
            - workshop programming,
            - simple workshop programming dir. Of DXF,
            - integrated technology files,
            - shutdown,
            - production plan,
            - programmable cutting gas pressure selection,
            - SprintLine,
            - ContourLine,
            - Microweld,
            - FastLine,
            - AdjustLine,
            - Teleservice,
            - diagnostic functions,
            - online-help,
            - FlyLine

            Date transmission
            - USB-interface,
            - RJ-45 network,

            Safety
            - CE-identification,
            - light barriers,
            - laser monitoring system,
            - more chambers extraction plant,
            - compact dust,
            - machine-cladding with Makrolon panes
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 3040 (L32)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100297 · Laser Cutting Machine

          TRUMPF - TruLaser 3040 (L32) - - 2010 -

          Technical details
          Movement X 4000 mm︱Movement Y 2000 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X-Y speed simult, max 140 m/min︱Plate thickness MS. max. 25 mm︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 12 mm︱Laser-Typ TruFlow 5000 -︱time resonator beam on 18500 Std.︱time laser stand by 38000 Std.︱
          The machine is in good condition. Option 1: Machine installation and service at buyers location including function guaranty and operator training: Surcharge 9.000 € plus Transport and traveling costs Option 2: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks Standard equipment machine: - Closed machine frame with integrated laser unit - Movement unit for highly accurate processing - Toryue-drive in combination with linear direct drive - Closed beam line - One cutting head strategy - cooling unit - automatic pallet-changer in the longitudinal direction - Conveyor - 17 "color touch screen - Work space lighting - Position laser diode - Spray device - PierceLine - NitroLine - PlasmaLine - Simple programming workshop Laser TRUMPF - Laser Co2 TruFlow 4000 with mode "Stand-by" - Radial turbine without service - Radio frequency excitation - Laser control TASC 3 - Powerlaser control - Logbook function laser Cutting head - LensLine with status check - Cutting head with focal length of 250 mm - A quick change of the cutting head (UTI) - ControlLine Control - Workshop Programming - Simple workshop programming directly from * .DXF control Sinumerik 840D SL - Integrated technology data - Automatic shutdown - Production Plan - Programmable cutting gas / pressure selection - SprintLine - ContourLine - MicroWeld - FastLine - Flyline - AdjustLine - Teleservices Date transmission - USB-interface - RJ-45 network Safety - CE-identification - light barriers - laser monitoring system - more chambers extraction plant - compact dust - machine-cladding with Makrolon panes
            Movement X 4000 mm
            Movement Y 2000 mm
            Laser Power 5000 W
            Movement Z 115 mm
            X-Y speed simult, max 140 m/min
            Plate thickness MS. max. 25 mm
            Plate thickness SS max. 20 mm
            Plate thickness Al. max. 12 mm
            Laser-Typ TruFlow 5000 -
            time resonator beam on 18500 Std.
            time laser stand by 38000 Std.
            Description :
            The machine is in good condition.
            Option 1:
            Machine installation and service at buyers location including function guaranty and operator training: Surcharge 9.000 € plus Transport and traveling costs

            Option 2:
            Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks

            Standard equipment machine:

            - Closed machine frame with integrated laser unit
            - Movement unit for highly accurate processing
            - Toryue-drive in combination with linear direct drive
            - Closed beam line
            - One cutting head strategy
            - cooling unit
            - automatic pallet-changer in the longitudinal direction
            - Conveyor
            - 17 "color touch screen
            - Work space lighting
            - Position laser diode
            - Spray device
            - PierceLine
            - NitroLine
            - PlasmaLine
            - Simple programming workshop

            Laser TRUMPF
            - Laser Co2 TruFlow 4000 with mode "Stand-by"
            - Radial turbine without service
            - Radio frequency excitation
            - Laser control TASC 3
            - Powerlaser control
            - Logbook function laser

            Cutting head
            - LensLine with status check
            - Cutting head with focal length of 250 mm
            - A quick change of the cutting head (UTI)
            - ControlLine

            Control
            - Workshop Programming
            - Simple workshop programming directly from * .DXF control Sinumerik 840D SL
            - Integrated technology data
            - Automatic shutdown
            - Production Plan
            - Programmable cutting gas / pressure selection
            - SprintLine
            - ContourLine
            - MicroWeld
            - FastLine
            - Flyline
            - AdjustLine
            - Teleservices

            Date transmission
            - USB-interface
            - RJ-45 network

            Safety
            - CE-identification
            - light barriers
            - laser monitoring system
            - more chambers extraction plant
            - compact dust
            - machine-cladding with Makrolon panes
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 3030 (L20)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100195 · Laser Cutting Machine

          TRUMPF - TruLaser 3030 (L20) - - 2010 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 3200 W︱Movement Z 115 mm︱X speed max. 100 m/min︱Y speed max. 100 m/min︱X-Y speed simult, max 140 m/min︱Plate thickness MS. max. 20 mm︱Max. workpiece weight 710 kg︱Plate thickness SS max. 12 mm︱Plate thickness Al. max. 8 mm︱Laser-Typ TruFlow 3200 -︱time resonator beam on 29742 Std.︱time laser stand by 49431 Std.︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. 1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty: Surcharge 15.000 € plus Transport and traveling costs 2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks Standard features: - Closed machine frame with integrated laser unit, - movement unit for high-precision machining, - Torque drive in combination with linear direct drives, - closed beam guidance, - one-cutting head strategy, - cooling unit, - Automatic pallet changer in the longitudinal direction, - Wide longitudinal conveyor belt, - 17 "touch color screen, - work room lighting, - position laser diode, - spraying device, - PierceLine, - FocusLine, - NitroLine, - PlasmaLine TRUMPF laser - TruFlow 3200 CO2 laser - Maintenance-friendly turbo radial fan - high frequency excitation - TASC laser control - Laser power control - Logbook function laser cutting head - LensLine with condition check, - lens cutting head with 250mm focal length, - Universal cutting head quick-change device (UTI), - ControlLine: height control and sheet metal edge detection, control - Simple / advanced workshop programming, - Fast post-production - Sinumerik 840D SL control - Integrated technology data, - automatic switch-off, - Programmable cutting gas / pressure selection - ContourLine, - production schedule - AdjustLine, - teleservice, data transfer - USB interface, - RJ-45 network connection safety - CE marking, - light barriers, - Laser surveillance system - multi-chamber suction system, - Compact dedusting system! - Machine cladding with Makrolon disks
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 3200 W
            Movement Z 115 mm
            X speed max. 100 m/min
            Y speed max. 100 m/min
            X-Y speed simult, max 140 m/min
            Plate thickness MS. max. 20 mm
            Max. workpiece weight 710 kg
            Plate thickness SS max. 12 mm
            Plate thickness Al. max. 8 mm
            Laser-Typ TruFlow 3200 -
            time resonator beam on 29742 Std.
            time laser stand by 49431 Std.
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.

            1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty:
            Surcharge 15.000 € plus Transport and traveling costs

            2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks

            Standard features:
            - Closed machine frame with integrated laser unit,
            - movement unit for high-precision machining,
            - Torque drive in combination with linear direct drives,
            - closed beam guidance,
            - one-cutting head strategy,
            - cooling unit,
            - Automatic pallet changer in the longitudinal direction,
            - Wide longitudinal conveyor belt,
            - 17 "touch color screen,
            - work room lighting,
            - position laser diode,
            - spraying device,
            - PierceLine,
            - FocusLine,
            - NitroLine,
            - PlasmaLine

            TRUMPF laser
            - TruFlow 3200 CO2 laser
            - Maintenance-friendly turbo radial fan
            - high frequency excitation
            - TASC laser control
            - Laser power control
            - Logbook function laser

            cutting head
            - LensLine with condition check,
            - lens cutting head with 250mm focal length,
            - Universal cutting head quick-change device (UTI),
            - ControlLine: height control and sheet metal edge detection,

            control
            - Simple / advanced workshop programming,
            - Fast post-production
            - Sinumerik 840D SL control
            - Integrated technology data,
            - automatic switch-off,
            - Programmable cutting gas / pressure selection
            - ContourLine,
            - production schedule
            - AdjustLine,
            - teleservice,

            data transfer
            - USB interface,
            - RJ-45 network connection

            safety
            - CE marking,
            - light barriers,
            - Laser surveillance system
            - multi-chamber suction system,
            - Compact dedusting system!
            - Machine cladding with Makrolon disks
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser Tube 7000 (T02)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100224 · Laser Cutting Machine

          TRUMPF - TruLaser Tube 7000 (T02) - - 2009 -

          Technical details
          Movement X 6500 mm︱Movement Y 250 mm︱Laser Power 3600 W︱Movement Z 150 mm︱X speed max. 100 m/min︱Y speed max. 60 m/min︱Z speed max. 60 m/min︱Plate thickness MS. max. 8 mm︱Max. workpiece weight 150 kg︱Plate thickness SS max. 5 mm︱Plate thickness Al. max. 3 mm︱Laser-Typ TruFlow 3600 -︱main switch on 22211 Std.︱time resonator beam on 6430 Std.︱time laser stand by 21787 Std.︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. Option 1: Setup and commissioning including operator training of the machine at the buyer. Surcharge € 29,000 + VAT; plus transportation and travel expenses - Gear: maintenance free - NitroLine - SprintLine - Programmable cutting gas pressure - Lens cutting head with 5" focal length - ControlLine - Cutting head quick change device - Laser power control - Laser logbook function - Automatic shut-down device - Work area lighting - Sinumerik 840D - RJ45 network connection, and USB-interface disc drive - CE marking - Multi-beam light barriers - Compact dust extraction unit 600 Nm³/h - safety cabin with Macrolon panels - Clamping jaws D20-85 mm, D85-150 mm - V-shaped form cups and guide rollers for round tubes - U-shaped form cups and guide rollers with D = 120 mm - Part removal station PRS 3001 with conveyor table
            Movement X 6500 mm
            Movement Y 250 mm
            Laser Power 3600 W
            Movement Z 150 mm
            X speed max. 100 m/min
            Y speed max. 60 m/min
            Z speed max. 60 m/min
            Plate thickness MS. max. 8 mm
            Max. workpiece weight 150 kg
            Plate thickness SS max. 5 mm
            Plate thickness Al. max. 3 mm
            Laser-Typ TruFlow 3600 -
            main switch on 22211 Std.
            time resonator beam on 6430 Std.
            time laser stand by 21787 Std.
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.
            Option 1: Setup and commissioning including operator training of the machine at the buyer.

            Surcharge € 29,000 + VAT; plus transportation and travel expenses

            - Gear: maintenance free
            - NitroLine
            - SprintLine

            - Programmable cutting gas pressure
            - Lens cutting head with 5" focal length
            - ControlLine
            - Cutting head quick change device

            - Laser power control
            - Laser logbook function
            - Automatic shut-down device
            - Work area lighting

            - Sinumerik 840D
            - RJ45 network connection, and USB-interface disc drive

            - CE marking
            - Multi-beam light barriers
            - Compact dust extraction unit 600 Nm³/h
            - safety cabin with Macrolon panels

            - Clamping jaws D20-85 mm, D85-150 mm
            - V-shaped form cups and guide rollers for round tubes
            - U-shaped form cups and guide rollers with D = 120 mm

            - Part removal station PRS 3001 with conveyor table
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 3030


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100216 · Laser Cutting Machine

          TRUMPF - TruLaser 3030 - - 2008 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 3200 W︱Movement Z 115 mm︱X speed max. 60 m/min︱Y speed max. 60 m/min︱Z speed max. 60 m/min︱X-Y speed simult, max 84 m/min︱Plate thickness MS. max. 20 mm︱Max. workpiece weight 710 kg︱Plate thickness SS max. 12 mm︱Plate thickness Al. max. 8 mm︱Laser-Typ TLF 3200 Turbo -︱main switch on 18374 Std.︱time resonator beam on 6997 Std.︱time laser stand by 11922 Std.︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 5"-Lense - Cutting head with 7,5"-Lense - Cutting head quick change device - metal sheet position detection system - programmable cutting-gas choice and pressure  adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - automatic switch-off  - Safety Light Barriers - ToPs 100 lite programming system - tele service installation - RJ 45 network connection - 3,5- Disk drive - operators manual Including: + Air cutting + PierceLine (PCS)
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 3200 W
            Movement Z 115 mm
            X speed max. 60 m/min
            Y speed max. 60 m/min
            Z speed max. 60 m/min
            X-Y speed simult, max 84 m/min
            Plate thickness MS. max. 20 mm
            Max. workpiece weight 710 kg
            Plate thickness SS max. 12 mm
            Plate thickness Al. max. 8 mm
            Laser-Typ TLF 3200 Turbo -
            main switch on 18374 Std.
            time resonator beam on 6997 Std.
            time laser stand by 11922 Std.
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.


            Standard equipment:
            - HI-LAS high-pressure-cutting
            - Cutting head with 5"-Lense
            - Cutting head with 7,5"-Lense
            - Cutting head quick change device
            - metal sheet position detection system
            - programmable cutting-gas choice and pressure  adjustment
            - Microweld
            - PMS Plasma Monitoring System
            - Sprint-Las
            - capacitive height regulation (DIAS III)
            - ContourLas
            - AutoLas Plus
            - Oil-Spray function
            - autom. Pallet-changing
            - lit working chamber
            - small parts/waste conveyor
            - multi-chamber suction system
            - Compact dust extractor
            - automatic switch-off 
            - Safety Light Barriers
            - ToPs 100 lite programming system
            - tele service installation
            - RJ 45 network connection
            - 3,5- Disk drive
            - operators manual

            Including:
            + Air cutting
            + PierceLine (PCS)
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 5030 (L16)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100272 · Laser Cutting Machine

          TRUMPF - TruLaser 5030 (L16) - - 2008 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 12 mm︱Laser-Typ TLF 5000 -︱main switch on 55034 Std.︱time resonator beam on 16804 Std.︱time laser stand by 53418 Std.︱
          The machine is in good condition. 1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty: Surcharge 9.000 € plus Transport and traveling costs 2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks Standard equipment: - closed machine frame with integrated laser generator - Movement unit for high-precision machining - Drives: Gantry drives combined with linear actuators - Closed beam guidance - One cutting head strategy - TFT-flat screen - Small parts and scrap metal conveyor - Automatic pallet changer - Lit working chamber - Positioning laser diode - Oil-spray function - Piercline - AutoLas Plus (FocusLine) - Hi-Las high pressure cutting (NitroLine) - PMS plasma detection (PlasmaLine) - CO2 Laser TruFlow 5000 - maintenance-free turbo radial blower - Cutting head with 250mm lens - Quick cutting head exchange mechanism - Lens monitoring (LensLine) - Capacitive height regulation APC and process control (ControlLine) - SINUMERIK 840D - Automatic shut-down system - ContourLas (ContourLine) - Sprintlas (FastLine) - FlyLine - Microweld - USB interface - RJ-45 network connection - CE marking - Light barriers - Multi chamber suction system - Compact dust extractor
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 5000 W
            Movement Z 115 mm
            X speed max. 200 m/min
            Y speed max. 200 m/min
            X-Y speed simult, max 300 m/min
            Plate thickness MS. max. 25 mm
            Max. workpiece weight 900 kg
            Plate thickness SS max. 20 mm
            Plate thickness Al. max. 12 mm
            Laser-Typ TLF 5000 -
            main switch on 55034 Std.
            time resonator beam on 16804 Std.
            time laser stand by 53418 Std.
            Description :
            The machine is in good condition.
            1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty:
            Surcharge 9.000 € plus Transport and traveling costs

            2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks

            Standard equipment:

            - closed machine frame with integrated laser generator
            - Movement unit for high-precision machining
            - Drives: Gantry drives combined with linear actuators
            - Closed beam guidance
            - One cutting head strategy
            - TFT-flat screen
            - Small parts and scrap metal conveyor
            - Automatic pallet changer
            - Lit working chamber
            - Positioning laser diode
            - Oil-spray function
            - Piercline
            - AutoLas Plus (FocusLine)
            - Hi-Las high pressure cutting (NitroLine)
            - PMS plasma detection (PlasmaLine)

            - CO2 Laser TruFlow 5000
            - maintenance-free turbo radial blower

            - Cutting head with 250mm lens
            - Quick cutting head exchange mechanism
            - Lens monitoring (LensLine)
            - Capacitive height regulation APC and process control (ControlLine)

            - SINUMERIK 840D
            - Automatic shut-down system
            - ContourLas (ContourLine)
            - Sprintlas (FastLine)
            - FlyLine
            - Microweld

            - USB interface
            - RJ-45 network connection

            - CE marking
            - Light barriers
            - Multi chamber suction system
            - Compact dust extractor
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TruLaser 3030


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100088 · Laser Cutting Machine

          TRUMPF - TruLaser 3030 - - 2008 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 3200 W︱Movement Z 115 mm︱X speed max. 60 m/min︱Y speed max. 60 m/min︱Z speed max. 60 m/min︱X-Y speed simult, max 84 m/min︱Plate thickness MS. max. 20 mm︱Max. workpiece weight 710 kg︱Plate thickness SS max. 12 mm︱Plate thickness Al. max. 8 mm︱Laser-Typ TLF 3200 Turbo -︱time resonator beam on 37080 Std.︱time laser stand by 66140 Std.︱
          The machine is overhauled in our workshop and will be sold with 6 month parts guaranty. 1 Option: Machine installation and operator training at buyers location: Surcharge 9.000 € plus Transport and traveling costs - HI-LAS high-pressure-cutting - Cutting head with 5"-Lense - Cutting head with 7,5"-Lense - Cutting head quick change device - metal sheet position detection system - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - laser power control - laser position diode - programmable power cycles - spray for the safe thick sheet metal work - ContourLas - AutoLas Plus - autom. Pallet-changing - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - automatic switch-off - Safety Light Barriers - ToPs 100 lite programming system - tele service installation - RJ 45 network connection - operators manual
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 3200 W
            Movement Z 115 mm
            X speed max. 60 m/min
            Y speed max. 60 m/min
            Z speed max. 60 m/min
            X-Y speed simult, max 84 m/min
            Plate thickness MS. max. 20 mm
            Max. workpiece weight 710 kg
            Plate thickness SS max. 12 mm
            Plate thickness Al. max. 8 mm
            Laser-Typ TLF 3200 Turbo -
            time resonator beam on 37080 Std.
            time laser stand by 66140 Std.
            Description :
            The machine is overhauled in our workshop and will be sold with 6 month parts guaranty.

            1 Option: Machine installation and operator training at buyers location:
            Surcharge 9.000 € plus Transport and traveling costs

            - HI-LAS high-pressure-cutting
            - Cutting head with 5"-Lense
            - Cutting head with 7,5"-Lense
            - Cutting head quick change device
            - metal sheet position detection system
            - programmable cutting-gas choice and pressure adjustment
            - Microweld
            - PMS Plasma Monitoring System
            - Sprint-Las
            - capacitive height regulation (DIAS III)
            - laser power control
            - laser position diode
            - programmable power cycles
            - spray for the safe thick sheet metal work

            - ContourLas
            - AutoLas Plus
            - autom. Pallet-changing
            - lit working chamber

            - small parts/waste conveyor
            - multi-chamber suction system
            - Compact dust extractor
            - automatic switch-off
            - Safety Light Barriers

            - ToPs 100 lite programming system
            - tele service installation
            - RJ 45 network connection
            - operators manual
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TC L 6050 (L10)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100302 · Laser Cutting Machine

          TRUMPF - TC L 6050 (L10) - - 2006 -

          Technical details
          Movement X 6000 mm︱Movement Y 2000 mm︱Laser Power 6000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱Z speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 2800 kg︱Plate thickness SS max. 25 mm︱Plate thickness Al. max. 15 mm︱Laser-Typ TLF 6000 -︱main switch on 41099 Std.︱time resonator beam on 9196 Std.︱time laser stand by 39363 Std.︱
          The machine is in good condition. Equipement Standard: - Champs d’action 2000 x 6000 - Laser CO2 TLF 6000 Turbo - Découpe haute pression HI-LAS - 1 Tête de découpe Laser avec lentille 5” - 1 Tête de découpe Laser avec lentille 7.5” - Détection automatique du bord de tôle (Lasermatic) - Suiveur de profil capacitif APC (Advanced Process Control) - Diode Laser de positionnement - Sélection et pression des gaz programmables - Dispositif de vaporisation d´huile - Cycles de travail programmables - PCS - PMS - LLS (Asservissement puissance Laser) - SprintLas - ContourLas - Microweld - Modem & télédiagnostic - AutoLas Plus - Carnet de bord - Changeur automatique de palettes - Eclairage de la zone de travail - Convoyeur longitudinal pour petites pièces et chutes - Caisson d’aspiration vers le bas et de dépoussiérage - Arrêt automatique - ToPs 100 Lite - Barrières optiques à plusieurs faisceaux - Carte réseau RJ45 Y compris : - 1 Tête de découpe Laser supplépentaire 10”
            Movement X 6000 mm
            Movement Y 2000 mm
            Laser Power 6000 W
            Movement Z 115 mm
            X speed max. 200 m/min
            Y speed max. 200 m/min
            Z speed max. 200 m/min
            X-Y speed simult, max 300 m/min
            Plate thickness MS. max. 25 mm
            Max. workpiece weight 2800 kg
            Plate thickness SS max. 25 mm
            Plate thickness Al. max. 15 mm
            Laser-Typ TLF 6000 -
            main switch on 41099 Std.
            time resonator beam on 9196 Std.
            time laser stand by 39363 Std.
            Description :
            The machine is in good condition.


            Equipement Standard:

            - Champs d’action 2000 x 6000
            - Laser CO2 TLF 6000 Turbo
            - Découpe haute pression HI-LAS
            - 1 Tête de découpe Laser avec lentille 5”
            - 1 Tête de découpe Laser avec lentille 7.5”
            - Détection automatique du bord de tôle (Lasermatic)
            - Suiveur de profil capacitif APC (Advanced Process Control)
            - Diode Laser de positionnement
            - Sélection et pression des gaz programmables
            - Dispositif de vaporisation d´huile
            - Cycles de travail programmables
            - PCS
            - PMS
            - LLS (Asservissement puissance Laser)
            - SprintLas
            - ContourLas
            - Microweld
            - Modem & télédiagnostic
            - AutoLas Plus
            - Carnet de bord
            - Changeur automatique de palettes
            - Eclairage de la zone de travail
            - Convoyeur longitudinal pour petites pièces et chutes
            - Caisson d’aspiration vers le bas et de dépoussiérage
            - Arrêt automatique
            - ToPs 100 Lite
            - Barrières optiques à plusieurs faisceaux
            - Carte réseau RJ45
            Y compris :
            - 1 Tête de découpe Laser supplépentaire 10”
          Datasheet
          Request / Contact
          used  Laser Cutting Machine Trumpf TruLaser 5030


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100200 · Laser Cutting Machine

          Trumpf - TruLaser 5030 - - 2006 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 15 mm︱Laser-Typ TruFlow 5000 -︱main switch on 49482 Std.︱time resonator beam on 19828 Std.︱
          The machine is in good condition. Standard equipment: - closed machine frame with integrated laser generator - automatic pallet changer - small parts and scrap metall conveyor - Drives: Gantry drives combined with linear actuators - quick cutting head exchange mechanism - cutting head with 5 , 7,5 lense - programmable cutting gas - Automatic sheet position sensing system - ControLine - PierceLine (PCS) - prog. Cutting gas selection/pressure setting - MicroWeld - PlasmaLine (PMS) - SprintLine - ContourLine - FastLine - FocusLine - Laser power control (LLS) - Oli spray device - Laser power control - automatic nozzle cleaning - Light fittings for working area - automatic shut-down system - lit working chamber - security installations (sensor barrier, capsuled beam guide) - multi chamber suction system - Compact dust extractor - ToPs 100 lite programming system - RJ 45 network connection - 3,5- Disk drive - USB connection - TFT-flat screen - operators manual
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 5000 W
            Movement Z 115 mm
            X speed max. 200 m/min
            Y speed max. 200 m/min
            X-Y speed simult, max 300 m/min
            Plate thickness MS. max. 25 mm
            Max. workpiece weight 900 kg
            Plate thickness SS max. 20 mm
            Plate thickness Al. max. 15 mm
            Laser-Typ TruFlow 5000 -
            main switch on 49482 Std.
            time resonator beam on 19828 Std.
            Description :
            The machine is in good condition.


            Standard equipment:
            - closed machine frame with integrated laser generator
            - automatic pallet changer
            - small parts and scrap metall conveyor
            - Drives: Gantry drives combined with linear actuators
            - quick cutting head exchange mechanism
            - cutting head with 5 , 7,5 lense
            - programmable cutting gas
            - Automatic sheet position sensing system
            - ControLine
            - PierceLine (PCS)
            - prog. Cutting gas selection/pressure setting
            - MicroWeld
            - PlasmaLine (PMS)
            - SprintLine
            - ContourLine
            - FastLine
            - FocusLine
            - Laser power control (LLS)
            - Oli spray device
            - Laser power control
            - automatic nozzle cleaning
            - Light fittings for working area
            - automatic shut-down system
            - lit working chamber
            - security installations (sensor barrier, capsuled beam guide)
            - multi chamber suction system
            - Compact dust extractor
            - ToPs 100 lite programming system
            - RJ 45 network connection
            - 3,5- Disk drive
            - USB connection
            - TFT-flat screen
            - operators manual
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TC L 3050 (L15)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100270 · Laser Cutting Machine

          TRUMPF - TC L 3050 (L15) - - 2006 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 6000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 25 mm︱Plate thickness Al. max. 15 mm︱Laser-Typ TLF 6000 -︱main switch on 50049 Std.︱time resonator beam on 20967 Std.︱time laser stand by 49668 Std.︱
          The machine is in good condition. 1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty: Surcharge 9.000 € plus Transport and traveling costs 2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 5"-Lense - Cutting head with 7.5"-Lense - Cutting head quick change device - metal sheet position detection system - Laser position diode - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - autom. Injection cleaner - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - automatic switch-off - Safety Light Barriers - ToPs 100 lite programming system - RJ 45 network connection - operators manual
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 6000 W
            Movement Z 115 mm
            X speed max. 200 m/min
            Y speed max. 200 m/min
            X-Y speed simult, max 300 m/min
            Plate thickness MS. max. 25 mm
            Max. workpiece weight 900 kg
            Plate thickness SS max. 25 mm
            Plate thickness Al. max. 15 mm
            Laser-Typ TLF 6000 -
            main switch on 50049 Std.
            time resonator beam on 20967 Std.
            time laser stand by 49668 Std.
            Description :
            The machine is in good condition.
            1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty:
            Surcharge 9.000 € plus Transport and traveling costs

            2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 38.000 € plus Transport and traveling costs. Delivery time + 5 weeks

            Standard equipment:

            - HI-LAS high-pressure-cutting
            - Cutting head with 5"-Lense
            - Cutting head with 7.5"-Lense
            - Cutting head quick change device
            - metal sheet position detection system

            - Laser position diode
            - programmable cutting-gas choice and pressure adjustment
            - Microweld
            - PMS Plasma Monitoring System
            - Sprint-Las
            - capacitive height regulation (DIAS III)

            - ContourLas
            - AutoLas Plus
            - Oil-Spray function
            - autom. Pallet-changing
            - autom. Injection cleaner
            - lit working chamber

            - small parts/waste conveyor
            - multi-chamber suction system
            - Compact dust extractor
            - automatic switch-off
            - Safety Light Barriers

            - ToPs 100 lite programming system
            - RJ 45 network connection
            - operators manual
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TC L 3050 (L15) A


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100290 · Laser Cutting Machine

          TRUMPF - TC L 3050 (L15) A - - 2006 -

          Technical details
          Movement X 3000 mm︱Movement Y 1500 mm︱Laser Power 5000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 900 kg︱Plate thickness SS max. 20 mm︱Plate thickness Al. max. 12 mm︱Laser-Typ TLF 5000 -︱main switch on 53838 Std.︱time resonator beam on 17728 Std.︱time laser stand by 53461 Std.︱
          The machine is in good condition. 1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty: Surcharge 12.000 € plus Transport and traveling costs 2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 42.000 € plus Transport and traveling costs. Delivery time + 5 weeks Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 5"-Lense - Cutting head with 7.5"-Lense - Cutting head quick change device - metal sheet position detection system - Laser position diode - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - autom. Injection cleaner - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - automatic switch-off - Safety Light Barriers - ToPs 100 lite programming system - RJ 45 network connection - 3,5- Disk drive - operators manual Additional equipment: + Cutting head with 3.75"-Lense + PCS Process Control System (monitored piercing)
            Movement X 3000 mm
            Movement Y 1500 mm
            Laser Power 5000 W
            Movement Z 115 mm
            X speed max. 200 m/min
            Y speed max. 200 m/min
            X-Y speed simult, max 300 m/min
            Plate thickness MS. max. 25 mm
            Max. workpiece weight 900 kg
            Plate thickness SS max. 20 mm
            Plate thickness Al. max. 12 mm
            Laser-Typ TLF 5000 -
            main switch on 53838 Std.
            time resonator beam on 17728 Std.
            time laser stand by 53461 Std.
            Description :
            The machine is in good condition.

            1. Option: Machine installation, operator training at buyers location and partially overhauling including function guaranty:
            Surcharge 12.000 € plus Transport and traveling costs

            2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 42.000 € plus Transport and traveling costs. Delivery time + 5 weeks

            Standard equipment:

            - HI-LAS high-pressure-cutting
            - Cutting head with 5"-Lense
            - Cutting head with 7.5"-Lense
            - Cutting head quick change device
            - metal sheet position detection system

            - Laser position diode
            - programmable cutting-gas choice and pressure adjustment
            - Microweld
            - PMS Plasma Monitoring System
            - Sprint-Las
            - capacitive height regulation (DIAS III)

            - ContourLas
            - AutoLas Plus
            - Oil-Spray function
            - autom. Pallet-changing
            - autom. Injection cleaner
            - lit working chamber

            - small parts/waste conveyor
            - multi-chamber suction system
            - Compact dust extractor
            - automatic switch-off
            - Safety Light Barriers

            - ToPs 100 lite programming system
            - RJ 45 network connection
            - 3,5- Disk drive
            - operators manual

            Additional equipment:
            + Cutting head with 3.75"-Lense
            + PCS Process Control System (monitored piercing)
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TC L 4050 (L09)


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100264 · Laser Cutting Machine

          TRUMPF - TC L 4050 (L09) - - 2005 -

          Technical details
          Movement X 4000 mm︱Movement Y 2000 mm︱Laser Power 6000 W︱Movement Z 115 mm︱X speed max. 200 m/min︱Y speed max. 200 m/min︱Z speed max. 200 m/min︱X-Y speed simult, max 300 m/min︱Plate thickness MS. max. 25 mm︱Max. workpiece weight 1800 kg︱Plate thickness SS max. 25 mm︱Plate thickness Al. max. 15 mm︱Laser-Typ TLF 6000 -︱main switch on 59803 Std.︱time resonator beam on 15834 Std.︱time laser stand by 59735 Std.︱
          The machine is in good condition. 1. Option: Machine installation and partially overhauling at buyers location including function guarantyand operator training: Surcharge 14.000 € plus Transport and traveling costs 2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation. Surcharge: 44.000 € plus Transport and traveling costs. Delivery time + 5 weeks Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 7.5"-Lense - Cutting head quick change device - metal sheet position detection system - Laser position diode - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - autom. Injection cleaner - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - automatic switch-off - Safety Light Barriers - ToPs 100 lite programming system - RJ 45 network connection - 3,5- Disk drive - operators manual
            Movement X 4000 mm
            Movement Y 2000 mm
            Laser Power 6000 W
            Movement Z 115 mm
            X speed max. 200 m/min
            Y speed max. 200 m/min
            Z speed max. 200 m/min
            X-Y speed simult, max 300 m/min
            Plate thickness MS. max. 25 mm
            Max. workpiece weight 1800 kg
            Plate thickness SS max. 25 mm
            Plate thickness Al. max. 15 mm
            Laser-Typ TLF 6000 -
            main switch on 59803 Std.
            time resonator beam on 15834 Std.
            time laser stand by 59735 Std.
            Description :
            The machine is in good condition.

            1. Option: Machine installation and partially overhauling at buyers location including function guarantyand operator training:
            Surcharge 14.000 € plus Transport and traveling costs

            2. Option: Workshop overhauled machine including technical approval by manufacturers’ directive at our workshop. Machine installation, operator training and free delivery of spare parts for 6 months after installation.
            Surcharge: 44.000 € plus Transport and traveling costs. Delivery time + 5 weeks

            Standard equipment:

            - HI-LAS high-pressure-cutting
            - Cutting head with 7.5"-Lense
            - Cutting head quick change device
            - metal sheet position detection system

            - Laser position diode
            - programmable cutting-gas choice and pressure adjustment
            - Microweld
            - PMS Plasma Monitoring System
            - Sprint-Las
            - capacitive height regulation (DIAS III)

            - ContourLas
            - AutoLas Plus
            - Oil-Spray function
            - autom. Pallet-changing
            - autom. Injection cleaner
            - lit working chamber

            - small parts/waste conveyor
            - multi-chamber suction system
            - Compact dust extractor
            - automatic switch-off
            - Safety Light Barriers

            - ToPs 100 lite programming system
            - RJ 45 network connection
            - 3,5- Disk drive
            - operators manual
          Datasheet
          Request / Contact
          used  Laser Cutting Machine TRUMPF TC L 4030


          • Broziat GmbH
          • Vorwerker Str. 62a-64
          • 23554 Lübeck
          • Deutschland

          • +49 451 40 40 19
            +49 451 40 73 93
          • info@Broziat.de
            https://broziat.com
          #2040-100312 · Laser Cutting Machine

          TRUMPF - TC L 4030 - - 2005 -

          Technical details
          Movement X 4000 mm︱Movement Y 2000 mm︱Laser Power 4000 W︱Movement Z 115 mm︱X-Y speed simult, max 85 m/min︱Plate thickness MS. max. 20 mm︱Plate thickness SS max. 15 mm︱Plate thickness Al. max. 10 mm︱Laser-Typ TLF 4000 -︱time resonator beam on 11374 Std.︱time laser stand by 26443 Std.︱
          The machine is in good condition. Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 5"-Lense - Cutting head with 7,5"-Lense - Cutting head quick change device - metal sheet position detection system - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - autom. Pallet-changing - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - automatic switch-off - Safety Light Barriers - ToPs 100 lite programming system - RJ 45 network connection - 3,5- Disk drive
            Movement X 4000 mm
            Movement Y 2000 mm
            Laser Power 4000 W
            Movement Z 115 mm
            X-Y speed simult, max 85 m/min
            Plate thickness MS. max. 20 mm
            Plate thickness SS max. 15 mm
            Plate thickness Al. max. 10 mm
            Laser-Typ TLF 4000 -
            time resonator beam on 11374 Std.
            time laser stand by 26443 Std.
            Description :
            The machine is in good condition.


            Standard equipment:
            - HI-LAS high-pressure-cutting
            - Cutting head with 5"-Lense
            - Cutting head with 7,5"-Lense
            - Cutting head quick change device
            - metal sheet position detection system
            - programmable cutting-gas choice and pressure adjustment
            - Microweld
            - PMS Plasma Monitoring System
            - Sprint-Las
            - capacitive height regulation (DIAS III)

            - ContourLas
            - AutoLas Plus
            - autom. Pallet-changing
            - lit working chamber

            - small parts/waste conveyor
            - multi-chamber suction system
            - Compact dust extractor
            - automatic switch-off
            - Safety Light Barriers

            - ToPs 100 lite programming system
            - RJ 45 network connection
            - 3,5- Disk drive
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

          Broziat GmbH  Maschinen + Service  23554 Lübeck Vorwerker Str. 62a-64 Deutschland
          Broziat GmbH Maschinen + Service

          Vorwerker Str. 62a-64



          Contact Trader


            Broziat GmbH Maschinen + Service
           Vorwerker Str. 62a-64
            23554 Lübeck
            Deutschland
            +49 451 40 40 19
            +49 451 40 73 93
            info@Broziat.de
            https://broziat.com
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Laserschneidmaschine · Laserstanzpresse · Stanz- und Nibbelmaschine ·