European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          MS Maschinenhandel GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe CONTUR SJ-470


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28230 · Center Lathe

          CONTUR - SJ-470 - - -

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 470 mm︱- turning diameter (max) 235 mm︱- worpiece length max. 1000 mm︱BED GAP / BRIDGE ︱- swing in gap 690 mm︱MAIN SPINDLE ︱- spindle bore diameter 58 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 58 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱TAILSTOCK ︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
          << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>> The machine is available with peak widths from 760mm to 2000mm. This offer is a storage machine at a promotional price (Original price incl. These options: 28962.- ) We will send you a non-binding offer with your desired specifications. -> Description as well as standard and special equipment can be found in the PDF file. This storage machine is equipped as follows: Including the following standard accessories, u. a .: - 3-way precision spindle with SKF (FAG) bearings - Spindle brake mechanically - Complete electrical equipment - Coolant device with rear splash guard and splash guard on the slide - Food protection - Shift rod with 3 adjustable cams - Solid grain tip - Covered tension spindle - Set of machine mounting plates - Machine lamp 24 V - Operating instructions with test report - CE conformity declaration Incl. Special accessories, u. a .: Article no. 5200 B Steel holder head B, type Multifix (without tool holder) Article no. 6405 DA3A-470-1000 Digital Position Indicator ARBAH (Made in EU) 1 for SJ-470 / 1000S, including counter, 3 scales, Stands, covers and mounting Article no. 5300 3544-250-6 3 jaw lathe chucks BISON, steel body Ø 250 mm, Camlock D-6, concentric clamping, bore Ø 76 mm each with a set of one-piece turning and drilling jaws
            - swing diameter (max) 470 mm
            - turning diameter (max) 235 mm
            - worpiece length max. 1000 mm
            - swing in gap 690 mm
            - spindle bore diameter 58 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 58 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            Description :
            << Machine is in stock at 6500 Landeck / TIROL and can be viewed under power.>>
            The machine is available with peak widths from 760mm to 2000mm.
            This offer is a storage machine at a promotional price
            (Original price incl. These options: 28962.- )

            We will send you a non-binding offer with your desired specifications.
            -> Description as well as standard and special equipment can be found in the PDF file.

            This storage machine is equipped as follows:
            Including the following standard accessories, u. a .:
            - 3-way precision spindle with SKF (FAG) bearings
            - Spindle brake mechanically
            - Complete electrical equipment
            - Coolant device with rear splash guard
            and splash guard on the slide
            - Food protection
            - Shift rod with 3 adjustable cams
            - Solid grain tip
            - Covered tension spindle
            - Set of machine mounting plates
            - Machine lamp 24 V
            - Operating instructions with test report
            - CE conformity declaration

            Incl. Special accessories, u. a .:
            Article no. 5200 B
            Steel holder head B, type Multifix
            (without tool holder)

            Article no. 6405 DA3A-470-1000
            Digital Position Indicator ARBAH (Made in EU) 1
            for SJ-470 / 1000S, including counter, 3 scales,
            Stands, covers and mounting

            Article no. 5300 3544-250-6
            3 jaw lathe chucks BISON, steel body Ø 250 mm,
            Camlock D-6, concentric clamping, bore Ø 76 mm
            each with a set of one-piece turning and drilling jaws
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-520


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28231 · Center Lathe

          CONTUR - SJ-520 - - -

          Technical details
          WORKING RANGE TURNING / ︱- swing diameter (max) 520 mm︱- turning diameter (max) 260 mm︱- worpiece length max. 1500 mm︱MAIN SPINDLE ︱- spindle bore diameter 78 mm︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 2000 /min︱- number of gears 12 ︱- spindle diameter 78 mm︱SCREW CUTTING SPINDLE ︱- advance z-axis (min.) 0.05 mm/r︱- advance z-axis (max.) 0.82 mm/r︱- advance x-axis (min.) 0.02 mm/r︱- advance x-axis (max.) 0.4 mm/r︱- pitch of spindle 6 mm︱TAILSTOCK ︱- sleeve diameter 68 mm︱- taper: MK 4 ︱ELECTRICAL SPECIFICATIONS
            WORKING RANGE TURNING /
            - swing diameter (max) 520 mm
            - turning diameter (max) 260 mm
            - worpiece length max. 1500 mm
            - spindle bore diameter 78 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 2000 /min
            - number of gears 12
            - spindle diameter 78 mm
            - advance z-axis (min.) 0.05 mm/r
            - advance z-axis (max.) 0.82 mm/r
            - advance x-axis (min.) 0.02 mm/r
            - advance x-axis (max.) 0.4 mm/r
            - pitch of spindle 6 mm
            - sleeve diameter 68 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-760


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28885 · Center Lathe

          CONTUR - SJ-760 - - -

          Technical details
          turning diameter over bed 760 mm︱turning diameter over slide rest 540 mm︱turning length / mm︱ / 760 mm︱ 540 mm︱ 115 mm︱ 10 /min︱ 1000 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 760 mm
            turning diameter over slide rest 540 mm
            turning length / mm
            /
            760 mm
            540 mm
            115 mm
            10 /min
            1000 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-660


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28884 · Center Lathe

          CONTUR - SJ-660 - - -

          Technical details
          turning diameter over bed 660 mm︱turning diameter over slide rest 438 mm︱turning length / mm︱ 660 mm︱ 438 mm︱ 85 mm︱ 15 /min︱ 1500 /min︱ 12 11 kW︱ 0.05 mm/r︱ 0.82 mm/r︱ 0.02 mm/r︱ 0.4 mm/r︱ 32 85 mm︱
            turning diameter over bed 660 mm
            turning diameter over slide rest 438 mm
            turning length / mm
            660 mm
            438 mm
            85 mm
            15 /min
            1500 /min
            12
            11 kW
            0.05 mm/r
            0.82 mm/r
            0.02 mm/r
            0.4 mm/r
            32
            85 mm
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-430


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28229 · Center Lathe

          CONTUR - SJ-430 - - -

          Technical details
          turning diameter over bed 430 mm︱turning diameter over slide rest 215 mm︱turning length 760 mm︱ 430 mm︱ 215 mm︱ 58 mm︱ 20 /min︱ 2000 /min︱ 12 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 430 mm
            turning diameter over slide rest 215 mm
            turning length 760 mm
            430 mm
            215 mm
            58 mm
            20 /min
            2000 /min
            12
          Datasheet
          Request / Contact
          used  Center Lathe CONTUR SJ-410


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-21235 · Center Lathe

          CONTUR - SJ-410 - - -

          Technical details
          turning diameter over bed 410 mm︱turning diameter over slide rest / mm︱turning length 760 mm︱ 410 mm︱ 58 mm︱ 20 /min︱ 2000 /min︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter over bed 410 mm
            turning diameter over slide rest / mm
            turning length 760 mm
            410 mm
            58 mm
            20 /min
            2000 /min
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center INDEX ABC 65


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40948 · CNC Turning- and Milling Center

          INDEX - ABC 65 - - 2014 - /

          Technical details
          turning diameter 65 mm︱turning length / mm︱control / ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 65 mm︱- bar diameter (max) 65 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6000 /min︱- drive power 4.2 kW︱- spindle torque 10 Nm︱COUNTER SPINDLE ︱- spindle revolutions (max) 6000 /min︱- drive power S6 40% 20 kW︱- drive power S6 40% 27 kW︱- spindle torque S6 40% 105 Nm︱- spindle torque S1 100% 145 Nm︱
            turning diameter 65 mm
            turning length / mm
            control /
            - number of spindles 2
            - number of turrets 2
            - turning diameter (max) 65 mm
            - bar diameter (max) 65 mm
            - spindle revolutions (min) 6000 /min
            - drive power 4.2 kW
            - spindle torque 10 Nm
            - spindle revolutions (max) 6000 /min
            - drive power S6 40% 20 kW
            - drive power S6 40% 27 kW
            - spindle torque S6 40% 105 Nm
            - spindle torque S1 100% 145 Nm
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled MAWITEC TURNSTAR II


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-29616 · Lathe - cycle-controlled

          MAWITEC - TURNSTAR II - - 1998 - HEIDENHAIN MANUAL PLUS

          Technical details
          turning diameter 210 mm︱turning length 1000 mm︱control HEIDENHAIN MANUAL PLUS ︱-------------------------------------------------- ︱WORKING RANGE TURNING ︱- swing diameter (max) 410 mm︱- turning diameter (max) 210 mm︱- bar diameter (max) 42 mm︱- worpiece length max. 1000 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 3400 /min︱- number of gears 2 ︱TAILSTOCK ︱- sleeve stroke 190 mm︱- sleeve diameter 55 mm︱- taper: MK 4 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2400 mm︱- space requirements -front/back- 1600 mm︱
            turning diameter 210 mm
            turning length 1000 mm
            control HEIDENHAIN MANUAL PLUS
            - swing diameter (max) 410 mm
            - turning diameter (max) 210 mm
            - bar diameter (max) 42 mm
            - worpiece length max. 1000 mm
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 3400 /min
            - number of gears 2
            - sleeve stroke 190 mm
            - sleeve diameter 55 mm
            - space requirements -left/right. 2400 mm
            - space requirements -front/back. 1600 mm
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled VOEST ALPINE STEINEL W570


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-37918 · Lathe - cycle-controlled

          VOEST ALPINE STEINEL - W570 - - 1990 - ELESTA

          Technical details
          turning diameter 340 mm︱turning length 1000 mm︱control ELESTA ︱-------------------------------------------------- ︱WORKING RANGE TURNING ︱- swing diameter (max) 570 mm︱- turning diameter (max) 340 mm︱- worpiece length max. 1000 mm︱- workpiece weight max. 1000 kg︱MAIN SPINDLE ︱- spindle revolutions (min) 85 /min︱- spindle revolutions (max) 2500 /min︱X/Z SLIDE ︱- tool fixture: Steel Holder ︱TAILSTOCK ︱- sleeve stroke 160 mm︱- sleeve diameter 70 mm︱- taper: MK 5 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2700 mm︱
            turning diameter 340 mm
            turning length 1000 mm
            control ELESTA
            - swing diameter (max) 570 mm
            - turning diameter (max) 340 mm
            - worpiece length max. 1000 mm
            - workpiece weight max. 1000 kg
            - spindle revolutions (min) 85 /min
            - spindle revolutions (max) 2500 /min
            - sleeve stroke 160 mm
            - sleeve diameter 70 mm
            - space requirements -left/right. 2700 mm
          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled CONTUR DIALOG H-66


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-8360 · Lathe - cycle-controlled

          CONTUR - DIALOG H-66 - - - SIEMENS 840 D + SHOPTURN

          Technical details
          turning diameter 660 mm︱turning length / mm︱control SIEMENS 840 D + SHOPTURN 660 mm︱ 400 mm︱ 105 mm︱ 2 /min︱ 2500 /min︱ 2 18.8 kW︱ 21000 Nm︱ 5 mm/min︱ 3200 mm/min︱ 5 mm/min︱ 3200 mm/min︱ 8000 mm/min︱ 8000 mm/min︱
            turning diameter 660 mm
            turning length / mm
            control SIEMENS 840 D + SHOPTURN
            660 mm
            400 mm
            105 mm
            2 /min
            2500 /min
            2
            18.8 kW
            21000 Nm
            5 mm/min
            3200 mm/min
            5 mm/min
            3200 mm/min
            8000 mm/min
            8000 mm/min
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe STAR ECAS 32T


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38274 · Turning Automatic Lathe - swiss lathe

          STAR - ECAS 32T - - 2005 -

          Technical details
          turning diameter over bed / mm︱spindle passage 32 mm︱turning length / mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 2 ︱- spdl. indexing device: yes ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 3 ︱WORKING RANGE TURNING ︱- bar diameter (max) 32 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 7000 /min︱- drive power 5.5 kW︱- c-axis: yes ︱COUNTER SPINDLE ︱- spindle revolutions (max) 7000 /min︱
            turning diameter over bed / mm
            spindle passage 32 mm
            turning length / mm
            - number of spindles 2
            - number of turrets 2
            - number of c-axes 2
            - number of y-axes 3
            - bar diameter (max) 32 mm
            - spindle revolutions (max) 7000 /min
            - drive power 5.5 kW
            - spindle revolutions (max) 7000 /min
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe TRAUB TNK 36


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38209 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 36 - - 2002 -

          Technical details
          turning diameter over bed / mm︱spindle passage 36 mm︱turning length / mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- - counter spindle: yes ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 2 ︱WORKING RANGE TURNING ︱- bar diameter (max) 36 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6300 /min︱- drive power S6 40% 10.7 kW︱COUNTER SPINDLE ︱- spindle revolutions (max) 6300 /min︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱
            turning diameter over bed / mm
            spindle passage 36 mm
            turning length / mm
            - number of spindles 2
            - number of turrets 1
            - number of c-axes 2
            - number of y-axes 2
            - bar diameter (max) 36 mm
            - spindle revolutions (min) 6300 /min
            - drive power S6 40% 10.7 kW
            - spindle revolutions (max) 6300 /min
            - mains voltage 400 V
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe TRAUB TNK 28


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-38259 · Turning Automatic Lathe - swiss lathe

          TRAUB - TNK 28 - - 1999 -

          Technical details
          turning diameter over bed / mm︱spindle passage 28 mm︱turning length 3000 mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 28 mm︱- bar diameter (max) 28 mm︱- worpiece length max. 3000 mm︱MAIN SPINDLE ︱- c-axis: yes ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2600 mm︱- space requirements -front/back- 2400 mm︱- total height 1700 mm︱ATTACHMENTS (TURNING) ︱- - bar length (max) 3000 mm︱- - bar diameter (max) 28 mm︱
            turning diameter over bed / mm
            spindle passage 28 mm
            turning length 3000 mm
            - number of turrets 2
            - turning diameter (max) 28 mm
            - bar diameter (max) 28 mm
            - worpiece length max. 3000 mm
            - space requirements -left/right. 2600 mm
            - space requirements -front/back. 2400 mm
            - total height 1700 mm
            - - bar length (max) 3000 mm
            - - bar diameter (max) 28 mm
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column SCHIESS KE 125


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-39941 · Vertical Turret Lathe - Single Column

          SCHIESS - KE 125 - - 1958 -

          Technical details
          MAIN SPINDLE ︱- spindle revolutions (min) 4.8 /min︱- spindle revolutions (max) 237 /min︱FACING PLATE (TURNING MACHINE) ︱- diameter of surface plate 1250 mm︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2850 mm︱- space requirements -front/back- 2700 mm︱- total height 3100 mm︱- total weight approx. 16000 kg︱
            - spindle revolutions (min) 4.8 /min
            - spindle revolutions (max) 237 /min
            - diameter of surface plate 1250 mm
            - space requirements -left/right. 2850 mm
            - space requirements -front/back. 2700 mm
            - total height 3100 mm
            - total weight approx. 16000 kg
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column CKD BLANSKO SKJ 32/63


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-37932 · Vertical Turret Lathe - Single Column

          CKD BLANSKO - SKJ 32/63 - - -

          Technical details
          faceplate diameter 3200 mm︱swing diameter 6300 mm︱turning height / mm︱ 6300 mm︱ 2500 mm︱ 50000 kg︱ 0.8 /min︱ 80 /min︱ 92 kW︱ 130000 Nm︱ 3200 mm︱ 1900 mm︱ 1600 mm︱ 2200 mm︱
          This carousel lathe is completely overhauled, only the basic elements were used, everything else is NEW. The machine can be viewed under power and is in the state like a NEW machine
            faceplate diameter 3200 mm
            swing diameter 6300 mm
            turning height / mm
            6300 mm
            2500 mm
            50000 kg
            0.8 /min
            80 /min
            92 kW
            130000 Nm
            3200 mm
            1900 mm
            1600 mm
            2200 mm
            Description :
            This carousel lathe is completely overhauled, only the basic elements were used, everything else is NEW.
            The machine can be viewed under power and is in the state like a NEW machine
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal KIHEUNG TRT 1000


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-67 · Machining Center - Universal

          KIHEUNG - TRT 1000 - - 2011 - HEIDENHAIN iTNC 530

          Technical details
          x-travel 3000 mm︱y-travel 1250 mm︱z-travel 1850 mm︱workpiece weight 8 t︱table dimension - longitudinal 1600 mm︱table dimension - cross 1400 mm︱tool taper ISO SK-50 ︱spindle turning speed range 4000 U/min︱Control HEIDENHAIN iTNC 530 ︱table rotating 360 °︱feed stepless 6000 mm/min︱spindle 38 kW︱tool change unit 50 Positionen︱coolant IKZ / 20L/min. ︱total power requirement kW︱weight of the machine ca. 36 t︱dimensions of the machine ca. 7160 x 7690 x 4345 m︱
            x-travel 3000 mm
            y-travel 1250 mm
            z-travel 1850 mm
            workpiece weight 8 t
            table dimension - longitudinal 1600 mm
            table dimension - cross 1400 mm
            tool taper ISO SK-50
            spindle turning speed range 4000 U/min
            Control HEIDENHAIN iTNC 530
            table rotating 360 °
            feed stepless 6000 mm/min
            spindle 38 kW
            tool change unit 50 Positionen
            coolant IKZ / 20L/min.
            weight of the machine ca. 36 t
            dimensions of the machine ca. 7160 x 7690 x 4345 m
          Datasheet
          Request / Contact
          used  Machining Center - Universal TOS KURIM FSQ 100


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-39191 · Machining Center - Universal

          TOS KURIM - FSQ 100 - - 2001 - HEIDENHAIN TNC 426

          Technical details
          x travel 1600 mm︱y travel 1000 mm︱z travel 780 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 5 ︱- X-axis travel 1600 mm︱- Y-axis travel 1000 mm︱- Z-axis travel 780 mm︱TABLE ︱- table surface (left-right) 1000 mm︱- table surface (front-back) 1000 mm︱- workpiece load (max) 6000 kg︱- rotation axis: C ︱- - positioning/indexing 0.001 °︱MILLING SPINDLE / HEAD ︱- spindle type: tilting head ︱- - positioning/indexing 2.5 °︱- - positioning/indexing 2.5 °︱- spindle revolutions (max) 2500 /min︱
            x travel 1600 mm
            y travel 1000 mm
            z travel 780 mm
            - number of processing axes (exc. 5
            - X-axis travel 1600 mm
            - Y-axis travel 1000 mm
            - Z-axis travel 780 mm
            - table surface (left-right) 1000 mm
            - table surface (front-back) 1000 mm
            - workpiece load (max) 6000 kg
            - - positioning/indexing 0.001 °
            - - positioning/indexing 2.5 °
            - - positioning/indexing 2.5 °
            - spindle revolutions (max) 2500 /min
          Datasheet
          Request / Contact
          used  Machining Center - Universal DECKEL MAHO DMU 80T


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40677 · Machining Center - Universal

          DECKEL MAHO - DMU 80T - - 2000 -

          Technical details
          x travel 800 mm︱y travel 650 mm︱z travel 550 mm︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 3 ︱- X-axis travel 800 mm︱- Y-axis travel 650 mm︱- Z-axis travel 550 mm︱TABLE ︱- table surface (left-right) 1100 mm︱- table surface (front-back) 650 mm︱- workpiece load (max) 450 kg︱MILLING SPINDLE / HEAD ︱- spindle type: horizontal ︱- tool fixture: ISO SK 40 ︱- drive power 16 kW︱AXIS DRIVES ︱- feed velocity (min) 15000 mm/min︱TOOL MAGAZINE ︱- number of positions 25
            x travel 800 mm
            y travel 650 mm
            z travel 550 mm
            - number of processing axes (exc. 3
            - X-axis travel 800 mm
            - Y-axis travel 650 mm
            - Z-axis travel 550 mm
            - table surface (left-right) 1100 mm
            - table surface (front-back) 650 mm
            - workpiece load (max) 450 kg
            - drive power 16 kW
            - feed velocity (min) 15000 mm/min
            - number of positions 25
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical DMG DMC 1035 V ECO


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40767 · Machining Center - Vertical

          DMG - DMC 1035 V ECO - - 2012 - HEIDENHAIN TNCi 530

          Technical details
          x travel 1035 mm︱y travel 510 mm︱z travel 560 mm︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 3 ︱- .. among of them simultaneous CNC axes 3 ︱- X-axis travel 1035 mm︱- Y-axis travel 510 mm︱- Z-axis travel 560 mm︱TABLE ︱- table surface (left-right) 1200 mm︱- table surface (front-back) 560 mm︱MILLING SPINDLE / HEAD ︱- spindle revolutions (max) 10000 /min︱- tool fixture: ISO SK 40 ︱- drive power 13 kW︱AXIS DRIVES ︱- rapid traverse 30000 mm/min︱TOOL MAGAZINE ︱- number of positions 30
          no conveyor
            x travel 1035 mm
            y travel 510 mm
            z travel 560 mm
            - number of processing axes (exc. 3
            - .. among of them simultaneous . 3
            - X-axis travel 1035 mm
            - Y-axis travel 510 mm
            - Z-axis travel 560 mm
            - table surface (left-right) 1200 mm
            - table surface (front-back) 560 mm
            - spindle revolutions (max) 10000 /min
            - drive power 13 kW
            - rapid traverse 30000 mm/min
            - number of positions 30
            Description :
            no conveyor
          Datasheet
          Request / Contact
          used  Machining Center - Vertical MORI SEIKI SV 500B/40


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-18 · Machining Center - Vertical

          MORI SEIKI - SV 500B/40 - - 1998 - FANUC MSC 502

          Technical details
          x-travel 1000 mm︱y-travel 510 mm︱z-travel 510 mm︱Control FANUC MSC 502 ︱turning speeds 20000 U/min︱total power requirement kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. m︱
            x-travel 1000 mm
            y-travel 510 mm
            z-travel 510 mm
            Control FANUC MSC 502
            turning speeds 20000 U/min
            weight of the machine ca. 8 t
          Datasheet
          Request / Contact
          used  Machining Center - Vertical HITACHI SEIKI VK 45 II


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-66 · Machining Center - Vertical

          HITACHI SEIKI - VK 45 II - - 1997 - Seicos 10M

          Technical details
          x-travel 980 mm︱y-travel 500 mm︱z-travel 500 mm︱Control Seicos 10M ︱table dimension - longitudinal 1120 mm︱table dimension - cross 485 mm︱tool taper BT 40 ︱spindle turning speed range 8000 U/min︱tool change unit 30 -fach︱total power requirement kW︱weight of the machine ca. 6,5 t︱dimensions of the machine ca. 3150 x 2830 x 2500 m︱
            x-travel 980 mm
            y-travel 500 mm
            z-travel 500 mm
            Control Seicos 10M
            table dimension - longitudinal 1120 mm
            table dimension - cross 485 mm
            tool taper BT 40
            spindle turning speed range 8000 U/min
            tool change unit 30 -fach
            weight of the machine ca. 6,5 t
            dimensions of the machine ca. 3150 x 2830 x 2500 m
          Datasheet
          Request / Contact

          Portal - Machining Center

          used  Portal - Machining Center WALDRICH-COBURG MULTITEC 2500 AP


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-28 · Portal - Machining Center

          WALDRICH-COBURG - MULTITEC 2500 AP - - 2002 - SIEMENS 840 D

          Technical details
          x-axis 4000 mm︱y-axis 3500 mm︱z-axis 1500 mm︱Control SIEMENS 840 D ︱w-axis 1500 mm︱column daylight 2500 mm︱surface area 3000 x 2000 mm︱workpiece weight 10000 kg︱spindle turning speed range 5-6000 U/min︱transmission ratio 2 ︱power capacity - milling spindle 45 kW︱dist. cutter spindle - workpiece spindle 3500 mm︱max. torque on the spindle 1250 Nm︱tool change unit 200 -fach︱tool diameter 135 / 250 mm︱weight of tools max. 50 kg︱tool length - max. 400 mm︱tool taper ISO SK-50 ︱total power requirement kW︱
            x-axis 4000 mm
            y-axis 3500 mm
            z-axis 1500 mm
            Control SIEMENS 840 D
            w-axis 1500 mm
            column daylight 2500 mm
            surface area 3000 x 2000 mm
            workpiece weight 10000 kg
            spindle turning speed range 5-6000 U/min
            transmission ratio 2
            power capacity - milling spindle 45 kW
            dist. cutter spindle - workpiece. 3500 mm
            max. torque on the spindle 1250 Nm
            tool change unit 200 -fach
            tool diameter 135 / 250 mm
            weight of tools max. 50 kg
            tool length - max. 400 mm
            tool taper ISO SK-50
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine DONAU ALPHA


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40999 · Radial Drilling Machine

          DONAU - ALPHA - - 2006 -

          Technical details
          bore capacity in steel diameter 25 mm︱arm length / mm︱workpiece height max / mm︱WORKING RANGE -BORING- ︱- drilling capacity full bore (steel) 25 mm︱MILLING SPINDLE / HEAD ︱- spindle revolutions (min) 60 /min︱- spindle revolutions (max) 3050 /min︱
            bore capacity in steel diameter 25 mm
            arm length / mm
            workpiece height max / mm
            - drilling capacity full bore (s. 25 mm
            - spindle revolutions (min) 60 /min
            - spindle revolutions (max) 3050 /min
          Datasheet
          Request / Contact
          used  Radial Drilling Machine STANKO 2H55


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-40280 · Radial Drilling Machine

          STANKO - 2H55 - - 1973 -

          Technical details
          bore capacity in steel diameter 55 mm︱arm length 1600 mm︱workpiece height max 1600 mm︱WORKING RANGE -BORING- ︱- drilling capacity full bore (steel) 55 mm︱- throat (max) 1600 mm︱- workpiece height (max) 1600 mm︱MILLING SPINDLE / HEAD ︱- tool fixture: MK 5 ︱- sleeve stroke 350 mm︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 2700 mm︱- space requirements -front/back- 1100 mm︱- total height 3400 mm︱- total weight approx. 4500 kg︱
            bore capacity in steel diameter 55 mm
            arm length 1600 mm
            workpiece height max 1600 mm
            - drilling capacity full bore (s. 55 mm
            - throat (max) 1600 mm
            - workpiece height (max) 1600 mm
            - sleeve stroke 350 mm
            - space requirements -left/right. 2700 mm
            - space requirements -front/back. 1100 mm
            - total height 3400 mm
            - total weight approx. 4500 kg
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

            Trader Profile:   MS Maschinenhandel GmbH

          Contact Trader



            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 Ladis
            Österreich
            +43 (0) 5472 219 07">+43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
            info@ms-maschinen.at
            www.ms-maschinen.at

          Profile of Trader

          ProdEq Group - Partner of the Industry.
          Wholesale trading of metalworking machinery.
           
          We sell and buy:
          • machine tools
          • metal manufacturing machinery
          • used industrial equipment
          • complete plants
          Internationality:
          Our international sales network provides access to the global markets of used / secondhand machinery.


          Online Machinery Directory:
          Search and find your desired equipment and machine tool (CNC or non-CNC) in our online directory. All machines for sale are published with comprehensive information.

          Large projects - small projects:
          We realize auctions and liquidations and carry out the sales of your surplus equipment. Please contact us upon any upcoming sales of surplus assets. We trade single machines as well as complete industrial plants.

          Expertise:
          Regardlessly if you sell or buy used machines or equipment. Base your selling decision on our appraisal and your buying decision on our technical advice.

          More than secondhand:
          We also trade a selected portfolio of new equipment, just ask us.


          Trade and service:
          Ask for after sales services as disassembly, overhauls, transportation, import & export, and financing.

          Machinery & Equipment:


          ProdEq Trading GmbH
          Reckholder 1, 9527 Niederhelfenschwil, Switzerland


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ladis, Austria


          ProdEq Deutschland GmbH
          Weberweg 2, 42499 Hückeswagen, Germany


          Post-Venta Carreras S.A.
          Pol. Ind. Els Plans d'Arau, C/ Nicolau Copèrnic 2, 08787 La Pobla de Claramunt, Spain


          Guerrieri s.r.l.
          Piazza Giosuè Carducci 6, 21100 Varese (VA), Italy


          ProdEq d.o.o. Trgovina z industrijskimi stroji
          Opekarniska 4, 2327 Race, Slovenia


          Representative Office ProdEq Maschinenhandel GmbH
          16110 Nilüfer/Bursa, Türkei


          Other representative offices: Mexico, Iran
          Please contact one of the above ProdEq offices for more information.




          MS Maschinenhandel GmbH   6532 Ladis Unterdorf 34 Österreich
          MS Maschinenhandel GmbH

          Unterdorf 34



          Contact Trader


            MS Maschinenhandel GmbH
           Unterdorf 34
            6532 Ladis
            Österreich
            +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
            info@ms-maschinen.at
            www.ms-maschinen.at
            Contact person:

           




          Machine category


          Aufspannplatte · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · CNC Dreh- und Fräszentrum · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Feinstanzpresse · Flachschleifmaschine · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Honmaschine - Innen - Horizontal · Hydraulische - Abkantpresse · Hydraulische - Doppelständerziehpresse · Hydraulische - Tafelschere · Innenschleifmaschine · Karusselldrehmaschine - Einständer · Kompressor · Kompressor und Druckluftaufbereitung · Koordinatenmeßmaschine · Kühlmittelanlage · Langdrehautomat · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Meßmittel · Portal - Bearbeitungszentrum · Portalfräsmaschine · Radialbohrmaschine · Rundschleifmaschine - Universal · Schweißmaschinen · Stangenlader · Stanzautomat · Tafelschere - hydraulisch · Tischbohrwerk · Werkzeugwechselwagen ·