European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Matthias Ehlers Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe HURCO TM 8 i


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021024 · CNC Lathe

          HURCO - TM 8 i - - 2019 - MAX5 - Single

          Technical details
          turning diameter 256 mm︱control MAX5 - Single ︱turning diameter over bed 525 mm︱turning diameter over cross slideways 300 mm︱main spindle: ︱turning speed range - main spindle max. 4000 min/-1︱drive capacity - main spindle 23 kW︱max. torque 221 Nm︱chucking diameter 210 mm︱tool turret: ︱number of tool placed 12 Stück︱Drill shank diameter 32 mm︱travel: ︱x-axis 203 mm︱z-axis 550 mm︱feeds: ︱rapid traverse 30 x 30 m/min︱machine weight ab. 4050 kg︱dimensions of the machine ca. 4492 x 2729 x 2191 mmxmmxmm︱
          The machine can be viewed under power by appointment and is in our estimation in like new condition. technical features: - Hinge band - chip conveyor - Chips - Splash guard - Cabin - Part catcher (no unrestricted catching capacity) integrated into the machine - Tool calibration - coolant and air gun - three-jaw chuck - manual tailstock with programmable quill - Collet chuck Kitagawa QCRL60A6 / Collet Chuck D-185 E - Operating hours / spindle hours: <100 h Further data files on request. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 256 mm
            control MAX5 - Single
            turning diameter over bed 525 mm
            turning diameter over cross slid. 300 mm
            turning speed range - main spind. max. 4000 min/-1
            drive capacity - main spindle 23 kW
            max. torque 221 Nm
            chucking diameter 210 mm
            number of tool placed 12 Stück
            Drill shank diameter 32 mm
            x-axis 203 mm
            z-axis 550 mm
            rapid traverse 30 x 30 m/min
            machine weight ab. 4050 kg
            dimensions of the machine ca. 4492 x 2729 x 2191 mmxmmxmm
            Description :
            The machine can be viewed under power by appointment and
            is in our estimation in like new condition.

            technical features:

            - Hinge band - chip conveyor
            - Chips - Splash guard - Cabin
            - Part catcher (no unrestricted catching capacity) integrated into the machine
            - Tool calibration
            - coolant and air gun
            - three-jaw chuck
            - manual tailstock with programmable quill
            - Collet chuck Kitagawa QCRL60A6 / Collet Chuck D-185 E

            - Operating hours / spindle hours: <100 h

            Further data files on request.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Lathe TRAUB TNC 42/65 DGY


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021041 · CNC Lathe

          TRAUB - TNC 42/65 DGY - - 1999 - TRAUB System TX 8F

          Technical details
          turning diameter 65 / 175 mm︱turning length 450 mm︱control TRAUB System TX 8F ︱turning speeds 5600 U/min︱number of tool places 2 x 10 Pos.︱tool taper VDI 30 ︱number of controlled axis 8 (+ 2 x C-Achse +Y) ︱Number of working hours ca. 39000 h︱total power requirement 39 kW︱weight of the machine ca. 5,6 t︱dimensions of the machine ca. 2,6 x 2,0 x 1,8 m︱
            turning diameter 65 / 175 mm
            turning length 450 mm
            control TRAUB System TX 8F
            turning speeds 5600 U/min
            number of tool places 2 x 10 Pos.
            tool taper VDI 30
            number of controlled axis 8 (+ 2 x C-Achse +Y)
            Number of working hours ca. 39000 h
            total power requirement 39 kW
            weight of the machine ca. 5,6 t
            dimensions of the machine ca. 2,6 x 2,0 x 1,8 m
          Datasheet
          Request / Contact
          used  CNC Lathe WASINO LJ 103 M


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021047 · CNC Lathe

          WASINO - LJ 103 M - - 1989 - Fanuc 10 TF

          Technical details
          turning diameter Ø 220 mm︱turning length 1000 mm︱control Fanuc 10 TF ︱turning diameter over bed Ø 430 mm︱main spindle: ︱turning speed range - main spindle 10 - 1060 / 35 - 3500 min/-1︱spindle bore Ø 77 mm︱chucking diameter Ø 250 mm︱tool turret: ︱number of tool places 12 Pos.︱Drill shank diameter max. 50 mm︱travel: ︱x-axis 245 mm︱y-axis 1020 mm︱tail stock: ︱riding stick track 100 mm︱diameter of quill Ø 80 mm︱tailstock taper MK 5 ︱weight of the machine ca. 5,3 t︱dimensions of the machine ca. 4,1 x 2,0 x 2,0 m︱
          This machine can be viewed under power by appointment and is in our estimation in a technically good condition. technical features: - driven tools Equipment: - large accessories package (pictures on request) *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            turning diameter Ø 220 mm
            turning length 1000 mm
            control Fanuc 10 TF
            turning diameter over bed Ø 430 mm
            turning speed range - main spind. 10 - 1060 / 35 - 3500 min/-1
            spindle bore Ø 77 mm
            chucking diameter Ø 250 mm
            number of tool places 12 Pos.
            Drill shank diameter max. 50 mm
            x-axis 245 mm
            y-axis 1020 mm
            riding stick track 100 mm
            diameter of quill Ø 80 mm
            tailstock taper MK 5
            weight of the machine ca. 5,3 t
            dimensions of the machine ca. 4,1 x 2,0 x 2,0 m
            Description :
            This machine can be viewed under power by appointment and
            is in our estimation in a technically good condition.

            technical features:
            - driven tools

            Equipment:
            - large accessories package (pictures on request)

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center MORI SEIKI NL 2500 SY / 700


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021028 · CNC Turning- and Milling Center

          MORI SEIKI - NL 2500 SY / 700 - - 2008 - MAPPS III

          Technical details
          turning diameter 366 mm︱turning length 705 mm︱Control MAPPS III ︱main spindle: ︱max. turning speeds 4000 min/-1︱max. rod diameter 80 mm︱tool turret: ︱tool taper BMT ︱number of tool places 12 Pos.︱turning speed range - driven tools 6000 kW︱x-axis 260 mm︱y-axis 795 mm︱z-axis 100 +/- 50 mm︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. 3,2 x 2,0 x 2,2 m︱
          In our estimation, the machine is in very good condition and can be viewed live by appointment. technical features: - with tool drive - C-, Y-axis and counter spindle - Collet chuck main spindle - Chuck counter spindle - Part catcher - Loading magazine 3m Equipment: - Bar feeder interface - incl. high pressure system 50 bar - including documentation (if available) *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 366 mm
            turning length 705 mm
            Control MAPPS III
            max. turning speeds 4000 min/-1
            max. rod diameter 80 mm
            tool taper BMT
            number of tool places 12 Pos.
            turning speed range - driven too. 6000 kW
            x-axis 260 mm
            y-axis 795 mm
            z-axis 100 +/- 50 mm
            weight of the machine ca. 6,2 t
            dimensions of the machine ca. 3,2 x 2,0 x 2,2 m
            Description :
            In our estimation, the machine is in very good condition
            and can be viewed live by appointment.

            technical features:
            - with tool drive
            - C-, Y-axis and counter spindle
            - Collet chuck main spindle
            - Chuck counter spindle
            - Part catcher
            - Loading magazine 3m

            Equipment:
            - Bar feeder interface
            - incl. high pressure system 50 bar
            - including documentation (if available)

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK SQT 300 MY


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021051 · CNC Turning- and Milling Center

          MAZAK - SQT 300 MY - - 2008 - Mazatrol 640 T Fusion

          Technical details
          turning diameter 420 mm︱turning length 1017 mm︱control Mazatrol 640 T Fusion ︱main spindle: ︱max. turning speeds 4000 min/-1︱chucking diameter 315 mm︱max. rod diameter 104 mm︱tool turret: ︱number of turret 1 Pos.︱number of tool places 12 Pos.︱x-travel 260 mm︱y-travel 150 mm︱z-travel 1030 mm︱
          In our estimation, the machine is in very good condition and can be viewed live by appointment. technical features: - y - axis - tailstock - chip conveyor *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 420 mm
            turning length 1017 mm
            control Mazatrol 640 T Fusion
            max. turning speeds 4000 min/-1
            chucking diameter 315 mm
            max. rod diameter 104 mm
            number of turret 1 Pos.
            number of tool places 12 Pos.
            x-travel 260 mm
            y-travel 150 mm
            z-travel 1030 mm
            Description :
            In our estimation, the machine is in very good condition
            and can be viewed live by appointment.

            technical features:
            - y - axis
            - tailstock
            - chip conveyor

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MORI SEIKI NL 2500 SY / 700


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021027 · CNC Turning- and Milling Center

          MORI SEIKI - NL 2500 SY / 700 - - 2007 - MAPPS III

          Technical details
          turning diameter 366 mm︱turning length 705 mm︱Control MAPPS III ︱main spindle: ︱turning speed range - main spindle 4000 min/-1︱max. rod diameter 80 mm︱tool turret: ︱number of tool places 12 Pos.︱tool taper BMT ︱turning speed range - driven tools 6000 kW︱travel: ︱x-axis 260 mm︱y-axis 795 mm︱z-axis 100 +/- 50 mm︱weight of the machine ca. 6,2 t︱dimensions of the machine ca. 3,2 x 2,0 x 2,2 m︱
          In our estimation, the machine is in very good condition and can be viewed live by appointment. technical features: - with tool drive - C-, Y-axis and counter spindle - Collet chuck main spindle - Chuck counter spindle - Part catcher - Loading magazine 3m Equipment: - Bar feeder interface - incl. high pressure system 50 bar - including documentation (if available) *** Changes and errors in the technical data and information as well Subject to prior sale!***
            turning diameter 366 mm
            turning length 705 mm
            Control MAPPS III
            turning speed range - main spind. 4000 min/-1
            max. rod diameter 80 mm
            number of tool places 12 Pos.
            tool taper BMT
            turning speed range - driven too. 6000 kW
            x-axis 260 mm
            y-axis 795 mm
            z-axis 100 +/- 50 mm
            weight of the machine ca. 6,2 t
            dimensions of the machine ca. 3,2 x 2,0 x 2,2 m
            Description :
            In our estimation, the machine is in very good condition
            and can be viewed live by appointment.

            technical features:
            - with tool drive
            - C-, Y-axis and counter spindle
            - Collet chuck main spindle
            - Chuck counter spindle
            - Part catcher
            - Loading magazine 3m

            Equipment:
            - Bar feeder interface
            - incl. high pressure system 50 bar
            - including documentation (if available)

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Facing Lathe

          used  Facing Lathe SEIGER LC RECORD 2200


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606034 · Facing Lathe

          SEIGER - LC RECORD 2200 - - 2009 -

          Technical details
          weight of the machine ca. 21 t︱required space 8x4,2x3,2 m︱total power requirement 20 kW︱turning diameter over slide rest mm︱
            weight of the machine ca. 21 t
            required space 8x4,2x3,2 m
            total power requirement 20 kW
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal STARRAG HECKERT HEC  400 D


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606038 · Machining Center - Horizontal

          STARRAG HECKERT - HEC 400 D - - 2015 - Siemens 840 D

          Technical details
          x-travel 650 mm︱y-travel 650 mm︱z-travel 680 mm︱spindle motor 24/31 kW︱Control Siemens 840 D ︱Number of working hours 37124 h︱spindle hours 15315 h︱main spindle: ︱Number of boring spindles 1 St.︱turning speed range - main spindle 50 - 10000 min/-1︱Drive power - main spindle 24/37 kW︱max. torque 230/350 Nm︱spindle bearing diameter 70 mm︱no. of tables 2 ︱round table 400 x 500 mm︱tool magazin: ︱tool taper HSK 63 ︱number of tool places 60 Pos.︱max. tool diameter 80/160 mm︱max. tool length 350 mm︱
          The machine can be viewed under power by appointment and is in our estimation in a very good condition. Equipment: - Power package - Clamping hydraulics 6 channels - IKZ up to 80 bar - Visa port - Renishaw OMP 60 probe - Tool breakage control - autom. Doors - pallet changer - KNOLL KF 400/1750 belt filter system - KNOLL 450 K-1 chip chain conveyor *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-travel 650 mm
            y-travel 650 mm
            z-travel 680 mm
            spindle motor 24/31 kW
            Control Siemens 840 D
            Number of working hours 37124 h
            spindle hours 15315 h
            Number of boring spindles 1 St.
            turning speed range - main spind. 50 - 10000 min/-1
            Drive power - main spindle 24/37 kW
            max. torque 230/350 Nm
            spindle bearing diameter 70 mm
            no. of tables 2
            round table 400 x 500 mm
            tool taper HSK 63
            number of tool places 60 Pos.
            max. tool diameter 80/160 mm
            max. tool length 350 mm
            Description :

            The machine can be viewed under power by appointment and
            is in our estimation in a very good condition.

            Equipment:
            - Power package
            - Clamping hydraulics 6 channels
            - IKZ up to 80 bar
            - Visa port
            - Renishaw OMP 60 probe
            - Tool breakage control
            - autom. Doors
            - pallet changer
            - KNOLL KF 400/1750 belt filter system
            - KNOLL 450 K-1 chip chain conveyor

            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal AVEREX HS 450 i


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606026 · Machining Center - Horizontal

          AVEREX - HS 450 i - - 2011 -

          Technical details
          x-travel 640 mm︱y-travel 610 mm︱z-travel 680 mm︱spindle taper: BT Big Plus 40︱size of pallet 400x400 mm︱rapid travel range 60.000 m/min︱workpiece weight max. 500 kg︱spindle turning speed range 40-15000 U/min︱total power requirement 15 kW︱weight of the machine ca. 11,7 t︱required space 5,4x3,9x2,6 m︱
          The machine can still be viewed under power and, according to our assessment, is in a technically excellent condition! The tools and clamping devices are not included in the scope of delivery. The machine is equipped with: IKZ 3-D probe B-axis Degree of indexation 0.001 ° Chip conveyor Tool changer, 80 places *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            x-travel 640 mm
            y-travel 610 mm
            z-travel 680 mm
            spindle taper: BT Big Plus 40
            size of pallet 400x400 mm
            rapid travel range 60.000 m/min
            workpiece weight max. 500 kg
            spindle turning speed range 40-15000 U/min
            total power requirement 15 kW
            weight of the machine ca. 11,7 t
            required space 5,4x3,9x2,6 m
            Description :
            The machine can still be viewed under power and, according to our assessment, is in a technically excellent condition!

            The tools and clamping devices are not included in the scope of delivery.

            The machine is equipped with:
            IKZ
            3-D probe
            B-axis
            Degree of indexation 0.001 °
            Chip conveyor
            Tool changer, 80 places

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal MAZAK FH 5800


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021042 · Machining Center - Horizontal

          MAZAK - FH 5800 - - 2000 - Mazatrol PC-Fusion 640 M

          Technical details
          x-travel 710 mm︱y-travel 610 mm︱z-travel 660 mm︱Control Mazatrol PC-Fusion 640 M ︱main spindle: ︱turning speed range - main spindle 35 - 12000 min/-1︱drive capacity - main spindle 22 kW︱max. torque 303 Nm︱table: ︱table surface area 500 x 500 mm︱max. workpiece height Ø 730 x H 710 mm︱max. workpiece weight 500 kg︱swivelling range 360 x 1 Grad︱tool magazin: ︱number of tool places Pos.︱tool taper SK 40 ︱max. tool diameter 95 mm︱max. tool weight 12 kg︱change-time chip to chip ca. 3,7 sec︱feeds:
          In our estimation, the machine is in very good condition and can be viewed live by appointment. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 710 mm
            y-travel 610 mm
            z-travel 660 mm
            Control Mazatrol PC-Fusion 640 M
            turning speed range - main spind. 35 - 12000 min/-1
            drive capacity - main spindle 22 kW
            max. torque 303 Nm
            table surface area 500 x 500 mm
            max. workpiece height Ø 730 x H 710 mm
            max. workpiece weight 500 kg
            swivelling range 360 x 1 Grad
            tool taper SK 40
            max. tool diameter 95 mm
            max. tool weight 12 kg
            change-time chip to chip ca. 3,7 sec
            Description :
            In our estimation, the machine is in very good condition
            and can be viewed live by appointment.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal MATSUURA MAM-500H


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021034 · Machining Center - Horizontal

          MATSUURA - MAM-500H - - 1996 - Yasnac

          Technical details
          x-travel 500 mm︱y-travel 470 mm︱z-travel 450 mm︱control Yasnac ︱main spindle: ︱turning speed range - main spindle 30 - 8000 min/-1︱max. torque 146 (360 U/min) Nm︱spindle bearing diameter 70 mm︱tool magazin: ︱Number of tools 120 St.︱tool taper BT40 JIS6339 ︱max. tool diameter 80 mm︱max. tool length 350 mm︱max. tool weight 10 kg︱change-time tool to tool 1,3 sec︱palettenwechsler: ︱number 2 ︱type of pallet-changer Wechsel über Drehtisch ︱change time of pallets 6,0 sec︱clamping capacity max. 41,5 kN︱
          In our assessment, the machine is in a very good condition State and can be viewed live on site by appointment become. *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-travel 500 mm
            y-travel 470 mm
            z-travel 450 mm
            control Yasnac
            turning speed range - main spind. 30 - 8000 min/-1
            max. torque 146 (360 U/min) Nm
            spindle bearing diameter 70 mm
            Number of tools 120 St.
            tool taper BT40 JIS6339
            max. tool diameter 80 mm
            max. tool length 350 mm
            max. tool weight 10 kg
            change-time tool to tool 1,3 sec
            number 2
            type of pallet-changer Wechsel über Drehtisch
            change time of pallets 6,0 sec
            clamping capacity max. 41,5 kN
            Description :
            In our assessment, the machine is in a very good condition
            State and can be viewed live on site by appointment
            become.

            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal DMG Deckel Maho DMU 60 FD duoBLOCK


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020017 · Machining Center - Universal

          DMG Deckel Maho - DMU 60 FD duoBLOCK - - 2010 - Siemens 840D solutionline

          Technical details
          x-travel 600 mm︱y-travel 700 mm︱z-travel 600 mm︱Control Siemens 840D solutionline ︱main spindle: ︱turning speed range - main spindle 12000 min/-1︱capacity main spindle 19 kW︱max. torque 82 Nm︱spindle hours 18000 h︱tool taper HSK 63 ︱tool changer: 60 fach ︱rotary table: ︱table surface area Ø 630 mm︱max. table load 600 kg︱rapid travel x/y/z 60 mm/min︱Number of working hours 29000 h︱feed speeds 0-60000 mm/min︱rapid traverse 60 m/min︱input unit 0,001 mm︱
          The machine can be visited by appointment. Milling and turning in one clamping with Direct Drive table and speeds up to 1200 1 / min The machine is in very good condition. *** Changes and errors in the technical data and specifications as well Subject to prior sale!***
            x-travel 600 mm
            y-travel 700 mm
            z-travel 600 mm
            Control Siemens 840D solutionline
            turning speed range - main spind. 12000 min/-1
            capacity main spindle 19 kW
            max. torque 82 Nm
            spindle hours 18000 h
            tool taper HSK 63
            tool changer: 60 fach
            table surface area Ø 630 mm
            max. table load 600 kg
            rapid travel x/y/z 60 mm/min
            Number of working hours 29000 h
            feed speeds 0-60000 mm/min
            rapid traverse 60 m/min
            input unit 0,001 mm
            Description :
            The machine can be visited by appointment.

            Milling and turning in one clamping with Direct Drive table and speeds
            up to 1200 1 / min

            The machine is in very good condition.


            *** Changes and errors in the technical data and specifications as well
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical HURCO VM 10 i


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021014 · Machining Center - Vertical

          HURCO - VM 10 i - - 2019 - Max 5

          Technical details
          x-travel 660 mm︱y-travel 406 mm︱z-travel 508 mm︱control Max 5 ︱distance spindle /table 102 - 610 mm︱main spindle: ︱max. turning speeds 12000 min/-1︱drive capacity - main spindle 11 kW︱work table: ︱table surface area 762 x 406 mm︱max. table load 1500 kg︱T-slots 3 x 18 H8 x 100 ︱tool changer: ︱tool taper SK 40 ︱number of tool places 20 Pos.︱max. tool diameter 89 mm︱max. tool length 250 mm︱max. tool weight 7 kg︱feeds: ︱rapid traverse 28/28/28 m/min︱
          The machine can be viewed under power by appointment and is in our estimation in like new condition. technical features: - MAX5 control with removable electronic handwheel - spindle cooler - Chip auger - Chips - Splash guard - Cabin - Operating hours / spindle hours: <100 h Further data files on request. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 660 mm
            y-travel 406 mm
            z-travel 508 mm
            control Max 5
            distance spindle /table 102 - 610 mm
            max. turning speeds 12000 min/-1
            drive capacity - main spindle 11 kW
            table surface area 762 x 406 mm
            max. table load 1500 kg
            T-slots 3 x 18 H8 x 100
            tool taper SK 40
            number of tool places 20 Pos.
            max. tool diameter 89 mm
            max. tool length 250 mm
            max. tool weight 7 kg
            rapid traverse 28/28/28 m/min
            Description :
            The machine can be viewed under power by appointment and
            is in our estimation in like new condition.

            technical features:

            - MAX5 control with removable electronic handwheel
            - spindle cooler
            - Chip auger
            - Chips - Splash guard - Cabin

            - Operating hours / spindle hours: <100 h

            Further data files on request.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical KUNZMANN WF 650


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021050 · Machining Center - Vertical

          KUNZMANN - WF 650 - - 2007 - Heidenhain iTNC 530

          Technical details
          x-travel 650 mm︱y-travel 500 mm︱z-travel 450 mm︱Control Heidenhain iTNC 530 ︱main spindle: ︱max. turning speeds 6.500 min/-1︱drive capacity - main spindle 10/19 kW︱work table: ︱table surface area 1100 x 600 mm︱max. table load 450 kg︱T-slots 8 x 14 (H7) ︱tool changer: ︱tool taper SK 40 ︱number of tool places 38 Pos.︱change-time tool to tool ca. 10 sec︱change-time chip to chip ca. 5 sec︱feeds: ︱feed range bis zu 25 m/min︱weight of the machine ca. 5,5 t︱
          The machine can be viewed under power by appointment and is in our estimation in very good condition. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 650 mm
            y-travel 500 mm
            z-travel 450 mm
            Control Heidenhain iTNC 530
            max. turning speeds 6.500 min/-1
            drive capacity - main spindle 10/19 kW
            table surface area 1100 x 600 mm
            max. table load 450 kg
            T-slots 8 x 14 (H7)
            tool taper SK 40
            number of tool places 38 Pos.
            change-time tool to tool ca. 10 sec
            change-time chip to chip ca. 5 sec
            feed range bis zu 25 m/min
            weight of the machine ca. 5,5 t
            Description :
            The machine can be viewed under power by appointment and
            is in our estimation in very good condition.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical CHIRON Mill 800 high speed five axis


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021016 · Machining Center - Vertical

          CHIRON - Mill 800 high speed five axis - - 2006 - Siemens 840 D

          Technical details
          x-travel 800 mm︱y-travel 500 mm︱z-travel 550 mm︱control Siemens 840 D ︱main spindle: ︱turning speed range - main spindle 12000 min/-1︱drive capacity - main spindle 22,5 kW︱rotary table: 2 x 280 ︱table surface area 1400 x 550 mm︱tool taper HSK - A 63 ︱number of tool places 162 Pos.︱rapid traverse 60 m/min︱weight of the machine ca. 8,2 t︱
            x-travel 800 mm
            y-travel 500 mm
            z-travel 550 mm
            control Siemens 840 D
            turning speed range - main spind. 12000 min/-1
            drive capacity - main spindle 22,5 kW
            rotary table: 2 x 280
            table surface area 1400 x 550 mm
            tool taper HSK - A 63
            number of tool places 162 Pos.
            rapid traverse 60 m/min
            weight of the machine ca. 8,2 t
          Datasheet
          Request / Contact
          used  Machining Center - Vertical KITAMURA Mycenter 3 XiF


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020061 · Machining Center - Vertical

          KITAMURA - Mycenter 3 XiF - - 2006 - Fanuc Series 16i-MB

          Technical details
          x-travel 760 mm︱y-travel 460 mm︱z-travel 455 mm︱control Fanuc Series 16i-MB ︱Speed 20000 U/min.︱tool taper BT 40 ︱tool changing time 3,2 sec︱workpiece dia. 80 mm︱workpiece weight 8 kg︱Number of tools 30 St.︱table-size 860 x 410 mm︱no. of tables 2 ︱max. table load 200 kg︱Feedrate X-,Y-,Z,- axis 0 - 15000 mm/min︱rapid traverse X-axis 30000 m/min︱ 30000 m/min︱rapid traverse Z-axis 24000 m/min︱total power requirement 25 kVA︱weight of the machine ca. 9 t︱dimensions of the machine ca. 3,1 x 0,65 x 1,75 m︱
          The machine can be viewed under power by appointment. Scope of delivery: - IKZ - 2-way pallet changer - chip conveyor *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 760 mm
            y-travel 460 mm
            z-travel 455 mm
            control Fanuc Series 16i-MB
            Speed 20000 U/min.
            tool taper BT 40
            tool changing time 3,2 sec
            workpiece dia. 80 mm
            workpiece weight 8 kg
            Number of tools 30 St.
            table-size 860 x 410 mm
            no. of tables 2
            max. table load 200 kg
            Feedrate X-,Y-,Z,- axis 0 - 15000 mm/min
            rapid traverse X-axis 30000 m/min
            30000 m/min
            rapid traverse Z-axis 24000 m/min
            total power requirement 25 kVA
            weight of the machine ca. 9 t
            dimensions of the machine ca. 3,1 x 0,65 x 1,75 m
            Description :
            The machine can be viewed under power by appointment.

            Scope of delivery:
            - IKZ
            - 2-way pallet changer
            - chip conveyor

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical HURCO VM 1


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021046 · Machining Center - Vertical

          HURCO - VM 1 - - 2006 - Ultimax

          Technical details
          x-travel 660 mm︱y-travel 355 mm︱z-travel 450 mm︱Control Ultimax ︱main spindle: ︱max. turning speeds 10.000 min/-1︱work table: ︱max. table load 350 kg︱tool changer: ︱tool taper SK 40 DIN 69871 ︱number of tool places 20 Pos.︱weight of the machine ca. 2,7 t︱dimensions of the machine ca. 1,8 x 1,9 x 2,6 m︱
          The machine can be viewed under power by appointment and is in our estimation in a like new condition. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 660 mm
            y-travel 355 mm
            z-travel 450 mm
            Control Ultimax
            max. turning speeds 10.000 min/-1
            max. table load 350 kg
            tool taper SK 40 DIN 69871
            number of tool places 20 Pos.
            weight of the machine ca. 2,7 t
            dimensions of the machine ca. 1,8 x 1,9 x 2,6 m
            Description :
            The machine can be viewed under power by appointment and
            is in our estimation in a like new condition.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical HURCO VMX 30 mit 4/ 5 Achse


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020070 · Machining Center - Vertical

          HURCO - VMX 30 mit 4/ 5 Achse - - 2006 - Ultimax 4

          Technical details
          x-travel 760 mm︱y-travel 510 mm︱z-travel 610 mm︱control Ultimax 4 ︱main spindle: ︱max. turning speeds 10000 min/-1︱torque 210 Nm︱tool taper SK40Kitagawa TT 181 ︱faceplate diameter 180 mm︱centre height 180 mm︱spindle passage 40 mm︱tool turret: ︱number of tool places 24 Pos.︱Rapid traverse: X -Y-Z axis 30/ 30/ 20 m/min︱ 1000 kg︱
          The machine can be viewed under power by appointment. Equipment: - chip conveyor - IKZ with filter, 20 bar - Network, DXF software - Electronic handwheel - signal light - 4./5. Kitagawa axle, type: TT182BY-6 Further information: - Rotary union renewed - Tracking ball renewed - X-axis bearing renewed (09/2018) - spindle renewed (2017) - various laser measurements carried out (protocols available) - Comprehensive documentation / maintenance reports available The machine is in very good condition. *** Changes and errors in the technical data and information as well Subject to prior sale! ***
            x-travel 760 mm
            y-travel 510 mm
            z-travel 610 mm
            control Ultimax 4
            max. turning speeds 10000 min/-1
            torque 210 Nm
            tool taper SK40
            Kitagawa TT 181
            faceplate diameter 180 mm
            centre height 180 mm
            spindle passage 40 mm
            number of tool places 24 Pos.
            Rapid traverse: X -Y-Z axis 30/ 30/ 20 m/min
            1000 kg
            Description :
            The machine can be viewed under power by appointment.

            Equipment:
            - chip conveyor
            - IKZ with filter, 20 bar
            - Network, DXF software
            - Electronic handwheel
            - signal light
            - 4./5. Kitagawa axle, type: TT182BY-6

            Further information:
            - Rotary union renewed
            - Tracking ball renewed
            - X-axis bearing renewed (09/2018)
            - spindle renewed (2017)
            - various laser measurements carried out (protocols available)
            - Comprehensive documentation / maintenance reports available

            The machine is in very good condition.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical AXA VSC 3 - S / 50 / E


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-606030 · Machining Center - Vertical

          AXA - VSC 3 - S / 50 / E - - 2006 -

          Technical details
          x-travel 5000 mm︱y-travel 900 mm︱z-travel 900 mm︱autom. controllable turning speeds 60-6.000 U/min U/min︱spindle taper 50 SK︱total power requirement 45 kW︱weight of the machine ca. 25 t︱required space 8,9m x 3,5m x 3,6m m︱
            x-travel 5000 mm
            y-travel 900 mm
            z-travel 900 mm
            autom. controllable turning spee. 60-6.000 U/min U/min
            spindle taper 50 SK
            total power requirement 45 kW
            weight of the machine ca. 25 t
            required space 8,9m x 3,5m x 3,6m m
          Datasheet
          Request / Contact
          used  Machining Center - Vertical HEDELIUS BC 100


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021048 · Machining Center - Vertical

          HEDELIUS - BC 100 - - 2004 - Heidenhain 530

          Technical details
          x-travel 2500 mm︱y-travel 1000 mm︱z-travel 770 mm︱Control Heidenhain 530 ︱main spindle: ︱max. turning speeds 6.000 min/-1︱work table: ︱table surface area 3.220 x 1000 mm︱max. table load 3.500 kg︱T-slots 22 mm︱tool changer: ︱tool taper SK50 ︱max. tool diameter 100/125 mm︱max. tool length 330 mm︱change-time chip to chip 9,5 - 13,5 sec︱feeds: ︱rapid traverse 30/30/30 m/min︱feed force 15.000 N︱weight of the machine ca. 21 t︱
          The machine can be viewed under power by appointment and is in our estimation in very good condition. technical features: - internal cooling Equipment: - chip conveyor *** Changes and errors in the technical data and information, as well Subject to prior sale! ***
            x-travel 2500 mm
            y-travel 1000 mm
            z-travel 770 mm
            Control Heidenhain 530
            max. turning speeds 6.000 min/-1
            table surface area 3.220 x 1000 mm
            max. table load 3.500 kg
            T-slots 22 mm
            tool taper SK50
            max. tool diameter 100/125 mm
            max. tool length 330 mm
            change-time chip to chip 9,5 - 13,5 sec
            rapid traverse 30/30/30 m/min
            feed force 15.000 N
            weight of the machine ca. 21 t
            Description :
            The machine can be viewed under power by appointment and
            is in our estimation in very good condition.

            technical features:
            - internal cooling

            Equipment:
            - chip conveyor

            *** Changes and errors in the technical data and information, as well
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical Mazak VTC 30 C


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020093 · Machining Center - Vertical

          Mazak - VTC 30 C - - 1999 - Mazatrol M Plus

          Technical details
          x-travel 1660 mm︱y-travel 760 mm︱z-travel 660 mm︱control Mazatrol M Plus︱speeds 40 - 7000 U/min︱drive capacity - main spindle 11 kW︱table surface area 760x2000 mm︱number of tool places 24 Pos.︱tool taper SK 40︱total power requirement 32,8 kVA︱weight of the machine ca. 8,1 t︱dimensions of the machine ca. 6,0x4,0x3,5 m︱
          n our estimation, the machine is in good condition. The machine has no internal cooling through the spindle and no chip conveyor. *** Changes and errors in the technical data and information Subject to prior sale! ***
            x-travel 1660 mm
            y-travel 760 mm
            z-travel 660 mm
            control Mazatrol M Plus
            speeds 40 - 7000 U/min
            drive capacity - main spindle 11 kW
            table surface area 760x2000 mm
            number of tool places 24 Pos.
            tool taper SK 40
            total power requirement 32,8 kVA
            weight of the machine ca. 8,1 t
            dimensions of the machine ca. 6,0x4,0x3,5 m
            Description :
            n our estimation, the machine is in good condition.

            The machine has no internal cooling through the spindle and no chip conveyor.

            *** Changes and errors in the technical data and information
            Subject to prior sale! ***
          Datasheet
          Request / Contact
          used  Machining Center - Vertical OKUMA MC 5 VA


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021010 · Machining Center - Vertical

          OKUMA - MC 5 VA - - 1990 - OSP 5020

          Technical details
          x-travel 1050 mm︱y-travel 510 mm︱z-travel 6501 mm︱Control OSP 5020 ︱spindle tunring speed 4000 U/min︱table-size 1550 x 650 mm︱Number of working hours 15770 h︱spindle cone 50 ISO ︱number of tool places 20 Pos.︱tool taper BT 50
          The machine is in very good condition and can be viewed under power after appointment. *** Changes and errors in the technical data and information as well Subject to prior sale!***
            x-travel 1050 mm
            y-travel 510 mm
            z-travel 6501 mm
            Control OSP 5020
            spindle tunring speed 4000 U/min
            table-size 1550 x 650 mm
            Number of working hours 15770 h
            spindle cone 50 ISO
            number of tool places 20 Pos.
            tool taper BT 50
            Description :
            The machine is in very good condition and can be viewed under power after
            appointment.

            *** Changes and errors in the technical data and information as well
            Subject to prior sale!***
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used  Milling Machining Centers 5 Axis CHIRON Mill 1250


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021013 · Milling Machining Centers 5 Axis

          CHIRON - Mill 1250 - - 2014 - Siemens 840 D

          Technical details
          x-travel 1250 mm︱y-travel 820 mm︱z-travel 840 mm︱Control Siemens 840 D ︱main spindle: ︱turning speed range - main spindle 12000 min/-1︱drive capacity - main spindle 36 kW︱rotary table 630 mm/min︱table surface area 1380 x 600 mm︱tool taper HSK - A 63 ︱number of tool places 40 Pos.︱change-time tool to tool 1,5 sec︱max. table load 1000 kg︱
            x-travel 1250 mm
            y-travel 820 mm
            z-travel 840 mm
            Control Siemens 840 D
            turning speed range - main spind. 12000 min/-1
            drive capacity - main spindle 36 kW
            rotary table 630 mm/min
            table surface area 1380 x 600 mm
            tool taper HSK - A 63
            number of tool places 40 Pos.
            change-time tool to tool 1,5 sec
            max. table load 1000 kg
          Datasheet
          Request / Contact
          used  Milling Machining Centers 5 Axis UNITECH FB 63


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2020079 · Milling Machining Centers 5 Axis

          UNITECH - FB 63 - - 2012 - Heidenhain iTNC 530

          Technical details
          x-travel 1080 mm︱y-travel 610 mm︱z-travel 810 mm︱spindle tunring speed 15000 U/min︱Control Heidenhain iTNC 530 ︱rapid speed max. 30000 mm/min︱rotary table diameter 600 mm︱surface area table 1100 x 600 mm︱number of tool places 40 Pos.︱tool taper BT40 ︱max. workpiece weight 500 kg︱weight of the machine ca. 8 t︱
          The machine can be viewed under power by appointment. Equipment and accessories: - ICS up to 60 bar - Compressed air through the center of the spindle - chip conveyor - Minimal amount of lubrication The machine has a zero point clamping system built into the rotary table with 10 Tensioners from Schunk. This can be done with compressed air. In the short term, the ball screws are swapped in X and Y, in Z for example a year ago. *** Changes and errors in the technical data and also see Reserve prior sale! ***
            x-travel 1080 mm
            y-travel 610 mm
            z-travel 810 mm
            spindle tunring speed 15000 U/min
            Control Heidenhain iTNC 530
            rapid speed max. 30000 mm/min
            rotary table diameter 600 mm
            surface area table 1100 x 600 mm
            number of tool places 40 Pos.
            tool taper BT40
            max. workpiece weight 500 kg
            weight of the machine ca. 8 t
            Description :
            The machine can be viewed under power by appointment.

            Equipment and accessories:
            - ICS up to 60 bar
            - Compressed air through the center of the spindle
            - chip conveyor
            - Minimal amount of lubrication

            The machine has a zero point clamping system built into the rotary table with 10
            Tensioners from Schunk. This can be done with compressed air.

            In the short term, the ball screws are swapped in X and Y, in Z for example
            a year ago.

            *** Changes and errors in the technical data and also see
            Reserve prior sale! ***
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Trader Profile:   Matthias Ehlers Werkzeugmaschinen

          Contact Trader



            Matthias Ehlers Werkzeugmaschinen
           Nikolaus-Otto-Straße 19 + 21
            22946 Trittau
            Deutschland
            +49 (0)4154 - 986 99 12">+49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
            anfrage@ehlers-wzm.de
            www.ehlers-wzm.de

          Profile of Trader




          Matthias Ehlers Werkzeugmaschinen   22946 Trittau Nikolaus-Otto-Straße 19 + 21 Deutschland
          Matthias Ehlers Werkzeugmaschinen

          Nikolaus-Otto-Straße 19 + 21



          Contact Trader


            Matthias Ehlers Werkzeugmaschinen
           Nikolaus-Otto-Straße 19 + 21
            22946 Trittau
            Deutschland
            +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
            anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
            Contact person:

           




          Machine category


          Bandsägeautomat - Horizontal · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Filteranlage · Gabelstapler - Elektro · Gewindebohrerschleifmaschine · Gewindeschleifmaschine · Kaltwalzmaschine · Keilwellenschleifmaschine · Laserbeschriftungsmaschine · Plandrehmaschine · Plasmaschneidgerät · Portal - Bearbeitungszentrum · Reinigungsanlage · Roboter - Handling · Rundtisch · Superfinishmaschine · Vertikales Bearbeitungszentrum · Werkzeugschleifmaschine · Zahnradprüfmaschine ·