European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          WeMa Antonius Pigge GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe WEILER Condor


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3607 · Center Lathe

          WEILER - Condor - - -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 170 mm︱turning length 800 mm︱centre height 165 mm︱spindle bore 38 mm︱turning speed range 24 - 2800 U/min︱digital readout ELESTA VISULESTA 4 ︱3-jaw chuck inkl. ︱tool-holder Multifix mm︱faceplate 300 mm︱total power requirement 3,0 kW︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 1850 x 800 x 1700 mm︱
          manual included chip protection wall
            turning diameter over bed 330 mm
            turning diameter over slide rest 170 mm
            turning length 800 mm
            centre height 165 mm
            spindle bore 38 mm
            turning speed range 24 - 2800 U/min
            digital readout ELESTA VISULESTA 4
            3-jaw chuck inkl.
            tool-holder Multifix mm
            faceplate 300 mm
            total power requirement 3,0 kW
            weight of the machine ca. 850 kg
            dimensions of the machine ca. 1850 x 800 x 1700 mm
            Description :
            manual included
            chip protection wall
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center GILDEMEISTER N.E.F: CTX 400


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3144 · CNC Turning- and Milling Center

          GILDEMEISTER - N.E.F: CTX 400 - - 1991 -

          Technical details
          turning diameter 500 mm︱turning length 640 mm︱control ︱weight of the machine ca. 5,2 t︱dimensions of the machine ca. 4527 x 1940 x 1730 m︱
            turning diameter 500 mm
            turning length 640 mm
            weight of the machine ca. 5,2 t
            dimensions of the machine ca. 4527 x 1940 x 1730 m
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled UNITECH UT 560


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3666 · Lathe - cycle-controlled

          UNITECH - UT 560 - - 2014 - Siemens Sinumerik 828 D

          Technical details
          greates pass round over bed 560 mm︱turning length 1500 mm︱control Siemens Sinumerik 828 D ︱swing diameter over slide rest 390 mm︱spindle speed: 2400 Upm︱bed width 345 mm︱spindle bore 80 mm︱diameter of quill 75 mm︱quill stroke 200 mm︱tailstock quill taper MT 5 ︱3-jaw chuck Schunk Rota S 315 ︱3-jaw-chuck diameter 315 mm︱main drive 14 kW︱weight of the machine ca. 2900 kg︱dimensions of the machine ca. m︱
          removeable bed bridge user interface control: Shopturn hydraulical tailstock quill adjustment key bar chuck Schunk Rota S+ 2.0 315-92 quick change tool holder Choromant Capto
            greates pass round over bed 560 mm
            turning length 1500 mm
            control Siemens Sinumerik 828 D
            swing diameter over slide rest 390 mm
            spindle speed: 2400 Upm
            bed width 345 mm
            spindle bore 80 mm
            diameter of quill 75 mm
            quill stroke 200 mm
            tailstock quill taper MT 5
            3-jaw chuck Schunk Rota S 315
            3-jaw-chuck diameter 315 mm
            main drive 14 kW
            weight of the machine ca. 2900 kg
            Description :
            removeable bed bridge

            user interface control: Shopturn

            hydraulical tailstock quill adjustment

            key bar chuck Schunk Rota S+ 2.0 315-92

            quick change tool holder Choromant Capto




          Datasheet
          Request / Contact

          Gang Drilling Machine

          used  Gang Drilling Machine ALZMETALL AB4 SV, RVT 4/3


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3116 · Gang Drilling Machine

          ALZMETALL - AB4 SV, RVT 4/3 - - 1978 -

          Technical details
          number of spindles 3 ︱bore capacity in steel (diameter) 40 mm︱bore stroke 180 mm︱weight of the machine ca. 2,3 t︱
            number of spindles 3
            bore capacity in steel (diameter. 40 mm
            bore stroke 180 mm
            weight of the machine ca. 2,3 t
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine WEBO Gradua 60


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3525 · Pillar Drilling Machine

          WEBO - Gradua 60 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 60 mm︱throat k.A. mm︱bore stroke 215 mm︱spindle taper MK 5 ︱weight of the machine ca. 2000 kg︱dimensions of the machine ca. 1300 x 800 x 2450 mm︱
            bore capacity in steel (diameter. 60 mm
            throat k.A. mm
            bore stroke 215 mm
            spindle taper MK 5
            weight of the machine ca. 2000 kg
            dimensions of the machine ca. 1300 x 800 x 2450 mm
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine SOLID BV35


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3174 · Pillar Drilling Machine

          SOLID - BV35 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 340 mm︱bore stroke 180 mm︱tool taper MK 4 ︱turning speed range - stepless 45 - 1400 U/min︱feed stepless 0,04 - 0,35 mm/U︱motor speeds: 3 ︱table-size 500 x 500 mm︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 1000 x 500 x 1950 mm︱
          inkl. working light function not tested
            bore capacity in steel (diameter. 35 mm
            throat 340 mm
            bore stroke 180 mm
            tool taper MK 4
            turning speed range - stepless 45 - 1400 U/min
            feed stepless 0,04 - 0,35 mm/U
            motor speeds: 3
            table-size 500 x 500 mm
            weight of the machine ca. 900 kg
            dimensions of the machine ca. 1000 x 500 x 1950 mm
            Description :
            inkl. working light

            function not tested
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine OPTIMUM Opti drill B28 H vario


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3521 · Pillar Drilling Machine

          OPTIMUM - Opti drill B28 H vario - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 28 mm︱throat 200 mm︱bore stroke 105 mm︱spindle taper MK 3 ︱number of spindle speeds 12 ︱spindle speed: 35 - 5600 Upm︱column diameter 92 mm︱table-size 340 x 360 mm︱table rotating 360 °︱total power requirement 1,5 kW︱weight of the machine ca. ca. 170 kg︱dimensions of the machine ca. ca. 750 x 500 x 1800 mm︱
            bore capacity in steel (diameter. 28 mm
            throat 200 mm
            bore stroke 105 mm
            spindle taper MK 3
            number of spindle speeds 12
            spindle speed: 35 - 5600 Upm
            column diameter 92 mm
            table-size 340 x 360 mm
            table rotating 360 °
            total power requirement 1,5 kW
            weight of the machine ca. ca. 170 kg
            dimensions of the machine ca. ca. 750 x 500 x 1800 mm
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine IXION BS 23 FST


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3469 · Pillar Drilling Machine

          IXION - BS 23 FST - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 23 / 28 mm︱throat 260 mm︱bore stroke 120 mm︱tool taper MK 3 ︱table-size 500 x 350 mm︱column diameter 100 mm︱total power requirement 1,3 kW︱weight of the machine ca. 400 kg︱dimensions of the machine ca. 800 x 600 x 1750 mm︱
          Machine info - right-left rotation - stepless speed adjustment - automatic feed 0,1/ 0,16 / 0,25
            bore capacity in steel (diameter. 23 / 28 mm
            throat 260 mm
            bore stroke 120 mm
            tool taper MK 3
            table-size 500 x 350 mm
            column diameter 100 mm
            total power requirement 1,3 kW
            weight of the machine ca. 400 kg
            dimensions of the machine ca. 800 x 600 x 1750 mm
            Description :
            Machine info
            - right-left rotation
            - stepless speed adjustment
            - automatic feed 0,1/ 0,16 / 0,25
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine FLOTT SB 23


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3522 · Pillar Drilling Machine

          FLOTT - SB 23 - - unbekannt -

          Technical details
          bore capacity in steel (diameter) 23 mm︱throat 300 mm︱bore stroke 150 mm︱table-size 300 x 410 mm︱spindle taper MK 2 ︱total power requirement 1,4 kW︱weight of the machine ca. ca. 315 kg︱dimensions of the machine ca. ca. 700 x 900 x 1900 mm︱
            bore capacity in steel (diameter. 23 mm
            throat 300 mm
            bore stroke 150 mm
            table-size 300 x 410 mm
            spindle taper MK 2
            total power requirement 1,4 kW
            weight of the machine ca. ca. 315 kg
            dimensions of the machine ca. ca. 700 x 900 x 1900 mm
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine CASER F80 - 2000


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3026 · Radial Drilling Machine

          CASER - F80 - 2000 - - 1970 -

          Technical details
          bore capacity in steel (diameter) 80 mm︱arm length 2000 mm︱bore capacity in cast iron 100 mm︱spindle turning speed range 25 * 1670 U/min︱column diameter 500 mm︱feed range 0,08 - 0,7 mm/U︱number of feeds 8 ︱bore spindles - Morse Taper 5 ︱distance spindle /table 1740 mm︱total power requirement 5 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. m︱
            bore capacity in steel (diameter. 80 mm
            arm length 2000 mm
            bore capacity in cast iron 100 mm
            spindle turning speed range 25 * 1670 U/min
            column diameter 500 mm
            feed range 0,08 - 0,7 mm/U
            number of feeds 8
            bore spindles - Morse Taper 5
            distance spindle /table 1740 mm
            total power requirement 5 kW
            weight of the machine ca. 9 t
          Datasheet
          Request / Contact

          Rapid Radial Drilling Machine

          used  Rapid Radial Drilling Machine WEWAG ECONOMY GRS 30


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3605 · Rapid Radial Drilling Machine

          WEWAG ECONOMY - GRS 30 - - 1973 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱arm length 410 - 1000 mm︱workpiece height max. 765 mm︱coolant ja ︱boring spindle diameter 38 mm︱diameter of quill 70 mm︱spindle stroke 225 mm︱boring spindle MK 4 mm/min︱spindle turning speed - stepless 70 - 2000 U/min︱feed range - spindle 0,04 - 0,32 mm/U︱column diameter 225 mm︱bore radius max./min max. 1130 mm︱table surface area 630 x 1320 mm︱height adjustment 500 mm︱base plate 1500 x 1000 mm︱T-slots 4 Stück︱T-slot - distance 18 mm︱total power requirement 2,2 kW︱weight of the machine ca. 1,8 t︱dimensions of the machine ca. m︱
          shift of supports: 590 mm without turntable and tools
            bore capacity in steel (diameter. 32 mm
            arm length 410 - 1000 mm
            workpiece height max. 765 mm
            coolant ja
            boring spindle diameter 38 mm
            diameter of quill 70 mm
            spindle stroke 225 mm
            boring spindle MK 4 mm/min
            spindle turning speed - stepless 70 - 2000 U/min
            feed range - spindle 0,04 - 0,32 mm/U
            column diameter 225 mm
            bore radius max./min max. 1130 mm
            table surface area 630 x 1320 mm
            height adjustment 500 mm
            base plate 1500 x 1000 mm
            T-slots 4 Stück
            T-slot - distance 18 mm
            total power requirement 2,2 kW
            weight of the machine ca. 1,8 t
            Description :
            shift of supports: 590 mm

            without turntable and tools
          Datasheet
          Request / Contact

          Upright Drilling Machine

          used  Upright Drilling Machine ALZMETALL AB 35 HST


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3681 · Upright Drilling Machine

          ALZMETALL - AB 35 HST - - 1979 -

          Technical details
          bore capacity in steel (diameter) 35 mm︱throat 330 mm︱bore stroke 165 mm︱spindle taper MK4 ︱turning speed range - stepless 130-480/480-1750 U/min︱table width 742 mm︱table depth 594 mm︱total power requirement 2,2 kW︱weight of the machine ca. 750 kg︱
          Feed with electromagnetic feed clutch 0.1/0,2/0,3 right Cooling unit not available Table and Drilling Head height adjustable height adjustment of upper drilling unit: 200 mm including thread cutting device
            bore capacity in steel (diameter. 35 mm
            throat 330 mm
            bore stroke 165 mm
            spindle taper MK4
            turning speed range - stepless 130-480/480-1750 U/min
            table width 742 mm
            table depth 594 mm
            total power requirement 2,2 kW
            weight of the machine ca. 750 kg
            Description :
            Feed with electromagnetic feed clutch
            0.1/0,2/0,3

            right

            Cooling unit not available

            Table and Drilling Head height adjustable

            height adjustment of upper drilling unit: 200 mm
            including thread cutting device

          Datasheet
          Request / Contact

          milling machining centers - horizontal

          used  milling machining centers - horizontal DECKEL DC 40


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-2860 · milling machining centers - horizontal

          DECKEL - DC 40 - - 1990 - Siemens Sinumerik 8

          Technical details
          x-travel 635 mm︱y-travel 500 mm︱z-travel 630 mm︱Control Siemens Sinumerik 8 ︱b-axis 360 °︱tool taper SK 45 ︱tool change unit 40 ︱diameter of worktool holder bores 125 ( 175) mm︱spindle turning speed range 16 - 6000 U/min︱feed range 1 - 4000 mm/min︱rapid traverse 15 m/min︱size of pallet 500 x 630 mm︱numbers of pallets 2 ︱chip conveyor ︱weight of the machine ca. 12,5 t︱dimensions of the machine ca. 8300 x 5900 x 3000 m︱
          Inclusive: chip conveyor internal coolant supply approx. 20 tool holders approx. 20 roll holder reductions (SK45 to SK40)
            x-travel 635 mm
            y-travel 500 mm
            z-travel 630 mm
            Control Siemens Sinumerik 8
            b-axis 360 °
            tool taper SK 45
            tool change unit 40
            diameter of worktool holder bore. 125 ( 175) mm
            spindle turning speed range 16 - 6000 U/min
            feed range 1 - 4000 mm/min
            rapid traverse 15 m/min
            size of pallet 500 x 630 mm
            numbers of pallets 2
            weight of the machine ca. 12,5 t
            dimensions of the machine ca. 8300 x 5900 x 3000 m
            Description :
            Inclusive:
            chip conveyor
            internal coolant supply
            approx. 20 tool holders
            approx. 20 roll holder reductions (SK45 to SK40)

          Datasheet
          Request / Contact

          Travelling column milling machine

          used  Travelling column milling machine MATEC 30 HV


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3612 · Travelling column milling machine

          MATEC - 30 HV - - 2000 - Heidenhain TNC 426

          Technical details
          x-travel 3000 mm︱y-travel 600 mm︱z-travel 800 mm︱Control Heidenhain TNC 426 ︱tool changer for ... units 48 ︱turning speeds 9000 U/min︱feed 3000 mm/min︱rapid traverse 30 m/min︱spindle turning speed range max. 9000 U/min︱tool taper SK 40 ︱total power requirement 15 kW︱
          direct spindle power: 11 kW (can be increased by the manufacturer, costs must be paid by buyer) svivel milling head inner cooling center with coolant system: 20 bar full encapsulation hydraulical clamping 4 circuit, 400 bar side loading door
            x-travel 3000 mm
            y-travel 600 mm
            z-travel 800 mm
            Control Heidenhain TNC 426
            tool changer for ... units 48
            turning speeds 9000 U/min
            feed 3000 mm/min
            rapid traverse 30 m/min
            spindle turning speed range max. 9000 U/min
            tool taper SK 40
            total power requirement 15 kW
            Description :
            direct spindle power: 11 kW (can be increased by the manufacturer, costs must
            be paid by buyer)

            svivel milling head
            inner cooling center with coolant system: 20 bar
            full encapsulation
            hydraulical clamping 4 circuit, 400 bar
            side loading door
          Datasheet
          Request / Contact
          used  Travelling column milling machine METBA MB 55-X


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3352 · Travelling column milling machine

          METBA - MB 55-X - - 1989 - Heidenhain TNC 335 B*

          Technical details
          x-travel 1100 mm︱y-travel 600 mm︱z-travel 500 mm︱Control Heidenhain TNC 335 B* ︱tool taper SK40 ︱table surface - upper 1650 x 700 mm︱table face - lower 1870 x 300 mm︱spindle speed: 3000 Upm︱spindle motor ca. 9 kW︱
          control defekt!!!!! Horizontal and vertical milling Position change of the head is done manually-hydraulically Vertical head with drilling quill, drilling depth 100 m
            x-travel 1100 mm
            y-travel 600 mm
            z-travel 500 mm
            Control Heidenhain TNC 335 B*
            tool taper SK40
            table surface - upper 1650 x 700 mm
            table face - lower 1870 x 300 mm
            spindle speed: 3000 Upm
            spindle motor ca. 9 kW
            Description :
            control defekt!!!!!


            Horizontal and vertical milling
            Position change of the head is done manually-hydraulically
            Vertical head with drilling quill, drilling depth 100 m
          Datasheet
          Request / Contact

          Universal Milling Machine

          used  Universal Milling Machine NIIGATA 3 UMA_DEFEKT!


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-2815 · Universal Milling Machine

          NIIGATA - 3 UMA_DEFEKT! - - 1987 -

          Technical details
          x-travel 1000 mm︱y-travel 420 mm︱z-travel 400 mm︱table-size 1600 x 380 mm︱table load 700 kg︱spindle taper ISO 50 ︱feed range lengthways and crosswise 20 - 800 mm︱feed range - vertical 5 - 200 mm/min︱rapid traverse longitudinal and cross 3000 mm/min︱rapid traverse vertical 750 mm/min︱spindle speed: 45 - 1400 U/min︱number of milling spindle turning speeds 16 ︱distance spindle center to column 470 mm︱distance spindlenose - table min./max. 70 - 470 mm︱digital readout 3-Achsen "Axesta" ︱power capacity 11 kW︱weight of the machine ca. 3,9 t︱dimensions of the machine ca. 2245 x 2280 x 1830 mm︱
          Storage for handwheels renewed electrical problem, digital display probably defective! without milling head! No manual!
            x-travel 1000 mm
            y-travel 420 mm
            z-travel 400 mm
            table-size 1600 x 380 mm
            table load 700 kg
            spindle taper ISO 50
            feed range lengthways and crossw. 20 - 800 mm
            feed range - vertical 5 - 200 mm/min
            rapid traverse longitudinal and . 3000 mm/min
            rapid traverse vertical 750 mm/min
            spindle speed: 45 - 1400 U/min
            number of milling spindle turnin. 16
            distance spindle center to colum. 470 mm
            distance spindlenose - table min. 70 - 470 mm
            digital readout 3-Achsen "Axesta"
            power capacity 11 kW
            weight of the machine ca. 3,9 t
            dimensions of the machine ca. 2245 x 2280 x 1830 mm
            Description :
            Storage for handwheels renewed

            electrical problem, digital display probably defective!
            without milling head!

            No manual!
          Datasheet
          Request / Contact

          Belt Grinding Machine

          used  Belt Grinding Machine SIMEK MBS 75


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-720 · Belt Grinding Machine

          SIMEK - MBS 75 - - 2018 -

          Technical details
          width of the strips 75 mm︱band length 2000 mm︱band speed 37 m/s︱contact disk dimensions 250 x 75 mm︱CE-Certificate ︱total power requirement 3,5 kW︱weight of the machine ca. 95 kg︱dimensions 1000 x 700 mm︱
            width of the strips 75 mm
            band length 2000 mm
            band speed 37 m/s
            contact disk dimensions 250 x 75 mm
            total power requirement 3,5 kW
            weight of the machine ca. 95 kg
            dimensions 1000 x 700 mm
          Datasheet
          Request / Contact

          Surface Grinding Machine

          used  Surface Grinding Machine BLOHM Simplex 5


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3464 · Surface Grinding Machine

          BLOHM - Simplex 5 - - 1967 -

          Technical details
          table surface area 900 x 300 mm︱grinding length max. 500 mm︱grinding width max. 350 mm︱throat 575 mm︱x-axis 300 mm︱y-axis 570 mm︱cross feed autom. 2 . . . 65 mm/Hub︱table speeds 2 . . . 30 m/min︱grinding wheel speeds 1400 / 2800 U/min︱grinding wheel diameter 150 - 300 mm︱grinding wheel width 50 mm︱grinding wheel hole diameter 76 mm︱table height over floor 1000 mm︱dimensions of the machine ca. 2200 x 1500 mm︱base area 1000 x 1025 mm︱Weight ca.1800 kg︱total power requirement 6,5 kW︱
          user manual available
            table surface area 900 x 300 mm
            grinding length max. 500 mm
            grinding width max. 350 mm
            throat 575 mm
            x-axis 300 mm
            y-axis 570 mm
            cross feed autom. 2 . . . 65 mm/Hub
            table speeds 2 . . . 30 m/min
            grinding wheel speeds 1400 / 2800 U/min
            grinding wheel diameter 150 - 300 mm
            grinding wheel width 50 mm
            grinding wheel hole diameter 76 mm
            table height over floor 1000 mm
            dimensions of the machine ca. 2200 x 1500 mm
            base area 1000 x 1025 mm
            Weight ca.1800 kg
            total power requirement 6,5 kW
            Description :
            user manual available
          Datasheet
          Request / Contact

          Surface Grinding Machine - Horizontal

          used  Surface Grinding Machine - Horizontal WMW Mikromat SFW 200x600/3


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3545 · Surface Grinding Machine - Horizontal

          WMW - Mikromat SFW 200x600/3 - - 1987 -

          Technical details
          grinding length max. 630 mm︱grinding width max. 200 mm︱workpiece height . mm︱x-axis max. 250 mm︱y-axis max. 710 mm︱distance spindle center to table max. 500 mm︱table surface area 0,25 mm︱table load max. 1,1 t︱table speed -stepless- 2 - 18 m/min︱cross feed autom. . ︱dust exhaust 0,25 kW︱coolant pump 0,09 kW︱total power requirement ca. 4,5 kW︱weight of the machine ca. 1,3 t︱dimensions of the machine ca. 2400 x 1600 x 1900 mm︱
          Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke; - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed
            grinding length max. 630 mm
            grinding width max. 200 mm
            workpiece height . mm
            x-axis max. 250 mm
            y-axis max. 710 mm
            distance spindle center to table max. 500 mm
            table surface area 0,25 mm
            table load max. 1,1 t
            table speed -stepless- 2 - 18 m/min
            cross feed autom. .
            dust exhaust 0,25 kW
            coolant pump 0,09 kW
            total power requirement ca. 4,5 kW
            weight of the machine ca. 1,3 t
            dimensions of the machine ca. 2400 x 1600 x 1900 mm
            Description :
            Adjustments
            Y axis: 1 scale value = 0.005 mm
            Z axis: 1 scale value = 0.002 mm
            Manual adjustment (within the range of 250 mm of the Y axis): 80 mm
            Speeds:
            automatic cross feed
            Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke;
            - continuous: 0 - 4 m/min
            Grinding wheel Ø max. 200 mm
            Grinding wheel bore: 51 mm
            Grinding wheel width: 20 mm

            Diamond dressing unit
            Digitaldisplay for 2 advertisement vertical infeed
          Datasheet
          Request / Contact

          Drill Grinding Machine

          used  Drill Grinding Machine BRIERLEY ZB 25


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3271 · Drill Grinding Machine

          BRIERLEY - ZB 25 - - unbekannt -

          Technical details
          drill diameter 1,5 - 25 mm︱lip angle 40 - 180 °︱6-jaw-chucks ︱various equipment ︱manual included
          Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures)
            drill diameter 1,5 - 25 mm
            lip angle 40 - 180 °
            Description :
            Encapsulated drive motor: closed version, air-cooled, rotary and AC
            drills with cylindrical or conical shank
            left and right-hand drills
            6 Jaw chuck
            Device for compressed air cooling
            various equipment (see pictures)
          Datasheet
          Request / Contact

          Band Saw - Automatic - Horizontal

          used  Band Saw - Automatic - Horizontal MEP Shark 280 SXI duty Halbautomat


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3676 · Band Saw - Automatic - Horizontal

          MEP - Shark 280 SXI duty Halbautomat - - unbekannt -

          Technical details
          cutting diameter rund 250 mm︱cutting diameter vierkant 230 mm︱cutting diameter flach 280 x 200 mm︱dimensions of saw-band 2950 x 27 x 0,9 mm︱sawing stroke 290 mm︱weight of the machine ca. 610 kg︱
            cutting diameter rund 250 mm
            cutting diameter vierkant 230 mm
            cutting diameter flach 280 x 200 mm
            dimensions of saw-band 2950 x 27 x 0,9 mm
            sawing stroke 290 mm
            weight of the machine ca. 610 kg
          Datasheet
          Request / Contact
          used  Band Saw - Automatic - Horizontal MEP Shark 320 SX duty


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3606 · Band Saw - Automatic - Horizontal

          MEP - Shark 320 SX duty - - 1999 -

          Technical details
          cutting range rund 260 mm︱cutting range vierkant 250 mm︱cutting range flach 320 x 200 mm︱dimensions of saw-band 3150 x 27 x 0,9 mm︱weight of the machine ca. 710 kg︱
          with 7,5 meter roller conveyor -> 3000 mm infeed 4500 mm outfeed cutting range 0 °: round 260 mm; square 250 mm; flat 320 x 200 mm cutting range 45 °: round 230 mm; square 210 mm; flat 210 x 240 mm cutting range 60 °: round 150 mm; square 140 mm; flat 140 x 160 mm
            cutting range rund 260 mm
            cutting range vierkant 250 mm
            cutting range flach 320 x 200 mm
            dimensions of saw-band 3150 x 27 x 0,9 mm
            weight of the machine ca. 710 kg
            Description :
            with 7,5 meter roller conveyor -> 3000 mm infeed 4500 mm outfeed

            cutting range 0 °: round 260 mm; square 250 mm; flat 320 x 200 mm
            cutting range 45 °: round 230 mm; square 210 mm; flat 210 x 240 mm
            cutting range 60 °: round 150 mm; square 140 mm; flat 140 x 160 mm
          Datasheet
          Request / Contact

          Cold Circular Saw

          used  Cold Circular Saw TRENNJÄGER ST251HA


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3083 · Cold Circular Saw

          TRENNJÄGER - ST251HA - - unbekannt -

          Technical details
          saw blade diameter 275 mm︱cutting diameter 90 mm︱stroke mm︱capacity 45 degrees: flat 150 x 100 mm︱cutting speed 16/32 m/min︱miter cut 45 °︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            saw blade diameter 275 mm
            cutting diameter 90 mm
            capacity 45 degrees: flat 150 x 100 mm
            cutting speed 16/32 m/min
            miter cut 45 °
            Description :

          Datasheet
          Request / Contact

          T-Slot Shaping Machine

          used  T-Slot Shaping Machine HAHNDORF - RUWO SEW 52/300


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-2112 · T-Slot Shaping Machine

          HAHNDORF - RUWO - SEW 52/300 - - unbekannt -

          Technical details
          slot-milling length 300 mm︱groove width 34 mm︱flute depth mm︱cutting speed 6 m/min︱return speed 6 mm/min︱clamping plate 380 x 300 mm︱weight of the machine ca. 285 kg︱dimensions of the machine ca. 590 x 1150 mm︱
          Bore-Ø min.: - with spezial knifes: 6 mm - with ram inserts: 20 mm - with normal bumper: 40 mm Electromagnetic Brake with various accesssories (see pictures)
            slot-milling length 300 mm
            groove width 34 mm
            cutting speed 6 m/min
            return speed 6 mm/min
            clamping plate 380 x 300 mm
            weight of the machine ca. 285 kg
            dimensions of the machine ca. 590 x 1150 mm
            Description :
            Bore-Ø min.:
            - with spezial knifes: 6 mm
            - with ram inserts: 20 mm
            - with normal bumper: 40 mm

            Electromagnetic Brake

            with various accesssories (see pictures)
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   

            Trader Profile:   Wema Antonius Pigge GmbH

          Contact Trader



            Wema Antonius Pigge GmbH
           Barnstorfer Str. 3
            49424 - Goldenstedt
            Deutschland
            +49 (0)444496700">+49 (0)444496700
            +49 (0)4444967010
            info@wema-pigge.de
            www.wema-pigge.de

          Profile of Trader

          About Us

          The company WeMa Antonius Pigge GmbH welcomes you to the site and would like to introduce itself briefly below:


           

          For more than 30 years Mr. Antonius Pigge, company founder and CEO, is operating in the machine sector. 


          We focus on the purchase and sale as well as the placement of new and used machine tools and sheet metal working machines and complete factory equipment at national and international level. Also, we will take care of the discrete completion of company dissolutions.



          On a warehouse space of about 4500 m² of warehouse space, we offer a wide range of overhauled and partly overhauled, function-tested machinery, mostly ready for demonstration and immediately available (mainly for metal-processing operations).


          As a professional partner we provide our customers with advice and support. We give highest priority to our customers' needs to find the best solutions for them.


          Let us convince you of our services.


          Years of experience, expertise, technical know-how and the international connections enable us to offer used high quality machines at attractive rates. We can guarantee fast and easy handling.



          Take advantage of these one-stop services:


          purchase


          sale


          placement


          removal


          transport organization


          complete handling


           

          Increase your productivity - we are happy to help you!

          Address
          WeMa Antonius Pigge GmbH 
          Barnstorfer Str. 3 
          49424 Goldenstedt 
          Germany

          Contact
          Phone:  +49 (0) 4444-9670-0
          Fax:  +49 (0) 4444-9670-10   
          E-Mail: info@wema-pigge.de 
          Web: www.wema-pigge.de




          Wema Antonius Pigge GmbH   49424 - Goldenstedt Barnstorfer Str. 3 Deutschland
          Wema Antonius Pigge GmbH

          Barnstorfer Str. 3



          Contact Trader


            Wema Antonius Pigge GmbH
           Barnstorfer Str. 3
            49424 - Goldenstedt
            Deutschland
            +49 (0)444496700
            +49 (0)4444967010
            info@wema-pigge.de
            www.wema-pigge.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Airless- und Farbspritzgerät · Arbeitstisch · Bandschleifmaschine · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Blechrundbiegemaschine · Bohrerschleifmaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppelständerpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Einständerpresse - Hydraulisch · Fahrständerfräsmaschine · Flachschleifmaschine · Flachschleifmaschine - Horizontal · Flügeltürenschrank · Fräsmaschine - Universal · Förderband · Gabelstapler - Elektro · Hydraulische Lochstanze · Industrie-Staubsauger · Kaltkreissäge · Kehrmaschine · Kompressor · Kreissäge - Automatisch · Lagertechnik · Leit- und Zugspindeldrehmaschine · Magnetbandförderer · Nuten-Stossmaschine · Planscheibe · Profilstahlschere - Kombiniert · Radialbohrmaschine · Regalanlage für Paletten · Reihenbohrmaschine · Richtpresse - Doppelständer · Schnellradialbohrmaschine · Schnellradiale - Bohrmaschine · Schrauben Kompressor · Schraubstock · Schubmaststapler - Elektro · Schweißanlage · Schweißdrehtisch - rund · Schwerlastanhänger · Senkerodiermaschine · Spannmittel · Spanntisch · Ständerbohrmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tieflochbohrmaschine · Tischkreissäge · Transportsysteme · Tuschierpresse · Umreifungsmaschine · Unterstellbock · Ventilator · Werkstattpressen - hydraulisch · WIG-Schweißgerät ·