European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          STEINHAND GmbH - Stockist for used machines

          Machinelist:


          Automatic Curve Lathe

          used  Automatic Curve Lathe WACHTLER A25 GLE


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1239 · Automatic Curve Lathe

          WACHTLER - A25 GLE - - 2018 -

          Technical details
          - - - - - Main spindle - - - - - - - - - - -︱hollow 25 mm︱--- Subspindle --- - - - - - -︱hollow 15 mm︱
          Single spindle automatic lathe WACHTLER - A25 GLE All accessories are included. The machine is in a well-maintained condition. Please refer to the offer for further technical details. Machine video available on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: A 25 | A-25 | A25GLE
            - - - - - Main spindle - - - - - - - - - - -
            hollow 25 mm
            --- Subspindle --- - - - - - -
            hollow 15 mm
            Description :
            Single spindle automatic lathe WACHTLER - A25 GLE

            All accessories are included.

            The machine is in a well-maintained condition.

            Please refer to the offer for further technical details.

            Machine video available on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: A 25 | A-25 | A25GLE
          Datasheet
          Request / Contact

          CNC Turning & Grinding Center - vertical

          used  CNC Turning & Grinding Center - vertical EMAG VSC 400 DDS


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1308 · CNC Turning & Grinding Center - vertical

          EMAG - VSC 400 DDS - - 2010 - SIEMENS 840D

          Technical details
          max. swing over bed 260 mm︱max. turning diameter 315 mm︱control SIEMENS 840D ︱spindle bore 50 mm︱spindle diameter in front bearing 100 mm︱Torque 460 Nm︱chucking diameter 200 / 250 mm︱with 1-bed slide ︱number of cross-slides 1 ︱tool taper HSK C63 ︱numbers of positions in the tool changer 12 ︱max. tool diameter 40 mm︱Dimensions (L x W x H) 5.500 x 11.600 x 3.300 mm︱weight of the machine 12.500 kg︱
          6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS Additional equipment: - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka) The machine is in very good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS
            max. swing over bed 260 mm
            max. turning diameter 315 mm
            control SIEMENS 840D
            spindle bore 50 mm
            spindle diameter in front bearin. 100 mm
            Torque 460 Nm
            chucking diameter 200 / 250 mm
            number of cross-slides 1
            tool taper HSK C63
            numbers of positions in the tool. 12
            max. tool diameter 40 mm
            Dimensions (L x W x H) 5.500 x 11.600 x 3.300 mm
            weight of the machine 12.500 kg
            Description :
            6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS


            Additional equipment:

            - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka)

            The machine is in very good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center HWACHEON CUTEX 240 B SMC


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1339 · CNC Turning- and Milling Center

          HWACHEON - CUTEX 240 B SMC - - 2014 - FANUC 0i-TD

          Technical details
          swing over bed 580 mm︱cutting diameter 215 - 355 mm︱Cutting Length max. 556,5 mm︱main spindle speeds 5.000 U/min︱Subspindle speed 6.000 U/min︱control FANUC 0i-TD ︱numbers of positions in the tool changer 12 ︱Dimensions (L x W x H) 3.230 x 1.815 x 1.915 mm︱weight of the machine 4.400 kg︱
          Double-spindle CNC Turning- and Milling Center | HWACHEON - CUTEX 240 B SMC - C-Axis with Driven tool positions The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CUTEX-240 BSMC | CUTEX 240B S MC | CUTEX240B SMC
            swing over bed 580 mm
            cutting diameter 215 - 355 mm
            Cutting Length max. 556,5 mm
            main spindle speeds 5.000 U/min
            Subspindle speed 6.000 U/min
            control FANUC 0i-TD
            numbers of positions in the tool. 12
            Dimensions (L x W x H) 3.230 x 1.815 x 1.915 mm
            weight of the machine 4.400 kg
            Description :
            Double-spindle CNC Turning- and Milling Center | HWACHEON - CUTEX 240 B SMC

            - C-Axis with Driven tool positions

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: CUTEX-240 BSMC | CUTEX 240B S MC | CUTEX240B SMC
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX G400 S-1/300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1044 · CNC Turning- and Milling Center

          INDEX - G400 S-1/300 - - 2011 - INDEX - C200-4D

          Technical details
          work travel X:320 & Z:1250 mm︱rapid traverse X:20 & Z:40 m/min︱control INDEX - C200-4D ︱--- MOTOR MILLING SPINDLE --- ------------------------- ︱tool taper HSK A63 ︱turning speeds 12000 U/min︱Power 27,5 KW︱front bearing 80 mm︱turning speeds 3000 U/min︱MAIN SPINDLE D102 direct drive ------------------------- ︱spindle diameter in front bearing 1200 mm︱spindle passage 102 mm︱forward bearing diameter 170 mm︱
          CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300
            work travel X:320 & Z:1250 mm
            rapid traverse X:20 & Z:40 m/min
            control INDEX - C200-4D
            --- MOTOR MILLING SPINDLE --- -------------------------
            tool taper HSK A63
            turning speeds 12000 U/min
            Power 27,5 KW
            front bearing 80 mm
            turning speeds 3000 U/min
            MAIN SPINDLE D102 direct drive -------------------------
            spindle diameter in front bearin. 1200 mm
            spindle passage 102 mm
            forward bearing diameter 170 mm
            Description :
            CNC Turning- and Milling Center | INDEX - G400 S-1/300

            The machine is in a very good condition
            with only 2500 H main working hours.

            + MARPOSS probe

            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G400 | G 400 | G400 S1 300 | G400S1 300
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center MAZAK QUICKTURN NEXUS 250-IIM


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1402 · CNC Turning- and Milling Center

          MAZAK - QUICKTURN NEXUS 250-IIM - - 2007 - Mazak Mazatrol Matrix Nex

          Technical details
          Max. Turning length 1.021 mm︱max. swing diameter 230 mm︱turning diameter over bed 675 mm︱turning diameter over slide 276 mm︱control Mazak Mazatrol Matrix Nex ︱numbers of positions in the tool changer 12 ︱number of spindle speeds 4.000 U/min︱
          CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
            Max. Turning length 1.021 mm
            max. swing diameter 230 mm
            turning diameter over bed 675 mm
            turning diameter over slide 276 mm
            control Mazak Mazatrol Matrix Nex
            numbers of positions in the tool. 12
            number of spindle speeds 4.000 U/min
            Description :
            CNC Turning- and Milling Center | MAZAK - QUICKTURN NEXUS 250-IIM


            The machine is in good condition.

            Please note that the technical details
            were added from comparable machines.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: QUICK TURN | NEXUS 250 | NEXUS250 | QTN
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX G300


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1364 · CNC Turning- and Milling Center

          INDEX - G300 - - 2000 - Siemens C 200-4

          Technical details
          travel -x axis 140 mm︱travel -z axis 710 mm︱control Siemens C 200-4 ︱main spindle speeds 5.000 U/min︱bore diameter 65 mm︱numbers of positions in the tool changer 24 (2x12)
          CNC Turning- and Milling Center | INDEX - G300 + 2 turret + tailstock + bar feeder: Index MBL 65 Scope of delivery: - tool holder fixed The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G 300 | G-300
            travel -x axis 140 mm
            travel -z axis 710 mm
            control Siemens C 200-4
            main spindle speeds 5.000 U/min
            bore diameter 65 mm
            numbers of positions in the tool. 24 (2x12)
            Description :
            CNC Turning- and Milling Center | INDEX - G300

            + 2 turret
            + tailstock
            + bar feeder: Index MBL 65

            Scope of delivery:
            - tool holder fixed


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: G 300 | G-300

          Datasheet
          Request / Contact

          Facing Lathe

          used  Facing Lathe ZERBST DP05/W08


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1376 · Facing Lathe

          ZERBST - DP05/W08 - - 1985 - 2010 - Siemens Sinumerik 840D

          Technical details
          faceplate diameter 4.000 mm︱travel -x axis 4.500 mm︱travel -z axis 600 mm︱control Siemens Sinumerik 840D ︱feed range 0 - 8.000 mm/min︱turning speeds 1) 0,7 - 5,6 U/min︱turning speeds 2) 2,8 - 22,4 U/min︱turning speeds 2,1 - 56 U/min︱tool taper Sauter
          Head lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08
            faceplate diameter 4.000 mm
            travel -x axis 4.500 mm
            travel -z axis 600 mm
            control Siemens Sinumerik 840D
            feed range 0 - 8.000 mm/min
            turning speeds 1) 0,7 - 5,6 U/min
            turning speeds 2) 2,8 - 22,4 U/min
            turning speeds 2,1 - 56 U/min
            tool taper Sauter
            Description :
            Head lathe | ZERBST - DP05/W08

            Scope of delivery:

            - Chip conveyor
            - Hydraulic unit

            The ZERBST - DP05/W08 has been retrofitted in 2010.

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DP05W08 | DP05 W08 | DP05-W08
          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe STAR SA-12


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1348 · Turning Automatic Lathe - swiss lathe

          STAR - SA-12 - - 1999 - FANUC 18i-TA

          Technical details
          control FANUC 18i-TA ︱- - - - - - - - -︱- - - - - - - - -︱
          CNC AUTOMATIC LATHE | STAR - SA-12 with bar feeder The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SA 12 | SA12
            control FANUC 18i-TA
            - - - - - - - - -
            - - - - - - - - -
            Description :
            CNC AUTOMATIC LATHE | STAR - SA-12 with bar feeder

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: SA 12 | SA12
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine EMAG VL 7 mLT


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1366 · Vertical Turning Machine

          EMAG - VL 7 mLT - - 2011 - FANUC 31i/32i

          Technical details
          chucking diameter 315 / 400 mm︱swing diameter 420 mm︱travel -x axis 850 mm︱travel -z axis 315 mm︱control FANUC 31i/32i ︱Turning speeds mainspindle 3.400 U/min︱numbers of positions in the tool changer 12 ︱driven tools turning speeds 6.000 U/min︱Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm︱weight of the machine 10.000 kg︱
          Vertical single spindle CNC lathe | EMAG - VL 7 mLT with driven tools, probe and ITC. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL7 | VL7mLT | VL-7
            chucking diameter 315 / 400 mm
            swing diameter 420 mm
            travel -x axis 850 mm
            travel -z axis 315 mm
            control FANUC 31i/32i
            Turning speeds mainspindle 3.400 U/min
            numbers of positions in the tool. 12
            driven tools turning speeds 6.000 U/min
            Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm
            weight of the machine 10.000 kg
            Description :
            Vertical single spindle CNC lathe | EMAG - VL 7 mLT
            with driven tools, probe and ITC.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL7 | VL7mLT | VL-7
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VL 7 mLT


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1367 · Vertical Turning Machine

          EMAG - VL 7 mLT - - 2011 - FANUC 31i/32i

          Technical details
          chucking diameter 315 / 400 mm︱swing diameter 420 mm︱travel -x axis 850 mm︱travel -z axis 315 mm︱control FANUC 31i/32i ︱Turning speeds mainspindle 3.400 U/min︱numbers of positions in the tool changer 12 ︱driven tools turning speeds 6.000 U/min︱Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm︱weight of the machine 10.000 kg︱
          Vertical single spindle CNC lathe | EMAG - VL 7 mLT with driven tools, probe and ITC. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL7 | VL7mLT | VL-7
            chucking diameter 315 / 400 mm
            swing diameter 420 mm
            travel -x axis 850 mm
            travel -z axis 315 mm
            control FANUC 31i/32i
            Turning speeds mainspindle 3.400 U/min
            numbers of positions in the tool. 12
            driven tools turning speeds 6.000 U/min
            Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm
            weight of the machine 10.000 kg
            Description :
            Vertical single spindle CNC lathe | EMAG - VL 7 mLT
            with driven tools, probe and ITC.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL7 | VL7mLT | VL-7
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VL 7 mLT


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1368 · Vertical Turning Machine

          EMAG - VL 7 mLT - - 2011 - FANUC 31i/32i

          Technical details
          chucking diameter 315 / 400 mm︱swing diameter 420 mm︱travel -x axis 850 mm︱travel -z axis 315 mm︱control FANUC 31i/32i ︱Turning speeds mainspindle 3.400 U/min︱numbers of positions in the tool changer 12 ︱driven tools turning speeds 6.000 U/min︱Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm︱weight of the machine 10.000 kg︱
          Vertical single spindle CNC lathe | EMAG - VL 7 mLT with driven tools, probe and ITC. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL7 | VL7mLT | VL-7
            chucking diameter 315 / 400 mm
            swing diameter 420 mm
            travel -x axis 850 mm
            travel -z axis 315 mm
            control FANUC 31i/32i
            Turning speeds mainspindle 3.400 U/min
            numbers of positions in the tool. 12
            driven tools turning speeds 6.000 U/min
            Dimensions (L x W x H) 5.250 x 1.500 x 3.500 mm
            weight of the machine 10.000 kg
            Description :
            Vertical single spindle CNC lathe | EMAG - VL 7 mLT
            with driven tools, probe and ITC.

            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VL7 | VL7mLT | VL-7
          Datasheet
          Request / Contact
          used  Vertical Turning Machine HESSAP VDM 800-12


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1315 · Vertical Turning Machine

          HESSAP - VDM 800-12 - - 2009 - Siemens 840d sl

          Technical details
          max. turning diameter 820 mm︱max. turning height 750 mm︱control Siemens 840d sl ︱tool taper HSK 100/63 ︱tools in tool magazin 120 ︱Workpiece storage 12-fach
          Vertical Lathe | HESSAP - VDM 800-12 + driven tools / C-axis + gear hobbing equipment Additional equipment: - CELLRO Toolchanger with a FANUC Robot for tool changing - LoadMaster Compact 1150 for storing the workpieces The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VDM800-12 | VDM 800 12 | VDM800 12
            max. turning diameter 820 mm
            max. turning height 750 mm
            control Siemens 840d sl
            tool taper HSK 100/63
            tools in tool magazin 120
            Workpiece storage 12-fach
            Description :
            Vertical Lathe | HESSAP - VDM 800-12

            + driven tools / C-axis
            + gear hobbing equipment


            Additional equipment:

            - CELLRO Toolchanger with a FANUC Robot for tool changing

            - LoadMaster Compact 1150 for storing the workpieces

            The machine is in good condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VDM800-12 | VDM 800 12 | VDM800 12
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VTC 250 DUO DD


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1411 · Vertical Turning Machine

          EMAG - VTC 250 DUO DD - - 2007 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine EMAG - VTC 250 DUO DD with
            ITC (7-30 bar) and driven tools

            Additional equipment:

            - Workpiece grippers on all 3 turrets
            - 12-position disc turret for driven tools and VDI 40 tool holders,
            - 12-station disc turret with cross-slot and VDI 40 tool holders,
            - 12-station disc turret for driven tools and VDI 40 tool holders,
            - NC steady rest, self-centering,
            - headstock below,
            - tailstock below,

            - chip conveyor
            - Knoll unit 1.500 l,

            - OP10: Three-jaw chuck Rhöm KFD-N 220/3,
            - OP20: Hainbuch Spanntop pull-back BZI65,
            - Live tool for axial and radial machining,
            - Tool holder with Capto 5 quick change system,
            - Artis as tool and process monitoring,


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
          Datasheet
          Request / Contact
          used  Vertical Turning Machine EMAG VTC 250 DUO ED


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1410 · Vertical Turning Machine

          EMAG - VTC 250 DUO ED - - 2005 - Siemens 840-D

          Technical details
          control Siemens 840-D ︱tool taper HSK & VDI 40 ︱- - - - - - - - -︱
          Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
            control Siemens 840-D
            tool taper HSK & VDI 40
            - - - - - - - - -
            Description :
            Vertical Turning Machine | EMAG - VTC 250 DUO ED
            with ITC (7-30 bar) and driven tools


            Additional equipment:

            - Workpiece grippers on all 3 turrets,
            - 6-station end-processing turret with HSK tool holder,
            - 12-station disc turret for driven tools and VDI 40 tool holder,
            - 12-position disc revolver with cross slot and VDI 40 tool holder,
            - NC - clamping head,
            - NC bezel, self-centering,
            - EMAG hydraulic double-piston clamping cylinder,
            - tailstock down,
            - Hydraulic double-piston clamping cylinder at the top,
            - chip conveyor,

            - Knoll plant 1.500 l,
            - Coolant supply 7-30 bar,

            - OP20: shaft chuck with retractable jaws and face drivers,
            - Tool holder with Capto 5,
            - Artis quick-change system for tool and process monitoring,
            - Tool pack is included,


            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO
          Datasheet
          Request / Contact

          Milling Machining Centers 5 Axis

          used  Milling Machining Centers 5 Axis HERMLE C 40 U


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1409 · Milling Machining Centers 5 Axis

          HERMLE - C 40 U - - 2007 - Siemens 840 D

          Technical details
          travel -x axis 850 mm︱travel -y axis 700 mm︱travel -z axis 500 mm︱control Siemens 840 D ︱number of spindle speeds 18.000 U/min︱numbers of positions in the tool changer 38 ︱tool taper HSK-A63 ︱swivable table: (NC) 800 mm︱internal coolant system feed 80 bar︱
          5-axis simultaneous machining center | HERMLE - C 40 U equipped with ITC (80 bar) & tool changer. Scope of delivery: - package of tools Additional equipment: - ITC 80 Bar - Prepared probe Renishaw - Tool laser measuring system: Blum - Laser A3 The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C40U | C-40U | C-40 U
            travel -x axis 850 mm
            travel -y axis 700 mm
            travel -z axis 500 mm
            control Siemens 840 D
            number of spindle speeds 18.000 U/min
            numbers of positions in the tool. 38
            tool taper HSK-A63
            swivable table: (NC) 800 mm
            internal coolant system feed 80 bar
            Description :
            5-axis simultaneous machining center | HERMLE - C 40 U
            equipped with ITC (80 bar) & tool changer.


            Scope of delivery:

            - package of tools

            Additional equipment:

            - ITC 80 Bar
            - Prepared probe Renishaw
            - Tool laser measuring system: Blum - Laser A3


            The machine is in good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: C40U | C-40U | C-40 U
          Datasheet
          Request / Contact
          used  Milling Machining Centers 5 Axis HERMLE C 40 U


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1386 · Milling Machining Centers 5 Axis

          HERMLE - C 40 U - - 2004 - HEIDENHAIN - iTNC 530

          Technical details
          travel -x axis 850 mm︱travel -y axis 700 mm︱travel -z axis 500 mm︱control HEIDENHAIN - iTNC 530 ︱number of spindle speeds 28.000 U/min︱tool taper HSK-A63 ︱numbers of positions in the tool changer 38 ︱rotary table diameter 420 mm︱
          5-axis simultaneous machining center | HERMLE - C 40 U equipped with ITC (40 bar) & tool changer. Scope of delivery: - 3-D Probe - Internal coolant supply 40 bar contains: -> standard filter, -> standard chip conveyor, -> standard Coolant device, -> flange for suction, -> Sealing air for standards The machine is in a well-maintained condition, works in Switzerland and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C40U | C-40U | C-40 U
            travel -x axis 850 mm
            travel -y axis 700 mm
            travel -z axis 500 mm
            control HEIDENHAIN - iTNC 530
            number of spindle speeds 28.000 U/min
            tool taper HSK-A63
            numbers of positions in the tool. 38
            rotary table diameter 420 mm
            Description :
            5-axis simultaneous machining center | HERMLE - C 40 U
            equipped with ITC (40 bar) & tool changer.


            Scope of delivery:
            - 3-D Probe
            - Internal coolant supply 40 bar contains:
            -> standard filter,
            -> standard chip conveyor,
            -> standard Coolant device,
            -> flange for suction,
            -> Sealing air for standards


            The machine is in a well-maintained condition, works in Switzerland
            and can be inspected at any time under power.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: C40U | C-40U | C-40 U
          Datasheet
          Request / Contact
          used  Milling Machining Centers 5 Axis QUASER MK-603 U


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1361 · Milling Machining Centers 5 Axis

          QUASER - MK-603 U - - 2004 - HEIDENHAIN - iTNC 530

          Technical details
          travel -x axis 800 mm︱travel -y axis 700 mm︱travel -z axis 510 mm︱c-axis 360 °︱a-axis 120° (-20° / +100°) °︱Control HEIDENHAIN - iTNC 530 ︱table diameter 630 x 500 mm︱max. workpiece diameter 700 mm︱max. workpiece height 350 mm︱max. workpiece weight 650 kg︱tool taper MAS BT 40 ︱number of spindle speeds 15.000 U/min︱numbers of tools in magazin 48 ︱Dimensions (L x W x H) 2.650 x 4.100 x 3.250 mm︱weight of the machine 13.000 kg︱
          5-axis simultaneous machining center | QUASER - MK-603 U equipped with ITC, tool changer and measuring system (HEIDENHAIN). - C-Axis with Driven tool positions Scope of delivery: - package of tools The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MK603U | MK603 U | MK 603U | MK-603U
            travel -x axis 800 mm
            travel -y axis 700 mm
            travel -z axis 510 mm
            c-axis 360 °
            a-axis 120° (-20° / +100°) °
            Control HEIDENHAIN - iTNC 530
            table diameter 630 x 500 mm
            max. workpiece diameter 700 mm
            max. workpiece height 350 mm
            max. workpiece weight 650 kg
            tool taper MAS BT 40
            number of spindle speeds 15.000 U/min
            numbers of tools in magazin 48
            Dimensions (L x W x H) 2.650 x 4.100 x 3.250 mm
            weight of the machine 13.000 kg
            Description :
            5-axis simultaneous machining center | QUASER - MK-603 U
            equipped with ITC, tool changer and measuring system (HEIDENHAIN).

            - C-Axis with Driven tool positions

            Scope of delivery:
            - package of tools


            The machine is in a well-maintained condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MK603U | MK603 U | MK 603U | MK-603U
          Datasheet
          Request / Contact

          Portal - Machining Center

          used  Portal - Machining Center AXA UPFZ 50


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1197 · Portal - Machining Center

          AXA - UPFZ 50 - - 2011 - Siemens 840D

          Technical details
          - - - - - travels - - - - - - - - - - -︱travel -x axis 6.000 mm︱travel -y axis 4.600 mm︱travel -y axis 3.400 mm︱travel -z1 / z2 axis 1.000 mm︱- - - - - Clamping areas - - - - - - - - - - -︱rotary table diameter 4070 mm︱circular table speeds 60 U/min︱max. weight capacity of rotary table 25 t︱table dimension (L x W) 4.200 x 2.500 mm︱table load 50 t︱distance between columns 4.300 mm︱- - - main spindle - - - - - - - - -︱spindle turning speed - stepless 30 - 7.500 U/min︱capacity at 100 / 40 % 19,0 / 28,3 KW︱- - - - - General data - - - - - - - - - - -︱control Siemens 840D ︱Automatic tool changer - rotary slide 11 Stk./pcs.︱Automatic tool changer - milling spindle 60 Stk./pcs.︱dimensions of the machine ca. 14,4 x 10 x 5,5 m︱
          5-axis Universal Portal-Machining Center | AXA - UPFZ 50 The 2-axis swivel head is one of the core elements of the machine series UPFZ. It processes from almost every position and thus offers the greatest possible applicability in your production. Additional equipment: Integrated horizontal lathe with additional rotary table! The turning device is composed of a magnetic clamping unit from Wagner Magnete and a hybrid feed from RÖHM - ram: CAPTO C6 Achse(Y2) - milling spindle: 28 kW - Stationary pickup station for 5 large tools Furthermore, the spindle was renewed in 2018! The machine is in a well-maintained condition and can be inspected in our Düsseldorf warehouse. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: UPFZ50 | UPFZ-50
            - - - - - travels - - - - - - - - - - -
            travel -x axis 6.000 mm
            travel -y axis 4.600 mm
            travel -y axis 3.400 mm
            travel -z1 / z2 axis 1.000 mm
            - - - - - Clamping areas - - - -. - - - - - -
            rotary table diameter 4070 mm
            circular table speeds 60 U/min
            max. weight capacity of rotary t. 25 t
            table dimension (L x W) 4.200 x 2.500 mm
            table load 50 t
            distance between columns 4.300 mm
            - - - main spindle - - - - - - - - -
            spindle turning speed - stepless 30 - 7.500 U/min
            capacity at 100 / 40 % 19,0 / 28,3 KW
            - - - - - General data - - - - - - - - - - -
            control Siemens 840D
            Automatic tool changer - rotary . 11 Stk./pcs.
            Automatic tool changer - milling. 60 Stk./pcs.
            dimensions of the machine ca. 14,4 x 10 x 5,5 m
            Description :
            5-axis Universal Portal-Machining Center | AXA - UPFZ 50

            The 2-axis swivel head is one of the core elements of the
            machine series UPFZ.
            It processes from almost every position and thus offers the
            greatest possible applicability in your production.

            Additional equipment:
            Integrated horizontal lathe with additional rotary table!
            The turning device is composed of a magnetic clamping unit
            from Wagner Magnete and a hybrid feed from RÖHM

            - ram: CAPTO C6 Achse(Y2)
            - milling spindle: 28 kW
            - Stationary pickup station for 5 large tools

            Furthermore, the spindle was renewed in 2018!

            The machine is in a well-maintained condition and can be inspected
            in our Düsseldorf warehouse.

            A machine video from the production plant will be shared on request.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: UPFZ50 | UPFZ-50
          Datasheet
          Request / Contact

          Double Spindle Milling Machine

          used  Double Spindle Milling Machine SW SCHWÄBISCHE WERKZEUGMASCHIN BA 400-2


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1390 · Double Spindle Milling Machine

          SW SCHWÄBISCHE WERKZEUGMASCHIN - BA 400-2 - - 2000 - Siemens 840 D

          Technical details
          travel -x axis 400 mm︱travel -y axis 450 mm︱travel -z axis 400 mm︱control Siemens 840 D ︱spindle distance 400 mm︱turning speed range 50 - 12.500 U/min︱tool taper HSK 63 ︱numbers of positions in the tool changer 2 x 30 ︱weight of the machine 13.800 kg︱
          4-axis horizontal dual-spindle machining center | SW - BA 400-2 equipped with coolant system & chip conveyor Scope of delivery: + 50 tool holders + 2 pcs. of clamping bridge supports Additional equipment: + Extension machine hydraulics for clamping of workpieces up to 150 bar + Oil distributor for NC rotary table + Extended coolant system + High pressure pump 70 bar/ 30L + Automatic loading door + Tool life monitoring + Signal lamp + Tool breakage control Furthermore, the spindle 2 was renewed in 09/2021! The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CWK400D | CWK400 D | CWK 400D | CWK-400 D | CWK-400D
            travel -x axis 400 mm
            travel -y axis 450 mm
            travel -z axis 400 mm
            control Siemens 840 D
            spindle distance 400 mm
            turning speed range 50 - 12.500 U/min
            tool taper HSK 63
            numbers of positions in the tool. 2 x 30
            weight of the machine 13.800 kg
            Description :
            4-axis horizontal dual-spindle machining center | SW - BA 400-2
            equipped with coolant system & chip conveyor


            Scope of delivery:
            + 50 tool holders
            + 2 pcs. of clamping bridge supports

            Additional equipment:
            + Extension machine hydraulics for clamping of workpieces up to 150 bar
            + Oil distributor for NC rotary table
            + Extended coolant system
            + High pressure pump 70 bar/ 30L
            + Automatic loading door
            + Tool life monitoring
            + Signal lamp
            + Tool breakage control

            Furthermore, the spindle 2 was renewed in 09/2021!

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: CWK400D | CWK400 D | CWK 400D | CWK-400 D | CWK-400D




          Datasheet
          Request / Contact

          milling machining centers - horizontal

          used  milling machining centers - horizontal BURKHARDT & WEBER MCX 750


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1300 · milling machining centers - horizontal

          BURKHARDT & WEBER - MCX 750 - - 2004 - Siemens 840 D

          Technical details
          capacity X-axis 1.100 mm︱capacity Y-axis 900 mm︱capacity Z-axis 1.250 mm︱control Siemens 840 D ︱number of spindle speeds 8.000 U/min︱tool taper SK 50 ︱tools in tool magazin 192 ︱workpiece weight 1.5 t︱pallet table size 630 x 800 mm︱power capacity 37 kW︱
          Horizontal machining center | BURKHARDT & WEBER - MCX 750 Special equipment: - Pallet change with 2 pallets - KNOLL coolant system - Coolant through the spindle (30 l/min at 50 bar, programmable) - Tool changer with double gripper - electronic 3D probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MCX750 | MCX-750
            capacity X-axis 1.100 mm
            capacity Y-axis 900 mm
            capacity Z-axis 1.250 mm
            control Siemens 840 D
            number of spindle speeds 8.000 U/min
            tool taper SK 50
            tools in tool magazin 192
            workpiece weight 1.5 t
            pallet table size 630 x 800 mm
            power capacity 37 kW
            Description :
            Horizontal machining center | BURKHARDT & WEBER - MCX 750


            Special equipment:

            - Pallet change with 2 pallets
            - KNOLL coolant system
            - Coolant through the spindle (30 l/min at 50 bar, programmable)
            - Tool changer with double gripper
            - electronic 3D probe

            The machine is in a well-maintained condition.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: MCX750 | MCX-750
          Datasheet
          Request / Contact
          used  milling machining centers - horizontal STARRAG HECKERT CWK 400 D


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1388 · milling machining centers - horizontal

          STARRAG HECKERT - CWK 400 D - - 2002 - Siemens 840 D

          Technical details
          travel -x axis 650 mm︱travel -y axis 650 mm︱travel -z axis 650 mm︱turning speed range 15.000 U/min︱control Siemens 840 D ︱tool taper HSK-A 63 ︱numbers of positions in the tool changer 240 4 Türme/towers︱surface area 400 x 400 mm︱weight of the machine 13.500 kg︱
          Horizontal machining center | STARRAG HECKERT - CWK 400 D equipped with internal & external coolant supply Scope of delivery: + 50 tool holders + 2 clamping tower + chip conveyor + probe Additional equipment: - Remote diagnostics - Signal light - Tool life monitoring - NC rotary table with direct drive The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CWK400D | CWK400 D | CWK 400D | CWK-400 D | CWK-400D
            travel -x axis 650 mm
            travel -y axis 650 mm
            travel -z axis 650 mm
            turning speed range 15.000 U/min
            control Siemens 840 D
            tool taper HSK-A 63
            numbers of positions in the tool. 240 4 Türme/towers
            surface area 400 x 400 mm
            weight of the machine 13.500 kg
            Description :
            Horizontal machining center | STARRAG HECKERT - CWK 400 D
            equipped with internal & external coolant supply

            Scope of delivery:

            + 50 tool holders
            + 2 clamping tower
            + chip conveyor
            + probe

            Additional equipment:

            - Remote diagnostics
            - Signal light
            - Tool life monitoring
            - NC rotary table with direct drive

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: CWK400D | CWK400 D | CWK 400D | CWK-400 D | CWK-400D
          Datasheet
          Request / Contact
          used  milling machining centers - horizontal STARRAG HECKERT CWK 400 D


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1387 · milling machining centers - horizontal

          STARRAG HECKERT - CWK 400 D - - 2001 - Siemens 840 D

          Technical details
          travel -x axis 650 mm︱travel -y axis 650 mm︱travel -z axis 650 mm︱turning speed range 10.000 U/min︱control Siemens 840 D ︱tool taper SK 40 ︱numbers of positions in the tool changer 60 ︱surface area 400 x 400 mm︱weight of the machine 14.000 kg︱
          Horizontal machining center | STARRAG HECKERT - CWK 400 D equipped with internal & external coolant supply Scope of delivery: + 50 tool holders + 2 clamping tower + chip conveyor + probe Additional equipment: - Remote diagnostics - Signal light - Tool life monitoring - NC rotary table with direct drive The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CWK400D | CWK400 D | CWK 400D | CWK-400 D | CWK-400D
            travel -x axis 650 mm
            travel -y axis 650 mm
            travel -z axis 650 mm
            turning speed range 10.000 U/min
            control Siemens 840 D
            tool taper SK 40
            numbers of positions in the tool. 60
            surface area 400 x 400 mm
            weight of the machine 14.000 kg
            Description :
            Horizontal machining center | STARRAG HECKERT - CWK 400 D
            equipped with internal & external coolant supply

            Scope of delivery:

            + 50 tool holders
            + 2 clamping tower
            + chip conveyor
            + probe

            Additional equipment:

            - Remote diagnostics
            - Signal light
            - Tool life monitoring
            - NC rotary table with direct drive

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: CWK400D | CWK400 D | CWK 400D | CWK-400 D | CWK-400D
          Datasheet
          Request / Contact
          used  milling machining centers - horizontal STARRAG HECKERT CWK 400 D


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1389 · milling machining centers - horizontal

          STARRAG HECKERT - CWK 400 D - - 2001 - Siemens 840 D

          Technical details
          travel -x axis 650 mm︱travel -y axis 650 mm︱travel -z axis 650 mm︱turning speed range 15.000 U/min︱control Siemens 840 D ︱tool taper HSK-A 63 ︱numbers of positions in the tool changer 60 ︱surface area 400 x 400 mm︱weight of the machine 11.400 kg︱
          Horizontal machining center | STARRAG HECKERT - CWK 400 D equipped with internal & external coolant supply Scope of delivery: + 50 tool holders + 2 clamping tower + chip conveyor + probe Additional equipment: - Remote diagnostics - Signal light - Tool life monitoring - NC rotary table with direct drive The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CWK400D | CWK400 D | CWK 400D | CWK-400 D | CWK-400D
            travel -x axis 650 mm
            travel -y axis 650 mm
            travel -z axis 650 mm
            turning speed range 15.000 U/min
            control Siemens 840 D
            tool taper HSK-A 63
            numbers of positions in the tool. 60
            surface area 400 x 400 mm
            weight of the machine 11.400 kg
            Description :
            Horizontal machining center | STARRAG HECKERT - CWK 400 D
            equipped with internal & external coolant supply

            Scope of delivery:

            + 50 tool holders
            + 2 clamping tower
            + chip conveyor
            + probe

            Additional equipment:

            - Remote diagnostics
            - Signal light
            - Tool life monitoring
            - NC rotary table with direct drive

            The machine is in a well-maintained condition and
            can be inspected at any time under power.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: CWK400D | CWK400 D | CWK 400D | CWK-400 D | CWK-400D
          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal DECKEL-MAHO DMU 80 E


          • STEINHAND GmbH
          • Am Stahlwerk 15
          • 45527 Hattingen
          • Deutschland

          • +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
          • info@steinhand.de
            www.steinhand.de
          #2026-1412 · milling machining centers - universal

          DECKEL-MAHO - DMU 80 E - - 1999 - HEIDENHAIN - TNC 426

          Technical details
          travel -x axis 800 mm︱travel -y axis 650 mm︱travel -z axis 550 mm︱Control HEIDENHAIN - TNC 426 ︱tool adaptor SK40 ︱numbers of positions in the tool changer 25 ︱surface area 1.100 x 650 mm︱
          Universal - milling machining centers | DECKEL-MAHO - DMU 80 E equipped with tool changer. The machine is in a good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU80E | DMU80 E | 80E | 80 E
            travel -x axis 800 mm
            travel -y axis 650 mm
            travel -z axis 550 mm
            Control HEIDENHAIN - TNC 426
            tool adaptor SK40
            numbers of positions in the tool. 25
            surface area 1.100 x 650 mm
            Description :
            Universal - milling machining centers | DECKEL-MAHO - DMU 80 E
            equipped with tool changer.

            The machine is in a good condition.

            Please refer to further technical details in the attachement of the offer.

            - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
            #Tags: DMU80E | DMU80 E | 80E | 80 E
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          •   
          •   

            Trader Profile:   Steinhand GmbH

          Contact Trader



            Steinhand GmbH
           Am Stahlwerk 15
            45527 - Hattingen
            Deutschland
            +49 (0) 2324 / 977 26 - 01">+49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
            info@steinhand.de
            www.steinhand.de

          Profile of Trader

          APPRECIATION, UNCONVENTIONAL SOLUTIONS AND RELIABILITY ARE THE BASIS OF OUR WORK – THAT IS WHAT WE STAND FOR!

          Throughout the years, we have gained extensive experience and competence in the machine dealership. With us, you have a reliable partner at your side when it comes to used machines from the metal processing industry. We have specialized in the trade of lathes-, milling machines, boring machines, presses and entire production lines. Our customers set high expectations, on which we are entitled to live up to.

          You would like to observe our machines under power?

          You do not want to deal with irrelevant circumstances?

          You insist on professional after-sales service?


          Our company guarantees a comprehensive carefree transaction process. We will professionally advise and assist you with word and deeds during the whole duration of the project. Our know-how encompasses a wide range of services ranging from deal-financing though logistics handling over to disassembly or commissioning of the machine at your production site. We are a strong partner, no matter whether it’s at the buying- or selling side!
             

          We stand for reliable used machinery at fair prices and globally satisfied customers.

          Do not hesitate to contact us. We are looking forward to working with you!

          STEINHAND GMBH
          Address:
          Wiehagen 10, D-45472 Muelheim a.d. Ruhr
          Telefon: +49 (0) 208 / 782 39-760
          Fax: +49 (0) 208 / 782 39-685
          Email: info@steinhand.de
          Website: https://www.steinhand.de




          Steinhand GmbH   45527 - Hattingen Am Stahlwerk 15 Deutschland
          Steinhand GmbH

          Am Stahlwerk 15



          Contact Trader


            Steinhand GmbH
           Am Stahlwerk 15
            45527 - Hattingen
            Deutschland
            +49 (0) 2324 / 977 26 - 01
            +49 (0) 2324 / 977 26 - 99
            info@steinhand.de
            www.steinhand.de
            Contact person:

           




          Machine category


          Auswuchtmaschine - Vertikal · Bandsäge · Bearbeitungszentrum 5 Achs · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · CNC Dreh- und Fräszentrum · CNC Dreh- und Schleifzentrum - vertikal · Doppelspindel-Fräsmaschine · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Flachschleifmaschine · Flachschleifmaschine - Vertikal · Kommissionieranlage - Stapler · Kopfdrehbank · Kurvendrehautomat · Langdrehautomat · Portal - Bearbeitungszentrum · Profilschleifmaschine · Rundschleifmaschine - Außen · Schwerdrehmaschine · Vertikaldrehmaschine ·