European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Isabelle Knops Vermittlung & Handel von WZM - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe GEMINIS GHT9 - G2 ~ 1600 x 6000


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-0001 · CNC Lathe

          GEMINIS - GHT9 - G2 ~ 1600 x 6000 - - 2012 - SINUMERIK 840D ShopTurn

          Technical details
          turning diameter 1.600 mm︱turning length 6.000 mm︱control SINUMERIK 840D ShopTurn ︱total power requirement 130 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC Lathe - Horizontal / Brand: GEMINIS / Type: GHT9 G2 ~1600 x 6000 Year of construction: 2012 The machine can be inspected by appointment under power. Condition: Well used, ready for immediate use ! Average 1-shift operation max. TECHNICAL DATA: - Control: Siemens Sinumerik 840 D ShopTurn - Ø Chuck: 1.400 mm - Ø Turning via slide: 1.100 mm - Ø Turning max.: 1.635 mm - Longitudinal travel: 5.930 mm - Cross travel: 830 mm - Peak width: 6.000 mm - Total power requirement: 130 kW - Voltage: 400 V - Frequency: 50 Hz EQUIPMENT: - Steel holder: Quadruple Sauter head - Milling device with Y-axis - Double clamped C-axis (positioning of the face plate) - Grinding device - Cooling through the tool - 3 pcs steady rests - Boring bar - Chip conveyor - Coolant device with pump - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            turning diameter 1.600 mm
            turning length 6.000 mm
            control SINUMERIK 840D ShopTurn
            total power requirement 130 kW
            Description :
            CNC Lathe - Horizontal / Brand: GEMINIS / Type: GHT9 G2 ~1600 x 6000
            Year of construction: 2012

            The machine can be inspected by appointment under power.

            Condition: Well used, ready for immediate use !

            Average 1-shift operation max.

            TECHNICAL DATA:
            - Control: Siemens Sinumerik 840 D ShopTurn

            - Ø Chuck: 1.400 mm
            - Ø Turning via slide: 1.100 mm
            - Ø Turning max.: 1.635 mm
            - Longitudinal travel: 5.930 mm
            - Cross travel: 830 mm
            - Peak width: 6.000 mm

            - Total power requirement: 130 kW
            - Voltage: 400 V
            - Frequency: 50 Hz

            EQUIPMENT:
            - Steel holder: Quadruple Sauter head
            - Milling device with Y-axis
            - Double clamped C-axis (positioning of the face plate)
            - Grinding device
            - Cooling through the tool
            - 3 pcs steady rests
            - Boring bar
            - Chip conveyor
            - Coolant device with pump
            - Documentation
            - CE marking

            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available
            on request.
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe GIANA GFSC 12 CNC


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0294 · Heavy Duty Lathe

          GIANA - GFSC 12 CNC - - 2007 - Sinumerik 840D

          Technical details
          turning diameter over bed 1.200 mm︱turning diameter over slide rest 710 mm︱turning length 7.000 mm︱Control Sinumerik 840D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Heavy duty lathe with milling and grinding function / Brand: GIANA / Type: GFSC 12 CNC / Year of construction: 2007 The machine can be inspected by appointment under working condition. TECHNICAL SPECIFICATIONS: - Turning diameter over bed: 1.200 mm - Turning diameter over slide rest: 710 mm - Turning length: 7.000 mm - CNC Control: SIEMENS SINUMERIK 840D EQUIPMENT/ACCESSORIES: - Cooling lubricant system - Chip conveyor - Various accessories: Steady rests .... There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            turning diameter over bed 1.200 mm
            turning diameter over slide rest 710 mm
            turning length 7.000 mm
            Control Sinumerik 840D
            Description :
            Heavy duty lathe with milling and grinding function / Brand: GIANA /
            Type: GFSC 12 CNC / Year of construction: 2007

            The machine can be inspected by appointment under working condition.

            TECHNICAL SPECIFICATIONS:
            - Turning diameter over bed: 1.200 mm
            - Turning diameter over slide rest: 710 mm
            - Turning length: 7.000 mm

            - CNC Control: SIEMENS SINUMERIK 840D

            EQUIPMENT/ACCESSORIES:
            - Cooling lubricant system
            - Chip conveyor
            - Various accessories: Steady rests ....


            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available on request.
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column CKD-BLANSKO SKD 50 CNC


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0382 · Vertical Turret Lathe - Double Column

          CKD-BLANSKO - SKD 50 CNC - - 1992/2011 - SINUMERIK 840D SL

          Technical details
          faceplate diameter 4.770 mm︱swing diameter 5.300 mm︱turning height 4.000 mm︱Control SINUMERIK 840D SL ︱table load max. 100 t︱z-axis 1.950 mm︱ram head dimension 250 x 250 mm︱total power requirement 100 kW︱weight of the machine ca. 110 t︱dimensions of the machine ca. 13.040 x 11.465 m︱
          Vertical Turret Lathe - Double Column with boring and milling unit and grinding device / Brand: CKD-BLANSKO / Type: SKD 50 CNC / Year of construction: 1992, Retrofit/Modernization: 2011 (Electrical and mechanical overhaul/modernisation) The machine can be inspected by appointment under working condition. Condition: Functional / ready for immediate use. TECHNICAL SPECIFICATIONS: - CNC Control: SINUMERIK 840D SL Working area: - Faceplate diameter: 4.770 mm - Swing diameter: 5.300 mm - Turning height max.: 4.000 mm / max. height without tools: 4.130 mm - Table load max.: 100 tons - Z-axis (RAM): 1.950 mm Crossbeam: - Travel: 3.600 mm - Adjustment speed: 500 mm/min Pick-up Magazine: - 8 Tool holder positions - Automatic clamping of the tool holder in the ram - 1 straight boring head - 1 Angle head, 90°(not in pick-up) - Machine weight approx.: 110 tons There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.
            faceplate diameter 4.770 mm
            swing diameter 5.300 mm
            turning height 4.000 mm
            Control SINUMERIK 840D SL
            table load max. 100 t
            z-axis 1.950 mm
            ram head dimension 250 x 250 mm
            total power requirement 100 kW
            weight of the machine ca. 110 t
            dimensions of the machine ca. 13.040 x 11.465 m
            Description :
            Vertical Turret Lathe - Double Column with boring and milling unit and grinding
            device / Brand: CKD-BLANSKO / Type: SKD 50 CNC / Year of construction: 1992,
            Retrofit/Modernization: 2011 (Electrical and mechanical overhaul/modernisation)

            The machine can be inspected by appointment under working condition.

            Condition: Functional / ready for immediate use.

            TECHNICAL SPECIFICATIONS:
            - CNC Control: SINUMERIK 840D SL

            Working area:
            - Faceplate diameter: 4.770 mm
            - Swing diameter: 5.300 mm
            - Turning height max.: 4.000 mm / max. height without tools: 4.130 mm
            - Table load max.: 100 tons
            - Z-axis (RAM): 1.950 mm

            Crossbeam:
            - Travel: 3.600 mm
            - Adjustment speed: 500 mm/min

            Pick-up Magazine:
            - 8 Tool holder positions
            - Automatic clamping of the tool holder in the ram
            - 1 straight boring head
            - 1 Angle head, 90°(not in pick-up)

            - Machine weight approx.: 110 tons

            There is no guarantee for correctness and completeness of the technical details
            and accessories.

            Detailed technical data sheet and information on equipment available on request.
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column DÖRRIES VCE 140


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0373 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE 140 - - 1982/2004 - SINUMERIK 802D

          Technical details
          faceplate diameter 1.400 mm︱swing diameter 1.580 mm︱turning height 1.000 mm︱Control SINUMERIK 802D ︱total power requirement 60 kW︱weight of the machine ca. 26 t︱dimensions of the machine ca. 3,5 x 3,5 x 5,85 m︱
          Vertical Turret Lathe - Single Column / Brand: DÖRRIES / Type: VCE 140 / Year of construction: 1982, Modernization, CNC control in 2004 The machine can be inspected by appointment under power. Condition: Functional/ ready for operation. TECHNICAL DATA: - Faceplate diameter: 1.400 mm - Swing diameter max.: 1.600 mm - Distance from faceplate to lower edge of chisels holder max.: 1.280 mm - Turning height: 1.000 mm - Crossbeam - adjustability: 810 mm - Support: Number: 1 on the crossbeam Chisel path vertical/horizontal max.: 1.250 / 955 mm Chisel holder for 4 chisels Cross section of the chisels: 40 x 40 mm - CNC Control: Siemens Sinumerik 802D (Retrofit to 802d in 2004 - new plans created and dated ) - Slide cross-section: 340 mm - Faceplate speed range: 1,8 - 200 rpm - Feeds: stepless 0,1 – 1.000 mm/min - Workpiece weight max.: unlimited according to manufacturer - Tool changing device : 1 ram / 4 tools - Total power requirement: 60 kW - Machine weight approx.: 26 tons - Space requirement Width/Depth/Height approx.: 3,5 m x 3,5 m x 5,85 m EQUIPMENT: - Chip conveyor - Coolant device: only for cooling lubrication Without guarantee for completeness and correctness of the technical information and the equipment.
            faceplate diameter 1.400 mm
            swing diameter 1.580 mm
            turning height 1.000 mm
            Control SINUMERIK 802D
            total power requirement 60 kW
            weight of the machine ca. 26 t
            dimensions of the machine ca. 3,5 x 3,5 x 5,85 m
            Description :
            Vertical Turret Lathe - Single Column / Brand: DÖRRIES / Type: VCE 140 /
            Year of construction: 1982, Modernization, CNC control in 2004

            The machine can be inspected by appointment under power.

            Condition: Functional/ ready for operation.

            TECHNICAL DATA:
            - Faceplate diameter: 1.400 mm
            - Swing diameter max.: 1.600 mm
            - Distance from faceplate to lower edge of chisels holder max.: 1.280 mm
            - Turning height: 1.000 mm

            - Crossbeam - adjustability: 810 mm

            - Support:
            Number: 1 on the crossbeam
            Chisel path vertical/horizontal max.: 1.250 / 955 mm
            Chisel holder for 4 chisels
            Cross section of the chisels: 40 x 40 mm

            - CNC Control: Siemens Sinumerik 802D (Retrofit to 802d in 2004 - new plans
            created and dated )
            - Slide cross-section: 340 mm
            - Faceplate speed range: 1,8 - 200 rpm
            - Feeds: stepless 0,1 – 1.000 mm/min
            - Workpiece weight max.: unlimited according to manufacturer
            - Tool changing device : 1 ram / 4 tools
            - Total power requirement: 60 kW
            - Machine weight approx.: 26 tons
            - Space requirement Width/Depth/Height approx.: 3,5 m x 3,5 m x 5,85 m

            EQUIPMENT:
            - Chip conveyor
            - Coolant device: only for cooling lubrication

            Without guarantee for completeness and correctness of the technical information
            and the equipment.
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical DMG MORI CMX 800 V


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0421 · milling machining centers - vertical

          DMG MORI - CMX 800 V - - 2018 - Heidenhain TNC 620

          Technical details
          x-travel 800 mm︱y-travel 560 mm︱z-travel 510 mm︱Control Heidenhain TNC 620 ︱total power requirement 32 kVA︱weight of the machine ca. 5,4 t︱dimensions of the machine ca. m︱
          3 axis Milling Machining Center - Vertical / Brand: DMG MORI / Type: CMX 800 V Year of construction: 2018 Highlights: - 3D-Control technology with the DMG MORI SLIMline Multi-Touch control - C-frame construction with dual support - FEM-optimized cast bed for maximum stiffness - CMX V - Series with highest precision and 12.000 rpm milling spindle - Tool changer with 30 positions with double gripper - Best positioning accuracy of 6 µm (by ISO 13041-4) - 30 m/min Rapid traverse in all axes - Complete automation possibilities with DMG MORI automation solutions The machine can be inspected by appointment under power. Operating hours (14.03.2023): - Control on: 38.332 h - Machine on: 26.444 h - Program run: 6.326 h - Spindle hours: 5.102 h - Toolchange: 266 h MAIN TECHNICAL DATA: CNC Control: Heidenhain TNC 620 Working area Travel range: - X: 800 mm - Y: 560 mm - Z: 510 mm - Distance spindle nose table: 120 - 630 mm - Clamping surface table X/Y: 1.100 x 560 mm with 5 T-Slots, 100 mm distance (Medium slot 18H7 and 4 slots 18H12) - Table load max.: 800 kg Main drive: - Drive type: digitally controlled AC motor with hollow shaft directly on work spindle - Speed range: 20 - 12.000 rpm - Drive power: 13 kW (40% ED), 9 kW (100% ED) - Spindle torque: 83 Nm (40% ED), 57 Nm (100% ED) - Tool pull-in force: 9 kN - Tool holder: SK40, DIN 69871 for tightening bolt DIN 69872 Clamping takes place via spring assembly, the release cylinder is pneumatically actuated Tool magazine Design: Tool magazine with double gripper. Programming and control Tool change by controlling the machine. Loading and unloading through the spindle. - Storage locations: 30 positions SK40 - Permissible tool diameter: 80 mm (130 mm in case of free neighboring places) - Permissible tool length: 300 mm (from spindle nose) - Permissible tool weight: 8 kg - Tool change time: 2,4 s (for tools with Ø < 80 mm without tool door) - Average chip-to-chip time: 6,7 s ( for tools with Ø < 80 mm without tool door) - Average chip-to-chip time: 9,7 s ( for tools with Ø < 80 mm with tool door) Note: For speeds above 12.000 rpm the tool holders and tools a balance degree of G6,3. For tools weighing more than 5 kg, a balance grade of G2,5 is required. The following tool dimensions should be selected: - Up to 8.000 rpm: max. tool length 300 mm, max. tool diameter 130 mm - Up to 10.000 rpm: max. tool length 250 mm, max. tool diameter 100 mm - Up to 12.000 rpm: max. tool length 250 mm, max. tool diameter 80 mm Feed drives: - Drive type: digitally controlled AC motor on ball screws X,Y,Z axis - Feed rate (X,Y,Z): max. 30 m/min - Rapid traverse speed ((X,Y,Z): 30 m/min - Max. Feed force (40% ED) (X,Y,Z): 5 kN Linear measuring systems: - Bidirectional position accuracy: A = 6µm (according to ISO 10791-4) - Bidirectional repeatability of the position: R = 5 µm (according to ISO 10791-4) EQUIPMENT: - Cooling lubricant system with paper belt filter, Tank capacity: 600 l, 40 bar - Tool measurement, Renishaw OTS - Workpiece measurement, probe Renishaw - Electronic hand wheel - Chip conveyor - Exhaustion - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -
            x-travel 800 mm
            y-travel 560 mm
            z-travel 510 mm
            Control Heidenhain TNC 620
            total power requirement 32 kVA
            weight of the machine ca. 5,4 t
            Description :
            3 axis Milling Machining Center - Vertical / Brand: DMG MORI / Type: CMX 800 V
            Year of construction: 2018

            Highlights:
            - 3D-Control technology with the DMG MORI SLIMline Multi-Touch control
            - C-frame construction with dual support - FEM-optimized cast bed for maximum
            stiffness
            - CMX V - Series with highest precision and 12.000 rpm milling spindle
            - Tool changer with 30 positions with double gripper
            - Best positioning accuracy of 6 µm (by ISO 13041-4)
            - 30 m/min Rapid traverse in all axes
            - Complete automation possibilities with DMG MORI automation solutions

            The machine can be inspected by appointment under power.

            Operating hours (14.03.2023):
            - Control on: 38.332 h
            - Machine on: 26.444 h
            - Program run: 6.326 h
            - Spindle hours: 5.102 h
            - Toolchange: 266 h

            MAIN TECHNICAL DATA:
            CNC Control: Heidenhain TNC 620

            Working area
            Travel range:
            - X: 800 mm
            - Y: 560 mm
            - Z: 510 mm

            - Distance spindle nose table: 120 - 630 mm

            - Clamping surface table X/Y: 1.100 x 560 mm
            with 5 T-Slots, 100 mm distance
            (Medium slot 18H7 and 4 slots 18H12)

            - Table load max.: 800 kg

            Main drive:
            - Drive type: digitally controlled AC motor with hollow shaft directly on work
            spindle

            - Speed range: 20 - 12.000 rpm

            - Drive power: 13 kW (40% ED), 9 kW (100% ED)

            - Spindle torque: 83 Nm (40% ED), 57 Nm (100% ED)

            - Tool pull-in force: 9 kN

            - Tool holder: SK40, DIN 69871 for tightening bolt DIN 69872
            Clamping takes place via spring assembly, the release
            cylinder is pneumatically actuated

            Tool magazine
            Design: Tool magazine with double gripper.
            Programming and control Tool change by controlling the machine. Loading
            and unloading through the spindle.

            - Storage locations: 30 positions SK40
            - Permissible tool diameter: 80 mm (130 mm in case of free neighboring places)
            - Permissible tool length: 300 mm (from spindle nose)
            - Permissible tool weight: 8 kg
            - Tool change time: 2,4 s
            (for tools with Ø < 80 mm without tool door)
            - Average chip-to-chip time: 6,7 s ( for tools with Ø < 80 mm without tool door)
            - Average chip-to-chip time: 9,7 s ( for tools with Ø < 80 mm with tool door)

            Note:
            For speeds above 12.000 rpm the tool holders and tools a balance degree of
            G6,3. For tools weighing more than 5 kg, a balance grade of G2,5 is required.
            The following tool dimensions should be selected:
            - Up to 8.000 rpm: max. tool length 300 mm, max. tool diameter 130 mm
            - Up to 10.000 rpm: max. tool length 250 mm, max. tool diameter 100 mm
            - Up to 12.000 rpm: max. tool length 250 mm, max. tool diameter 80 mm

            Feed drives:
            - Drive type: digitally controlled AC motor on ball screws X,Y,Z axis
            - Feed rate (X,Y,Z): max. 30 m/min
            - Rapid traverse speed ((X,Y,Z): 30 m/min
            - Max. Feed force (40% ED) (X,Y,Z): 5 kN

            Linear measuring systems:
            - Bidirectional position accuracy: A = 6µm (according to ISO 10791-4)
            - Bidirectional repeatability of the position: R = 5 µm (according to
            ISO 10791-4)

            EQUIPMENT:
            - Cooling lubricant system with paper belt filter,
            Tank capacity: 600 l, 40 bar
            - Tool measurement, Renishaw OTS
            - Workpiece measurement, probe Renishaw
            - Electronic hand wheel
            - Chip conveyor
            - Exhaustion
            - Documentation
            - CE marking

            There is no guarantee for correctness and completeness of the technical details
            and accessoires. - Subject to prior sale -
          Datasheet
          Request / Contact
          used  milling machining centers - vertical MORI SEIKI NMV 5000 DCG


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0422 · milling machining centers - vertical

          MORI SEIKI - NMV 5000 DCG - - 07/2009 - MSX 711 MAPPS III

          Technical details
          x-travel 730 mm︱y-travel 510 mm︱z-travel 510 mm︱Control MSX 711 MAPPS III ︱total power requirement 43 kVA︱weight of the machine ca. 13 t︱dimensions of the machine ca. 3,8 x 2,7 x 3,3 m︱
          5-axis-Milling Machining Center - Vertical / Brand: DMG MORI SEIKI / Type: NMV 5000 DCG / Year of construction: 07/2009 The machine can be inspected by appointment under working condition. Operating (24.03.2023): - Operating time: 11.077 h - Processing time: 6.580 h TECHNICAL SPECIFICATIONS: - CNC Control: Fanuc MSX 711 MAPPS-III Travels: - X-axis: 730 mm - Y-axis: 510 mm - Z-axis: 510 mm - B-axis: + 160° - 180° - C-axis: 360° Milling spindle: - Spindle speed max.: 20.000 rpm - Drive power: 22/11 kW (30min/continuous operation) - Torque: 118/98/80 Nm (25% ED/15 min/continuous operation) - Rapid traverse X/Y/Z: 50/50/40 m/min Working table: - Table diameter: 500 mm - Table load max.: 300 kg - Workpiece dimensions max.: Ø 700 x 450 mm Tool magazine: - Magazine positions: 61, BT40 with plan system - Tool diameter max.: 90/125 mm (without/with adjacent tools) - Tool length max.: 300 mm - Tool weight max.: 8 kg - Tool change time: 1,8 sec. - Tool holder: SK40 - Total power requirement: 43 kVA - Machine weight approx.: 13 tons - Dimensions Length/Width/Height: 3.817 x 2.691 x 3.264 mm EQUIPMENT/ACCESSORIES: - Chain magazine with 61 positions - Direct path measuring system in the X, Y and Z axis - Mobile control unit ( hand wheel & axis selector switch) for moving the axes - Spindle sensor measuring system with optical signal transmission, RENISHAW - RENISHAW table sensor measuring system & tool adjuster (length & Ø) - Extension of the program memory capacity to 1MB, max. 1000 programs - Memory card for Data Server, CF card 1GB + ATA adapter - Internal coolant supply, Form A (in the center) - Interface for connecting a high-pressure coolant system 70 bar - KNOLL compact filter KF 110/500 including high pressure pump 70 bar-17 l/min- 5,5 kW - Chip conveyor hinged belt with drum filter, rear ejection - Coolant gun for rinsing a workpiece - Coolant shower in the machining area - Milling of pockets and islands - Tool life management - 3-D coordinate conversion - 48 workpiece zero points - Program restart - Fast fixed cycles - Transformer - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -
            x-travel 730 mm
            y-travel 510 mm
            z-travel 510 mm
            Control MSX 711 MAPPS III
            total power requirement 43 kVA
            weight of the machine ca. 13 t
            dimensions of the machine ca. 3,8 x 2,7 x 3,3 m
            Description :
            5-axis-Milling Machining Center - Vertical / Brand: DMG MORI SEIKI /
            Type: NMV 5000 DCG / Year of construction: 07/2009

            The machine can be inspected by appointment under working condition.

            Operating (24.03.2023):
            - Operating time: 11.077 h
            - Processing time: 6.580 h

            TECHNICAL SPECIFICATIONS:
            - CNC Control: Fanuc MSX 711 MAPPS-III

            Travels:
            - X-axis: 730 mm
            - Y-axis: 510 mm
            - Z-axis: 510 mm
            - B-axis: + 160° - 180°
            - C-axis: 360°

            Milling spindle:
            - Spindle speed max.: 20.000 rpm
            - Drive power: 22/11 kW (30min/continuous operation)
            - Torque: 118/98/80 Nm (25% ED/15 min/continuous operation)

            - Rapid traverse X/Y/Z: 50/50/40 m/min

            Working table:
            - Table diameter: 500 mm
            - Table load max.: 300 kg
            - Workpiece dimensions max.: Ø 700 x 450 mm

            Tool magazine:
            - Magazine positions: 61, BT40 with plan system
            - Tool diameter max.: 90/125 mm (without/with adjacent tools)
            - Tool length max.: 300 mm
            - Tool weight max.: 8 kg
            - Tool change time: 1,8 sec.
            - Tool holder: SK40

            - Total power requirement: 43 kVA
            - Machine weight approx.: 13 tons
            - Dimensions Length/Width/Height: 3.817 x 2.691 x 3.264 mm

            EQUIPMENT/ACCESSORIES:
            - Chain magazine with 61 positions
            - Direct path measuring system in the X, Y and Z axis
            - Mobile control unit ( hand wheel & axis selector switch) for moving the axes
            - Spindle sensor measuring system with optical signal transmission, RENISHAW
            - RENISHAW table sensor measuring system & tool adjuster (length & Ø)
            - Extension of the program memory capacity to 1MB, max. 1000 programs
            - Memory card for Data Server, CF card 1GB + ATA adapter
            - Internal coolant supply, Form A (in the center)
            - Interface for connecting a high-pressure coolant system 70 bar
            - KNOLL compact filter KF 110/500 including high pressure pump 70 bar-17 l/min-
            5,5 kW
            - Chip conveyor hinged belt with drum filter, rear ejection
            - Coolant gun for rinsing a workpiece
            - Coolant shower in the machining area
            - Milling of pockets and islands
            - Tool life management
            - 3-D coordinate conversion
            - 48 workpiece zero points
            - Program restart
            - Fast fixed cycles
            - Transformer
            - Documentation
            - CE marking

            There is no guarantee for correctness and completeness of the technical details
            and accessoires. - Subject to prior sale -
          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used  Planer-Type Milling M/C - Double Column STANKOIMPORT MS 620 F4


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0371 · Planer-Type Milling M/C - Double Column

          STANKOIMPORT - MS 620 F4 - - 1984/2005 - Heidenhain iTNC 530

          Technical details
          x-travel 6.600 mm︱y-travel 3.000 mm︱z-travel 1.300 mm︱Control Heidenhain iTNC 530 ︱total power requirement 75 kW︱weight of the machine ca. t︱dimensions of the machine ca. 17,10 x 7,35 x 5,86 m︱
          Planer-Type Milling M/C - Double Column / Brand: STANKOIMPORT / Type: MS 620 F4 Year of construction: 1984 / Retrofit/General overhaul in 2005 (Mechanical- geometrical overhaul, modernisation of mechanics and control system carried out by a German company). Condition: Functional / ready for operation. The machine can be inspected by appointment under power/in operation. TECHNICAL DATA: - Table pallet path (X-axis): 6.600 mm - Milling slide path (Y-axis): 3.000 mm - Milling slide stroke (Z-axis): 1.300 mm - Gantry passage: Width: 3.000 m Height: 1.700 mm - Table clamping surface: 2.500 mm x 6.000 mm - Distance over clamping surface to spindle approx.: 1.600 mm - Feed drive power: X-axis: 79,0 Nm, 1.500 rpm Y-axis: 79,0 Nm, 1.500 rpm Z-axis: 41,0 Nm, 1.500 rpm - Speed: 800 - 1.600 rpm - Main spindle drive (maintenance-free AC servo main spindle drive, brand: Siemens, Type: 1PH7) Continuous operating data: 678 Nm, 71 kW, 1.000 rpm (max. 3.100 rpm) Short-term operating data: 840 Nm, 88 kW (can be used with a duty cycle of ED=60 % can be used, playing time limited to 10 min.) - Tool holder: SK60, DIN 2080, incl. adapter to SK50 - Quality: +/- 0,015 mm/m - Surface finish: up to Ra 0,8 - Workpiece weight max.: 18 tons - Total power requirement: 75 kW EQUIPMENT: - 3 pieces of milling heads (siehe Fotos) - CNC Control: Heidenhain TNCi530 (for the axes X: Table, Y: Support, Z:Slider) - Electronic hand wheel, Heidenhain HR 410 - Measuring system - Main spindle with incremental encoder, brand: Heidenhain, Type: ROD 486 equipped (indirect displacement measurement) - Control panel - Chip conveyor - Cooling lubricant system, tank capacity: approx. 2.000 l - Documentation, electrical circuit diagrams available There is no guarantee for correctness and completeness of the technical details and accessoires.
            x-travel 6.600 mm
            y-travel 3.000 mm
            z-travel 1.300 mm
            Control Heidenhain iTNC 530
            total power requirement 75 kW
            dimensions of the machine ca. 17,10 x 7,35 x 5,86 m
            Description :
            Planer-Type Milling M/C - Double Column / Brand: STANKOIMPORT / Type: MS 620 F4
            Year of construction: 1984 / Retrofit/General overhaul in 2005 (Mechanical-
            geometrical overhaul, modernisation of mechanics and control system carried out
            by a German company).

            Condition: Functional / ready for operation.

            The machine can be inspected by appointment under power/in operation.

            TECHNICAL DATA:
            - Table pallet path (X-axis): 6.600 mm
            - Milling slide path (Y-axis): 3.000 mm
            - Milling slide stroke (Z-axis): 1.300 mm
            - Gantry passage: Width: 3.000 m
            Height: 1.700 mm
            - Table clamping surface: 2.500 mm x 6.000 mm
            - Distance over clamping surface to spindle approx.: 1.600 mm

            - Feed drive power:
            X-axis: 79,0 Nm, 1.500 rpm
            Y-axis: 79,0 Nm, 1.500 rpm
            Z-axis: 41,0 Nm, 1.500 rpm

            - Speed: 800 - 1.600 rpm

            - Main spindle drive (maintenance-free AC servo main spindle drive, brand:
            Siemens, Type: 1PH7)
            Continuous operating data: 678 Nm, 71 kW, 1.000 rpm (max. 3.100 rpm)
            Short-term operating data: 840 Nm, 88 kW (can be used with a duty cycle of
            ED=60 % can be used, playing time limited to 10 min.)

            - Tool holder: SK60, DIN 2080, incl. adapter to SK50
            - Quality: +/- 0,015 mm/m
            - Surface finish: up to Ra 0,8
            - Workpiece weight max.: 18 tons

            - Total power requirement: 75 kW

            EQUIPMENT:
            - 3 pieces of milling heads (siehe Fotos)
            - CNC Control: Heidenhain TNCi530
            (for the axes X: Table, Y: Support, Z:Slider)
            - Electronic hand wheel, Heidenhain HR 410
            - Measuring system
            - Main spindle with incremental encoder, brand: Heidenhain,
            Type: ROD 486 equipped (indirect displacement measurement)
            - Control panel
            - Chip conveyor
            - Cooling lubricant system, tank capacity: approx. 2.000 l

            - Documentation, electrical circuit diagrams available

            There is no guarantee for correctness and completeness of the technical details
            and accessoires.

          Datasheet
          Request / Contact

          Cylindrical Grinding Machine - Universal

          used  Cylindrical Grinding Machine - Universal STUDER S 65 CNC


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0417 · Cylindrical Grinding Machine - Universal

          STUDER - S 65 CNC - - 1995 - Fanuc 16 GC

          Technical details
          grinding diameter 650 mm︱grinding length 1.300 mm︱centre height 330 mm︱Control Fanuc 16 GC ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Cylindrical Grinding Machine - Universal / Brand: studer / Type: S65 CNC / Year of construction: 1995 The machine can be inspected by appointment under power. Condition: Well used, functional and ready for immediate use. TECHNICAL DATA: Main dimensions - Grinding length: 1.300 mm - Center height:330 mm - Peak width: 1.800 mm Cross slide - Longitudinal axis Z-path max.: 1.570 mm * Speed: 0 - 10.000 mm/min * Resolution: 0,0001 mm - Cross axis X-path max.: 400 mm * Speed: 0 - 10.000 mm/min * Resolution: 0,0001 mm Grinding headstock right/right 2 frequency motor spindles 100 Nm, protective hoods, coolant devices and grinding wheel changing aid. Max. Wheel width 100 mm (F1 and F5). Peripheral speed max. 50 m/s. Swivel range - 45° to + 300° (only with grinding wheel diameter 600 mm). Workpiece headstock - Speed range: 15 - 1.000 rpm - Drive power: 5 kW - Spindle torque: 68 Nm - Circumferential positioning unit for grinding between centers and mounting cone: MK 4 - Max. Workpiece weight: 500 kg - Fly loop unit * Mounting cone: MK 6 Tailstock - Mounting cone: MK 4 - Pinole path/stroke: 60 mm Guaranteed working accuracy - Straightness of the surface line * Measuring length 1.400 mm: 0,005 mm CNC Control: Fanuc 16 GC EQUIPMENT: - Internal grinding spindle Ø: 80 x 350 mm - Internal grinding spindle Ø: 80 x 450 mm - Internal grinding spindle Ø: 80 x 500 mm - 3-jaw chuck: 250 mm - Circular magnet Ø: 450 mm - Circular magnet Ø: 500 mm - Steady rest Ø: 150 mm - Steady rest Ø: 250 mm - Various grinding wheels with flange - Wet grinding device with paper belt filter There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale.
            grinding diameter 650 mm
            grinding length 1.300 mm
            centre height 330 mm
            Control Fanuc 16 GC
            Description :
            Cylindrical Grinding Machine - Universal / Brand: studer / Type: S65 CNC /
            Year of construction: 1995

            The machine can be inspected by appointment under power.

            Condition: Well used, functional and ready for immediate use.

            TECHNICAL DATA:
            Main dimensions
            - Grinding length: 1.300 mm
            - Center height:330 mm
            - Peak width: 1.800 mm

            Cross slide
            - Longitudinal axis Z-path max.: 1.570 mm
            * Speed: 0 - 10.000 mm/min
            * Resolution: 0,0001 mm
            - Cross axis X-path max.: 400 mm
            * Speed: 0 - 10.000 mm/min
            * Resolution: 0,0001 mm

            Grinding headstock right/right
            2 frequency motor spindles 100 Nm, protective hoods, coolant devices and
            grinding wheel changing aid. Max. Wheel width 100 mm (F1 and F5).
            Peripheral speed max. 50 m/s.
            Swivel range - 45° to + 300° (only with grinding wheel diameter 600 mm).

            Workpiece headstock
            - Speed range: 15 - 1.000 rpm
            - Drive power: 5 kW
            - Spindle torque: 68 Nm
            - Circumferential positioning unit for grinding between centers
            and mounting cone: MK 4
            - Max. Workpiece weight: 500 kg
            - Fly loop unit
            * Mounting cone: MK 6

            Tailstock
            - Mounting cone: MK 4
            - Pinole path/stroke: 60 mm

            Guaranteed working accuracy
            - Straightness of the surface line
            * Measuring length 1.400 mm: 0,005 mm

            CNC Control: Fanuc 16 GC

            EQUIPMENT:
            - Internal grinding spindle Ø: 80 x 350 mm
            - Internal grinding spindle Ø: 80 x 450 mm
            - Internal grinding spindle Ø: 80 x 500 mm
            - 3-jaw chuck: 250 mm
            - Circular magnet Ø: 450 mm
            - Circular magnet Ø: 500 mm
            - Steady rest Ø: 150 mm
            - Steady rest Ø: 250 mm
            - Various grinding wheels with flange
            - Wet grinding device with paper belt filter


            There is no guarantee for correctness and completeness of the technical details
            and accessoires. - Subject to prior sale.
          Datasheet
          Request / Contact

          Flaring Cup Wheel Grinding Machine

          used  Flaring Cup Wheel Grinding Machine DELTA LF 350


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0412 · Flaring Cup Wheel Grinding Machine

          DELTA - LF 350 - - -

          Technical details
          workpiece length 360 mm︱work piece width 155 mm︱workpiece height 280 mm︱range L-W-H 1.050 x 950 x 1.750 mm︱total power requirement 3,0 kW︱weight of the machine ca. 550 kg︱
          Flaring Cup Wheel Grinding Machine - Horizontal / Brand: DELTA / Type: LF 350 Baujahr: The machine can be inspected by appointment in the factory. Technical data: - Grinding length: 360 mm - Grinding width: 155 mm - Workpiece height: 280 mm - Spindle speeds: 2.840 rpm - Grinding wheel dimension: Ø 200 x 80 x 78 mm - Total power requirement: 3,0 KW - Machine weight approx.: 550 kg - Dimensions Length-Width-Height: 1.050 x 950 x 1.750 mm - Electric magnetic clamping plate: 200 x 300 x 75 mm - SD 20-30 Magnetic table - Instruction manual There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale.
            workpiece length 360 mm
            work piece width 155 mm
            workpiece height 280 mm
            range L-W-H 1.050 x 950 x 1.750 mm
            total power requirement 3,0 kW
            weight of the machine ca. 550 kg
            Description :
            Flaring Cup Wheel Grinding Machine - Horizontal / Brand: DELTA / Type: LF 350
            Baujahr:

            The machine can be inspected by appointment in the factory.

            Technical data:
            - Grinding length: 360 mm
            - Grinding width: 155 mm
            - Workpiece height: 280 mm
            - Spindle speeds: 2.840 rpm
            - Grinding wheel dimension: Ø 200 x 80 x 78 mm

            - Total power requirement: 3,0 KW
            - Machine weight approx.: 550 kg
            - Dimensions Length-Width-Height: 1.050 x 950 x 1.750 mm

            - Electric magnetic clamping plate: 200 x 300 x 75 mm
            - SD 20-30 Magnetic table

            - Instruction manual

            There is no guarantee for correctness and completeness of the technical details
            and accessoires. - Subject to prior sale.
          Datasheet
          Request / Contact

          Tool Grinder - Universal

          used  Tool Grinder - Universal SCHÜTTE 305 linear


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0414 · Tool Grinder - Universal

          SCHÜTTE - 305 linear - - 2010 -

          Technical details
          max. grinding diameter 235 mm︱grinding length 570 mm︱workpiece length 570 mm︱dimensions of machine 1.840 x 1.718 x 1.986 mm︱total power requirement 25 kW︱weight of the machine ca. 3,5 t︱
          5 Axis CNC Grinding Machine / Brand: SCHÜTTE / Type: 305 linear Year of construction: 2010 The machine can be inspected by appointment under working condition. Operating hours (16.02.2023): 27.511 h The machine was used manless and exclusively for finishing (regrinding), is, however, clearly designed for production. According to the maintenance manager, the guideways in the X/Y and Z axes are to be replaced in the X/Y and Z axes, as well as the overhaul of the grinding head. TECHNICAL DATA: Linear axes (backlash-free, temperature-controlled AC direct drive with closed control loop) - X-Achse (Longitudinal movement): 400 mm with tailstock* max.: 400* mm - Y-axis (Cross movement): 250 mm - Z-axis (Vertical movement): 250 mm - Resolution X-, Y-, Z-axis: < 0,0001 mm Rotation axis, Universal rotation axis* (A-axis) (backlash-free, temperature-controlled AC direct drive with closed control loop) - Resolution A-axis: < 0,0001 degree - Speed range rotation axis: 0 - +/- 200 rpm - Speed range Universal rotation axis*: 0 - +/- 2.500 rpm - DIN 2080: Steep cone 50 - Torque: 48 Nm - Workpiece clamping device: manual / pneumatic* Swivelling axis (C-axis) (backlash-free, temperature-controlled AC direct drive with closed control loop) - Swiveling range: 225 degree - Resolution: < 0,0002 degree - Swivel speed: 360 degree/s Feed rates - X-axis: 0,1 - 48.000 mm/min - Y-axis: 0,1 - 24.000 mm/min - Z-axis: 0,1 - 24.000 mm/min Speed-up - X-axis: 10 m/s2 - Y-axis: 5 m/s2 - Z-axis: 5 m/s2 Grinding spindle - Speed: 0 - +/- 12.000 rpm - Motor spindle drive power, Pmax: 15 kW - Shank taper: Hollow shank taper HSK 50E - Grinding wheel holder clamping system: pneumatic - Clamping system for cooling lubricant distributor arm spindle housing: pneumatic Clamping dimensions - Clamping length between centers at max. stroke: 570 mm - max. Workpiece diameter to be processed: 235 mm - Center height above floor: 1.100 mm Grinding wheel magazine - Number of mandrel positions in the magazine: 5 pieces Total weight machine: 3.5 tons Dimensions - Width: 1.840 mm - Depth (without swiveling control panel): 1.718 mm - Height: 1.986 mm Electrical connected load: 25 kVA Compressed air supply - Minimum pressure: 6 bar - Minimum flow rate: 180 l/min Control: - Machine control: Siemens Sinumerik 840 D (HMI advanceed) - Operator interfaces: SIGS - Schütte Integrated Grinding Software EQUIPMENT: - Direct drives in all linear axes - Direct drives in all rotational axes - Direct displacement measuring systems in the axes X, Y and Z - automatic 5-fold grinding wheel changer with own NC-drive and coolant manifold, for grinding wheels and coolant manifold, collision monitored - Central lubrication ACCESSORIES: - 1 piece of Tool loader with 5 grinding wheels - 1 piece of Workpiece- / Milling loader with approx. 40 positions - 5 pcs grinding wheel holders - 5 pcs Coolant holders - 1 pc.Adjustment aid for coolant nozzles (external clamping device with template) - Collet chucks - Measuring probe; brand: HEIDENHAIN for measuring the machine - Inclined bed belt filter, brand: POLO, flow rate: max. 220 l/min, Capacity: approx. 480 l - Cooling unit with approx. 7 kW cooling capacity (flow-through cooler for oil recooling) - Oil mist cutter, brand: DELBAG - Documentation - CE-marking The 2 oil pans are not included in the sale. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale.
            max. grinding diameter 235 mm
            grinding length 570 mm
            workpiece length 570 mm
            dimensions of machine 1.840 x 1.718 x 1.986 mm
            total power requirement 25 kW
            weight of the machine ca. 3,5 t
            Description :
            5 Axis CNC Grinding Machine / Brand: SCHÜTTE / Type: 305 linear
            Year of construction: 2010

            The machine can be inspected by appointment under working condition.

            Operating hours (16.02.2023): 27.511 h

            The machine was used manless and exclusively for finishing (regrinding), is,
            however, clearly designed for production.

            According to the maintenance manager, the guideways in the X/Y and Z axes are
            to be replaced in the X/Y and Z axes, as well as the overhaul of the grinding
            head.

            TECHNICAL DATA:
            Linear axes
            (backlash-free, temperature-controlled AC direct drive with closed control loop)
            - X-Achse (Longitudinal movement): 400 mm
            with tailstock* max.: 400* mm
            - Y-axis (Cross movement): 250 mm
            - Z-axis (Vertical movement): 250 mm
            - Resolution X-, Y-, Z-axis: < 0,0001 mm

            Rotation axis, Universal rotation axis* (A-axis)
            (backlash-free, temperature-controlled AC direct drive with closed control loop)
            - Resolution A-axis: < 0,0001 degree
            - Speed range rotation axis: 0 - +/- 200 rpm
            - Speed range Universal rotation axis*: 0 - +/- 2.500 rpm
            - DIN 2080: Steep cone 50
            - Torque: 48 Nm
            - Workpiece clamping device: manual / pneumatic*

            Swivelling axis (C-axis)
            (backlash-free, temperature-controlled AC direct drive with closed control loop)
            - Swiveling range: 225 degree
            - Resolution: < 0,0002 degree
            - Swivel speed: 360 degree/s

            Feed rates
            - X-axis: 0,1 - 48.000 mm/min
            - Y-axis: 0,1 - 24.000 mm/min
            - Z-axis: 0,1 - 24.000 mm/min

            Speed-up
            - X-axis: 10 m/s2
            - Y-axis: 5 m/s2
            - Z-axis: 5 m/s2

            Grinding spindle
            - Speed: 0 - +/- 12.000 rpm
            - Motor spindle drive power, Pmax: 15 kW
            - Shank taper: Hollow shank taper HSK 50E
            - Grinding wheel holder clamping system: pneumatic
            - Clamping system for cooling lubricant distributor arm spindle housing:
            pneumatic

            Clamping dimensions
            - Clamping length between centers at max. stroke: 570 mm
            - max. Workpiece diameter to be processed: 235 mm
            - Center height above floor: 1.100 mm

            Grinding wheel magazine
            - Number of mandrel positions in the magazine: 5 pieces

            Total weight machine: 3.5 tons

            Dimensions
            - Width: 1.840 mm
            - Depth (without swiveling control panel): 1.718 mm
            - Height: 1.986 mm

            Electrical connected load: 25 kVA

            Compressed air supply
            - Minimum pressure: 6 bar
            - Minimum flow rate: 180 l/min

            Control:
            - Machine control: Siemens Sinumerik 840 D (HMI advanceed)
            - Operator interfaces: SIGS - Schütte Integrated Grinding Software

            EQUIPMENT:
            - Direct drives in all linear axes
            - Direct drives in all rotational axes
            - Direct displacement measuring systems in the axes X, Y and Z
            - automatic 5-fold grinding wheel changer with own NC-drive
            and coolant manifold, for grinding wheels and coolant manifold,
            collision monitored
            - Central lubrication

            ACCESSORIES:
            - 1 piece of Tool loader with 5 grinding wheels
            - 1 piece of Workpiece- / Milling loader with approx. 40 positions
            - 5 pcs grinding wheel holders
            - 5 pcs Coolant holders
            - 1 pc.Adjustment aid for coolant nozzles (external clamping device with
            template)
            - Collet chucks
            - Measuring probe; brand: HEIDENHAIN for measuring the machine
            - Inclined bed belt filter, brand: POLO, flow rate: max. 220 l/min,
            Capacity: approx. 480 l
            - Cooling unit with approx. 7 kW cooling capacity (flow-through cooler for oil
            recooling)
            - Oil mist cutter, brand: DELBAG
            - Documentation
            - CE-marking

            The 2 oil pans are not included in the sale.

            There is no guarantee for correctness and completeness of the technical details
            and accessoires. - Subject to prior sale.

          Datasheet
          Request / Contact

          Plate Bending Machine - 3 Rolls

          used  Plate Bending Machine - 3 Rolls FASTI 109 / 28


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0405 · Plate Bending Machine - 3 Rolls

          FASTI - 109 / 28 - - -

          Technical details
          sheet width 2.040 mm︱plate thickness 12 bei/at 40 kp/mm2 mm︱pre-bending ca. 80% d. Biegeleistung ︱total power requirement 11 kW︱weight of the machine ca. 4,5 t︱dimensions of the machine ca. 3,45 x 1,1 x 1,4 m︱
          Plate Bending Machine - 3 Rolls / Brand: FASTI / Type: 109 / 28 Year of construction: 05/1971 The machine can be inspected by appointment. Operational state / ready for use. Technical data: - Sheet width / roll length: 2.040 mm - Bending capacity: 12 mm at 40 kp/mm2 - Bending capacity approx.: 80% of the bending capacity - Top roll diameter: 225 mm - Back roll diameter: 225 mm - Bottom roll diameter: 225 mm - Motor power main drive: 11 kW - Motor power Rear roller drive: 4 kW - Machine weight approx.: 4,5 tons - Space requirement approx.: 3,45 x 1,1 x 1,4 m Equipment: - 2-roll drive - Motorized feed of the rear roller - Foot switch - EMERGENCY STOP The machine is adjusted manually. Supplementary information: An inspection/maintenance was carried out annually by the company's maintenance personnel. The machine has not been overhauled. The pull rope switch was only retrofitted for safety reasons. Without guarantee for completeness and correctness of the technical information and the equipment.
            sheet width 2.040 mm
            plate thickness 12 bei/at 40 kp/mm2 mm
            pre-bending ca. 80% d. Biegeleistung
            total power requirement 11 kW
            weight of the machine ca. 4,5 t
            dimensions of the machine ca. 3,45 x 1,1 x 1,4 m
            Description :
            Plate Bending Machine - 3 Rolls / Brand: FASTI / Type: 109 / 28
            Year of construction: 05/1971

            The machine can be inspected by appointment.

            Operational state / ready for use.

            Technical data:
            - Sheet width / roll length: 2.040 mm
            - Bending capacity: 12 mm at 40 kp/mm2
            - Bending capacity approx.: 80% of the bending capacity
            - Top roll diameter: 225 mm
            - Back roll diameter: 225 mm
            - Bottom roll diameter: 225 mm
            - Motor power main drive: 11 kW
            - Motor power Rear roller drive: 4 kW
            - Machine weight approx.: 4,5 tons
            - Space requirement approx.: 3,45 x 1,1 x 1,4 m

            Equipment:
            - 2-roll drive
            - Motorized feed of the rear roller
            - Foot switch
            - EMERGENCY STOP

            The machine is adjusted manually.

            Supplementary information:
            An inspection/maintenance was carried out annually by the company's maintenance
            personnel.
            The machine has not been overhauled.
            The pull rope switch was only retrofitted for safety reasons.

            Without guarantee for completeness and correctness of the technical information
            and the equipment.
          Datasheet
          Request / Contact

          Floor Plates

          used  Floor Plates


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0161 · Floor Plates

          - - - -

          Technical details
          length 6.060 mm︱width 2.540 mm︱number 2 Stück/pieces︱total wight à 63,5 t︱
          2 pieces floor-/mounting-/foundation plates made of cast. The surfaces are plane-milled. The plates can be inspected by appointment in the factory. Specifications: Length: à 6.060 mm Width: à 2.540 mm Total weight approx.: à 63,5 t
            length 6.060 mm
            width 2.540 mm
            number 2 Stück/pieces
            total wight à 63,5 t
            Description :
            2 pieces floor-/mounting-/foundation plates made of cast.

            The surfaces are plane-milled.

            The plates can be inspected by appointment in the factory.

            Specifications:
            Length: à 6.060 mm
            Width: à 2.540 mm
            Total weight approx.: à 63,5 t
          Datasheet
          Request / Contact

          millinghead vertical

          used  millinghead vertical SCHIESS-FRORIEP


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0411 · millinghead vertical

          SCHIESS-FRORIEP - - - 1993 -

          Technical details
          inner taper of milling spindel ISO 50 ︱collet diameter ....... ︱turning speed range 1:2 - 800 U/min︱drive motor 37 kW︱weight of the machine ca. 1,3 t︱
          2-axis NC fork head with pick-up station for automatic pick-up and deposit. Brand: Schiess-Froriep / Year of construction: 1993 Technical data: - Translation ratio: 1:2 - Outreach: 500/800 mm - Torque max.: 2.800 Nm - Drive: 37 kW - Tool holder: ISO 50 - Swivel range A-axis: 180° - Swivel range B-axis: 360° - Feed rate max.: 360°/min - Rapid traverse of both axes max.: 360°/min - Speed max. 1:2: 800 rpm - Feed drives: Siemens - Head clamping: Hirth serration The head was designed for mounting on Schiess-Froriep large portal milling machines of the assemblies 40-50 FZT, 40-50 FZG as well as vertical lathes of the assemblies 50-63, 80/100 DV, DZ, DFG manufactured. Clamping and mounting parts can be dismantled and replaced by adapter parts. Thus the head can also be used on boring mills. Suitable for turbine construction. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale.
            inner taper of milling spindel ISO 50
            collet diameter .......
            turning speed range 1:2 - 800 U/min
            drive motor 37 kW
            weight of the machine ca. 1,3 t
            Description :
            2-axis NC fork head with pick-up station for automatic pick-up and deposit.

            Brand: Schiess-Froriep / Year of construction: 1993

            Technical data:
            - Translation ratio: 1:2
            - Outreach: 500/800 mm
            - Torque max.: 2.800 Nm
            - Drive: 37 kW
            - Tool holder: ISO 50
            - Swivel range A-axis: 180°
            - Swivel range B-axis: 360°
            - Feed rate max.: 360°/min
            - Rapid traverse of both axes max.: 360°/min
            - Speed max. 1:2: 800 rpm
            - Feed drives: Siemens
            - Head clamping: Hirth serration

            The head was designed for mounting on Schiess-Froriep large portal milling
            machines of the assemblies 40-50 FZT, 40-50 FZG as well as vertical lathes of
            the assemblies 50-63, 80/100 DV, DZ, DFG manufactured.
            Clamping and mounting parts can be dismantled and replaced by adapter parts.
            Thus the head can also be used on boring mills.

            Suitable for turbine construction.

            There is no guarantee for correctness and completeness of the technical details
            and accessories. - Subject to prior sale.
          Datasheet
          Request / Contact

          Rotary Table - Boring

          used  Rotary Table - Boring SCHIESS-FRORIEP


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0420 · Rotary Table - Boring

          SCHIESS-FRORIEP - - - 1974 / 2013 -

          Technical details
          table length 2.500 mm︱table width 2.500 mm︱table load max. 25 t︱Control ︱total power requirement kW︱weight of the machine ca. ca./approx. 15 t︱dimensions of the machine ca. m︱
          Rotary and sliding table / Brand: SCHIESS-FRORIEP Year of construction: 1974, Modernization: 2013 Scope of modernization in 2013: Renewal of: - Drives, - bearings, - drive units, - Measuring systems, - rotary encoder, - guideway covers. Current use in 2-shift operation. The table can be inspected by appointment in the factory. TECHNICAL DATA: - Control: compatible to Heidenhain iTNC 530 - Table clamping surface: 2.500 x 2.500 mm - Table displacement: 1.000 mm - Table load max.: 25 tons - Table rotation: 360° - Table positioning: stepless - T-Slots: 37 / 60 mm - T-Slots distance: 225 mm - Installation dimensions approx.: 4.600 x 2.800 x 1.000 mm - Table weight approx.: 15 tons Comment: This table is to be used as a positioning table. It is not possible to rotate or shift the table during tool engagement. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale.
            table length 2.500 mm
            table width 2.500 mm
            table load max. 25 t
            weight of the machine ca. ca./approx. 15 t
            Description :
            Rotary and sliding table / Brand: SCHIESS-FRORIEP
            Year of construction: 1974, Modernization: 2013

            Scope of modernization in 2013:
            Renewal of: - Drives, - bearings, - drive units, - Measuring systems,
            - rotary encoder, - guideway covers.

            Current use in 2-shift operation.

            The table can be inspected by appointment in the factory.

            TECHNICAL DATA:
            - Control: compatible to Heidenhain iTNC 530

            - Table clamping surface: 2.500 x 2.500 mm
            - Table displacement: 1.000 mm
            - Table load max.: 25 tons
            - Table rotation: 360°
            - Table positioning: stepless
            - T-Slots: 37 / 60 mm
            - T-Slots distance: 225 mm
            - Installation dimensions approx.: 4.600 x 2.800 x 1.000 mm
            - Table weight approx.: 15 tons

            Comment:
            This table is to be used as a positioning table.
            It is not possible to rotate or shift the table during tool engagement.


            There is no guarantee for correctness and completeness of the technical details
            and accessoires. - Subject to prior sale.
          Datasheet
          Request / Contact

          Hoist Traverse

          used  Hoist Traverse RICHTER 300 t


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0246 · Hoist Traverse

          RICHTER - 300 t - - 2009 -

          Technical details
          weight max. 300 t︱clamping width 15.500 mm︱weight 23 t︱
          1 piece crane / lifting beam/-traverse - Richter - Year of construction: 2009 Very good used condition. The inspection can take place at the factory by appointment. Description: - Load capacity: 300 tons - Range / distance of the attachment points: 15.500 mm - Net weight: 23 tons - Load double hook no.63 Construction drawings available
            weight max. 300 t
            clamping width 15.500 mm
            weight 23 t
            Description :
            1 piece crane / lifting beam/-traverse - Richter - Year of construction: 2009

            Very good used condition.

            The inspection can take place at the factory by appointment.

            Description:
            - Load capacity: 300 tons
            - Range / distance of the attachment points: 15.500 mm
            - Net weight: 23 tons

            - Load double hook no.63

            Construction drawings available
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Trader Profile:   Isabelle Knops
          Vermittlung & Handel Von Wzm

          Contact Trader



            Isabelle Knops
          Vermittlung & Handel Von Wzm

           Opladener Str. 126
            40789 - Monheim am Rhein
            Deutschland
            +49 (0)2173-4999611">+49 (0)2173-4999611
            +49 (0)2173-8546560
            isabelle.knops@isabelleknops.com
            www.isabelleknops.com

          Profile of Trader

          Welcome to Isabelle Knops -
          Mediation & trade of machine tools.

          Active in the mediation and trade of machine tools since 2008.

          SELF-EMPLOYED SINCE AUGUST 2015.

          RELIABLE          IMAGINATIVE          CUSTOMER-ORIENTED

          Contact

          Isabelle Knops
          Vermittlung & Handel von Werkzeugmaschinen
          Opladener Str. 126
          40789 Monheim am Rhein
          Germany

          E-Mail: isabelle.knops@isabelleknops.com

          Telephone number: +49 (0)2173-4999611 
          Mobile phone number: +49 (0)173-282 0007 
          Fax: +49 (0)2173-8546560




          Isabelle Knops Vermittlung  &  Handel Von Wzm  40789 - Monheim am Rhein Opladener Str. 126 Deutschland
          Isabelle Knops Vermittlung & Handel Von Wzm

          Opladener Str. 126



          Contact Trader


            Isabelle Knops Vermittlung & Handel Von Wzm
           Opladener Str. 126
            40789 - Monheim am Rhein
            Deutschland
            +49 (0)2173-4999611
            +49 (0)2173-8546560
            isabelle.knops@isabelleknops.com
            www.isabelleknops.com
            Contact person:

           




          Machine category


          3-Walzen - Blechbiegemaschine · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohrwerkstisch · CNC Drehmaschine · Fräskopf senkrecht · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Krantraverse · Plattenbohrwerk - Traghülse · Plattenfeld · Portal - Bearbeitungszentrum · Portalfräsmaschine · Portalfräswerk · Rundschleifmaschine - Universal · Schwerdrehmaschine · Topfschleifmaschine · Werkzeugschleifmaschine - Universal ·