SCHMITT REINHOLD GMBH Maschinen und Anlagen für BÄNDER - Stockist for used machines
Machinelist:
Roll Grinder

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-0910 · Roll Grinder
SCHMALTZ - WR 4/3000 - - 1954/1995 -
Technical details
in accordance to the technical specification 09.10
Analysis Unit

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-1276 · Analysis Unit
OBLF - ES 750-CA - - 1990 -
Technical details
SPECTROMETER with 9 ports for analysis analysis individual values matrix/prog: FE / FE 1 concentration in weight percent coil-no.: example 8888 elements: I-FE / C / SI / MN / P / S / AL / TI / NB

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-04102a · Analysis Unit
VOLLMER - VBK 563/12E - - -
Technical details
STRIP THICKNESS- and WIDTH GAUGE type: supposedly VBK 563/12 E partially revamped: (precision dial gauge 20 MUBE/0 include slide bush, caliper and gauge slide revamped by VOLLMER) include 2 pc. of amplifier, manufacturer VOLLMER, type VMF, for thickness-and width measuring process
Annealing Plant

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-14021 · Annealing Plant
EBNER - - - 2011 -
Technical details
execution: ANNEALING PLANT HICON/H2 heating temperature 850 degree C temperature inside inner cover 280 - 750 degree C otherwise according to technical specification 14.02-1
Blades

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-0547a · Blades
- - - -
Technical details

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-05494 · Blades
- - - -
Technical details
21 pc. OD 249,00 mm 19 pc. OD 251,80 mm 44 pc. OD 253,00 mm 56 pc. OD 254,30 mm 35 pc. OD 258,30 mm 16 pc. OD 258,40 mm 20 pc. OD 262,70 mm 40 pc. OD 266,10 mm 36 pc. OD 271,30 mm 39 pc. OD 275,80 mm 36 pc. OD 278,60 mm 4 pc. OD 282,80 mm 39 pc. OD 286,20 mm 40 pc. OD 286,30 mm

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-05491 · Blades
KLINGENBERG/NN - - - -
Technical details

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-05492 · Blades
NN - - - -
Technical details

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-0549c · Blades
- - - -
Technical details
Braking Unit

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-05002 · Braking Unit
FIMI - - - 1992 -
Technical details
construction pressure tubing system pneumatic adjustment by 4 internal air tubes lifting/dropping – upper beam hydraulically hydraulic unit not available
Coil - Tilting Unit (Downender)
-H_&_E.2008-150010-25032021115711808.jpg)

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-150010 · Coil - Tilting Unit (Downender)
H & E - E-CWV 60 - - 2009 -
Technical details
COIL – TILTING – UNIT (prism / platform – construction) dimension – prism – support (l x w) 1.000 X 840 (1.000) mm dimension – platform – support (l x w)) 1.340 x 1.000 mm tilt angle 90° coil – Ø max. 1.350 mm coil – height max. 1.670 mm required space (l x w x h) 2.950 x 2.000 x 1.920mm weight 5,30 to. accessories: coil – tilting – unit mounted on frame construction tilting process motor driven (power 7,50 kW) prism motor driven movable (roadway app. 500 mm) prism height adjustable by scissors device (spindle) control box mounted on frame construction control unit with cable
-HYWEMA.2008-15007-03122020160312434.jpg)

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-15007 · Coil - Tilting Unit (Downender)
HYWEMA - SV3-90 - - 1988 -
Technical details
COIL – TILTING – UNIT (prism / platform – construction) dimension - prism-support (l x w) 700 x 820 mm dimension - platform-support (l xw) 1.400 x 1.300 mm platform - splitted dimension - platform-distance for c-hook (l x w) 800 x 210 mm accessories: coil-tilting-unit mounted on frame construction tilting process hydraulically (2 x hydraulic cylinder) hydraulic-unit integrated in frame construction (power 5,5 kW) control cabinet mounted on frame construction control unit (bulk)
-KOEBO.2008-15008-03122020161000980.jpg)
- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-15008 · Coil - Tilting Unit (Downender)
KOEBO - - - 1980 -
Technical details
COIL – TILTING – UNIT (prism / platform – construction) dimension - prism-support (l x w) 670 x 1.100 mm dimension - platform-support (l xw) 1.500 x 1.000 mm platform - splitted dimension - platform-distance for c-hook (l x w) 1.300 x 235 mm accessories: coil-tilting-unit mounted on frame construction tilting process motor driven (by chain) - power kW brake system: double clasp brake - manually control cabinet(bulk)
Coil lifting carriage

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-07651 · Coil lifting carriage
UNGERER - GHF 1/250-09,5 - - 1989 -
Technical details
CONSTRUCTION - over floor (SCISSORS LIFT) movable hydraulically coil support - DOUBLE-roll roll length 1.650 mm roll – Ø 200 mm rolls driven - motor driven by chain press arm hydraulically with mounted strip feeding unit (adjustment hydraulically by spindle) hydraulic unit positioned on frame construction (power 5,5 kW)

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-07593 · Coil lifting carriage
FIMI - - - 1977 -
Technical details
construction under floor supporting surface 600 x 580 mm lifting height 1.100 mm distance bottom edge wheel - bottom edge cylinder 1.100 mm complete dimension (coil car retracted) 2.200 mm coil car movable (hydraulically by Servomotor) hydraulic unit not available

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-07592 · Coil lifting carriage
FIMI - - - 1977 -
Technical details
construction under floor supporting surface 850 x 580 mm lifting height 1.000 mm distance bottom edge wheel - bottom edge cylinder 970 mm complete dimension (coil car retracted) 1.970 mm coil car movable (hydraulically by Servomotor) coil protection frame (2 pc.) manually by gear rack hydraulic unit not available

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-0759 · Coil lifting carriage
PSM - - - -
Technical details
construction under floor supporting surface 530 x 360 mm distance bottom edge base plate - bottom edge cylinder 210 mm complete dimension (coil car retracted) 665 mm hydraulic unit not available

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-07594 · Coil lifting carriage
UNGERER - - - -
Technical details
construction under floor accessories: coil car hydraulically movable (by servo motor and chain) construction under floor coil-seating roll construction (2 parallel-rolls) roll composition rubberized roll width – each 450 mm roll – Ø – each 200 mm rolls – driven (each – hydraulically by servo motor) size – roll-support (outside-outside) 870 mm axle base – carrying wheel (middle-middle) 500 mm wheel base (outer edge wheel-wheel) 1.210 mm size – top edge roll-support - under edge wheel 750 mm size – under edge frame - under edge guide bar 650 mm size – coil car (complete retracted) 1.430 mm valve stand mounted on frame hydraulic unit not available

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-07582 · Coil lifting carriage
NN - - - -
Technical details
COIL CAR (L-design) - over floor design (construction) prism / counter-plate dimension – prism (support area – L x B) 530 x 775 mm dimension – counter-plate (h x w) 950 x 800 mm prism – lifting / lowering hydraulically lifting height 400 mm dimension – under edge wheel - prism support area 145 mm axle-base 1.000 mm wheel-base (outer edge wheel / wheel) 1100 mm accessories: coil car – movable motor driven (via chain) power 1,5 / 2,2 kW prism equipped with holes for coil-protection segments (rod) no. – coil-protection segments (rod) 2 pc. hydraulic – unit mounted on frame construction control box mounted on frame construction control unit mounted on frame construction

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-0761 · Coil lifting carriage
NN - - - -
Technical details
COIL – CAR (L-type) completely revamped technical details: construction coil-hutch with prism dimension – coil-hutch (support surface – l) 2.000 mm coil – Ø max. 1.900 mm coil-hutch – lifting / lowering hydraulically (2x hydraulic cylinder) lifting height (coil-hutch) 750 mm dimension – bottom edge wheel - prism-support surface 380 mm dimension – bottom edge wheel - middle coil eye 1.380 mm wheelbase (middle - middle wheel) 2.520 mm accessories: coil car motor driven movable by chain (hydraulic motor) pressarm with piano device hydraulically hydraulic – unit not available
Coil Opener/Pinch Roll Unit

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-01996 · Coil Opener/Pinch Roll Unit
HEGO - - - 1990/1991 -
Technical details
coil opener table adjustment hydraulically press unit hydraulically: roll surface rubberized roll length 1.680 mm roll – Ø app. 100 mm run out roll: roll surface rubberized roll length 1.650 mm roll – Ø app. 200 mm hydraulic unit not available

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-01997 · Coil Opener/Pinch Roll Unit
NN - - - -
Technical details
COIL OPENER- / DRIVER - UNIT the facility consists of: telescopic table - lifting/lowering + forward/back - hydraulically no. – driver rolls 2 (1 x above / 1 x below) roll length 1.580 mm / roll – Ø 300 mm / coating rubberized upper roll motor driven by toothed belt, driver unit gear motor, motor manufacturer Getriebebau Nord, type SK 160-11-4, power 17,3 kW/1.460 min-1 gear box manufacturer Getriebebau Nord, type SK 73-160-11-4, i = 52-24 adjustment upper block complete - lifting/lowering - hydraulically no. – conveyor roll (pulley) 3 (1 x above / 2 x below) roll length 1.500 mm / roll – Ø 150 mm / coating rubberized adjustment – upper roll - hydraulically adjustment – lower rolls - central – hydraulically adjustment – lower rolls - single – manually (2 x hand wheel) holding down roll (run out side) roll length 1.350 mm / roll – Ø 100 mm / coating rubberized adjustment – manually (cover plate) valve stand mounted on frame construction hydraulic unit not available
Crop shear

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-05983 · Crop shear
NN - - - 1995 -
Technical details
construction CUTTING SHEAR (HYDRAULIC SHEAR - double cut block type) machine mounted on base frame construction construction (double-cut-block-type) 2-column construction system cut-block I and cut-block II stacked mounted table with 2-HI rolls infeed driver unit daylight width 400 mm roll construction rubberized roll width 400 mm adjustment – upper roll manual (hand wheel) motor power 0,37 kW table – lifting / lowering pneumatical (cylinder) cut-block I (upper cut-block) adjustment (cutting procedure) upper knife cut-block II (lower cut-block) adjustment (cutting procedure) lower knife cutting procedure (cut-block I und II) hydraulically control unit mounted on stand control cabinet mounted on base frame construction hydraulic unit not available

- SCHMITT REINHOLD GMBH
- Obernahmerstr. 74
- 58119 Hagen-Hohenlimburg
- Deutschland
-
+49 (0)2334 4847
+49 (0)2334 4840 -
info@reinhold-schmitt.de
www.reinhold-schmitt.de

#2008-059851 · Crop shear
NN - - - -
Technical details
construction CUTTING SHEAR (CROP SHEAR - HYDRAULICALLY) daylight width: 1.560 mm material thickness (stainless steel): 1,50 mm at 650 Nmm² knife length: 1.500 mm - knives bifid (length each 775 mm) cutting angle adjustment mechanically accessories: machine mounted on base frame infeed side - monted conveyor roll / infeed table adjustment (cutting process) from the bottom (lower knife block) upper knife block fixed in machine frame hydraulic unit integrated in frame construction no. - set of knives (1 set = 4 pieces): 3 1 set (4 pieces) mounted in the machine 1 set (4 pieces) as spare part (knives in used condition) 1 set (4 pieces) as spare part (knives new / original packed)
Trader Profile: Schmitt Reinhold GmbH
Maschinen Und Anlagen Für Bänder,
Bleche, Rohre Und Profile

Contact Trader
Maschinen Und Anlagen Für Bänder,
Bleche, Rohre Und Profile
Obernahmerstr. 74
58119 Hagen-Hohenlimburg
Deutschland
+49 (0)2334 4847">+49 (0)2334 4847
+49 (0)2334 4840
info@reinhold-schmitt.de
www.reinhold-schmitt.de
Profile of Trader
We are a trading company which was established in 1969 and we have a storage space of about 3.200 m² and our business is to sell used and new machinery for metal processing.
e deal with the purchasing and selling of used and new machinery, as well as manufacturing facilities for the production and handling of COILS, SHEET METAL, TUBES and PROFILES from steel, stainless steel, copper, brass and aluminium, for example HOT ROLLING MILLS, COLD ROLLING MILLS, SLITTING LINES, CUT TO LENGTH LINES, DECOILER, RECOILER, TUBE WELDING LINES, PROFILING LINES, LEVELER, STRAIGHTENER, ANNEALING- and HARDNESS PLANTS as well as components of the mentioned machinery.
If required we handle the dismantling, loading, logistic, import, export process and reassembly of the facilities as well as modernizing or changing the control mode. We assure at any time a professional and qualified collaboration to meet your expectations.
We have nearly 50 years experience in the business of trading used and new machineries as well as manufacturing facilities for the production and handling of COILS, SHEET METAL, TUBES and PROFILES.
Contact us
REINHOLD SCHMITT GMBH
Contact persons:
Roland Becker
Holger Suberg
Giovanna Isopp
Obernahmerstrasse 74, D – 58119 Hagen (Germany)
02334 4847
02334 4840
info@reinhold-schmitt.de

Obernahmerstr. 74
Contact Trader
Obernahmerstr. 74
58119 Hagen-Hohenlimburg
Deutschland
+49 (0)2334 4847
+49 (0)2334 4840
info@reinhold-schmitt.de
www.reinhold-schmitt.de
Contact person: