saw blade diameter 900/1000/1120 mm︱cutting diameter 50 - 400 mm︱weight of the machine ca. 7 t︱Overall size 1260 x 2060 x 2705 mm︱total power requirement kW︱dimensions of the machine ca. m︱

---

COLD CIRCULAR SAW Make Ohler Type: KA 1000 Year of construction: 1975 modernized 2014 Working range: material dimension 50 - 425 mm Ø With New adjustable length stop for short lengths      Control cabinet with SIEMENS Simatic ET 200M year 2014      Hydraulic station year 2014 Drive motor: 500V, 15kW, 1450rpm, 50Hz with numerous spare parts Weight: approx. 7 to

cutting diameter 8 - 80 mm︱saw blade diameter 250 - 370 mm︱cutting speed 10 - 300 m/min︱total power requirement ca. 75 kW︱weight of the machine ca. ca. 33 t︱dimensions of the machine ca. m︱

---

Sawing plant Fabr. Rattunde Type. ACS 90/2 Construction year. 2006 made for sawing one or two tubes (bars)simultaneously Working range: tube Ø 8 - 80 mm Rod Ø 8 - 50 mm capacity: max. 2.500 pieces/hour with single cutting Raw material: up to 12 meters Cut lengths: 1 mm - 2000 mm complete system consisting of: - Feed trough with separation and light barrier - Infeed roller table - sawing plant - chip conveyor - Double-sided brushing system - extraction system - car wash - Robots for the removal and packaging of the Finished material Connection data: Power kW 130 Mains voltage AC 3x400V Total weight of the system: 33 000 kg

round bar steel 63 mm︱square edge steel 55 mm︱ Flach 100 x 25 mm︱pressing power t︱no. of strokes Hub/min︱ ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

SHEAR constr. Peddinghaus type Simplex 63 cutting range Ø 63 mm max. square 55 mm max. flats 100 x 25 mm Weight: appr. 2450 kg

working area 35 - 140 / 170 mm︱Bar length 8000 mm︱speed 20,30,40 m/min︱straightening speed mm/min︱no. of straightening rolls ︱wall strength mm︱diameter mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

10 - Roll Straightening machine for bars and tubes Construction WIRTH Type SRM - 160 / 3 New approx. 70ties Condition: good Working range: bars 35 - 140 mm dia. up to 1000 N/mm² tubes 35 - 170 mm dia. Roll design: 3 lower straightening rolls, driven 7 upper counter pressure rolls, non-driven Material length: up to 8 meter Straightening speed: 20, 30 and 40 m/min. Main motor 3 x 32/42/50 kW, 750/1000/1500 Rpm, 500 V, 50 Hz The complete line consists of: - Material entry table (chain conveyor) - Separating device - Entry roller channel - Main machine boday with 3 gears and 3 motors - Exit channel - Material deposite collecting rack - Operating panel - Electrical cabinet Total weight: approx. 58 to. Photos: more photos are availableuponrequest. Reference video: Can be seen on Video DISMANTLING TO BE BORNE BY THE BUYER

pulling force - max. 25 t︱diameter 12 - 80 mm︱drawing length 13000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Triple drawing chain bench for tubes and bars with Pre-banch Make: Haginger Type: 250/3 Year: 1981/2006 Traction: 25 tons. Suitable for. Single, double,triple draw Working range: Ø 12-80 mm tubes 12-50 mm bars Drawing speed: continuously 2 to 60 m / min Rewind speed. Max. 120 m / min pre-tube 12.5 meter Drawing length: max.15 meter Electric: Siemens S7 Main motor: 200 kW Operating voltage: 400 V, 50 Hz Control voltage: 24 V There are 4 saws integrated in this line. a matching tube pointer (for tag ends on thin-wall tubestubes) can be supplied The equipment is in excellent condition.

diameter 21 - 133 mm︱wall strength 2 - 9 mm︱no. of straightening rolls 6 ︱straightening speed max. 240 m/min.︱total power requirement kW︱weight of the machine ca. ca. 35 t︱dimensions of the machine ca. m︱

---

6 - roll straightening machine for bars and tubes Construction: KOCKS Type: RM 133 New-in: approx. 1980ties Condition: good Working range Ø: 21,30 – 133,00 mm Wall thickness: 2,00 – 8,80 mm Straightening speed: 24 - 240 m/min. Material lengths: 8 - 16 (17) Meter Rolls: 3 upper and 3 lower rolls, all driven Roll basic Ø: min.: 260 mm, max. 280 mm Adjusting angle: 36,0 – 43,5 degrees Working direction: from right to left Main drive: 2 direct current motors (air/water cooling), with converter 8,3 – 83/83 kW, 78 – 780/1960 Upm, 400 V, 50 Hz Scope of supply: - Separating device with entry channel - Drive-in duo - Main machine body with drive motors and 2 spur gears, 3 steps: 45,4 – 126,2; 88,2 – 244,9; 179,1 – 497,5 Rpm - Extraction duo - Exit channel with excavator - Hydraulik valve stand - Control elements (2 power parts for drive motors, parts for control cabinet) - Div. spares and accessories, like e.g.: 12 straightening rolls, drive rolls, spare control unit, div. bearings, hoses, valves, PVC jaws, shaft for straightening rolls, spindle, hydraulic cylinder, axial piston motor, heat exchanger, hydraulic motor, worm gear motor Total line length: about 42 meters otal weight: approx. 35 to. More photos: are available upon request

quality Überkopf 0︱wire diameter - min. 4 mm︱wire diameter - max. 10 mm︱

---

overhead payoff for wire drawing machines year: 1990 working range: Ø 4 - 10 mm overhead payoff with electrical chain DEMAG

working area 2,,,,,,,,,,,,9,,,,10 mm︱Working height 750 mm︱

---

DRIVE DUO for bars constr. Schumag size 0 working range: 2 - 9 (10) mm working height on support: 750 mm Motor: 0,55 kW, 300/2835 rpm, 220/380 V, 50 Hz

working area 8 - 50 mm︱Tube length 100 bis 1 000 mm︱total power requirement 11,55 kW︱weight of the machine ca. 1,1 t︱

---

DOUBLE SIDED BRUSH DESCALING MACHINE Constr. WYKO year 1988 working range: 8 - 50 mm dia. production capacity: 4.000 pieces/hour drive motors of brushes: 2 x 5,5 kW, 220/380 V, 50 Hz, 1435 rpm drive of cross transport : 0,55 kW, 220/380 V, 50 Hz, 15 - 75 rpm measures: 2,70 m length x 2,50 m width x 1,70 m height

working area 1 - 6 mm︱rated capacity 10 kVA︱quality II ︱

---

Butt Welding Machine with reannealing unit, grinding stone and shears on moveable underframe Manufacturer Schlatter Type EA-2 Power 10kVA Working range max.Ø 6 mm min.Ø 1 mm Injection 380 V, 50 Hz

pulling capacity 45 t︱working area 18 - 59 mm︱speed max. 90 m/min︱

---

COMBINED DRAWING MACHINE Constr.: Schumag Type: KZ - IV -B year: 1995 drawing force: 45 T working range: round: 18 - 59 mm Ø square: 38 mm max. hexagonal: 45 mm max. speed: max. 90 m/min - Double pay-off, carousel type - Coil opener, RIBI - Disa shot-blaster - Pre-straightener: horizontal and vertical - hydraulic push-pointer, (New in year 2019) - Draw-bench, with gearbox and motor - Horizontal straightener - Vertical straightener - Hydraulic impact flying shear - Pinch-roll - Sound abated canal - Pinch-roll - Two-roll straightening machine, horizontal - V delivery table - Collecting pockets - Exit table/s - Hydraulic equipment - Electric equipment - Manuals and drawings Photos on request

pulling capacity 1,5 t︱working area 2 - 9 mm︱

---

Combined Drawing Machine with a double-sided Chamfering Machine Construction: Schumag Type: 0B Year: 1970 / 1971 Working range: Steel 2 - 7,5 mm Ø NE 2 - 9 mm Ø Drawing force: 1,5 tons Speed: (15/40/60 m/min.) The line consists of: - pre-straightener, horizontal and vertical - Drawing Machine (motor: 380V 50Hz 22kW) - horizontal and vertical straightening device - flying shear - Straightening and Polishing Machine (motor: 380V 50Hz 11kW) - cleaning unit for construction Turbo Separator (for Ripo) - Double-sided Chamfering Machine - Construction: Ris Ingold (twice chamfering, once sawing) - electrical cabinet We dispose also of a separate rotary decoiler which can be purchased additionally. Video. https://www.youtube.com/watch?v=6fL0C3crOrU&t=41s

working area 8 - 65 mm︱speed 100 m/min︱Number of turbines 4 oder 6 ︱

---

New Descaler for for bars or wire coils 4 or 6 turbines

from 1,6 mm︱up to 0,25 - 0,6 mm︱speed max. 360 m/min︱

---

Fine wire drawing machine Make. Lukas   Type. Construction year. 2002 Workspace. infeed max. Ø 1.2 mm            finished wire.Ø 0.25 - 0.6 mm The plant consists of: - decoiler for wire coils - Continuous wire annealing - wire drawing machine - Vertical wire spooler Complete with control cabinets Power supply 400V, 50Hz there are several machines available

from 0,6 mm︱up to 2,5 mm︱speeds: 0 - 10 m/sec.︱

---

FINE WIRE - WET DRAWING MACHINE Construction: KOCH Year: 1987 Typ: KTZ III/13 and KHS 800 Number of draws: 13: 1 - 12 = wet drawing 13. = dry drawing, drum-Ø 450 mm Cross section reduction: 15 - 16% Drawing speed: 0 - 10m / s Working area: Steel, iron and metal wire Inlet Ø: max. 2,2 (2,5) mm Finish Ø: 0,6 - 1,6 mm at 2000 - 1600 N/mm² Ø of drawing discs: 120 mm Main motor: 37 kW, 500, 50 Hz Power supply: 500 V or 380 V via existing transformator Horizontal Spooler: max.1000 kg capacity, spool motor: 11 kW spool sizes: width max. 600 mm Flange Ø core Ø 560 273 560 224 355 200 740 400 820 400 The Line consists of: =============== - overhead pay-off system - drawing machine with 13 drawing dies, Typ KTZ III/13 - horizontal spooler (bobbin winder), Typ KHS 800 - switch cabinet with SIEMENS S 5 control - transformator - hydraulic station Weight: approx. 7,5 to.

diameter 80 - 25 mm︱workpiece length max. 350 mm︱quality hydraulische Spannv. 0︱working area 100 - 25 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱lip angle °︱material length max. ca 350 mm︱

---

POINTING - MILLING MACHINE FOR BARS Fabr.: Krollmann Type: FM H4 year: 2000 Pointing Milling machine with 4 pieces hard-metal turn-over plates working range: round + profile + square: 80 (100) to 25 mm Ø Milling drive: 380 / 420 V. 18,5 kW, 50 Hz, 1465 rpm Machine consists of: - pointing milling machine with oil mist exhauster with hydraulical clamping and pusher device - hydraulic control unit - cooling medium tank with chip box - command desk - electrical cabinet with air condition, SIEMENS S 7-300 control

working area 0,5 bis 2 mm︱working feed max. 6 m/sec︱weight max. 0,4 t︱

---

Wire Coiler (Static Coiler) Constr. Bongard Type: FW-50/II Year: 1980 Winding disc Ø 400 mm The coiler is suitable for small casks. Outer: Ø max. 500 mm casks height: max. 750 mm or small coiling devices Drive motor: 500 Volt, 4kW, 1435 rpm

working area 1,5 - 3,5 mm︱working feed max. 16 m/sec︱weight max. 1 t︱

---

Vertical Static Coiler Make Bongard Type: NS 600 Year of construction: 1980 Working range: For steel wire Ø 1.5 - 3.5 mm Winding speed: Infinitely variable up to 16 m / sec Main motor: 380V, 50Hz, 11kW Complete with control cabinet

wire dia. max. 7,5 mm︱Power 8 x 55 KW︱weight of the machine ca. 28 t︱total power requirement kW︱dimensions of the machine ca. m︱

---

RECTILINEAR WIRE DRAWING MACHINE with 8 drawing blocks Manufacturer: KOCH Type: KGT 1250/3 Year of construction: 1994/1996 Drawing range: inlet-Ø 2.7 - 7.5 mm - finished-Ø 1.0 - 5.0 mm Drawing speed max.: 15 m/sec. Number of drawing blocks: 8 (water cooling) drawing drum-Ø 600 mm Control: Siemens S Power: 8 x 55 KW Voltage: 400 V 50 Hz with Siemens frequency converter, renewed in 2007 The plant consists of: - overhead pay off - 8 drawing blocks including the electrical control cabinets and the last drawing drum - Wire cleaning system - Traversing spooler, Typ KHS 1000,Year:1996, 30 KW, dimensions spooler: flange-Ø 850/900/1000 mm; total spooling width: 600/660 mm - 4 pieces DN760 coils Total weight: about 28to. VIDEO AND MORE PHOTOS ON REQUEST

inlet-Ø 2,7 - 8,0 mm︱Drawing drum Ø 600 mm︱finished wire dia. 1.0 - 5.0 mm︱

---

RECTILINEAR WIRE DRAWING MACHINE with 11 drawing drums Constr.: Breitenbach Type: NN Year of construction: 1980/2003 Drawing range: inlet Ø 2.7 - 8 mm - finished Ø 1.0 - 5.0 mm Number of drawing blocks: 11 (water cooling) drawing drum diameter: 600 mm Control: Siemens S7 (overhauled 2003) Voltage: 400 V, 50 Hz The plant consists of: - overhead pay-off - Brush cleaning, year 1999 - 11 drawing blocks including the electrical control cabinets and the finishing wheel - Cleaning system - Traversing spooler - 4 pieces DN760 coils Motors : 8 x AC Motors and 3 x DC motors each à 50 KW with new Siemens frequency converter and DC Converter Total weight: about 40 to. Videolink: https://www.youtube.com/watch?v=-dNRLkswfZw

pulling capacity 2,5 t︱Drawing drum Ø 600 mm︱speed m/min︱

---

VERTICAL SINGLE DRAWING BLOCK constr. Sket type UDZSAZ 2500/600-2 year 1978 wire inlet-Ø 8 mm Ø max. finished wire-Ø 2 mm Ø min. drawing force max. 2,5 To. drawing drum-Ø 600 mm drawing die 43 x 27 (3°) drawing speed 2 m/sec. motor capacity 22 kW, 1450 U/min., 380 / 660 V, 50 cycles cooling of drawing drum water, direct of drawing die water, indirect with pneumatical break Weight: approx. 2.900 kg

wire dia. 8,8 - 4,0 mm︱pulling capacity 2,5 t︱drive motor 22 kW︱weight of the machine ca. 3 t︱

---

Vertical single drawing block constr.: Breitenbach Type: UB 2.5 year: 1976 drawing drum-Ø 600 mm drawing force: 2,5 t working range: ca. 8.8 - 4.0 mm 6 drawing speeds: 0.8 / 1.2 / 1.5 / 1.6 / 2.7 / 3 m/sec. with lifting cage Motor: 380/220 V 22 kW 1435 rpm weight: approx 3 t

wire dia. bis 4 mm︱drawing speed 3 - 15m/sec mm/sec︱pulling capacity 2 x 2 to. t︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

VERTICAL DRAWING MACHINE WITH COIL WINDER Constr.: Breitenbach Working range: 1.6 - 4 mm Ø Drawing speed: steplessly, frequency controlled 3 - 15m/sec The machine consists of: ========================= - 2 x vertical Bullblock, Typ UB 1 drawing drum- Ø 600 mm drive motor, each 30 kW - hanging coil winder, type UW 600 (700) winding disks Ø 600 and 700 mm drive motor 5,5 kW - electrical cabinet: 380 V, 50 Hz

wire dia. bis 26 mm︱pulling capacity 10 t︱total power requirement 96 kW︱weight of the machine ca. 12 t︱

---

Vertical Wire Drawing Machine with laying spooler Drawing Machine Construction: Herborn Type: HG 10 Year: 1971 (renovated in 2006) Working range: max. 16 mm Ø working with steel max. 26 mm Ø working with copper (produced last round and square) drawing force: 10 tons drum diabmeter: 700 mm drawing speed: max. 100 m/min frequency controlled Main motor: 380-420V, 50Hz, 75kW laying spooler Construction: Erkelenz Type: Year: 2006 Coil weight max. 2 tons drive motor: 380V 7,5 kW complete electrics 2006 with Siemens S7 control More pictures on request