Heinz Sanders GmbH Maschinen - Werkzeuge - Schweisstechnik - Stockist for used machines

turning diameter 420 mm︱turning length 1000 mm︱control monforts control ︱turning diameter over slide 280 mm︱travel -z axis 620 mm︱travel -x axis 250 mm︱spindle diameter in front bearing 130 mm︱rapid traverse Z = 15 m/min︱rapid traverse X = 12 m/min︱spindle motor 3,7 x 2,4 x 2,2 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 6,8 m︱

---

turning diameter 430 mm︱turning length 1000 mm︱control CNC ︱turning diameter over bed slide 277 mm︱spindle passage 30 mm︱number of spindle speeds 30 - 2800 U/min︱x-axis 240 mm︱z-axis 700 mm︱weight of the machine ca. 3,0 t︱dimensions of the machine ca. 2,5 x 1,9 x 1,9 m︱

---

turning diameter 660 mm︱turning length 1500 mm︱control FAGOR ︱centre height 330 mm︱spindle passage 82 mm︱number of spindle speeds 30-2000 U/min︱bed width 390 mm︱rapid speed X/Z 4 - 8 m/min︱tailstock quill diameter 75 mm︱Main spindle capacity 15 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,8 x 1,8 x 2,15 m︱control ︱

---

- FANUC Series 18i TB Control, Manual Guide i Function - Central control panel for machine and CNC control on the pedal arm 45 ° swiveling - 12-fold tool turret - Fanuc drive with 30 kW (50% ED) - Chip conveyor - Bezel - 3 jaw chucks

turning diameter 610 mm︱turning length 950 mm︱control FANUC Series 0I- TC ︱rapid power traverse in X-and Z direction 20 / 24 m/min︱turning diameter over bed 740 mm︱feed length X = 340 mm︱total power requirement 37 kW︱weight of the machine ca. 12,0 t︱dimensions of the machine ca. 4,5 x 2,4 x 2,4 m︱

---

EQUIPMENT: • Fanuc 0i-TC control including manual guide 10.4 inch color display • Fanuc main spindle and axis motors • High-precision 12-position bloc-holder turret with direct holder • Toolholder package • Hydraulic hollow clamping device with 3-jaw power chuck • Cooling lubricant system • Automatic chuck activity OPEN-CLOSE • Hydraulic unit • Electronic axis supervision

turning diameter 400 mm︱turning length 600 mm︱control Siemens 820 T ︱turning diameter over bed slide 375 mm︱face slide travel max 375 mm︱spindle passage 103 mm︱transmission ratio 2 ︱turning speed range 32 - 3150 U/min︱feed stepless ︱feeds X-axis 0,001 - 180 mm/U︱feeds Z-axis 0,001 - 300 mm/U︱rapid motion - x-axis 6000 mm/min︱rapid traverse Z-axis 10000 m/min︱turning tool - shaft cross cut max. 25 x 25 ︱tailstock quill adjustment 100 mm︱tailstock quill taper MT 4 ︱total power requirement 52 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 9 x 3,8 x 1,96 m︱Control ︱

---

turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱

---

turning diameter over bed 440 mm︱turning diameter over slide rest 220 mm︱turning length 1500 mm︱bed width 400 mm︱spindle passage 52 mm︱turning speed range 20 - 2000 U/min︱feeds - longitudinal 0,04 - 12 mm/min︱feeds - cross 0,02 - 6 mm/min︱total power requirement 7,5 kW︱weight of the machine ca. 2,9 t︱

---

turning diameter over bed 280 mm︱turning diameter over slide rest 155 mm︱turning length 800 mm︱spindle bore 24 mm︱turning speed range 50 - 1700 U/min︱tailstock quill taper MT 2 ︱total power requirement 1,4 / 1,9 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,8 x 1,2 x 1,2 m︱

---

turning diameter 360 mm︱turning length 1000 mm︱swing diameter over bed slide 220 mm︱turning dia. in gap 502 mm︱spindle bore 52 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5 ︱tail stock 3 MK ︱quill travel 100 mm︱total power requirement 1,5 /2,2 kW︱weight of the machine ca. 0,58 t︱dimensions of the machine ca. 1,83 x 0,76 x 1,6 m︱

---

turning diameter 350 mm︱turning length 1000 mm︱swing diameter over bed slide -- mm︱turning diameter in the gap 450 mm︱spindle bore 40 mm︱turning speeds 70 - 2000 U/min︱bed width 180 mm︱spindle taper 55029 D 1-4 ︱tail stock 3 MK ︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,53 t︱dimensions of the machine ca. 1,73 x 0,7 x 1,35 m︱

---

turning diameter 400 mm︱turning length 1000 mm︱swing diameter over bed slide 240 mm︱turning dia. in gap 560 mm︱spindle bore 52 mm︱turning speeds (12) 45 - 2000 U/min U/min︱bed width 210 mm︱spindle taper MK 4 ︱quill travel 100 mm︱total power requirement 2,0 / 2,4 kW︱weight of the machine ca. 0,82 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,6 m︱

---

turning diameter 330 mm︱turning length 830 mm︱swing diameter over bed slide 196 mm︱Swingdiameter in the bed bridge 170 ︱centre height 165 mm︱centre distance 830 mm︱Turning length in the bed bridge 430 ︱reus 16 (70-2000) U/min︱tail stock MK 3 ︱quill stroke 110 mm︱diameter of quill 32 mm︱spindle taper DIN ISO 702-2 Nr. 4 ︱spindle bore 38 mm︱spindle cone MK 5 ︱feed längs 32 / 0,052 1,392 m/min︱feed plan 3,2 / 0,014 0,38 m/min︱total power requirement kW︱weight of the machine ca. 0,52 t︱dimensions of the machine ca. 1,7 x 0,75 x 1,6 m︱

---

Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762

turning diameter 560 mm︱turning length 1000 mm︱swing diameter over bed slide 360 mm︱spindle bore 42 mm︱spindle taper 5 MK︱longitudinal feeds: 0,03 - 0,4 mm︱cross feeds: 0,01 - 0,13 mm︱spindle turning speed range 75 - 2000 U/min︱total power requirement 3,85 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 2135 x 915 x 1525 mm︱

---

turning diameter 560 mm︱turning length 1000 mm︱swing diameter over bed slide 360 mm︱spindle bore 42 mm︱spindle taper 5 MK︱longitudinal feeds: 0,03 - 0,4 mm︱cross feeds: 0,01 - 0,13 mm︱spindle turning speed range 75 - 2000 U/min︱total power requirement 3,85 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 2135 x 915 x 1525 mm︱

---

turning diameter 560 mm︱turning length 1000 mm︱swing diameter over bed slide 360 mm︱spindle bore 42 mm︱spindle taper 5 MK︱longitudinal feeds: 0,03 - 0,4 mm︱cross feeds: 0,01 - 0,13 mm︱spindle turning speed range 75 - 2000 U/min︱total power requirement 3,85 kW︱weight of the machine ca. 900 kg︱dimensions of the machine ca. 2135 x 915 x 1525 mm︱

---

- simple automatic material feed: 750 mm - Multiple material feed (up to 9x): 6750 mm

turning diameter 425 mm︱turning length ca. 1200 mm︱swing diameter over bed slide 205 mm︱speeds 24 ︱turning speed range 11,2 - 2240 U/min︱feed längs 0,063 - 56 m/min︱feed quer 0,0315 - 28 m/min︱tailstock quill taper MT 5 ︱total power requirement 11 kW︱weight of the machine ca. 3400 kg︱dimensions of the machine ca. 3,3 x 1,5 x 1,8 m︱

---

turning diameter over bed 1000 mm︱turning diameter over slide rest 660 mm︱turning length 4000 mm︱turning dia. in gap 1400 mm︱center height over bed 500 mm︱centre distance 3400 mm︱spindle passage 110 mm︱turning speed range 3 - 600 U/min︱feeds - longitudinal 0,042 - 1,691 mm/U︱feeds - cross 0,023 - 0,938 mm/U︱total power requirement 34 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 6,1 x 2,1 x 2,1 m︱

---

turning diameter over bed 820 mm︱turning diameter over slide rest 430 mm︱turning length 3500 mm︱spindle bore diameter ca. 130 mm︱spindle speeds: 24 ︱spindle turning speed range 7,1 - 1400 U/min︱feeds: 36 ︱feeds: bed slide/longitudinal 0,05 - 2,8 mm/U︱feeds - cross 0,025 - 1,4 mm/U︱tailstock quill diameter 100 mm︱tailstock quill taper MT 6 ︱tailstock quill stroke 280 mm︱bed width 560 mm︱total power requirement ca. 25 kW︱weight of the machine ca. t︱dimensions of the machine ca. 6,5 x 1,8 x 1,4 m︱

---

Equipment: - HEIDENHAIN Digital display, 2-axis - coolant system

spindle diameter 60 mm︱x-travel max. 1000 - min. 100 mm︱y-travel max. 1000 - min. 100 mm︱bore capacity in steel max. 40 mm︱thread capacity max. M24 ︱Thickness max. 60 - min. 5 mm︱spindle turning speed - stepless einstellbar 1 - 1.000 U/min︱feed stepless einstellbar, Eilgang 1 - mm/min︱feed stepless einstellbar, Arbeitsgang mm/min︱feed power 16 KN︱tool taper SK 40 ︱spindle stroke 600 mm︱positioning speed in allen Achsen 1 - 10.00 mm/min︱positioning accuracy auf 300 mm = +/- 0,01 mm︱table load max. 500 kg︱work height max. 1000 mm︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 3,5 x 3,3 x 3,1 m︱Control Bosch ︱

---

bore capacity in steel (diameter) 32 mm︱throat 290 mm︱bore stroke 150 mm︱spindle taper MT 3 ︱spindle turning speed - stepless 80 - 1170 U/min︱total power requirement 1,3 kW︱weight of the machine ca. 0,4 t︱dimensions of the machine ca. 0,9 x 0,6 x 2,1 m︱

---

bore capacity in steel (diameter) 13 mm︱throat 245 mm︱bore stroke 100 mm︱spindle taper MT 2 ︱total power requirement 0,52 / 0,74 kW/h kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 0,7 x 0,45 x 1,75 m︱

---

Bench drilling machine SOLID TB16 S on desk stand Infinitely variable speeds from 250 to 3950 rpm Drilling table 350 x 560 mm Column diameter 90 mm Machine height with desk stand 1750 mm included: - underframe - drill chucks - EMERGENCY STOP SWITCH - Chuck protection

bore capacity in steel (diameter) 25 mm︱throat - mm︱bore stroke 120 mm︱ MK 3 ︱ 10 ︱ manuell 245 – 4.100 U/min︱ manuell über Griffkreuz ︱ 300 x 270 mm︱ 100 mm︱ 250 mm︱ 0,71 / 1,35 kW︱ 0,23 t︱ 700 x 500 x 1400 mm︱

---

40 mm︱ 220 mm︱ 100 mm︱ 8 Stufen / Steps ︱ 105 - 1257 U/min︱ 95 mm︱ 1,8 kW︱ 0,3 t︱ 2,05 x 1,03 x 0,6 m︱

---

bore capacity in steel (diameter) 40 mm︱throat 293 mm︱bore stroke 120 mm︱spindle taper MT 3 ︱column diameter 115 mm︱table surface area 514 x 360 mm︱spindle turning speed - stepless 160 - 2250 U/min︱total power requirement 1,45 / 1,90 kW︱weight of the machine ca. 285 kg︱dimensions of the machine ca. H: 1840 mm︱

---