European network of stockholding machinery dealers
+49 (0) 2389 5299080
Inquiry

Category:
    Manufacturer:
      Machines:
        Trader:
             View: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          WMT GmbH & Co.KG - Stockist for used machines

          Machinelist:

          Bench Lathe

          used Bench Lathe KAMI DKM 250L

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78001 · Bench Lathe

          KAMI - DKM 250L - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.
          Datasheet
          Request / Contact
          used Bench Lathe KAMI DKM 250L-1

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78000 · Bench Lathe

          KAMI - DKM 250L-1 - - -neu- -

          Technical details
          turning diameter over bed 250 mm︱turning diameter over slide rest 130 mm︱turning length 700 mm︱turning speeds 115 - 1620 U/min︱centre height 125 mm︱spindle bore 27 mm︱tailstock quill taper MT 2 ︱tailstock quill stroke 40 mm︱metric threading 0,2 - 3,5 mm︱thread - inch 8 - 56 inch.︱thread - module 0,2 - 12,5 mm︱swival range +/- Oberschlitten 45 °︱connected load frequency 400 V︱total power requirement 0,75 kW︱weight of the machine ca. 0,15 t︱dimensions of the machine ca. 1,41 x 0,61 x 0,41 m︱
          Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways "by adjustable strips" - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled.
            turning diameter over bed 250 mm
            turning diameter over slide rest 130 mm
            turning length 700 mm
            turning speeds 115 - 1620 U/min
            centre height 125 mm
            spindle bore 27 mm
            tailstock quill taper MT 2
            tailstock quill stroke 40 mm
            metric threading 0,2 - 3,5 mm
            thread - inch 8 - 56 inch.
            thread - module 0,2 - 12,5 mm
            swival range +/- Oberschlitten 45 °
            connected load frequency 400 V
            total power requirement 0,75 kW
            weight of the machine ca. 0,15 t
            dimensions of the machine ca. 1,41 x 0,61 x 0,41 m
            Description :
            Equipped with
            - 2-axis digital measuring system with position indicator
            - manufactured according to DIN 8606
            - 27 mm spindle passage
            - adjustable guideways "by adjustable strips"
            - Strong engine with 0.75 kW
            - High resolution of the axis spindles for exact positioning

            Delivery:
            3-jaw chuck 100 mm, change gear set, splash guard 3-axis
            digital measuring system fully assembled.
          Datasheet
          Request / Contact

          Center Lathe

          used Center Lathe KAMI DKM 360-1

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78051 · Center Lathe

          KAMI - DKM 360-1 - - 2016 -

          Technical details
          turning diameter over bed 360 mm︱turning diameter over slide rest 220 mm︱turning length 1000 mm︱turning diameter in the gap 506 mm︱turning speeds 36 45 - 1800- 1600 U/min︱centre height 180 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 ︱total power requirement 2,4 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,2 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 360 mm
            turning diameter over slide rest 220 mm
            turning length 1000 mm
            turning diameter in the gap 506 mm
            turning speeds 36 45 - 1800- 1600 U/min
            centre height 180 mm
            spindle bore 38 mm
            tailstock quill taper MT 3
            total power requirement 2,4 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,2 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 330

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78054 · Center Lathe

          KAMI - DKM 330 - - -neu- -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 210 mm︱turning length 635 mm︱turning diameter in the gap 480 mm︱turning speeds 58 - 2500 U/min︱centre height 167 mm︱spindle bore 40 mm︱tailstock quill taper MT 3 MK︱total power requirement 2,2 kW︱weight of the machine ca. 0,8 t︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 330 mm
            turning diameter over slide rest 210 mm
            turning length 635 mm
            turning diameter in the gap 480 mm
            turning speeds 58 - 2500 U/min
            centre height 167 mm
            spindle bore 40 mm
            tailstock quill taper MT 3 MK
            total power requirement 2,2 kW
            weight of the machine ca. 0,8 t
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 660 S

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78060 · Center Lathe

          KAMI - DKM 660 S - - -neu- -

          Technical details
          turning diameter over bed 660 mm︱turning diameter over slide rest 420 mm︱turning length 2000 mm︱turning diameter in the gap 840 mm︱turning speeds 36 - 1600 U/min︱centre height 330 mm︱spindle bore 103 mm︱tailstock quill taper MT 5 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 11 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,6 x 1,1 x 1,45 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 660 mm
            turning diameter over slide rest 420 mm
            turning length 2000 mm
            turning diameter in the gap 840 mm
            turning speeds 36 - 1600 U/min
            centre height 330 mm
            spindle bore 103 mm
            tailstock quill taper MT 5 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 11 kW
            weight of the machine ca. 3,2 t
            dimensions of the machine ca. 3,6 x 1,1 x 1,45 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 420-N

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78055 · Center Lathe

          KAMI - DKM 420-N - - -neu- -

          Technical details
          turning diameter over bed 420 mm︱turning diameter over slide rest 250 mm︱turning length 1000 mm︱turning diameter in the gap 580 mm︱turning speeds 45 - 1800 U/min︱centre height 210 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 MK︱total power requirement 4,4 kW︱weight of the machine ca. 1,5 t︱dimensions 1,95 x 0,85 x 1,35 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 420 mm
            turning diameter over slide rest 250 mm
            turning length 1000 mm
            turning diameter in the gap 580 mm
            turning speeds 45 - 1800 U/min
            centre height 210 mm
            spindle bore 52 mm
            tailstock quill taper MT 4 MK
            total power requirement 4,4 kW
            weight of the machine ca. 1,5 t
            dimensions 1,95 x 0,85 x 1,35 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe SAEILO CONTUR SJ-470 / 1000 S

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78061 · Center Lathe

          SAEILO - CONTUR SJ-470 / 1000 S - - -Neu- -

          Technical details
          turning diameter over bed 470 mm︱turning diameter over slide rest 300 mm︱turning length 1000 mm︱spindle bore 58 mm︱turning speeds 20-2000 U/min︱total power requirement 5,5 kW︱weight of the machine ca. 1800 t︱dimensions of the machine ca. m︱
            turning diameter over bed 470 mm
            turning diameter over slide rest 300 mm
            turning length 1000 mm
            spindle bore 58 mm
            turning speeds 20-2000 U/min
            total power requirement 5,5 kW
            weight of the machine ca. 1800 t
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 410L

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78052 · Center Lathe

          KAMI - DKM 410L - - -neu- -

          Technical details
          turning diameter over bed 410 mm︱turning diameter over slide rest 240 mm︱turning length 1000 mm︱turning diameter in the gap 530 mm︱turning speeds 65 - 1810 U/min︱centre height 205 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,9 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,3 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 410 mm
            turning diameter over slide rest 240 mm
            turning length 1000 mm
            turning diameter in the gap 530 mm
            turning speeds 65 - 1810 U/min
            centre height 205 mm
            spindle bore 52 mm
            tailstock quill taper MT 4
            total power requirement 2,2 kW
            weight of the machine ca. 0,9 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,3 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 420

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78053 · Center Lathe

          KAMI - DKM 420 - - -neu- -

          Technical details
          turning diameter over bed 420 mm︱turning diameter over slide rest 250 mm︱turning length 1000 mm︱turning diameter in the gap 580 mm︱turning speeds 45 - 1800 U/min︱centre height 210 mm︱spindle bore 52 mm︱tailstock quill taper MT 4 ︱total power requirement 4,4 kW︱weight of the machine ca. 1,6 t︱dimensions of the machine ca. 1,94 x 0,85 x 1,32 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 420 mm
            turning diameter over slide rest 250 mm
            turning length 1000 mm
            turning diameter in the gap 580 mm
            turning speeds 45 - 1800 U/min
            centre height 210 mm
            spindle bore 52 mm
            tailstock quill taper MT 4
            total power requirement 4,4 kW
            weight of the machine ca. 1,6 t
            dimensions of the machine ca. 1,94 x 0,85 x 1,32 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 460

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78056 · Center Lathe

          KAMI - DKM 460 - - -neu- -

          Technical details
          turning diameter over bed 460 mm︱turning diameter over slide rest 290 mm︱turning length 1000 mm︱turning diameter in the gap 700 mm︱turning speeds 25 - 1800 U/min︱centre height 230 mm︱spindle bore 80 mm︱tailstock quill taper MT 5 MK︱total power requirement 5,5 kW︱weight of the machine ca. 2,35 t︱dimensions of the machine ca. 2,31 x 1,0 x 1,25 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 460 mm
            turning diameter over slide rest 290 mm
            turning length 1000 mm
            turning diameter in the gap 700 mm
            turning speeds 25 - 1800 U/min
            centre height 230 mm
            spindle bore 80 mm
            tailstock quill taper MT 5 MK
            total power requirement 5,5 kW
            weight of the machine ca. 2,35 t
            dimensions of the machine ca. 2,31 x 1,0 x 1,25 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 332-1

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78050 · Center Lathe

          KAMI - DKM 332-1 - - -neu- -

          Technical details
          turning diameter over bed 330 mm︱turning diameter over slide rest 178 mm︱turning length 1000 mm︱turning diameter in the gap 450 mm︱turning speeds 70 - 2000 U/min︱centre height 165 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 ︱total power requirement 1,1 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 1,9 x 0,72 x 1,4 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 330 mm
            turning diameter over slide rest 178 mm
            turning length 1000 mm
            turning diameter in the gap 450 mm
            turning speeds 70 - 2000 U/min
            centre height 165 mm
            spindle bore 38 mm
            tailstock quill taper MT 3
            total power requirement 1,1 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 1,9 x 0,72 x 1,4 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 500 S

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78059 · Center Lathe

          KAMI - DKM 500 S - - -neu- -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 2000 mm︱turning diameter in the gap 710 mm︱turning speeds 36 - 1600 U/min︱centre height 250 mm︱spindle bore 103 mm︱tailstock quill taper MT 5 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 7,5 kW︱weight of the machine ca. 3,15 t︱dimensions of the machine ca. 3,65 x 1,0 x 1,3 m︱
          Highlights - Large 103mm spindle bore - High cutting performance, optimum cutting results - Electromechanical spindle brake - Sophisticated gear design for transmitting the engine power in high Torques and strong cutting forces - Tuned, stiff construction for the absorption of large cutting forces - Tailstock construction with large radius for the machining of long waves - Feed operation via one-hand lever technology with rapid traverse function Delivery: 3-jaw chuck 315 mm, 4-jaw face chuck 400 mm, 1 piece running bezel, 1 piece standing bezel, 120-250 mm passage.
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 2000 mm
            turning diameter in the gap 710 mm
            turning speeds 36 - 1600 U/min
            centre height 250 mm
            spindle bore 103 mm
            tailstock quill taper MT 5 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 7,5 kW
            weight of the machine ca. 3,15 t
            dimensions of the machine ca. 3,65 x 1,0 x 1,3 m
            Description :
            Highlights
            - Large 103mm spindle bore
            - High cutting performance, optimum cutting results
            - Electromechanical spindle brake
            - Sophisticated gear design for transmitting the engine power in high
            Torques and strong cutting forces
            - Tuned, stiff construction for the absorption of large cutting forces
            - Tailstock construction with large radius for the machining of long waves
            - Feed operation via one-hand lever technology with rapid traverse function
            Delivery:
            3-jaw chuck 315 mm, 4-jaw face chuck 400 mm, 1 piece
            running bezel, 1 piece standing bezel, 120-250 mm passage.
          Datasheet
          Request / Contact
          used Center Lathe WEIPERT W 560

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-25628 · Center Lathe

          WEIPERT - W 560 - - -

          Technical details
          turning diameter over bed 560 mm︱turning diameter over slide rest 280 mm︱turning diameter in the gap - mm︱turning length 1500 mm︱turning speeds 9 - 900 U/min︱spindle bore 63 mm︱connected load kW︱weight of the machine ca. 3,5 t︱dimensions 3,3 x 1,4 x 1,7 m︱
          Center lathe with - 3-jaw chuck Forkardt F315 - Quick change steel holder IDEAL with 8 pockets - Feed in the upper support - Bezel, diameter max.410mm - coolant system - machine light - Chip tray
            turning diameter over bed 560 mm
            turning diameter over slide rest 280 mm
            turning diameter in the gap - mm
            turning length 1500 mm
            turning speeds 9 - 900 U/min
            spindle bore 63 mm
            weight of the machine ca. 3,5 t
            dimensions 3,3 x 1,4 x 1,7 m
            Description :
            Center lathe with
            - 3-jaw chuck Forkardt F315
            - Quick change steel holder IDEAL with 8 pockets
            - Feed in the upper support
            - Bezel, diameter max.410mm
            - coolant system
            - machine light
            - Chip tray
          Datasheet
          Request / Contact
          used Center Lathe TOS SUI 50A / 1000

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-25625 · Center Lathe

          TOS - SUI 50A / 1000 - - -

          Technical details
          turning diameter over bed 510 mm︱turning diameter over slide rest 320 mm︱turning diameter in the gap - mm︱turning length 1000 mm︱turning speeds 11,2 - 2240 U/min︱spindle bore 56 mm︱connected load 12,0 kW︱weight of the machine ca. 2,7 t︱dimensions 2,7 x 1,4 x 1,6 m︱
          Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light
            turning diameter over bed 510 mm
            turning diameter over slide rest 320 mm
            turning diameter in the gap - mm
            turning length 1000 mm
            turning speeds 11,2 - 2240 U/min
            spindle bore 56 mm
            connected load 12,0 kW
            weight of the machine ca. 2,7 t
            dimensions 2,7 x 1,4 x 1,6 m
            Description :
            Center lathe with
            - digital display
            - 4-jaw chuck Röhm 250mm
            - Multifix steel holder
            - follow along. Bezel
            - steady rest max. 135mm
            - Chip protection wall
            - Chip tray
            - coolant system
            - machine light
          Datasheet
          Request / Contact
          used Center Lathe WMW DWLZ 400 / IV

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-25623 · Center Lathe

          WMW - DWLZ 400 / IV - - -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 220 mm︱turning diameter in the gap - mm︱turning length 1000 mm︱turning speeds 28 - 1400 U/min︱spindle bore 58 mm︱connected load 7,9 kW︱weight of the machine ca. 2,5 t︱dimensions 2,9 x 1,3 x 1,4 m︱
          Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light
            turning diameter over bed 400 mm
            turning diameter over slide rest 220 mm
            turning diameter in the gap - mm
            turning length 1000 mm
            turning speeds 28 - 1400 U/min
            spindle bore 58 mm
            connected load 7,9 kW
            weight of the machine ca. 2,5 t
            dimensions 2,9 x 1,3 x 1,4 m
            Description :
            Center lathe with
            - digital display
            - 4-jaw chuck Röhm 250mm
            - Multifix steel holder
            - follow along. Bezel
            - steady rest max. 135mm
            - Chip protection wall
            - Chip tray
            - coolant system
            - machine light
          Datasheet
          Request / Contact
          used Center Lathe IMATEC ID 175

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-25606 · Center Lathe

          IMATEC - ID 175 - - -

          Technical details
          turning diameter over bed 380 mm︱turning diameter over slide rest 220 mm︱turning length 1100 mm︱turning speeds 35,5 - 1600 U/min︱spindle bore 41 mm︱taper in tailstock MT 5 ︱connected load 3,5 kW︱weight of the machine ca. 1,1 t︱dimensions 2,2 x 1,0 x 1,2 m︱
            turning diameter over bed 380 mm
            turning diameter over slide rest 220 mm
            turning length 1100 mm
            turning speeds 35,5 - 1600 U/min
            spindle bore 41 mm
            taper in tailstock MT 5
            connected load 3,5 kW
            weight of the machine ca. 1,1 t
            dimensions 2,2 x 1,0 x 1,2 m
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 500 S

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78058 · Center Lathe

          KAMI - DKM 500 S - - -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 1000 mm︱turning diameter in the gap 710 mm︱turning speeds 36 - 1600 U/min︱centre height 250 mm︱spindle bore 103 mm︱tailstock quill taper MT 5 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,75 t︱dimensions of the machine ca. 2,5 x 1,1 x 1,4 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 1000 mm
            turning diameter in the gap 710 mm
            turning speeds 36 - 1600 U/min
            centre height 250 mm
            spindle bore 103 mm
            tailstock quill taper MT 5 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,75 t
            dimensions of the machine ca. 2,5 x 1,1 x 1,4 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe WMW DLZ 355 x 2000

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-25622 · Center Lathe

          WMW - DLZ 355 x 2000 - - -

          Technical details
          turning diameter over bed 360 mm︱turning diameter over slide rest 200 mm︱turning diameter in the gap - mm︱turning length 2000 mm︱turning speeds 18 - 2500 U/min︱spindle bore 35 mm︱connected load 5,8 kW︱weight of the machine ca. 2,4 t︱dimensions 3,4 x 1,2 x 1,3 m︱
          Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light
            turning diameter over bed 360 mm
            turning diameter over slide rest 200 mm
            turning diameter in the gap - mm
            turning length 2000 mm
            turning speeds 18 - 2500 U/min
            spindle bore 35 mm
            connected load 5,8 kW
            weight of the machine ca. 2,4 t
            dimensions 3,4 x 1,2 x 1,3 m
            Description :
            Center lathe with
            - digital display
            - 4-jaw chuck Röhm 250mm
            - Multifix steel holder
            - follow along. Bezel
            - steady rest max. 135mm
            - Chip protection wall
            - Chip tray
            - coolant system
            - machine light
          Datasheet
          Request / Contact
          used Center Lathe HBM 330 x 600

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78063 · Center Lathe

          HBM - 330 x 600 - - -

          Technical details
          turning diameter over bed 320 mm︱turning diameter over slide rest 220 mm︱turning length 600 mm︱turning diameter in the gap 320 mm︱turning speeds 60 - 1650 U/min︱centre height 160 mm︱spindle bore 38 mm︱tailstock quill taper MT 3 MK︱connected load frequency 400 V︱total power requirement 1,1 kW︱weight of the machine ca. 340 Kg︱dimensions of the machine ca. 1,4 x 0,75 x 0,7 m︱
          Center lathe with: 3-jaw chuck 160 mm. 4-jaw chuck 200 mm. Faceplate 200mm Fixed bezel Continuous bezel 4-way steel holder. Halogen machine light Chip tray, chip protection wall Hardened and ground bed tracks Longitudinal and cross feed Complete coolant system Forage protection Set of change gears Machine tools
            turning diameter over bed 320 mm
            turning diameter over slide rest 220 mm
            turning length 600 mm
            turning diameter in the gap 320 mm
            turning speeds 60 - 1650 U/min
            centre height 160 mm
            spindle bore 38 mm
            tailstock quill taper MT 3 MK
            connected load frequency 400 V
            total power requirement 1,1 kW
            weight of the machine ca. 340 Kg
            dimensions of the machine ca. 1,4 x 0,75 x 0,7 m
            Description :
            Center lathe with:
            3-jaw chuck 160 mm.
            4-jaw chuck 200 mm.
            Faceplate 200mm
            Fixed bezel
            Continuous bezel
            4-way steel holder.
            Halogen machine light
            Chip tray, chip protection wall
            Hardened and ground bed tracks
            Longitudinal and cross feed
            Complete coolant system
            Forage protection
            Set of change gears
            Machine tools
          Datasheet
          Request / Contact
          used Center Lathe KAMI DKM 560.2

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78057 · Center Lathe

          KAMI - DKM 560.2 - - -

          Technical details
          turning diameter over bed 560 mm︱turning diameter over slide rest 355 mm︱turning length 2000 mm︱turning diameter in the gap 790 mm︱turning speeds 20 - 1800 U/min︱centre height 380 mm︱spindle bore 80 mm︱tailstock quill taper MT 2,8 MK︱tailstock travel 150 mm︱tailstock quill diameter 75 mm︱total power requirement 5,5 kW︱weight of the machine ca. 3,4 t︱dimensions of the machine ca. 3,5 x 1,15 x 1,3 m︱
          • 80 mm spindle passage • Gears hardened and ground • manual central lubrication • adjustable main spindle bearings • Overload clutch in the lock case • bed bridge • incl. 3 - axis digital display
            turning diameter over bed 560 mm
            turning diameter over slide rest 355 mm
            turning length 2000 mm
            turning diameter in the gap 790 mm
            turning speeds 20 - 1800 U/min
            centre height 380 mm
            spindle bore 80 mm
            tailstock quill taper MT 2,8 MK
            tailstock travel 150 mm
            tailstock quill diameter 75 mm
            total power requirement 5,5 kW
            weight of the machine ca. 3,4 t
            dimensions of the machine ca. 3,5 x 1,15 x 1,3 m
            Description :
            • 80 mm spindle passage
            • Gears hardened and ground
            • manual central lubrication
            • adjustable main spindle bearings
            • Overload clutch in the lock case
            • bed bridge
            • incl. 3 - axis digital display
          Datasheet
          Request / Contact
          used Center Lathe HBM 360 x 1000 DRO

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78062 · Center Lathe

          HBM - 360 x 1000 DRO - - -

          Technical details
          turning diameter over bed 360 mm︱turning diameter over slide rest 220 mm︱turning length 1000 mm︱turning diameter in the gap 500 mm︱turning speeds 70 - 2000 U/min︱centre height 180 mm︱spindle bore 38 mm︱tailstock quill taper MT 4 ︱connected load frequency 400 V︱total power requirement 1,5 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,56 m︱
          Center lathe with - 3-jaw chuck F 315 - Fixed tailstock top - Multifix holder - 2-axis digital display - Fixed Lynette 180 mm - Coolant system - rapid traverse
            turning diameter over bed 360 mm
            turning diameter over slide rest 220 mm
            turning length 1000 mm
            turning diameter in the gap 500 mm
            turning speeds 70 - 2000 U/min
            centre height 180 mm
            spindle bore 38 mm
            tailstock quill taper MT 4
            connected load frequency 400 V
            total power requirement 1,5 kW
            weight of the machine ca. 0,75 t
            dimensions of the machine ca. 1,9 x 0,8 x 1,56 m
            Description :
            Center lathe with
            - 3-jaw chuck F 315
            - Fixed tailstock top
            - Multifix holder
            - 2-axis digital display
            - Fixed Lynette 180 mm
            - Coolant system
            - rapid traverse
          Datasheet
          Request / Contact
          used Center Lathe WMW DLZ 630 x 2000

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-25619 · Center Lathe

          WMW - DLZ 630 x 2000 - - -

          Technical details
          turning diameter over bed 630 mm︱turning diameter over slide rest 310 mm︱turning diameter in the gap - mm︱turning length 2000 mm︱turning speeds 28 - 1120 U/min︱spindle bore 78 mm︱connected load 7,4 kW︱weight of the machine ca. 4,8 t︱dimensions 4,5 x 1,3 x 1,7 m︱
          Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light
            turning diameter over bed 630 mm
            turning diameter over slide rest 310 mm
            turning diameter in the gap - mm
            turning length 2000 mm
            turning speeds 28 - 1120 U/min
            spindle bore 78 mm
            connected load 7,4 kW
            weight of the machine ca. 4,8 t
            dimensions 4,5 x 1,3 x 1,7 m
            Description :
            Center lathe with
            - digital display
            - 4-jaw chuck Röhm 250mm
            - Multifix steel holder
            - follow along. Bezel
            - steady rest max. 135mm
            - Chip protection wall
            - Chip tray
            - coolant system
            - machine light
          Datasheet
          Request / Contact
          used Center Lathe WEIPERT WG 425

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-25621 · Center Lathe

          WEIPERT - WG 425 - - -

          Technical details
          turning diameter over bed 420 mm︱turning diameter over slide rest 240 mm︱turning diameter in the gap - mm︱turning length 1000 mm︱turning speeds 18 - 1800 U/min︱spindle bore 43 mm︱taper in tailstock MT MK 4 ︱connected load kW︱weight of the machine ca. 2,1 t︱dimensions 2,55 x 1,2 x 1,7 m︱
          Center lathe with - digital display - 4-jaw chuck Röhm 250mm - Multifix steel holder - follow along. Bezel - steady rest max. 135mm - Chip protection wall - Chip tray - coolant system - machine light
            turning diameter over bed 420 mm
            turning diameter over slide rest 240 mm
            turning diameter in the gap - mm
            turning length 1000 mm
            turning speeds 18 - 1800 U/min
            spindle bore 43 mm
            taper in tailstock MT MK 4
            weight of the machine ca. 2,1 t
            dimensions 2,55 x 1,2 x 1,7 m
            Description :
            Center lathe with
            - digital display
            - 4-jaw chuck Röhm 250mm
            - Multifix steel holder
            - follow along. Bezel
            - steady rest max. 135mm
            - Chip protection wall
            - Chip tray
            - coolant system
            - machine light
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used Lathe - cycle-controlled SAEILO CONTUR Dialog H-72

          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland
          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-78103 · Lathe - cycle-controlled

          SAEILO - CONTUR Dialog H-72 - - - 840D SL + ShopTurn Siemens

          Technical details
          turning diameter 720 mm︱turning length 2000 mm︱control 840D SL + ShopTurn Siemens︱greates pass round over bed 720 mm︱swing diameter over face slide 460 mm︱bed width 433 mm︱turning speed range - main spindle max. 2.500 U/min︱power capacity - main spindel 18,5 kW︱spindle bore 105 mm︱spindle head D 1-8 ︱diameter of quill 100 mm︱taper of center MK 5 ︱quill stroke 200 mm︱weight of the machine ca. 6,1 t︱dimensions 4,3 x 2,35 x 2,15 m︱
          Lathe cycle controled VDF BOEHRINGER - DUS 560 / 3000
            turning diameter 720 mm
            turning length 2000 mm
            control 840D SL + ShopTurn Siemens
            greates pass round over bed 720 mm
            swing diameter over face slide 460 mm
            bed width 433 mm
            turning speed range - main spind. max. 2.500 U/min
            power capacity - main spindel 18,5 kW
            spindle bore 105 mm
            spindle head D 1-8
            diameter of quill 100 mm
            taper of center MK 5
            quill stroke 200 mm
            weight of the machine ca. 6,1 t
            dimensions 4,3 x 2,35 x 2,15 m
            Description :
            Lathe cycle controled
            VDF BOEHRINGER - DUS 560 / 3000
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   
            •

            Trader Profile:   WMT GmbH & Co.kg

          Contact Trader



            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47">+49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de

          Profile of Trader

          Welcome to WMT machine tools

          Purchase and sale of new and used machine tools.
          Sales of workshop equipment
          Purchase of used machine tools
          Processing of operating resolutions
          Mediation of complete production facilities

          Trade of machine tools of any kind. Are you looking for a used machine? Visit us…

          Aluminium Circular Saw Band Saw Band Saw - Automatic Band Saw - Automatic - Horizontal Band Saw - Vertical Bandsaw - HorizontalBandsaw mobile Bed Type Milling Machine - Universal Belt Grinding Machine Bench Drilling Machine Bench Lathe Boring Machine - Automatic Center Lathe CNC Lathe - Inclined Bed Type Cold Circular Saw Drilling and Milling M/C Flanging and Seam Rolling Machine Flat and plate processing Folding Machine Hand-Operated Press Heavy Duty Lathe High-Speed Radial Drilling Machine Hydr. pressbrake Hydraulic Press Lathe - cycle-controlled Notching Machine Piercing Press Pillar Drilling Machine Pipe-Bending Machine Plate Shear - Hydraulic Plate Shear - Mechanical Pneumatic Press Profile-Bending Machine Radial Drilling Machine Roller tracks / stop systems Rolls bending machine - 3 Rolls Rotary Welding Table Saw-Blade Sharpening Machine Section Shear - Combined Sheet metal working machine Sliding bed lathe Straightening Press - Double Column Surface Grinding Machine Table Type Boring and Milling Machine Thread-Cutting Machine Toggle Press - Single Column Tool Grinder - Universal tool presetter Tool Room Milling Machine - Universal Tryout Press - hydraulic Universal Milling Machine Vessel Turning Unit Welding Smoke Suction Welding Table Welding table equipment Wheel Stand Drawer cabinets pallet truck electric pallet trucks by hand Tool cabinets Tool trolleys Workbenchescantilever shelving system Container Fork Lift Truck - Electrical Heavy Goods Trailer Hoist Traverse Lift table Load magnet Sandblasting Machine bolster plate Chuck Clamping Chuck Clamping Table Cross-Moving-Table Faceplate Lynette Rotary Table Vise

          WMT GmbH & Co.KG

          Siemensstraße 1

          46342 Velen-Ramsdorf
          FON: +49 2863 92477-47
          FAX: +49 2863 92477-50
          E-Mail: info@w-m-t.de



          WMT GmbH & Co.kg 46342 Velen-Ramsdorf Siemensstraße 1 Deutschland
          WMT GmbH & Co.kg

          Siemensstraße 1



          Contact Trader


            WMT GmbH & Co.kg
           Siemensstraße 1
            46342 Velen-Ramsdorf
            Deutschland
            +49 2863 92477-47
            +49 2863 92477-50
            info@w-m-t.de
            www.w-m-t.de
            Contact person:
           

          Trader Profile



          Machine category


          · Abkantpresse - hydraulisch · Alu-Kreissäge · Aufspanntisch · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Bandsäge - Vertikal · Bandsäge mobil · Bandsägeautomat - Horizontal · Bandsägemaschine · Bearbeitungszentrum - Vertikal · Behälterdrehvorrichtung · Biegemaschine horizontal · Blechbearbeitungsanlagen · Blechbiegemaschine - 3 Walzen · Bohr- und Fräsmaschine · Bohrautomat · Bohrerschleifmaschine · Bürstenentgrater · Doppelschleifbock · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Flachstahl- / Plattenbearbeitung · Futter · Gabelhubwagen Elektro · Gabelhubwagen Hand · Gabelstapler - Elektro · Generatoren · Gewindebohrmaschine · Gleitschleifanlage · Handhebelpresse · Handwerkzeuge · Hubtische · Kaltkreissäge · Kaltkreissäge - Automatik · Keilnutenstoßmaschine · Keilnutenziehmaschine · Kniehebelpresse - Einständer · Kombi-Schleifmaschine · Kompressoren · Krananlagen · Kreuztisch · Kühlmittelanlage · Langgutregale · Lasthebemagnete · Leit- und Zugspindeldrehmaschine · Lochstanze - Einständer · Lynette · Magnetbohrmaschine · Magnetspannplatte · Maschinenleuchten · Messerschleifmaschine · Planscheibe · Plasmaschneidgerät · Pneumatische Presse · Polierbock · Profil- Ring- Biegemaschine · Radialbohrmaschine · Regalsysteme · Reinigungssysteme · Richtpresse - Doppelständer · Rohrausschleifer · Rohrbiegemaschine · Rollenbahnen / Anschlag-Systeme · Rundtisch · Räumnadeln · Schraubenkompressor · Schraubstock · Schubladenschränke · Schweißanlage · Schweißdrehtisch · Schweißrauchabsaugung · Schweißtisch · Schweißtisch-Zubehör · Schwenkbiegemaschine · Schwerlastanhänger · Sicken- und Bördelmaschine · Sonstige Fördertechnik · Sonstige Hubwagen · Sonstige Lagertechnik · Sonstiges · Strahlanlage · Sägeblattschärfmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Tischbohrwerk · Tischdrehbank · Trowalisiermaschine · Unterstellbock · Wasserpumpe · Werkbänke · Werkstattpressen - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschränke · Werkzeugwagen ·
          Compendium
          Software
          Used machines content
          Privacy
          Follow us
          ©2000 - 2021, Logotech oHG · Software- and Internet Services - All rights reserved