European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Leyendecker & Hollmann GmbH Werkzeugmaschinen - Machine Tools - Stockist for used machines

          Machinelist:


          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center EMCO MAXX TURN 110 x 1.500


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03151 · CNC Turning- and Milling Center

          EMCO - MAXX TURN 110 x 1.500 - - 2007 - Sinumerik 840D - shopturn

          Technical details
          x-axis 410 mm︱z-axis 1560 mm︱control Sinumerik 840D - shopturn ︱main spindle A2-11" ︱power requirement 42 kW︱turning speed range 0-2.500 U/min︱turning diameter max. 610 mm︱swing diameter max. over cross slide 550 mm︱swing over bed 820 mm︱centre distance 1500 mm︱tailstock travel 820 mm︱steady stroke 1020 mm︱total power requirement 42 kW︱weight of the machine ca. 16 t︱dimensions of the machine ca. 7,2 x 2,4 x 2,85 m︱
          Equipment / Accessories: - chip conveyor,coolant device - approx. 60 nos. tool holder(standard and driven) - documentation tool turret: - number of stations 12 - taper VDI (DIN 69880)50 mm - max. coolant pressure 25 bar driven tools: - number of driven stations 12 - coupling DIN 5480 - speed range 0-4000 U/min - Antriebsleistung (25% ED) 10 kW C-axis: - resolution 0,001° - rapid traverse speed 1000 rpm
            x-axis 410 mm
            z-axis 1560 mm
            control Sinumerik 840D - shopturn
            main spindle A2-11"
            power requirement 42 kW
            turning speed range 0-2.500 U/min
            turning diameter max. 610 mm
            swing diameter max. over cross s. 550 mm
            swing over bed 820 mm
            centre distance 1500 mm
            tailstock travel 820 mm
            steady stroke 1020 mm
            total power requirement 42 kW
            weight of the machine ca. 16 t
            dimensions of the machine ca. 7,2 x 2,4 x 2,85 m
            Description :
            Equipment / Accessories:

            - chip conveyor,coolant device
            - approx. 60 nos. tool holder(standard and driven)
            - documentation


            tool turret:

            - number of stations 12
            - taper VDI (DIN 69880)50 mm
            - max. coolant pressure 25 bar

            driven tools:

            - number of driven stations 12
            - coupling DIN 5480
            - speed range 0-4000 U/min
            - Antriebsleistung (25% ED) 10 kW


            C-axis:

            - resolution 0,001°
            - rapid traverse speed 1000 rpm


          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled WEILER E 175


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03141 · Lathe - cycle-controlled

          WEILER - E 175 - - 2012 - cycle-controlled

          Technical details
          turning diameter 1750 mm︱turning length 4000 mm︱control cycle-controlled ︱centre height 875 mm︱centre distance 4000 mm︱swing in the crank max. 1850 mm︱length of the crank in front of the faceplate 575 mm︱max. workpiece weight 14000 kg︱working spindle: ︱number of gear stages 2 ︱turning speed range 1-700 1/min︱spindle bore 262 mm︱faceplate diameter max. 1400 mm︱chucking diameter max. 800 mm︱max. torque 13600 Nm︱Slide: ︱worktool system Sauter 4-fold ︱longitudinal stroke 4000 mm︱face stroke 790 mm︱Tailstock:
          Equipment/ accessories: - 1 steady rest - 1 boring bar holder - div. steel holder - documentation
            turning diameter 1750 mm
            turning length 4000 mm
            control cycle-controlled
            centre height 875 mm
            centre distance 4000 mm
            swing in the crank max. 1850 mm
            length of the crank in front of . 575 mm
            max. workpiece weight 14000 kg
            number of gear stages 2
            turning speed range 1-700 1/min
            spindle bore 262 mm
            faceplate diameter max. 1400 mm
            chucking diameter max. 800 mm
            max. torque 13600 Nm
            worktool system Sauter 4-fold
            longitudinal stroke 4000 mm
            face stroke 790 mm
            Description :
            Equipment/ accessories:
            - 1 steady rest
            - 1 boring bar holder
            - div. steel holder
            - documentation
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine RASOMA DZS 125


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03125 · Vertical Turning Machine

          RASOMA - DZS 125 - - 2014 - Siemens 840D sl

          Technical details
          turning diameter ca. 200 mm︱swing diameter 320 mm︱turning height ca. 300 mm︱faceplate diameter 125 mm︱control Siemens 840D sl ︱chuck diameter 125 mm︱x-axis 720/1520/2320 mm︱y-axis +/- 40 mm︱z-axis 300 mm︱rapid traverse X-axis 80 m/min︱rapid traverse Z-axis 60 m/min︱max. turning speed 4000 U/min︱total power requirement 60 kW︱weight of the machine ca. 12 t︱
            turning diameter ca. 200 mm
            swing diameter 320 mm
            turning height ca. 300 mm
            faceplate diameter 125 mm
            control Siemens 840D sl
            chuck diameter 125 mm
            x-axis 720/1520/2320 mm
            y-axis +/- 40 mm
            z-axis 300 mm
            rapid traverse X-axis 80 m/min
            rapid traverse Z-axis 60 m/min
            max. turning speed 4000 U/min
            total power requirement 60 kW
            weight of the machine ca. 12 t
            Description :

          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column UMARO SC53CC


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03165 · Vertical Turret Lathe - Double Column

          UMARO - SC53CC - - 2008 -

          Technical details
          faceplate diameter 4000 mm︱swing diameter 5300 mm︱turning height 1800 mm︱workpiece weight max. 18 t︱ram head - vertical travel 1200 mm︱ram swivable +/- 30 °︱ram head - cross travel 2900 mm︱Main drive 64,5 kW︱number of gear stages 3 ︱faceplate speed 2-90 U/min︱total power requirement 90 kW︱weight of the machine ca. 68 t︱dimensions of the machine ca. 9,8 x 7,4 x 5,4 m︱
          Acessories/Equipment: - 2 vertical supports - face plate with 4 clamping jaws - chip conveyor - documentation
            faceplate diameter 4000 mm
            swing diameter 5300 mm
            turning height 1800 mm
            workpiece weight max. 18 t
            ram head - vertical travel 1200 mm
            ram swivable +/- 30 °
            ram head - cross travel 2900 mm
            Main drive 64,5 kW
            number of gear stages 3
            faceplate speed 2-90 U/min
            total power requirement 90 kW
            weight of the machine ca. 68 t
            dimensions of the machine ca. 9,8 x 7,4 x 5,4 m
            Description :
            Acessories/Equipment:

            - 2 vertical supports
            - face plate with 4 clamping jaws
            - chip conveyor
            - documentation
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Double Column PIETRO CARNAGHI AP 80 TM


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02941 · Vertical Turret Lathe - Double Column

          PIETRO CARNAGHI - AP 80 TM - - 2002 - Siemens 840C

          Technical details
          faceplate diameter 8000 mm︱swing diameter 8500 mm︱turning height 6550 mm︱control Siemens 840C ︱workpiece weight max. 200 t︱faceplate turning speed range -stepless- 1 - 42 U/min︱max. torque on the faceplate 286000 Nm︱ram head dimension 400 x 400 mm︱ram travel - cross (z-axis) 3200 mm︱ram travel - cross (x-axis) 10850 mm︱cross beam travel - vertical 23 x 13 x 12,4 mm︱ram stroke - vertical 350 mm/min︱rapid traverse of the ram (vertical and cross) 10 m/min︱main drive motor 100 kW︱workpiece drive capacity 55 kW︱total power requirement 187 kW︱weight of the machine ca. 300 t︱dimensions of the machine ca. 23 x 13 x 12,4 m︱
          Equipment / Accessories: - hydrostatic guideways x- and z-axis - tool head changer 12-fold - c-axis with driven tools (ISO 50) - angular milling head with b-axis - facing slide with u-axis - operator platform height adjustable - camera in process control - chip conveyor - KNOLL coolant system - internal coolant supply
            faceplate diameter 8000 mm
            swing diameter 8500 mm
            turning height 6550 mm
            control Siemens 840C
            workpiece weight max. 200 t
            faceplate turning speed range -s. 1 - 42 U/min
            max. torque on the faceplate 286000 Nm
            ram head dimension 400 x 400 mm
            ram travel - cross (z-axis) 3200 mm
            ram travel - cross (x-axis) 10850 mm
            cross beam travel - vertical 23 x 13 x 12,4 mm
            ram stroke - vertical 350 mm/min
            rapid traverse of the ram (verti. 10 m/min
            main drive motor 100 kW
            workpiece drive capacity 55 kW
            total power requirement 187 kW
            weight of the machine ca. 300 t
            dimensions of the machine ca. 23 x 13 x 12,4 m
            Description :
            Equipment / Accessories:
            - hydrostatic guideways x- and z-axis
            - tool head changer 12-fold
            - c-axis with driven tools (ISO 50)
            - angular milling head with b-axis
            - facing slide with u-axis
            - operator platform height adjustable
            - camera in process control
            - chip conveyor
            - KNOLL coolant system
            - internal coolant supply
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal STARRAG HECKERT HEC 630 Athletic


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03164 · Machining Center - Horizontal

          STARRAG HECKERT - HEC 630 Athletic - - 2010 - Sinumerik 840D power line

          Technical details
          x-travel 1200 mm︱y-travel 950 mm︱z-travel 1200 mm︱Control Sinumerik 840D power line︱B-axis: ︱pallet clamping area 800 x 630 mm︱max. load 1500 kg︱workpiece interference circle diameter 1250 mm︱workpiece height max. 1200 mm︱number of exchangeable pallets 2 ︱change time of pallets 14 sec︱working spindle: ︱tool taper HSK-A100 ︱power capacity at 25% load 67 kw︱torque (25% ED) 1508 Nm︱turning speed range 20 - 6000 U/min︱feed speeds x/y/z axis 60000 mm/min︱acceleration X/Y/Z axis 6/6/5 m/s²︱feed capacity X/Y/Z axis 22/18/22 kN︱weight of the machine ca. 25 t︱
          Equipment / Accessories: - CNC control Sinumerik 840D power line - 2 rectangular pallets 800 x 630 mm - increased main drive power up to 37 kW - drive power: at 25% ED = 67 kW / at 100% ED = 37 kW - torque: at 25% ED = 1508 Nm / at 100% ED = 1194 Nm - coolant unit fleece gravity filter - switchable in 7 stages up to max. 50 bar, 1350 l capacity - increase of coolant pressure to 80 bar - surge shower approx. 200 l/min - emission extraction working area - Visiport electric - clamping station platform - optical measuring probe RENISHAW - milling of cylinder paths - memory expansion CNC user memory by 1.0 MB (up to 3x possible) - workload monitoring - automatic optimisation of the B-axis - warm-up program - tool chain magazine 60 places, HSK-A100 - 4 clamping angles - various tool holders and tools - measuring probe - documentation
            x-travel 1200 mm
            y-travel 950 mm
            z-travel 1200 mm
            Control Sinumerik 840D power line
            pallet clamping area 800 x 630 mm
            max. load 1500 kg
            workpiece interference circle di. 1250 mm
            workpiece height max. 1200 mm
            number of exchangeable pallets 2
            change time of pallets 14 sec
            tool taper HSK-A100
            power capacity at 25% load 67 kw
            torque (25% ED) 1508 Nm
            turning speed range 20 - 6000 U/min
            feed speeds x/y/z axis 60000 mm/min
            acceleration X/Y/Z axis 6/6/5 m/s²
            feed capacity X/Y/Z axis 22/18/22 kN
            weight of the machine ca. 25 t
            Description :
            Equipment / Accessories:
            - CNC control Sinumerik 840D power line
            - 2 rectangular pallets 800 x 630 mm
            - increased main drive power up to 37 kW
            - drive power: at 25% ED = 67 kW / at 100% ED = 37 kW
            - torque: at 25% ED = 1508 Nm / at 100% ED = 1194 Nm
            - coolant unit fleece gravity filter
            - switchable in 7 stages up to max. 50 bar, 1350 l capacity
            - increase of coolant pressure to 80 bar
            - surge shower approx. 200 l/min
            - emission extraction working area
            - Visiport electric
            - clamping station platform
            - optical measuring probe RENISHAW
            - milling of cylinder paths
            - memory expansion CNC user memory by 1.0 MB (up to 3x possible)
            - workload monitoring
            - automatic optimisation of the B-axis
            - warm-up program
            - tool chain magazine 60 places, HSK-A100
            - 4 clamping angles
            - various tool holders and tools
            - measuring probe
            - documentation
          Datasheet
          Request / Contact

          Ram-Type Floor Boring and Milling M/C

          used  Ram-Type Floor Boring and Milling M/C COLGAR FRAL 400


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03166 · Ram-Type Floor Boring and Milling M/C

          COLGAR - FRAL 400 - - 2004 - Heidenhain iTNC 530

          Technical details
          spindle diameter 150 mm︱x-travel 18000 mm︱y-travel 4500 mm︱z-travel 1250 mm︱w-travel 900 mm︱Control Heidenhain iTNC 530 ︱speed of spindle 5-3.000 rpm︱max. torque 4000 Nm︱tool changer 90 Plätze︱feeds X/Y/Z/W: 20000 mm/min︱tool taper SK 50
          Accessories/Equipment: Power capacity: Spindle (S1) 60 kW Spindle (S2) 80 kW Axis feed Moter 50 Nm -internal an external coolant supply -hydrostatic guideways -without floor plates and table -electrical and mechanical preparation for table and programmable universal head -documentation
            spindle diameter 150 mm
            x-travel 18000 mm
            y-travel 4500 mm
            z-travel 1250 mm
            w-travel 900 mm
            Control Heidenhain iTNC 530
            speed of spindle 5-3.000 rpm
            max. torque 4000 Nm
            tool changer 90 Plätze
            feeds X/Y/Z/W: 20000 mm/min
            tool taper SK 50
            Description :
            Accessories/Equipment:

            Power capacity:
            Spindle (S1) 60 kW
            Spindle (S2) 80 kW
            Axis feed Moter 50 Nm

            -internal an external coolant supply
            -hydrostatic guideways
            -without floor plates and table
            -electrical and mechanical preparation for table and programmable universal head
            -documentation
          Datasheet
          Request / Contact

          Travelling column milling machine

          used  Travelling column milling machine FPT Terus


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03143 · Travelling column milling machine

          FPT - Terus - - 2015 - Siemens 840D

          Technical details
          x-travel 2500 mm︱y-travel 2000 mm︱z-travel 2000 mm︱control Siemens 840D ︱Size of table plate 1500x2000 mm︱table load 12 t︱solution 0.0005 Grad︱Rotating speeds 5 U/min︱spindle drive ︱output 34 kW︱Speed range - up to 400-5000 U/min︱max. torque 830 Nm︱tool magazin: 24 Plätze ︱taper ISO 50 DIN 69871 ︱max. diameter 125-230 mm︱tool length - max. 400 mm︱Payload 20 kg︱coolant ︱Capacity 28 l/min︱0 4 bar︱
          Equipment/ Accessories: - only 8821 working hours The structure of the TERUS cross moving-column machining centre consists of an electro-welded steel construction. The table bed, which can be moved in the longitudinal direction, and the column bed, which can be moved in the cross direction, consist of an electro-welded steel construction. The carriage is made of electro-welded steel to ensure maximum rigidity. The turntable or pallet carrier substructure is made of Meehanite cast GB/300. X, Y and Z axes on hardened and ground linear guides. The turntable or pallet carrier rests on a hydrostatic bearing ring. Machine diagnostic system and diagnostic software system. Other important details are: - max. permissible tilting moment: 87000 Nm - max. working torque: 45000 Nm - Semi-automatic accessory changing system: 34 kW - Shopmill option - infinitely positionable universal head: automatic, double pivoting - Tapping without compensating chuck for mechanical milling heads - Static RTCP in space - Static RTCP for rotary variable tables: This software allows the programming of machining in any position that can be reached by the milling head, without zero offset. The RTCP-TR is also useful for editing with inclined, spherical tool, with continuous head and table movements in all directions. - Chain tool magazine 40 places ISO50 mounted on the floor - Arm for changing the tool in horizontal spindle position - With internal compressed air supply as an alternative to coolant - Wireless probe: Renishaw RMP 60 - Teleservice (remote diagnosis)
            x-travel 2500 mm
            y-travel 2000 mm
            z-travel 2000 mm
            control Siemens 840D
            Size of table plate 1500x2000 mm
            table load 12 t
            solution 0.0005 Grad
            Rotating speeds 5 U/min
            output 34 kW
            Speed range - up to 400-5000 U/min
            max. torque 830 Nm
            tool magazin: 24 Plätze
            taper ISO 50 DIN 69871
            max. diameter 125-230 mm
            tool length - max. 400 mm
            Payload 20 kg
            Capacity 28 l/min
            0 4 bar
            Description :
            Equipment/ Accessories:

            - only 8821 working hours

            The structure of the TERUS cross moving-column machining centre consists of an
            electro-welded steel construction.
            The table bed, which can be moved in the longitudinal direction, and the column
            bed, which can be moved in the cross direction, consist of an electro-welded
            steel construction.
            The carriage is made of electro-welded steel to ensure maximum rigidity.
            The turntable or pallet carrier substructure is made of Meehanite cast GB/300.
            X, Y and Z axes on hardened and ground linear guides.
            The turntable or pallet carrier rests on a hydrostatic bearing ring.
            Machine diagnostic system and diagnostic software system.

            Other important details are:
            - max. permissible tilting moment: 87000 Nm
            - max. working torque: 45000 Nm
            - Semi-automatic accessory changing system: 34 kW
            - Shopmill option
            - infinitely positionable universal head: automatic, double pivoting
            - Tapping without compensating chuck for mechanical milling heads
            - Static RTCP in space
            - Static RTCP for rotary variable tables: This software allows the programming
            of machining in any position that can be reached by the milling head,
            without zero offset. The RTCP-TR is also useful for editing with inclined,
            spherical tool, with continuous head and table movements in all directions.
            - Chain tool magazine 40 places ISO50 mounted on the floor
            - Arm for changing the tool in horizontal spindle position
            - With internal compressed air supply as an alternative to coolant
            - Wireless probe: Renishaw RMP 60
            - Teleservice (remote diagnosis)
          Datasheet
          Request / Contact

          Bevel Gear Generator - Spiral

          used  Bevel Gear Generator - Spiral KLINGELNBERG KNC 25 P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02478 · Bevel Gear Generator - Spiral

          KLINGELNBERG - KNC 25 P - - 1997 -

          Technical details
          max. wheel diameter 275 mm︱gear width 150 mm︱max. module 6 ︱min. module 1.5 ︱max. workpiece diameter 275 mm︱tooth width max. 5.5 mm︱spiral angle 0 - 60 °︱number of teeth 5 - 120 ︱transmission ratio min. 1:1 ︱transmission ratio max. 1:10 ︱milling drive motor 20 kW︱workpiece drive 14.5 kW︱total power requirement 62 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,7 x 4,387 x 2,45 m︱
          Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -
            max. wheel diameter 275 mm
            gear width 150 mm
            max. module 6
            min. module 1.5
            max. workpiece diameter 275 mm
            tooth width max. 5.5 mm
            spiral angle 0 - 60 °
            number of teeth 5 - 120
            transmission ratio min. 1:1
            transmission ratio max. 1:10
            milling drive motor 20 kW
            workpiece drive 14.5 kW
            total power requirement 62 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,7 x 4,387 x 2,45 m
            Description :
            Tool spindle (D-axis)
            - workpiece spindle speed (infinitely) 60 to 350 r.p.m.

            Tool positioning axis (E-axis)
            - swivel range 0 to 360°
            - swivel speed max. 19.5°/s

            Workpiece spindle (B-axis)
            - mounting diameter outer cone (1: 4) 140 mm
            - standard internal cone (1:20) 99.218 mm
            - workpiece spindle speed max. 300 r.p.m.
            - workpiece spindle passage 90 mm

            Workpiece positioning axis (Y-axis)
            - travel 870 mm
            - speed max. 4.5 m/min

            Roller rotation axis (A-axis)
            - swivel range 315°
            - swivel speed max. 40°/s

            Axis intersection (Z-axis)
            - travel range max. +/- 50 mm
            - speed max. 0.657 m/min

            Workpiece swivel axis (C-axis)
            - swivel range -8.5 to 98°
            - swivel speed max. 21.5 °/s

            Milling depth axis (X-axis)
            - travel from -25 to 640 mm
            - max. speed 6 m/min

            Machinen distance (V-axis)
            - travel 150 mm
            - speed max. 1.6 m/min

            - 13 milling cutters included -
          36.000 €
          Datasheet
          Request / Contact

          Gear Grinding Machine

          used  Gear Grinding Machine KAPP KX 300P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03153 · Gear Grinding Machine

          KAPP - KX 300P - - 2004 -

          Technical details
          max. wheel diameter 300 mm︱gear width 250 mm︱max. module 5/10 ︱x-axis 270 mm︱y-axis 250 mm︱z-axis 320 mm︱max. feed 10000 mm/min︱max. workpiece dia. 300 ︱gear hobbing width -max. 250 mm︱max.helical angle +35/-35 °︱total power requirement kW︱weight of the machine ca. 14800 t︱dimensions of the machine ca. 5290 x 4280 x 2620 m︱
            max. wheel diameter 300 mm
            gear width 250 mm
            max. module 5/10
            x-axis 270 mm
            y-axis 250 mm
            z-axis 320 mm
            max. feed 10000 mm/min
            max. workpiece dia. 300
            gear hobbing width -max. 250 mm
            max.helical angle +35/-35 °
            weight of the machine ca. 14800 t
            dimensions of the machine ca. 5290 x 4280 x 2620 m
            Description :

          Datasheet
          Request / Contact

          Gear Shaping Machine

          used  Gear Shaping Machine MAAG SH 250/300 S


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02840 · Gear Shaping Machine

          MAAG - SH 250/300 S - - 1982 -

          Technical details
          max. wheel diameter 3080 mm︱gear width 870 mm︱max. module 50 ︱min. module 25 ︱min. wheel diameter 200 mm︱max. number of teeth 1000 ︱min. number of teeth 12 ︱tool length - max. 312 mm︱min. ram stroke 70 mm︱dividing plate diameter 1116 mm︱table bore diameter 420 mm︱table travel max. 2x460 = 920 mm︱ram stroke speed 3,2 - 40 m/min.︱max. ram stroke 700 mm︱table load 15000 kg︱depth of hole 1200 mm︱max. dia. of teeth cutting 2940 mm︱clamping table diameter 1100 mm︱max.helical angle 35 °︱total power requirement 71 kW︱
          Equipment/Accessories: chip conveyor Local rim support (bed mounted) Internal gear cutting attachment JVS-250 Work base plate Ø1800 mm Longitudinal Correction Device The machine is practically new and will be delivered with a precision chart. Cutting quality DIN 7! The main characteristics of the machine are excellent accuracy and high versatility in producing external gears, internal gears, herringbone gears, double helical gears and gear racks. The outstanding economy of the MAAG SH 250/300 S derives from the high metal removal rate (for material until 1400 N/mm2 and 400 HB) and simplicity of form and long tool life of the roughing cutter, which keeps the tooling costs extremely low. After the roughing operation, the gear teeth are finished machined in the same set-up by the generating method. And that makes it in most of all cases possible, to avoid grinding. With the full swivel cutter ram, any desired helix angle can be set. The finishing generating operation yields a very good tooth accuracy in short machining time. The machining cycles for the plunge cut and the generating operations take place automatically. The vertical working range is so large that even double-helical gears can usually be completely machined without altering the set-up. The cutter ram is driven by a DC reversible motor via a 7-start spindle. Helical gears or double helical gears with a small run-out groove could be cut by a helical rack shaped cutter. When using the swivelling cutter holder for cutting gears with great helix angles the ram stroke could be highly reduced.
            max. wheel diameter 3080 mm
            gear width 870 mm
            max. module 50
            min. module 25
            min. wheel diameter 200 mm
            max. number of teeth 1000
            min. number of teeth 12
            tool length - max. 312 mm
            min. ram stroke 70 mm
            dividing plate diameter 1116 mm
            table bore diameter 420 mm
            table travel max. 2x460 = 920 mm
            ram stroke speed 3,2 - 40 m/min.
            max. ram stroke 700 mm
            table load 15000 kg
            depth of hole 1200 mm
            max. dia. of teeth cutting 2940 mm
            clamping table diameter 1100 mm
            max.helical angle 35 °
            total power requirement 71 kW
            Description :
            Equipment/Accessories:

            chip conveyor
            Local rim support (bed mounted)
            Internal gear cutting attachment JVS-250
            Work base plate Ø1800 mm
            Longitudinal Correction Device

            The machine is practically new and will be delivered with a precision chart.
            Cutting quality DIN 7! The main characteristics of the machine are excellent
            accuracy and high versatility in producing external gears, internal gears,
            herringbone gears, double helical gears and gear racks. The outstanding economy
            of the MAAG SH 250/300 S derives from the high metal removal rate (for material
            until 1400 N/mm2 and 400 HB) and simplicity of form and long tool life of the
            roughing cutter, which keeps the tooling costs extremely low. After the roughing
            operation, the gear teeth are finished machined in the same set-up by the
            generating method. And that makes it in most of all cases possible, to avoid
            grinding. With the full swivel cutter ram, any desired helix angle can be set.
            The finishing generating operation yields a very good tooth accuracy in short
            machining time. The machining cycles for the plunge cut and the generating
            operations take place automatically. The vertical working range is so large that
            even double-helical gears can usually be completely machined without altering
            the set-up. The cutter ram is driven by a DC reversible motor via a 7-start
            spindle. Helical gears or double helical gears with a small run-out groove could
            be cut by a helical rack shaped cutter. When using the swivelling cutter holder
            for cutting gears with great helix angles the ram stroke could be highly
            reduced.
          195.000 €
          Datasheet
          Request / Contact
          used  Gear Shaping Machine LORENZ SJ7/1000


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03123 · Gear Shaping Machine

          LORENZ - SJ7/1000 - - 1960 -

          Technical details
          max. wheel diameter 1000 mm︱gear width 160 mm︱max. module 7 ︱stroke range 31-175 Hübe/min︱total power requirement 5,5 PS︱weight of the machine ca. 5,2 t︱dimensions of the machine ca. 2,65 x 1,4 x 2,9 m︱
          The height of the column is increased by 200 mm. Equipment / Accessories: - various change gears - shaping cutter holder - documentation
            max. wheel diameter 1000 mm
            gear width 160 mm
            max. module 7
            stroke range 31-175 Hübe/min
            total power requirement 5,5 PS
            weight of the machine ca. 5,2 t
            dimensions of the machine ca. 2,65 x 1,4 x 2,9 m
            Description :
            The height of the column is increased by 200 mm.
            Equipment / Accessories:
            - various change gears
            - shaping cutter holder
            - documentation
          Datasheet
          Request / Contact

          Gear Testing Machine

          used  Gear Testing Machine OERLIKON-KLINGELNBERG R30


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03104 · Gear Testing Machine

          OERLIKON-KLINGELNBERG - R30 - - 2007 -

          Technical details
          max. wheel diameter 400 mm︱gear width - mm︱max. module - ︱workpiece dia. 36-300/400 mm︱axis distance 135-290 mm︱spindle turning speed - stepless 3000 1/min︱dist. between centers 100-550 mm︱Control ︱weight of the machine ca. 4000 kg︱dimensions of the machine ca. 2000x3055x2788 mm︱
          Test method: - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)
            max. wheel diameter 400 mm
            gear width - mm
            max. module -
            workpiece dia. 36-300/400 mm
            axis distance 135-290 mm
            spindle turning speed - stepless 3000 1/min
            dist. between centers 100-550 mm
            weight of the machine ca. 4000 kg
            dimensions of the machine ca. 2000x3055x2788 mm
            Description :
            Test method:
            - Single flank rolling test
            - Double flank rolling test
            - Structure-borne noise test
            - Heli testing in two-flank contact.

            Features:
            - Use of up to 6 test slides
            - Highest testing accuracy and repeatability
            - Machine table with workpiece drive
            - Swiveling pneumatic unit
            - Spray oil lubrication (type: Vogel)
            - Oil mist extraction (type: Elbaron)
          Datasheet
          Request / Contact
          used  Gear Testing Machine HÖFLER EMZ 2002 / 2602


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02212 · Gear Testing Machine

          HÖFLER - EMZ 2002 / 2602 - - 1991 -

          Technical details
          max. wheel diameter 20 - 2650 mm︱gear width - mm︱max. module 32 ︱distance between centres 1850 ︱workpiece weight max. 10.000 kg︱table diameter 1100 mm︱
          Machine can be inspected under power. Setting-up and installation at the customers' is possible against extra charges. Equipment / Accessories: - clamping table diameter 1100 mm - steady rest - clamping devices - carriers - levelling shoes - hardware updated to Windows 7 - gears / straight and helical - internal and external gears - measuring of tool cutters (grinding wheels, shaving cutters, milling cutters)
            max. wheel diameter 20 - 2650 mm
            gear width - mm
            max. module 32
            distance between centres 1850
            workpiece weight max. 10.000 kg
            table diameter 1100 mm
            Description :
            Machine can be inspected under power.
            Setting-up and installation at the customers' is possible against extra charges.

            Equipment / Accessories:
            - clamping table diameter 1100 mm
            - steady rest
            - clamping devices
            - carriers
            - levelling shoes
            - hardware updated to Windows 7
            - gears / straight and helical
            - internal and external gears
            - measuring of tool cutters
            (grinding wheels, shaving cutters, milling cutters)
          Datasheet
          Request / Contact

          Spiral Bevel Gear Cutting Machine

          used  Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03108 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 2002 - Sinumerik 840C

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1,5 ︱control Sinumerik 840C ︱tooth width 5,5 mm︱spiral angle 0/60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱transmission ratio max. 1:10 ︱transmission ratio min. 1:1 ︱spindle speeds max. 110 mm︱blade head turning speeds 20-110 1/min︱total power requirement 100 kW︱weight of the machine ca. 16700 kg︱dimensions of the machine ca. 5200x2300x2400 mm︱
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1,5
            control Sinumerik 840C
            tooth width 5,5 mm
            spiral angle 0/60 °
            max. number of teeth 120
            min. number of teeth 5
            transmission ratio max. 1:10
            transmission ratio min. 1:1
            spindle speeds max. 110 mm
            blade head turning speeds 20-110 1/min
            total power requirement 100 kW
            weight of the machine ca. 16700 kg
            dimensions of the machine ca. 5200x2300x2400 mm
            Description :

          Datasheet
          Request / Contact
          used  Spiral Bevel Gear Cutting Machine KLINGELNBERG C 28 P


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-02824 · Spiral Bevel Gear Cutting Machine

          KLINGELNBERG - C 28 P - - 1999 - Sinumerik 840C

          Technical details
          max. wheel diameter 275 mm︱gear width 55 mm︱max. module 6 ︱min. module 1,5 ︱Control Sinumerik 840C ︱tooth width 5,5 mm︱spiral angle 0 / 60 °︱max. number of teeth 120 ︱min. number of teeth 5 ︱transmission ratio max. 1:10 ︱transmission ratio min. 1:1 ︱spindle speeds max. 110 mm︱blade head turning speeds 20-110 U/min︱total power requirement 100 kW︱weight of the machine ca. 16,7 t︱dimensions of the machine ca. 5,2 x 2,3 x 2,4 m︱
          Euipment/ Accessories: - documentation
            max. wheel diameter 275 mm
            gear width 55 mm
            max. module 6
            min. module 1,5
            Control Sinumerik 840C
            tooth width 5,5 mm
            spiral angle 0 / 60 °
            max. number of teeth 120
            min. number of teeth 5
            transmission ratio max. 1:10
            transmission ratio min. 1:1
            spindle speeds max. 110 mm
            blade head turning speeds 20-110 U/min
            total power requirement 100 kW
            weight of the machine ca. 16,7 t
            dimensions of the machine ca. 5,2 x 2,3 x 2,4 m
            Description :
            Euipment/ Accessories:

            - documentation
          Datasheet
          Request / Contact

          Slideway Grinding Machine

          used  Slideway Grinding Machine WEMA-ASCHERSLEBEN SZ 20-12-06


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03029 · Slideway Grinding Machine

          WEMA-ASCHERSLEBEN - SZ 20-12-06 - - 1986 2015 -

          Technical details
          grinding length 6000 mm︱grinding width 2000 mm︱workpiece height 1250 mm︱table surface area 6500 x 2000 mm︱table load with evenly distributed load 5000 kg/m︱distance between columns 2250 mm︱Passage height 1200 mm︱height of the table top edge over the floor ca. 955 mm︱
          The machine was reconditioned in 2015 and equipped with new hydraulics, new control cabinet and new electrics. Equipment / Accessories: - 8 table flutes 26H12 mm, distance 250 mm - dressing device - new hydraulics - many accessories - documentation
            grinding length 6000 mm
            grinding width 2000 mm
            workpiece height 1250 mm
            table surface area 6500 x 2000 mm
            table load with evenly distribut. 5000 kg/m
            distance between columns 2250 mm
            Passage height 1200 mm
            height of the table top edge ove. ca. 955 mm
            Description :
            The machine was reconditioned in 2015 and equipped with new hydraulics,
            new control cabinet and new electrics.

            Equipment / Accessories:
            - 8 table flutes 26H12 mm, distance 250 mm
            - dressing device
            - new hydraulics
            - many accessories
            - documentation
          Datasheet
          Request / Contact

          try-out press

          used  try-out press SWA Hydraulicky lis 250


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03013 · try-out press

          SWA - Hydraulicky lis 250 - - 1998 -

          Technical details
          pressure 250 t︱distance between columns 3500 mm︱stroke 1180 mm︱table surface area 3500 x 1600 mm︱total power requirement 30 kW︱weight of the machine ca. 36 t︱dimensions of the machine ca. 4,8 x 3,0 x 5,5 m︱
          equipent / acessories: - clamping table with support
            pressure 250 t
            distance between columns 3500 mm
            stroke 1180 mm
            table surface area 3500 x 1600 mm
            total power requirement 30 kW
            weight of the machine ca. 36 t
            dimensions of the machine ca. 4,8 x 3,0 x 5,5 m
            Description :
            equipent / acessories:
            - clamping table with support
          54.000 €
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Trader Profile:   Leyendecker & Hollmann GmbH
          Werkzeugmaschinen - Machine Tools

          Contact Trader



            Leyendecker & Hollmann GmbH
          Werkzeugmaschinen - Machine Tools

           Konrad-Zuse-Str. 5
            40789 - Monheim
            Deutschland
            +49 (2173) 22 55 0">+49 (2173) 22 55 0
            +49 (2173) 25627
            info@LHmachine.com
            www.LHmachine.com

          Profile of Trader

          LEYENDECKER & HOLLMANN - SPECIALIST FOR USED MACHINE TOOLS SINCE 1997

          About us

          We are an internationally operating company, dealing with the purchase and selling of used machine tools. Our company was founded in 1997 by graduate engineer Frank Hollmann.

           

          Purchase

          We permanently buy modern, but also well-maintained older machine tools of all kinds. In particular we are interested in gear machines and heavy machinery. We buy single machines as well as complete factory equipments. As we have own technicians and a warehouse with 50 tons crane capacity, we can always act at short notice. We guarantee a faultless carrying out. Of course we always pay for the machines in full before loading.

           

          Sale

          In our warehouse we permanently hold ready ca. 80 well-maintained machine tools for you. After prior notice you are welcome to inspect the machines under power.
          Should you not find the machine you are looking for on our website, please let us know; we will try to get the machine for you.

          We are member of the German Fachverband FDM and connected with several colleagues Europe-wide by database, which enables us to access many further used machine tools.

           

          Our Aim

          Our aim is a long-term, trustful cooperation with our suppliers and our customers.

          CONTACT LEYENDECKER & HOLLMANN GMBH

          Konrad-Zuse-Str. 5
          40789 Monheim am Rhein
          Germany
          Tel (+49) 2173 22 550

          Mo - Th 8:00 - 17:00 Uhr

          Fr 8:00 - 14:00




          Leyendecker  &  Hollmann GmbH Werkzeugmaschinen - Machine Tools  40789 - Monheim Konrad-Zuse-Str. 5 Deutschland
          Leyendecker & Hollmann GmbH Werkzeugmaschinen - Machine Tools

          Konrad-Zuse-Str. 5



          Contact Trader


            Leyendecker & Hollmann GmbH Werkzeugmaschinen - Machine Tools
           Konrad-Zuse-Str. 5
            40789 - Monheim
            Deutschland
            +49 (2173) 22 55 0
            +49 (2173) 25627
            info@LHmachine.com
            www.LHmachine.com
            Contact person:

           




          Machine category


          Bearbeitungszentrum - Horizontal · CNC Dreh- und Fräszentrum · Drehmaschine - zyklengesteuert · Fahrständerfräsmaschine · Führungsbahnschleifmaschine · Karusselldrehmaschine - Doppelständer · Kegelradfräsmaschine-Bogenverzahnung · Plattenbohrwerk - Traghülse · Sonstige · Spiralkegelradschneidmaschine · Vertikaldrehmaschine · Werkzeugprobierpresse · Wälzfräser · Zahnradprüfmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zweiständer - Karusselldrehmaschine ·