European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Plum & Partner Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Bar Automatic Lathe - Multi Spindle

          used  Bar Automatic Lathe - Multi Spindle GILDEMEISTER GS 51-6


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12250 · Bar Automatic Lathe - Multi Spindle

          GILDEMEISTER - GS 51-6 - - 1988 -

          Technical details
          number of spindles 6 ︱spindle passage 50 mm︱turning length 153 mm︱max. material feeding 150 mm︱speeds 19: 184-1151 U/min︱pre-settable workpiece times 54: 3,2 - 119 sec︱main drive motor 22 kW︱total power requirement 30 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 8,5 x 1,7 x 2,3 m︱Electric 380 Volt ︱Chip conveyor ︱Feed change gears ( div. ) ︱Cams ︱Collet devices
          Cam-controlled 6-spindle automatic lathe with 50 mm spindle capacity and 3 m bar feed with stand. Machine under power in sellers factory. The machine is being sold due to a change in production. Machine dealer with own stock of 2500 m².
            number of spindles 6
            spindle passage 50 mm
            turning length 153 mm
            max. material feeding 150 mm
            speeds 19: 184-1151 U/min
            pre-settable workpiece times 54: 3,2 - 119 sec
            main drive motor 22 kW
            total power requirement 30 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 8,5 x 1,7 x 2,3 m
            Description :
            Cam-controlled 6-spindle automatic lathe with 50 mm spindle capacity and 3 m
            bar feed with stand. Machine under power in sellers factory. The machine is
            being sold due to a change in production.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Bar Automatic Lathe - Multi Spindle GILDEMEISTER AS 32


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12253 · Bar Automatic Lathe - Multi Spindle

          GILDEMEISTER - AS 32 - - 1963 -

          Technical details
          number of spindles 6 ︱spindle passage 32 mm︱turning length 100 mm︱max. material feeding 176 mm︱speeds 17: 260-2400 U/min︱pre-settable workpiece times 54: 5 - 205 sec︱main drive motor 15 kW︱weight of the machine ca. 8,2 t︱dimensions of the machine ca. 5,6 x 1,4 x 1,8 m︱Electric 380 Volt ︱Chip conveyor ︱Collet devices ︱Condition: ready for operation ︱Video available on our website.
          Cam-controlled 6-spindle automatic lathe with 32 mm spindle capacity and 3 m bar feed with stand, turning length 100 mm, fast drilling device. Machine under power in sellers factory. The machine is being sold due to a change in production. Machine dealer with own stock of 2500 m².
            number of spindles 6
            spindle passage 32 mm
            turning length 100 mm
            max. material feeding 176 mm
            speeds 17: 260-2400 U/min
            pre-settable workpiece times 54: 5 - 205 sec
            main drive motor 15 kW
            weight of the machine ca. 8,2 t
            dimensions of the machine ca. 5,6 x 1,4 x 1,8 m
            Description :
            Cam-controlled 6-spindle automatic lathe with 32 mm spindle capacity and
            3 m bar feed with stand, turning length 100 mm, fast drilling device. Machine
            under power in sellers factory. The machine is being sold due to a change in
            production.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Bar Automatic Lathe - Multi Spindle PITTLER PRC 50/6


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12254 · Bar Automatic Lathe - Multi Spindle

          PITTLER - PRC 50/6 - - 1962 -

          Technical details
          number of spindles 6 ︱spindle passage 50 mm︱turning length 178 mm︱max. material feeding 254 mm︱speeds 2x17: 117 - 1460 U/min︱pre-settable workpiece times 4,9 - 394 sec︱switching time 2,9 sec︱boring of tool-holders 50,8 mm︱main drive motor 22 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 6 x 1,5 x 2,3 m︱Electric 380 Volt ︱Collet devices ︱Feed change gears ( div. ) ︱Chip conveyor
          Cam-controlled 6-spindle automatic lathe with 50 mm spindle passage and 3 m bar feeder with stand, 5 lateral work slides, 6 tool stands for the main slide, 2 tool holders for cross and top slides, 1 parting tool holder. The age of production is estimated. The machine is being sold due to a change in production. Machine dealer with own stock of 2500 m².
            number of spindles 6
            spindle passage 50 mm
            turning length 178 mm
            max. material feeding 254 mm
            speeds 2x17: 117 - 1460 U/min
            pre-settable workpiece times 4,9 - 394 sec
            switching time 2,9 sec
            boring of tool-holders 50,8 mm
            main drive motor 22 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 6 x 1,5 x 2,3 m
            Description :
            Cam-controlled 6-spindle automatic lathe with 50 mm spindle passage and 3 m bar
            feeder with stand, 5 lateral work slides, 6 tool stands for the main slide, 2
            tool holders for cross and top slides, 1 parting tool holder. The age of
            production is estimated. The machine is being sold due to a change in
            production.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact

          Center Lathe

          used  Center Lathe MEXPOL-AFM TUG 40 / Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12235 · Center Lathe

          MEXPOL-AFM - TUG 40 / Digi - - 1997 -

          Technical details
          turning diameter over bed 450 mm︱turning diameter over slide rest 260 mm︱turning length 1500 mm︱centre height 217 mm︱turning dia. in gap 650 mm︱turning speed range 14: 18 - 1600 U/min︱spindle bore 52 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1,9 t︱dimensions of the machine ca. 3,15 x 1,1 x 1,25 m︱Electric 380 Volt ︱3 jaw chuck Röhm 250 mm ︱2 axis digital readout Heidenhain ︱Multifix-steel holder ︱Cooling equipment ︱Rear chip protect ︱CE signed ︱Video available on our website.
          lathe with turning diameter 450 mm x turning length 1500 mm from one maintenance workshop. The year of construction is estimated! Machine dealer with own stock of 2500 m².
            turning diameter over bed 450 mm
            turning diameter over slide rest 260 mm
            turning length 1500 mm
            centre height 217 mm
            turning dia. in gap 650 mm
            turning speed range 14: 18 - 1600 U/min
            spindle bore 52 mm
            total power requirement 5,5 kW
            weight of the machine ca. 1,9 t
            dimensions of the machine ca. 3,15 x 1,1 x 1,25 m
            3 jaw chuck Röhm 250 mm
            2 axis digital readout Heidenhain
            Description :
            lathe with turning diameter 450 mm x turning length 1500 mm from one
            maintenance workshop. The year of construction is estimated!
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Center Lathe HARRISON M 300


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12237 · Center Lathe

          HARRISON - M 300 - - 1986 -

          Technical details
          turning diameter over bed 325 mm︱turning diameter over slide rest 210 mm︱turning length 700 mm︱spindle bore 38 mm︱spindle turning speed range 12: 40 - 2000 U/min︱bed width 210 mm︱centre height 165 mm︱total power requirement 2,2 kW︱weight of the machine ca. 800 kg︱dimensions of the machine ca. 1,6 x 1 x 1,1 m︱Electric 380 Volt ︱3 jaw chuck Forkardt 160 mm ︱Multifix-steel holder ︱Rear chip protect ︱Turret stop ︱Foot brake ︱Machinefeets ︱Coolant tank ︱Video available on our website.
          lathe make Harrison with turning diameter 325 mm, turning length 700 mm. Machine dealer with own stock of 2500 m².
            turning diameter over bed 325 mm
            turning diameter over slide rest 210 mm
            turning length 700 mm
            spindle bore 38 mm
            spindle turning speed range 12: 40 - 2000 U/min
            bed width 210 mm
            centre height 165 mm
            total power requirement 2,2 kW
            weight of the machine ca. 800 kg
            dimensions of the machine ca. 1,6 x 1 x 1,1 m
            3 jaw chuck Forkardt 160 mm
            Description :
            lathe make Harrison with turning diameter 325 mm, turning length 700 mm.
            Machine dealer with own stock of 2500 m².

          Datasheet
          Request / Contact
          used  Center Lathe RAVENSBURG K 45 / Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11996 · Center Lathe

          RAVENSBURG - K 45 / Digi - - 1973 -

          Technical details
          turning diameter over bed 1200 mm︱turning diameter over slide rest 850 mm︱turning length 2600 mm︱centre height 635 mm︱spindle bore 80 mm︱turning speed range: 36: 8 - 480 U/min.︱max. workpiece weight -without tailstock 1000 kg︱max. workpiece weight between centres 4000 kg︱feed steps 18 ︱feeds: bed slide/longitudinal 0,04 - 2 mm/U︱feeds: face and top slide 0,04 - 2 mm/U︱adjustment on bed slide 500 mm︱adjustment of upper support 100 mm︱tailstock - quill diameter 140 mm︱taper in tailstock MT 6 ︱drive capacity - spindle motor 22 kW︱total power requirement 28 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 5,8 x 1,5 x 2 m︱Electric 380 Volt
          German branded product - top quality. Machine with a second upper support, 4- axis digital display with X, Z, Z1 + W display, self-gear in the longitudinal top support, transverse top support manually, all other movements can be switched electrically, two rapid traverses at different speeds. Machine dealer with own stock of 2500 m².
            turning diameter over bed 1200 mm
            turning diameter over slide rest 850 mm
            turning length 2600 mm
            centre height 635 mm
            spindle bore 80 mm
            turning speed range: 36: 8 - 480 U/min.
            max. workpiece weight -without t. 1000 kg
            max. workpiece weight between ce. 4000 kg
            feed steps 18
            feeds: bed slide/longitudinal 0,04 - 2 mm/U
            feeds: face and top slide 0,04 - 2 mm/U
            adjustment on bed slide 500 mm
            adjustment of upper support 100 mm
            tailstock - quill diameter 140 mm
            taper in tailstock MT 6
            drive capacity - spindle motor 22 kW
            total power requirement 28 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 5,8 x 1,5 x 2 m
            Description :
            German branded product - top quality. Machine with a second upper support, 4-
            axis digital display with X, Z, Z1 + W display, self-gear in the longitudinal
            top support, transverse top support manually, all other movements can be
            switched electrically, two rapid traverses at different speeds.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Center Lathe WOHLENBERG V 1000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11703 · Center Lathe

          WOHLENBERG - V 1000 - - 1967 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 760 mm︱turning length 5100 mm︱centre height 500 mm︱face slide travel 480 mm︱upper slide travel 250 mm︱spindle bore 82 mm︱spindle head DIN 55022 Gr. 11 ︱spindle turning speed range 3,55 - 710 U/min︱feeds - longitudinal 0,063 - 140 mm/U︱feeds - cross 0,032 - 71 mm/U︱rapid travel - longitudinal/face 4,2 / 2,1 m/min︱thread - mm pitch 0,25 - 560 mm︱thread - module 0,063 - 140 ︱thread - inch 112 - 1/20 Gg/"︱max. workpiece weight between centres 4000 kg︱tailstock quill diameter 140 mm︱tailstock quill stroke 315 mm︱taper in tailstock MT 6 ︱total power requirement 22 Kw︱
          Guideways in exellent condition Machine dealer with own stock of 2500 m².
            turning diameter over bed 1000 mm
            turning diameter over slide rest 760 mm
            turning length 5100 mm
            centre height 500 mm
            face slide travel 480 mm
            upper slide travel 250 mm
            spindle bore 82 mm
            spindle head DIN 55022 Gr. 11
            spindle turning speed range 3,55 - 710 U/min
            feeds - longitudinal 0,063 - 140 mm/U
            feeds - cross 0,032 - 71 mm/U
            rapid travel - longitudinal/face 4,2 / 2,1 m/min
            thread - mm pitch 0,25 - 560 mm
            thread - module 0,063 - 140
            thread - inch 112 - 1/20 Gg/"
            max. workpiece weight between ce. 4000 kg
            tailstock quill diameter 140 mm
            tailstock quill stroke 315 mm
            taper in tailstock MT 6
            total power requirement 22 Kw
            Description :
            Guideways in exellent condition
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Center Lathe NARDINI MS 175 E / 800


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12236 · Center Lathe

          NARDINI - MS 175 E / 800 - - -

          Technical details
          turning diameter over bed 350 mm︱turning diameter over slide rest 200 mm︱turning length 800 mm︱spindle bore 46 mm︱spindle turning speed range 18: 25 - 2000 U/min︱total power requirement 4,4/2,2 kW︱weight of the machine ca. 800 kg︱dimensions of the machine ca. 2 x 1 x 1,8 m︱Electric 380 Volt ︱3 jaw chuck neu 160 mm︱Multifix-toolholder with tapers ︱Rear chip protect ︱Faceplate Röhm 310 mm︱Motor brake ︱Video available on our website.
          practical lathe from a training workshop. Machine dealer with own stock of 2500 m².
            turning diameter over bed 350 mm
            turning diameter over slide rest 200 mm
            turning length 800 mm
            spindle bore 46 mm
            spindle turning speed range 18: 25 - 2000 U/min
            total power requirement 4,4/2,2 kW
            weight of the machine ca. 800 kg
            dimensions of the machine ca. 2 x 1 x 1,8 m
            3 jaw chuck neu 160 mm
            Faceplate Röhm 310 mm
            Description :
            practical lathe from a training workshop.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Center Lathe WEILER MATADOR


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12199 · Center Lathe

          WEILER - MATADOR - - -

          Technical details
          turning diameter over bed 295 mm︱turning diameter over slide rest 160 mm︱turning length 500 mm︱spindle bore 36 mm︱tool adaptor DIN 55022 / Gr. 5 ︱turning speeds 18: 30 - 3550 U/min︱Drive 2,2 kW︱weight of the machine ca. 620 kg︱dimensions of the machine ca. 1,4 x 0,7 x 1,2 m︱Electric 380 Volt ︱chuck Röhm 160 mm︱Rapid transfer steel-holder Ideal ︱Applications for rapid transfer steel-holder 5 ︱Tool cupboard ︱Tailstock nicht vorhanden / No ︱Steady ︱Video available on our website.
          Unfortunately the tailstock is missing so we made a reduced price. A tailstock of a dividing head is available (photo 7), it has MK 2 and approx. 55 mm stroke, adjustable with a knurled screw. This would have to be brought to the appropriate center height by the purchaser with an adapter plate. Machine dealer with own stock of 2500 m².
            turning diameter over bed 295 mm
            turning diameter over slide rest 160 mm
            turning length 500 mm
            spindle bore 36 mm
            tool adaptor DIN 55022 / Gr. 5
            turning speeds 18: 30 - 3550 U/min
            Drive 2,2 kW
            weight of the machine ca. 620 kg
            dimensions of the machine ca. 1,4 x 0,7 x 1,2 m
            chuck Röhm 160 mm
            Rapid transfer steel-holder Ideal
            Applications for rapid transfer . 5
            Tailstock nicht vorhanden / No
            Description :
            Unfortunately the tailstock is missing so we made a reduced price. A tailstock
            of a dividing head is available (photo 7), it has MK 2 and approx. 55 mm
            stroke, adjustable with a knurled screw. This would have to be brought to the
            appropriate center height by the purchaser with an adapter plate.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Center Lathe MVE BAUART VDF MVE 280/wie VDF V5-2000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-10914 · Center Lathe

          MVE BAUART VDF - MVE 280/wie VDF V5-2000 - - -

          Technical details
          turning diameter over bed 590 mm︱turning diameter over slide rest 380,350 mm︱turning length 2000 mm︱centre height 280 mm︱bed width 490 mm︱spindle bore 81 mm︱spindle turning speed range 18, von 19-950 U/min︱total power requirement 11 kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 4,51 x 1,76 x 1,58 m︱Electric 380 Volt ︱3-jaw chuck Forkardt F 315 ︱Rapid transfer-steel holder with div. applications ︱Machinelight ︱Cooling equipment ︱Machinefeets ( 6 pieces ) ︱Following peak ︱Condition: ready for operation ︱Video available on our website.
          Universal lathe. Please notice that the MVE 280 is like the VDF V 5 x 2000. Guideways and spindles in good condition. Machine dealer with own stock of 2500 m².
            turning diameter over bed 590 mm
            turning diameter over slide rest 380,350 mm
            turning length 2000 mm
            centre height 280 mm
            bed width 490 mm
            spindle bore 81 mm
            spindle turning speed range 18, von 19-950 U/min
            total power requirement 11 kW
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 4,51 x 1,76 x 1,58 m
            Description :
            Universal lathe. Please notice that the MVE 280 is like the VDF V 5 x 2000.
            Guideways and spindles in good condition.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled GILDEMEISTER NEF PLUS 500


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12256 · Lathe - cycle-controlled

          GILDEMEISTER - NEF PLUS 500 - - 1996 - MANUAL PLUS

          Technical details
          turning diameter 500 mm︱turning length 1500 mm︱control MANUAL PLUS ︱turning diameter over slide 290 mm︱cross movement 260 mm︱spindle turning speed - gearbox stage 1 80 - 250 1/min.︱spindle turning speed - gearbox stage 2 20 - 710 1/min.︱spindle turning speed - gearbox stage 3 80 - 2800 1/min.︱spindle motor 11 kW︱ max. 1050 Nm︱spindle head DIN 55027 - Size 8 ︱spindle bore 70 mm︱feed 5 m/min︱rapid travel - longitudinal/face 8 / 6 m/min︱tool holder Parat ︱tailstock quill diameter 80 mm︱tailstock travel 180 mm︱tailstock quill taper MT 5 ︱Dimensions of machine 3,5 x 1,85 x 1,85 m︱weight 3,1 t︱
          CNC 2-axis cycle control HEIDENHAIN - Manual Plus with graphic supported conversational programming. MACHINE ONLY RUN 8060 HOURS BECAUSE WORKED IN REPAIR DEPARTMENT! Machine under power in customers factory. Machine dealer with own stock of 2500 m².
            turning diameter 500 mm
            turning length 1500 mm
            control MANUAL PLUS
            turning diameter over slide 290 mm
            cross movement 260 mm
            spindle turning speed - gearbox . 80 - 250 1/min.
            spindle turning speed - gearbox . 20 - 710 1/min.
            spindle turning speed - gearbox . 80 - 2800 1/min.
            spindle motor 11 kW
            max. 1050 Nm
            spindle head DIN 55027 - Size 8
            spindle bore 70 mm
            feed 5 m/min
            rapid travel - longitudinal/face 8 / 6 m/min
            tool holder Parat
            tailstock quill diameter 80 mm
            tailstock travel 180 mm
            tailstock quill taper MT 5
            Dimensions of machine 3,5 x 1,85 x 1,85 m
            weight 3,1 t
            Description :
            CNC 2-axis cycle control HEIDENHAIN - Manual Plus with graphic
            supported conversational programming.
            MACHINE ONLY RUN 8060 HOURS BECAUSE WORKED IN REPAIR DEPARTMENT!
            Machine under power in customers factory.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine FLOTT TB 15 GL / Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11891 · Bench Drilling Machine

          FLOTT - TB 15 GL / Digi - - 1990 -

          Technical details
          bore capacity in steel (diameter) 16 mm︱throat 200 mm︱bore stroke 80 mm︱speeds 6 / 160 - 1600 U/min︱spindle taper MK 2 ︱column diameter 70 mm︱table-size 280 x 200 mm︱total power requirement 0,55 kW︱weight of the machine ca. 140 kg︱dimensions of the machine ca. 0,32 x 0,68 x 1,56 m︱Digital readout Hub der Spindel ︱Speed change via V-belt disc ︱Condition: ready for operation
          Electric drill on stand with digital display for the spindle stroke. The machine was originally a drilling and tapping machine. The thread cycle has been removed. Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 16 mm
            throat 200 mm
            bore stroke 80 mm
            speeds 6 / 160 - 1600 U/min
            spindle taper MK 2
            column diameter 70 mm
            table-size 280 x 200 mm
            total power requirement 0,55 kW
            weight of the machine ca. 140 kg
            dimensions of the machine ca. 0,32 x 0,68 x 1,56 m
            Digital readout Hub der Spindel
            Description :
            Electric drill on stand with digital display for the spindle stroke.
            The machine was originally a drilling and tapping machine.
            The thread cycle has been removed.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine GILLARDON GB 32 VE


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08662 · Pillar Drilling Machine

          GILLARDON - GB 32 VE - - neu -

          Technical details
          bore capacity in steel (diameter) 32 mm︱throat 310 mm︱bore stroke 175 mm︱short taper MK 4 ︱feeds 0,1+0,2+0,3+0,4 mm/U︱table-size 570 x 475 mm︱spindle turning speed - stepless 60 - 1600 U/min︱column diameter 130 mm︱distance between table/spindle max. 790 mm︱threading ST 60/GG 20 max. M 27 / M 36 ︱drilling capacity steel/cast iron 40 mm︱distance spindle/base plate 1210 mm︱total power requirement 1,1/1,8 kW︱weight of the machine ca. 450 kg︱range L-W-H 960 x 650 x 1950 mm︱Electric 400 Volt ︱Thread cutting device ︱Stepless turning speed regulation ︱electromagnetic feed ︱Cooling pump in machine base
          Pillar drill with stepless speed control, 2-stage motor, autom. Spindle feed, electromagnetic feed engagement, tapping device, tachometer, prepared for coolant device. Gillardon = German branded product. Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 32 mm
            throat 310 mm
            bore stroke 175 mm
            short taper MK 4
            feeds 0,1+0,2+0,3+0,4 mm/U
            table-size 570 x 475 mm
            spindle turning speed - stepless 60 - 1600 U/min
            column diameter 130 mm
            distance between table/spindle max. 790 mm
            threading ST 60/GG 20 max. M 27 / M 36
            drilling capacity steel/cast iro. 40 mm
            distance spindle/base plate 1210 mm
            total power requirement 1,1/1,8 kW
            weight of the machine ca. 450 kg
            range L-W-H 960 x 650 x 1950 mm
            Description :
            Pillar drill with stepless speed control, 2-stage motor, autom. Spindle feed,
            electromagnetic feed engagement, tapping device, tachometer, prepared for
            coolant device. Gillardon = German branded product.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine GILLARDON GB 28 VE


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08660 · Pillar Drilling Machine

          GILLARDON - GB 28 VE - - neu -

          Technical details
          bore capacity in steel (diameter) 28 mm︱throat 295 mm︱bore stroke 175 mm︱short taper MK 3 ︱feeds 0,1+0,2+0,3+0,4 mm/U︱table-size 510 x 425 mm︱spindle turning speed - stepless 60 - 1600 U/min︱column diameter 115 mm︱distance between table/spindle max. 850 mm︱threading ST 60/GG 20 max. M 20 / M 24 ︱drilling capacity steel/cast iron 32 mm︱distance spindle/base plate 1320 mm︱total power requirement 0,7/1,3 kW︱weight of the machine ca. 410 kg︱range L-W-H 960 x 650 x 1950 mm︱Electric 400 Volt ︱Thread cutting device ︱Stepless turning speed regulation ︱Colling unit with separate container ︱electromagnetic feed
          Pillar drill with stepless speed control, 2-stage motor, autom. Spindle feed, electromagnetic feed engagement, tapping device, tachometer, prepared for coolant device. Gillardon = German branded product. Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 28 mm
            throat 295 mm
            bore stroke 175 mm
            short taper MK 3
            feeds 0,1+0,2+0,3+0,4 mm/U
            table-size 510 x 425 mm
            spindle turning speed - stepless 60 - 1600 U/min
            column diameter 115 mm
            distance between table/spindle max. 850 mm
            threading ST 60/GG 20 max. M 20 / M 24
            drilling capacity steel/cast iro. 32 mm
            distance spindle/base plate 1320 mm
            total power requirement 0,7/1,3 kW
            weight of the machine ca. 410 kg
            range L-W-H 960 x 650 x 1950 mm
            Description :
            Pillar drill with stepless speed control, 2-stage motor, autom. Spindle feed,
            electromagnetic feed engagement, tapping device, tachometer, prepared for
            coolant device. Gillardon = German branded product.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine KAPEMA BM 25


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08400 · Pillar Drilling Machine

          KAPEMA - BM 25 - - fabrikneu / new -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 255 mm︱bore stroke 135 mm︱spindle turning speed range 8, von 105-2900 U/min︱table-size 500 x 350 mm︱column diameter 100 mm︱spindle taper MK 3 ︱total power requirement 0,65 / 0,9 kW︱weight of the machine ca. 190 kg︱dimensions of the machine ca. 0,5 x 0,5 x 1,7 m︱Electric 380 Volt ︱Drill chuck ︱Condition: unused
          Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 25 mm
            throat 255 mm
            bore stroke 135 mm
            spindle turning speed range 8, von 105-2900 U/min
            table-size 500 x 350 mm
            column diameter 100 mm
            spindle taper MK 3
            total power requirement 0,65 / 0,9 kW
            weight of the machine ca. 190 kg
            dimensions of the machine ca. 0,5 x 0,5 x 1,7 m
            Description :
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine HUVEMA HU 050 A


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12243 · Pillar Drilling Machine

          HUVEMA - HU 050 A - - 2002 -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 360 mm︱bore stroke 230 mm︱spindle turning speed range 9: 54 - 1032 U/min︱spindle taper MK 4 ︱table-size 520 x 620 mm︱thread capacity M 42 ︱column diameter 200 mm︱distance spindle /table 142 - 773 mm︱feeds: 4: 0,1 - 0,4 mm/U.︱Drive 3,5 kW︱weight of the machine ca. 860 kg︱dimensions of the machine ca. 1,04 x 0,57 x 2,47 m︱Electric 380 Volt ︱Plexiglass protection in front ︱Vice ︱Cooling equipment ︱Machinelight ︱CE signed ︱Video available on our website.
          Heavy gear drill 50 mm drilling capacity, MK 4, right-left rotation, table adjustment via toothed rack, drilling depth stop, table can be rotated. Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 50 mm
            throat 360 mm
            bore stroke 230 mm
            spindle turning speed range 9: 54 - 1032 U/min
            spindle taper MK 4
            table-size 520 x 620 mm
            thread capacity M 42
            column diameter 200 mm
            distance spindle /table 142 - 773 mm
            feeds: 4: 0,1 - 0,4 mm/U.
            Drive 3,5 kW
            weight of the machine ca. 860 kg
            dimensions of the machine ca. 1,04 x 0,57 x 2,47 m
            Description :
            Heavy gear drill 50 mm drilling capacity, MK 4, right-left rotation,
            table adjustment via toothed rack, drilling depth stop, table can be rotated.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine AUDAX 50 A


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11686 · Pillar Drilling Machine

          AUDAX - 50 A - - 1970 -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 300 mm︱bore stroke 200 mm︱spindle taper MK 4 ︱spindle turning speed range 55 - 600 U/min︱table diameter 500 mm︱column diameter 180 mm︱feeds 0,07/0,11/0,16/0,22 mm/U︱total power requirement 1,47 / 1,84 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 1,3 x 0,65 x 2,17 m︱Electric 380 Volt ︱Condition: ready for operation
          Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 50 mm
            throat 300 mm
            bore stroke 200 mm
            spindle taper MK 4
            spindle turning speed range 55 - 600 U/min
            table diameter 500 mm
            column diameter 180 mm
            feeds 0,07/0,11/0,16/0,22 mm/U
            total power requirement 1,47 / 1,84 kW
            weight of the machine ca. 500 kg
            dimensions of the machine ca. 1,3 x 0,65 x 2,17 m
            Description :
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact

          Radial Drilling Machine

          used  Radial Drilling Machine Kami / RDM BKM 6035


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12244 · Radial Drilling Machine

          Kami / RDM - BKM 6035 - - 2008 -

          Technical details
          bore capacity in steel (diameter) 32 mm︱arm length 820 mm︱tool taper MK 4 ︱pivoting angle +/- 180 Grad︱stroke 250 mm︱turning speeds 75 - 1220 U/min︱feed 3: 0,1/0,16/,025 mm/U︱column diameter 200 mm︱surface area 825 x 690 mm︱total power requirement 2,25 kW︱weight of the machine ca. 1,2 t︱range L-W-H 1,5 x 0,75 x 2,2 m︱Electric 380 Volt ︱Cube bore table ︱Machinelight ︱Cooling equipment ︱CE signed ︱Video available on our website.
          Radial drilling machine with electr. Boom height adjustment, manual Clamping of the column and the drill head as well as right-left rotation. Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 32 mm
            arm length 820 mm
            tool taper MK 4
            pivoting angle +/- 180 Grad
            stroke 250 mm
            turning speeds 75 - 1220 U/min
            feed 3: 0,1/0,16/,025 mm/U
            column diameter 200 mm
            surface area 825 x 690 mm
            total power requirement 2,25 kW
            weight of the machine ca. 1,2 t
            range L-W-H 1,5 x 0,75 x 2,2 m
            Description :
            Radial drilling machine with electr. Boom height adjustment, manual
            Clamping of the column and the drill head as well as right-left rotation.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact

          Rapid Radial Drilling Machine

          used  Rapid Radial Drilling Machine GILLARDON GSR 32 VE-SL


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08664 · Rapid Radial Drilling Machine

          GILLARDON - GSR 32 VE-SL - - neu -

          Technical details
          bore capacity in steel (diameter) 32 mm︱arm length 1220 mm︱workpiece height max. 600 mm︱bore capacity in cast iron 40 mm︱short taper MK 4 ︱throat min. 210 mm︱table surface area 1200 x 510 mm︱distance spindle /table 380 - 680 mm︱distance spindle/base plate 1075- 1375 mm mm︱quill stroke 200 mm︱spindle feeds: 0,08-0,1-0,2-0,3 ︱spindle turning speed - stepless 80 - 2000 U/min︱dimensions 1,2 x 1,71 x 2,5 m︱total power requirement 2/2,4 kW︱weight of the machine ca. 1,7 t︱Electric 400 Volt ︱Thread cutting device ︱Stepless turning speed regulation ︱Protection guard plexi ︱Electromagnetic feed engagement
            bore capacity in steel (diameter. 32 mm
            arm length 1220 mm
            workpiece height max. 600 mm
            bore capacity in cast iron 40 mm
            short taper MK 4
            throat min. 210 mm
            table surface area 1200 x 510 mm
            distance spindle /table 380 - 680 mm
            distance spindle/base plate 1075- 1375 mm mm
            quill stroke 200 mm
            spindle feeds: 0,08-0,1-0,2-0,3
            spindle turning speed - stepless 80 - 2000 U/min
            dimensions 1,2 x 1,71 x 2,5 m
            total power requirement 2/2,4 kW
            weight of the machine ca. 1,7 t
          Datasheet
          Request / Contact
          used  Rapid Radial Drilling Machine DONAU Danuflex 135 x/y Pos. Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12120 · Rapid Radial Drilling Machine

          DONAU - Danuflex 135 x/y Pos. Digi - - 2007 -

          Technical details
          bore capacity in steel (diameter) 35 mm︱arm length 1050 mm︱workpiece height max. 450 mm︱driling depth/spindle stroke 165 mm︱thread capacity M30 ︱spindle taper MK 4 ︱crossrail adjustment horizontal 750 mm︱pivoting angle 330 Grad︱distance spindle nose and table 50 - 665 mm︱feeds 0,02 - 0,7 mm/U︱spindle turning speed range 20 - 3200 U/min︱working height table 900 mm︱Table dimensions 1200 x 600 mm︱table surface area 1050 x 500 mm︱total power requirement 4 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2,8 x 1,8 x 2,36 m︱Electric 400 Volt ︱Thread cutting device ︱Central lubrication manuell
          Rapid radial drilling machine with the following special accessories: Graphic drilling display with X, Y position display integrated in the drilling head of the machine (2 axes). After entering the data of the drilling pattern, the first point can be approached manually via the two positioning displays and drilling can be made. The OK key then takes you to the next drilling coordinate, which in turn has to be approached, etc. • Display switchable between machine (radius, angle) and Workpiece coordination • Entry of drilling coordination (X, Y) with graphic support (bolt circle, ...). Distance-to-go display in machine coordination, • Display switchable between distance to go and absolute position • Zero the X or Y display in any position by pressing a key • Entry of a zero point offset without changing the axis orientation • Edge key connection • Computational alignment to existing holes • Zeroing the X or Y display by probing workpiece edges • Zeroing the X and Y display when determining a hole center • Pitch circle calculator • Storage of up to 50 drilling pattern programs (max. 1000 lines) • via teach-in • Printout of programs and actual positions • Serial interface V 24 / RS 232 C • Mechanical button [electronic button see. Pos. 3.60] • Separate clamping of boom and column. Automatic clamping in the position window for quick determination of the position of the machining position on the machine. Swivel table: Can be swiveled by +/- 90 °, clamping surface 600 x 400 mm, with 3 T-slots 18 mm, distance 125 mm with hand crank adjustable via worm drive, max. Load: 150 kg Attachment to the clamping surfaces in the T-slots, on the side or on the back of the machine. Coolant device version A integrated in the machine base for machines without considering a base plate consisting of: Coolant tank with a capacity of 35 l, Coolant pump, compl. Fitting Flow rate approx. 40 l / min at 0.4 bar. Electronic edge finder. Tool drawer in the table base. Please notice that the price of this machine new is now € 76000,--. Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 35 mm
            arm length 1050 mm
            workpiece height max. 450 mm
            driling depth/spindle stroke 165 mm
            thread capacity M30
            spindle taper MK 4
            crossrail adjustment horizontal 750 mm
            pivoting angle 330 Grad
            distance spindle nose and table 50 - 665 mm
            feeds 0,02 - 0,7 mm/U
            spindle turning speed range 20 - 3200 U/min
            working height table 900 mm
            Table dimensions 1200 x 600 mm
            table surface area 1050 x 500 mm
            total power requirement 4 kW
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2,8 x 1,8 x 2,36 m
            Central lubrication manuell
            Description :
            Rapid radial drilling machine with the following special accessories:
            Graphic drilling display with X, Y position display integrated in the drilling
            head of the machine (2 axes). After entering the data of the drilling pattern,
            the first point can be approached manually via the two positioning displays and
            drilling can be made. The OK key then takes you to the next drilling
            coordinate, which in turn has to be approached, etc.
            • Display switchable between machine (radius, angle) and
            Workpiece coordination
            • Entry of drilling coordination (X, Y) with graphic support (bolt circle, ...).
            Distance-to-go display in machine coordination,
            • Display switchable between distance to go and absolute position
            • Zero the X or Y display in any position by pressing a key
            • Entry of a zero point offset without changing the axis orientation
            • Edge key connection
            • Computational alignment to existing holes
            • Zeroing the X or Y display by probing workpiece edges
            • Zeroing the X and Y display when determining a hole center
            • Pitch circle calculator
            • Storage of up to 50 drilling pattern programs (max. 1000 lines)
            • via teach-in
            • Printout of programs and actual positions
            • Serial interface V 24 / RS 232 C
            • Mechanical button [electronic button see. Pos. 3.60]
            • Separate clamping of boom and column.
            Automatic clamping in the position window for quick determination of the
            position of the machining position on the machine.
            Swivel table:
            Can be swiveled by +/- 90 °, clamping surface 600 x 400 mm,
            with 3 T-slots 18 mm, distance 125 mm with hand crank
            adjustable via worm drive, max. Load: 150 kg
            Attachment to the clamping surfaces in the T-slots, on the side or on the back
            of the machine.
            Coolant device version A integrated in the machine base for machines without
            considering a base plate consisting of:
            Coolant tank with a capacity of 35 l,
            Coolant pump, compl. Fitting
            Flow rate approx. 40 l / min at 0.4 bar. Electronic edge finder.
            Tool drawer in the table base.
            Please notice that the price of this machine new is now € 76000,--.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used  Rapid Radial Drilling Machine DONAU DR 23


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12162 · Rapid Radial Drilling Machine

          DONAU - DR 23 - - -

          Technical details
          bore capacity in steel (diameter) 23 mm︱arm length 920 mm︱workpiece height max. 550 mm︱bore capacity in cast iron 30 mm︱spindle taper MT 3 MK︱bore depth 130 mm︱turning speeds 12: 70 - 1550 U/min︱column diameter 150 mm︱table surface area 1200 x 500 mm︱feed range 0,075/0,15/0,3 mm/U︱threading cutting capacity: M 20 / Guss M 26 ︱bore spindle drive 1,1 / 1,6 kW︱stroke drive 1,5 kW︱weight of the machine ca. 1,38 t︱Overall size 1200 x 1700 x 1710/2160 mm︱Electric 380 Volt ︱Cooling equipment ︱Thread cutting device ︱Video available on our website.
          Machine dealer with own stock of 2500 m².
            bore capacity in steel (diameter. 23 mm
            arm length 920 mm
            workpiece height max. 550 mm
            bore capacity in cast iron 30 mm
            spindle taper MT 3 MK
            bore depth 130 mm
            turning speeds 12: 70 - 1550 U/min
            column diameter 150 mm
            table surface area 1200 x 500 mm
            feed range 0,075/0,15/0,3 mm/U
            threading cutting capacity: M 20 / Guss M 26
            bore spindle drive 1,1 / 1,6 kW
            stroke drive 1,5 kW
            weight of the machine ca. 1,38 t
            Overall size 1200 x 1700 x 1710/2160 mm
            Description :
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact

          Milling Machine - Vertical

          used  Milling Machine - Vertical WANDERER VF 20-2 / Grundig Manual Plus


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11586 · Milling Machine - Vertical

          WANDERER - VF 20-2 / Grundig Manual Plus - - 1982 / 1997 - Grundig Manual Plus

          Technical details
          x-travel 1010 mm︱y-travel 310 mm︱z-travel 440 mm︱table surface area 1600 x 450 mm︱speeds 28 - 2240 U/min︱control Grundig Manual Plus ︱spindle taper ISO 50 ︱spindle motor 20,5 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,5 x 2,3 x 2,4 m︱Electric 380 Volt ︱Cooling equipment ︱Div. receivings SK 50
          3-axes CNC path control MANUAL PLUS new in 1997. The machine has run until last, but the control cabinet with its many individual cables is now no longer connected. That is why we are selling with a special reduced price. Machine dealer with own stock of 2500 m².
            x-travel 1010 mm
            y-travel 310 mm
            z-travel 440 mm
            table surface area 1600 x 450 mm
            speeds 28 - 2240 U/min
            control Grundig Manual Plus
            spindle taper ISO 50
            spindle motor 20,5 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,5 x 2,3 x 2,4 m
            Div. receivings SK 50
            Description :
            3-axes CNC path control MANUAL PLUS new in 1997.
            The machine has run until last, but the control cabinet with its
            many individual cables is now no longer connected. That is why we are selling
            with a special reduced price.
            Machine dealer with own stock of 2500 m².
          4.800 €
          Datasheet
          Request / Contact

          milling machining centers - universal

          used  milling machining centers - universal WEMAS VZG 65-5A Generation II


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08651 · milling machining centers - universal

          WEMAS - VZG 65-5A Generation II - - Fabrikneu - Heidenhain TNC 640 HSCI

          Technical details
          x-travel 620 mm︱y-travel 520 mm︱z-travel 460 mm︱Control Heidenhain TNC 640 HSCI ︱surface area 650 mm︱table rotation 360 °︱tablemovement on both sides -50 / + 110 °︱table load 300 kg︱T-slots 5 x 18 H7 x 100 ︱distance spindle nose and table 180 - 640 mm︱c-axis 360 °︱B-axis (table) -50 / + 110 °︱turning speeds 20-12.000 (15.+18+24.000) U/min︱spindle motor 33 / 180 (17/108) kW / Nm︱rapid traverse x / y + z - axis 48 m/min︱b-axis 25 UpM︱c-axis 25 UpM︱numbers of tools in magazin 48 (60/120) ︱spindle taper SK 40 / BT 40 / HSK 63A ︱total connect load 35 kW︱
          New 5-axis machining center WEMAS VZG 65 - 5A Generation II for simultaneous milling and full 5-side machining, Heidenhain glass scales in x, y, z, directly Encoder Heidenhain in B, C. Main spindle AC - direct drive motor, digital axle drives, extensive standard equipment such as conveyor belt chip conveyor,elec. handwheel, control cabinet cooling, spindle cooling, z-axis temperature compensation, full protection cabin (without cab roof),coolant unit with cabin flushing / external coolant / IKZ 30 bar / hand rinse with additional gun, four guideways in the Y axis, data interfaces. As an alternative to the Heidenhain control, Siemens 840 D SL can also be offered. Many optional accessories available as different speed ratings of the main spindle, tool changer in various number of toolpositions, various internal cooling systems with multiple pressure outputs and filters, laser measuring system, blown air, oil mist suction, hydraulic clamp, instruction and training and much more.
            x-travel 620 mm
            y-travel 520 mm
            z-travel 460 mm
            Control Heidenhain TNC 640 HSCI
            surface area 650 mm
            table rotation 360 °
            tablemovement on both sides -50 / + 110 °
            table load 300 kg
            T-slots 5 x 18 H7 x 100
            distance spindle nose and table 180 - 640 mm
            c-axis 360 °
            B-axis (table) -50 / + 110 °
            turning speeds 20-12.000 (15.+18+24.000) U/min
            spindle motor 33 / 180 (17/108) kW / Nm
            rapid traverse x / y + z - axis 48 m/min
            b-axis 25 UpM
            c-axis 25 UpM
            numbers of tools in magazin 48 (60/120)
            spindle taper SK 40 / BT 40 / HSK 63A
            total connect load 35 kW
            Description :
            New 5-axis machining center WEMAS VZG 65 - 5A Generation II for simultaneous
            milling and full 5-side machining, Heidenhain glass scales in x, y, z, directly
            Encoder Heidenhain in B, C. Main spindle AC - direct drive motor, digital axle
            drives, extensive standard equipment such as conveyor belt chip conveyor,elec.
            handwheel, control cabinet cooling, spindle cooling, z-axis temperature
            compensation, full protection cabin (without cab roof),coolant unit with cabin
            flushing / external coolant / IKZ 30 bar / hand rinse with additional gun, four
            guideways in the Y axis, data interfaces.
            As an alternative to the Heidenhain control, Siemens 840 D SL can also be
            offered.
            Many optional accessories available as different speed ratings of the main
            spindle, tool changer in various number of toolpositions, various internal
            cooling systems with multiple pressure outputs and filters, laser measuring
            system, blown air, oil mist suction, hydraulic clamp, instruction and training
            and much more.
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical WEMAS VZ 1250 Quick


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08650 · milling machining centers - vertical

          WEMAS - VZ 1250 Quick - - fabrikneu - Heidenhain TNC 620

          Technical details
          x-travel 1250 mm︱y-travel 600 mm︱z-travel 650 mm︱control Heidenhain TNC 620 ︱table-size 1350 x 600 mm︱T-slots 5 x 18 x 100 ︱distance spindle nose and table 120 - 770 mm︱table load 1200 kg︱spindle cone ISO 40 ︱turning speeds 40-10.000 (12. + 15.000) U/min︱feeds x/y/z 1 - 24.000 mm/min.︱rapid travel x/y/z 24 / 24 / 24 m/min︱number of tools 30 (40/60) ︱spindle drive 15/32 (11/15) kW︱total power requirement 35 kW︱weight of the machine ca. 8,5 t︱dimensions of the machine ca. 3,2 x 2,27 x 2,47(2,89) m︱Electric 400 Volt ︱Chip conveyor Scharnierband- ︱Electronic Hand wheel
          New 3-axis machining center WEMAS VZ with extensive standard equipment such as hinged band chip conveyor, electr. handwheel, control cabinet cooling, spindle cooling, coolant system with cabin flushing / external coolant / internal cooling 30 bar / hand wash with additional gun, four guideways in the Y-axis, data interfaces. As an alternative to the Heidenhain control, Siemens 828 D Shop Mill can also be offered. A wide range of optional extras available, such as different main spindle rotational speeds, tool changers in different number of tool positions, y-axis travel extension, various cooling (internal) systems with several pressure ratings, laser measuring system, belt filter system, oil mist extraction, 4th / 5th axis dividers, hydraulic clamps, instruction and training and much more.
            x-travel 1250 mm
            y-travel 600 mm
            z-travel 650 mm
            control Heidenhain TNC 620
            table-size 1350 x 600 mm
            T-slots 5 x 18 x 100
            distance spindle nose and table 120 - 770 mm
            table load 1200 kg
            spindle cone ISO 40
            turning speeds 40-10.000 (12. + 15.000) U/min
            feeds x/y/z 1 - 24.000 mm/min.
            rapid travel x/y/z 24 / 24 / 24 m/min
            number of tools 30 (40/60)
            spindle drive 15/32 (11/15) kW
            total power requirement 35 kW
            weight of the machine ca. 8,5 t
            dimensions of the machine ca. 3,2 x 2,27 x 2,47(2,89) m
            Chip conveyor Scharnierband-
            Description :
            New 3-axis machining center WEMAS VZ with extensive standard equipment such as
            hinged band chip conveyor, electr. handwheel, control cabinet cooling, spindle
            cooling, coolant system with cabin flushing / external coolant / internal
            cooling 30 bar / hand wash with additional gun, four guideways in the Y-axis,
            data interfaces.
            As an alternative to the Heidenhain control, Siemens 828 D Shop Mill can also
            be offered.
            A wide range of optional extras available, such as different main spindle
            rotational speeds, tool changers in different number of tool positions,
            y-axis travel extension, various cooling (internal) systems with several
            pressure ratings, laser measuring system, belt filter system, oil mist
            extraction, 4th / 5th axis dividers, hydraulic clamps, instruction and
            training and much more.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Trader Profile:   Plum & Partner Werkzeugmaschinen GmbH

          Contact Trader



            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444">+49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de

          Profile of Trader




          Plum  &  Partner Werkzeugmaschinen GmbH   32257 - Bünde Winkelstraße 32 Deutschland
          Plum & Partner Werkzeugmaschinen GmbH

          Winkelstraße 32



          Contact Trader


            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de
            Contact person:
          Herr Andreas Plum +49 5223574444
          Herr Werner H. Kloske +49 5223574444

           




          Machine category


          · Abkantpresse - hydraulisch · Abkantwerkzeuge · Aufspannplatte · Aufspannwinkel · Ausdrehkopf · Bandsäge - horizontal · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohranlage · Bohrer · Bohrerschleifmaschine · Brennschneidmaschine · Doppelschleifbock · Dornrohrbiegemaschine · Drehmaschine - zyklengesteuert · Dreiwalzen - Blechbiegemaschine · Einständerpresse - Hydraulisch · Entgratmaschine · Flachschleifmaschine - Horizontal · Fräseinrichtung · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Frässtichel-Schleifmaschine · Futter · Gewindebohrmaschine - Vertikal · Gewindeschneidmaschine · Handhebel-Schere · Handspindelpresse · Hydraulikaggregat · Härteanlage - Induktion · Härteprüfer · Kaltkreissäge · Koordinatenschleifmaschine · Koordinatentisch · Leichtmetallkreissäge · Leit- und Zugspindeldrehmaschine · Lochstanze · Magnetspannplatte · Mehrspindel-Bohrkopf · Mehrspindelstangenautomat · Meßmittel · Nutenziehmaschine · Planscheibe · Planschleifmaschine · Portalfräsmaschine · Positionierer · Profilstahlschere - Kombiniert · Radialbohrmaschine · Reihenbohrmaschine · Richtplatte · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollengang · Scheuertrommel (Rollentrommel) · Schleifmaschinenzubehör · Schleifscheibe · Schnellradialbohrmaschine · Schraubstock · Schweißdrehtisch - rund · Schwenkbiegemaschine · Spanbrecher-Nutenschleifmaschine · Späneförderer · Stangenlademagazin · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tischbohrmaschine · Topfschleifmaschine · Universalschleifmaschine · Vierwalzen - Blechbiegemaschine · Werkstattpresse - hydraulisch · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugschleifmaschine - Universal · Werkzeugwechselwagen · Würfeltisch ·