European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          HESSE+CO Maschinenfabrik GesmbH Industriezentrum NÖ-Süd - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe DREHPOWER DP 400/1000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2042 · Center Lathe

          DREHPOWER - DP 400/1000 - - 2019 -

          Technical details
          200 mm︱ 1.000 mm︱ 52 mm︱ 1,5/2,4 kW︱ 218 mm︱ 400 mm︱ 1.800 mm︱ 800 mm︱ 1.650 mm︱ 850 kg︱
          3-axes digital read-out with bridge quick change toolpost with 4 inserts for square tools steady rest following rest 3-jaw chuck Ø 200 mm incl. one set of change chucks 4-jaw chuck Ø 200 mm face plate Ø 280 mm incl. adapter flange coolant equipment halogen working light foot brake and additional electric break lathe chuck protection operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH centre height: 200 mm turning length: 1.000 mm spindlebore: 52 mm revs: 55-2.000 (18) r.p.m. motor: 1,5/2,4 kW bed with: 218 mm swing over bed: 400 mm length: 1.800 mm width: 800 mm height: 1.650 mm weight: 850 kg
            200 mm
            1.000 mm
            52 mm
            1,5/2,4 kW
            218 mm
            400 mm
            1.800 mm
            800 mm
            1.650 mm
            850 kg
            Description :
            3-axes digital read-out
            with bridge
            quick change toolpost with 4 inserts for square tools
            steady rest
            following rest
            3-jaw chuck Ø 200 mm incl. one set of change chucks
            4-jaw chuck Ø 200 mm
            face plate Ø 280 mm incl. adapter flange
            coolant equipment
            halogen working light
            foot brake and additional electric break
            lathe chuck protection
            operator tools
            machine and equipment according to the CE-regulations
            user manual in GERMAN and ENGLISH

            centre height: 200 mm
            turning length: 1.000 mm
            spindlebore: 52 mm
            revs: 55-2.000 (18) r.p.m.
            motor: 1,5/2,4 kW
            bed with: 218 mm
            swing over bed: 400 mm
            length: 1.800 mm
            width: 800 mm
            height: 1.650 mm
            weight: 850 kg
          Datasheet
          Request / Contact
          used  Center Lathe TOS SUI 63-3000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-3482 · Center Lathe

          TOS - SUI 63-3000 - - 1992 -

          Technical details
          630 mm︱ 3.000 mm︱ 550 mm︱ 500 mm︱ 630 mm︱ 340 mm︱ 210 mm︱ 71 mm︱ 5.060 mm︱ 1.570 mm︱ 1.700 mm︱ 5.730 kg︱
          new 3-axis digital display for X, Y, Z quick change tool holder with 5 chisel holders 3-jaw chuck with interchangeable jaws rapid traverse in longitudinal and planar feed 2x standing Lynette 1x accompanying lynette change gears forage protection work light rolling grains centering cone in the middle div. HM turning tool bed stop user manual in GERMAN Doesn't complies with the current industrial safety regulation (AMVO & UVV) turning diameter: 630 mm distance between centers: 3,000 mm speeds: 11.2 - 1,800 rpm. motor: 15 kW (total 20.1 kVA) bed width: 550 mm jaw chuck Ø: 500 mm face plate Ø: 630 mm turning diameter over support: 340 mm tailstock taper: MK 6 Ø 110 mm travel of the tailstock quill: 210 mm feed lengthways: 0.060 - 1.550 mm / rev flat feed: 0.030 - 0.775 mm / rev spindle bore: 71 mm length: 5,060 mm width: 1,570 mm height: 1,700 mm weight: 5,730 kg
            630 mm
            3.000 mm
            550 mm
            500 mm
            630 mm
            340 mm
            210 mm
            71 mm
            5.060 mm
            1.570 mm
            1.700 mm
            5.730 kg
            Description :
            new 3-axis digital display for X, Y, Z
            quick change tool holder with 5 chisel holders
            3-jaw chuck with interchangeable jaws
            rapid traverse in longitudinal and planar feed
            2x standing Lynette
            1x accompanying lynette
            change gears
            forage protection
            work light
            rolling grains
            centering cone in the middle
            div. HM turning tool
            bed stop
            user manual in GERMAN

            Doesn't complies with the current industrial safety regulation (AMVO & UVV)

            turning diameter: 630 mm
            distance between centers: 3,000 mm
            speeds: 11.2 - 1,800 rpm.
            motor: 15 kW (total 20.1 kVA)
            bed width: 550 mm
            jaw chuck Ø: 500 mm
            face plate Ø: 630 mm
            turning diameter over support: 340 mm
            tailstock taper: MK 6 Ø 110 mm
            travel of the tailstock quill: 210 mm
            feed lengthways: 0.060 - 1.550 mm / rev
            flat feed: 0.030 - 0.775 mm / rev
            spindle bore: 71 mm
            length: 5,060 mm
            width: 1,570 mm
            height: 1,700 mm
            weight: 5,730 kg
          Datasheet
          Request / Contact
          used  Center Lathe VOEST DA 260/71


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-3382 · Center Lathe

          VOEST - DA 260/71 - - 1977 -

          Technical details
          535 mm︱ 1.000 mm︱ 71 mm︱ 250 mm︱ 250 mm︱ 360 mm︱ 65 x 160 Ø mm︱ 7,5 kW︱ 2.300 mm︱ 1.100 mm︱ 1.400 mm︱ 1.500 kg︱
          without bridge 4-fold steel holder with 3 inserts chip bulkhead user manual in GERMAN Doesn't complies with the current industrial safety regulation (AMVO & UVV) turning diameter: 535 mm distance between centers: 1.000mm speeds: 21 - 1.500 rpm (18) spindle bore: 71 mm 3 jaw chucks: 250 mm tip height: 250 mm turn Ø over support: 360 mm tailstock quill: Ø 65 x 160 mm motor: 7,5 kW length: 2.300 mm width: 1.100 mm height: 1.400 mm weight: 1.500 kg
            535 mm
            1.000 mm
            71 mm
            250 mm
            250 mm
            360 mm
            65 x 160 Ø mm
            7,5 kW
            2.300 mm
            1.100 mm
            1.400 mm
            1.500 kg
            Description :
            without bridge
            4-fold steel holder with 3 inserts
            chip bulkhead
            user manual in GERMAN

            Doesn't complies with the current industrial safety regulation (AMVO & UVV)

            turning diameter: 535 mm
            distance between centers: 1.000mm
            speeds: 21 - 1.500 rpm (18)
            spindle bore: 71 mm
            3 jaw chucks: 250 mm
            tip height: 250 mm
            turn Ø over support: 360 mm
            tailstock quill: Ø 65 x 160 mm
            motor: 7,5 kW
            length: 2.300 mm
            width: 1.100 mm
            height: 1.400 mm
            weight: 1.500 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1250 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2365 · Center Lathe

          ZMM - CU 1250 RD - - -

          Technical details
          625 mm︱ 1.320 mm︱ 940 mm︱ 1.500 mm︱ 700 mm︱ 1.500 mm︱ . 15 Nr︱ 155 mm︱ 160 M︱ 30 kW︱ 685 mm︱ 270 mm︱ 125 mm︱ 6 MK︱ 260 mm︱ 8.550 kg︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.500 mm € 82.910,- turning length 3.000 mm € 88.960,- turning length 4.000 mm € 99.660,- turning length 5.000 mm € 104.930,- entre height: 625 mm swing over bed: 1.320 mm swing over cross slide: 940 mm swing in gap: 1.500 mm width of bed: 700 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 15 spindlebore: 155 mm spindle taper: M 160 spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6; 14,7 - 62; 58 - 250; 235 - 1.000 rpm main motor power: 30 kW number of feeds: 160 longitudinal feed range: 0,032 - 38,9 mm/r cross feed range: 0,016 - 19,45 mm/r number of threads: metric thread range (80): 0,5 - 480 mm inch thread rangel (80): 60 - 1/16 Tpi module thread range (80): 0,125 - 120 DP thread range (80): 240 - 1/4 cross slide travel: 525 mm top slide travel: 270 mm tailstock quill diameter: 125 mm tailstock quill taper: MK 6 tailstock travel: 260 mm weight approx.: 8.550 kg
            625 mm
            1.320 mm
            940 mm
            1.500 mm
            700 mm
            1.500 mm
            . 15 Nr
            155 mm
            160 M
            30 kW
            685 mm
            270 mm
            125 mm
            6 MK
            260 mm
            8.550 kg
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"
            (sample photo)
            Further turning lengths:


            turning length 1.500 mm € 82.910,- turning length 3.000 mm € 88.960,- turning length 4.000 mm € 99.660,- turning length 5.000 mm € 104.930,-



            entre height: 625 mm
            swing over bed: 1.320 mm
            swing over cross slide: 940 mm
            swing in gap: 1.500 mm
            width of bed: 700 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 15
            spindlebore: 155 mm
            spindle taper: M 160
            spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6; 14,7 - 62; 58 - 250; 235 - 1.000 rpm
            main motor power: 30 kW
            number of feeds: 160
            longitudinal feed range: 0,032 - 38,9 mm/r
            cross feed range: 0,016 - 19,45 mm/r
            number of threads:
            metric thread range (80): 0,5 - 480 mm
            inch thread rangel (80): 60 - 1/16 Tpi
            module thread range (80): 0,125 - 120
            DP thread range (80): 240 - 1/4
            cross slide travel: 525 mm
            top slide travel: 270 mm
            tailstock quill diameter: 125 mm
            tailstock quill taper: MK 6
            tailstock travel: 260 mm
            weight approx.: 8.550 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1000 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2363 · Center Lathe

          ZMM - CU 1000 RD - - -

          Technical details
          500 mm︱ 1.090 mm︱ 690 mm︱ 1.250 mm︱ 700 mm︱ 1.500 mm︱ . 15 Nr︱ 155 mm︱ 160 M︱ 30 kW︱ 525 mm︱ 270 mm︱ 125 mm︱ 6 MK︱ 260 mm︱ 8.050 kg︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.500 mm  € 78.250,- turning length 3.000 mm  € 84.600,- turning length 4.000 mm  € 95.200,- turning length 6.000 mm  € 118.090,- entre height: 500 mm swing over bed: 1.090 mm swing over cross slide: 690 mm swing in gap: 1.250 mm width of bed: 700 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 15 spindlebore: 155 mm spindle taper: M 160 spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6; 14,7 - 62; 58 - 250; 235 - 1.000 rpm main motor power: 30 kW number of feeds: 160 longitudinal feed range: 0,032 - 38,9 mm/r cross feed range: 0,016 - 19,45 mm/r number of threads: metric thread range (80): 0,5 - 480 mm inch thread rangel (80): 60 - 1/16 Tpi module thread range (80): 0,125 - 120 DP thread range (80): 240 - 1/4 cross slide travel: 525 mm top slide travel: 270 mm tailstock quill diameter: 125 mm tailstock quill taper: MK 6 tailstock travel: 260 mm weight approx.: 8.050 kg
            500 mm
            1.090 mm
            690 mm
            1.250 mm
            700 mm
            1.500 mm
            . 15 Nr
            155 mm
            160 M
            30 kW
            525 mm
            270 mm
            125 mm
            6 MK
            260 mm
            8.050 kg
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"
            (sample photo)

            Further turning lengths:


            turning length 1.500 mm  € 78.250,- turning length 3.000 mm  € 84.600,- turning length 4.000 mm  € 95.200,- turning length 6.000 mm  € 118.090,-

            entre height: 500 mm
            swing over bed: 1.090 mm
            swing over cross slide: 690 mm
            swing in gap: 1.250 mm
            width of bed: 700 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 15
            spindlebore: 155 mm
            spindle taper: M 160
            spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6; 14,7 - 62; 58 - 250; 235 - 1.000 rpm
            main motor power: 30 kW
            number of feeds: 160
            longitudinal feed range: 0,032 - 38,9 mm/r
            cross feed range: 0,016 - 19,45 mm/r
            number of threads:
            metric thread range (80): 0,5 - 480 mm
            inch thread rangel (80): 60 - 1/16 Tpi
            module thread range (80): 0,125 - 120
            DP thread range (80): 240 - 1/4
            cross slide travel: 525 mm
            top slide travel: 270 mm
            tailstock quill diameter: 125 mm
            tailstock quill taper: MK 6
            tailstock travel: 260 mm
            weight approx.: 8.050 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 800 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2361 · Center Lathe

          ZMM - CU 800 RD - - -

          Technical details
          400 mm︱ 890 mm︱ 490 mm︱ 1.050 mm︱ 700 mm︱ 1.500 mm︱ . 15 Nr︱ 155 mm︱ 160 M︱ 30 kW︱ 525 mm︱ 270 mm︱ 125 mm︱ 6 MK︱ 260 mm︱ 7.500 kg︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) turning length 1.500 mm  € 70.050,- turning length 3.000 mm  € 76.400,- turning length 5.000 mm  € 92.370,- turning length 6.000 mm  € 109.890,- entre height: 400 mm swing over bed: 890 mm swing over cross slide: 490 mm swing in gap: 1.050 mm width of bed: 700 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 15 spindlebore: 155 mm spindle taper: M 160 spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6; 14,7 - 62; 58 - 250; 235 - 1.000 rpm main motor power: 30 kW number of feeds: 160 longitudinal feed range: 0,032 - 38,9 mm/r cross feed range: 0,016 - 19,45 mm/r number of threads: metric thread range (80): 0,5 - 480 mm inch thread rangel (80): 60 - 1/16 Tpi module thread range (80): 0,125 - 120 DP thread range (80): 240 - 1/4 cross slide travel: 525 mm top slide travel: 270 mm tailstock quill diameter: 125 mm tailstock quill taper: MK 6 tailstock travel: 260 mm weight approx.: 7.500 kg
            400 mm
            890 mm
            490 mm
            1.050 mm
            700 mm
            1.500 mm
            . 15 Nr
            155 mm
            160 M
            30 kW
            525 mm
            270 mm
            125 mm
            6 MK
            260 mm
            7.500 kg
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"
            (sample photo)


            turning length 1.500 mm  € 70.050,- turning length 3.000 mm  € 76.400,- turning length 5.000 mm  € 92.370,- turning length 6.000 mm  € 109.890,-

            entre height: 400 mm
            swing over bed: 890 mm
            swing over cross slide: 490 mm
            swing in gap: 1.050 mm
            width of bed: 700 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 15
            spindlebore: 155 mm
            spindle taper: M 160
            spindle speeds (infinitely variable in 4 subranges): 3,7 - 15,6; 14,7 - 62; 58 - 250; 235 - 1.000 rpm
            main motor power: 30 kW
            number of feeds: 160
            longitudinal feed range: 0,032 - 38,9 mm/r
            cross feed range: 0,016 - 19,45 mm/r
            number of threads:
            metric thread range (80): 0,5 - 480 mm
            inch thread rangel (80): 60 - 1/16 Tpi
            module thread range (80): 0,125 - 120
            DP thread range (80): 240 - 1/4
            cross slide travel: 525 mm
            top slide travel: 270 mm
            tailstock quill diameter: 125 mm
            tailstock quill taper: MK 6
            tailstock travel: 260 mm
            weight approx.: 7.500 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 THS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2359 · Center Lathe

          ZMM - C 10 THS - - -

          Technical details
          430 mm︱ 860 mm︱ 620 mm︱ 1.050 mm︱ 560 mm︱ 1.500 mm︱ . 11 Nr︱ 132 mm︱ 140 M︱ 15 kW︱ 435 mm︱ 150 mm︱ 105 mm︱ 6 MK︱ 225 mm︱ 4.650 kg︱
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths:   turning length 1.500 mm € 53.210,- turning length 2.000 mm € 55.390,- turning length 4.000 mm € 69.730,- turning length 5.000 mm € 78.860,- turning length 6.000 mm € 88.640,- centre height: 430 mm swing over bed: 860 mm swing over cross slide: 620 mm swing in gap: 1.050 mm width of bed: 560 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 11 spindlebore: 132 mm spindle taper: M 140 spindle speeds (infinitely variable in 3 subranges): 7 - 42; 28 - 170; 165 - 1.015 rpm main motor power: 15 kW number of feeds: 150 longitudinal feed range: 0,039 - 18 mm/r cross feed range: 0,02 - 9 mm/r number of threads: metric thread range (76): 0,5 - 180 mm inch thread rangel (76): 60 - 1/6 Tpi module thread range (76): 0,125 - 45 DP thread range (76): 240 - 2/3 cross slide travel: 435 mm top slide travel: 150 mm tailstock quill diameter: 105 mm tailstock quill taper: MK 6 tailstock travel: 225 mm weight approx.: 4.650 kg
            430 mm
            860 mm
            620 mm
            1.050 mm
            560 mm
            1.500 mm
            . 11 Nr
            132 mm
            140 M
            15 kW
            435 mm
            150 mm
            105 mm
            6 MK
            225 mm
            4.650 kg
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            steady and following rest
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:

             
            turning length 1.500 mm € 53.210,- turning length 2.000 mm € 55.390,- turning length 4.000 mm € 69.730,- turning length 5.000 mm € 78.860,- turning length 6.000 mm € 88.640,-

            centre height: 430 mm
            swing over bed: 860 mm
            swing over cross slide: 620 mm
            swing in gap: 1.050 mm
            width of bed: 560 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 11
            spindlebore: 132 mm
            spindle taper: M 140
            spindle speeds (infinitely variable in 3 subranges): 7 - 42; 28 - 170; 165 - 1.015 rpm
            main motor power: 15 kW
            number of feeds: 150
            longitudinal feed range: 0,039 - 18 mm/r
            cross feed range: 0,02 - 9 mm/r
            number of threads:
            metric thread range (76): 0,5 - 180 mm
            inch thread rangel (76): 60 - 1/6 Tpi
            module thread range (76): 0,125 - 45
            DP thread range (76): 240 - 2/3
            cross slide travel: 435 mm
            top slide travel: 150 mm
            tailstock quill diameter: 105 mm
            tailstock quill taper: MK 6
            tailstock travel: 225 mm
            weight approx.: 4.650 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 325 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2349 · Center Lathe

          ZMM - CU 325 RD - - -

          Technical details
          165 mm︱ 400 mm︱ 190 mm︱ 440 mm︱ 200 mm︱ 750 mm︱ . 5 Nr︱ 32 mm︱ 4,5 MK︱ 2,2 kW︱ 150 mm︱ 95 mm︱ 40 mm︱ 3 MK︱ 100 mm︱ 770 kg︱
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.000 mm € 18.650,- center height: 165 mm swing over bed: 400 mm swing over cross slide: 190 mm swing in gap: 440 mm width of bed: 200 mm distance between centers: 750 mm spindle nose / DIN55027: No. 5 spindle bore: 32 mm spindle taper: MT 4,5 spindle speeds (infinitely variable in 2 subranges): 85 - 405; 470 - 2.200 r/min main motor power: 2,2 kW number of feeds: 48 longitudinal feed range: 0,006 - 1,77 mm/r cross feed range: 0,003 - 0,885 mm/r number of threads: metric thread range (48): 0,1 - 285 mm inch thread rangel (53): 75 - 2,5 Tpi module thread range (19): 0,1 - 1,75 DP thread range (19): 70 - 4 cross slide travel: 150 mm top slide travel: 95 mm tailstock quill diameter: 40 mm tailstock quill taper: MK 3 tailstock travel: 100 mm weight approx.: 770 kg
            165 mm
            400 mm
            190 mm
            440 mm
            200 mm
            750 mm
            . 5 Nr
            32 mm
            4,5 MK
            2,2 kW
            150 mm
            95 mm
            40 mm
            3 MK
            100 mm
            770 kg
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 160 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:

            turning length 1.000 mm € 18.650,-

            center height: 165 mm
            swing over bed: 400 mm
            swing over cross slide: 190 mm
            swing in gap: 440 mm
            width of bed: 200 mm
            distance between centers: 750 mm
            spindle nose / DIN55027: No. 5
            spindle bore: 32 mm
            spindle taper: MT 4,5
            spindle speeds (infinitely variable in 2 subranges): 85 - 405; 470 - 2.200 r/min
            main motor power: 2,2 kW
            number of feeds: 48
            longitudinal feed range: 0,006 - 1,77 mm/r
            cross feed range: 0,003 - 0,885 mm/r
            number of threads:
            metric thread range (48): 0,1 - 285 mm
            inch thread rangel (53): 75 - 2,5 Tpi
            module thread range (19): 0,1 - 1,75
            DP thread range (19): 70 - 4
            cross slide travel: 150 mm
            top slide travel: 95 mm
            tailstock quill diameter: 40 mm
            tailstock quill taper: MK 3
            tailstock travel: 100 mm
            weight approx.: 770 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 TMS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2357 · Center Lathe

          ZMM - C 10 TMS - - -

          Technical details
          380 mm︱ 760 mm︱ 520 mm︱ 950 mm︱ 560 mm︱ 3.000 mm︱ . 11 Nr︱ 132 mm︱ 140 M︱ 15 kW︱ 410 mm︱ 150 mm︱ 105 mm︱ 6 MK︱ 225 mm︱ 4.470 kg︱
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.500 mm € 48.810,- turning length 2.000 mm € 50.990,- turning length 4.000 mm € 65.430,- turning length 5.000 mm € 74.460,- turning length 6.000 mm € 84.340,- centre height: 380 mm swing over bed: 760 mm swing over cross slide: 520 mm swing in gap: 950 mm width of bed: 560 mm distance between centers: 3.000 mm spindle nose / DIN55027: No. 11 spindlebore: 132 mm spindle taper: M 140 Drehzahlen (variabel mit 3 Stufen): 7 - 42; 28 - 170; 165 - 1.015 rpm main motor power: 15 kW number of feeds: 150 longitudinal feed range: 0,039 - 18 mm/r cross feed range: 0,02 - 9 mm/r number of threads: metric thread range (76): 0,5 - 180 mm inch thread rangel (76): 60 - 1/6 Tpi module thread range (76): 0,125 - 45 DP thread range (76): 240 - 2/3 cross slide travel: 410 mm top slide travel: 150 mm tailstock quill diameter: 105 mm tailstock quill taper: MK 6 tailstock travel: 225 mm weight approx.: 4.470 kg
            380 mm
            760 mm
            520 mm
            950 mm
            560 mm
            3.000 mm
            . 11 Nr
            132 mm
            140 M
            15 kW
            410 mm
            150 mm
            105 mm
            6 MK
            225 mm
            4.470 kg
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            steady and following rest
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:


            turning length 1.500 mm € 48.810,- turning length 2.000 mm € 50.990,- turning length 4.000 mm € 65.430,- turning length 5.000 mm € 74.460,- turning length 6.000 mm € 84.340,-

            centre height: 380 mm
            swing over bed: 760 mm
            swing over cross slide: 520 mm
            swing in gap: 950 mm
            width of bed: 560 mm
            distance between centers: 3.000 mm
            spindle nose / DIN55027: No. 11
            spindlebore: 132 mm
            spindle taper: M 140
            Drehzahlen (variabel mit 3 Stufen): 7 - 42; 28 - 170; 165 - 1.015 rpm
            main motor power: 15 kW
            number of feeds: 150
            longitudinal feed range: 0,039 - 18 mm/r
            cross feed range: 0,02 - 9 mm/r
            number of threads:
            metric thread range (76): 0,5 - 180 mm
            inch thread rangel (76): 60 - 1/6 Tpi
            module thread range (76): 0,125 - 45
            DP thread range (76): 240 - 2/3
            cross slide travel: 410 mm
            top slide travel: 150 mm
            tailstock quill diameter: 105 mm
            tailstock quill taper: MK 6
            tailstock travel: 225 mm
            weight approx.: 4.470 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 400 TM


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2323 · Center Lathe

          ZMM - C 400 TM - - -

          Technical details
          200 mm︱ 400 mm︱ 235 mm︱ 550 mm︱ 320 mm︱ 1.000 mm︱ . 6 Nr︱ 52 mm︱ 6 MK︱ 4 kW︱ 235 mm︱ 110 mm︱ 50 mm︱ 4 MK︱ 100 mm︱ 2.750 mm︱ 1.100 mm︱ 1.600 mm︱ 1.540 kg︱
          driven by manual transmission 3-axes digital readout Fagor Innova-30i-T longitudinal stop for 1 position quick change toolpost Multisuisse with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle nose Nr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment removable bridge 1 pce. flange plate for lathe chuck Ø 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 750 mm € 22.980,- turning length 1.500 mm € 24.440,- center height: 200 mm swing over bed: 400 mm swing over cross slide: 235 mm swing in gap: 550 mm width of bed: 320 mm distance between centers: 1.000 mm spindle nose / DIN55027: No. 6 spindle bore: 52 mm spindle taper: MT 6 spindle speeds (12): 50-2.240 rpm main motor power: 4 kW number of feeds: 80 longitudinal feed range: 0,015 - 0,6 mm/U cross feed range: 0,0075 - 0,3 mm/U number of threads: 40 metric thread range: 0,25 - 7,5 mm inch thread rangel: 120 - 4 Tpi module thread range: 0,0625 - 1,875 DP thread range: 480 - 16 cross slide travel: 235 mm top slide travel: 110 mm tailstock quill diameter: 50 mm tailstock quill taper: MK 4 tailstock travel: 100 mm length: 2.750 mm width: 1.100 mm height: 1.600 mm weight approx.: 1.540 kg
            200 mm
            400 mm
            235 mm
            550 mm
            320 mm
            1.000 mm
            . 6 Nr
            52 mm
            6 MK
            4 kW
            235 mm
            110 mm
            50 mm
            4 MK
            100 mm
            2.750 mm
            1.100 mm
            1.600 mm
            1.540 kg
            Description :
            driven by manual transmission
            3-axes digital readout Fagor Innova-30i-T
            longitudinal stop for 1 position
            quick change toolpost Multisuisse with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle nose Nr. 6 DIN 55027
            four way rapid traverse device
            spindle dead center
            coolant equipment
            removable bridge
            1 pce. flange plate for lathe chuck Ø 200 mm
            1 adapter sleeve
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:


            turning length 750 mm € 22.980,- turning length 1.500 mm € 24.440,-



            center height: 200 mm
            swing over bed: 400 mm
            swing over cross slide: 235 mm
            swing in gap: 550 mm
            width of bed: 320 mm
            distance between centers: 1.000 mm
            spindle nose / DIN55027: No. 6
            spindle bore: 52 mm
            spindle taper: MT 6
            spindle speeds (12): 50-2.240 rpm
            main motor power: 4 kW
            number of feeds: 80
            longitudinal feed range: 0,015 - 0,6 mm/U
            cross feed range: 0,0075 - 0,3 mm/U
            number of threads: 40
            metric thread range: 0,25 - 7,5 mm
            inch thread rangel: 120 - 4 Tpi
            module thread range: 0,0625 - 1,875
            DP thread range: 480 - 16
            cross slide travel: 235 mm
            top slide travel: 110 mm
            tailstock quill diameter: 50 mm
            tailstock quill taper: MK 4
            tailstock travel: 100 mm
            length: 2.750 mm
            width: 1.100 mm
            height: 1.600 mm
            weight approx.: 1.540 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 630 RD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2355 · Center Lathe

          ZMM - CU 630 RD - - -

          Technical details
          315 mm︱ 630 mm︱ 430 mm︱ 830 mm︱ 400 mm︱ 2.000 mm︱ . 11 Nr︱ 103 mm︱ 120 M︱ 11 kW︱ 315 mm︱ 130 mm︱ 90 mm︱ 5 MK︱ 230 mm︱ 3.310 kg︱
          driven by variable speed control (2 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths:   turning length 1.000 mm € 40.820,- turning length 1.500 mm € 41.750,- turning length 3.000 mm € 46.940,- turning length 4.000 mm € 51.320,- turning length 5.000 mm € 62.260,- entre height: 315 mm swing over bed: 630 mm swing over cross slide: 430 mm swing in gap: 830 mm width of bed: 400 mm distance between centers: 2.000 mm spindle nose / DIN55027: No. 11 spindlebore: 103 mm spindle taper: M 120 spindle speeds (infinitely variable in 3 subranges): 16 - 63; 63 - 250; 315 - 1.250 r/min main motor power: 11 kW number of feeds: 120 longitudinal feed range: 0,04 - 12 mm/r cross feed range: 0,02 - 6 mm/r number of threads: metric thread range (64): 0,5 - 120 mm inch thread rangel (64): 60 - 1/4 Tpi module thread range (64): 0,125 - 30 DP thread range (64): 240 - 1 cross slide travel: 315 mm top slide travel: 130 mm tailstock quill diameter: 90 mm tailstock quill taper: MK 5 tailstock travel: 230 mm weight approx.: 3.310 kg
            315 mm
            630 mm
            430 mm
            830 mm
            400 mm
            2.000 mm
            . 11 Nr
            103 mm
            120 M
            11 kW
            315 mm
            130 mm
            90 mm
            5 MK
            230 mm
            3.310 kg
            Description :
            driven by variable speed control (2 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:
             
            turning length 1.000 mm € 40.820,- turning length 1.500 mm € 41.750,- turning length 3.000 mm € 46.940,- turning length 4.000 mm € 51.320,- turning length 5.000 mm € 62.260,-



            entre height: 315 mm
            swing over bed: 630 mm
            swing over cross slide: 430 mm
            swing in gap: 830 mm
            width of bed: 400 mm
            distance between centers: 2.000 mm
            spindle nose / DIN55027: No. 11
            spindlebore: 103 mm
            spindle taper: M 120
            spindle speeds (infinitely variable in 3 subranges): 16 - 63; 63 - 250; 315 - 1.250 r/min
            main motor power: 11 kW
            number of feeds: 120
            longitudinal feed range: 0,04 - 12 mm/r
            cross feed range: 0,02 - 6 mm/r
            number of threads:
            metric thread range (64): 0,5 - 120 mm
            inch thread rangel (64): 60 - 1/4 Tpi
            module thread range (64): 0,125 - 30
            DP thread range (64): 240 - 1
            cross slide travel: 315 mm
            top slide travel: 130 mm
            tailstock quill diameter: 90 mm
            tailstock quill taper: MK 5
            tailstock travel: 230 mm
            weight approx.: 3.310 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 500 MRD


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2353 · Center Lathe

          ZMM - CU 500 MRD - - -

          Technical details
          250 mm︱ 500 mm︱ 300 mm︱ 700 mm︱ 400 mm︱ 1.500 mm︱ . 8 Nr︱ 72 mm︱ 80 M︱ 11 kW︱ 315 mm︱ 130 mm︱ 90 mm︱ 5 MK︱ 230 mm︱ 2.950 kg︱
          driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.000 mm € 35.200,- turning length 2.000 mm € 37.510,- turning length 3.000 mm € 41.320,- turning length 4.000 mm € 45.700,- turning length 5.000 mm € 56.540,- centre height: 250 mm swing over bed: 500 mm swing over cross slide: 300 mm swing in gap: 700 mm width of bed: 400 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 8 spindlebore: 72 mm spindle taper: MT 80 spindle speeds (infinitely variable in 3 subranges): 25 - 100; 100 - 400; 500 - 2.000 rpm main motor power: 11 kW number of feeds: 120 longitudinal feed range: 0,04 - 12 mm/r cross feed range: 0,02 - 6 mm/r number of threads: metric thread range (64): 0,5 - 120 mm inch thread rangel (64): 60 - 1/4 Tpi module thread range (64): 0,125 - 30 DP thread range (64): 240 - 1 cross slide travel: 315 mm top slide travel: 130 mm tailstock quill diameter: 90 mm tailstock quill taper: MK 5 tailstock travel: 230 mm weight approx.: 2.950 kg
            250 mm
            500 mm
            300 mm
            700 mm
            400 mm
            1.500 mm
            . 8 Nr
            72 mm
            80 M
            11 kW
            315 mm
            130 mm
            90 mm
            5 MK
            230 mm
            2.950 kg
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:

            turning length 1.000 mm € 35.200,- turning length 2.000 mm € 37.510,- turning length 3.000 mm € 41.320,- turning length 4.000 mm € 45.700,- turning length 5.000 mm € 56.540,-



            centre height: 250 mm
            swing over bed: 500 mm
            swing over cross slide: 300 mm
            swing in gap: 700 mm
            width of bed: 400 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 8
            spindlebore: 72 mm
            spindle taper: MT 80
            spindle speeds (infinitely variable in 3 subranges): 25 - 100; 100 - 400; 500 - 2.000 rpm
            main motor power: 11 kW
            number of feeds: 120
            longitudinal feed range: 0,04 - 12 mm/r
            cross feed range: 0,02 - 6 mm/r
            number of threads:
            metric thread range (64): 0,5 - 120 mm
            inch thread rangel (64): 60 - 1/4 Tpi
            module thread range (64): 0,125 - 30
            DP thread range (64): 240 - 1
            cross slide travel: 315 mm
            top slide travel: 130 mm
            tailstock quill diameter: 90 mm
            tailstock quill taper: MK 5
            tailstock travel: 230 mm
            weight approx.: 2.950 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 325


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2110 · Center Lathe

          ZMM - CU 325 - - -

          Technical details
          165 mm︱ 325 mm︱ 190 mm︱ 440 mm︱ 200 mm︱ 750 mm︱ . 5 Nr︱ 32 mm︱ 4,5 MK︱ 2,2 kW︱ 150 mm︱ 95 mm︱ 40 mm︱ 3 MK︱ 100 mm︱ 770 kg︱
          driven by manual transmission 3-axes digital readout quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.000 mm € 16.770,- center height: 165 mm swing over bed: 325 mm swing over cross slide: 190 mm swing in gap: 440 mm width of bed: 200 mm distance between centers: 750 mm spindle nose / DIN55027: No. 5 spindle bore: 32 mm spindle taper: MT 4,5 spindle speeds (12): 85 - 2.000 rpm main motor power: 2,2 kW number of feeds: 48 longitudinal feed range: 0,006 - 1,77 mm/r cross feed range: 0,003 - 0,885 mm/r number of threads: metric thread range (48): 0,1 - 285 mm inch thread rangel (53): 75 - 2,5 Tpi module thread range (19): 0,1 - 1,75 DP thread range (19): 70 - 4 cross slide travel: 150 mm top slide travel: 95 mm tailstock quill diameter: 40 mm tailstock quill taper: MK 3 tailstock travel: 100 mm weight approx.: 770 kg
            165 mm
            325 mm
            190 mm
            440 mm
            200 mm
            750 mm
            . 5 Nr
            32 mm
            4,5 MK
            2,2 kW
            150 mm
            95 mm
            40 mm
            3 MK
            100 mm
            770 kg
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 160 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:


            turning length 1.000 mm € 16.770,-

            center height: 165 mm
            swing over bed: 325 mm
            swing over cross slide: 190 mm
            swing in gap: 440 mm
            width of bed: 200 mm
            distance between centers: 750 mm
            spindle nose / DIN55027: No. 5
            spindle bore: 32 mm
            spindle taper: MT 4,5
            spindle speeds (12): 85 - 2.000 rpm
            main motor power: 2,2 kW
            number of feeds: 48
            longitudinal feed range: 0,006 - 1,77 mm/r
            cross feed range: 0,003 - 0,885 mm/r
            number of threads:
            metric thread range (48): 0,1 - 285 mm
            inch thread rangel (53): 75 - 2,5 Tpi
            module thread range (19): 0,1 - 1,75
            DP thread range (19): 70 - 4
            cross slide travel: 150 mm
            top slide travel: 95 mm
            tailstock quill diameter: 40 mm
            tailstock quill taper: MK 3
            tailstock travel: 100 mm
            weight approx.: 770 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 11 MTS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-2006 · Center Lathe

          ZMM - C 11 MTS - - -

          Technical details
          300 mm︱ 600 mm︱ 400 mm︱ 800 mm︱ 400 mm︱ 2.000 mm︱ . 8 Nr︱ 80 mm︱ 90 M︱ 15 kW︱ 315 mm︱ 130 mm︱ 90 mm︱ 5 MK︱ 230 mm︱ 3.600 mm︱ 1.500 mm︱ 1.650 mm︱ 3.100 kg︱
          driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" Further turning lengths: turning length 1.000 mm € 37.300,- turning length 1.500 mm € 38.130,- turning length 3.000 mm € 43.320,- turning length 4.000 mm € 47.600,- turning length 5.000 mm € 58.340,- center height: 300 mm swing over bed: 600 mm swing over cross slide: 400 mm swing in gap: 800 mm width of bed: 400 mm distance between centers: 2.000 mm spindle nose / DIN55027: No. 8 spindle bore: 80 mm spindle taper: MT90 spindle speeds (infinitely variable in 3 subranges): 8-62; 62-500; 250-2.000 rpm main motor power: 15 kW number of feeds: 160 longitudinal feed range: 0,02 - 12 mm/U cross feed range: 0,01 - 6 mm/U number of threads: 80 metric thread range: 0,25 - 120 mm inch thread rangel: 120 - 1/4 Tpi module thread range: 0,0625 - 30 DP thread range: 480 - 1 cross slide travel: 315 mm top slide travel: 130 mm tailstock quill diameter: 90 mm tailstock quill taper: MK 5 tailstock travel: 230 mm length: 3.600 mm width: 1.500 mm height: 1.650 mm weight: 3.100 kg
            300 mm
            600 mm
            400 mm
            800 mm
            400 mm
            2.000 mm
            . 8 Nr
            80 mm
            90 M
            15 kW
            315 mm
            130 mm
            90 mm
            5 MK
            230 mm
            3.600 mm
            1.500 mm
            1.650 mm
            3.100 kg
            Description :
            driven by variable speed control (3 steps)
            3-axes digital readout Fagor with CSS (constant surface speed)
            quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            Further turning lengths:


            turning length 1.000 mm € 37.300,- turning length 1.500 mm € 38.130,- turning length 3.000 mm € 43.320,- turning length 4.000 mm € 47.600,- turning length 5.000 mm € 58.340,-

            center height: 300 mm
            swing over bed: 600 mm
            swing over cross slide: 400 mm
            swing in gap: 800 mm
            width of bed: 400 mm
            distance between centers: 2.000 mm
            spindle nose / DIN55027: No. 8
            spindle bore: 80 mm
            spindle taper: MT90
            spindle speeds (infinitely variable in 3 subranges): 8-62; 62-500; 250-2.000 rpm
            main motor power: 15 kW
            number of feeds: 160
            longitudinal feed range: 0,02 - 12 mm/U
            cross feed range: 0,01 - 6 mm/U
            number of threads: 80
            metric thread range: 0,25 - 120 mm
            inch thread rangel: 120 - 1/4 Tpi
            module thread range: 0,0625 - 30
            DP thread range: 480 - 1
            cross slide travel: 315 mm
            top slide travel: 130 mm
            tailstock quill diameter: 90 mm
            tailstock quill taper: MK 5
            tailstock travel: 230 mm
            length: 3.600 mm
            width: 1.500 mm
            height: 1.650 mm
            weight: 3.100 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 400 TS


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1499 · Center Lathe

          ZMM - C 400 TS - - -

          Technical details
          200 mm︱ 400 mm︱ 235 mm︱ 550 mm︱ 320 mm︱ 750 mm︱ . 6 Nr︱ 52 mm︱ 6 MK︱ 7,5 kW︱ 235 mm︱ 110 mm︱ 50 mm︱ 4 MK︱ 100 mm︱ 1.530 kg︱
          driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths:  turning length 1.000 mm  € 27.020,-  turning length 1.500 mm  € 28.650,- center height: 200 mm swing over bed: 400 mm swing over cross slide: 235 mm swing in gap: 550 mm width of bed: 320 mm distance between centers: 750 mm spindle nose / DIN55027: No. 6 spindle bore: 52 mm spindle taper: MT 6 spindle speeds (infinitely variable in 4 subranges): 18-98; 48-265; 144-790; 385-2.120 rpm main motor power: 7,5 kW number of feeds: 80 longitudinal feed range: 0,015 - 0,6 mm/U cross feed range: 0,0075 - 0,3 mm/U number of threads: 40 metric thread range: 0,25 - 7,5 mm inch thread rangel: 120 - 4 Tpi module thread range: 0,0625 - 1,875 DP thread range: 480 - 16 cross slide travel: 235 mm top slide travel: 110 mm tailstock quill diameter: 50 mm tailstock quill taper: MK 4 tailstock travel: 100 mm weight approx.: 1.530 kg
            200 mm
            400 mm
            235 mm
            550 mm
            320 mm
            750 mm
            . 6 Nr
            52 mm
            6 MK
            7,5 kW
            235 mm
            110 mm
            50 mm
            4 MK
            100 mm
            1.530 kg
            Description :
            driven by variable speed control (4 steps)
            3-axes digital readout FAGOR with CSS (constant surface speed)
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 200 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:

             turning length 1.000 mm  € 27.020,-  turning length 1.500 mm  € 28.650,-

            center height: 200 mm
            swing over bed: 400 mm
            swing over cross slide: 235 mm
            swing in gap: 550 mm
            width of bed: 320 mm
            distance between centers: 750 mm
            spindle nose / DIN55027: No. 6
            spindle bore: 52 mm
            spindle taper: MT 6
            spindle speeds (infinitely variable in 4 subranges): 18-98; 48-265; 144-790; 385-2.120 rpm
            main motor power: 7,5 kW
            number of feeds: 80
            longitudinal feed range: 0,015 - 0,6 mm/U
            cross feed range: 0,0075 - 0,3 mm/U
            number of threads: 40
            metric thread range: 0,25 - 7,5 mm
            inch thread rangel: 120 - 4 Tpi
            module thread range: 0,0625 - 1,875
            DP thread range: 480 - 16
            cross slide travel: 235 mm
            top slide travel: 110 mm
            tailstock quill diameter: 50 mm
            tailstock quill taper: MK 4
            tailstock travel: 100 mm
            weight approx.: 1.530 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1000


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1495 · Center Lathe

          ZMM - CU 1000 - - -

          Technical details
          500 mm︱ 1.090 mm︱ 690 mm︱ 1.250 mm︱ 700 mm︱ 1.500 mm︱ . 15 Nr︱ 155 mm︱ 160 M︱ 22/30 kW︱ 525 mm︱ 270 mm︱ 125 mm︱ 6 MK︱ 260 mm︱ 8.050 kg︱
          driven by manual transmission 3-axes digital readout quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths turning length 1.500 mm  € 71.800,- turning length 3.000 mm  € 77.490,- turning length 4.000 mm  € 87.940,- turning length 6.000 mm  € 110.230,- entre height: 500 mm swing over bed: 1.090 mm swing over cross slide: 690 mm swing in gap: 1.250 mm width of bed: 700 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 15 spindlebore: 155 mm spindle taper: M 160 spindle speeds (24): 6,3 - 1.250 rpm main motor power: 22/30 kW number of feeds: 160 longitudinal feed range: 0,032 - 38,9 mm/r cross feed range: 0,016 - 19,45 mm/r number of threads: metric thread range (80): 0,5 - 480 mm inch thread rangel (80): 60 - 1/16 Tpi module thread range (80): 0,125 - 120 DP thread range (80): 240 - 1/4 cross slide travel: 525 mm top slide travel: 270 mm tailstock quill diameter: 125 mm tailstock quill taper: MK 6 tailstock travel: 260 mm weight approx.: 8.050 kg
            500 mm
            1.090 mm
            690 mm
            1.250 mm
            700 mm
            1.500 mm
            . 15 Nr
            155 mm
            160 M
            22/30 kW
            525 mm
            270 mm
            125 mm
            6 MK
            260 mm
            8.050 kg
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"
            (sample photo)

            Further turning lengths


            turning length 1.500 mm  € 71.800,- turning length 3.000 mm  € 77.490,- turning length 4.000 mm  € 87.940,- turning length 6.000 mm  € 110.230,-



            entre height: 500 mm
            swing over bed: 1.090 mm
            swing over cross slide: 690 mm
            swing in gap: 1.250 mm
            width of bed: 700 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 15
            spindlebore: 155 mm
            spindle taper: M 160
            spindle speeds (24): 6,3 - 1.250 rpm
            main motor power: 22/30 kW
            number of feeds: 160
            longitudinal feed range: 0,032 - 38,9 mm/r
            cross feed range: 0,016 - 19,45 mm/r
            number of threads:
            metric thread range (80): 0,5 - 480 mm
            inch thread rangel (80): 60 - 1/16 Tpi
            module thread range (80): 0,125 - 120
            DP thread range (80): 240 - 1/4
            cross slide travel: 525 mm
            top slide travel: 270 mm
            tailstock quill diameter: 125 mm
            tailstock quill taper: MK 6
            tailstock travel: 260 mm
            weight approx.: 8.050 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 TH


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1401 · Center Lathe

          ZMM - C 10 TH - - -

          Technical details
          430 mm︱ 860 mm︱ 620 mm︱ 1.050 mm︱ 560 mm︱ 1.500 mm︱ . 11 Nr︱ 132 mm︱ 140 M︱ 15 kW︱ 435 mm︱ 150 mm︱ 105 mm︱ 6 MK︱ 225 mm︱ 4.650 kg︱
          driven by conventional transmission 3-axes digital readout quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.500 mm € 47.040,- turning length 2.000 mm € 49.120,- turning length 4.000 mm € 62.960,- turning length 5.000 mm € 71.850,- turning length 6.000 mm € 81.400,- centre height: 430 mm swing over bed: 860 mm swing over cross slide: 620 mm swing in gap: 1.050 mm width of bed: 560 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 11 spindlebore: 132 mm spindle taper: M 140 spindle speeds (17): 7,5 - 1.015 rpm main motor power: 15 kW number of feeds: 150 longitudinal feed range: 0,039 - 18 mm/r cross feed range: 0,02 - 9 mm/r number of threads: metric thread range (76): 0,5 - 180 mm inch thread rangel (76): 60 - 1/6 Tpi module thread range (76): 0,125 - 45 DP thread range (76): 240 - 2/3 cross slide travel: 435 mm top slide travel: 150 mm tailstock quill diameter: 105 mm tailstock quill taper: MK 6 tailstock travel: 225 mm weight approx.: 4.650 kg
            430 mm
            860 mm
            620 mm
            1.050 mm
            560 mm
            1.500 mm
            . 11 Nr
            132 mm
            140 M
            15 kW
            435 mm
            150 mm
            105 mm
            6 MK
            225 mm
            4.650 kg
            Description :
            driven by conventional transmission
            3-axes digital readout
            quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            steady and following rest
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:


            turning length 1.500 mm € 47.040,- turning length 2.000 mm € 49.120,- turning length 4.000 mm € 62.960,- turning length 5.000 mm € 71.850,- turning length 6.000 mm € 81.400,-

            centre height: 430 mm
            swing over bed: 860 mm
            swing over cross slide: 620 mm
            swing in gap: 1.050 mm
            width of bed: 560 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 11
            spindlebore: 132 mm
            spindle taper: M 140
            spindle speeds (17): 7,5 - 1.015 rpm
            main motor power: 15 kW
            number of feeds: 150
            longitudinal feed range: 0,039 - 18 mm/r
            cross feed range: 0,02 - 9 mm/r
            number of threads:
            metric thread range (76): 0,5 - 180 mm
            inch thread rangel (76): 60 - 1/6 Tpi
            module thread range (76): 0,125 - 45
            DP thread range (76): 240 - 2/3
            cross slide travel: 435 mm
            top slide travel: 150 mm
            tailstock quill diameter: 105 mm
            tailstock quill taper: MK 6
            tailstock travel: 225 mm
            weight approx.: 4.650 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 800


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1493 · Center Lathe

          ZMM - CU 800 - - -

          Technical details
          400 mm︱ 890 mm︱ 490 mm︱ 1.050 mm︱ 700 mm︱ 1.500 mm︱ . 15 Nr︱ 155 mm︱ 160 M︱ 22/30 kW︱ 525 mm︱ 270 mm︱ 125 mm︱ 6 MK︱ 260 mm︱ 7.500 kg︱
          driven by manual transmission 3-axes digital readout quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.500 mm  € 63.600,- turning length 3.000 mm  € 69.290,- turning length 5.000 mm  € 84.770,- turning length 6.000 mm  € 102.030,- entre height: 400 mm swing over bed: 890 mm swing over cross slide: 490 mm swing in gap: 1.050 mm width of bed: 700 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 15 spindlebore: 155 mm spindle taper: M 160 spindle speeds (24): 6,3 - 1.250 rpm main motor power: 22/30 kW number of feeds: 160 longitudinal feed range: 0,032 - 38,9 mm/r cross feed range: 0,016 - 19,45 mm/r number of threads: metric thread range (80): 0,5 - 480 mm inch thread rangel (80): 60 - 1/16 Tpi module thread range (80): 0,125 - 120 DP thread range (80): 240 - 1/4 cross slide travel: 525 mm top slide travel: 270 mm tailstock quill diameter: 125 mm tailstock quill taper: MK 6 tailstock travel: 260 mm weight approx.: 7.500 kg
            400 mm
            890 mm
            490 mm
            1.050 mm
            700 mm
            1.500 mm
            . 15 Nr
            155 mm
            160 M
            22/30 kW
            525 mm
            270 mm
            125 mm
            6 MK
            260 mm
            7.500 kg
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"
            (sample photo)


            Further turning lengths:


            turning length 1.500 mm  € 63.600,- turning length 3.000 mm  € 69.290,- turning length 5.000 mm  € 84.770,- turning length 6.000 mm  € 102.030,-

            entre height: 400 mm
            swing over bed: 890 mm
            swing over cross slide: 490 mm
            swing in gap: 1.050 mm
            width of bed: 700 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 15
            spindlebore: 155 mm
            spindle taper: M 160
            spindle speeds (24): 6,3 - 1.250 rpm
            main motor power: 22/30 kW
            number of feeds: 160
            longitudinal feed range: 0,032 - 38,9 mm/r
            cross feed range: 0,016 - 19,45 mm/r
            number of threads:
            metric thread range (80): 0,5 - 480 mm
            inch thread rangel (80): 60 - 1/16 Tpi
            module thread range (80): 0,125 - 120
            DP thread range (80): 240 - 1/4
            cross slide travel: 525 mm
            top slide travel: 270 mm
            tailstock quill diameter: 125 mm
            tailstock quill taper: MK 6
            tailstock travel: 260 mm
            weight approx.: 7.500 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 10 TM


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1399 · Center Lathe

          ZMM - C 10 TM - - -

          Technical details
          380 mm︱ 760 mm︱ 520 mm︱ 950 mm︱ 560 mm︱ 3.000 mm︱ . 11 Nr︱ 132 mm︱ 140 M︱ 11/15 kW︱ 410 mm︱ 150 mm︱ 105 mm︱ 6 MK︱ 225 mm︱ 4.470 kg︱
          driven by conventional transmission 3-axes digital readout quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position steady and following rest coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.500 mm € 43.740,- turning length 2.000 mm € 45.820,- turning length 4.000 mm € 59.660,- turning length 5.000 mm € 68.550,- turning length 6.000 mm € 78.100,- centre height: 380 mm swing over bed: 760 mm swing over cross slide: 520 mm swing in gap: 950 mm width of bed: 560 mm distance between centers: 3.000 mm spindle nose / DIN55027: No. 11 spindlebore: 132 mm spindle taper: M 140 spindle speeds (17): 7,5 - 1.015 rpm main motor power: 11/15 kW number of feeds: 150 longitudinal feed range: 0,039 - 18 mm/r cross feed range: 0,02 - 9 mm/r number of threads: metric thread range (76): 0,5 - 180 mm inch thread rangel (76): 60 - 1/6 Tpi module thread range (76): 0,125 - 45 DP thread range (76): 240 - 2/3 cross slide travel: 410 mm top slide travel: 150 mm tailstock quill diameter: 105 mm tailstock quill taper: MK 6 tailstock travel: 225 mm weight approx.: 4.470 kg
            380 mm
            760 mm
            520 mm
            950 mm
            560 mm
            3.000 mm
            . 11 Nr
            132 mm
            140 M
            11/15 kW
            410 mm
            150 mm
            105 mm
            6 MK
            225 mm
            4.470 kg
            Description :
            driven by conventional transmission
            3-axes digital readout
            quick change toolpost Amestra type Multifix with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3295/DIN6350, Ø 400 mm
            spindle dead center
            main motor with frequency invertor
            four way rapid traverse device
            foot pedal brake
            longitudinal stop for 1 position
            steady and following rest
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            tailstock quill reducer
            mechanized movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:


            turning length 1.500 mm € 43.740,- turning length 2.000 mm € 45.820,- turning length 4.000 mm € 59.660,- turning length 5.000 mm € 68.550,- turning length 6.000 mm € 78.100,-

            centre height: 380 mm
            swing over bed: 760 mm
            swing over cross slide: 520 mm
            swing in gap: 950 mm
            width of bed: 560 mm
            distance between centers: 3.000 mm
            spindle nose / DIN55027: No. 11
            spindlebore: 132 mm
            spindle taper: M 140
            spindle speeds (17): 7,5 - 1.015 rpm
            main motor power: 11/15 kW
            number of feeds: 150
            longitudinal feed range: 0,039 - 18 mm/r
            cross feed range: 0,02 - 9 mm/r
            number of threads:
            metric thread range (76): 0,5 - 180 mm
            inch thread rangel (76): 60 - 1/6 Tpi
            module thread range (76): 0,125 - 45
            DP thread range (76): 240 - 2/3
            cross slide travel: 410 mm
            top slide travel: 150 mm
            tailstock quill diameter: 105 mm
            tailstock quill taper: MK 6
            tailstock travel: 225 mm
            weight approx.: 4.470 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 630


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1491 · Center Lathe

          ZMM - CU 630 - - -

          Technical details
          315 mm︱ 630 mm︱ 430 mm︱ 830 mm︱ 400 mm︱ 2.000 mm︱ . 11 Nr︱ 103 mm︱ 120 M︱ 11 kW︱ 315 mm︱ 130 mm︱ 90 mm︱ 5 MK︱ 230 mm︱ 3.310 kg︱
          driven by manual transmission 3-axes digital readout quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.000 mm € 36.720,- turning length 1.500 mm € 37.500,- turning length 3.000 mm € 42.440,- turning length 4.000 mm € 46.580,- turning length 5.000 mm € 57.180,- entre height: 315 mm swing over bed: 630 mm swing over cross slide: 430 mm swing in gap: 830 mm width of bed: 400 mm distance between centers: 2.000 mm spindle nose / DIN55027: No. 11 spindlebore: 103 mm spindle taper: M 120 spindle speeds (17): 12,5 - 1.250 rpm main motor power: 11 kW number of feeds: 120 longitudinal feed range: 0,04 - 12 mm/r cross feed range: 0,02 - 6 mm/r number of threads: metric thread range (64): 0,5 - 120 mm inch thread rangel (64): 60 - 1/4 Tpi module thread range (64): 0,125 - 30 DP thread range (64): 240 - 1 cross slide travel: 315 mm top slide travel: 130 mm tailstock quill diameter: 90 mm tailstock quill taper: MK 5 tailstock travel: 230 mm weight approx.: 3.310 kg
            315 mm
            630 mm
            430 mm
            830 mm
            400 mm
            2.000 mm
            . 11 Nr
            103 mm
            120 M
            11 kW
            315 mm
            130 mm
            90 mm
            5 MK
            230 mm
            3.310 kg
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 315 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:


            turning length 1.000 mm € 36.720,- turning length 1.500 mm € 37.500,- turning length 3.000 mm € 42.440,- turning length 4.000 mm € 46.580,- turning length 5.000 mm € 57.180,-



            entre height: 315 mm
            swing over bed: 630 mm
            swing over cross slide: 430 mm
            swing in gap: 830 mm
            width of bed: 400 mm
            distance between centers: 2.000 mm
            spindle nose / DIN55027: No. 11
            spindlebore: 103 mm
            spindle taper: M 120
            spindle speeds (17): 12,5 - 1.250 rpm
            main motor power: 11 kW
            number of feeds: 120
            longitudinal feed range: 0,04 - 12 mm/r
            cross feed range: 0,02 - 6 mm/r
            number of threads:
            metric thread range (64): 0,5 - 120 mm
            inch thread rangel (64): 60 - 1/4 Tpi
            module thread range (64): 0,125 - 30
            DP thread range (64): 240 - 1
            cross slide travel: 315 mm
            top slide travel: 130 mm
            tailstock quill diameter: 90 mm
            tailstock quill taper: MK 5
            tailstock travel: 230 mm
            weight approx.: 3.310 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 500 M


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1489 · Center Lathe

          ZMM - CU 500 M - - -

          Technical details
          250 mm︱ 500 mm︱ 300 mm︱ 700 mm︱ 400 mm︱ 1.500 mm︱ . 8 Nr︱ 72 mm︱ 80 M︱ 7,5/11 kW︱ 315 mm︱ 130 mm︱ 90 mm︱ 5 MK︱ 230 mm︱ 2.950 kg︱
          driven by manual transmission 3-axes digital readout quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.000 mm € 31.100,- turning length 2.000 mm € 33.240,- turning length 3.000 mm € 36.820,- turning length 4.000 mm € 40.960,- turning length 5.000 mm € 51.560,- centre height: 250 mm swing over bed: 500 mm swing over cross slide: 300 mm swing in gap: 700 mm width of bed: 400 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 8 spindlebore: 72 mm spindle taper: MT 80 spindle speeds (21): 20 - 2.000 rpm main motor power: 7,5/11 kW number of feeds: 120 longitudinal feed range: 0,04 - 12 mm/r cross feed range: 0,02 - 6 mm/r number of threads: metric thread range (64): 0,5 - 120 mm inch thread rangel (64): 60 - 1/4 Tpi module thread range (64): 0,125 - 30 DP thread range (64): 240 - 1 cross slide travel: 315 mm top slide travel: 130 mm tailstock quill diameter: 90 mm tailstock quill taper: MK 5 tailstock travel: 230 mm weight approx.: 2.950 kg
            250 mm
            500 mm
            300 mm
            700 mm
            400 mm
            1.500 mm
            . 8 Nr
            72 mm
            80 M
            7,5/11 kW
            315 mm
            130 mm
            90 mm
            5 MK
            230 mm
            2.950 kg
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            longitudinal stop for 1 position
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)

            Further turning lengths:


            turning length 1.000 mm € 31.100,- turning length 2.000 mm € 33.240,- turning length 3.000 mm € 36.820,- turning length 4.000 mm € 40.960,- turning length 5.000 mm € 51.560,-



            centre height: 250 mm
            swing over bed: 500 mm
            swing over cross slide: 300 mm
            swing in gap: 700 mm
            width of bed: 400 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 8
            spindlebore: 72 mm
            spindle taper: MT 80
            spindle speeds (21): 20 - 2.000 rpm
            main motor power: 7,5/11 kW
            number of feeds: 120
            longitudinal feed range: 0,04 - 12 mm/r
            cross feed range: 0,02 - 6 mm/r
            number of threads:
            metric thread range (64): 0,5 - 120 mm
            inch thread rangel (64): 60 - 1/4 Tpi
            module thread range (64): 0,125 - 30
            DP thread range (64): 240 - 1
            cross slide travel: 315 mm
            top slide travel: 130 mm
            tailstock quill diameter: 90 mm
            tailstock quill taper: MK 5
            tailstock travel: 230 mm
            weight approx.: 2.950 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM CU 1250


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1497 · Center Lathe

          ZMM - CU 1250 - - -

          Technical details
          625 mm︱ 1.320 mm︱ 940 mm︱ 1.500 mm︱ 700 mm︱ 1.500 mm︱ . 15 Nr︱ 155 mm︱ 160 M︱ 22/30 kW︱ 685 mm︱ 270 mm︱ 125 mm︱ 6 MK︱ 260 mm︱ 8.550 kg︱
          driven by manual transmission 3-axes digital readout quick change toolpost Amestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates tailstock quill reducer electric motor movement of tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) Further turning lengths: turning length 1.500 mm € 76.250,- turning length 3.000 mm € 82.040,- turning length 4.000 mm € 92.390,- turning length 5.000 mm € 97.510,- entre height: 625 mm swing over bed: 1.320 mm swing over cross slide: 940 mm swing in gap: 1.500 mm width of bed: 700 mm distance between centers: 1.500 mm spindle nose / DIN55027: No. 15 spindlebore: 155 mm spindle taper: M 160 spindle speeds (24): 5 - 1.000 rpm main motor power: 22/30 kW number of feeds: 160 longitudinal feed range: 0,032 - 38,9 mm/r cross feed range: 0,016 - 19,45 mm/r number of threads: metric thread range (80): 0,5 - 480 mm inch thread rangel (80): 60 - 1/16 Tpi module thread range (80): 0,125 - 120 DP thread range (80): 240 - 1/4 cross slide travel: 525 mm top slide travel: 270 mm tailstock quill diameter: 125 mm tailstock quill taper: MK 6 tailstock travel: 260 mm weight approx.: 8.550 kg
            625 mm
            1.320 mm
            940 mm
            1.500 mm
            700 mm
            1.500 mm
            . 15 Nr
            155 mm
            160 M
            22/30 kW
            685 mm
            270 mm
            125 mm
            6 MK
            260 mm
            8.550 kg
            Description :
            driven by manual transmission
            3-axes digital readout
            quick change toolpost Amestra with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 500 mm
            spindle dead center
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            tailstock quill reducer
            electric motor movement of tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"
            (sample photo)
            Further turning lengths:


            turning length 1.500 mm € 76.250,- turning length 3.000 mm € 82.040,- turning length 4.000 mm € 92.390,- turning length 5.000 mm € 97.510,-

            entre height: 625 mm
            swing over bed: 1.320 mm
            swing over cross slide: 940 mm
            swing in gap: 1.500 mm
            width of bed: 700 mm
            distance between centers: 1.500 mm
            spindle nose / DIN55027: No. 15
            spindlebore: 155 mm
            spindle taper: M 160
            spindle speeds (24): 5 - 1.000 rpm
            main motor power: 22/30 kW
            number of feeds: 160
            longitudinal feed range: 0,032 - 38,9 mm/r
            cross feed range: 0,016 - 19,45 mm/r
            number of threads:
            metric thread range (80): 0,5 - 480 mm
            inch thread rangel (80): 60 - 1/16 Tpi
            module thread range (80): 0,125 - 120
            DP thread range (80): 240 - 1/4
            cross slide travel: 525 mm
            top slide travel: 270 mm
            tailstock quill diameter: 125 mm
            tailstock quill taper: MK 6
            tailstock travel: 260 mm
            weight approx.: 8.550 kg
          Datasheet
          Request / Contact
          used  Center Lathe ZMM C 11 MT


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-1397 · Center Lathe

          ZMM - C 11 MT - - -

          Technical details
          300 mm︱ 600 mm︱ 400 mm︱ 800 mm︱ 400 mm︱ 2.000 mm︱ . 8 Nr︱ 80 mm︱ 90 M︱ 7,5 kW︱ 315 mm︱ 130 mm︱ 90 mm︱ 5 MK︱ 230 mm︱ 3.100 kg︱
          driven by conventional gearbox 3-axes digital readout Fagor 40i quick change toolpost Amestra Multisuisse type C with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center four way rapid traverse device electromagnetic brake longitudinal stop for 1 position following rest 20 - 200 mm with sliders steady rest 20 - 200 mm with rolls  coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" (sample photo) centre height: 300 mm swing over bed: 600 mm swing over cross slide: 400 mm swing in gap: 800 mm width of bed: 400 mm distance between centers: 2.000 mm spindle nose / DIN55027: No. 8 spindlebore: 80 mm spindle taper: M 90 spindle speeds (16): 11,5 - 2.000 rpm main motor power: 7,5 kW number of feeds: 160 longitudinal feed range: 0,02 - 12 mm/r cross feed range: 0,01 - 6 mm/r number of threads: metric thread range (80): 0,25 - 120 mm inch thread rangel (80): 120 - 1/4 Tpi module thread range (80): 0,0625 - 30 DP thread range (80): 480 - 1 cross slide travel: 315 mm top slide travel: 130 mm tailstock quill diameter: 90 mm tailstock quill taper: MK 5 tailstock travel: 230 mm weight approx.: 3.100 kg
            300 mm
            600 mm
            400 mm
            800 mm
            400 mm
            2.000 mm
            . 8 Nr
            80 mm
            90 M
            7,5 kW
            315 mm
            130 mm
            90 mm
            5 MK
            230 mm
            3.100 kg
            Description :
            driven by conventional gearbox
            3-axes digital readout Fagor 40i
            quick change toolpost Amestra Multisuisse type C with 4 holders (3 square, 1 round)
            3-jaw chuck Bison 3204/DIN6350, Ø 250 mm
            spindle dead center
            four way rapid traverse device
            electromagnetic brake
            longitudinal stop for 1 position
            following rest 20 - 200 mm with sliders
            steady rest 20 - 200 mm with rolls 
            coolant equipment
            full length rear splash guard
            leadscrew and shaft protection
            safety guard for the chuck
            toolholder guard
            levelling bolts and plates
            quick release tailstock
            low voltage machine lamp
            operating manual
            machine according to "CE"

            (sample photo)




            centre height: 300 mm
            swing over bed: 600 mm
            swing over cross slide: 400 mm
            swing in gap: 800 mm
            width of bed: 400 mm
            distance between centers: 2.000 mm
            spindle nose / DIN55027: No. 8
            spindlebore: 80 mm
            spindle taper: M 90
            spindle speeds (16): 11,5 - 2.000 rpm
            main motor power: 7,5 kW
            number of feeds: 160
            longitudinal feed range: 0,02 - 12 mm/r
            cross feed range: 0,01 - 6 mm/r
            number of threads:
            metric thread range (80): 0,25 - 120 mm
            inch thread rangel (80): 120 - 1/4 Tpi
            module thread range (80): 0,0625 - 30
            DP thread range (80): 480 - 1
            cross slide travel: 315 mm
            top slide travel: 130 mm
            tailstock quill diameter: 90 mm
            tailstock quill taper: MK 5
            tailstock travel: 230 mm
            weight approx.: 3.100 kg
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine ERLO SE 30


          • HESSE+CO Maschinenfabrik GesmbH
          • Straße 4 Objekt 8
          • 2351 Wiener Neudorf
          • Österreich

          • +43/2236/638 70-0
            +43/2236/636 62
          • office@hesse-maschinen.com
            https://www.hesse-maschinen.com
          #1069-3128 · Bench Drilling Machine

          ERLO - SE 30 - - -

          Technical details
          30 mm︱ 22 M︱ 1,1 / 1,4 kW︱ 3 MK︱ 270 x 270 mm︱ 800 x 600 x 1.450 mm︱ 240 kg︱
          ERLO  (MADE IN SPAIN) for manufacturing use Manual feed Gear driven Fixed base with t-slots, height adjustable and rotating headstock Lightning equipment Tool ejector Emergency push button Turning sense selector CE norms Options: Reverse for Tapping € 610,- (Sample photo) Drilling capacitiy steel: 30 mm Tapping capacity steel: M22 Speed range: 65 - 3.060 (8) Motor: 1,1 / 1,4 kW Spindle cone: MK 3 Table: 270 x 270 mm Length x width x height: 800 x 600 x 1.450 mm Weight: 240 kg
            30 mm
            22 M
            1,1 / 1,4 kW
            3 MK
            270 x 270 mm
            800 x 600 x 1.450 mm
            240 kg
            Description :
            ERLO  (MADE IN SPAIN)

            for manufacturing use

            Manual feed
            Gear driven
            Fixed base with t-slots, height adjustable and rotating headstock
            Lightning equipment
            Tool ejector
            Emergency push button
            Turning sense selector
            CE norms


            Options:
            Reverse for Tapping € 610,-

            (Sample photo)

            Drilling capacitiy steel: 30 mm
            Tapping capacity steel: M22
            Speed range: 65 - 3.060 (8)
            Motor: 1,1 / 1,4 kW
            Spindle cone: MK 3
            Table: 270 x 270 mm
            Length x width x height: 800 x 600 x 1.450 mm
            Weight: 240 kg
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd  2351 Wiener Neudorf Straße 4 Objekt 8  Österreich
          Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd

          Straße 4 Objekt 8



          Contact Trader


            Hesse+co Maschinenfabrik Gesmbh Industriezentrum Nö-Süd
           Straße 4 Objekt 8
            2351 Wiener Neudorf
            Österreich
            +43/2236/638 70-0
            +43/2236/636 62
            office@hesse-maschinen.com
            https://www.hesse-maschinen.com
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Absaugung · Abwickelhaspel · Alu-Kreissäge · Anbiegemaschine · Ausklinkmaschine · Bandschleifmaschine · Bandsäge - horizontal · Biegemaschine horizontal · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Bohr- und Fräsmaschine · Bügelsäge · Bördelmaschine · CNC Plasma-Schneidanlage · Doppelschleifbock · Doppelständerexzenterpresse · Doppelständerpresse - Hydraulisch · Dornrohrbiegemaschine · Einständer - Richtpresse · Einständerpresse - Hydraulisch · Einständerziehpresse - Hydraulisch · Exzenterpressen - Einständer · Falzformer · Flachschleifmaschine · Fräsmaschine - Universal · Horizontal - Bandsägeautomat · Hydraulische Lochstanze · Kaltkreissäge · Kreisschere · Kreuztisch · Laserschneidmaschine · Lochstanze · Lochstanzen · Längs- und Querteilanlage · Mechanische - Abkantpresse · Profilstahlschere · Radialbohrmaschine · Ring- Profil- Biegemaschine · Rohrausschleifer · Rohrbiegemaschine · Schwenkbiegemaschine · Sickenmaschine · Spitzendrehmaschine · Stanz- und Nibbelmaschine · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Tischbohrmaschine · Topfschleifmaschine · Viersäulenpresse - Hydraulisch · Vorschubapparat · Wasserstrahlschneidanlage · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal ·