turning diameter 250 (Stange 65) mm︱turning length 710 mm︱control C200-4 ︱total power requirement 40 kW︱weight of the machine ca. 7,3 t︱dimensions of the machine ca. 4,0 x 2,1 x 2,1 m︱

---

CNC turning and milling center with 2 spindles and Y and B axis on turret I Main Spindle: Bar diameter: 65 mm Speed max.: 5.000 U/min C-axis: resolution 0,001 degree Sub Spindel: Bar diameter: 65 mm Speed max.: 5.000 U/min Longitudinal travel: 770 mm Rapid traverse: 22,5 m/min C-axis: resolution 0,001 degree Tool Carrier: 2 of turrets with 12 tool stations, all driven, max. speed=6.000 rpm Upper Turret I: 4 axis X, Z, Y, B travel distance rapid traverse X-axis: 215 mm 20 m/min Z-axis: 950 mm 30 m/min Y-axis: 180 mm 7,5 m/min B-axis: Swivel angle 360° / division step 5° with indexing Resolution 0,001° with clamping, Swivel time for 180°=1 sec Upper Turret II: 2 axis X and Z travel distance rapid traverse X-axis: 140 mm 20 m/min Z-axis: 705 mm 30 m/min 2 off SMW 260 power chucks, lot off driven and static tools

turning diameter 200 mm︱swing diameter 250 mm︱turning height 240 mm︱CNC control SINUMERIK 840D ︱rapid traverse X-axis 60 m/min︱rapid traverse Z-axis 30 m/min︱turning speed range - spindle 6.000 U/min︱Drive power (40 / 100 % DC) 48 / 31 kW︱diameter of main spindle in front bearing 100 mm︱spindle nose size according to DIN 55027 A6 ︱c-axis (C1+C2) 0,001 °︱number of tool positions 2 x 12 ︱number of rotary tool positions 2 x 12 ︱tool holder according to VDI 3425, shaft dia. 40 mm︱max. tool length 175 mm︱total power requirement 70 kW︱weight of the machine ca. 12,5 t︱dimensions of the machine ca. 7,00x4,1x3,3 m︱

---

DVT250L is a latest design 2-spindle (1 x top / 1 x bottom) vertical lathe. Instead of two machines linked by automation and turning station you need just one DVT to machine workpieces from two sides with the highest precision. Automatic loading of the machine through the suspended spindle and machining in a closed workspace provide the basis. The direct operation into the clamping device of the fixed spindle after machining takes place without loss of quality between the two clampings. Parallel to the machining of the second side the loading of the suspended spindle takes place again and the machining continues. Unloading of the fixed spindle is managed through a separate gripper. The finished part is removed by an integrated automation so that raw and finished parts are clearly separated for the operator. Highlights: * Linear magnetic drive in the X-axis rapid traverse of 60 m / min * Direct linear measuring systems (resolution 0,001 mm) in the X-axis with sealing air * Highly dynamic motor spindles with 28 - 36 kW of power (100% - 40% duty cycle) * Bearing inner diameter 100 mm * Spindle speed up to 5,500 r / min * Max Torque 348 Nm * 2 of LARU-VDI 40 tool turrets with 12 driven tools * Turret rotation time (1 pos - 90° - 180°) = 1,2 - 2,2 - 2,3 sec * Drive power of driven tools 10.3 kW at 25% duty cycle * Max Speed of the driven tools 4,500 r / min * integrated loading and unloading of the workpieces * Cooling unit for both motor spindles and linear motor 24KWh * Coolant cleaning system with capacity of 950 l/min * High-pressure pumps p=20 bar

turning diameter 300 mm︱swing diameter 400 mm︱CNC control SINUMERIK 840D ︱turning height 340 mm︱rapid traverse X-axis 32 m/min︱rapid traverse Z-axis 20 m/min︱turning speed range - spindle 5.000 U/min︱Drive power (40 / 100 % DC) 43 / 27 kW︱diameter of main spindle in front bearing 130 mm︱spindle nose size A8 - DIN 55026 ︱number of tool positions 2 x 12 ︱tool holder according to VDI 3425, shaft dia. 40 mm︱max. tool length 220 mm︱total power requirement 110 kW︱weight of the machine ca. 15,0 t︱dimensions of the machine ca. 7,0x4,1x3,3 m︱

---

DVT300L is a 2-spindle (1 x top / 1 x bottom) vertical lathe in unique "HESSAPP" design with linear motor in the X-axis for rapid traverse up to 32 m / min A loading of the machine by the top spindle and the direct transfer after processing of the first side in the power chuck of the stationary spindle is carried out without loss of quality between the two clampings. The discharging of finished parts is done by separate part gripper. Machine was used for dry machining of car flywheels. Coolant tank and chip conveyor can be delivered on request. Existing roller conveyors can also be adjusted. There are 3 of identical machines available. -CNC control SINUMERIK 840D -Clamping device spindle 1 (top) power chuck BERG KV 400-3 Baking -Clamping tool spindle 2 (bottom) power chuck BERG 400-6 Baking down chuck -2 x tool turret LARU-LANG 12 x VDI40 -2 x motor spindle Hessapp 27 kW (100% duty cycle), max. 5000 rpm

turning diameter 300 mm︱swing diameter 320 mm︱turning height 250 mm︱CNC control SINUMERIK 840C ︱rapid traverse X-axis 40 m/min︱rapid traverse Z-axis 24 m/min︱turning speed range - spindle 28 - 7.000 U/min︱Drive power (40 / 100 % DC) 40 / 31 kW︱spindle nose size 220 mm / DIN 6353 ︱number of tool positions 2 x 8 pos. ︱tool holder according to VDI 3425, shaft dia. 40 mm︱max. tool length 220 mm︱total power requirement 110 kW︱weight of the machine ca. 12,0 t︱dimensions of the machine ca. 7,0 x 3,0 x 3,1 m︱

---

PITTLER PV SL1 / 2-2 is a 2-spindle vertical turning machine with integrated workpiece-turn and pick-up self-loading device, maximum chuck size up to 315 mm. Machine was used for the machining of car wheel hubs.

x-travel 1400 mm︱y-travel 700 mm︱z-travel 840 mm︱b-axis (rotary table) 0,001 °︱control HEIDENHAIN TNC415 ︱Table dimensions 900 x 600 mm︱table load capacity 2000 kp︱spindle taper ISO SK40 ︱turning speed range - spindle 15 - 3800 U/min︱feed range 1 - 2000 mm/min︱rapid traverse (X, Y, Z) 10/10/8 m/min︱Motor output 10 kW︱total power requirement 22,5 kW︱weight of the machine ca. 10,0 t︱dimensions of the machine ca. 4,4 x 4,0 x 2,7 m︱universal milling head, manually adjustable Horizontal+Vertikal ︱measuring touch probe HEIDENHAIN TS120 ︱tool tapers 20 Stück︱

---

CNC universal milling machine ALCERA GAMBIN 120C TECHNICAL FEATURES: * XYZ-1400 x 700 x 840 mm * CNC HEIDENHAIN TNC415 (software for 3D milling) * NC rotary table 900 x 600 mm (interference circle Ø1150 mm) * Universal milling head (horizontal-vertical) ACCESSORIES: * touch probe Heidenhain TS120 * various tool holders SK40 * 2 pcs precision vices * Various clamping devices * Manuals

grinding diameter max. 600 mm︱regulating wheel width 600 mm︱max. width of grinding wheel 600 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Spindle set consisting of spindle shafts for mounting of grinding and also regulating wheels suitable for a LIDKOEPING CL 660. A number of sets are available.

grinding length 1250 mm︱grinding width 500 mm︱workpiece height 650 mm︱CNC control Sinumerik 840 D ︱Table dimensions 1250 x 500 mm︱longitudinal stroke 1250 mm︱vertical movement of grinding slide 650 mm︱cross movement of grinding slide 505 mm︱Distance table / spindle centre (horizontal pos.) 800 mm︱grinding motor 50 kW︱grinding wheel dia. x width 400 x 160 mm︱peripheral speed 45 m/sec︱feed range (X /Y/ Z) 30 / 3 / 3 mm/min︱min. input value 0,001 mm︱rotary dressing tool, table mounted type ︱dimensions of rotary dressing tools ø150 x 167 mm︱Bore diameter ø 52 mm︱turning speed range 400 - 6000 U/min︱balancing device Dittel MBA 5000 ︱total power requirement 82 kVA︱

---

*mechanical and electrical retrofit in 2020 *1 year warranty *table dressing device MT150 x 167 mm (optional W=217 or W=237 mm) with servo motor (S2) *POLO coolant system 4000 l with Hyfra immersion cooler *NC-controlled water nozzle *SARA suction *DITTEL M5000 dynamic balancing system *new magnetic plate WAGNER 1.000 x 500 mm

grinding length 1250 mm︱grinding width 350 mm︱workpiece height 450 mm︱CNC control Sinumerik 840D ︱rotary table dia. 1200 mm︱Table dimensions 2 x (760 x 325) mm︱longitudinal stroke 800 mm︱vertical movement of grinding slide 450 mm︱cross movement of grinding slide 350 mm︱Distance table / spindle centre (horizontal pos.) 600 mm︱grinding motor 50 kW︱grinding wheel size 400 x 160 mm︱feed range (X /Y/ Z) 30 / 3 / 3 m/min︱min. input value 0,001 mm︱turning speed range 200 - 4000 U/min︱total power requirement 82 kVA︱weight of the machine ca. 16 t︱dimensions of the machine ca. 7,00 x 3,30 x 3,00 m︱

---

Machine is sold as partially overhauled! MAEGERLE MGC Series are famous about various unique features: -Smooth slow and fast column motion and accurate positioning -Thermal stability by hydrostatic return oil circuit through machine base -Super precision -High stiffness and rigidity -Main spindle motor KESSLER 50kW. Our MGC is equipped with 180° swivel table diameter 1200 mm(FIBRO) and travelling column. The reason is to be able to make parts handling during the grinding operation. Accessories: Table dressing device, KNOLL HF 500/4000 water filtering unit with high pressure pump

cutting diameter 420 mm︱saw band length 41 x 5600 mm︱cutting width 1,3 mm︱Control Simatic S7 Touch ︱band speed 17 - 110 m/min︱sawing motor 7,5 kW︱diameter of round bars 420 x 3000 mm︱diameter of round bars 300 x 6000 mm︱total power requirement 30 kW︱weight of the machine ca. 18,5 t︱dimensions of the machine ca. 12,5 x 5,0 x 2,5 m︱

---

CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

table length 700 mm︱table width 500 mm︱ampere 60 A︱x-axis 350 mm︱y-axis 250 mm︱z-axis 350 mm︱CNC control Mitsubishi Dialog 32 bit ︱electrode holder EROWA ︱electrode changer 3 pos︱electrode weight 75 kg︱max. workpiece weight 500 kg︱work tank size mm︱rapid traverse (X, Y, Z) 5000 mm/min︱dielektrikum level max. over work surface mm︱total power requirement kVA︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 1,87 x 2,02 x 2,2 m︱

---

CNC control Mitsubishi Dialog 32 bit. Good general condition. Not ready for operation. Power supply transformer missing! Machine is offered as defective and incomplete!

diameter 140 mm︱width 24 mm︱internal diameter 90 mm︱

---