European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          ProdEq Trading GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe GRAZIANO SAG 14


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41619 · Center Lathe

          GRAZIANO - SAG 14 - - 1973 -

          Technical details
          WORKING RANGE TURNING ︱- swing diameter (max) 320 mm︱- turning diameter (max) 150 mm︱- worpiece length max. 750 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 38 /min︱- spindle revolutions (max) 2000 /min︱
          Equipment: - 3 jaw chucks - Div. steel holder - div. turning steels - some turning inserts Disassambly and Loading Cost: 400 EUR The machine is still needed in production until the end of 2021, therefore the machine can not be delivered before beginning of January 2022.
            - swing diameter (max) 320 mm
            - turning diameter (max) 150 mm
            - worpiece length max. 750 mm
            - spindle revolutions (min) 38 /min
            - spindle revolutions (max) 2000 /min
            Description :
            Equipment:
            - 3 jaw chucks
            - Div. steel holder
            - div. turning steels
            - some turning inserts

            Disassambly and Loading Cost: 400 EUR

            The machine is still needed in production until the end of 2021,
            therefore the machine can not be delivered before beginning of January 2022.
          Datasheet
          Request / Contact
          used  Center Lathe SCHAUBLIN 102 N


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41611 · Center Lathe

          SCHAUBLIN - 102 N - - 1965 -

          Technical details
          WORKING RANGE TURNING ︱- turning diameter (max) 200 mm︱TAILSTOCK ︱- distance betw. centers (max) 450 mm︱- sleeve stroke 80 mm︱- sleeve diameter 30 mm︱- taper: MK 2 ︱DIMENSIONS / WEIGHTS ︱- space requirements -left/right- 1390 mm︱- space requirements -front/back- 550 mm︱- total height 1240 mm︱- total weight approx. 550 kg︱
          including: + Collets + Three-jaw chuck + tool holder + Tailstock Disassembly and loading costs: 250 EUR
            - turning diameter (max) 200 mm
            - distance betw. centers (max) 450 mm
            - sleeve stroke 80 mm
            - sleeve diameter 30 mm
            - taper: MK 2
            - space requirements -left/right. 1390 mm
            - space requirements -front/back. 550 mm
            - total height 1240 mm
            - total weight approx. 550 kg
            Description :
            including:
            + Collets
            + Three-jaw chuck
            + tool holder
            + Tailstock

            Disassembly and loading costs: 250 EUR
          Datasheet
          Request / Contact

          Chucking Automatic Lathe - Multi Spindle

          used  Chucking Automatic Lathe - Multi Spindle HK-CON L3²SDZ-12


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41893 · Chucking Automatic Lathe - Multi Spindle

          HK-CON - L3²SDZ-12 - - 2018 - SIEMENS 840 D SL

          Technical details
          BASIC FUNCTIONS ︱- design principle: front bed ︱- number of spindles 6 ︱- number of x/z slides 3 ︱- spdl. indexing device: yes ︱- live positions: yes ︱- number of c-axes 6 ︱WORKING RANGE TURNING ︱- turning diameter (max) 125 mm︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 100 kW︱DIMENSIONS / WEIGHTS ︱- total weight approx. 23000 kg︱
          6-spindle transfer lathe as double spindle machine for chuck turned parts with 3 operations and 2 direct transfers. With 2 turning spindles arranged one above the other per operation, 2 workpieces are machined simultaneously. The transfer of the parts between the 3 tool blocks is fully automated and by direct transfers without releasing the workpiece. Thus, a total of 6 spindles are always engaged at the same time. The scope includes: - Robot KUKA KR6 R900 sixx - blowing station - Measuring station - Marking laser Trumpf TruMark 5000 - infeed and outfeed belts
            - design principle: front bed
            - number of spindles 6
            - number of x/z slides 3
            - spdl. indexing device: yes
            - live positions: yes
            - number of c-axes 6
            - turning diameter (max) 125 mm
            - total power consumption 100 kW
            - total weight approx. 23000 kg
            Description :
            6-spindle transfer lathe as double spindle machine for chuck turned parts
            with 3 operations and 2 direct transfers.
            With 2 turning spindles arranged one above the other per operation, 2 workpieces are machined simultaneously.
            The transfer of the parts between the 3 tool blocks is fully automated
            and by direct transfers without releasing the workpiece.

            Thus, a total of 6 spindles are always engaged at the same time.

            The scope includes:
            - Robot KUKA KR6 R900 sixx
            - blowing station
            - Measuring station
            - Marking laser Trumpf TruMark 5000
            - infeed and outfeed belts
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe CONTUR MSL-500


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-38370 · CNC Lathe

          CONTUR - MSL-500 - - 2017 - HEIDENHAIN CNC PILOT 640

          Technical details
          turning diameter mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: inclined bed ︱- number of spindles 1 ︱- number of x/z slides 1 ︱- number of turrets 1 ︱- live positions: no ︱WORKING RANGE TURNING ︱- turning diameter (max) 370 mm︱- bar diameter (max) 74 mm︱- worpiece length max. 700 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 10 /min︱- spindle revolutions (max) 3500 /min︱- drive power S6 40% 27 kW︱X/Z SLIDE ︱- tool fixture: Turret
            - design principle: inclined bed
            - number of spindles 1
            - number of x/z slides 1
            - number of turrets 1
            - live positions: no
            - turning diameter (max) 370 mm
            - bar diameter (max) 74 mm
            - worpiece length max. 700 mm
            - spindle revolutions (min) 10 /min
            - spindle revolutions (max) 3500 /min
            - drive power S6 40% 27 kW
            - tool fixture: Turret
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center HWACHEON HI-TECH 850 MC


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41340 · CNC Turning- and Milling Center

          HWACHEON - HI-TECH 850 MC - - 2018 - FANUC

          Technical details
          turning diameter 750 mm︱turning length 2500 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 1 ︱- number of y-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 750 mm︱- bar diameter (max) 164 mm︱- worpiece length max. 2500 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 1500 /min︱- number of gears 4 ︱- drive power 45 kW︱- spindle torque 6873 Nm︱- spindle bore diameter 164 mm︱
          Spindelhoures 2100h (TOP CONDITION) Equipment: - incl. all tool holders as well as... - 5x radial, 5x axial, 1x swiveling +/-90°. - Boring bar holder 3x ø80mm - inkl. jack Ø 500mm - Software for tool wear - Belt filter system (including additional tank) - 2-stage high pressure pump (10/30 bar) - Glass ruler in BMT 85 - Support for automatic bezel - BMT 85 tool turret
            turning diameter 750 mm
            turning length 2500 mm
            - number of spindles 1
            - number of turrets 1
            - live positions: yes
            - number of c-axes 1
            - number of y-axes 1
            - turning diameter (max) 750 mm
            - bar diameter (max) 164 mm
            - worpiece length max. 2500 mm
            - spindle revolutions (max) 1500 /min
            - number of gears 4
            - drive power 45 kW
            - spindle torque 6873 Nm
            - spindle bore diameter 164 mm
            Description :
            Spindelhoures 2100h (TOP CONDITION)

            Equipment:
            - incl. all tool holders as well as...
            - 5x radial, 5x axial, 1x swiveling +/-90°.
            - Boring bar holder 3x ø80mm
            - inkl. jack Ø 500mm
            - Software for tool wear
            - Belt filter system (including additional tank)
            - 2-stage high pressure pump (10/30 bar)
            - Glass ruler in BMT 85
            - Support for automatic bezel
            - BMT 85 tool turret
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center ANGELINI ZENIT


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42486 · CNC Turning- and Milling Center

          ANGELINI - ZENIT - - 2008 - FANUC 180 I-TB

          Technical details
          turning diameter mm︱turning length mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: inclined bed ︱- number of spindles 2 ︱- number of turrets 2 ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 1 ︱WORKING RANGE TURNING ︱- bar diameter (max) 65 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 4500 /min︱COUNTER SPINDLE ︱- spindle revolutions (max) 6000 /min︱ELECTRICAL SPECIFICATIONS ︱- total power consumption 35 kW︱- mains voltage 400 V︱
            turning diameter mm
            turning length mm
            - design principle: inclined bed
            - number of spindles 2
            - number of turrets 2
            - live positions: yes
            - number of c-axes 2
            - number of y-axes 1
            - bar diameter (max) 65 mm
            - spindle revolutions (max) 4500 /min
            - spindle revolutions (max) 6000 /min
            - total power consumption 35 kW
            - mains voltage 400 V
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center HARDING QUEST 8/51SP HYDRO


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42497 · CNC Turning- and Milling Center

          HARDING - QUEST 8/51SP HYDRO - - 2005 - GE FANUC SERIES 18I-T

          Technical details
          turning diameter 315 mm︱turning length 520 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: inclined bed ︱- number of spindles 1 ︱- number of turrets 1 ︱- live positions: yes ︱- number of c-axes 1 ︱- number of y-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 315 mm︱- bar diameter (max) 51 mm︱- worpiece length max. 520 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 6000 /min︱X/Z SLIDE ︱- traverse velocity Y (min) 50 mm/min︱- traverse velocity Y (max) -30 mm/min︱
            turning diameter 315 mm
            turning length 520 mm
            - design principle: inclined bed
            - number of spindles 1
            - number of turrets 1
            - live positions: yes
            - number of c-axes 1
            - number of y-axes 1
            - turning diameter (max) 315 mm
            - bar diameter (max) 51 mm
            - worpiece length max. 520 mm
            - spindle revolutions (min) 6000 /min
            - traverse velocity Y (min) 50 mm/min
            - traverse velocity Y (max) -30 mm/min
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center INDEX G 300


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42462 · CNC Turning- and Milling Center

          INDEX - G 300 - - 1997 - INDEX C 200

          Technical details
          turning diameter 240 mm︱turning length 710 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: inclined bed ︱- number of spindles 2 ︱- number of turrets 2 ︱- live positions: yes ︱- number of c-axes 2 ︱- number of y-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 240 mm︱- worpiece length max. 710 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 5000 /min︱- drive power S6 40% 57 kW︱- drive power S1 100% 43 kW︱- c-axis: yes ︱COUNTER SPINDLE
          Equipment: - 2 Hainbuch chucks - various tool holders (VDI 30) - parts conveyor belt - LNS short bar loader
            turning diameter 240 mm
            turning length 710 mm
            - design principle: inclined bed
            - number of spindles 2
            - number of turrets 2
            - live positions: yes
            - number of c-axes 2
            - number of y-axes 1
            - turning diameter (max) 240 mm
            - worpiece length max. 710 mm
            - spindle revolutions (max) 5000 /min
            - drive power S6 40% 57 kW
            - drive power S1 100% 43 kW
            - c-axis: yes
            Description :
            Equipment:
            - 2 Hainbuch chucks
            - various tool holders (VDI 30)
            - parts conveyor belt
            - LNS short bar loader
          Datasheet
          Request / Contact

          CNC-Vertical Turret Lathe - Single Col.

          used  CNC-Vertical Turret Lathe - Single Col. PIETRO CARNAGHI ATF 16 TM/S


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-36328 · CNC-Vertical Turret Lathe - Single Col.

          PIETRO - CARNAGHI ATF 16 TM/S - - 1995 - SIEMENS 840 C

          Technical details
          faceplate diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- live positions: yes ︱- number of c-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 1600 mm︱- worpiece length max. 1100 mm︱- workpiece weight max. 3000 kg︱FACING PLATE (TURNING MACHINE) ︱- diameter of surface plate 1000 mm︱- spindle revolutions (min) 10 /min︱- spindle revolutions (max) 800 /min︱- drive power 60 kW︱- c-axis: yes ︱CROSS BEAM SLIDE ︱- Z-axis travel 1000 mm︱- X-axis travel 1010 mm︱
          VTL with milling and grinding attachments. Boring and milling heads: 1 pc horizontal milling head with KM63 tool fixture 1 pc vertical milling head with KM63 tool fixture 1 pc angular milling head with KM40 tool fixture Grinding Spindles: 1 pc grinding spindle 220 mm dia 4 pc electro-spindles 4.5 kW, 8 kW, 16 kW, 20 kW ? partially with extensions Other attachments: 1 pc RENISHAW P10 probe 1 pc circular aligning unit with gallows 2 fold pallet system (however with one chuck only) 1 pc balancing and probing system 1 pc dressing unit 1 pc band filter 1 pc chip conveyor 1 pc electrostatic aspiration system Approx. 100 KM63 tool components, fixtures and monoblock turning tools among them 5 pc holders for internal turning 26 pc cylindrical holders 1 pc threading chuck 1 pc 4-jaw chuck Approx. 15 sets clamping jaws (4 jaws per set), among them soft, hard, aluminium, claw type
            - live positions: yes
            - number of c-axes 1
            - turning diameter (max) 1600 mm
            - worpiece length max. 1100 mm
            - workpiece weight max. 3000 kg
            - diameter of surface plate 1000 mm
            - spindle revolutions (min) 10 /min
            - spindle revolutions (max) 800 /min
            - drive power 60 kW
            - c-axis: yes
            - Z-axis travel 1000 mm
            - X-axis travel 1010 mm
            Description :
            VTL with milling and grinding attachments.

            Boring and milling heads:
            1 pc horizontal milling head with KM63 tool fixture
            1 pc vertical milling head with KM63 tool fixture
            1 pc angular milling head with KM40 tool fixture

            Grinding Spindles:
            1 pc grinding spindle 220 mm dia
            4 pc electro-spindles 4.5 kW, 8 kW, 16 kW, 20 kW ? partially with extensions

            Other attachments:
            1 pc RENISHAW P10 probe
            1 pc circular aligning unit with gallows
            2 fold pallet system (however with one chuck only)
            1 pc balancing and probing system
            1 pc dressing unit
            1 pc band filter
            1 pc chip conveyor
            1 pc electrostatic aspiration system
            Approx. 100 KM63 tool components, fixtures and monoblock turning tools
            among them 5 pc holders for internal turning
            26 pc cylindrical holders
            1 pc threading chuck
            1 pc 4-jaw chuck
            Approx. 15 sets clamping jaws (4 jaws per set),
            among them soft, hard, aluminium, claw type

          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled BOEHRINGER DUS 560/1000


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-39705 · Lathe - cycle-controlled

          BOEHRINGER - DUS 560/1000 - - 1997 - KELLER CNCPLUS

          Technical details
          turning diameter 365 mm︱turning length 1000 mm︱control ︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of x/z slides 1 ︱- live positions: no ︱WORKING RANGE TURNING ︱- swing diameter (max) 570 mm︱- turning diameter (max) 365 mm︱- worpiece length max. 1000 mm︱MAIN SPINDLE ︱- spindle revolutions (min) 3 /min︱- spindle revolutions (max) 2500 /min︱- number of gears 2 ︱- spindle diameter 62 mm︱X/Z SLIDE ︱- traverse velocity Z (min) 0 mm/min︱- traverse velocity Z (max) 10000 mm/min︱- traverse velocity X (min) 0 mm/min︱
          - monitor screen defect, otherwise fully functional Note: Machine to be added for auction Rockwell Automation Switzerland GmbH. Machine is located at 78234 Engen, Germany.
            turning diameter 365 mm
            turning length 1000 mm
            - number of x/z slides 1
            - live positions: no
            - swing diameter (max) 570 mm
            - turning diameter (max) 365 mm
            - worpiece length max. 1000 mm
            - spindle revolutions (min) 3 /min
            - spindle revolutions (max) 2500 /min
            - number of gears 2
            - spindle diameter 62 mm
            - traverse velocity Z (min) 0 mm/min
            - traverse velocity Z (max) 10000 mm/min
            - traverse velocity X (min) 0 mm/min
            Description :
            - monitor screen defect, otherwise fully functional

            Note: Machine to be added for auction Rockwell Automation Switzerland GmbH.
            Machine is located at 78234 Engen, Germany.
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine RASOMA DZS 125-2


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41914 · Vertical Turning Machine

          RASOMA - DZS 125-2 - - 2018 - SIEMENS 840 D SL

          Technical details
          turning diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- design principle: vertical spindle ︱- number of spindles 2 ︱- number of x/z slides 2 ︱- number of turrets 2 ︱- live positions: no ︱- number of c-axes 2 ︱WORKING RANGE TURNING ︱- turning diameter (max) 125 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 6000 /min︱- drive power S6 40% 31 kW︱- drive power S1 100% 25.8 kW︱- spindle torque S1 100% 60 Nm︱X/Z SLIDE ︱- Z-axis travel 300 mm︱
          Vertical - two spindle turning center with pick-up spindle equipped with: - Raw parts conveyor - turning station in the machine room - measuring station - Finished parts conveyor
            - design principle: vertical spi.
            - number of spindles 2
            - number of x/z slides 2
            - number of turrets 2
            - live positions: no
            - number of c-axes 2
            - turning diameter (max) 125 mm
            - spindle revolutions (max) 6000 /min
            - drive power S6 40% 31 kW
            - drive power S1 100% 25.8 kW
            - spindle torque S1 100% 60 Nm
            - Z-axis travel 300 mm
            Description :
            Vertical - two spindle turning center with pick-up spindle
            equipped with:
            - Raw parts conveyor
            - turning station in the machine room
            - measuring station
            - Finished parts conveyor
          Datasheet
          Request / Contact
          used  Vertical Turning Machine RASOMA DZS 125-2


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41898 · Vertical Turning Machine

          RASOMA - DZS 125-2 - - 2016 - SIEMENS 840 D SL

          Technical details
          turning diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 2 ︱- number of turrets 2 ︱- live positions: yes ︱WORKING RANGE TURNING ︱- turning diameter (max) 125 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 6000 /min︱- drive power S6 40% 31 kW︱- drive power S1 100% 25.8 kW︱- spindle torque S1 100% 60 Nm︱X/Z SLIDE ︱- Z-axis travel 300 mm︱- X-axis travel 1150 mm︱- rapid traverse Z 30000 mm/min︱- rapid traverse X 100000 mm/min︱
          Vertical - two spindle turning center with pick-up spindle equipped with: - Raw parts conveyor - turning station in the machine room - measuring station - Finished parts conveyor
            - number of spindles 2
            - number of turrets 2
            - live positions: yes
            - turning diameter (max) 125 mm
            - spindle revolutions (max) 6000 /min
            - drive power S6 40% 31 kW
            - drive power S1 100% 25.8 kW
            - spindle torque S1 100% 60 Nm
            - Z-axis travel 300 mm
            - X-axis travel 1150 mm
            - rapid traverse Z 30000 mm/min
            - rapid traverse X 100000 mm/min
            Description :
            Vertical - two spindle turning center with pick-up spindle
            equipped with:
            - Raw parts conveyor
            - turning station in the machine room
            - measuring station
            - Finished parts conveyor
          Datasheet
          Request / Contact
          used  Vertical Turning Machine INDEX V 200


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42032 · Vertical Turning Machine

          INDEX - V 200 - - 1998 - INDEX C200-4

          Technical details
          turning diameter mm︱swing diameter mm︱turning height mm︱-------------------------------------------------- ︱BASIC FUNCTIONS ︱- number of spindles 1 ︱- number of turrets 1 ︱- number of c-axes 1 ︱WORKING RANGE TURNING ︱- turning diameter (max) 200 mm︱MAIN SPINDLE ︱- spindle revolutions (max) 5000 /min︱- c-axis: yes ︱X/Z SLIDE ︱- tool fixture: Turret ︱- - rotation speeds (max) 6000 /min︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱- mains frequency 50 Hz︱DIMENSIONS / WEIGHTS
            - number of spindles 1
            - number of turrets 1
            - number of c-axes 1
            - turning diameter (max) 200 mm
            - spindle revolutions (max) 5000 /min
            - c-axis: yes
            - tool fixture: Turret
            - - rotation speeds (max) 6000 /min
            - mains voltage 400 V
            - mains frequency 50 Hz
          Datasheet
          Request / Contact

          Bench Drilling Machine

          used  Bench Drilling Machine ACIERA 22 VA


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41586 · Bench Drilling Machine

          ACIERA - 22 VA - - 1968 -

          Technical details
          bore capacity in steel diameter 22 mm︱throat mm︱bore stroke mm︱-------------------------------------------------- ︱WORKING RANGE -BORING- ︱- drilling capacity full bore (steel) 22 mm︱
          Machine in very well maintained and good condition Equipment incl. threading device The machine is still needed in production until the end of 2021, therefore the machine can not be delivered before beginning of January 2022.
            bore capacity in steel diameter 22 mm
            throat mm
            bore stroke mm
            - drilling capacity full bore (s. 22 mm
            Description :
            Machine in very well maintained and good condition

            Equipment incl. threading device

            The machine is still needed in production until the end of 2021,
            therefore the machine can not be delivered before beginning of January 2022.
          Datasheet
          Request / Contact

          Jig Boring Machine

          used  Jig Boring Machine SIP 5000/7


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-34980 · Jig Boring Machine

          SIP - 5000/7 - - 2000 - FANUC

          Technical details
          TECHNICAL SPECIFICATION ︱- longitudinal travel 1600 mm︱- cross travel 1100 mm︱- vertical travel 1000 mm︱- Max. distance between spindle-table 720 mm︱- number of spindles 1 ︱- Tool holding fixture ISO SK 50 ︱- Spindle required power 15 kW︱- Spindle speed from 10 /min︱- .. to 6000 /min︱- feed velocity (min) 0 mm/min︱- feed velocity (max) 10000 mm/min︱- Advance vertical 0 mm/min︱- .. to 6000 mm/min︱- table surface (left-right) 1200 mm︱- table surface (front-back) 1700 mm︱- tool magazine: number of positions 130 ︱- coolant unit: yes ︱ELECTRICAL SPECIFICATIONS ︱- mains power supply 35 kVA︱
          Machine in excellent condition 3800 spindle hours
            - longitudinal travel 1600 mm
            - cross travel 1100 mm
            - vertical travel 1000 mm
            - Max. distance between spindle-. 720 mm
            - number of spindles 1
            - Tool holding fixture ISO SK 50
            - Spindle required . 15 kW
            - Spindle speed from 10 /min
            - .. to 6000 /min
            - feed velocity (min) 0 mm/min
            - feed velocity (max) 10000 mm/min
            - Advance vertical 0 mm/min
            - .. to 6000 mm/min
            - table surface (left-right) 1200 mm
            - table surface (front-back) 1700 mm
            - tool magazine: number of posit. 130
            - coolant unit: yes
            - mains power supply 35 kVA
            Description :
            Machine in excellent condition
            3800 spindle hours
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal DIXI DHP 80


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42119 · Machining Center - Horizontal

          DIXI - DHP 80 - - 2007 - FANUC MSX-711 III

          Technical details
          x travel 1200 mm︱y travel 1100 mm︱z travel 1100 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 4 ︱- .. among of them simultaneous CNC axes 4 ︱- X-axis travel 1200 mm︱- Y-axis travel 1100 mm︱- Z-axis travel 1100 mm︱TABLE ︱- table surface (front-back) 800 mm︱- clamping surface diameter 800 mm︱- workpiece load (max) 1500 kg︱MILLING SPINDLE / HEAD ︱- spindle revolutions (max) 12000 /min︱- spindle diameter 250 mm︱- tool fixture: ISO BT 50 ︱- drive power S1 100% 36 kW︱AXIS DRIVES
          Equipment: Chip conveyor ICS (internal coolant supply) 5-70 bar Coolant tank 1.465 l Coolant Spray Gun for swarf removal Working area flushing Cooling aggregate 8500 W
            x travel 1200 mm
            y travel 1100 mm
            z travel 1100 mm
            - number of processing axes (exc. 4
            - .. among of them simultaneous . 4
            - X-axis travel 1200 mm
            - Y-axis travel 1100 mm
            - Z-axis travel 1100 mm
            - table surface (front-back) 800 mm
            - clamping surface diameter 800 mm
            - workpiece load (max) 1500 kg
            - spindle revolutions (max) 12000 /min
            - spindle diameter 250 mm
            - tool fixture: ISO BT 50
            - drive power S1 100% 36 kW
            Description :
            Equipment:

            Chip conveyor
            ICS (internal coolant supply) 5-70 bar
            Coolant tank 1.465 l
            Coolant Spray Gun for swarf removal
            Working area flushing
            Cooling aggregate 8500 W
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal MCM CLOCK 600


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-40114 · Machining Center - Horizontal

          MCM - CLOCK 600 - - 1999 - SIEMENS

          Technical details
          x travel 600 mm︱y travel 600 mm︱z travel 700 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 4 ︱- X-axis travel 600 mm︱- Y-axis travel 600 mm︱- Z-axis travel 700 mm︱TABLE ︱- table surface (left-right) 500 mm︱MILLING SPINDLE / HEAD ︱- spindle revolutions (max) 20000 /min︱- tool fixture: HSK A63 ︱AXIS DRIVES ︱- rapid traverse X 50000 mm/min︱- rapid traverse Y 4000 mm/min︱- rapid traverse Z 50000 mm/min︱TOOL MAGAZINE ︱- magazin type: rack
            x travel 600 mm
            y travel 600 mm
            z travel 700 mm
            - number of processing axes (exc. 4
            - X-axis travel 600 mm
            - Y-axis travel 600 mm
            - Z-axis travel 700 mm
            - table surface (left-right) 500 mm
            - spindle revolutions (max) 20000 /min
            - tool fixture: HSK A63
            - rapid traverse X 50000 mm/min
            - rapid traverse Y 4000 mm/min
            - rapid traverse Z 50000 mm/min
            - magazin type: rack
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal KEKEISEN UBF-R 2000/13


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42450 · Machining Center - Universal

          KEKEISEN - UBF-R 2000/13 - - 2016 - HEIDENHAIN ITNC 530 HCSI

          Technical details
          x travel 2000 mm︱y travel 1200 mm︱z travel 1330 mm︱-------------------------------------------------- ︱BASIC DESIGN ︱- basic design: bed type ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 6 ︱- .. among of them simultaneous CNC axes 4 ︱- X-axis travel 2000 mm︱- Y-axis travel 1200 mm︱- Z-axis travel 1330 mm︱- rotating range A-axis from 0 °︱- rotating range A-axis up to 180 °︱- rotating range B-axis from 0 °︱- rotating range B-axis up to 360 °︱- rotating range C-axis from 0 °︱- rotating range C-axis up to 360 °︱TABLE ︱- table surface (left-right) 1040 mm︱
          Machine with only 4200 hours of operation Equipped with: - Brankamp collision monitoring - Balluf chip reader - Renishaw probe
            x travel 2000 mm
            y travel 1200 mm
            z travel 1330 mm
            - basic design: bed type
            - number of processing axes (exc. 6
            - .. among of them simultaneous . 4
            - X-axis travel 2000 mm
            - Y-axis travel 1200 mm
            - Z-axis travel 1330 mm
            - rotating range A-axis from 0 °
            - rotating range A-axis up to 180 °
            - rotating range B-axis from 0 °
            - rotating range B-axis up to 360 °
            - rotating range C-axis from 0 °
            - rotating range C-axis up to 360 °
            - table surface (left-right) 1040 mm
            Description :
            Machine with only 4200 hours of operation
            Equipped with:
            - Brankamp collision monitoring
            - Balluf chip reader
            - Renishaw probe
          Datasheet
          Request / Contact
          used  Machining Center - Universal EUMACH UMC 1000


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-38797 · Machining Center - Universal

          EUMACH - UMC 1000 - - 2013 - HEIDENHAIN ITNC 530

          Technical details
          x travel 1000 mm︱y travel 800 mm︱z travel 700 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 5 ︱- .. among of them simultaneous CNC axes 5 ︱- X-axis travel 1000 mm︱- Y-axis travel 800 mm︱- Z-axis travel 700 mm︱TABLE ︱- table surface (left-right) 1000 mm︱- table surface (front-back) 800 mm︱- workpiece load (max) 1500 kg︱- rotation axis: C ︱- - mode of operation: automatic ︱MILLING SPINDLE / HEAD ︱- spindle revolutions (max) 18000 /min︱- tool fixture: HSK A63 ︱AXIS DRIVES
          Machines in very good condition Domestic equipments: - Band filter - Renishaw RMP 60 - 2500 h spindle hours Otional: - Fully equipped tool holder (100 pices new) - Shrinking device Haimer
            x travel 1000 mm
            y travel 800 mm
            z travel 700 mm
            - number of processing axes (exc. 5
            - .. among of them simultaneous . 5
            - X-axis travel 1000 mm
            - Y-axis travel 800 mm
            - Z-axis travel 700 mm
            - table surface (left-right) 1000 mm
            - table surface (front-back) 800 mm
            - workpiece load (max) 1500 kg
            - rotation axis: C
            - - mode of operation: automatic
            - spindle revolutions (max) 18000 /min
            - tool fixture: HSK A63
            Description :
            Machines in very good condition

            Domestic equipments:
            - Band filter
            - Renishaw RMP 60

            - 2500 h spindle hours

            Otional:
            - Fully equipped tool holder (100 pices new)
            - Shrinking device Haimer
          Datasheet
          Request / Contact
          used  Machining Center - Universal MIKRON XSM 400 U


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-40645 · Machining Center - Universal

          MIKRON - XSM 400 U - - 2008 - HEIDENHAIN ITNC 530

          Technical details
          x travel mm︱y travel mm︱z travel mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 5 ︱- .. among of them simultaneous CNC axes 5 ︱- X-axis travel 400 mm︱- Y-axis travel 240 mm︱- Z-axis travel 350 mm︱- rotating range B-axis from 110 °︱- rotating range B-axis up to -110 °︱- rotating range C-axis from 0 °︱- rotating range C-axis up to 360 °︱MILLING SPINDLE / HEAD ︱- spindle revolutions (max) 42000 /min︱- tool fixture: HSK E40 ︱- drive power S1 100% 10 kW︱AXIS DRIVES ︱- rapid traverse 80000 mm/min︱
          TOP machine condition! Furnishing: - 3 D taster - Erowa Power Chuck for ITS 50 / ITS 148 - no tool holder included - Robot interface Last services - 2019/9 Last maintenance by GF - 2019 complete hyd. Become an aggregate - 2018 new ball screw in X. - 2016 new ball screw in Y. - 2016 new spindle Note: Machine to be added for auction Rockwell Automation Switzerland GmbH. Machine is located at 78234 Engen, Germany.
            - number of processing axes (exc. 5
            - .. among of them simultaneous . 5
            - X-axis travel 400 mm
            - Y-axis travel 240 mm
            - Z-axis travel 350 mm
            - rotating range B-axis from 110 °
            - rotating range B-axis up to -110 °
            - rotating range C-axis from 0 °
            - rotating range C-axis up to 360 °
            - spindle revolutions (max) 42000 /min
            - tool fixture: HSK E40
            - drive power S1 100% 10 kW
            - rapid traverse 80000 mm/min
            Description :
            TOP machine condition!

            Furnishing:
            - 3 D taster
            - Erowa Power Chuck for ITS 50 / ITS 148
            - no tool holder included
            - Robot interface

            Last services
            - 2019/9 Last maintenance by GF
            - 2019 complete hyd. Become an aggregate
            - 2018 new ball screw in X.
            - 2016 new ball screw in Y.
            - 2016 new spindle

            Note: Machine to be added for auction Rockwell Automation Switzerland GmbH.
            Machine is located at 78234 Engen, Germany.

          Datasheet
          Request / Contact
          used  Machining Center - Universal STARRAG HECKERT


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-42321 · Machining Center - Universal

          STARRAG HECKERT - - - 2007 - SIEMENS 840 D

          Technical details
          x travel 2800 mm︱y travel 2100 mm︱z travel 1900 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 4 ︱- X-axis travel 2800 mm︱- Y-axis travel 2100 mm︱- Z-axis travel 1900 mm︱- rotating range C-axis from 0 °︱- rotating range C-axis up to 360 °︱TABLE ︱- table surface (left-right) 1600 mm︱- table surface (front-back) 1250 mm︱- workpiece load (max) 8000 kg︱MILLING SPINDLE / HEAD ︱- spindle revolutions (min) 20 /min︱- spindle revolutions (max) 6000 /min︱- tool fixture: ISO SK 50 ︱TOOL MAGAZINE
          Machine in good condition Equipment: - incl. angle head Function video available on request
            x travel 2800 mm
            y travel 2100 mm
            z travel 1900 mm
            - number of processing axes (exc. 4
            - X-axis travel 2800 mm
            - Y-axis travel 2100 mm
            - Z-axis travel 1900 mm
            - rotating range C-axis from 0 °
            - rotating range C-axis up to 360 °
            - table surface (left-right) 1600 mm
            - table surface (front-back) 1250 mm
            - workpiece load (max) 8000 kg
            - spindle revolutions (min) 20 /min
            - spindle revolutions (max) 6000 /min
            - tool fixture: ISO SK 50
            Description :
            Machine in good condition

            Equipment:
            - incl. angle head


            Function video available on request
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical MIKRON HSM 400


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-37974 · Machining Center - Vertical

          MIKRON - HSM 400 - - 2001 - HEIDENHAIN TNC 430

          Technical details
          x travel 400 mm︱y travel 450 mm︱z travel 350 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 3 ︱- .. among of them simultaneous CNC axes 3 ︱- X-axis travel 400 mm︱- Y-axis travel 450 mm︱- Z-axis travel 350 mm︱MILLING SPINDLE / HEAD ︱- spindle type: vertical ︱- spindle revolutions (max) 42000 /min︱- tool fixture: HSK E40 ︱TOOL MAGAZINE ︱- number of positions 68 ︱AUTOMATIC WORKLOAD EQUIPMENT ︱- number of store positions 7 ︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 400 V︱
          Spindle hours 1600h (changed in 10/2016 from manufactor GF) - Machine mostly only 1 shift operation - very good condition Attachments: - STEPTEC spindle - Incl. spindle cooling - PAROTEC clamping system (base plate) - HSK 40, 5 pieces with collets are included - BLUM tool measuring system - external cooling and minimum quantity lubrication - 3D probe
            x travel 400 mm
            y travel 450 mm
            z travel 350 mm
            - number of processing axes (exc. 3
            - .. among of them simultaneous . 3
            - X-axis travel 400 mm
            - Y-axis travel 450 mm
            - Z-axis travel 350 mm
            - spindle type: vertical
            - spindle revolutions (max) 42000 /min
            - tool fixture: HSK E40
            - number of positions 68
            - number of store positions 7
            - mains voltage 400 V
            Description :
            Spindle hours 1600h (changed in 10/2016 from manufactor GF)

            - Machine mostly only 1 shift operation
            - very good condition

            Attachments:
            - STEPTEC spindle
            - Incl. spindle cooling
            - PAROTEC clamping system (base plate)
            - HSK 40, 5 pieces with collets are included
            - BLUM tool measuring system
            - external cooling and minimum quantity lubrication
            - 3D probe
          Datasheet
          Request / Contact
          used  Machining Center - Vertical MIKRON HSM 700


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-39752 · Machining Center - Vertical

          MIKRON - HSM 700 - - 1998 - MIKRON HS-PLUS

          Technical details
          x travel 700 mm︱y travel 550 mm︱z travel 450 mm︱-------------------------------------------------- ︱WORKING RANGE -CUBIC- ︱- number of processing axes (excl parallel axes) 3 ︱- X-axis travel 700 mm︱- Y-axis travel 550 mm︱- Z-axis travel 450 mm︱TABLE ︱- table surface (left-right) 900 mm︱- table surface (front-back) 550 mm︱- workpiece load (max) 700 kg︱MILLING SPINDLE / HEAD ︱- spindle revolutions (min) 100 /min︱- spindle revolutions (max) 42000 /min︱- tool fixture: HSK A40 ︱AXIS DRIVES ︱- feed velocity (max) 20000 mm/min︱- rapid traverse 40000 mm/min︱
          Machine in good condition Function video available on request:
            x travel 700 mm
            y travel 550 mm
            z travel 450 mm
            - number of processing axes (exc. 3
            - X-axis travel 700 mm
            - Y-axis travel 550 mm
            - Z-axis travel 450 mm
            - table surface (left-right) 900 mm
            - table surface (front-back) 550 mm
            - workpiece load (max) 700 kg
            - spindle revolutions (min) 100 /min
            - spindle revolutions (max) 42000 /min
            - tool fixture: HSK A40
            - feed velocity (max) 20000 mm/min
            - rapid traverse 40000 mm/min
            Description :
            Machine in good condition



            Function video available on request:
          Datasheet
          Request / Contact

          Multi-Spindle Boring Machine

          used  Multi-Spindle Boring Machine ACIERA DK4


          • ProdEq Trading
          • Reckholder 1
          • 9527 Niederhelfenschwil
          • Schweiz

          • (0041)71 - 948 7060
            (0041)71 - 948 7069
          • info@prodeq.ch
            www.prodeq.ch
          #1045-41585 · Multi-Spindle Boring Machine

          ACIERA - DK4 - - -

          Technical details
          TECHNICAL SPECIFICATION ︱- Spindle stroke 100 mm︱- number of spindles 2 ︱- Spindle speed from 200 /min︱- .. to 5000 /min︱- number of gears 10 ︱ELECTRICAL SPECIFICATIONS ︱- mains voltage 380 V︱- mains frequency 50 Hz︱
          Aciera double drilling machine (2x 10-T ) Machines in very good condition. The machine is still needed in production until the end of 2021, therefore the machine can not be delivered before beginning of January 2022.
            - Spindle stroke 100 mm
            - number of spindles 2
            - Spindle speed from 200 /min
            - .. to 5000 /min
            - number of gears 10
            - mains voltage 380 V
            - mains frequency 50 Hz
            Description :
            Aciera double drilling machine (2x 10-T )
            Machines in very good condition.


            The machine is still needed in production until the end of 2021,
            therefore the machine can not be delivered before beginning of January 2022.
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Trader Profile:   Prodeq Trading
          GmbH

          Contact Trader



            Prodeq Trading
          GmbH

           Reckholder 1
            9527 - Niederhelfenschwil
            Schweiz
            (0041)71 - 948 7060">(0041)71 - 948 7060
            (0041)71 - 948 7069
            info@prodeq.ch
            www.prodeq.ch

          Profile of Trader

          ProdEq Group - Partner of the Industry.
          Wholesale trading of metalworking machinery.
           
          We sell and buy:
          • machine tools
          • metal manufacturing machinery
          • used industrial equipment
          • complete plants
          Internationality:
          Our international sales network provides access to the global markets of used / secondhand machinery.


          Online Machinery Directory:
          Search and find your desired equipment and machine tool (CNC or non-CNC) in our online directory. All machines for sale are published with comprehensive information.

          Large projects - small projects:
          We realize auctions and liquidations and carry out the sales of your surplus equipment. Please contact us upon any upcoming sales of surplus assets. We trade single machines as well as complete industrial plants.

          Expertise:
          Regardlessly if you sell or buy used machines or equipment. Base your selling decision on our appraisal and your buying decision on our technical advice.

          More than secondhand:
          We also trade a selected portfolio of new equipment, just ask us.


          Trade and service:
          Ask for after sales services as disassembly, overhauls, transportation, import & export, and financing

          Machinery & Equipment:


          ProdEq Trading GmbH
          Reckholder 1, 9527 Niederhelfenschwil, Switzerland


          ProdEq Maschinenhandel GmbH
          Unterdorf 34, 6532 Ladis, Austria


          ProdEq Deutschland GmbH
          Weberweg 2, 42499 Hückeswagen, Germany


          Post-Venta Carreras S.A.
          Pol. Ind. Els Plans d'Arau, C/ Nicolau Copèrnic 2, 08787 La Pobla de Claramunt, Spain


          Guerrieri s.r.l.
          Piazza Giosuè Carducci 6, 21100 Varese (VA), Italy


          ProdEq d.o.o. Trgovina z industrijskimi stroji
          Opekarniska 4, 2327 Race, Slovenia


          Representative Office ProdEq Maschinenhandel GmbH
          16110 Nilüfer/Bursa, Türkei


          Other representative offices: Mexico, Iran
          Please contact one of the above ProdEq offices for more information.




          Prodeq Trading GmbH  9527 - Niederhelfenschwil Reckholder 1 Schweiz
          Prodeq Trading GmbH

          Reckholder 1



          Contact Trader


            Prodeq Trading GmbH
           Reckholder 1
            9527 - Niederhelfenschwil
            Schweiz
            (0041)71 - 948 7060
            (0041)71 - 948 7069
            info@prodeq.ch
            www.prodeq.ch
            Contact person:

           




          Machine category


          · Aufspanntisch · Bandanlage · Bandrichtmaschine · Bandschleifmaschine · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Blech-Richtanlage · Bohrer · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC-Karusselldrehmaschine - Einständer · Doppelscheibenschleifmaschine · Doppelscheibenschleifmaschine - horiz. · Doppelscheibenschleifmaschine - vertik. · Doppelständerpresse - Hydraulisch · Drehmaschine - zyklengesteuert · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Feinstanzpresse · Filteranlage · Fräskopf senkrecht · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Gabelstapler - Elektro · Honmaschine - Innen - Horizontal · Hydraulische - Abkantpresse · Hydraulische Presse · Kaltfließpresse · Koordinatenbohrwerk · Koordinatenmeßmaschine · Koordinatenschleifmaschine · Krananlage · Kühlturm · Kümpelpresse · Langgewinde- und Abwälzfräsmaschine · Leit- und Zugspindeldrehmaschine · Mehrspindelbohrmaschine · Mehrspindelfutterautomat · Ofen · Portalfräsmaschine · Rohrbiegemaschine · Rundschleifmaschine - Außen · Rundtaktmaschine · Schnellradialbohrmaschine · Sinterpresse · Stanzautomat · Stanzautomat - Zweiständer · Ständerbohrmaschine · Tischbohrmaschine · Tischbohrwerk · Transferpresse · Universal - Rundtisch · Universalschleifmaschine · Vertikaldrehmaschine · Vertikale - Flachschleifmaschine · Vorschubapparat · Waschanlage - Kammer · Werkzeug Voreinstellgerät · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal ·