European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Mager & Wedemeyer Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe MAZAK SQT-200


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09200F · CNC Lathe

          MAZAK - SQT-200 - - 2001 - PC FUSION 640 T

          Technical details
          turning diameter 350 mm︱turning length 514 mm︱control PC FUSION 640 T ︱swing dia. 525 mm︱bar material dia. 51 mm︱turning speeds 35 - 5000 U/min︱Main drive power 18,5 KW︱Max. Torque 333 Nm︱spindle nose A2-6'' ︱spindle bore 61 mm︱tool numbers 12 ︱travel -x axis 190 mm︱travel -z axis 535 mm︱rapid traverse 30 m/min︱feeds 0-5000 mm/min︱tailstock quill stroke 150 mm︱tailstock quill diameter 80 mm︱tailstock quill taper MT 5 ︱Tailstock travel 400 mm︱connected load 3,5 x 2 x 1,8 kVA︱
          - Tool Eye - Hydraulic 3-jaw chuck diameter 210 mm - Dual foot switch for opening / closing the chuck - Feedback of chuck status (open / closed) - NC-programmable tailstock - Front door interlock - Complete coolant system - Coolant and chip protection due to fully enclosed work area - Work area lighting - CNC control Mazatrol PC FUSION CNC 640T - Tool path check as background function - Navigation display (monitoring) - PCMCIA interface (2 compartments) - Interface for IC speicer card - Interface for MAZATROL DATA TRANSFER - 1 set of manuals - div tool holder
            turning diameter 350 mm
            turning length 514 mm
            control PC FUSION 640 T
            swing dia. 525 mm
            bar material dia. 51 mm
            turning speeds 35 - 5000 U/min
            Main drive power 18,5 KW
            Max. Torque 333 Nm
            spindle nose A2-6''
            spindle bore 61 mm
            tool numbers 12
            travel -x axis 190 mm
            travel -z axis 535 mm
            rapid traverse 30 m/min
            feeds 0-5000 mm/min
            tailstock quill stroke 150 mm
            tailstock quill diameter 80 mm
            tailstock quill taper MT 5
            Tailstock travel 400 mm
            connected load 3,5 x 2 x 1,8 kVA
            Description :
            - Tool Eye
            - Hydraulic 3-jaw chuck diameter 210 mm
            - Dual foot switch for opening / closing the chuck
            - Feedback of chuck status (open / closed)
            - NC-programmable tailstock
            - Front door interlock
            - Complete coolant system
            - Coolant and chip protection due to fully enclosed work area
            - Work area lighting
            - CNC control Mazatrol PC FUSION CNC 640T
            - Tool path check as background function
            - Navigation display (monitoring)
            - PCMCIA interface (2 compartments)
            - Interface for IC speicer card
            - Interface for MAZATROL DATA TRANSFER
            - 1 set of manuals
            - div tool holder
          Datasheet
          Request / Contact

          milling machining centers - horizontal

          used  milling machining centers - horizontal MAZAK FH-8800


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-4020918 · milling machining centers - horizontal

          MAZAK - FH-8800 - - 2004 - PC Fusion 640 M

          Technical details
          x-travel 1300 mm︱y-travel 1100 mm︱z-travel 1000 mm︱Control PC Fusion 640 M ︱size of pallet 800 x 800 mm︱ Ø1250 x 1250 mm︱turning speed range 35 - 10000 U/min︱transmission ratio 4 ︱feed range 1 - 40 m/min︱rapid travel x/y/z 40 m/min︱table load 2,2 t︱swivelling range 0,001° x 360000 Grad︱table height over floor 1350 mm︱Distance spindle nose - palett surface 150 - 1150 mm︱Distance spindle centre - table surface 100 - 1200 mm︱tool taper CAT 50 ︱max. torque on the spindle 525 Nm︱power capacity - milling spindle 30 / 22 kW︱chain magazin for tools 80 ︱diameter of tools max. 135 mm︱
          -Standard accessories - 2-fold pallet changer - Safety cover for 2-fold pallet changer - Tool length measuring device - Complete coolant system: Flood cooling, spindle cooling, Niagara cooling/rinsing system - Spindle cooling unit - Blow-out device (main spindle holder) - Coolant and chip protection through fully enclosed work area - CNC control Mazatrol PC FUSION CNC 640M dialogue programming - MAZAK Monitoring System C - Tool life monitoring and spare tool call-up (TLM) - Navigation monitoring display - Machining navigation - PCMCIA interface - Automatic partition door opening/closing - Work area door locking - Removable handwheel for three axes - Workspace lighting - 1 set of instructions Including the following optional accessories: - Tool magazine for 80 tools (chain magazine version) - Factory preparation for high-pressure cooling through the spindle 15 bar - NC rotary table (fourth axis 0.001° x 360.000 pos.) - Circular boring cycle, spiral boring of fits - 7 pallets ( 5 x groove, 2 x thread) - Air blast device on the workpiece to remove chips and to cooling of the workpiece by compressed air, actuated by M-command or manually. -Renishaw probe MP 10 - Chip conveyor lateral ejection - Tool breakage monitoring - CNC option package Performance Contents of the package: - Common variables (600 pairs) - MAZAK Tapping Tornado (EIA/ISO) - Synchronous tapping - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03,1), correction of the 3D tool (G40-G42) Scaling (G50, G51) a.o. - EIA/ISO, constant feed (G93) When using this function, the feed rate remains constant for straight lines and curve combinations on the contour remains constant. - EIA/ISO tool length measurement (G37) - EIA/ISO, program unit stop function The programme sequence is automatically stopped at the preset programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function, for precise vector interpolation and optimum acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) all dimensions, weights and performance data without obligation - Second-hand machine without warranty - subject to prior sale
            x-travel 1300 mm
            y-travel 1100 mm
            z-travel 1000 mm
            Control PC Fusion 640 M
            size of pallet 800 x 800 mm
            Ø1250 x 1250 mm
            turning speed range 35 - 10000 U/min
            transmission ratio 4
            feed range 1 - 40 m/min
            rapid travel x/y/z 40 m/min
            table load 2,2 t
            swivelling range 0,001° x 360000 Grad
            table height over floor 1350 mm
            Distance spindle nose - palett s. 150 - 1150 mm
            Distance spindle centre - table . 100 - 1200 mm
            tool taper CAT 50
            max. torque on the spindle 525 Nm
            power capacity - milling spindle 30 / 22 kW
            chain magazin for tools 80
            diameter of tools max. 135 mm
            Description :
            -Standard accessories
            - 2-fold pallet changer
            - Safety cover for 2-fold pallet changer
            - Tool length measuring device
            - Complete coolant system:
            Flood cooling, spindle cooling, Niagara cooling/rinsing system
            - Spindle cooling unit
            - Blow-out device (main spindle holder)
            - Coolant and chip protection through fully enclosed work area
            - CNC control Mazatrol PC FUSION CNC 640M dialogue programming
            - MAZAK Monitoring System C
            - Tool life monitoring and spare tool call-up (TLM)
            - Navigation monitoring display
            - Machining navigation
            - PCMCIA interface
            - Automatic partition door opening/closing
            - Work area door locking
            - Removable handwheel for three axes
            - Workspace lighting
            - 1 set of instructions

            Including the following optional accessories:
            - Tool magazine for 80 tools (chain magazine version)
            - Factory preparation for high-pressure cooling through the spindle 15 bar
            - NC rotary table (fourth axis 0.001° x 360.000 pos.)
            - Circular boring cycle, spiral boring of fits
            - 7 pallets ( 5 x groove, 2 x thread)
            - Air blast device on the workpiece to remove chips and to
            cooling of the workpiece by compressed air, actuated by M-command or
            manually.
            -Renishaw probe MP 10
            - Chip conveyor lateral ejection
            - Tool breakage monitoring
            - CNC option package Performance
            Contents of the package:
            - Common variables (600 pairs)
            - MAZAK Tapping Tornado (EIA/ISO)
            - Synchronous tapping
            - EIA/ISO input function
            - EIA/ISO special function
            Spiral interpolation (G02.1, G03,1), correction of the 3D tool (G40-G42)
            Scaling (G50, G51) a.o.
            - EIA/ISO, constant feed (G93)
            When using this function, the feed rate remains constant for
            straight lines
            and curve combinations on the contour remains constant.
            - EIA/ISO tool length measurement (G37)
            - EIA/ISO, program unit stop function
            The programme sequence is automatically stopped at the preset programme
            unit.
            - MAZACC-2D (Mazatrol & EIA/ISO)
            Precision control function, for precise vector interpolation and optimum
            acceleration and deceleration at edges and radii. This enables
            improved two-dimensional shape accuracy.
            - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs
            - Spiral machining function (G33) for
            boring head machining (e.g. with d'Andrea tool)
            all dimensions, weights and performance data without obligation -
            Second-hand machine without warranty -
            subject to prior sale
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical MAZAK FJV-60/120


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09181F · milling machining centers - vertical

          MAZAK - FJV-60/120 - - 2005 - PC-Fusion-640M

          Technical details
          x-travel 3200 mm︱y-travel 1400 mm︱z-travel 585 mm︱Control PC-Fusion-640M ︱spindle taper CAT 50 ︱column daylight 1500 mm︱spindle turning speed range 22 - 10.000 U/min︱max. torque on the spindle max. 529 Nm︱feeds x/y/z -stepless 1 - 18000 mm/min︱rapid traverse X-axis 20 m/min︱rapid traverse Y-axis 32 m/min︱rapid traverse Z-axis 18 m/min︱table width 1250 mm︱table length 3000 mm︱table load 5000 Kg︱table height over floor 850 mm︱T-slots 9 ︱T-slot - width 22 mm︱T-slot - distance 140 mm︱tool change unit 40
          including the following accessories: - Column elevation by 250 mm - tool magazine for 40 tools (chain magazine version) - additional working area cover fully encapsulated version - factory preparation for cooling by the spindle (max.70 bar, Mayfran) - Mazak Monitoring System B incl. measuring probe (MP12) and function under MAZATROL: zero point adjustment - MAYFRAN CONSEP 2000 chip conveyor rear right ejection incl. high pressure pump - Removable handwheel - Torque-dependent drilling cycle (Mazatrol)Automatic determination of the drilling depth increments after torque detection. (Preferably together with HSS tool) - Circular reaming cycle Spiral reaming of fits - Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer - MAZAK Monitoring System C (AFC, TBR, TLM): Adaptive Feed Control (AFC) Tool breakage monitoring (TBR) Tool life monitoring and replacement tool call (TLM) - Navigation monitoring display - Machining navigation - PCMCIA interface - Spindle cooling unit - Tool length measuring device - Blow out unit - Compl. coolant unit - Coolant and chip protection - Work area lighting - Removable handwheel for three axes - 1 set of manuals - CNC option package Performance Contents of the package: - Common variables (600 pairs) - MAZAK Tapping Tornado (EIA/ISO) - Synchronous tapping - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03,1), Correction of the 3D tool (G40-G42) Scaling (G50, G51) a.o. - EIA/ISO, constant feed (G93) When using this function, the feed rate remains constant for combinations of straight lines and curves on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, program unit stop function Program run is automatically stopped at the program unit is automatically stopped. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function, for precise vector interpolation and optimum acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - all dimensions, weights and performance information are non-binding - - Used machine without warranty - - Subject to prior sale -
            x-travel 3200 mm
            y-travel 1400 mm
            z-travel 585 mm
            Control PC-Fusion-640M
            spindle taper CAT 50
            column daylight 1500 mm
            spindle turning speed range 22 - 10.000 U/min
            max. torque on the spindle max. 529 Nm
            feeds x/y/z -stepless 1 - 18000 mm/min
            rapid traverse X-axis 20 m/min
            rapid traverse Y-axis 32 m/min
            rapid traverse Z-axis 18 m/min
            table width 1250 mm
            table length 3000 mm
            table load 5000 Kg
            table height over floor 850 mm
            T-slots 9
            T-slot - width 22 mm
            T-slot - distance 140 mm
            tool change unit 40
            Description :
            including the following accessories:
            - Column elevation by 250 mm
            - tool magazine for 40 tools (chain magazine version)
            - additional working area cover fully encapsulated version
            - factory preparation for cooling by the spindle (max.70 bar, Mayfran)
            - Mazak Monitoring System B incl. measuring probe (MP12) and function under
            MAZATROL: zero point adjustment
            - MAYFRAN CONSEP 2000 chip conveyor rear right ejection incl. high pressure pump
            - Removable handwheel
            - Torque-dependent drilling cycle (Mazatrol)Automatic determination of the
            drilling depth increments after torque detection. (Preferably together with
            HSS
            tool)
            - Circular reaming cycle Spiral reaming of fits
            - Interface set
            Contents:
            - Interface for keyboard
            - Interface for mouse
            - Interface for printer
            - MAZAK Monitoring System C (AFC, TBR, TLM):
            Adaptive Feed Control (AFC)
            Tool breakage monitoring (TBR)
            Tool life monitoring and replacement tool call (TLM)
            - Navigation monitoring display
            - Machining navigation
            - PCMCIA interface
            - Spindle cooling unit
            - Tool length measuring device
            - Blow out unit
            - Compl. coolant unit
            - Coolant and chip protection
            - Work area lighting
            - Removable handwheel for three axes
            - 1 set of manuals

            - CNC option package Performance
            Contents of the package:
            - Common variables (600 pairs)
            - MAZAK Tapping Tornado (EIA/ISO)
            - Synchronous tapping
            - EIA/ISO input function
            - EIA/ISO special function
            Spiral interpolation (G02.1, G03,1),
            Correction of the 3D tool (G40-G42)
            Scaling (G50, G51) a.o.
            - EIA/ISO, constant feed (G93)
            When using this function, the feed rate remains constant for
            combinations of straight lines and curves on the contour.
            - EIA/ISO tool length measurement (G37)
            - EIA/ISO, program unit stop function
            Program run is automatically stopped at the
            program unit is automatically stopped.
            - MAZACC-2D (Mazatrol & EIA/ISO)
            Precision control function, for precise vector interpolation and optimum
            acceleration and deceleration at edges and radii. This enables
            improved two-dimensional shape accuracy.
            - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs
            - Spiral machining function (G33) for boring head machining (e.g. with
            d'Andrea tool)

            - all dimensions, weights and performance information are non-binding -

            - Used machine without warranty -

            - Subject to prior sale -
          Datasheet
          Request / Contact

          Section Shear - Combined

          used  Section Shear - Combined PEDDINGHAUS Peddiworker 500


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09166F · Section Shear - Combined

          PEDDINGHAUS - Peddiworker 500 - - 1991 -

          Technical details
          round bar steel 32 mm︱square edge steel 30 mm︱L-beam 80 x 8 mm︱hole punhing press: pressure 50 t︱hole punching press: throat 155 mm︱hole punching press: max. length of stroke 10 - 28 mm︱hole punching press: capacity (dia. x thick.) Ø27 in 14 mm︱work height max. 1024 mm︱shear: flat material 190 x 10 mm︱shear: length of knifes 200 mm︱Working height 705 mm︱adjustment of stroke 10 - 28 mm︱oil volume 40 l︱total power requirement 4 kW︱weight of the machine ca. 0,84 t︱dimensions of the machine ca. 0,65 x 1,2 x 1,67 m︱
          Hydraulic Section Shear - Combined
            round bar steel 32 mm
            square edge steel 30 mm
            L-beam 80 x 8 mm
            hole punhing press: pressure 50 t
            hole punching press: throat 155 mm
            hole punching press: max. length. 10 - 28 mm
            hole punching press: capacity (d. Ø27 in 14 mm
            work height max. 1024 mm
            shear: flat material 190 x 10 mm
            shear: length of knifes 200 mm
            Working height 705 mm
            adjustment of stroke 10 - 28 mm
            oil volume 40 l
            total power requirement 4 kW
            weight of the machine ca. 0,84 t
            dimensions of the machine ca. 0,65 x 1,2 x 1,67 m
            Description :
            Hydraulic Section Shear - Combined
          Datasheet
          Request / Contact
          used  Section Shear - Combined PEDDINGHAUS Peddimaster 60/100 H


          • Mager & Wedemeyer
          • Europaallee 24a
          • 28309 Bremen
          • Deutschland

          • +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
          • jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
          #1023-09165F · Section Shear - Combined

          PEDDINGHAUS - Peddimaster 60/100 H - - 1986 -

          Technical details
          round bar steel - mm︱square edge steel - mm︱L-beam 120 x 13 mm︱hole punhing press: pressure 60 t︱hole punching press: throat 510 mm︱hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm︱shear: flat material 500 x 14 mm︱shear: flat material 400 x 16 mm︱shear: flat material 180 x 20 mm︱shear: flat material 120 x 21 mm︱shear: flat material 100 x 22 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,5 t︱dimensions of the machine ca. 1,8 x 0,9 x 1,8 m︱
          Hydraulic Section Shear - Combined
            round bar steel - mm
            square edge steel - mm
            L-beam 120 x 13 mm
            hole punhing press: pressure 60 t
            hole punching press: throat 510 mm
            hole punching press: capacity (d. Ø 27 in 17 mm
            shear: flat material 500 x 14 mm
            shear: flat material 400 x 16 mm
            shear: flat material 180 x 20 mm
            shear: flat material 120 x 21 mm
            shear: flat material 100 x 22 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,5 t
            dimensions of the machine ca. 1,8 x 0,9 x 1,8 m
            Description :
            Hydraulic Section Shear - Combined
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Mager  &  Wedemeyer Werkzeugmaschinen GmbH  28309 - Bremen Europaallee 24a Deutschland


          Contact Trader


            Mager & Wedemeyer Werkzeugmaschinen GmbH
           Europaallee 24a
            28309 - Bremen
            Deutschland
            +49 (0)421 - 33616-100
            +49 (0)421 - 33616-169
            jhagedorn@mager-wedemeyer.com
            www.mager-wedemeyer.com
            Contact person:

           




          Machine category


          Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Vertikal · CNC Drehmaschine · Profilstahlschere - Kombiniert ·