European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Knops Werkzeugmaschinen GmbH & Co. KG - Stockist for used machines

          Machinelist:


          Bar Automatic Lathe - Multi Spindle

          used  Bar Automatic Lathe - Multi Spindle SCHÜTTE S32PC


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05784 · Bar Automatic Lathe - Multi Spindle

          SCHÜTTE - S32PC - - 1999 -

          Technical details
          number of spindles 6 ︱spindle passage 32 mm︱turning length - mm︱Control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          With Iemca bar loader The machine is in working order, but the X axis needs one new valve. Maximum machining diameter 32 mm Configuration (currently) Pos 1: X and Z axes Pos 2: X and Z axes Pos 3: XZ and Z axes Pos 4 XZ and Z axes Pos 5 XZ and XZ axes Pos6 X- and Z-axis (lower collet) and XX (rear side machining tool) Pos 4 has a separate motor for changing the speed on the workpiece (Thread cycle or thread cutting cycle) All tools are sold together with the machine (Hainbuch collet almost any diameter) and all tool holders (drill holders, turning holders: Square 20x20) are included. The bar loading magazine is also included, with 6x diameter 16 plungers and also 6x diameter 32 plungers. (Chip flutes not included, but that is not a great price) the loading magazine is in working condition. All manuals and setup tools are available and will also come with the machine sold.
            number of spindles 6
            spindle passage 32 mm
            turning length - mm
            Description :
            With Iemca bar loader

            The machine is in working order, but the X axis needs one
            new valve.

            Maximum machining diameter 32 mm
            Configuration (currently)
            Pos 1: X and Z axes
            Pos 2: X and Z axes
            Pos 3: XZ and Z axes

            Pos 4 XZ and Z axes
            Pos 5 XZ and XZ axes
            Pos6 X- and Z-axis (lower collet) and XX (rear side machining tool)
            Pos 4 has a separate motor for changing the speed on the workpiece
            (Thread cycle or thread cutting cycle)
            All tools are sold together with the machine (Hainbuch collet
            almost any diameter) and all tool holders (drill holders, turning holders:
            Square 20x20) are included.
            The bar loading magazine is also included, with 6x diameter 16 plungers
            and also 6x diameter 32 plungers. (Chip flutes not included, but that
            is not a great price) the loading magazine is in working condition.
            All manuals and setup tools are available and will also come with
            the machine sold.
          Datasheet
          Request / Contact

          Center Lathe

          used  Center Lathe WOHLENBERG V 1000


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08501 · Center Lathe

          WOHLENBERG - V 1000 - - 1991 -

          Technical details
          turning diameter over bed 1000 mm︱turning diameter over slide rest 760 mm︱turning length 3000 mm︱spindle turning speed range 4,5 - 900 U/min︱spindle bore 104 mm︱total power requirement 30 kW︱weight of the machine ca. 10,5 t︱dimensions of the machine ca. m︱
          - 3-axis D.R.O. - Feed in the upper slide - Multifix quick change tool holder size D with 2 holders - coolant device - steady-rest The lathe chuck (face plate) shown has been replaced by an older one.
            turning diameter over bed 1000 mm
            turning diameter over slide rest 760 mm
            turning length 3000 mm
            spindle turning speed range 4,5 - 900 U/min
            spindle bore 104 mm
            total power requirement 30 kW
            weight of the machine ca. 10,5 t
            Description :
            - 3-axis D.R.O.
            - Feed in the upper slide
            - Multifix quick change tool holder size D with 2 holders
            - coolant device
            - steady-rest

            The lathe chuck (face plate) shown has been replaced by an older one.
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe WOHLENBERG PT1-II 1070


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-2140 · CNC Lathe

          WOHLENBERG - PT1-II 1070 - - 2001/2020 - R&D MTC 2/3

          Technical details
          turning diameter 1070 mm︱turning length 3000 mm︱control R&D MTC 2/3 ︱swing diameter over slide rest 710 mm︱centre distance 3000 mm︱main spindle bore 128 mm︱spindle turning speed range 1,4 - 450 U/min︱transmission ratio 2 ︱x-axis 800 mm︱bed width 710 mm︱feed - longitudinal/cross 0,75 - 6000 mm/min︱max. workpiece weight -without tailstock 2500 kg︱max. workpiece weight between centres 8000 kg︱workpiece weight in steadies max. 10000 kg︱tailstock quill diameter 200 mm︱tailstock quill stroke 350 mm︱main drive motor 55 kW︱dimensions of machine 7,3 x 2,7 x 2,4 m︱weight of the machine ca. 23 t︱
          * CNC-control R&D MTC 2/3 * Autom. 4-station turret SAUTER * Faceplate, diameter 1000 mm * Steady-rest In February/March 2020 the X-axis was completely overhauled (costs 27.392,13 Euro)
            turning diameter 1070 mm
            turning length 3000 mm
            control R&D MTC 2/3
            swing diameter over slide rest 710 mm
            centre distance 3000 mm
            main spindle bore 128 mm
            spindle turning speed range 1,4 - 450 U/min
            transmission ratio 2
            x-axis 800 mm
            bed width 710 mm
            feed - longitudinal/cross 0,75 - 6000 mm/min
            max. workpiece weight -without t. 2500 kg
            max. workpiece weight between ce. 8000 kg
            workpiece weight in steadies max. 10000 kg
            tailstock quill diameter 200 mm
            tailstock quill stroke 350 mm
            main drive motor 55 kW
            dimensions of machine 7,3 x 2,7 x 2,4 m
            weight of the machine ca. 23 t
            Description :
            * CNC-control R&D MTC 2/3
            * Autom. 4-station turret SAUTER
            * Faceplate, diameter 1000 mm
            * Steady-rest

            In February/March 2020 the X-axis was completely overhauled (costs 27.392,13
            Euro)
          Datasheet
          Request / Contact
          used  CNC Lathe POREBA TRP 110 MN


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08470 · CNC Lathe

          POREBA - TRP 110 MN - - 2001 - Siemens 840 D

          Technical details
          turning diameter 1100 mm︱turning length ca. 5000 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. 13 t︱dimensions of the machine ca. 7600 x 2800 x 2200 mm︱
          Condition: It has only been used few hundred hours per year and is in excellent condition. Turning diameter: 1100 mm Swing over crosslide: 740 mm Center distance: 5000 mm Spindle bore: 95 mm Spindle nose: A1-11 Taper in tailstock: MK 6 Work piece weight: 6000 kg Work piece weight with steadies: 9800 kg Spindle speed: 8-800 rpm Torque: 8500 Nm Longd. feed: 0,01-10 mm/r Cross feed: 0,01-5 mm/r Motor: 30 kW Length: 7600 mm Width: 2800 mm Height: 2200 mm Weight: 13 ton Other/Accessories Multifix D1, SCA typ 624 A1-11 4-jaw chuck ø1000mm. 3pcs. steady rests: ø40-400, ø400-600 & ø550-750mm, coolant.
            turning diameter 1100 mm
            turning length ca. 5000 mm
            control Siemens 840 D
            weight of the machine ca. 13 t
            dimensions of the machine ca. 7600 x 2800 x 2200 mm
            Description :
            Condition:
            It has only been used few hundred hours per year and is in excellent
            condition.

            Turning diameter: 1100 mm
            Swing over crosslide: 740 mm
            Center distance: 5000 mm
            Spindle bore: 95 mm
            Spindle nose: A1-11
            Taper in tailstock: MK 6
            Work piece weight: 6000 kg
            Work piece weight with steadies: 9800 kg
            Spindle speed: 8-800 rpm
            Torque: 8500 Nm
            Longd. feed: 0,01-10 mm/r
            Cross feed: 0,01-5 mm/r
            Motor: 30 kW
            Length: 7600 mm
            Width: 2800 mm
            Height: 2200 mm
            Weight: 13 ton
            Other/Accessories

            Multifix D1, SCA typ 624 A1-11 4-jaw chuck ø1000mm. 3pcs. steady rests:
            ø40-400, ø400-600 & ø550-750mm, coolant.
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center MAZAK Multiplex 6200 Y


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-2160 · CNC Turning- and Milling Center

          MAZAK - Multiplex 6200 Y - - 2006-12 -

          Technical details
          turning diameter 320 mm︱turning length - mm︱control ︱total power requirement kW︱weight of the machine ca. 8,4 t︱dimensions of the machine ca. m︱
          CNC Tunring center MAZAK MULTIPLEX 6200 Y + Flex GL-100F Mfg. year 12/2006 Mazatrol 640 T Nexus control Max. turning diamter 320 mm movements: X1/X2: 240 mm Y1/Y2: 100 mm Z1/Z2: 440 mm/495 mm Left and right spindle AC 22/15 kW - Spindle bore 61 mm - Max. spindle speed 5.000 rpm - Max. torque 350 Nm Turret left and right side with y-axis 2 x 12-station turret 2 x 12 driven tool stations - AC3,7 kW, max. speed 4.500 rpm 2 x full C-axis Automatic partition wall Automatic tooleye High pressure coolant, 2 x 15 bar Pumps Mayfran Concep 2000, swarf coneyor 1 set of toolholders Portallader GL-100F, pitch feed conveyor D3 Hand - Max. workpiece weight 10 kg x 2 Stück - Max. workpiece diamter 200 mm 1 off. 3-jawchuck KNCS-N 210-52, Diameter 210 mm 1 Stck. collet chuck Hainbuch Spanntop Axfix 100, collet up to 100 mm CE-mark Maschine without oil-mist-extractor!
            turning diameter 320 mm
            turning length - mm
            weight of the machine ca. 8,4 t
            Description :
            CNC Tunring center
            MAZAK MULTIPLEX 6200 Y + Flex GL-100F
            Mfg. year 12/2006

            Mazatrol 640 T Nexus control
            Max. turning diamter 320 mm
            movements:
            X1/X2: 240 mm
            Y1/Y2: 100 mm
            Z1/Z2: 440 mm/495 mm
            Left and right spindle AC 22/15 kW
            - Spindle bore 61 mm
            - Max. spindle speed 5.000 rpm
            - Max. torque 350 Nm
            Turret left and right side with y-axis
            2 x 12-station turret
            2 x 12 driven tool stations
            - AC3,7 kW, max. speed 4.500 rpm
            2 x full C-axis
            Automatic partition wall
            Automatic tooleye
            High pressure coolant, 2 x 15 bar Pumps
            Mayfran Concep 2000, swarf coneyor
            1 set of toolholders
            Portallader GL-100F, pitch feed conveyor
            D3 Hand
            - Max. workpiece weight 10 kg x 2 Stück
            - Max. workpiece diamter 200 mm
            1 off. 3-jawchuck KNCS-N 210-52, Diameter 210 mm
            1 Stck. collet chuck Hainbuch Spanntop Axfix 100, collet up to 100 mm
            CE-mark

            Maschine without oil-mist-extractor!

          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center EMCO EMCOTURN 900


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08525 · CNC Turning- and Milling Center

          EMCO - EMCOTURN 900 - - 2006 - Siemens 840 D

          Technical details
          turning diameter 1000 mm︱turning length 2000 mm︱control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Siemens 840 D Driven tools C-axis Tailstock Hydraulic jaw chuck Chip conveyor Coolant device Machine is sold without tools / holders
            turning diameter 1000 mm
            turning length 2000 mm
            control Siemens 840 D
            Description :
            CNC control Siemens 840 D
            Driven tools
            C-axis
            Tailstock
            Hydraulic jaw chuck
            Chip conveyor
            Coolant device

            Machine is sold without tools / holders
          Datasheet
          Request / Contact

          Heavy Duty Lathe

          used  Heavy Duty Lathe CRAVEN 80,5


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H05287 · Heavy Duty Lathe

          CRAVEN - 80,5 - - ca.1960 -

          Technical details
          turning diameter over bed 4100 mm︱turning diameter over slide rest 3505 mm︱turning length 12000 mm︱centre height 2045 mm︱centre distance 12192 mm︱bed width 4270 mm︱max. workpiece weight between centres 70000 kg︱main drive 110 PS︱faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min︱total power requirement kW︱weight of the machine ca. 205 t︱dimensions of the machine ca. m︱
          4 SLIDES BED LATHE CENTRES HEIGHT 2.045 MM. CENTRES DISTANCE 12.192 MM. MAX. Æ OVER BED 4.100 MM. MAX. Æ OVER SADDLE 3.505 MM. BED WIDTH 4.270 MM. MAX. WEIGHT BETWEEN CENTRES 70 TONS. MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS. TABLE MOTOR POWER 110 HP. TABLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM. SPINDLE HOLE 180 MM. TOTAL WEIGHT 205 COMPLETE WITH: - 4 JAWS TABLE 3.660 MM. - N. 2 CLOSED STEADIES - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS - UPPER SADDLE FOR THREADING - CRANK SHAFTS TURNING DEVICE
            turning diameter over bed 4100 mm
            turning diameter over slide rest 3505 mm
            turning length 12000 mm
            centre height 2045 mm
            centre distance 12192 mm
            bed width 4270 mm
            max. workpiece weight between ce. 70000 kg
            main drive 110 PS
            faceplate turning speed range 0,3- 48,6 (4 Stufen) U/min
            weight of the machine ca. 205 t
            Description :
            4 SLIDES BED LATHE

            CENTRES HEIGHT 2.045 MM.

            CENTRES DISTANCE 12.192 MM.

            MAX. Æ OVER BED 4.100 MM.

            MAX. Æ OVER SADDLE 3.505 MM.

            BED WIDTH 4.270 MM.

            MAX. WEIGHT BETWEEN CENTRES 70 TONS.

            MAX. WEIGHT BETWEEN CENTRES (with n. 1 steady) 80 TONS.

            TABLE MOTOR POWER 110 HP.

            TABLE SPEEDS - n. 4 ranges 0,3 ÷ 48,6 RPM.

            SPINDLE HOLE 180 MM.

            TOTAL WEIGHT 205


            COMPLETE WITH:
            - 4 JAWS TABLE 3.660 MM.
            - N. 2 CLOSED STEADIES
            - N. 2 SPECIAL SUPPORTS FOR CRANK SHAFTS
            - UPPER SADDLE FOR THREADING
            - CRANK SHAFTS TURNING DEVICE
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe FRORIEP 4000 x 13000


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H07408 · Heavy Duty Lathe

          FRORIEP - 4000 x 13000 - - approx. 1970 -

          Technical details
          turning diameter over bed 4000 mm︱turning diameter over slide rest 2220 mm︱turning length 13000 mm︱faceplate diameter 2540 mm︱max. workpiece weight between centres 100 ton︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Heavy Duty Lathe with steady-rests in excellent condition. Nr. 4 guides Diameter face plate mm 2.540 Working diameter mm 4.000 x 6.500 Working diameter mm 2.220 x 13.000 Inspection under power possible.
            turning diameter over bed 4000 mm
            turning diameter over slide rest 2220 mm
            turning length 13000 mm
            faceplate diameter 2540 mm
            max. workpiece weight between ce. 100 ton
            Description :
            Heavy Duty Lathe with steady-rests in excellent condition.

            Nr. 4 guides
            Diameter face plate mm 2.540
            Working diameter mm 4.000 x 6.500
            Working diameter mm 2.220 x 13.000


            Inspection under power possible.
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe OERLIKON DM 6


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08573 · Heavy Duty Lathe

          OERLIKON - DM 6 - - 2013 retrofit. - Siemens 840 D

          Technical details
          turning diameter over bed 2000 mm︱turning diameter over slide rest 1500 mm︱centre distance 6000 mm︱Control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. 28 t︱dimensions of the machine ca. m︱
          Complete renovation in 2013, (for 410,000 EUR) according to UVV (safety barrier and light barriers) New electrics, new electronics, new motors, new drives, new spindle bearings, ball screws, etc. Control SIEMENS 840 D with HR in the protected operating position Turning diameter over bed = 2000 mm Turning diameter over slide = 1500 mm 4 jaw chucks - face plate diameter = 1650 mm Maximum speed = 130 rpm Max revolution special operating mode = 4.4 1 / min Distance between centers = 6000 mm Max. Workpiece weight = 10000 kg Tailstock with center points Grinding device for external grinding, face grinding, grinding speed up to 10,000 rpm Belt grinding device for superfinishing Chip conveyor Various steady rests and accessories. Weight machine approx. 28,000 kg
            turning diameter over bed 2000 mm
            turning diameter over slide rest 1500 mm
            centre distance 6000 mm
            Control Siemens 840 D
            weight of the machine ca. 28 t
            Description :
            Complete renovation in 2013, (for 410,000 EUR) according to UVV (safety barrier
            and light barriers)
            New electrics, new electronics, new motors, new drives, new
            spindle bearings, ball screws, etc.
            Control SIEMENS 840 D with HR in the protected operating position

            Turning diameter over bed = 2000 mm
            Turning diameter over slide = 1500 mm
            4 jaw chucks - face plate diameter = 1650 mm
            Maximum speed = 130 rpm
            Max revolution special operating mode = 4.4 1 / min
            Distance between centers = 6000 mm
            Max. Workpiece weight = 10000 kg
            Tailstock with center points
            Grinding device for external grinding, face grinding, grinding speed up to
            10,000 rpm
            Belt grinding device for superfinishing
            Chip conveyor
            Various steady rests and accessories.
            Weight machine approx. 28,000 kg
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe QIQIHAR HT125x110/12


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08290 · Heavy Duty Lathe

          QIQIHAR - HT125x110/12 - - 2009 -

          Technical details
          turning diameter over bed 1250 mm︱turning diameter over slide rest 1000 mm︱turning length 11000 mm︱total power requirement kW︱weight of the machine ca. 49 t︱dimensions of the machine ca. m︱
          Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual
            turning diameter over bed 1250 mm
            turning diameter over slide rest 1000 mm
            turning length 11000 mm
            weight of the machine ca. 49 t
            Description :
            Center height 720 mm
            Center distance 11000 mm
            Turning diameter over bed 1250 mm
            Turning diameter over slide 1000 mm
            Workpiece weight max 12 to
            Speed 3-315 rpm - stepless
            Motor power 55 kW (DC)

            Equipment
            1 position indicator HEIDENHAIN | Type ND 780 for 1 axis
            1 four-jaw faceplate Ø 1000 mm
            1 fixed steady rest
            1 ring steady rest with four-jaw faceplate Ø 920 mm
            1 Autom. 4-pos. tool holder
            1 Chip conveyor
            1 Machine lamp
            1 Coolant device
            Operating key | operating manual
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe POREBA TCG 200


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H07413 · Heavy Duty Lathe

          POREBA - TCG 200 - - 2002 -

          Technical details
          turning diameter over bed 2000 mm︱turning diameter over slide rest 1680 mm︱turning length 17000 mm︱centre height 1000 mm︱max. workpiece weight between centres 30000 kg︱spindle turning speed range 0,8 - 160 U/min︱spindle bore 105 mm︱bed width 1600 mm︱bed height over floor 600 mm︱main drive 75 kW︱tailstock quill diameter 280 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱steady-rests 3 Stück (pieces) ︱D.R.O. X-Achse (axis)
            turning diameter over bed 2000 mm
            turning diameter over slide rest 1680 mm
            turning length 17000 mm
            centre height 1000 mm
            max. workpiece weight between ce. 30000 kg
            spindle turning speed range 0,8 - 160 U/min
            spindle bore 105 mm
            bed width 1600 mm
            bed height over floor 600 mm
            main drive 75 kW
            tailstock quill diameter 280 mm
            steady-rests 3 Stück (pieces)
            D.R.O. X-Achse (axis)
          Datasheet
          Request / Contact
          used  Heavy Duty Lathe SKODA SIU 126


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08586 · Heavy Duty Lathe

          SKODA - SIU 126 - - 1967/retrofit 2000 - Heidenhain Manual Plus

          Technical details
          turning diameter over bed 1260 mm︱turning diameter over slide rest 1000 mm︱turning length 7000 mm︱Control Heidenhain Manual Plus ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Completely overhauled 1999-2000 Control: Heidenhain Manual Plus CNC Swing diameter over the bed: 1260 mm Swing diameter over the cross slides: 1000 mm Turning length: max. 7000 mm Bed length: 8500 mm Centre height: 630 mm Work piece weight between centres: max. 20000 kg Work piece weight between centres with steadies: max. 30000 kg Feeds: X 0 - 1440 mm/min. Z 0 - 3600 mm/min. Spindle drive motor rating: 56 KW Spindle speeds: 0.56 - 280 rpm Chuck diameter: 1260 mm Chuck type: faceplate Diameter in steadies: 150 / 630 mm Tool bite size: 70 mm Equipped with: Taper turning; Thread cutting; Coolant unit; Boring bar holder; Chip conveyor
            turning diameter over bed 1260 mm
            turning diameter over slide rest 1000 mm
            turning length 7000 mm
            Control Heidenhain Manual Plus
            Description :
            Completely overhauled 1999-2000

            Control: Heidenhain Manual Plus CNC

            Swing diameter over the bed: 1260 mm
            Swing diameter over the cross slides: 1000 mm
            Turning length: max. 7000 mm
            Bed length: 8500 mm
            Centre height: 630 mm
            Work piece weight between centres: max. 20000 kg
            Work piece weight between centres with steadies: max. 30000 kg

            Feeds: X 0 - 1440 mm/min.
            Z 0 - 3600 mm/min.

            Spindle drive motor rating: 56 KW
            Spindle speeds: 0.56 - 280 rpm
            Chuck diameter: 1260 mm
            Chuck type: faceplate

            Diameter in steadies: 150 / 630 mm
            Tool bite size: 70 mm

            Equipped with:
            Taper turning;
            Thread cutting;
            Coolant unit;
            Boring bar holder;
            Chip conveyor
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled KERN-DMT CD 1100


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05856 · Lathe - cycle-controlled

          KERN-DMT - CD 1100 - - 2014 - Heidenhain MANUALplus

          Technical details
          turning diameter 1100 mm︱turning length 6000 mm︱control Heidenhain MANUALplus ︱total power requirement kW︱weight of the machine ca. 15,1 t︱dimensions of the machine ca. 10,58 x 2,77 x 2,31 m︱
          CNC-Lathe, cycle-controlled, with ONLY 490 working hours ! Equipment / Accessories: - ZF drive, 2 steps - automatic central lubrication - chip conveyor - 2 pcs. steady rests, max. passage 320 mm + 540 mm - various Multifix steel holders - documentation turning diameter 1100 mm turning length 6000 mm control Heidenhain MANUALplus 620 Max. swing diameter over bed 1120 mm Swing diameter over cross slide 820 mm slide travel facial 600 mm spindle bore 132 mm spindle taper 140 metr main spindle drive (at 60% ED) 46 kW Speed range 1-1800 rpm feed range - face slide / stepless 0,001-1000 mm/r feed range - longitudinal slide /stepless 0,001-2000 mm/r thread pitch min. 0,01 mm thread pitch max. 999,9 mm rapid travel - longitudinal/face 10/5 m/min diameter of quill 125 mm quill travel 280 mm taper MK 6
            turning diameter 1100 mm
            turning length 6000 mm
            control Heidenhain MANUALplus
            weight of the machine ca. 15,1 t
            dimensions of the machine ca. 10,58 x 2,77 x 2,31 m
            Description :
            CNC-Lathe, cycle-controlled, with ONLY 490 working hours !

            Equipment / Accessories:
            - ZF drive, 2 steps
            - automatic central lubrication
            - chip conveyor
            - 2 pcs. steady rests, max. passage 320 mm + 540 mm
            - various Multifix steel holders
            - documentation

            turning diameter 1100 mm
            turning length 6000 mm
            control Heidenhain MANUALplus 620
            Max. swing diameter over bed 1120 mm
            Swing diameter over cross slide 820 mm
            slide travel facial 600 mm
            spindle bore 132 mm
            spindle taper 140 metr
            main spindle drive (at 60% ED) 46 kW
            Speed range 1-1800 rpm
            feed range - face slide / stepless 0,001-1000 mm/r
            feed range - longitudinal slide /stepless 0,001-2000 mm/r
            thread pitch min. 0,01 mm
            thread pitch max. 999,9 mm
            rapid travel - longitudinal/face 10/5 m/min
            diameter of quill 125 mm
            quill travel 280 mm
            taper MK 6

          Datasheet
          Request / Contact
          used  Lathe -  cycle-controlled KERN / DMT CD 480


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-2099 · Lathe - cycle-controlled

          KERN / DMT - CD 480 - - 2007 - Heidenhain MANUALplus 4110

          Technical details
          turning diameter 360 mm︱turning length 820 mm︱control Heidenhain MANUALplus 4110︱travel -z axis 890 mm︱swing diameter over flat guideway 475 mm︱swing diameter over face slide 260 mm︱cross movement 260 mm︱main drive motor 22/19,5/17 kW︱transmission ratio 2 ︱spindle turning speed range 1 - 3000 U/min︱spindle diameter in front bearing 110 mm︱rapid travel - longitudinal/face 10/5 m/min︱power feed longitudinal 9000 N︱power feed coss 6000 N︱tailstock quill taper MT 5 ︱tailstock quill diameter 70 mm︱tailstock quill stroke 120 mm︱total power requirement kW︱weight of the machine ca. 2,9 t︱dimensions of the machine ca. 4150 x 2825 x 1700 mm︱
          Equipped with: Control Heidenhain MANUALplus 4110 Toolholder and boring holder Chip conveyor Hydraulic unit for power-chuck Documentation Without chuck.
            turning diameter 360 mm
            turning length 820 mm
            control Heidenhain MANUALplus 4110
            travel -z axis 890 mm
            swing diameter over flat guidewa. 475 mm
            swing diameter over face slide 260 mm
            cross movement 260 mm
            main drive motor 22/19,5/17 kW
            transmission ratio 2
            spindle turning speed range 1 - 3000 U/min
            spindle diameter in front bearin. 110 mm
            rapid travel - longitudinal/face 10/5 m/min
            power feed longitudinal 9000 N
            power feed coss 6000 N
            tailstock quill taper MT 5
            tailstock quill diameter 70 mm
            tailstock quill stroke 120 mm
            weight of the machine ca. 2,9 t
            dimensions of the machine ca. 4150 x 2825 x 1700 mm
            Description :
            Equipped with:
            Control Heidenhain MANUALplus 4110
            Toolholder and boring holder
            Chip conveyor
            Hydraulic unit for power-chuck
            Documentation

            Without chuck.

          Datasheet
          Request / Contact

          Vertical Turret Lathe - Double Column

          used  Vertical Turret Lathe - Double Column TOSHIBA-SHIBAURA TD 60 / 85


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08584 · Vertical Turret Lathe - Double Column

          TOSHIBA-SHIBAURA - TD 60 / 85 - - 1981/retrofit 2013 - Siemens 840 D

          Technical details
          faceplate diameter 6000 mm︱swing diameter 8500 mm︱turning height 4600 mm︱Control Siemens 840 D ︱table load 165 t︱total power requirement kW︱weight of the machine ca. 250-300 t︱dimensions of the machine ca. m︱
          CNC VTL with C-axis & milling unit Rebuild in 2013 with complete new servo motors and drives, control Siemens 840 D Specification : Turning diameter 8500 mm Turning height 4600 mm Table diameter 6000 mm Max. table loading capacity 165 tons Milling Ram size -450 X 500 mm Turning Ram size - 320 X 320 mm Milling Ram travel - 2000 mm Turning Ram travel - 2300 mm Tool taper ISO 50 With c-axis Milling function Main motor for c axis is 110 kw. New DC motor And for milling it is 5 kw servo motor with a big zero backlash gear box. Accessories and tooling with the machine.
            faceplate diameter 6000 mm
            swing diameter 8500 mm
            turning height 4600 mm
            Control Siemens 840 D
            table load 165 t
            weight of the machine ca. 250-300 t
            Description :
            CNC VTL with C-axis & milling unit

            Rebuild in 2013 with complete new servo motors and drives, control Siemens 840 D

            Specification :
            Turning diameter 8500 mm
            Turning height 4600 mm
            Table diameter 6000 mm
            Max. table loading capacity 165 tons
            Milling Ram size -450 X 500 mm
            Turning Ram size - 320 X 320 mm
            Milling Ram travel - 2000 mm
            Turning Ram travel - 2300 mm
            Tool taper ISO 50
            With c-axis
            Milling function
            Main motor for c axis is 110 kw. New DC motor
            And for milling it is 5 kw servo motor with a big zero backlash gear box.

            Accessories and tooling with the machine.

          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column Quqihar Heavy SMVTM 1600


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05553 · Vertical Turret Lathe - Single Column

          Quqihar Heavy - SMVTM 1600 - - 2011 - Siemens 840 D

          Technical details
          faceplate diameter 8000 mm︱swing diameter 16000 mm︱turning height 3000 mm︱Control Siemens 840 D ︱ram head - vertical travel 2500 mm︱workpiece weight 250 t︱faceplate speeds: 16 U/min︱ram head - vertical travel 2500 mm︱milling spindle turning speed range: 1000 U/min︱tool taper HSK 100 ︱main drive motor 132 kW︱total power requirement kW︱weight of the machine ca. 420 t︱dimensions of the machine ca. m︱
          - CNC-control SIEMENS 840 D - Boring and milling device - C-axis - Universal angular milling head
            faceplate diameter 8000 mm
            swing diameter 16000 mm
            turning height 3000 mm
            Control Siemens 840 D
            ram head - vertical travel 2500 mm
            workpiece weight 250 t
            faceplate speeds: 16 U/min
            ram head - vertical travel 2500 mm
            milling spindle turning speed ra. 1000 U/min
            tool taper HSK 100
            main drive motor 132 kW
            weight of the machine ca. 420 t
            Description :
            - CNC-control SIEMENS 840 D
            - Boring and milling device
            - C-axis
            - Universal angular milling head
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column DÖRRIES CTE 160


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05626 · Vertical Turret Lathe - Single Column

          DÖRRIES - CTE 160 - - 1977/2007 - Heidenhain

          Technical details
          faceplate diameter 1600 mm︱swing diameter 1800 mm︱turning height 1500 mm︱Control Heidenhain ︱max. ram stroke 1200 mm︱faceplate turning speed range 0 - 200 U/min︱main drive motor 85 kW︱workpiece weight max. 8000 kg︱total power requirement kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 8,4 x 4,5 x 5,3 m︱
          In 2007 geometrically overhauled and modernized (retrofit) * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles: - Right ram (axes X1 and Z1), faceplate (S) * D.R.O. make HEIDENHAIN ND 780 for following axes: - Left ram (axes X2 and Z2), crossrail * Two rams: - ram (right hand side) with 16-station ATC - ram (left hand side) with 4-station turret * Swarf conveyor
            faceplate diameter 1600 mm
            swing diameter 1800 mm
            turning height 1500 mm
            Control Heidenhain
            max. ram stroke 1200 mm
            faceplate turning speed range 0 - 200 U/min
            main drive motor 85 kW
            workpiece weight max. 8000 kg
            weight of the machine ca. 25 t
            dimensions of the machine ca. 8,4 x 4,5 x 5,3 m
            Description :
            In 2007 geometrically overhauled and modernized (retrofit)

            * CNC-control HEIDENHAIN ManualPlus 4110 for following axes/spindles:
            - Right ram (axes X1 and Z1), faceplate (S)
            * D.R.O. make HEIDENHAIN ND 780 for following axes:
            - Left ram (axes X2 and Z2), crossrail
            * Two rams:
            - ram (right hand side) with 16-station ATC
            - ram (left hand side) with 4-station turret
            * Swarf conveyor
          Datasheet
          Request / Contact
          used  Vertical Turret Lathe - Single Column DÖRRIES SD 140


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05555 · Vertical Turret Lathe - Single Column

          DÖRRIES - SD 140 - - 1976/2010 -

          Technical details
          faceplate diameter 1400 mm︱swing diameter 1780 mm︱turning height 1050 mm︱ram head - vertical travel 750 mm︱Control ︱total power requirement 55 kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 3500 x 3500 x 3500 (4000) mm︱
          Retrofit 2010 Control HEIDENHAIN 4110
            faceplate diameter 1400 mm
            swing diameter 1780 mm
            turning height 1050 mm
            ram head - vertical travel 750 mm
            total power requirement 55 kW
            weight of the machine ca. 20 t
            dimensions of the machine ca. 3500 x 3500 x 3500 (4000) mm
            Description :
            Retrofit 2010

            Control HEIDENHAIN 4110

          Datasheet
          Request / Contact

          Flange Drilling Machine

          used  Flange Drilling Machine ELHA


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05605 · Flange Drilling Machine

          ELHA - - - 2006 - SIEMENS 840 D

          Technical details
          bore capacity in steel (diameter) - mm︱max. pitch circle 1000 - 3000 mm︱number of spindles 1 ︱Control SIEMENS 840 D ︱table diameter 2800 mm︱table turning speeds 6 U/min︱workpiece weight max. 5000 kg︱travel -x axis 1000 mm︱travel -z axis 900 mm︱feed range 0 - 1200 mm/min︱rapid traverse 20 m/min︱workpiece diameter 1200 - 3200 mm︱workpiece height 50 - 300 mm︱distance spindle /table 200 / 1100 mm︱tool taper HSK-A 100 ︱spindle turning speed range 5 - 3800 U/min︱power capacity 30 kW︱total power requirement 60 kW︱weight of the machine ca. 25 t︱dimensions of the machine ca. 9,0 x 8,0 x 4,5 m︱
          Used 1-spindle rotary table machining centre * CNC-control SIEMENS Sinumerik 840 D * Controlled axes: X, Z, C * 6-jaw power chuck
            bore capacity in steel (diameter. - mm
            max. pitch circle 1000 - 3000 mm
            number of spindles 1
            Control SIEMENS 840 D
            table diameter 2800 mm
            table turning speeds 6 U/min
            workpiece weight max. 5000 kg
            travel -x axis 1000 mm
            travel -z axis 900 mm
            feed range 0 - 1200 mm/min
            rapid traverse 20 m/min
            workpiece diameter 1200 - 3200 mm
            workpiece height 50 - 300 mm
            distance spindle /table 200 / 1100 mm
            tool taper HSK-A 100
            spindle turning speed range 5 - 3800 U/min
            power capacity 30 kW
            total power requirement 60 kW
            weight of the machine ca. 25 t
            dimensions of the machine ca. 9,0 x 8,0 x 4,5 m
            Description :
            Used 1-spindle rotary table machining centre

            * CNC-control SIEMENS Sinumerik 840 D
            * Controlled axes: X, Z, C
            * 6-jaw power chuck
          Datasheet
          Request / Contact

          Floor Type Boring and Milling M/C - Hor.

          used  Floor Type Boring and Milling M/C - Hor. WMW BFP 130/6 CNC


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08592 · Floor Type Boring and Milling M/C - Hor.

          WMW - BFP 130/6 CNC - - 1984/1996 retrofit - HEIDENHAIN TNC 360

          Technical details
          spindle diameter 130 mm︱x-travel 6000 mm︱y-travel 2500 mm︱Control HEIDENHAIN TNC 360 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control HEIDENHAIN TNC 360 Spindle diameter 130 mm Spindle taper ISO 50 Spindle speed max RPM 900 Travel size: X=6000 mm Y=2500 mm Z=900 mm W=360 mm Accessories: Facing head Rotary table TI 1800 Table surface 1800x2000 mm Table load 12500 kg Table movement 1200 mm Machine without floor plates
            spindle diameter 130 mm
            x-travel 6000 mm
            y-travel 2500 mm
            Control HEIDENHAIN TNC 360
            Description :
            CNC control HEIDENHAIN TNC 360
            Spindle diameter 130 mm
            Spindle taper ISO 50
            Spindle speed max RPM 900
            Travel size:
            X=6000 mm
            Y=2500 mm
            Z=900 mm
            W=360 mm
            Accessories:
            Facing head
            Rotary table TI 1800
            Table surface 1800x2000 mm
            Table load 12500 kg
            Table movement 1200 mm

            Machine without floor plates

          Datasheet
          Request / Contact
          used  Floor Type Boring and Milling M/C - Hor. WOTAN Rapid


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08576 · Floor Type Boring and Milling M/C - Hor.

          WOTAN - Rapid - - 1982 retrofit 2009 - Siemens 840 D

          Technical details
          spindle diameter 130 mm︱x-travel 6000 mm︱y-travel 1600 mm︱Control Siemens 840 D ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          CNC control Siemens 840 D, retrofitted in the year 2009 X 6000 mm Y 1600 mm Z 800 mm. Rotary table 1800 x 1400 mm W-axis table 2000 mm Spindle diameter 130 mm Spindle max. 2000 rpm. Spindle taper ISO 50 ATC (tool changer) 60 pos. 2 angular milling heads 1 Extra rotary table (4th axis) 4 pieces of clamping plates, a total of 8 × 4m = 32m²
            spindle diameter 130 mm
            x-travel 6000 mm
            y-travel 1600 mm
            Control Siemens 840 D
            Description :
            CNC control Siemens 840 D, retrofitted in the year 2009
            X 6000 mm
            Y 1600 mm
            Z 800 mm.
            Rotary table 1800 x 1400 mm
            W-axis table 2000 mm
            Spindle diameter 130 mm
            Spindle max. 2000 rpm.
            Spindle taper ISO 50
            ATC (tool changer) 60 pos.
            2 angular milling heads
            1 Extra rotary table (4th axis)
            4 pieces of clamping plates, a total of 8 × 4m = 32m²



          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal DECKEL- MAHO DMC 65 H duoBLOCK


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08583 · Machining Center - Horizontal

          DECKEL- MAHO - DMC 65 H duoBLOCK - - 2012 - Siemens 840 D

          Technical details
          x-travel 700 mm︱y-travel 700 mm︱z-travel 700 mm︱Control Siemens 840 D ︱total power requirement 57 kVA︱weight of the machine ca. 9,7 t︱dimensions of the machine ca. m︱
          3-D control: Siemens 840 D Solutionline Main drive: motor spindle: 12000 rpm Power: 20 kW Tool holder: HSK-A 63 according to DIN 6983 Tool changer: 80 magazine locations / double gripper NC rotary table with pallet carrier Rotary pallet changer: 2 pallets 500 x 500 mm with T-slots DIN 55201-A2 Tool identification 4-color signal lamp Production package: coolant system 980 liters, paper belt filter IKZ 40 bar / 23 l / min. through the spindle center (AD), roof flush Working space 300 l / min. Rotating lens Flushing gun with pump 2 bar / 40 l / min. Oil and emulsion mist separation system Electronic handwheel Siemens 840 D Siemens control panel for loading station. Tool magazine with TFT screen Direct linear measuring system in X, Y, Z-axis Dynamics package DMG MORI Netservice - on board
            x-travel 700 mm
            y-travel 700 mm
            z-travel 700 mm
            Control Siemens 840 D
            total power requirement 57 kVA
            weight of the machine ca. 9,7 t
            Description :
            3-D control: Siemens 840 D Solutionline
            Main drive: motor spindle: 12000 rpm
            Power: 20 kW
            Tool holder: HSK-A 63 according to DIN 6983
            Tool changer: 80 magazine locations / double gripper
            NC rotary table with pallet carrier
            Rotary pallet changer: 2 pallets 500 x 500 mm with T-slots
            DIN 55201-A2
            Tool identification
            4-color signal lamp
            Production package: coolant system 980 liters, paper belt filter
            IKZ 40 bar / 23 l / min. through the spindle center (AD), roof flush
            Working space 300 l / min.
            Rotating lens
            Flushing gun with pump 2 bar / 40 l / min.
            Oil and emulsion mist separation system
            Electronic handwheel Siemens 840 D
            Siemens control panel for loading station.
            Tool magazine with TFT screen
            Direct linear measuring system in X, Y, Z-axis
            Dynamics package
            DMG MORI Netservice - on board
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal EUMACH UMC 1000


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05685 · Machining Center - Universal

          EUMACH - UMC 1000 - - August 2013 - Heidenhain iTNC 530

          Technical details
          x-travel 1000 mm︱y-travel 800 mm︱z-travel 700 mm︱Control Heidenhain iTNC 530 ︱total power requirement 60 kVA︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱
          5-axis universal machining center All tool holders including tools (each approx. 100 pieces) and the shrinking device «Haimer» for the tools. Reason for exemption: production task Purchase price in 2014 according to the order confirmation SFR 596.300, - First machine installation in 2015 Furnishing: CNC control Heidenhain iTNC 530 5-axis simultaneous interpolation Built-in high performance spindle Glass scales X, Y, Z axis Direct measurement of C and B axis Milling spindle Peron spindle P18, max. 18000 rpm. Spindle nose HSK-A63 Power 25/32 kW (S1-100% / S6-30 min.) Torque 124/154 Nm (S1-100% / S6-30 min.) Air through the spindle Internal coolant supply IKZ 40 bar Switchable from 40 to 20 bar 52-fold side tool changer HSK-A63 Automatic laser tool measurement Fracture monitoring Renishaw NC-4 with software toolset NC Version with transmitter-receiver separated) Tool length at least 110 mm from the spindle Renishaw RMP-60 touch probe with Software Inspection Plus Precision calibration device including calibration ball With holder and calibration software Heidenhain Kinematic Opt. 48, needs the Renishaw RMP-60 option Heidenhain 19 "color screen Heidenhain option DCM Interference monitoring and display of the machine with prevention of collision with machine parts.
            x-travel 1000 mm
            y-travel 800 mm
            z-travel 700 mm
            Control Heidenhain iTNC 530
            total power requirement 60 kVA
            weight of the machine ca. 15 t
            Description :
            5-axis universal machining center
            All tool holders including tools (each
            approx. 100 pieces) and the shrinking device «Haimer» for the tools.
            Reason for exemption: production task
            Purchase price in 2014 according to the order confirmation SFR 596.300, -
            First machine installation in 2015

            Furnishing:
            CNC control Heidenhain iTNC 530
            5-axis simultaneous interpolation
            Built-in high performance spindle
            Glass scales X, Y, Z axis
            Direct measurement of C and B axis
            Milling spindle Peron spindle P18, max. 18000 rpm.
            Spindle nose HSK-A63
            Power 25/32 kW (S1-100% / S6-30 min.)
            Torque 124/154 Nm (S1-100% / S6-30 min.)
            Air through the spindle
            Internal coolant supply IKZ 40 bar
            Switchable from 40 to 20 bar
            52-fold side tool changer HSK-A63
            Automatic laser tool measurement
            Fracture monitoring Renishaw NC-4 with software toolset NC
            Version with transmitter-receiver separated)
            Tool length at least 110 mm from the spindle
            Renishaw RMP-60 touch probe with Software Inspection Plus
            Precision calibration device including calibration ball
            With holder and calibration software Heidenhain Kinematic Opt. 48,
            needs the Renishaw RMP-60 option
            Heidenhain 19 "color screen
            Heidenhain option DCM
            Interference monitoring and display of the machine with prevention
            of collision with machine parts.
          Datasheet
          Request / Contact
          used  Machining Center - Universal QUASER MF 630C


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-H08361 · Machining Center - Universal

          QUASER - MF 630C - - 2015 - Siemens 828 D

          Technical details
          x-travel 800 mm︱y-travel 700 mm︱z-travel 610 mm︱Control Siemens 828 D ︱total power requirement kW︱weight of the machine ca. 8,7 t︱dimensions of the machine ca. m︱
          ONLY 2100 HOURS SPINDLE WORKS Description The QUASER MF vertical machining centres are highly versatile, offering high speed, high powered machining with 4+1 and full 5-axis machining capability along with large X-axis machines with a compact footprint. Superb build quality and stability for high volume production, toolroom and subcontract machining environments. Specification Table size 500mm diameter Travels – X/Y/Z axes 800 x 700 x 610 mm A Axis + 30 deg ~ -120 deg C Axis 360 deg continous Maximum swing 630 mm Table surface to spindle nose -25mm ~ 585mm Spindle nose to tilting centre at 90 deg -25mm ~ 585mm Maximum work piece of size 630mm dia x 300mm Table load capacity 300kg Spindle taper BT40 Spindle options 10,000 / 12,000 / 15,000rpm ATC – Standard 30 Station ATC – Option 48 / 60 Station Machine weight 8750kg Features: Multi-face machining centre Siemens 828 D CNC Control 630mm maximum swing dia x 300mm high 40 Taper spindle Spindle oil chiller or ECO Chiller 30 station ATC (Options available) Coolant wash gun Coolant wash down Chip augers Cutter air blast Worklight Machine status light
            x-travel 800 mm
            y-travel 700 mm
            z-travel 610 mm
            Control Siemens 828 D
            weight of the machine ca. 8,7 t
            Description :
            ONLY 2100 HOURS SPINDLE WORKS

            Description
            The QUASER MF vertical machining centres are highly versatile, offering high
            speed, high powered machining with 4+1 and full 5-axis machining capability
            along with large X-axis machines with a compact footprint. Superb build quality
            and stability for high volume production, toolroom and subcontract machining
            environments.

            Specification
            Table size 500mm diameter
            Travels – X/Y/Z axes 800 x 700 x 610 mm
            A Axis + 30 deg ~ -120 deg
            C Axis 360 deg continous
            Maximum swing 630 mm
            Table surface to spindle nose -25mm ~ 585mm
            Spindle nose to tilting centre at 90 deg -25mm ~ 585mm
            Maximum work piece of size 630mm dia x 300mm
            Table load capacity 300kg
            Spindle taper BT40
            Spindle options 10,000 / 12,000 / 15,000rpm
            ATC – Standard 30 Station
            ATC – Option 48 / 60 Station
            Machine weight
            8750kg
            Features:
            Multi-face machining centre
            Siemens 828 D CNC Control
            630mm maximum swing dia x 300mm high
            40 Taper spindle
            Spindle oil chiller or ECO Chiller
            30 station ATC (Options available)
            Coolant wash gun
            Coolant wash down
            Chip augers
            Cutter air blast
            Worklight
            Machine status light

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          •   
          •   

            Trader Profile:   Knops Werkzeugmaschinen
          GmbH & Co. KG

          Contact Trader



            Knops Werkzeugmaschinen
          GmbH & Co. KG

           Ronsdorfer Str. 143
            40233 Düsseldorf
            Deutschland
            0211 8793140">0211 8793140
            0211 8793134
            maschinen@knops.de
            www.knops.de

          Profile of Trader




          Knops Werkzeugmaschinen GmbH  &  Co. KG  40233 Düsseldorf Ronsdorfer Str. 143 Deutschland
          Knops Werkzeugmaschinen GmbH & Co. KG

          Ronsdorfer Str. 143



          Contact Trader


            Knops Werkzeugmaschinen GmbH & Co. KG
           Ronsdorfer Str. 143
            40233 Düsseldorf
            Deutschland
            0211 8793140
            0211 8793134
            maschinen@knops.de
            www.knops.de
            Contact person:

           




          Machine category


          Abkantpresse - hydraulisch · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bettfräsmaschine - Universal · Blechrundbiegemaschine - 3 Walzen · Blechrundbiegemaschine - 4 Walzen · Brennschneidemaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppelscheibenschleifmaschine · Doppelständer - Kurbelpresse · Drehmaschine - zyklengesteuert · Ersatzteile · Fahrständerfräsmaschine · Fixatoren · Flachschleifmaschine - Doppelständer · Flachschleifmaschine - Horizontal · Flanschenbohrmaschine · Fräseinrichtung · Hydraulische - Doppelständerziehpresse · Innenschleifmaschine · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Keilnutenziehmaschine · Keilwellenschleifmaschine · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Mehrspindelstangenautomat · Messmaschine · Plan- und Spitzendrehbank · Planscheibe · Plattenbohrwerk - Horizontal · Plattenbohrwerk - Traghülse · Portal - Bearbeitungszentrum · Portal - Langhobelmaschine · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Rundschleifmaschine - Universal · Rundtaktmaschine · Rundtisch · Rundtischflächenschleifmaschine - Horiz. · Schnellradialbohrmaschine · Schweißdrehtisch - rund · Schwerdrehmaschine · Senkerodiermaschine · Spindelschlagpresse · Tafelschere - hydraulisch · Tieflochbohrmaschine · Tischbohrwerk · Trennschleifautomat · Vertikale - Flachschleifmaschine · Verzahnungsmeßmaschine · Walzenschleifmaschine · Werkzeug Voreinstellgerät · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradschleifmaschine · Zubehör ·