European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH - Stockist for used machines

          Machinelist:


          CNC Lathe

          used  CNC Lathe HARRISON ALPHA 460 Plus


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-49410 · CNC Lathe

          HARRISON - ALPHA 460 Plus - - 1998 -

          Technical details
          turning diameter 460 mm︱turning length 1500 mm︱control Fanuc ︱turning diameter over bed slide 270 mm︱greates pass round over bed 460 mm︱max. swing-dia. in gap Ø 730 x 213 mm︱spindle bore diameter 76 mm︱turning speed range 155- 2000 U/min︱rapid speed 3 m/min︱number of tapers in turret head 4 RD 2 PARAT︱tail stock Ja MK︱power requirement 11/7,5 kW︱weight of the machine ca. 2,9 t︱dimensions 3,2 x 1,65 x 1,72 m︱
          Cycle-CNC-Lathe in good condition. Equipment: - Coolantsystem - PARAT toolholder head manual toolchanger - some Parat tool holders - 3- jaw chuck Röhm Ø 315 mm - Alpha link software - 3- point steady Ø 230 mm
            turning diameter 460 mm
            turning length 1500 mm
            control Fanuc
            turning diameter over bed slide 270 mm
            greates pass round over bed 460 mm
            max. swing-dia. in gap Ø 730 x 213 mm
            spindle bore diameter 76 mm
            turning speed range 155- 2000 U/min
            rapid speed 3 m/min
            number of tapers in turret head 4 RD 2 PARAT
            tail stock Ja MK
            power requirement 11/7,5 kW
            weight of the machine ca. 2,9 t
            dimensions 3,2 x 1,65 x 1,72 m
            Description :
            Cycle-CNC-Lathe in good condition.

            Equipment:

            - Coolantsystem
            - PARAT toolholder head manual toolchanger
            - some Parat tool holders
            - 3- jaw chuck Röhm Ø 315 mm
            - Alpha link software
            - 3- point steady Ø 230 mm
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center HWACHEON HiEco 45 MC (HiTech 700)


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-45410 · CNC Turning- and Milling Center

          HWACHEON - HiEco 45 MC (HiTech 700) - - 2003 - Fanuc 18- TB

          Technical details
          turning diameter 700 mm︱turning length 2000 mm︱control Fanuc 18- TB ︱spindle passage 115 mm︱spindle nose A 2-11 ︱number of spindle speeds 1800 U/min︱spindle motor 30/37 kW︱max. torque on the spindle 3070 Nm︱Number of tools 12 BMT︱driven stations 6 BMT︱speed of driven tools 3000 U/min︱power of driven tools 3,7/ 5,5 kw︱rapid traverse 24 m/min︱tail stock MK 5; Ø 150 mm︱range L-W-H 6.000 x 2.370 x 2.750 mm︱weight of the machine ca. 16 t︱
          CNC- lathe with driven tools and steady - tool measuring - chip conveyor - hydr. steady SMW SLU 4 (Ø 50- 260 mm) - 6 bar coolant - 3- jaw chuck Kitagawa B 15 - 1 + 1 driven tool - some std. tooling - box way all axis
            turning diameter 700 mm
            turning length 2000 mm
            control Fanuc 18- TB
            spindle passage 115 mm
            spindle nose A 2-11
            number of spindle speeds 1800 U/min
            spindle motor 30/37 kW
            max. torque on the spindle 3070 Nm
            Number of tools 12 BMT
            driven stations 6 BMT
            speed of driven tools 3000 U/min
            power of driven tools 3,7/ 5,5 kw
            rapid traverse 24 m/min
            tail stock MK 5; Ø 150 mm
            range L-W-H 6.000 x 2.370 x 2.750 mm
            weight of the machine ca. 16 t
            Description :
            CNC- lathe with driven tools and steady

            - tool measuring - chip conveyor
            - hydr. steady SMW SLU 4 (Ø 50- 260 mm) - 6 bar coolant
            - 3- jaw chuck Kitagawa B 15 - 1 + 1 driven tool
            - some std. tooling - box way all axis
          62.500 €
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center OKUMA Mac Turn 250 W


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-45310 · CNC Turning- and Milling Center

          OKUMA - Mac Turn 250 W - - 2002 - OSP U 100 L

          Technical details
          turning diameter 530 mm︱turning length 1000 mm︱swing dia. 550 mm︱control OSP U 100 L ︱spindle bore 22/15 kW︱power capacity 38 - 3800 U/min︱spindle hollow 65 mm︱turning speed range 30/40/26 m/min︱number of tapers in turret head 7,5 kW︱power capacity - milling spindle 15 - 6000 U/min︱turning speed range - milling HSK 63 A ︱tool taper 44 Stück︱numbers of tools in magazin +80/-80 mm︱tail stock Gegenspindel/ sub spindle ︱speeds spindle 2 6000 U/min︱b-axis 210 °︱weight of the machine ca. 12,5 t︱dimensions 7,3 x 2,8 x 2,73 m︱
          7- Axis Turning/ Milling Centre with Milling head, sub spindle and barfeed magazin - milling head with b- axis 1° - Big Bore main spindle - sub spindle - b-axis 1° - chip conveyor - Touch Setter - IGF One Touch dialog programming - 3- jaw chuck Ø 250 mm main spindle - 3 jaw chuck Ø 150 mm sub spindel - Oil cooler - RotoClean - short barfeed magazin - parts catcher - hand wheel First Instalation 2004
            turning diameter 530 mm
            turning length 1000 mm
            swing dia. 550 mm
            control OSP U 100 L
            spindle bore 22/15 kW
            power capacity 38 - 3800 U/min
            spindle hollow 65 mm
            turning speed range 30/40/26 m/min
            number of tapers in turret head 7,5 kW
            power capacity - milling spindle 15 - 6000 U/min
            turning speed range - milling HSK 63 A
            tool taper 44 Stück
            numbers of tools in magazin +80/-80 mm
            tail stock Gegenspindel/ sub spindle
            speeds spindle 2 6000 U/min
            b-axis 210 °
            weight of the machine ca. 12,5 t
            dimensions 7,3 x 2,8 x 2,73 m
            Description :
            7- Axis Turning/ Milling Centre with Milling head, sub spindle and barfeed
            magazin

            - milling head with b- axis 1°
            - Big Bore main spindle
            - sub spindle
            - b-axis 1°
            - chip conveyor
            - Touch Setter
            - IGF One Touch dialog programming
            - 3- jaw chuck Ø 250 mm main spindle
            - 3 jaw chuck Ø 150 mm sub spindel
            - Oil cooler
            - RotoClean
            - short barfeed magazin
            - parts catcher
            - hand wheel

            First Instalation 2004
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center OKUMA Mac Turn 30- 1 SC 1000


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-46410 · CNC Turning- and Milling Center

          OKUMA - Mac Turn 30- 1 SC 1000 - - 1999 -

          Technical details
          turning diameter 500 mm︱turning length 1000 mm︱swing dia. 500 mm︱control OSP 7000 ︱spindle bore 22/15 kW︱power capacity 38 - 3800 U/min︱spindle hollow 72 mm︱turning speed range 20/12/25 m/min︱number of tapers in turret head 6,8/5,5 kW︱power capacity - milling spindle 100 - 6000 U/min︱turning speed range - milling BT 40 ︱tool taper 40 Stück︱numbers of tools in magazin 190 mm︱tail stock MK 5 ︱b-axis 1 °︱weight of the machine ca. 11,0 t︱dimensions 5,6 x 2,5 x 2,36 m︱
          5- Axis Turning/ Milling Centre with Milling head. - milling head with b- axis - Big Bore main spindle A2-8 - chip conveyor - Touch Setter - IGF One Touch dialog programming - 3- jaw chuck Ø 250 mm main spindle - hydr. steady SMW SLU 3.1 - programable tailstock - helicall cutting - syncro. tapping
            turning diameter 500 mm
            turning length 1000 mm
            swing dia. 500 mm
            control OSP 7000
            spindle bore 22/15 kW
            power capacity 38 - 3800 U/min
            spindle hollow 72 mm
            turning speed range 20/12/25 m/min
            number of tapers in turret head 6,8/5,5 kW
            power capacity - milling spindle 100 - 6000 U/min
            turning speed range - milling BT 40
            tool taper 40 Stück
            numbers of tools in magazin 190 mm
            tail stock MK 5
            b-axis 1 °
            weight of the machine ca. 11,0 t
            dimensions 5,6 x 2,5 x 2,36 m
            Description :
            5- Axis Turning/ Milling Centre with Milling head.
            - milling head with b- axis
            - Big Bore main spindle A2-8
            - chip conveyor
            - Touch Setter
            - IGF One Touch dialog programming
            - 3- jaw chuck Ø 250 mm main spindle
            - hydr. steady SMW SLU 3.1
            - programable tailstock
            - helicall cutting
            - syncro. tapping

          Datasheet
          Request / Contact

          Turning Automatic Lathe - swiss lathe

          used  Turning Automatic Lathe - swiss lathe CITIZEN E 32 IV


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-49610 · Turning Automatic Lathe - swiss lathe

          CITIZEN - E 32 IV - - 2000 - Mitsubishi Meldas 530 LHC

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 250 in einem Zug mm︱bar material dia. 32 mm︱control Mitsubishi Meldas 530 LHC ︱number of controlled axis 7 ︱turning speed range 8000 U/min︱power requirement 5,5 kW︱Subspindel speed range 6000 U/min︱power requirement 2,2 kW︱number of tapers in turret head 10(20) + 10(20) ︱Spindel speed of driven tools 5000 U/min︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 7,0 x 1,9 x 1,9 m︱
          Sliding headstock lathe with 2 turrets, 1x Y- axis, driven tools and subspindle in very good condition. (medicine tetechnology) Equipment: - barfeeder-magazin FMB Turbo 5-42/3200 - chipconveyor - some collets - driven toolholders - fixed toolholders - 10/20 positions/turret - 1x Y- axis - well equipped
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 250 in einem Zug mm
            bar material dia. 32 mm
            control Mitsubishi Meldas 530 LHC
            number of controlled axis 7
            turning speed range 8000 U/min
            power requirement 5,5 kW
            Subspindel speed range 6000 U/min
            power requirement 2,2 kW
            number of tapers in turret head 10(20) + 10(20)
            Spindel speed of driven tools 5000 U/min
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 7,0 x 1,9 x 1,9 m
            Description :
            Sliding headstock lathe with 2 turrets, 1x Y- axis, driven tools
            and subspindle in very good condition. (medicine tetechnology)
            Equipment:
            - barfeeder-magazin FMB Turbo 5-42/3200
            - chipconveyor
            - some collets
            - driven toolholders
            - fixed toolholders
            - 10/20 positions/turret
            - 1x Y- axis
            - well equipped
          Datasheet
          Request / Contact
          used  Turning Automatic Lathe - swiss lathe CITIZEN E 32 IV 3M4


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-49710 · Turning Automatic Lathe - swiss lathe

          CITIZEN - E 32 IV 3M4 - - 1998 - Mitsubishi Meldas 530 LHC

          Technical details
          turning diameter over bed 32 mm︱spindle passage 32 mm︱turning length 250 in einem Zug mm︱bar material dia. 32 mm︱control Mitsubishi Meldas 530 LHC ︱number of controlled axis 7 ︱turning speed range 8000 U/min︱power requirement 5,5 kW︱Subspindel speed range 6000 U/min︱power requirement 2,2 kW︱number of tapers in turret head 10(20) + 10(20) ︱Spindel speed of driven tools 5000 U/min︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 7,0 x 1,9 x 1,9 m︱
          Sliding headstock lathe with 2 turrets, 1x Y- axis, driven tools and subspindle in very good condition. (medicine tetechnology) Equipment: - barfeeder-magazin FMB Turbo 5-42 - chipconveyor - some collets - driven toolholders - fixed toolholders - 10/20 positions/turret - 1x Y- axis - well equipped
            turning diameter over bed 32 mm
            spindle passage 32 mm
            turning length 250 in einem Zug mm
            bar material dia. 32 mm
            control Mitsubishi Meldas 530 LHC
            number of controlled axis 7
            turning speed range 8000 U/min
            power requirement 5,5 kW
            Subspindel speed range 6000 U/min
            power requirement 2,2 kW
            number of tapers in turret head 10(20) + 10(20)
            Spindel speed of driven tools 5000 U/min
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 7,0 x 1,9 x 1,9 m
            Description :
            Sliding headstock lathe with 2 turrets, 1x Y- axis, driven tools
            and subspindle in very good condition. (medicine tetechnology)
            Equipment:
            - barfeeder-magazin FMB Turbo 5-42
            - chipconveyor
            - some collets
            - driven toolholders
            - fixed toolholders
            - 10/20 positions/turret
            - 1x Y- axis
            - well equipped
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal DECKEL DMG DMC 125 U


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-39611 · Machining Center - Universal

          DECKEL DMG - DMC 125 U - - 1999 -

          Technical details
          x-travel 1250 mm︱y-travel 880 mm︱z-travel 800 mm︱control Heidenhain MillPlus ︱rapid speed 40 m/min︱feed speeds 15.000 | mm/min |︱table surface area 1000 x 800 mm︱table rotating 360.000 x 0,001 °︱table load 1,5 t︱numbers of pallets 2 Stück︱milling-head swivable +/- horizontal/vertikal ︱turning speed range 0 - 8.000 U/min︱tool taper SK 50 | |︱power capacity - milling spindle 28 / 19 kW︱no. of tools in the magazine 120 Stück︱weight of the machine ca. 15 t︱dimensions of the machine ca. m︱
          Universal Milling Center with high accuracy and pallet changer in good condition. Equipment: - swivelling head horizontal / vertical - chipconveyor - electronic pulshandle - high pressure coolant system 900 l through the spindle - 3D-control - Heidenhain TS 631 Probe - one extra pallet
            x-travel 1250 mm
            y-travel 880 mm
            z-travel 800 mm
            control Heidenhain MillPlus
            rapid speed 40 m/min
            feed speeds 15.000 | mm/min |
            table surface area 1000 x 800 mm
            table rotating 360.000 x 0,001 °
            table load 1,5 t
            numbers of pallets 2 Stück
            milling-head swivable +/- horizontal/vertikal
            turning speed range 0 - 8.000 U/min
            tool taper SK 50 | |
            power capacity - milling spindle 28 / 19 kW
            no. of tools in the magazine 120 Stück
            weight of the machine ca. 15 t
            Description :
            Universal Milling Center with high accuracy and pallet changer in good
            condition.
            Equipment:
            - swivelling head horizontal / vertical
            - chipconveyor
            - electronic pulshandle
            - high pressure coolant system 900 l through the spindle
            - 3D-control
            - Heidenhain TS 631 Probe
            - one extra pallet
          Datasheet
          Request / Contact

          Machining Center - Vertical

          used  Machining Center - Vertical SMTCL VMC 1100 B


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-38211 · Machining Center - Vertical

          SMTCL - VMC 1100 B - - 2015 - Siemens 828 D

          Technical details
          x-travel 1100 mm︱y-travel 610 mm︱z-travel 650 mm︱table surface area 1300 x 610 mm︱control Siemens 828 D ︱rapid traverse 32/32/30 m/min︱table load t︱turning speed range 10.000 U/min︱max. torque on the spindle Nm︱power capacity - milling spindle kW︱internal coolant system feed 20 bar︱no. of tools in the magazine 24 Stück︱tool taper SK 40 ︱weight of the machine ca. 6 t︱dimensions 4,2 x 2,2 x 2,7 m︱
          CNC- vertical machining centre. First instalation in 2017. - coolant through the spindel 20 bar with filter - chip conveyor - spindle oil cooler - external hand wheel - Siemens with Shop Mill
            x-travel 1100 mm
            y-travel 610 mm
            z-travel 650 mm
            table surface area 1300 x 610 mm
            control Siemens 828 D
            rapid traverse 32/32/30 m/min
            turning speed range 10.000 U/min
            internal coolant system feed 20 bar
            no. of tools in the magazine 24 Stück
            tool taper SK 40
            weight of the machine ca. 6 t
            dimensions 4,2 x 2,2 x 2,7 m
            Description :
            CNC- vertical machining centre. First instalation in 2017.

            - coolant through the spindel 20 bar with filter
            - chip conveyor
            - spindle oil cooler
            - external hand wheel
            - Siemens with Shop Mill

          Datasheet
          Request / Contact
          used  Machining Center - Vertical CHIRON FZ 08 W


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-40311 · Machining Center - Vertical

          CHIRON - FZ 08 W - - 2001 - Fanuc 21i- M

          Technical details
          x-travel 300 mm︱y-travel 250 mm︱z-travel 250 mm︱control Fanuc 21i- M ︱table surface area 2x 550 x 300 mm︱rapid traverse 40/40/60 m/min︱table load 75 kg︱turning speed range 20- 15000 U/min︱max. torque on the spindle 23 Nm︱power capacity - milling spindle 7,4 kW︱tool taper HSK- A32 |︱no. of tools in the magazine 12 Stück︱weight 2,2 t︱dimensions 2,5 x 1,3 x 2,1 m︱
          Equipment: - chipconveyor - some toolholders HSK- A32 - dual pallet changer (180° movement) - coolant system - steel drilling: Ø 16 mm/ M 12 - hydraulic plugs for automatic clamping
            x-travel 300 mm
            y-travel 250 mm
            z-travel 250 mm
            control Fanuc 21i- M
            table surface area 2x 550 x 300 mm
            rapid traverse 40/40/60 m/min
            table load 75 kg
            turning speed range 20- 15000 U/min
            max. torque on the spindle 23 Nm
            power capacity - milling spindle 7,4 kW
            tool taper HSK- A32 |
            no. of tools in the magazine 12 Stück
            weight 2,2 t
            dimensions 2,5 x 1,3 x 2,1 m
            Description :
            Equipment:

            - chipconveyor
            - some toolholders HSK- A32
            - dual pallet changer (180° movement)
            - coolant system
            - steel drilling: Ø 16 mm/ M 12
            - hydraulic plugs for automatic clamping
          Datasheet
          Request / Contact

          Universal Milling and Boring Machine

          used  Universal Milling and Boring Machine DECKEL FP1


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-7113 · Universal Milling and Boring Machine

          DECKEL - FP1 - - ca. 1965 -

          Technical details
          x-travel 300 mm︱y-travel 150 mm︱z-travel 340 mm︱table-size 600 x 210 mm︱tool adaptor ISO 40 | |︱feed speeds 9,5 - 475 mm/min |︱turning speed range 60- 1900 U/min︱power requirement 1,5 kW︱quill stroke 60 mm︱dimensions 1,0 x 1,2 x 1,73 m︱weight of the machine ca. 0,6 t︱
          used universal milling machine - coolant system - 2 axis digital scale Sony - some tool holders - machine light
            x-travel 300 mm
            y-travel 150 mm
            z-travel 340 mm
            table-size 600 x 210 mm
            tool adaptor ISO 40 | |
            feed speeds 9,5 - 475 mm/min |
            turning speed range 60- 1900 U/min
            power requirement 1,5 kW
            quill stroke 60 mm
            dimensions 1,0 x 1,2 x 1,73 m
            weight of the machine ca. 0,6 t
            Description :
            used universal milling machine

            - coolant system
            - 2 axis digital scale Sony
            - some tool holders
            - machine light
          Datasheet
          Request / Contact
          used  Universal Milling and Boring Machine DECKEL FP 4- 60 T


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-10212 · Universal Milling and Boring Machine

          DECKEL - FP 4- 60 T - - 1994 - Dialog 11

          Technical details
          x-travel 600 mm︱y-travel 500 mm︱z-travel 450 mm︱control Dialog 11 ︱turning speed range - main spindle 31,5-5.000 U/min︱power capacity - main spindel 7,5 kW︱tool taper SK 40 ︱table surface area Ø 500 mm︱Tool-Presetter: 30 Stück︱feeds: ︱rapid travel ( X / Y / Z ) 6 m / min. m/min︱weight of the machine ca. 4,3 t︱dimensions of the machine ca. 3,5 x 2,4 x 2,2 L/B/H m︱
          Universal Milling- and Boring Machine - full covered - coolant system - NC- rotary table - tool changer
            x-travel 600 mm
            y-travel 500 mm
            z-travel 450 mm
            control Dialog 11
            turning speed range - main spind. 31,5-5.000 U/min
            power capacity - main spindel 7,5 kW
            tool taper SK 40
            table surface area Ø 500 mm
            Tool-Presetter: 30 Stück
            rapid travel ( X / Y / Z ) 6 m / min. m/min
            weight of the machine ca. 4,3 t
            dimensions of the machine ca. 3,5 x 2,4 x 2,2 L/B/H m
            Description :
            Universal Milling- and Boring Machine

            - full covered
            - coolant system
            - NC- rotary table
            - tool changer
          9.900 €
          Datasheet
          Request / Contact

          Band Saw - Automatic

          used  Band Saw - Automatic Wagner WPB 520 A


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-7017 · Band Saw - Automatic

          Wagner - WPB 520 A - - 2003 -

          Technical details
          cutting diameter Ø 520/ 520 x 520 mm︱saw band length 7250 x 50 mm︱cutting width 1,6 mm︱cutting speed 16- 90 m/min︱power requirement 11 kW︱dimensions m︱feed in one step 520 mm︱multiple feeding length 2080 mm︱feed speeds infinitely variable 0- 400 mm/min︱weight of the machine ca. 3,5 t︱
            cutting diameter Ø 520/ 520 x 520 mm
            saw band length 7250 x 50 mm
            cutting width 1,6 mm
            cutting speed 16- 90 m/min
            power requirement 11 kW
            feed in one step 520 mm
            multiple feeding length 2080 mm
            feed speeds infinitely variable 0- 400 mm/min
            weight of the machine ca. 3,5 t
          Datasheet
          Request / Contact

          Clamping Cube

          used  Clamping Cube UNBEKANNT


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-5521 · Clamping Cube

          UNBEKANNT - - - 2000 -

          Technical details
          length 140 mm︱width 140 mm︱height 500 mm︱weight of the machine ca. 0,1 t︱
          clamping cube for machining centre , 4 pcs. available. price per piece There is a socket of 300 x 200 x 120 mm, totaly hight 620 mm
            length 140 mm
            width 140 mm
            height 500 mm
            weight of the machine ca. 0,1 t
            Description :
            clamping cube for machining centre , 4 pcs. available. price per piece

            There is a socket of 300 x 200 x 120 mm, totaly hight 620 mm
          Datasheet
          Request / Contact

          toolholder

          used  toolholder OKUMA WTO K 96.2013.1


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-5531 · toolholder

          OKUMA WTO - K 96.2013.1 - - unbekannt -

          Technical details
          tool taper VDI 40 ︱shaft cross cut 40 mm︱shaft length 92 mm︱ratio 1:1 ︱turning speeds 4000 U/min︱coolant ja / yes
          Used driven tool for Okuma (LT 25 M) 2 pices available! - 2 Spindles for main- and sub spindle - coolets E 25 - ext. coolant - X= 100 mm ( surface- middle of tool) - hight 141 mm
            tool taper VDI 40
            shaft cross cut 40 mm
            shaft length 92 mm
            ratio 1:1
            turning speeds 4000 U/min
            coolant ja / yes
            Description :
            Used driven tool for Okuma (LT 25 M)
            2 pices available!

            - 2 Spindles for main- and sub spindle
            - coolets E 25
            - ext. coolant
            - X= 100 mm ( surface- middle of tool)
            - hight 141 mm
          Datasheet
          Request / Contact

          Toolholder

          used  Toolholder ROSENBOOM Werkzeugwagen


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-155 · Toolholder

          ROSENBOOM - Werkzeugwagen - - 2020 -

          Technical details
          Number of tools 36 St.︱dimensions 0,72 x 0,56x 0,95 m︱weight 27 kg︱
          New movable tool trolley for toolholders with 40' taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
            Number of tools 36 St.
            dimensions 0,72 x 0,56x 0,95 m
            weight 27 kg
            Description :
            New movable tool trolley for toolholders with 40' taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
          Datasheet
          Request / Contact
          used  Toolholder ROSENBOOM Werkzeugwagen


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-1355 · Toolholder

          ROSENBOOM - Werkzeugwagen - - 2020 -

          Technical details
          Number of tools 30 St.︱dimensions 0,72 x 0,56x 0,95 m︱weight 27 kg︱
          New movable tool trolley for toolholders with 50' taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.
            Number of tools 30 St.
            dimensions 0,72 x 0,56x 0,95 m
            weight 27 kg
            Description :
            New movable tool trolley for toolholders with 50' taper. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.

          Datasheet
          Request / Contact

          Vise

          used  Vise SCHRAUBSTOCK HYD. Hydraulisch


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-555 · Vise

          SCHRAUBSTOCK HYD. - Hydraulisch - - 1990 -

          Technical details
          thickness of jaw 200 mm︱weight of the machine ca. 100 kg︱distance of clamping jaw max. 420 mm︱dimensions of the machine ca. 700 x 230 x 170 mm cm︱
            thickness of jaw 200 mm
            weight of the machine ca. 100 kg
            distance of clamping jaw max. 420 mm
            dimensions of the machine ca. 700 x 230 x 170 mm cm
          Datasheet
          Request / Contact
          used  Vise OML Nullpunktspannsystem 140 APS- E APS-I


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-3055 · Vise

          OML Nullpunktspannsystem - 140 APS- E APS-I - - -

          Technical details
          thickness of jaw 130 mm︱base plate 760 x 350 mm︱flute distance 100 mm︱distance between the rotary tables 200 mm︱positions 6 ︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 760 x 600 mm︱
          used Zero point clamping system - groundplate with 6 stations - 2x hydraulice vice OML VP 130 - pneumatic aktivation - coverplates for two stations
            thickness of jaw 130 mm
            base plate 760 x 350 mm
            flute distance 100 mm
            distance between the rotary tabl. 200 mm
            positions 6
            weight of the machine ca. 0,2 t
            dimensions of the machine ca. 760 x 600 mm
            Description :
            used Zero point clamping system

            - groundplate with 6 stations
            - 2x hydraulice vice OML VP 130
            - pneumatic aktivation
            - coverplates for two stations
          Datasheet
          Request / Contact

          Compressors

          used  Compressors Michelin MCX 596/300 N


          • Klaus Rosenboom GmbH
          • Oppenheimer Str. 19
          • 28307 Bremen

          • +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
          • info@rosenboom-wzm.de
            www.rosenboom-wzm.de
          #1021-1431 · Compressors

          Michelin - MCX 596/300 N - - 2018 -

          Technical details
          feed pressure 10 bar︱Effective free air delivery 600 L/min︱Receiver capacity 270/10 l / bar︱weight of the machine ca. 215 kg.︱Number of cylinders 2 Stk.︱motor 400/5,5 V / KW︱range L-W-H 1,6 x 0,6 x 1,3 mm︱
          Silenced Compressor condition like new. (Only 1.525 h) - max. tank pressure 13 bar - appr. 66 dB - run time only 1.525 h
            feed pressure 10 bar
            Effective free air delivery 600 L/min
            Receiver capacity 270/10 l / bar
            weight of the machine ca. 215 kg.
            Number of cylinders 2 Stk.
            motor 400/5,5 V / KW
            range L-W-H 1,6 x 0,6 x 1,3 mm
            Description :
            Silenced Compressor condition like new. (Only 1.525 h)

            - max. tank pressure 13 bar
            - appr. 66 dB
            - run time only 1.525 h
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH  28307 - Bremen Oppenheimer Str. 19
          Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH

          Oppenheimer Str. 19



          Contact Trader


            Klaus Rosenboom GmbH Werkzeugmaschinen-Handel GmbH
           Oppenheimer Str. 19
            28307 - Bremen
           
            +49 (0) 4 21 / 33 30 10
            +49 (0) 4 21 / 48 70 45
            info@rosenboom-wzm.de
            www.rosenboom-wzm.de
            Contact person:

           




          Machine category


          Aufspannwürfel · Bandsäge - Automatisch · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Kompressoren · Langdrehautomat · Schraubstock · Universal-Fräs- und Bohrmaschine · Werkzeughalter · Werkzeughalter (angetrieben) ·