European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Amann Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe BOEHRINGER DUE 630


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17591 · Center Lathe

          BOEHRINGER - DUE 630 - - 1988 -

          Technical details
          turning diameter over bed 630 mm︱turning diameter over slide rest 385 mm︱turning length 1250 mm︱speeds 9 - 1800 U/min︱spindle passage 82 mm︱tailstock quill taper MT 6 ︱total power requirement 22 kW︱weight of the machine ca. 5 t︱dimensions of the machine ca. 3,6 x 1,9 x 2,2 m︱
          The cross slide has been completely redesigned. Scraping of all sliding surfaces plus doubling of the wedge. Rapid traverse longitudinal / plan Digital display Heidenhain ND780 Three-jaw chuck Forkardt 315 mm Multifix size CD some steel holder cassettes Fixed 3 - point steady rest Ø315 mm Machine light Coolant pump Stainless steel floor pan
            turning diameter over bed 630 mm
            turning diameter over slide rest 385 mm
            turning length 1250 mm
            speeds 9 - 1800 U/min
            spindle passage 82 mm
            tailstock quill taper MT 6
            total power requirement 22 kW
            weight of the machine ca. 5 t
            dimensions of the machine ca. 3,6 x 1,9 x 2,2 m
            Description :
            The cross slide has been completely redesigned.
            Scraping of all sliding surfaces plus doubling of the wedge.
            Rapid traverse longitudinal / plan
            Digital display Heidenhain ND780
            Three-jaw chuck Forkardt 315 mm
            Multifix size CD
            some steel holder cassettes
            Fixed 3 - point steady rest Ø315 mm
            Machine light
            Coolant pump
            Stainless steel floor pan
          Datasheet
          Request / Contact

          CNC Lathe

          used  CNC Lathe WEISSER Univertor AS 400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17367 · CNC Lathe

          WEISSER - Univertor AS 400 - - 2008 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 400 mm︱control Siemens 840 D ︱swing diameter max. 300 mm︱workpiece length - max. 400 mm︱travel -x axis 280 mm︱feed in x - axis 0,1 - 30 m/min︱rapid traverse X-axis 30 m/min︱travel -z axis 1150 mm︱feed range Z-direction 0,1 - 60000 mm/min︱rapid traverse Z-axis 60 m/min︱spindle bearing diameter 90 mm︱spindle head DIN 55026 - Size A6 ︱turning speeds 1 - 5000 U/min︱tool turret 12 times C4 Capto︱total power requirement 45 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 7,0 x 5,0 x 3,2 m︱
          CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.
            turning diameter 250 mm
            turning length 400 mm
            control Siemens 840 D
            swing diameter max. 300 mm
            workpiece length - max. 400 mm
            travel -x axis 280 mm
            feed in x - axis 0,1 - 30 m/min
            rapid traverse X-axis 30 m/min
            travel -z axis 1150 mm
            feed range Z-direction 0,1 - 60000 mm/min
            rapid traverse Z-axis 60 m/min
            spindle bearing diameter 90 mm
            spindle head DIN 55026 - Size A6
            turning speeds 1 - 5000 U/min
            tool turret 12 times C4 Capto
            total power requirement 45 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 7,0 x 5,0 x 3,2 m
            Description :
            CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor
            with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm;
            12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring;
            Pickup-loading incl. conveyor.
            Without coolant system, was connected to central supply.
            Machine can be inspected under power.


          Datasheet
          Request / Contact
          used  CNC Lathe WEISSER Univertor AS 400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17366 · CNC Lathe

          WEISSER - Univertor AS 400 - - 2008 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 400 mm︱control Siemens 840 D ︱swing diameter max. 300 mm︱workpiece length - max. 400 mm︱travel -x axis 280 mm︱feed in x - axis 0,1 - 30 m/min︱rapid traverse X-axis 30 m/min︱travel -z axis 1150 mm︱feed range Z-direction 0,1 - 60000 mm/min︱rapid traverse Z-axis 60 m/min︱spindle bearing diameter 90 mm︱spindle head DIN 55026 - Size A6 ︱turning speeds 1 - 5000 U/min︱tool taper Capto C4 ︱total power requirement 45 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 7,0 x 5,0 x 3,2 m︱
          CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.
            turning diameter 250 mm
            turning length 400 mm
            control Siemens 840 D
            swing diameter max. 300 mm
            workpiece length - max. 400 mm
            travel -x axis 280 mm
            feed in x - axis 0,1 - 30 m/min
            rapid traverse X-axis 30 m/min
            travel -z axis 1150 mm
            feed range Z-direction 0,1 - 60000 mm/min
            rapid traverse Z-axis 60 m/min
            spindle bearing diameter 90 mm
            spindle head DIN 55026 - Size A6
            turning speeds 1 - 5000 U/min
            tool taper Capto C4
            total power requirement 45 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 7,0 x 5,0 x 3,2 m
            Description :
            CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor
            with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm;
            12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring;
            Pickup-loading incl. conveyor.
            Without coolant system, was connected to central supply.
            Machine can be inspected under power.


          Datasheet
          Request / Contact
          used  CNC Lathe WEISSER Univertor AS 400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17365 · CNC Lathe

          WEISSER - Univertor AS 400 - - 2005 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 400 mm︱control Siemens 840 D ︱swing diameter max. 300 mm︱travel -x axis 280 mm︱feed x-axis 0,1 - 30.000 mm/min︱rapid traverse X-axis 30 m/min︱travel -z axis 1.150 mm︱Feed z- axis 0,1 - 60.000 mm / min.︱rapid traverse Z-axis 60 m/min︱spindle bearing diameter 90 mm︱spindle head DIN 55026 - Size A6 ︱turning speeds 1 - 5.000 U/min︱tool turret - number of stations 12 ︱tool taper Capto C4 ︱total power requirement 45 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 7,0 x 5,0 x 3,2 m︱
          CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm; 12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring; Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.
            turning diameter 250 mm
            turning length 400 mm
            control Siemens 840 D
            swing diameter max. 300 mm
            travel -x axis 280 mm
            feed x-axis 0,1 - 30.000 mm/min
            rapid traverse X-axis 30 m/min
            travel -z axis 1.150 mm
            Feed z- axis 0,1 - 60.000 mm / min.
            rapid traverse Z-axis 60 m/min
            spindle bearing diameter 90 mm
            spindle head DIN 55026 - Size A6
            turning speeds 1 - 5.000 U/min
            tool turret - number of stations 12
            tool taper Capto C4
            total power requirement 45 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 7,0 x 5,0 x 3,2 m
            Description :
            CNC lathe with SIEMENS SINUMERIK 840D control; Screw conveyor
            with chip breaker and return pumping station; NC-steady SMW-SLU-1-OLD Ø10-70mm;
            12-fold tool turret SAUTER 0.5.460.220; NC tailstock; Artis monitoring;
            Pickup-loading incl. conveyor.
            Without coolant system, was connected to central supply.
            Machine can be inspected under power.


          Datasheet
          Request / Contact
          used  CNC Lathe TRAUB TNK 36


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17583 · CNC Lathe

          TRAUB - TNK 36 - - 2004 - TX8i

          Technical details
          turning diameter 36 mm︱turning length 100 mm︱control TX8i ︱bar capacity 36 mm︱main spindle speeds: 1 - 6300 ︱power capacity at 60% / 100 % load 10,7 / 6,7 KW︱torque 32 / 21 Nm︱spindle head DIN 55026 - Size 4 ︱Opposed spindle turning speed 1 - 6300 1/min.︱power capacity at 60% / 100 % load 10,7 / 6,7 KW︱torque 32 / 21 Nm︱tool turret with 12 work positions ︱x-axis 50 mm︱z-axis 100 mm︱shaft cross cut 12x12 / 16x16 ︱feed x/z-axis 1 - 15000 mm/min︱Tool drive speed max. 1 - 6000 1/min︱work piece power 2,0 / 5,5 kW︱worktool support Frontapparat ︱no. of working stations 5 Stück︱
          Main and opposed spindle directly driven by spindle motors. Rotating drives in the turret and rear unit. Parts loading / unloading via handling system MHS1500 with pallet assembly X1, Z1: tool turret X3, Z3: front apparatus X4, Y4: rear apparatus Z4: opposed spindle S1: main spindle S4: opposed spindle S5: rotating tools turret S8: rotating tools rear apparatus X2, Z2, Y2, V2: loading portal Machine can be inspected under power.
            turning diameter 36 mm
            turning length 100 mm
            control TX8i
            bar capacity 36 mm
            main spindle speeds: 1 - 6300
            power capacity at 60% / 100 % lo. 10,7 / 6,7 KW
            torque 32 / 21 Nm
            spindle head DIN 55026 - Size 4
            Opposed spindle turning speed 1 - 6300 1/min.
            power capacity at 60% / 100 % lo. 10,7 / 6,7 KW
            torque 32 / 21 Nm
            x-axis 50 mm
            z-axis 100 mm
            shaft cross cut 12x12 / 16x16
            feed x/z-axis 1 - 15000 mm/min
            Tool drive speed max. 1 - 6000 1/min
            work piece power 2,0 / 5,5 kW
            worktool support Frontapparat
            no. of working stations 5 Stück
            Description :
            Main and opposed spindle directly driven by spindle motors.
            Rotating drives in the turret and rear unit.
            Parts loading / unloading via handling system MHS1500 with pallet assembly
            X1, Z1: tool turret
            X3, Z3: front apparatus
            X4, Y4: rear apparatus
            Z4: opposed spindle
            S1: main spindle
            S4: opposed spindle
            S5: rotating tools turret
            S8: rotating tools rear apparatus
            X2, Z2, Y2, V2: loading portal
            Machine can be inspected under power.
          Datasheet
          Request / Contact
          used  CNC Lathe WEISSER Univertor AS 400


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17387 · CNC Lathe

          WEISSER - Univertor AS 400 - - 2002 - Siemens 840 D

          Technical details
          turning diameter 250 mm︱turning length 400 mm︱control Siemens 840 D ︱swing diameter max. 300 mm︱travel -x axis 280 mm︱feed x-axis 0,1 - 30.000 mm/min︱rapid traverse X-axis 30 m/min︱travel -z axis 1.150 mm︱Feed z- axis 0,1 - 60.000 mm / min.︱rapid traverse Z-axis 60 m/min︱spindle bearing diameter 90 mm︱spindle head DIN 55026 - Size A6 ︱turning speeds 1 - 5.000 U/min︱tool turret - number of stations 12 ︱tool taper Capto C4 ︱total power requirement 45 kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 7,0 x 5,0 x 3,2 m︱
          was added to a centerlized cooling unit
            turning diameter 250 mm
            turning length 400 mm
            control Siemens 840 D
            swing diameter max. 300 mm
            travel -x axis 280 mm
            feed x-axis 0,1 - 30.000 mm/min
            rapid traverse X-axis 30 m/min
            travel -z axis 1.150 mm
            Feed z- axis 0,1 - 60.000 mm / min.
            rapid traverse Z-axis 60 m/min
            spindle bearing diameter 90 mm
            spindle head DIN 55026 - Size A6
            turning speeds 1 - 5.000 U/min
            tool turret - number of stations 12
            tool taper Capto C4
            total power requirement 45 kW
            weight of the machine ca. 11 t
            dimensions of the machine ca. 7,0 x 5,0 x 3,2 m
            Description :
            was added to a centerlized cooling unit
          Datasheet
          Request / Contact
          used  CNC Lathe MAZAK SQR200M


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17193 · CNC Lathe

          MAZAK - SQR200M - - 1998 - MAZATROL 640TE

          Technical details
          turning diameter 276 mm︱turning length 610 mm︱control MAZATROL 640TE ︱swing diameter 585 mm︱spindle turning speed - stepless 10 - 5.000 U/min︱spindle drive 22 / 15 kW︱max. torque on the spindle max. 350 Nm︱spindle bore 61 mm︱max. bar diameter 51 mm︱turret 1 (x-stations) 16 ︱x-travel 190 mm︱z-travel 645 mm︱feed X/Z-axis 1 - 30.000 mm/min︱work piece power 3,70 kW︱toolpiece turning speed range 10 - 4.500 U/min︱tool-size (OD turning) 25 mm︱Bit diameter max. 13 mm︱thread boring diameter M8 mm︱end mill cutter Ø16 mm︱turret 2 (x-stations) 12
          CNC Lathe with MAZATROL 640TE control; coolant unit; tail-stock; 2 Turrets - Turret 1 with 16 station and powered tools, Turret 2 with 12 stations.
            turning diameter 276 mm
            turning length 610 mm
            control MAZATROL 640TE
            swing diameter 585 mm
            spindle turning speed - stepless 10 - 5.000 U/min
            spindle drive 22 / 15 kW
            max. torque on the spindle max. 350 Nm
            spindle bore 61 mm
            max. bar diameter 51 mm
            turret 1 (x-stations) 16
            x-travel 190 mm
            z-travel 645 mm
            feed X/Z-axis 1 - 30.000 mm/min
            work piece power 3,70 kW
            toolpiece turning speed range 10 - 4.500 U/min
            tool-size (OD turning) 25 mm
            Bit diameter max. 13 mm
            thread boring diameter M8 mm
            end mill cutter Ø16 mm
            turret 2 (x-stations) 12
            Description :
            CNC Lathe with MAZATROL 640TE control; coolant unit; tail-stock;
            2 Turrets - Turret 1 with 16 station and powered tools,
            Turret 2 with 12 stations.
          Datasheet
          Request / Contact

          CNC Turning- and Milling Center

          used  CNC Turning- and Milling Center GILDEMEISTER GMX 200 linear


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17616 · CNC Turning- and Milling Center

          GILDEMEISTER - GMX 200 linear - - 2005 - SIN 840 D

          Technical details
          turning diameter 560 mm︱turning length 1070 mm︱control SIN 840 D ︱tool taper Capto C6 ︱ tool magacine with 80 Plätzen︱Main spindle ISM90 ︱spindle passage 92 mm︱turning speeds 4.000 U/min︱power capacity at 60% / 100 % load 45 / 36 KW︱torque 600 / 750 Nm︱clamping chuck diameter 200 - 315 mm︱counter-spindle IMS65 ︱spindle passage 65 mm︱turning speeds 5000 U/min︱power capacity at 60% / 100 % load 37 / 25 KW︱torque 270 / 370 Nm︱clamping chuck diameter 200 - 315 mm︱spindle distance 1300 mm︱slide I: -- ︱x-axis 485 mm︱
          Machine with SIEMENS SINUMERIK 840D powerline control, main- and counter-spindle, coolant unit 20 bar 40 l/min, chip conveyor, dust exhauster IFS type IFM. Main-spindle: hollow clamping device Ø92mm, C-axis, 3-jaw hydraulic chuck Ø315mm Counter-spindle: partial hollow clamping device, C-axis, drawtube inside Ø 66mm x 675mm deep, 3-jaw hydraulic chuck Ø250mm, Tailstock function with mechatronic control, contact force max. 8KN can be selected by program Machine can be inspected under power.
            turning diameter 560 mm
            turning length 1070 mm
            control SIN 840 D
            tool taper Capto C6
            tool magacine with 80 Plätzen
            Main spindle ISM90
            spindle passage 92 mm
            turning speeds 4.000 U/min
            power capacity at 60% / 100 % lo. 45 / 36 KW
            torque 600 / 750 Nm
            clamping chuck diameter 200 - 315 mm
            counter-spindle IMS65
            spindle passage 65 mm
            turning speeds 5000 U/min
            power capacity at 60% / 100 % lo. 37 / 25 KW
            torque 270 / 370 Nm
            clamping chuck diameter 200 - 315 mm
            spindle distance 1300 mm
            slide I: --
            x-axis 485 mm
            Description :
            Machine with SIEMENS SINUMERIK 840D powerline control,
            main- and counter-spindle, coolant unit 20 bar 40 l/min,
            chip conveyor, dust exhauster IFS type IFM.
            Main-spindle: hollow clamping device Ø92mm, C-axis,
            3-jaw hydraulic chuck Ø315mm
            Counter-spindle: partial hollow clamping device, C-axis,
            drawtube inside Ø 66mm x 675mm deep,
            3-jaw hydraulic chuck Ø250mm,
            Tailstock function with mechatronic control,
            contact force max. 8KN can be selected by program
            Machine can be inspected under power.
          Datasheet
          Request / Contact
          used  CNC Turning- and Milling Center WFL-MILLTURN M60x2000


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17662 · CNC Turning- and Milling Center

          WFL-MILLTURN - M60x2000 - - 2000 - SIN 840 D

          Technical details
          turning diameter 670 mm︱turning length 2000 mm︱control SIN 840 D ︱z-axis 2150 mm︱Feed z- axis 1 - 20.000 mm / min︱rapid traverse Z-axis 20,00 m/min︱x-axis 700 mm︱feed x-axis 1 - 15.000 mm/min︱rapid traverse X-axis 15,00 m/min︱Main spindle S1 ︱Turning Speed - Range 1 8 - 825 U/min.︱Turning Speed - Range 2 33 - 3300 U/min.︱power capacity at 100 % load 40,00 kW︱spindle head DIN 55026 - Size A11 ︱spindle diameter in front bearing 160 mm︱spindle bore 115 mm︱C-axis 360 x 0,001 °︱milling spindle S2 ︱tool taper HSK A100 ︱turning speed range - stepless 10 - 4000 U/min︱
          With control SIEMENS SIN840D, 3-jaw hydraulic chuck SMW (Ø260mm), chip conveyor, coolant unit, steady SMW SLU-4. Tool measurement with Renishaw LP2H Workpiece measurement with Marposs E86 Various Tool Holders
            turning diameter 670 mm
            turning length 2000 mm
            control SIN 840 D
            z-axis 2150 mm
            Feed z- axis 1 - 20.000 mm / min
            rapid traverse Z-axis 20,00 m/min
            x-axis 700 mm
            feed x-axis 1 - 15.000 mm/min
            rapid traverse X-axis 15,00 m/min
            Main spindle S1
            Turning Speed - Range 1 8 - 825 U/min.
            Turning Speed - Range 2 33 - 3300 U/min.
            power capacity at 100 % load 40,00 kW
            spindle head DIN 55026 - Size A11
            spindle diameter in front bearin. 160 mm
            spindle bore 115 mm
            C-axis 360 x 0,001 °
            milling spindle S2
            tool taper HSK A100
            turning speed range - stepless 10 - 4000 U/min
            Description :
            With control SIEMENS SIN840D, 3-jaw hydraulic chuck SMW (Ø260mm),
            chip conveyor, coolant unit, steady SMW SLU-4.
            Tool measurement with Renishaw LP2H
            Workpiece measurement with Marposs E86
            Various Tool Holders
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled BOEHRINGER DNA 820/2


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17592 · Lathe - cycle-controlled

          BOEHRINGER - DNA 820/2 - - 1980 - SIN 840 D

          Technical details
          turning diameter 1000 mm︱turning length 800 mm︱control SIN 840 D ︱turning diameter over slide rest 760 mm︱transmission ratio 4 ︱speeds 4 - 800 U/min︱spindle head DIN 55027 - Size 15 ︱total power requirement 37 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,0 x 3,0 x 2,65 m︱
          Clamping disc Ø 800 mm Electric Sauter 4-fold revolver 4 steel holders Chip conveyor Oil skimmer Coolant pump Fixators
            turning diameter 1000 mm
            turning length 800 mm
            control SIN 840 D
            turning diameter over slide rest 760 mm
            transmission ratio 4
            speeds 4 - 800 U/min
            spindle head DIN 55027 - Size 15
            total power requirement 37 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,0 x 3,0 x 2,65 m
            Description :
            Clamping disc Ø 800 mm
            Electric Sauter 4-fold revolver
            4 steel holders
            Chip conveyor
            Oil skimmer
            Coolant pump
            Fixators
          Datasheet
          Request / Contact

          Vertical Turning Machine

          used  Vertical Turning Machine WEISSER Univertor A-90L


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-16745 · Vertical Turning Machine

          WEISSER - Univertor A-90L - - 2001 - SINUMERIK 840D

          Technical details
          turning diameter 200 mm︱turning length 120 mm︱turning height 120 mm︱control SINUMERIK 840D ︱x-axis 400 mm︱z-axis 280 mm︱rapid power traverse in X-and Z direction 60 / 30 m/min︱feeding force 10 / 8 kN︱turning speeds 3000 U/min︱front bearing 90 mm︱total power requirement kW︱weight of the machine ca. 11 t︱dimensions of the machine ca. 4,1 x 2,2 x 2,5 m︱
          SMW AUTOBLOC 3 chaw cuck Ø 210 mm
            turning diameter 200 mm
            turning length 120 mm
            turning height 120 mm
            control SINUMERIK 840D
            x-axis 400 mm
            z-axis 280 mm
            rapid power traverse in X-and Z . 60 / 30 m/min
            feeding force 10 / 8 kN
            turning speeds 3000 U/min
            front bearing 90 mm
            weight of the machine ca. 11 t
            dimensions of the machine ca. 4,1 x 2,2 x 2,5 m
            Description :
            SMW AUTOBLOC 3 chaw cuck Ø 210 mm
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used  Vertical Turret Lathe - Single Column DÖRRIES VCE1600


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17630 · Vertical Turret Lathe - Single Column

          DÖRRIES - VCE1600 - - 2000 - SIN840D

          Technical details
          faceplate diameter 1400 mm︱swing diameter 1600 mm︱turning height 1500 mm︱Control SIN840D ︱workpiece weight 8000 kg︱ram stroke 1100 mm︱ram head dimension 250 x 250 mm︱cross rail adjustment 700 mm︱z-axis 1000 mm︱x-axis +/- 950 mm︱faceplate turning speed range -stepless- 1 - 400 U/min︱toolpiece turning speed range 1 - 3000 U/min︱tool taper ISO50 / Capto C6 ︱total power requirement 100,00 kW︱weight of the machine ca. 50,00 t︱dimensions of the machine ca. 6,40 x 4,90 x H5,00 m︱
          Machine with CNC SIEMENS 840 D - hydrostatic in X and Z-axes - autom. toolchanger for 40 tools - autom. head changer - angular milling head, grinding spindle, boring bar adpater and base holder for turning tools (Capto) - C-axis driven tools 1-3000 rpm 30 kW - adjustable crossrail positioning - coolant attachment with through spindle coolant - dust exhauster, chip conveyor and complete machine splash housing with outom. door and walkable working area - several toolholders system Capto
            faceplate diameter 1400 mm
            swing diameter 1600 mm
            turning height 1500 mm
            Control SIN840D
            workpiece weight 8000 kg
            ram stroke 1100 mm
            ram head dimension 250 x 250 mm
            cross rail adjustment 700 mm
            z-axis 1000 mm
            x-axis +/- 950 mm
            faceplate turning speed range -s. 1 - 400 U/min
            toolpiece turning speed range 1 - 3000 U/min
            tool taper ISO50 / Capto C6
            total power requirement 100,00 kW
            weight of the machine ca. 50,00 t
            dimensions of the machine ca. 6,40 x 4,90 x H5,00 m
            Description :
            Machine with CNC SIEMENS 840 D
            - hydrostatic in X and Z-axes
            - autom. toolchanger for 40 tools
            - autom. head changer
            - angular milling head, grinding spindle,
            boring bar adpater and base holder for turning tools (Capto)
            - C-axis driven tools 1-3000 rpm 30 kW
            - adjustable crossrail positioning
            - coolant attachment with through spindle coolant
            - dust exhauster, chip conveyor and complete machine splash housing
            with outom. door and walkable working area
            - several toolholders system Capto
          Datasheet
          Request / Contact

          Machining Center - Horizontal

          used  Machining Center - Horizontal DECKEL-MAHO DMC 80H linear


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17659 · Machining Center - Horizontal

          DECKEL-MAHO - DMC 80H linear - - 2005 - SIN840D

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 1050 mm︱Control SIN840D ︱spindle turning speed - stepless 1 - 18.000 U/min︱feeding force at 40 % ED 35,00 KW︱power capacity at 100 % load 25,00 kW︱tool taper HSK-A63 ︱spindle diameter in front bearing 80 mm︱feed X/Y/Z/-axis 1 - 100.000 mm/min︱rapid traverse X/Y/Z 100 m/min︱B - axis 360 x 0,001 °︱Table speed max. 90 U/min︱size of pallet 630 x 630 mm︱numbers of pallets 2 ︱workpiece weight 800 kg︱dimension of workpiece Ø900 x H1.000 mm︱tool magazin: 180 ︱tool diameter 80 mm︱wotkpiece diameter with 2 vacant positions 160 mm︱
          With control SIEMENS SINUMERIK 840D-powerline, motor spindle 18,000 rpm, NC rotary table with DirectDrive technology incl. hydr. clamping, chip conveyor, BALLUFF tool identification, oil and emulsion dust exhauster, coolant unit with coolant-through-ssindle (80 bar // 19 l / min), electron. handwheel, torque support, set-up station can be rotated automatically 4x90 ° - 2-hand operation, hydraulic clamping for workpiece on machining-table and set-up station.
            x-travel 800 mm
            y-travel 800 mm
            z-travel 1050 mm
            Control SIN840D
            spindle turning speed - stepless 1 - 18.000 U/min
            feeding force at 40 % ED 35,00 KW
            power capacity at 100 % load 25,00 kW
            tool taper HSK-A63
            spindle diameter in front bearin. 80 mm
            feed X/Y/Z/-axis 1 - 100.000 mm/min
            rapid traverse X/Y/Z 100 m/min
            B - axis 360 x 0,001 °
            Table speed max. 90 U/min
            size of pallet 630 x 630 mm
            numbers of pallets 2
            workpiece weight 800 kg
            dimension of workpiece Ø900 x H1.000 mm
            tool magazin: 180
            tool diameter 80 mm
            wotkpiece diameter with 2 vacant. 160 mm
            Description :
            With control SIEMENS SINUMERIK 840D-powerline, motor spindle 18,000 rpm,
            NC rotary table with DirectDrive technology incl. hydr. clamping, chip conveyor,
            BALLUFF tool identification, oil and emulsion dust exhauster,
            coolant unit with coolant-through-ssindle (80 bar // 19 l / min),
            electron. handwheel, torque support,
            set-up station can be rotated automatically 4x90 ° - 2-hand operation,
            hydraulic clamping for workpiece on machining-table and set-up station.
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HELLER MCH-280


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17685 · Machining Center - Horizontal

          HELLER - MCH-280 - - 2003 - SIN840D

          Technical details
          x-travel 1000 mm︱y-travel 800 mm︱z-travel 800 mm︱Control SIN840D ︱spindle turning speed - gearbox stage 1 45 - 1.700 1/min.︱spindle turning speed - gearbox stage 2 1.701 - 6.000 1/min.︱power capacity at 40 % load 43,00 KW︱feed X/Y/Z/-axis 1 - 50.000 mm/min︱rapid traverse X/Y/Z 50,00 m/min︱feed capacity X / Y - axes 15.000 N︱feed capacity Z - axes 17.500 N︱B - axis 360 x 1 °︱size of pallet 2x 630 x 630 mm︱workpiece weight 800 kg︱toolpiece magazine: chain magazine 50 Stück︱tool taper HSK 100 ︱tool diameter 112 mm︱wotkpiece diameter with 2 vacant positions 228 mm︱tool length - max. 450 mm︱total power requirement 62,00 kW︱
          Horizontal machining center with control SIEMENS SINUMERIK 840D, set-up station man. rotatable, hydr. workpiece clamping, broken tool control, The machine was connected to the central coolant supply, but is equipped with a high pressure pump (50 bar), coolant through the spindle, chip conveyor.
            x-travel 1000 mm
            y-travel 800 mm
            z-travel 800 mm
            Control SIN840D
            spindle turning speed - gearbox . 45 - 1.700 1/min.
            spindle turning speed - gearbox . 1.701 - 6.000 1/min.
            power capacity at 40 % load 43,00 KW
            feed X/Y/Z/-axis 1 - 50.000 mm/min
            rapid traverse X/Y/Z 50,00 m/min
            feed capacity X / Y - axes 15.000 N
            feed capacity Z - axes 17.500 N
            B - axis 360 x 1 °
            size of pallet 2x 630 x 630 mm
            workpiece weight 800 kg
            toolpiece magazine: chain magazi. 50 Stück
            tool taper HSK 100
            tool diameter 112 mm
            wotkpiece diameter with 2 vacant. 228 mm
            tool length - max. 450 mm
            total power requirement 62,00 kW
            Description :
            Horizontal machining center with control SIEMENS SINUMERIK 840D,
            set-up station man. rotatable, hydr. workpiece clamping, broken tool control,
            The machine was connected to the central coolant supply, but is equipped
            with a high pressure pump (50 bar), coolant through the spindle,
            chip conveyor.
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal STARRAG HECKERT CWK 400 Dynamic


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17636 · Machining Center - Horizontal

          STARRAG HECKERT - CWK 400 Dynamic - - 2001 - SIN840D

          Technical details
          x-travel 650 mm︱y-travel 650 mm︱z-travel 650 mm︱Control SIN840D ︱size of pallet 500 x 400 mm︱table load capacity 500 kg︱B - axis 360 x 0,001 °︱spindle turning speed range 50 - 10.000 U/min︱power capacity at 100 % load 37,00 kW︱feeding force at 40 % ED 24,00 KW︱feeds x/y/z 1 - 40.000 mm/min︱rapid traverse X/Y/Z 40,00 m/min︱spindle diameter in front bearing mm︱tool taper DIN 69893 SK40 ︱ tool magacine with 240 Plätzen︱tool diameter 80 mm︱workpiece diameter at two free places aside 160 mm︱tool length - max. 350 mm︱weight of tools max. 10,00 kg︱total power requirement 60 kW︱
          Horizontal 4-axis machining center with control SIEMENS SIN840 D, tower magazine with 240 places (4 towers), 6-fold pallet changer, coolant through the spindle, coolant filter, chip conveyor.
            x-travel 650 mm
            y-travel 650 mm
            z-travel 650 mm
            Control SIN840D
            size of pallet 500 x 400 mm
            table load capacity 500 kg
            B - axis 360 x 0,001 °
            spindle turning speed range 50 - 10.000 U/min
            power capacity at 100 % load 37,00 kW
            feeding force at 40 % ED 24,00 KW
            feeds x/y/z 1 - 40.000 mm/min
            rapid traverse X/Y/Z 40,00 m/min
            tool taper DIN 69893 SK40
            tool magacine with 240 Plätzen
            tool diameter 80 mm
            workpiece diameter at two free p. 160 mm
            tool length - max. 350 mm
            weight of tools max. 10,00 kg
            total power requirement 60 kW
            Description :
            Horizontal 4-axis machining center with control SIEMENS SIN840 D,
            tower magazine with 240 places (4 towers), 6-fold pallet changer,
            coolant through the spindle, coolant filter, chip conveyor.
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal STAMA MC536TWIN


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17686 · Machining Center - Horizontal

          STAMA - MC536TWIN - - 2001 - SIN840D

          Technical details
          x-travel 2.200 mm︱y-travel 530 mm︱z-travel 510 mm︱Control SIN840D ︱spindle distance 400 mm︱spindle turning speed range 36 - 3.800 U/min︱power capacity 22,00 kW︱tool taper HSK 100 ︱feed X/Y/Z/-axis 1 - 10.000 mm/min︱rapid traverse X/Y/Z 40,00 m/min︱feed capacity X / Y - axes 10.000 N︱feed capacity Z - axes 15.000 N︱Milling power 400 ccm︱Boring power 50 mm︱thread capacity M30 ︱toolpiece magazine: chain magazine 2x 21 Stück︱tool diameter 220 mm︱tool length - max. 320 mm︱table surface area 3.100 x 580 mm︱number of T-slots 2x2
            x-travel 2.200 mm
            y-travel 530 mm
            z-travel 510 mm
            Control SIN840D
            spindle distance 400 mm
            spindle turning speed range 36 - 3.800 U/min
            power capacity 22,00 kW
            tool taper HSK 100
            feed X/Y/Z/-axis 1 - 10.000 mm/min
            rapid traverse X/Y/Z 40,00 m/min
            feed capacity X / Y - axes 10.000 N
            feed capacity Z - axes 15.000 N
            Milling power 400 ccm
            Boring power 50 mm
            thread capacity M30
            toolpiece magazine: chain magazi. 2x 21 Stück
            tool diameter 220 mm
            tool length - max. 320 mm
            table surface area 3.100 x 580 mm
            number of T-slots 2x2
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HELLER MC26


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17586 · Machining Center - Horizontal

          HELLER - MC26 - - 2000 - SIN 840D

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 800 mm︱control SIN 840D ︱round table 360,000 x 0,001 °︱size of pallet 500 x 630 mm︱workpiece weight 800 kg︱spindle turning speed - stepless 45 - 12500 U/min︱spindle drive 52 kW︱tool taper HSK 80 ︱feed X/Y/Z-axis 1 - 60000 mm/min︱rapid traverse X/Y/Z 60 m/min︱rapid traverse rotary table 20 U/min︱toolpiece magazine: chain magazine 120 Stück︱tool diameter 95 mm︱tool diameter with 2 vacant positions 228 mm︱tool length - max. 450 mm︱total power requirement 56,00 kW︱weight of the machine ca. 12,00 t︱dimensions of the machine ca. 8.00 x 4.90 x 3,80 m︱
          Horizontal machining center with SIEMENS SIN840D control; Coolant unit KNOLL; chip conveyor, coolant through the spindle 50bar;
            x-travel 800 mm
            y-travel 800 mm
            z-travel 800 mm
            control SIN 840D
            round table 360,000 x 0,001 °
            size of pallet 500 x 630 mm
            workpiece weight 800 kg
            spindle turning speed - stepless 45 - 12500 U/min
            spindle drive 52 kW
            tool taper HSK 80
            feed X/Y/Z-axis 1 - 60000 mm/min
            rapid traverse X/Y/Z 60 m/min
            rapid traverse rotary table 20 U/min
            toolpiece magazine: chain magazi. 120 Stück
            tool diameter 95 mm
            tool diameter with 2 vacant posi. 228 mm
            tool length - max. 450 mm
            total power requirement 56,00 kW
            weight of the machine ca. 12,00 t
            dimensions of the machine ca. 8.00 x 4.90 x 3,80 m
            Description :
            Horizontal machining center with SIEMENS SIN840D control;
            Coolant unit KNOLL; chip conveyor, coolant through the spindle 50bar;
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HECKERT CWK 630


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17673 · Machining Center - Horizontal

          HECKERT - CWK 630 - - 2000 -

          Technical details
          x-travel 1050 mm︱y-travel 1000 mm︱z-travel 1160 mm︱Control SIN 840D ︱spindle turning speed - stepless 1 - 15.000 U/min︱power capacity at 40 % load 31,00 KW︱power capacity at 100 % load 19,00 kW︱tool taper HSK-A100 ︱spindle diameter in front bearing 100 mm︱feed X/Y/Z/-axis 0 - 100.000 mm/min︱rapid traverse X/Y/Z 100 m/min︱B - axis 360 x 0,001 °︱Table speed max. 40 1/min︱size of pallet 630 x 800 mm︱numbers of pallets 2 ︱workpiece weight 300 / 1000 kg︱dimension of workpiece Ø1100 x H1200 mm︱tool magazin: 180 ︱tool diameter 110 mm︱wotkpiece diameter with 2 vacant positions 250 mm︱
          Machine in high-precision execution, control Siemens 840D, NC rotary table, tool-tower magazine with 180 pockets, coolant unit with coolant through the spindle (30,40,50 bar via M-commands), flushing gun, chip conveyor, electron. handwheel, hydraulic clamping unit for workpieces,
            x-travel 1050 mm
            y-travel 1000 mm
            z-travel 1160 mm
            Control SIN 840D
            spindle turning speed - stepless 1 - 15.000 U/min
            power capacity at 40 % load 31,00 KW
            power capacity at 100 % load 19,00 kW
            tool taper HSK-A100
            spindle diameter in front bearin. 100 mm
            feed X/Y/Z/-axis 0 - 100.000 mm/min
            rapid traverse X/Y/Z 100 m/min
            B - axis 360 x 0,001 °
            Table speed max. 40 1/min
            size of pallet 630 x 800 mm
            numbers of pallets 2
            workpiece weight 300 / 1000 kg
            dimension of workpiece Ø1100 x H1200 mm
            tool magazin: 180
            tool diameter 110 mm
            wotkpiece diameter with 2 vacant. 250 mm
            Description :
            Machine in high-precision execution, control Siemens 840D, NC rotary table,
            tool-tower magazine with 180 pockets, coolant unit with
            coolant through the spindle (30,40,50 bar via M-commands), flushing gun,
            chip conveyor, electron. handwheel, hydraulic clamping unit for workpieces,
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HECKERT CWK 630


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17682 · Machining Center - Horizontal

          HECKERT - CWK 630 - - 2000 -

          Technical details
          x-travel 1050 mm︱y-travel 1000 mm︱z-travel 1160 mm︱Control SIN 840D ︱spindle turning speed - stepless 1 - 15.000 U/min︱power capacity at 40 % load 31,00 KW︱power capacity at 100 % load 19,00 kW︱tool taper HSK-A100 ︱spindle diameter in front bearing 100 mm︱feed X/Y/Z/-axis 0 - 100.000 mm/min︱rapid traverse X/Y/Z 100 m/min︱B - axis 360 x 0,001 °︱Table speed max. 40 1/min︱size of pallet 630 x 800 mm︱numbers of pallets 2 ︱workpiece weight 300 / 1000 kg︱dimension of workpiece Ø1.100 x H1.200 mm︱tool magazin: 240 ︱tool diameter 110 mm︱wotkpiece diameter with 2 vacant positions 250 mm︱
          Machine in high-precision execution, control Siemens 840D, NC rotary table, tool-tower magazine with 240 pockets, coolant unit with coolant through the spindle (30,40,50 bar via M-commands), flushing gun, chip conveyor, electron. handwheel, hydraulic clamping unit for workpieces,
            x-travel 1050 mm
            y-travel 1000 mm
            z-travel 1160 mm
            Control SIN 840D
            spindle turning speed - stepless 1 - 15.000 U/min
            power capacity at 40 % load 31,00 KW
            power capacity at 100 % load 19,00 kW
            tool taper HSK-A100
            spindle diameter in front bearin. 100 mm
            feed X/Y/Z/-axis 0 - 100.000 mm/min
            rapid traverse X/Y/Z 100 m/min
            B - axis 360 x 0,001 °
            Table speed max. 40 1/min
            size of pallet 630 x 800 mm
            numbers of pallets 2
            workpiece weight 300 / 1000 kg
            dimension of workpiece Ø1.100 x H1.200 mm
            tool magazin: 240
            tool diameter 110 mm
            wotkpiece diameter with 2 vacant. 250 mm
            Description :
            Machine in high-precision execution, control Siemens 840D, NC rotary table,
            tool-tower magazine with 240 pockets, coolant unit with
            coolant through the spindle (30,40,50 bar via M-commands), flushing gun,
            chip conveyor, electron. handwheel, hydraulic clamping unit for workpieces,
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HELLER MC25


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17587 · Machining Center - Horizontal

          HELLER - MC25 - - 1999 - Uni-Pro CNC90

          Technical details
          x-travel 800 mm︱y-travel 800 mm︱z-travel 800 mm︱control Uni-Pro CNC90 ︱round table 360,000 x 0,001 °︱size of pallet 2x 500 x 630 mm︱workpiece weight 800 kg︱max. workpiece diameter 900 mm︱workpiece height max. 1000 mm︱spindle turning speed - stepless 45 - 8000 U/min︱power capacity at 100 % load 20,00 kW︱feeding force at 40 % ED 30,00 KW︱max. torque at 40% / 100% load 143 / 95 Nm︱tool taper SK40 ︱feed X/Y/Z-axis 1 - 60.000 mm/min︱rapid traverse X/Y/Z 60 m/min︱feed capacity X/Y/Z 10,00 kN︱rapid traverse rotary table 20 U/min︱toolpiece magazine: chain magazine 40 Stück︱tool diameter 72 mm︱
          Horizontal machining center with HELLER Uni-Pro CNC90 control; Coolant unit KNOLL; chip conveyor, coolant through the spindle 70bar; BLUM probe; electron. Handwheel
            x-travel 800 mm
            y-travel 800 mm
            z-travel 800 mm
            control Uni-Pro CNC90
            round table 360,000 x 0,001 °
            size of pallet 2x 500 x 630 mm
            workpiece weight 800 kg
            max. workpiece diameter 900 mm
            workpiece height max. 1000 mm
            spindle turning speed - stepless 45 - 8000 U/min
            power capacity at 100 % load 20,00 kW
            feeding force at 40 % ED 30,00 KW
            max. torque at 40% / 100% load 143 / 95 Nm
            tool taper SK40
            feed X/Y/Z-axis 1 - 60.000 mm/min
            rapid traverse X/Y/Z 60 m/min
            feed capacity X/Y/Z 10,00 kN
            rapid traverse rotary table 20 U/min
            toolpiece magazine: chain magazi. 40 Stück
            tool diameter 72 mm
            Description :
            Horizontal machining center with HELLER Uni-Pro CNC90 control;
            Coolant unit KNOLL; chip conveyor, coolant through the spindle 70bar;
            BLUM probe; electron. Handwheel
          Datasheet
          Request / Contact
          used  Machining Center - Horizontal HECKERT CWK 1000 H/V


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17382 · Machining Center - Horizontal

          HECKERT - CWK 1000 H/V - - 1997 - SINUMERIK 840 C

          Technical details
          x-travel 1700 mm︱y-travel 1100 mm︱z-travel 1450 mm︱Control SINUMERIK 840 C ︱feed X/Y/Z/-axis 1 - 24000 mm/min︱rapid traverse X/Y/Z 24,00 m/min︱feed capacity X/Y/Z 20,00 kN︱B - axis 360 x 0,001 °︱feed B-axis 9,90 U / min︱size of pallet 2x 1000 x 800 mm︱workpiece weight 2500 kg︱max. workpiece diameter 1650 mm︱workpiece height max. 1400 mm︱distance spindle center to table 50 - 1150 mm︱spindle turning speed range 10 - 4200 U/min︱power capacity at 60% / 100 % load 27,50 / 22,00 KW︱tool taper SK50 ︱spindle diameter in front bearing 100 mm︱max. torque on the spindle 800 / 1000 ︱tool magazin: 130
          Machining center with horizontal / vertical milling head, control SIEMENS SINUMERIK 840C, coolant unit, chip conveyor, tool life monitoring, laser tool breakage control external coolant-supply with nozzles around the spindle, Internal coolant-supply through the spindle with 30/40/50 bar. Machine can be inspected under power.
            x-travel 1700 mm
            y-travel 1100 mm
            z-travel 1450 mm
            Control SINUMERIK 840 C
            feed X/Y/Z/-axis 1 - 24000 mm/min
            rapid traverse X/Y/Z 24,00 m/min
            feed capacity X/Y/Z 20,00 kN
            B - axis 360 x 0,001 °
            feed B-axis 9,90 U / min
            size of pallet 2x 1000 x 800 mm
            workpiece weight 2500 kg
            max. workpiece diameter 1650 mm
            workpiece height max. 1400 mm
            distance spindle center to table 50 - 1150 mm
            spindle turning speed range 10 - 4200 U/min
            power capacity at 60% / 100 % lo. 27,50 / 22,00 KW
            tool taper SK50
            spindle diameter in front bearin. 100 mm
            max. torque on the spindle 800 / 1000
            tool magazin: 130
            Description :
            Machining center with horizontal / vertical milling head,
            control SIEMENS SINUMERIK 840C, coolant unit, chip conveyor,
            tool life monitoring, laser tool breakage control
            external coolant-supply with nozzles around the spindle,
            Internal coolant-supply through the spindle with 30/40/50 bar.
            Machine can be inspected under power.
          Datasheet
          Request / Contact

          Machining Center - Universal

          used  Machining Center - Universal MIKRON-AGIE CHARMILLES XSM 600 U-LP


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17550 · Machining Center - Universal

          MIKRON-AGIE CHARMILLES - XSM 600 U-LP - - 2013 - iTNC 530

          Technical details
          x-travel 800 mm︱y-travel 600 mm︱z-travel 500 mm︱Control iTNC 530 ︱swival range +/- + 30 / - 110 °︱speed spindle max. 36.000 U/min.︱tool taper HSK-E50 ︱rapid traverse X/Y/Z 100 m/min︱table load capacity 120 KG︱tool magacine with 60 Pockets︱tool diameter 65 mm︱tool length - max. 210 mm︱weight of tools max. 2,5 kg︱Chip to chip time 6 sec.︱feed X/Y/Z/-axis 100.000 mm/min︱feed capacity X/Y/Z 5,5 / 3,4 / 3,6 kN︱rapid traverse 100 m/min︱type of pallet-magazin: round 21 ︱total power requirement 40 kW︱weight of the machine ca. 12,5 t︱
          Workpiece changer WPC III with 21 places; Pallets not included Pallet system 3R (SP-22201)for MACRO MAGNUM PALLETS Ø 160 mm Laser tool measuring electronic handwheel M&H probe KinematikOpt chip conveyor Coolant system + belt filter
            x-travel 800 mm
            y-travel 600 mm
            z-travel 500 mm
            Control iTNC 530
            swival range +/- + 30 / - 110 °
            speed spindle max. 36.000 U/min.
            tool taper HSK-E50
            rapid traverse X/Y/Z 100 m/min
            table load capacity 120 KG
            tool magacine with 60 Pockets
            tool diameter 65 mm
            tool length - max. 210 mm
            weight of tools max. 2,5 kg
            Chip to chip time 6 sec.
            feed X/Y/Z/-axis 100.000 mm/min
            feed capacity X/Y/Z 5,5 / 3,4 / 3,6 kN
            rapid traverse 100 m/min
            type of pallet-magazin: round 21
            total power requirement 40 kW
            weight of the machine ca. 12,5 t
            Description :
            Workpiece changer WPC III with 21 places; Pallets not included
            Pallet system 3R (SP-22201)for MACRO MAGNUM PALLETS Ø 160 mm
            Laser tool measuring
            electronic handwheel
            M&H probe
            KinematikOpt
            chip conveyor
            Coolant system + belt filter
          Datasheet
          Request / Contact
          used  Machining Center - Universal DECKEL-MAHO DMC 105V linear


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17677 · Machining Center - Universal

          DECKEL-MAHO - DMC 105V linear - - 2005 - SIN 840 D

          Technical details
          x-travel 1050 mm︱y-travel 800 mm︱z-travel 560 mm︱Control SIN 840 D ︱table surface area Ø950 mm︱table load capacity 600 kg︱tool magacine with 120 Plätzen︱tool diameter 80 mm︱wotkpiece diameter with 2 vacant positions 140 mm︱tool length - max. 300 mm︱feed X/Y/Z/-axis 90 m/min︱rapid traverse X/Y/Z 90 m/min︱B - axis 360 x 0,001 °︱C-axis +110 / -10 °︱spindle turning speed - stepless 1 - 18.000 U/min︱power capacity at 40 % load 35,00 KW︱power capacity at 100 % load 25,00 kW︱tool taper HSK-A63 ︱spindle diameter in front bearing 80 mm︱total power requirement 65,00 kW︱
          5-axis machining center with SIEMENS SINUMERIK 840D powerline control, tool-brekage-control, coolant unit, NC-rotary table, slewing spindle, exhauster, coolant through the spindle
            x-travel 1050 mm
            y-travel 800 mm
            z-travel 560 mm
            Control SIN 840 D
            table surface area Ø950 mm
            table load capacity 600 kg
            tool magacine with 120 Plätzen
            tool diameter 80 mm
            wotkpiece diameter with 2 vacant. 140 mm
            tool length - max. 300 mm
            feed X/Y/Z/-axis 90 m/min
            rapid traverse X/Y/Z 90 m/min
            B - axis 360 x 0,001 °
            C-axis +110 / -10 °
            spindle turning speed - stepless 1 - 18.000 U/min
            power capacity at 40 % load 35,00 KW
            power capacity at 100 % load 25,00 kW
            tool taper HSK-A63
            spindle diameter in front bearin. 80 mm
            total power requirement 65,00 kW
            Description :
            5-axis machining center with SIEMENS SINUMERIK 840D powerline control,
            tool-brekage-control, coolant unit, NC-rotary table, slewing spindle,
            exhauster, coolant through the spindle
          Datasheet
          Request / Contact
          used  Machining Center - Universal DECKEL-MAHO DMU70eVolution


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-17703 · Machining Center - Universal

          DECKEL-MAHO - DMU70eVolution - - 2004 - iTNC530

          Technical details
          x-travel 700 mm︱y-travel 600 mm︱z-travel 520 mm︱Control iTNC530 ︱B - axis 0 - 180 x 0,001 °︱C-axis 360 x 0,001 °︱table surface area 700 x 500 mm︱table load 0,35 t︱spindle turning speed - stepless 1 - 18.000 U/min︱tool taper SK40 ︱tool magazin: 92 ︱tool diameter mm︱tool length - max. 315 mm︱weight of tools max. 6,00 kg︱total power requirement 50,00 kW︱weight of the machine ca. 12,00 t︱dimensions of the machine ca. 6,50 x 4,00 x H3,20 m︱
            x-travel 700 mm
            y-travel 600 mm
            z-travel 520 mm
            Control iTNC530
            B - axis 0 - 180 x 0,001 °
            C-axis 360 x 0,001 °
            table surface area 700 x 500 mm
            table load 0,35 t
            spindle turning speed - stepless 1 - 18.000 U/min
            tool taper SK40
            tool magazin: 92
            tool length - max. 315 mm
            weight of tools max. 6,00 kg
            total power requirement 50,00 kW
            weight of the machine ca. 12,00 t
            dimensions of the machine ca. 6,50 x 4,00 x H3,20 m
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   

            Trader Profile:   Amann Werkzeugmaschinen GmbH

          Contact Trader



            Amann Werkzeugmaschinen GmbH
           Landshuter Straße 1
            85716 Unterschleißheim
            Deutschland
            (0049) 89 317754 0">(0049) 89 317754 0
            (0049) 89 3174262
            info@amann-wzm.de
            www.amann-wzm.de

          Profile of Trader

          Amann was founded in 1969 and - in the course of the years -has developed from a small-sized enterprise into one of the best-known and trusted machine tool-dealers in Germany.

          In 1988, we built our present-day production halls and offices in the north of Munich. Today, on an exhibition area of more than 5,000 m2, more than 500 premium second-hand and new machinetools are available for our valued customers at all times. An expansion in size and range that has made it possible for us to not just serve the traditional European field, but also the ambitious and still upcoming Asian market. Our maxims of high quality standards, German reliability, topquality services and fair prices are highly valued by our local, regional and international customers for more than 40 years now.

          Extensive contacts to the large-scale industry enable us to find almost any machine tool for you. Our special service: The Amann Search Service - with it, even highly specialized search inquiries are in good hands with us. All of this makes us an efficient partner, operating on an internationalclevel and catering to all your needs and wishes in metal working.

          Discover the advantages of working with Amann!

          Especially for the automotive industry (OEM and suppliers), aerospace, medical technology, transmission manufacturing, ball/rolling bearing production, mechanical engineering and measurement/control technology, Amann is one of the prime addresses for highest economic efficiency. Our comprehensive line of products ranges from conventional to CNC-controlled machine tools. We have in stock every machine (used and new) essential to your production - from lathes, milling machines, grinding machines, gear cutting machines, presses, machining centres, drilling machines and complete crankshaft production lines to sheet metal processing machines like plate shears, press brakes, roll bending machines,laser machines, punch presses, polishing machines - and many more.

          In addition we are experts in distributing complex manufacturing lines and entire operational facilities. Our second-hand machine tools bear the names of renowned manufacturers like: Aba, Amada, Boeringer, DMG, Doerries, Durma, EHT, Elb, Gleason, Hurth, Ingersoll, Jung, Klingenberg, Liebherr, Lorenz, LVD, Matec, Mazak, Mori Seiki, Müller-Weingarten, Nosstek, Oerlikon, Pfauter, Reisshauer, Schaudt, Schiess, Schuler, Studer, Soraluce, Timesaver, TOS, Trumpf, Schuler, Union, Weiler, Weinbrenner, WFL and Wotan..

          Office & warehouse 
          Landshuter Str. 1 - 85716 Unterschleissheim/Muenchen 
          Germany
          Phone
          +49 89 317754-0
          Fax 
          +49 89 317754-99
          Email 
          All inquiries and offers to : info@amann-wzm.de
          Mr. Bobe
          General Manager 
          Mrs. Amann
          Authorized signatory
          Mr. Haertl
          Sales Manager Europe / Africa 
          Mr. Berchner
          Sales Manager Middle East / Asia 
          Mr. Nagel
          Sales Manager Middle East / Asia 
          Mrs. Krappel
          Sales Assistent 
          Mrs. Juelicher
          Sales Assistent 




          Amann Werkzeugmaschinen GmbH   85716 Unterschleißheim Landshuter Straße 1 Deutschland
          Amann Werkzeugmaschinen GmbH

          Landshuter Straße 1



          Contact Trader


            Amann Werkzeugmaschinen GmbH
           Landshuter Straße 1
            85716 Unterschleißheim
            Deutschland
            (0049) 89 317754 0
            (0049) 89 3174262
            info@amann-wzm.de
            www.amann-wzm.de
            Contact person:
          Herrn Alois Kindermann 08931775420

            Auf 5000 m² Ausstellungsfläche stehen ständig mehr als 500 moderne gebrauchte Werkzeugmaschinen für unsere Kunden zu Verfügung.




          Machine category


          1-Ständer - Ziehpresse - Hydraulisch · Abgratpresse · Abrichtgerät · Absaugung · Anreißplatte · Aufspannplatte · Auswuchtmaschine · Bandsäge - Automatisch · Bandsägeautomat - Horizontal · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Biegemaschine horizontal · Bürstenentgrater · CNC Dreh- und Fräszentrum · CNC Drehmaschine · CNC Drehmaschine - Schrägbettmaschine · Doppelständer - Kurbelpresse · Doppelständerpresse - Hydraulisch · Doppelständerziehpresse - Hydr.-Dualform · Doppelständerziehpresse - Hydraulisch · Drahterodiermaschine · Drehmaschine - zyklengesteuert · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Ersatzteile · Exzenterpresse - Einständer · Fahrständerfräsmaschine · Fräsmaschine - Universal · Gewinderollmaschine · Gleitschleifanlage · Hydraulische Presse · Innenschleifmaschine · Kaltwalzmaschine · Karusselldrehmaschine - Einständer · Kegelradschleifmaschine · Kettenzug - elektrisch · Kompressor · Konsolfräsmaschine · Koordinatenmeßmaschine · Kreissägenautomat · Kurbelwellen-Hublagerschleifmaschine · Ladeportal · Laserschneidmaschine · Leit- und Zugspindeldrehmaschine · Mehrspindelbohrmaschine · Messerköpfe · Messmaschine · Messplatte · Nockenwellenschleifmaschine · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Profilbearbeitungszentrum · Profilschleifmaschine · Reitstock · Richtpresse - Einständer · Rundschleifmaschine - Außen · Schmiedehammer · Schnellradialbohrmaschine · Spiralkegelradschneidmaschine · Spitzendrehbank · Späneförderer · Stanzautomat-Doppelständer · Superfinishmaschine · Turbinenschaufelfräsmaschine · Tuschierpresse · Vertikaldrehmaschine · Werkstattpresse - hydraulisch · Werkzeugaufnahme · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal · Werkzeugschrank · Zahnflankenschleifmaschine · Zahnrad-Abwälzfräsmaschine - vertikal · Zahnradentgratmaschine · Zahnradschleifmaschine · Zahnradstossmaschine · Zubehör · Zweiflanken-Wälzprüfmaschine · Ölnebel-Abscheider · Ölzentrifuge ·