European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Window production centre

          Machinelist: Window production centre


          Window production centre

          used Window production: wood Window production centre WEINIG Unicontrol 6 CNC


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-2592 · Window production centre

          WEINIG - Unicontrol 6 CNC - - neuwertig - WEINIG PC-NEXUS

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱Control WEINIG PC-NEXUS
          # 2592 Weinig Unicontrol 6 with NC spindles ---------------------------- Machine is currently being checked and processed. Technical data summary (please inquire about any additional accessories included) Pos. 1: cross-cut saw ---------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max .: 400 mm > Motor power: 3.0 kW > Radially pneumatically controlled adjustment path to 8 positions, e.g. for edge rounding from above > Laser guide light to detect the saw section Electronic length stop, mounted on the slitting table, included Positioning of the cross-cut saw integrated in the control. > Length 3500 mm Pos. 2: Tenoning and slotted spindle ---------------------------- > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max .: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (synchronous spindle) ---------------------------- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max .: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ---------------------------- > Position: vertical right > Number of tools: variable, stepless adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max .: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle pneumatically controlled axially, 2 positions Rung guide consisting of: Guide ruler in the stop (area synchronous spindle), Rung support bar from above in the area of ??the profile milling unit, vertical right and profiling spindle. Pos. 5: Profile milling unit, horizontal above ---------------------------- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 6: 3rd profiling spindle (fitting spindle) ---------------------------- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 100 mm, 8 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Tool flight circle max .: 210 mm > Motor power: 3.0 kW Other features ---------------------------- > online capable > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Circulation device for tear-free circulation > Double part package > Return device for one-man operation: slat conveyor > Screen controls > Inclined window installation > Electronic angle display for sloping windows > Industrial PC, PC control / NEXUS > Including Weinig type production program Option: Used window tools The technical characteristics of this machine should match your ideas do not match, please contact us. Our A team with many years of experience will be happy to assist you with any adjustments or when looking for a machine that meets your requirements! (technical data according to the manufacturer - without guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
            Control WEINIG PC-NEXUS
            Description :
            # 2592 Weinig Unicontrol 6 with NC spindles
            ----------------------------
            Machine is currently being checked and processed.

            Technical data summary
            (please inquire about any additional accessories included)


            Pos. 1: cross-cut saw
            ----------------------------
            > Number of tools: 1 pc.
            > Spindle speed: 2,800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max .: 400 mm
            > Motor power: 3.0 kW
            > Radially pneumatically controlled adjustment path to 8 positions,
            e.g. for edge rounding from above
            > Laser guide light to detect the saw section

            Electronic length stop, mounted on the slitting table, included
            Positioning of the cross-cut saw integrated in the control.
            > Length 3500 mm

            Pos. 2: Tenoning and slotted spindle
            ----------------------------
            > Number of tools: variable, stepless adjustment NC axis
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool diameter max .: 320 mm
            > Motor power: 11 kW


            Pos. 3: 1st profiling spindle (synchronous spindle)
            ----------------------------
            > Position: vertical right
            > Number of tools: 1 pc.
            > Tool clamping length: 120 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max .: 232 mm
            > Motor power: 7.5 kW


            Pos. 4: 2nd profiling spindle
            ----------------------------
            > Position: vertical right
            > Number of tools: variable, stepless adjustment NC axis
            > Tool clamping length: 320 mm
            > Vertical spindle stroke: variable, stepless adjustment 254 mm NC axis
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool flight circle max .: 232 mm
            > Motor power: 11 kW

            2 feed rollers opposite the spindle pneumatically controlled axially, 2
            positions

            Rung guide consisting of:
            Guide ruler in the stop (area synchronous spindle),
            Rung support bar from above in the area of ??the profile milling unit, vertical
            right
            and profiling spindle.


            Pos. 5: Profile milling unit, horizontal above
            ----------------------------
            > Clamping length: 40 mm
            > Spindle diameter: 40 mm
            > Motor power: 3.0 kW
            > Speed ??9,000 rpm
            > Tool flight circle max. 130 mm
            > Axial adjustment range 30 mm, 8 positions
            > Radial adjustment range 125 mm, 8 positions


            Pos. 6: 3rd profiling spindle (fitting spindle)
            ----------------------------
            > Position: vertical right
            > Tool clamping length: 160 mm
            > Axial adjustment range 115 mm, 8 positions
            > Radial adjustment range 100 mm, 8 positions
            > Spindle speed: 5,850 rpm
            > Spindle diameter: 40 mm
            > Tool flight circle max .: 210 mm
            > Motor power: 3.0 kW

            Other features
            ----------------------------
            > online capable
            > Electric feed height adjustment including mechanical digital display
            and manual feed bar clamping
            > Circulation device for tear-free circulation
            > Double part package
            > Return device for one-man operation: slat conveyor
            > Screen controls
            > Inclined window installation
            > Electronic angle display for sloping windows
            > Industrial PC, PC control / NEXUS
            > Including Weinig type production program

            Option:
            Used window tools


            The technical characteristics of this machine should match your ideas
            do not match, please contact us. Our
            A team with many years of experience will be happy to assist you with any
            adjustments
            or when looking for a machine that meets your requirements!

            (technical data according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre HABERKORN Nutaggregat von unten


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-5968 · Window production centre

          HABERKORN - Nutaggregat von unten - - Neu -

          Technical details
          Tenoning spindle , ︱Number of milling agregates 1 St.︱Spindle diameter 40 mm︱
          Grooving unit Angle 700 x 600 mm height adjustable about 850 - 1000 mm Feed with 4 wheels, 4 speed Motor about 2.2 kW, 3000 rpm. Shaft diameter 40 mm, with left-hand threads Wavelength 80 mm Nuter pneumatic up-down Stop for Nuter top turret with 6 adjustable stop screws Absaugdurchmesser 80 mm Tool diameter max. 300 mm control: -------------- pre-installed with 16 A Euro plug 400 V AC, 2.9 KW, 50 Hz Colour: RAL 7035 light gray (technical details according to manufacturer - without guarantee!)
            Tenoning spindle ,
            Number of milling agregates 1 St.
            Spindle diameter 40 mm
            Description :
            Grooving unit Angle

            700 x 600 mm
            height adjustable about 850 - 1000 mm
            Feed with 4 wheels, 4 speed
            Motor about 2.2 kW, 3000 rpm.
            Shaft diameter 40 mm, with left-hand threads
            Wavelength 80 mm
            Nuter pneumatic up-down
            Stop for Nuter top turret
            with 6 adjustable stop screws
            Absaugdurchmesser 80 mm
            Tool diameter max. 300 mm

            control:
            --------------
            pre-installed with 16 A Euro plug
            400 V AC, 2.9 KW, 50 Hz

            Colour: RAL 7035 light gray

            (technical details according to manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-2603 · Window production centre

          WEINIG - Unicontrol 6 - - gebraucht -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱
          !! In order to sell !! # 2603 Weinig Unicontrol 6 ................................... Technical data summary (please inquire about any additional accessories included) ................................... Cross-cut saw ................................... > Pneumatically synchronized cross-cut saw > Number of tools: 1 pc. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max .: 350 mm > Motor power: 3 kW > Laser for cross-cut saw Length stop ................................... > manual length stop 2600 mm Tenoning and slotted spindle ................................... > Number of tools: 3/4 pcs. > Spindle stroke: 4 x 80 mm or 3 x 100 mm > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool clamping length: 320 mm > Tool diameter max .: 320 mm > Motor power: 11 kW 1. Profiling spindle - synchronous and counter-rotating ................................... > Number of tools: 1 pc. > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 120 mm > Tool diameter max .: 232 mm > Motor power: 7.5 kW 2. Profiling spindle ................................... > Number of tools: 3/4 pcs. > Vertical spindle stroke: 4 x 80 mm or 3 x 95 mm > Horizontal spindle stroke: 80 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 320 mm > Tool diameter max .: 232 mm > Motor power: 11 kW 3. Profiling spindle ................................... > Number of tools: 3 pcs. > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool clamping length: 160 mm > Motor power: 3 kW Additional units ................................... > Groove milling unit from above: 1 pc. 2 radial and 2 axial positions, clocked Motor: 3 kW 40x40x130 mm Other features ................................... > Circulation device for tear-free circulation > Double part package > Return device for one-man operation > Screen control 99 programs > Digital angle display for sloping windows > Studio window package 60 °, including electrical angle display > Workpiece return to the operator - swivel belt Option: Tools IV 68 wood and wood-aluminum (technical data according to the manufacturer - without guarantee!)
            Tenoning spindle 1 St.
            Number of milling agregates 5 St.
            Spindle diameter 50 mm
            Description :
            !! In order to sell !!

            # 2603 Weinig Unicontrol 6
            ...................................

            Technical data summary
            (please inquire about any additional accessories included)
            ...................................

            Cross-cut saw
            ...................................
            > Pneumatically synchronized cross-cut saw
            > Number of tools: 1 pc.
            > Spindle speed: 2800 rpm
            > Spindle diameter: 40 mm
            > Tool diameter max .: 350 mm
            > Motor power: 3 kW
            > Laser for cross-cut saw

            Length stop
            ...................................
            > manual length stop 2600 mm

            Tenoning and slotted spindle
            ...................................
            > Number of tools: 3/4 pcs.
            > Spindle stroke: 4 x 80 mm or 3 x 100 mm
            > Spindle speed: 3500 rpm
            > Spindle diameter: 50 mm
            > Tool clamping length: 320 mm
            > Tool diameter max .: 320 mm
            > Motor power: 11 kW

            1. Profiling spindle - synchronous and counter-rotating
            ...................................

            > Number of tools: 1 pc.
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool clamping length: 120 mm
            > Tool diameter max .: 232 mm
            > Motor power: 7.5 kW

            2. Profiling spindle
            ...................................

            > Number of tools: 3/4 pcs.
            > Vertical spindle stroke: 4 x 80 mm or 3 x 95 mm
            > Horizontal spindle stroke: 80 mm
            > Spindle speed: 6000 rpm
            > Spindle diameter: 50 mm
            > Tool clamping length: 320 mm
            > Tool diameter max .: 232 mm
            > Motor power: 11 kW

            3. Profiling spindle
            ...................................

            > Number of tools: 3 pcs.
            > Spindle speed: 5850 rpm
            > Spindle diameter: 40 mm
            > Tool clamping length: 160 mm
            > Motor power: 3 kW

            Additional units
            ...................................

            > Groove milling unit from above: 1 pc.
            2 radial and 2 axial positions, clocked
            Motor: 3 kW
            40x40x130 mm

            Other features
            ...................................
            > Circulation device for tear-free circulation
            > Double part package
            > Return device for one-man operation
            > Screen control 99 programs
            > Digital angle display for sloping windows
            > Studio window package 60 °, including electrical angle display
            > Workpiece return to the operator - swivel belt

            Option: Tools IV 68 wood and wood-aluminum


            (technical data according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 12 CNC Spindeln


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6718 · Window production centre

          WEINIG - Unicontrol 12 CNC Spindeln - - gebraucht -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱
          Machine is in operation and can be visited! Weinig Unicontrol 12 CNC - Spindles radial and axial CNC controlled -------------------------------------------------- ------------ With the following processing units: Cutting edge saw -------------------------------------------------- ------------ With laser beam, engine power 3 KW, spindle diameter 40 mm, Tool flying circle 400 mm Axial adjustment via NC axis Adjustment radial pneumatic to 8 positions f. Edge rounding from above Unit from below for edge rounding -------------------------------------------------- ------------ Axial adjustment with crosscut saw Motor 1,5 kW Diameter 20 mm Clamping length 25 mm Tooling circle max. 130 mm Adjustment distance radial pneumatic on / off Spindle and slotted spindle -------------------------------------------------- ------------ Engine power 15 KW Spindle diameter 50 mm Spindle speed 2.800 rpm Tooling circle max. 380 Tool clamping length 640 mm Adjustment axial CNC axis Adjustment travel axial 580 mm Adjustment speed 100 mm / sec. Postprocessing bracket, profile depth 50 mm 1. Profile spindle (same and opposite) -------------------------------------------------- ------------ Engine power 11 KW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axial and radial adjustment via CNC - axis, infinitely variable Profile milling unit horizontal top -------------------------------------------------- ------------ Motor power 3,7 KW Spindle diameter 40 mm Clamping length 40 mm Tool diameter: max. 130 mm Spindle speed 9,000 rpm Adjustment pneumatic to 8 positions axial and radial 2. Profile spindle -------------------------------------------------- ------------ Engine power 11 KW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axial and radial adjustment via CNC - axis - infinitely variable Profile milling unit vertical right at the end of the machine -------------------------------------------------- ------------ Motor power 3,7 KW Spindle diameter 40 mm Adjustment distance max .: 160 mm Spindle speed 5.850 rpm Tooling circle max: 210 mm Adjustment pneumatic to 8 positions axial and radial Profile milling unit horizontally at the bottom in the additional stand -------------------------------------------------- ------------ Engine power 3 KW Spindle diameter 40 mm, Adjustment distance max: 125 mm Spindle speed 5.850 rpm Tool flying circle 200 mm Adjustment pneumatic to 8 positions axial and radial Other accessories -------------------------------------------------- ------------ Length stop CNC - controlled, mounted on the slot table For lengths up to 3500 mm, incl. Positioned cut-off saw integrated in control system. Studio window device, max. 75 ° swivel on both sides Double pack package with automatic separation and transfer Feed rollers are axially clocked with respect to the shaping spindle For narrow and short parts NC axis for feed - height adjustment Rung support strip pneumatically controlled from above for a fold depth Shuttle package: - Synchronization unit with automatic immersion on the 1st profile spindle - Support rail - High / low feed rollers up to the 2nd profile spindle to the Shortening of the path - Software expansion with 100 free encapsulation types Milling trolley for the milling of wings with frame widths of less than 500 mm Automatic pneumatic clamping Central lubrication automatically Air pressure accumulator 40 L PC control NEXUS Automatic reversing system Slat conveyor, including conveyor belt for returning the workpieces To the operator Suction nozzle diameter: Saw: 80 mm Beveling unit under saw: 80 mm Slotted spindle: 140 mm 1. Profile spindle: 140 mm Groove unit from above: 80 mm 2. Profile spindle: 140 mm Fitting spindle 120 mm Groove unit from below: 80 mm Option: ******* used window tools (Technical data according to manufacturer - without guarantee).
            Tenoning spindle 1 St.
            Number of milling agregates 5 St.
            Spindle diameter 50 mm
            Description :
            Machine is in operation and can be visited!

            Weinig Unicontrol 12 CNC - Spindles radial and axial CNC controlled
            -------------------------------------------------- ------------
            With the following processing units:

            Cutting edge saw
            -------------------------------------------------- ------------
            With laser beam, engine power 3 KW, spindle diameter 40 mm,
            Tool flying circle 400 mm
            Axial adjustment via NC axis
            Adjustment radial pneumatic to 8 positions f. Edge rounding from above

            Unit from below for edge rounding
            -------------------------------------------------- ------------
            Axial adjustment with crosscut saw
            Motor 1,5 kW
            Diameter 20 mm
            Clamping length 25 mm
            Tooling circle max. 130 mm
            Adjustment distance radial pneumatic on / off


            Spindle and slotted spindle
            -------------------------------------------------- ------------
            Engine power 15 KW
            Spindle diameter 50 mm
            Spindle speed 2.800 rpm
            Tooling circle max. 380
            Tool clamping length 640 mm
            Adjustment axial CNC axis
            Adjustment travel axial 580 mm
            Adjustment speed 100 mm / sec.
            Postprocessing bracket, profile depth 50 mm

            1. Profile spindle (same and opposite)
            -------------------------------------------------- ------------
            Engine power 11 KW
            Spindle diameter 50 mm
            Spindle speed 6,000 rpm
            Tool clamping length 400 mm with counter bearing
            Axial and radial adjustment via CNC - axis, infinitely variable

            Profile milling unit horizontal top
            -------------------------------------------------- ------------
            Motor power 3,7 KW
            Spindle diameter 40 mm
            Clamping length 40 mm
            Tool diameter: max. 130 mm
            Spindle speed 9,000 rpm
            Adjustment pneumatic to 8 positions axial and radial


            2. Profile spindle
            -------------------------------------------------- ------------
            Engine power 11 KW
            Spindle diameter 50 mm
            Spindle speed 6,000 rpm
            Tool clamping length 400 mm with counter bearing
            Axial and radial adjustment via CNC - axis - infinitely variable


            Profile milling unit vertical right at the end of the machine
            -------------------------------------------------- ------------
            Motor power 3,7 KW
            Spindle diameter 40 mm
            Adjustment distance max .: 160 mm
            Spindle speed 5.850 rpm
            Tooling circle max: 210 mm
            Adjustment pneumatic to 8 positions axial and radial


            Profile milling unit horizontally at the bottom in the additional stand
            -------------------------------------------------- ------------
            Engine power 3 KW
            Spindle diameter 40 mm,
            Adjustment distance max: 125 mm
            Spindle speed 5.850 rpm
            Tool flying circle 200 mm
            Adjustment pneumatic to 8 positions axial and radial


            Other accessories
            -------------------------------------------------- ------------

            Length stop CNC - controlled, mounted on the slot table
            For lengths up to 3500 mm, incl. Positioned cut-off saw integrated in control
            system.

            Studio window device, max. 75 ° swivel on both sides

            Double pack package with automatic separation and transfer

            Feed rollers are axially clocked with respect to the shaping spindle
            For narrow and short parts

            NC axis for feed - height adjustment

            Rung support strip pneumatically controlled from above for a fold depth

            Shuttle package:
            - Synchronization unit with automatic immersion on the 1st profile spindle
            - Support rail
            - High / low feed rollers up to the 2nd profile spindle to the
            Shortening of the path
            - Software expansion with 100 free encapsulation types

            Milling trolley for the milling of wings with frame widths of less than 500 mm
            Automatic pneumatic clamping

            Central lubrication automatically

            Air pressure accumulator 40 L

            PC control NEXUS

            Automatic reversing system
            Slat conveyor, including conveyor belt for returning the workpieces
            To the operator

            Suction nozzle diameter:
            Saw: 80 mm
            Beveling unit under saw: 80 mm
            Slotted spindle: 140 mm
            1. Profile spindle: 140 mm
            Groove unit from above: 80 mm
            2. Profile spindle: 140 mm
            Fitting spindle 120 mm
            Groove unit from below: 80 mm


            Option:
            *******
            used window tools

            (Technical data according to manufacturer - without guarantee).
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Fensteranlage CNC


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6704 · Window production centre

          WEINIG - Fensteranlage CNC - - 2008 -

          Technical details
          Tenoning spindle 3 St.︱Number of milling agregates 8 St.︱Spindle diameter 50 mm︱Control
          Weinig UC-Matic window production line ----------------------------------------- Weinig Powermat 500 + Weinig Unirex 2000 + Weinig Unicontrol 15 ! Line can still be viewed in use! Consisting of: ----------------------------------------- Pos 1: feed conveyor Pos. 2: Weinig Powermat 500 Working width 230 mm, working height 120 mm, 5 spindles + glazing bead saw: 1. below, 7.5 kW, diameter 40 mm, 8,000 rpm 2nd right, 7.5 kW, diameter 40 mm, 8,000 rpm 3rd left, 11.0 kW, diameter 40 mm, 8,000 rpm 4. above, 11.0 kW, PowerLock / HSK, 8,000 rpm 5. below, 7.5 kW, PowerLock / HSK, 8,000 rpm 6. Glass bead saw from above Pos. 3: longitudinal conveyor belt Pos. 4 and 5: Cross conveyor with transfer to Weinig Unicontrol 15 Pos. 6: Weinig Unitech 15, tenon slot unit: 1 stepless cross-cut saw with edge rounder from above 1 edge rounding unit from below 3 slotted spindles, each - 640 mm clamping length - Axial stepless adjustment with NC axis - diameter 50 mm - caster counter Pos. 7,8,9 transport system with turning device for 2nd run in Unitech 15 Pos. 10 and 11 cross conveyor and longitudinal transport in grinding machine Pos 12: Stähle-Hess single wood grinder from above and below Pos. 12 A: outfeed conveyor belt Pos 13: Conveyor system in the drilling and milling center Weinig Unirex 2000 Pos 13 A and Pos 14 Weinig Unirex 2000 Drilling and milling center with various units for the horizontal and vertical machining of the workpieces Pos. 15, 16, 17: Cross conveyors and conveyor belts to Weinig Univar 12 Pos 18: Longitudinal profiling machine Weinig Univar 12 4 profile spindles, vertical right each - 400 mm clamping length - Axial adjustment steplessly 350 mm NC axis - Radial adjustment steplessly 80 mm NC axis - diameter 50 mm 1 vertical profile milling unit on the right 3 grooving spindles working from above 1 grooved spindle working from below Pos 19 outfeed transport belt Pos 20 out feed transport system for putting off the work pieces Machine without processing tools. (techncial details according to manufacturer - without guarantee!)
            Tenoning spindle 3 St.
            Number of milling agregates 8 St.
            Spindle diameter 50 mm
            Description :
            Weinig UC-Matic window production line
            -----------------------------------------

            Weinig Powermat 500 + Weinig Unirex 2000 + Weinig Unicontrol 15

            ! Line can still be viewed in use!

            Consisting of:
            -----------------------------------------

            Pos 1: feed conveyor

            Pos. 2: Weinig Powermat 500

            Working width 230 mm, working height 120 mm,
            5 spindles + glazing bead saw:
            1. below, 7.5 kW, diameter 40 mm, 8,000 rpm
            2nd right, 7.5 kW, diameter 40 mm, 8,000 rpm
            3rd left, 11.0 kW, diameter 40 mm, 8,000 rpm
            4. above, 11.0 kW, PowerLock / HSK, 8,000 rpm
            5. below, 7.5 kW, PowerLock / HSK, 8,000 rpm
            6. Glass bead saw from above

            Pos. 3: longitudinal conveyor belt

            Pos. 4 and 5: Cross conveyor with transfer to Weinig Unicontrol 15

            Pos. 6: Weinig Unitech 15, tenon slot unit:
            1 stepless cross-cut saw with edge rounder from above
            1 edge rounding unit from below
            3 slotted spindles, each
            - 640 mm clamping length
            - Axial stepless adjustment with NC axis
            - diameter 50 mm
            - caster counter

            Pos. 7,8,9 transport system with turning device
            for 2nd run in Unitech 15

            Pos. 10 and 11 cross conveyor and longitudinal transport in grinding machine

            Pos 12: Stähle-Hess single wood grinder from above and below

            Pos. 12 A: outfeed conveyor belt

            Pos 13: Conveyor system in the drilling and milling center Weinig Unirex 2000

            Pos 13 A and Pos 14 Weinig Unirex 2000
            Drilling and milling center with various units for the
            horizontal and vertical machining of the workpieces

            Pos. 15, 16, 17: Cross conveyors and conveyor belts to Weinig Univar 12

            Pos 18: Longitudinal profiling machine Weinig Univar 12

            4 profile spindles, vertical right each
            - 400 mm clamping length
            - Axial adjustment steplessly 350 mm NC axis
            - Radial adjustment steplessly 80 mm NC axis
            - diameter 50 mm

            1 vertical profile milling unit on the right
            3 grooving spindles working from above
            1 grooved spindle working from below

            Pos 19 outfeed transport belt

            Pos 20 out feed transport system for putting off the work pieces

            Machine without processing tools.

            (techncial details according to manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          used Window production: wood Window production centre WEINIG Unicontrol 6


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6167 · Window production centre

          WEINIG - Unicontrol 6 - - -

          Technical details
          Tenoning spindle 1 St.︱Number of milling agregates 4 St.︱Spindle diameter 50 mm︱
            Tenoning spindle 1 St.
            Number of milling agregates 4 St.
            Spindle diameter 50 mm
          Datasheet
          Request / Contact
          used Window production: wood Window production centre SCM Windor 40 R CNC


          • Gebr. Engelfried oHG
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-8431
          • info@engelfried.com
            www.engelfried.com
          #1305-6711 · Window production centre

          SCM - Windor 40 R CNC - - - CNC "Control 100 P.C.

          Technical details
          Tenoning spindle 2 St.︱Number of milling agregates 5 St.︱Spindle diameter 50 mm︱Control CNC "Control 100 P.C.
          SCM WINDOR 40 R with 2 slot spindles + 11 kW milling unit with tool changer ------------------------------------------ Pos. 1: cross-cut saw ------------------------------------------ - Motor power 4 kW - speed 3,000 rpm - Spindle diameter 40 mm - saw blade bore 80 mm - max.tool diameter 400 mm Pos. 2: Tenoning / slotted spindle no.1 ------------------------------------------ - High-performance spindle with top bearing - 620 mm length, diameter 50 mm - Motor power 11 kW - speed 3,000 rpm - Max. Tool diameter 370 mm - Axis run under work table 575 mm - Jolly automatic anti-splinter device - Vertical positioning via freely programmable axis control Pos. 3: Power 2000: Electro spindle with HSK 63F tool holder ------------------------------------------ for all drilling and milling for windows and doors - min / max. Rotation speed 1000-12000 rpm by static inverter - max.motor power 15 HP (11 kW) from 11000 up to 18000 rpm - water cooling - quick vertical adjustment via brushless motors - Vector rotation axis for electrospindle rotation to 360 ° - RAPID 24 autom. Tool changer - max. 230 mm - 24 tool places - 10 kg. max.weight per tool - 100 kg. max.weight on the tool magazine Pos. 4: Tenoning / slotted spindle no.2 ------------------------------------------ - High-performance spindle with top bearing - 620 mm length, diameter 50 mm - Motor power 11 kW - speed 3,000 rpm - Max. Tool diameter 370 mm - Axis run under work table 575 mm - Jolly automatic anti-splinter device - Vertical positioning via freely programmable axis control Pos. 5: Profiling spindle no.1 ------------------------------------------ - 320 mm length, diameter 50 mm - Motor power 7.5 kW - speed 6,000 rpm - min./max. Tool diameter 130-240 mm - Axis run under work table 280 mm - Vertical positioning via freely programmable axis control - Horizontal positioning via freely programmable axis control - Right / left rotation - Synchronous immersion function Pos. 6: Profiling spindle no.2 ------------------------------------------ - 320 mm length, diameter 50 mm - Motor power 7.5 kW - speed 6,000 rpm - min./max. Tool diameter 130-240 mm - Axis run under work table 280 mm - Vertical positioning via freely programmable axis control - Horizontal positioning via freely programmable axis control Pos. 7: Profiling spindle no.3 ------------------------------------------ - 320 mm length, diameter 50 mm - Motor power 7.5 kW - speed 6,000 rpm - min./max. Tool diameter 130-240 mm - Axis run under work table 280 mm - Vertical positioning via freely programmable axis control - Horizontal positioning via freely programmable axis control Pos. 8 above: Working unit for separating the glazing beads ------------------------------------------ - spindle diameter 30 mm; Length 30 mm - max.tool width 22 mm - Motor power 3 kW - speed 6000 rpm - Saw blade diameter 220 mm - Glazing bead holding device and guide - Vertical positioning via freely programmable axis control - Horizontal positioning via freely programmable axis control Other features: Interpolating rotations for two tenon units ------------------------------------------ Device to autom. Manufacture of tenons with an inclination of +/- 60 ° - Motor power on both trunnion units 11 kW each - Max. Tool diameter on both tenon units 370 mm - Software and hardware changes Rebate trolley for narrow leaves Workpiece return Control "CONTROL 100 PC" ------------------------------------------ CONTROL 100 PC is a control unit structured on two levels. The first Level consists of the numerical machine control (PLC) that is responsible for the Functions to control the machine is responsible. The second level consists from a personal computer that communicates with the PLC and the human Represents machine interface. The personal computer also offers the Possibility to connect any external units for data processing. The monitoring program NEXT, specially developed by SCM, is installed on the PC for the complete management of the machines and programmable systems with controlled positioning axes was developed. With this system it is possible to keep the processing data always resident in the memory and through simply typing the appropriate name on the keyboard. Each The machining program takes care of the positioning of the relevant units, which are equipped with controlled axes. Saving, deleting or Editing of the work programs can be done conveniently via the keyboard as well as the correction of the tool position. Via a network card (on request) is the connection with external units (management systems or other PCs) to receive or transmit processing data (the software required for data exchange is not included in the Standard scope of delivery of the control included). The machine is standard equipped with a remote maintenance program (Telesolve), which can be accessed via a PC Integrated modem troubleshooting via an with the SCM customer service center connected ISDN telephone line enables. CONTROL UNIT FOR MULTIPLE AXES Hardware characteristics of the personal computer: - PC PENTIUM 400 MHz - 128 KB cache - 64 MB RAM - Floppy disk drive, capacity 1.44 Mbytes - CD-ROM 32x - Color screen with 15 "CRT SVGA-AGP - 4.3 GB hard drive - mouse - 2 serial interfaces 232, USB, PS2 - parallel interface TECHNICAL SPECIFICATIONS ------------------------------------------ Min. Workpiece length (clear tenon dimension): 200 mm Max. Workpiece length (in relation to the stops): 3,200 mm Min. Workpiece width: 40 mm Max. Workpiece width: 200 mm Min. Workpiece height: 30 mm Max. Workpiece height: 130 mm Option: used tools (technical information according to the manufacturer - without guarantee!)
            Tenoning spindle 2 St.
            Number of milling agregates 5 St.
            Spindle diameter 50 mm
            Control CNC "Control 100 P.C.
            Description :
            SCM WINDOR 40 R with 2 slot spindles + 11 kW milling unit with tool changer
            ------------------------------------------

            Pos. 1: cross-cut saw
            ------------------------------------------
            - Motor power 4 kW
            - speed 3,000 rpm
            - Spindle diameter 40 mm
            - saw blade bore 80 mm
            - max.tool diameter 400 mm

            Pos. 2: Tenoning / slotted spindle no.1
            ------------------------------------------
            - High-performance spindle with top bearing
            - 620 mm length, diameter 50 mm
            - Motor power 11 kW
            - speed 3,000 rpm
            - Max. Tool diameter 370 mm
            - Axis run under work table 575 mm
            - Jolly automatic anti-splinter device
            - Vertical positioning via freely programmable axis control

            Pos. 3: Power 2000: Electro spindle with HSK 63F tool holder
            ------------------------------------------
            for all drilling and milling for windows and doors

            - min / max. Rotation speed 1000-12000 rpm by static inverter
            - max.motor power 15 HP (11 kW) from 11000 up to 18000 rpm
            - water cooling
            - quick vertical adjustment via brushless motors
            - Vector rotation axis for electrospindle rotation to 360 °
            - RAPID 24 autom. Tool changer
            - max. 230 mm
            - 24 tool places
            - 10 kg. max.weight per tool
            - 100 kg. max.weight on the tool magazine

            Pos. 4: Tenoning / slotted spindle no.2
            ------------------------------------------
            - High-performance spindle with top bearing
            - 620 mm length, diameter 50 mm
            - Motor power 11 kW
            - speed 3,000 rpm
            - Max. Tool diameter 370 mm
            - Axis run under work table 575 mm
            - Jolly automatic anti-splinter device
            - Vertical positioning via freely programmable axis control

            Pos. 5: Profiling spindle no.1
            ------------------------------------------
            - 320 mm length, diameter 50 mm
            - Motor power 7.5 kW
            - speed 6,000 rpm
            - min./max. Tool diameter 130-240 mm
            - Axis run under work table 280 mm
            - Vertical positioning via freely programmable axis control
            - Horizontal positioning via freely programmable axis control
            - Right / left rotation
            - Synchronous immersion function

            Pos. 6: Profiling spindle no.2
            ------------------------------------------
            - 320 mm length, diameter 50 mm
            - Motor power 7.5 kW
            - speed 6,000 rpm
            - min./max. Tool diameter 130-240 mm
            - Axis run under work table 280 mm
            - Vertical positioning via freely programmable axis control
            - Horizontal positioning via freely programmable axis control

            Pos. 7: Profiling spindle no.3
            ------------------------------------------
            - 320 mm length, diameter 50 mm
            - Motor power 7.5 kW
            - speed 6,000 rpm
            - min./max. Tool diameter 130-240 mm
            - Axis run under work table 280 mm
            - Vertical positioning via freely programmable axis control
            - Horizontal positioning via freely programmable axis control

            Pos. 8 above: Working unit for separating the glazing beads
            ------------------------------------------
            - spindle diameter 30 mm; Length 30 mm
            - max.tool width 22 mm
            - Motor power 3 kW
            - speed 6000 rpm
            - Saw blade diameter 220 mm
            - Glazing bead holding device and guide
            - Vertical positioning via freely programmable axis control
            - Horizontal positioning via freely programmable axis control

            Other features:

            Interpolating rotations for two tenon units
            ------------------------------------------
            Device to autom. Manufacture of tenons with an inclination of +/- 60 °
            - Motor power on both trunnion units 11 kW each
            - Max. Tool diameter on both tenon units 370 mm
            - Software and hardware changes

            Rebate trolley for narrow leaves

            Workpiece return

            Control "CONTROL 100 PC"
            ------------------------------------------
            CONTROL 100 PC is a control unit structured on two levels. The first
            Level consists of the numerical machine control (PLC) that is responsible for
            the
            Functions to control the machine is responsible. The second level consists
            from a personal computer that communicates with the PLC and the human
            Represents machine interface. The personal computer also offers the
            Possibility to connect any external units for data processing.
            The monitoring program NEXT, specially developed by SCM, is installed on the PC
            for the complete management of the machines and programmable systems with
            controlled positioning axes was developed. With this system it is
            possible to keep the processing data always resident in the memory and through
            simply typing the appropriate name on the keyboard. Each
            The machining program takes care of the positioning of the relevant units,
            which are equipped with controlled axes. Saving, deleting or
            Editing of the work programs can be done conveniently via the keyboard
            as well as the correction of the tool position. Via a network card
            (on request) is the connection with external units (management systems
            or other PCs) to receive or transmit processing data
            (the software required for data exchange is not included in the
            Standard scope of delivery of the control included). The machine is standard
            equipped with a remote maintenance program (Telesolve), which can be accessed
            via a PC
            Integrated modem troubleshooting via an with the SCM customer service center
            connected ISDN telephone line enables.


            CONTROL UNIT FOR MULTIPLE AXES

            Hardware characteristics of the personal computer:
            - PC PENTIUM 400 MHz
            - 128 KB cache
            - 64 MB RAM
            - Floppy disk drive, capacity 1.44 Mbytes
            - CD-ROM 32x
            - Color screen with 15 "CRT SVGA-AGP
            - 4.3 GB hard drive
            - mouse
            - 2 serial interfaces 232, USB, PS2
            - parallel interface

            TECHNICAL SPECIFICATIONS
            ------------------------------------------

            Min. Workpiece length (clear tenon dimension): 200 mm
            Max. Workpiece length (in relation to the stops): 3,200 mm
            Min. Workpiece width: 40 mm
            Max. Workpiece width: 200 mm
            Min. Workpiece height: 30 mm
            Max. Workpiece height: 130 mm

            Option: used tools

            (technical information according to the manufacturer - without guarantee!)
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          WEINIG - SCM - HABERKORN -