European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Portable saw

          Machinelist: Portable saw


          Mitre circular saw

          used Saws Mitre circular saw GRAULE ZS 200 N 5 kW


          • Rauscher & Reyhing GmbH
          • Meidelstetter Str. 13
          • 72531 Hohenstein
          • Deutschland

          • (0049)7387 988414
            (0049)7387 988429
          • wolfgang.rauscher@rauscher-reyhing.de
            www.rauscher-reyhing.de
          #1314-38098 · Mitre circular saw

          GRAULE - ZS 200 N 5 kW - - 2022 -

          Technical details
          200 mm︱cutting length 420 mm︱ 5 kW︱
            200 mm
            cutting length 420 mm
            5 kW


        • Rauscher & Reyhing GmbH
        • Meidelstetter Str. 13
        • 72531 Hohenstein
        • Deutschland

        • Datasheet
          Request / Contact

          Mitre saw

          used Saws Mitre saw GRAULE ZS 135


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5051 · Mitre saw

          GRAULE - ZS 135 - - neu -

          Technical details
          cutting width 430 mm︱Cutting height 135 mm︱Motor output 2 kW︱Dimensions (L/W/H) 1100x700x800 mm︱machine weight ab. 110 kg︱
          # 5051 Graule Crosscut Saw ZS 135, new -------------------------------------------------- ----------------------------------------------- - Crosscut and miter saw with a maximum cutting height of 135 mm - Sturdy cast iron - Precise ball bearing guide of the tool carriage on hardened and ground steel shafts - Manual feed - Rapid miter setting up to 65 ° - Re-adjustable positive stops - Lower blade guard can be connected to suction Technical specifications: --------------------------------- - Motor: 400 V / 2.0 kW - Speed: 3800 U / min - Cutting length: 440 mm (at 90 °) - Cutting height: 135 mm (at 90 °) - Miter horiz .: 45 ° -90 ° -25 ° - Saw blade Ø 350 mm - Suction 100 mm - 110 kg Crosscut and miter saws Accessories for -------------------------------------------------- ------------------------------------- All Crosscut and miter saws are in the basic equipment without blade Hydraulic feed brake (for type ZS 85 N to ZS 170 N) Price on request! Hydraulic feed brake (for type ZS 200 and ZS 200 N) Price on request! Pneumatic Sägeblattsprüheinrichtung Price on request! Pneumatic material clamping left side for types ZS 85 Price on request! Pneumatic material clamping on both sides of the top for the types ZS 135 ZS 200 N up Price on request! Pneumatic maintenance unit, consisting of water, pressure reducing valve with pressure gauge and lubricator Price on request! Pressure reducing valve with manometer Price on request! Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS 85 E, suitable for cutting cable channels, sectional area at 45 ° inclined: 72 mm x 380 mm Price on request! Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for cutting thin sheet steel channels Price on request! Machine stand for the types ZS 85 N, NS ZS 85, ZS 85 NS-SW, IS 135 and IS 170 Price on request! Machine stand for the types ZS 135 N and ZS 170 N Price on request! Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left with Scale and stop slide (for types ZS 85 N to ZS 170 N) Price on request! 3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N) Price on request! Cross ruler to cut acute angles (not type ZS 85) Price on request! Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °, 90 ° from the middle of (type ZS 170 N) Price on request! Holding device for angular aperture in Rolladenbau (only types ZS 135 ZS to 200 N) Price on request! Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting height 215 mm for the Rolladenbau Price on request! Digital angle display for horizontal angle adjustment Price on request! Digital angle indicator for horizontal and vertical angle adjustment (both sides tiltable only in conjunction with machine) Price on request! Laser device, laser beam of about 300 mm line length Price on request! Hydropneumatic feed unit with two-hand safety control (only for the application of aluminum machining) Price on request! Motorized miter for horizontal and vertical angle adjustment with nominal / actual display Price on request! Motorized miter for horizontal angle adjustment with nominal / actual display Price on request! Motorized miter for vertical angle adjustment with nominal / actual display Price on request! Chip bag with zipper for emptying (Machine type) Price on request! Suction mobile with 2.5 mtr. Hose, 400 V (not allowed in the commercial sector for wood dust) Price on request! Suction mobile with 2.5 mtr. Hose, 400 V clean air system with Approval "H2" Price on request! Automatic switch for machine with suction system Price on request! Special cutting lengths up to approx 600 mm on request Blades: --------------------- HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg Price on request! HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg Price on request! HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ neg (short service life) Price on request! HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg Price on request! HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg Price on request! HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg Price on request! HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg Price on request! HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg Price on request! HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg Price on request! HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg Price on request! HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg Price on request! HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg Price on request! techn. Details according to manufacturer - ohn guarantee! All genes mentioned here prices are excl. Of VAT currently valid. (Domestic)
            cutting width 430 mm
            Cutting height 135 mm
            Motor output 2 kW
            Dimensions (L/W/H) 1100x700x800 mm
            machine weight ab. 110 kg
            Description :
            # 5051 Graule Crosscut Saw ZS 135, new
            --------------------------------------------------
            -----------------------------------------------

            - Crosscut and miter saw with a maximum cutting height of 135 mm
            - Sturdy cast iron
            - Precise ball bearing guide of the tool carriage on hardened and ground steel
            shafts
            - Manual feed
            - Rapid miter setting up to 65 °
            - Re-adjustable positive stops
            - Lower blade guard can be connected to suction

            Technical specifications:
            ---------------------------------

            - Motor: 400 V / 2.0 kW
            - Speed: 3800 U / min
            - Cutting length: 440 mm (at 90 °)
            - Cutting height: 135 mm (at 90 °)
            - Miter horiz .: 45 ° -90 ° -25 °
            - Saw blade Ø 350 mm
            - Suction 100 mm
            - 110 kg

            Crosscut and miter saws Accessories for
            --------------------------------------------------
            -------------------------------------
            All Crosscut and miter saws are in the basic equipment without blade

            Hydraulic feed brake (for type ZS 85 N to ZS 170 N)
            Price on request!

            Hydraulic feed brake (for type ZS 200 and ZS 200 N)
            Price on request!

            Pneumatic Sägeblattsprüheinrichtung
            Price on request!

            Pneumatic material clamping left side for types ZS 85
            Price on request!

            Pneumatic material clamping on both sides of the top for the types ZS 135 ZS
            200 N up
            Price on request!

            Pneumatic maintenance unit, consisting of water, pressure reducing valve with
            pressure gauge and lubricator
            Price on request!

            Pressure reducing valve with manometer
            Price on request!

            Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS
            85 E,
            suitable for cutting cable channels, sectional area at 45 ° inclined: 72 mm x
            380 mm
            Price on request!

            Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for
            cutting thin sheet steel channels
            Price on request!

            Machine stand for the types ZS 85 N, NS ZS 85, ZS 85 NS-SW, IS 135 and IS 170
            Price on request!

            Machine stand for the types ZS 135 N and ZS 170 N
            Price on request!

            Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left
            with
            Scale and stop slide (for types ZS 85 N to ZS 170 N)
            Price on request!

            3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N)
            Price on request!

            Cross ruler to cut acute angles (not type ZS 85)
            Price on request!

            Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °, 90
            ° from the middle of (type ZS 170 N)
            Price on request!

            Holding device for angular aperture in Rolladenbau (only types ZS 135 ZS to 200
            N)
            Price on request!

            Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting
            height 215 mm for the Rolladenbau
            Price on request!

            Digital angle display for horizontal angle adjustment
            Price on request!

            Digital angle indicator for horizontal and vertical angle adjustment (both
            sides tiltable only in conjunction with machine)
            Price on request!

            Laser device, laser beam of about 300 mm line length
            Price on request!

            Hydropneumatic feed unit with two-hand safety control (only for the application
            of aluminum machining)
            Price on request!

            Motorized miter for horizontal and vertical angle adjustment with nominal /
            actual display
            Price on request!

            Motorized miter for horizontal angle adjustment with nominal / actual display
            Price on request!

            Motorized miter for vertical angle adjustment with nominal / actual display
            Price on request!

            Chip bag with zipper for emptying (Machine type)
            Price on request!

            Suction mobile with 2.5 mtr. Hose, 400 V (not allowed in the commercial sector
            for wood dust)
            Price on request!

            Suction mobile with 2.5 mtr. Hose, 400 V clean air system with Approval "H2"
            Price on request!

            Automatic switch for machine with suction system
            Price on request!

            Special cutting lengths up to approx 600 mm on request


            Blades:
            ---------------------
            HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg
            Price on request!

            HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ
            neg (short service life)
            Price on request!

            HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg
            Price on request!

            HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg
            Price on request!

            HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg
            Price on request!

            HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg
            Price on request!

            HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg
            Price on request!

            HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg
            Price on request!

            techn. Details according to manufacturer - ohn guarantee!
            All genes mentioned here prices are excl. Of VAT currently valid. (Domestic)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Mitre saw GRAULE ZS 170 N


          • Engelfried Maschinentechnik GmbH
          • Elisabethenstr. 41
          • 73432 Aalen
          • Deutschland

          • (0049)07361-98660
            (0049)07361-986640
          • info@engelfried.com
            www.engelfried.com
          #1305-5052 · Mitre saw

          GRAULE - ZS 170 N - - neu -

          Technical details
          cutting width 420 mm︱Cutting height ja mm︱Motor output 2 kW︱Cutting height at 45° 115 mm︱Dimensions (L/W/H) 1100x700x800 mm︱machine weight ab. 150 kg︱
          # 5052 Graule cutting and miter saw ZS 170 N, new -------------------------------------------------- ------------------------------ ----------------- - Crosscut and miter saw with a maximum cutting height of 170 mm - Cast iron construction - Precise ball bearing guide of the tool carrier on hardened and grinded steel shafts - Manual feed - Rapid miter setting up to 65 ° horizontally and 45 ° vertically (up 60 ° ZS 200N) - Re-adjustable positive stops - Lower blade guard can be connected to suction Technical Specifications: --------------------------------- - Motor: 400 V / 2.0 kW - Speed: 3500 U / min - Cutting length: 430 mm (at 90 °) - Cutting height: 170 mm (at 90 °) - Miter horiz .: 45 ° -90 ° -25 ° - Miter verti .: 90 ° -45 ° (left) - Saw blade Ø 420 mm - Suction 100 mm - 120 kg Accessories for Crosscut and miter saws -------------------------------------------------- ------------------------------ ------- All Crosscut and miter saws are the basic equipment without Sawblade Hydraulic feed brake (for type ZS 85 N to ZS 170 N) Price On Request! Hydraulic feed brake (for type ZS 200 and ZS 200 N) Price On Request! Pneumatic Sägeblattsprüheinrichtung Price On Request! Pneumatic material clamping left side for types ZS 85 Price On Request! Pneumatic material clamping on both sides of the top for the types ZS 135 to ZS 200 N Price On Request! Pneumatic maintenance unit, consisting of water, Pressure reducing valve with pressure gauge and lubricator Price On Request! Pressure reducing valve with pressure gauge Price On Request! Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS 85 E, suitable inclined to cut cable ducts Cutting Capacity at 45 °: 72 mm x 380 mm Price On Request! Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for Cutting of thin-walled sheet steel channels Price On Request! Machine stand for the types ZS 85N, ZS 85 NS, ZS 85 NS-SW, ZS 135 and ZS 170 Price On Request! Machine stand for the types ZS 135 N and ZS 170 N Price On Request! Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left Page Scale and stop slide (for types ZS 85 N to ZS 170 N) Price On Request! 3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N) Price On Request! Cross ruler to cut acute angles (not type ZS 85) Price On Request! Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °, from mid 90 ° (only type ZS 170 N) Price On Request! Holding device for angular aperture in Rolladenbau (only types ZS 135 to ZS 200 N) Price On Request! Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting height 215 mm for the Rolladenbau Price On Request! Digital angle display for horizontal angle adjustment Price On Request! Digital angle indicator for horizontal and vertical angle adjustment (only in conjunction with machine on both sides tiltable) Price On Request! Laser device, laser beam with about 300 mm line length Price On Request! Hydropneumatic feed unit with two-hand safety control (only for the application range of aluminum machining) Price On Request! Motorized miter for horizontal and vertical angle adjustment with target / actual display Price On Request! Motorized miter for horizontal angle adjustment with Target / actual display Price On Request! Motorized miter for vertical angle adjustment with Target / actual display Price On Request! Chip bag with zipper for emptying (Machine type) Price On Request! Suction mobile 2.5 mtr. Hose, 400 V (in the commercial sector Wood dust is not allowed) Price On Request! Suction mobile 2.5 mtr. Hose, 400 V system with clean air Approval "H2" Price On Request! Automatic switch for machine with suction system Price On Request! Special cutting lengths up to approx 600 mm on request Blades: --------------------- HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg Price On Request! HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ neg (short service life) Price On Request! HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg Price On Request! HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg Price On Request! HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg Price On Request! HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg Price On Request! HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg Price On Request! HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg Price On Request! HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg Price On Request! techn. Details according to manufacturer - ohn guarantee! All genes mentioned here prices are excl. Of VAT currently valid. (Inland)
            cutting width 420 mm
            Cutting height ja mm
            Motor output 2 kW
            Cutting height at 45° 115 mm
            Dimensions (L/W/H) 1100x700x800 mm
            machine weight ab. 150 kg
            Description :
            # 5052 Graule cutting and miter saw ZS 170 N, new
            --------------------------------------------------
            ------------------------------
            -----------------

            - Crosscut and miter saw with a maximum cutting height of 170 mm
            - Cast iron construction
            - Precise ball bearing guide of the tool carrier on hardened and
            grinded steel shafts
            - Manual feed
            - Rapid miter setting up to 65 ° horizontally and 45 ° vertically (up
            60 ° ZS 200N)
            - Re-adjustable positive stops
            - Lower blade guard can be connected to suction

            Technical Specifications:
            ---------------------------------

            - Motor: 400 V / 2.0 kW
            - Speed: 3500 U / min
            - Cutting length: 430 mm (at 90 °)
            - Cutting height: 170 mm (at 90 °)
            - Miter horiz .: 45 ° -90 ° -25 °
            - Miter verti .: 90 ° -45 ° (left)
            - Saw blade Ø 420 mm
            - Suction 100 mm
            - 120 kg


            Accessories for Crosscut and miter saws
            --------------------------------------------------
            ------------------------------
            -------
            All Crosscut and miter saws are the basic equipment without
            Sawblade

            Hydraulic feed brake (for type ZS 85 N to ZS 170 N)
            Price On Request!

            Hydraulic feed brake (for type ZS 200 and ZS 200 N)
            Price On Request!

            Pneumatic Sägeblattsprüheinrichtung
            Price On Request!

            Pneumatic material clamping left side for types ZS 85
            Price On Request!

            Pneumatic material clamping on both sides of the top for the types ZS 135 to ZS
            200 N
            Price On Request!

            Pneumatic maintenance unit, consisting of water,
            Pressure reducing valve with pressure gauge and lubricator
            Price On Request!

            Pressure reducing valve with pressure gauge
            Price On Request!

            Remodeling the crosscut saw type ZS 85 for electrical installation on type ZS
            85 E,
            suitable inclined to cut cable ducts Cutting Capacity at 45 °: 72 mm
            x 380 mm
            Price On Request!

            Pole-changing motor 400 volts, n = 1350/2750 rev / min for type ZS 85 E, for
            Cutting of thin-walled sheet steel channels
            Price On Request!

            Machine stand for the types ZS 85N, ZS 85 NS, ZS 85 NS-SW, ZS 135 and ZS
            170
            Price On Request!

            Machine stand for the types ZS 135 N and ZS 170 N
            Price On Request!

            Portable machine substructure with 1.5 mtr. Roller conveyors on each side, left
            Page
            Scale and stop slide (for types ZS 85 N to ZS 170 N)
            Price On Request!

            3 kW three-phase brake motor 380-400 volts (only types ZS 135 ZS to 170 N)
            Price On Request!

            Cross ruler to cut acute angles (not type ZS 85)
            Price On Request!

            Machine via handwheel on both sides tiltable, left to 45 ° right up to 60 °,
            from mid 90 ° (only type ZS 170 N)
            Price On Request!

            Holding device for angular aperture in Rolladenbau (only types ZS 135 to ZS
            200 N)
            Price On Request!

            Remodeling the crosscut saw type ZS 200 Saw blade diameter 550 mm, cutting
            height
            215 mm for the Rolladenbau
            Price On Request!

            Digital angle display for horizontal angle adjustment
            Price On Request!

            Digital angle indicator for horizontal and vertical angle adjustment (only
            in conjunction with machine on both sides tiltable)
            Price On Request!

            Laser device, laser beam with about 300 mm line length
            Price On Request!

            Hydropneumatic feed unit with two-hand safety control (only for
            the application range of aluminum machining)
            Price On Request!

            Motorized miter for horizontal and vertical angle adjustment
            with target / actual display
            Price On Request!

            Motorized miter for horizontal angle adjustment with
            Target / actual display
            Price On Request!

            Motorized miter for vertical angle adjustment with
            Target / actual display
            Price On Request!

            Chip bag with zipper for emptying (Machine type)
            Price On Request!

            Suction mobile 2.5 mtr. Hose, 400 V (in the commercial sector
            Wood dust is not allowed)
            Price On Request!

            Suction mobile 2.5 mtr. Hose, 400 V system with clean air
            Approval "H2"
            Price On Request!

            Automatic switch for machine with suction system
            Price On Request!

            Special cutting lengths up to approx 600 mm on request


            Blades:
            ---------------------
            HM circular saw blade for wood 300 x 3,2 x 40 mm 72 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 300 x 3,3 x 40 mm 96 FTZ neg
            Price On Request!

            HM circular saw blade for thin-walled steel profiles 305 x 2,2 x 40 mm 80 FTZ
            neg (short service life)
            Price On Request!

            HM circular saw blade for wood 350 x 4,0 x 40 mm 42 WZ neg
            Price On Request!

            HM circular saw blade for wood 350 x 3,2 x 40 mm 72 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 350 x 3.5 x 40 mm 108 FTZ neg
            Price On Request!

            HM circular saw blade for wood 420 x 4,0 x 40 mm 48 WZ neg
            Price On Request!

            HM circular saw blade for wood 420x3,5x40 mm 84 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 420 x 3.8 x 40 mm 108 FTZ neg
            Price On Request!

            HM circular saw blade for wood 520 x 4,4 x 50 mm 60 WZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 520 x 4.4 x 50 mm 120 FTZ neg
            Price On Request!

            HM circular saw blade for aluminum and plastics 550 x 4,0 x 50 mm 180 FTZ neg
            Price On Request!

            techn. Details according to manufacturer - ohn guarantee!
            All genes mentioned here prices are excl. Of VAT currently valid.
            (Inland)


        • Engelfried Maschinentechnik GmbH
        • Elisabethenstr. 41
        • 73432 Aalen
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Mitre saw HBM 305 x 108


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-85121 · Mitre saw

          HBM - 305 x 108 - - -

          Technical details
          saw-blade dia. 305 mm︱Cutting height 105 x 340 mm︱Cutting height at 45° 60 x 340 mm︱saw blade turning speeds 5000 U/min︱Motor output 2,0 kW︱machine weight ab. 25 kg︱Dimensions (L/W/H) 700 x 570 x 980 mm︱
          Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports
            saw-blade dia. 305 mm
            Cutting height 105 x 340 mm
            Cutting height at 45° 60 x 340 mm
            saw blade turning speeds 5000 U/min
            Motor output 2,0 kW
            machine weight ab. 25 kg
            Dimensions (L/W/H) 700 x 570 x 980 mm
            Description :
            Cross-cut saw
            The machine is equipped with many adjustment options and tools to support and
            secure the workpiece to be cut.
            A line laser indicates where the cut should be made.
            The protective cover folds away automatically.
            Delivery including:
            saw blade (installed)
            6mm allen key
            anthers
            2x side supports


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          used Saws Mitre saw HBM 215 x 70


          • WMT GmbH & Co.KG
          • Siemensstraße 1
          • 46342 Velen-Ramsdorf
          • Deutschland

          • +49 2863 92477-47
            +49 2863 92477-50
          • info@w-m-t.de
            www.w-m-t.de
          #1108-85120 · Mitre saw

          HBM - 215 x 70 - - -

          Technical details
          saw-blade dia. 210 mm︱Cutting height 70 x 305 mm︱Cutting height at 45° 35 x 305 mm︱saw blade turning speeds 4500 U/min︱Motor output 1,5 kW︱machine weight ab. 9 kg︱Dimensions (L/W/H) 340 x 500 x 740 mm︱
          Cross-cut saw The machine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser indicates where the cut should be made. The protective cover folds away automatically. Delivery including: saw blade (installed) 6mm allen key anthers 2x side supports
            saw-blade dia. 210 mm
            Cutting height 70 x 305 mm
            Cutting height at 45° 35 x 305 mm
            saw blade turning speeds 4500 U/min
            Motor output 1,5 kW
            machine weight ab. 9 kg
            Dimensions (L/W/H) 340 x 500 x 740 mm
            Description :
            Cross-cut saw
            The machine is equipped with many adjustment options and tools to support and
            secure the workpiece to be cut.
            A line laser indicates where the cut should be made.
            The protective cover folds away automatically.
            Delivery including:
            saw blade (installed)
            6mm allen key
            anthers
            2x side supports


        • WMT GmbH & Co.KG
        • Siemensstraße 1
        • 46342 Velen-Ramsdorf
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer: