European network of stockholding machinery dealers
+49 (0) 2389 5299080
Inquiry

Category:
    Manufacturer:
      Machines:
        Trader:
             View: 

              Search: 



          Showoffers:
          Build year From:
          1950
          Build year To:
          2021

          Walter Kames GmbH - Stockist for used machines

          Machinelist:

          Center Lathe

          used Center Lathe LEINEN LB

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10009 · Center Lathe

          LEINEN - LB - - 1975 -

          Technical details
          turning diameter over bed 130 mm︱turning diameter over slide rest 100 mm︱turning length 420 mm︱total power requirement 1 kW︱weight of the machine ca. 0,5 t︱dimensions of the machine ca. 1,4 x 0,9 x 1,2 m︱
          - push out collet - tailstock - 3-jaw chuck - MULTIFIX toolholder with various holders
            turning diameter over bed 130 mm
            turning diameter over slide rest 100 mm
            turning length 420 mm
            total power requirement 1 kW
            weight of the machine ca. 0,5 t
            dimensions of the machine ca. 1,4 x 0,9 x 1,2 m
            Description :
            - push out collet
            - tailstock
            - 3-jaw chuck
            - MULTIFIX toolholder with various holders

          Datasheet
          Request / Contact

          CNC Lathe

          used CNC Lathe MAX MUELLER MD 7 it-4A

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10031 · CNC Lathe

          MAX MUELLER - MD 7 it-4A - - 1996 - EPL II

          Technical details
          turning diameter 650 mm︱turning length 760 mm︱control EPL II ︱swing diameter over slide rest 420 mm︱workpiece weight 500 kg︱longitudinal stroke 1025/625 mm︱face stroke 325/202 ︱spindle motor 38 kW︱spindle turning speed range 10 - 2800 U/min︱spindle bore 101 mm︱spindle diameter in front bearing 160 mm︱spindle head A11 ︱total power requirement 65 kW︱weight of the machine ca. 11,6 t︱dimensions of the machine ca. 4,9 x 2,3 x 2,5 m︱
          Machine equiped with EPL II CNC control for 4 axis - power chuck 400 mm diameter - 2 turret heads with each 12 tools - chip conveyor, coolant device and oil mist exhauster
            turning diameter 650 mm
            turning length 760 mm
            control EPL II
            swing diameter over slide rest 420 mm
            workpiece weight 500 kg
            longitudinal stroke 1025/625 mm
            face stroke 325/202
            spindle motor 38 kW
            spindle turning speed range 10 - 2800 U/min
            spindle bore 101 mm
            spindle diameter in front bearin. 160 mm
            spindle head A11
            total power requirement 65 kW
            weight of the machine ca. 11,6 t
            dimensions of the machine ca. 4,9 x 2,3 x 2,5 m
            Description :
            Machine equiped with EPL II CNC control for 4 axis

            - power chuck 400 mm diameter
            - 2 turret heads with each 12 tools
            - chip conveyor, coolant device and oil mist exhauster

          Datasheet
          Request / Contact
          used CNC Lathe GILDEMEISTER NEF 560

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10030 · CNC Lathe

          GILDEMEISTER - NEF 560 - - 1984 - EPL 1

          Technical details
          turning diameter 560 mm︱turning length 1000 mm︱control EPL 1 ︱spindle turning speed range 10 - 2240 U/min︱spindle motor 15 kW︱turning diameter over bed slide 250 ︱bed width 360 mm︱cross movement 310 mm︱spindle bore 65 mm︱rapid traverse feeds 6000 mm/min︱total power requirement 22 kW︱weight of the machine ca. 3 t︱dimensions of the machine ca. 4,5 x 2,5 x 1,8 m︱
          - power chuck 315 mm - steady rest - PARAT tool carrier with various inserts - coolant device - misc. accessories
            turning diameter 560 mm
            turning length 1000 mm
            control EPL 1
            spindle turning speed range 10 - 2240 U/min
            spindle motor 15 kW
            turning diameter over bed slide 250
            bed width 360 mm
            cross movement 310 mm
            spindle bore 65 mm
            rapid traverse feeds 6000 mm/min
            total power requirement 22 kW
            weight of the machine ca. 3 t
            dimensions of the machine ca. 4,5 x 2,5 x 1,8 m
            Description :
            - power chuck 315 mm
            - steady rest
            - PARAT tool carrier with various inserts
            - coolant device
            - misc. accessories
          Datasheet
          Request / Contact
          used CNC Lathe INDEX GFG 100

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09753 · CNC Lathe

          INDEX - GFG 100 - - 1981/1999 - SIEMENS 810D

          Technical details
          turning diameter 600 mm︱turning length 500 mm︱control SIEMENS 810D ︱spindle diameter in front bearing 160 mm︱turning speed range - spindle 25 - 1450 U/min︱spindle motor 37 kW︱number of tapers in turret head 16 ︱rapid power traverse in X-and Z direction 10 m/min︱powered chuck diameter 315 mm︱spindle bore 100 mm︱tool holder -shaft diameter 50 mm︱total power requirement 60 kVA︱weight of the machine ca. 6,8 t︱dimensions of the machine ca. 4,7 x 2,5 x 2,7 m︱
          Machine retrofit in 1999 with SIEMENS 810 D control and new drive controler, feed motors ans swichting cabinet. - chip conveyor - 400 mm 3-jaw power chuck
            turning diameter 600 mm
            turning length 500 mm
            control SIEMENS 810D
            spindle diameter in front bearin. 160 mm
            turning speed range - spindle 25 - 1450 U/min
            spindle motor 37 kW
            number of tapers in turret head 16
            rapid power traverse in X-and Z . 10 m/min
            powered chuck diameter 315 mm
            spindle bore 100 mm
            tool holder -shaft diameter 50 mm
            total power requirement 60 kVA
            weight of the machine ca. 6,8 t
            dimensions of the machine ca. 4,7 x 2,5 x 2,7 m
            Description :
            Machine retrofit in 1999 with SIEMENS 810 D control and new drive controler,
            feed motors ans swichting cabinet.
            - chip conveyor
            - 400 mm 3-jaw power chuck
          Datasheet
          Request / Contact
          used CNC Lathe MAX MUELLER MDW 20

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09960 · CNC Lathe

          MAX MUELLER - MDW 20 - - 1970/2001 - SIEMENS 840D

          Technical details
          turning diameter 800 mm︱turning length 630 mm︱control SIEMENS 840D ︱swing diameter over slide rest 410 mm︱z-axis 630 mm︱x-axis 500 mm︱spindle head 11 ︱spindle diameter in front bearing 130 mm︱spindle bore 73 mm︱spindle motor 37 kW︱spindle turning speed range 10 - 1000 U/min︱max. torque on the spindle 3700 Nm︱total power requirement 78 kW︱weight of the machine ca. 10 t︱dimensions of the machine ca. 6,5 x 3,5 x 2,8 m︱
          - Machine general overhould and retrofit with SIEMENS 840 D control in 2002 - power chuck 600 mm FORKHARDT - 12-fold drum type tool magazine - chip conveyor and coolant device - various tolholders
            turning diameter 800 mm
            turning length 630 mm
            control SIEMENS 840D
            swing diameter over slide rest 410 mm
            z-axis 630 mm
            x-axis 500 mm
            spindle head 11
            spindle diameter in front bearin. 130 mm
            spindle bore 73 mm
            spindle motor 37 kW
            spindle turning speed range 10 - 1000 U/min
            max. torque on the spindle 3700 Nm
            total power requirement 78 kW
            weight of the machine ca. 10 t
            dimensions of the machine ca. 6,5 x 3,5 x 2,8 m
            Description :
            - Machine general overhould and retrofit with SIEMENS 840 D control in 2002
            - power chuck 600 mm FORKHARDT
            - 12-fold drum type tool magazine
            - chip conveyor and coolant device
            - various tolholders
          Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Vertical Turret Lathe - Single Column WEBSTER BENNETT 36

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-08269 · Vertical Turret Lathe - Single Column

          WEBSTER BENNETT - 36 - - 1975/89 - SIEMENS 820T

          Technical details
          faceplate diameter 914 mm︱swing diameter 1166 mm︱turning height 942 mm︱distance between table and cross rail 673 mm︱table load 8 t︱ram head - cross travel 640 mm︱faceplate turning speed range 11 - 466 U/min︱transmission ratio 4 ︱rapid traverse 5000 mm/min︱feeds infinitely variable 0 - 400 mm/min︱voltage 380 V︱main drive DC 42 kW︱control SIEMENS 820T ︱total power requirement 65 KVA︱weight of the machine ca. 9,5 t︱dimensions of the machine ca. 2,3 x 2,4 x 3,8 m︱
          - in 1989 Machine overhould and retrofitted with SIEMENS 820 T for 2 axis, new switching cabinet, new power control units, new main drive. - 5-fold revolving head - ball screws for X+Z axis - hydr. power chuck - hydr. gear speed regulation
            faceplate diameter 914 mm
            swing diameter 1166 mm
            turning height 942 mm
            distance between table and cross. 673 mm
            table load 8 t
            ram head - cross travel 640 mm
            faceplate turning speed range 11 - 466 U/min
            transmission ratio 4
            rapid traverse 5000 mm/min
            feeds infinitely variable 0 - 400 mm/min
            voltage 380 V
            main drive DC 42 kW
            control SIEMENS 820T
            total power requirement 65 KVA
            weight of the machine ca. 9,5 t
            dimensions of the machine ca. 2,3 x 2,4 x 3,8 m
            Description :
            - in 1989 Machine overhould and retrofitted with SIEMENS 820 T for
            2 axis, new switching cabinet, new power control units,
            new main drive.
            - 5-fold revolving head
            - ball screws for X+Z axis
            - hydr. power chuck
            - hydr. gear speed regulation


          Datasheet
          Request / Contact

          Floor Type Boring and Milling M/C - Hor.

          used Floor Type Boring and Milling M/C - Hor. WOTAN RAPID 2 K

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09772 · Floor Type Boring and Milling M/C - Hor.

          WOTAN - RAPID 2 K - - 1983/2000 - HEIDENHAIN TNC426

          Technical details
          spindle diameter 140 mm︱x-travel 7500 mm︱y-travel 2500 mm︱z-axis 800 mm︱w-axis 600 mm︱V-axis 1500 mm︱spindle taper ISO 50 ︱spindle turning speed range 4 - 1600 U/min︱rapid traverse feeds 10000 mm/min︱spindle drive motor 57 kW︱control HEIDENHAIN TNC426 ︱total power requirement 75 kW︱weight of the machine ca. 39 t︱dimensions of the machine ca. 11,5 x 3,5 x 6,05 m︱coolant ︱
          - retrofit in 2000 with new HEIDNEHAIN TNC 426 control for 6 axis. - changer for 2 angular milling heads - tool changer for 60 tools - NC boring table FRORIEP, 1800 x 2000 mm, 16 to - RENISHAW measuring device with tracer head - chip conveyor - coolant through spindle
            spindle diameter 140 mm
            x-travel 7500 mm
            y-travel 2500 mm
            z-axis 800 mm
            w-axis 600 mm
            V-axis 1500 mm
            spindle taper ISO 50
            spindle turning speed range 4 - 1600 U/min
            rapid traverse feeds 10000 mm/min
            spindle drive motor 57 kW
            control HEIDENHAIN TNC426
            total power requirement 75 kW
            weight of the machine ca. 39 t
            dimensions of the machine ca. 11,5 x 3,5 x 6,05 m
            Description :
            - retrofit in 2000 with new HEIDNEHAIN TNC 426 control for 6 axis.
            - changer for 2 angular milling heads
            - tool changer for 60 tools
            - NC boring table FRORIEP, 1800 x 2000 mm, 16 to
            - RENISHAW measuring device with tracer head
            - chip conveyor
            - coolant through spindle


          Datasheet
          Request / Contact

          Machining Center - Vertical

          used Machining Center - Vertical NORTE VS 500 Speed

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09449 · Machining Center - Vertical

          NORTE - VS 500 Speed - - 1997/2005 - SIEMENS 840D

          Technical details
          x-travel 2000 mm︱y-travel 500 mm︱z-travel 600 mm︱table-size 2120 x 550 mm︱table load capacity 2000 kp︱feed 1 - 8000 mm/min︱rapid traverse X-axis 40 m/min︱rapid traverse Z-axis 20 m/min︱tool taper HSK 63 A ︱spindle turning speed - stepless 0 - 16000 U/min︱spindle motor 20 kW︱spindle diameter in front bearing 70 mm︱control SIEMENS 840D ︱tool diameter 63 / 126 mm︱toolpiece magazine: chain magazine 40 Stück︱tool length - max. 250 mm︱weight of tools max. 8 kg︱total power requirement 55 kVA︱weight of the machine ca. 12 t︱dimensions of the machine ca. 5,33 x 3,1 x 3,1 m︱
          - digital drive and control components SIEMENS 840 D - motor-spindle - 1,3 second spindle accelaration to 16000 rpm - pendulum machining - coolant plant for 70 bar - internal coolant supply - table with hydraulic workpiece clamping (T-sloted table retrofitable) - exhauster, chip convejor, levelling elements
            x-travel 2000 mm
            y-travel 500 mm
            z-travel 600 mm
            table-size 2120 x 550 mm
            table load capacity 2000 kp
            feed 1 - 8000 mm/min
            rapid traverse X-axis 40 m/min
            rapid traverse Z-axis 20 m/min
            tool taper HSK 63 A
            spindle turning speed - stepless 0 - 16000 U/min
            spindle motor 20 kW
            spindle diameter in front bearin. 70 mm
            control SIEMENS 840D
            tool diameter 63 / 126 mm
            toolpiece magazine: chain magazi. 40 Stück
            tool length - max. 250 mm
            weight of tools max. 8 kg
            total power requirement 55 kVA
            weight of the machine ca. 12 t
            dimensions of the machine ca. 5,33 x 3,1 x 3,1 m
            Description :
            - digital drive and control components SIEMENS 840 D
            - motor-spindle - 1,3 second spindle accelaration to 16000 rpm
            - pendulum machining
            - coolant plant for 70 bar
            - internal coolant supply
            - table with hydraulic workpiece clamping (T-sloted table retrofitable)
            - exhauster, chip convejor, levelling elements
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used Pillar Drilling Machine ERFI REKORD

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-00442 · Pillar Drilling Machine

          ERFI REKORD - - - 1972 -

          Technical details
          bore capacity in steel (diameter) 20 mm︱throat 300 mm︱bore stroke 80 mm︱spindle turning speed range 116 - 3650 U/min︱total power requirement 1,2 kW︱weight of the machine ca. 0,3 t︱dimensions of the machine ca. 0,5 x 0,4 x 2,1 m︱
            bore capacity in steel (diameter. 20 mm
            throat 300 mm
            bore stroke 80 mm
            spindle turning speed range 116 - 3650 U/min
            total power requirement 1,2 kW
            weight of the machine ca. 0,3 t
            dimensions of the machine ca. 0,5 x 0,4 x 2,1 m
          Datasheet
          Request / Contact

          Portal - Machining Center

          used Portal - Machining Center AXA UPFZ 50

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-30675 · Portal - Machining Center

          AXA - UPFZ 50 - - 2011 - SIEMENS 840 D

          Technical details
          Control SIEMENS 840 D ︱x-axis 6000 mm︱y-axis Y1= 4600 / Y2= 3400 mm︱z-axis Z1 / Z2 = 1000 mm︱rotary table diameter 4000 mm︱circular table speeds 60 U/min︱table load 50 t︱max. torque on the faceplate 46000 ︱spindle turning speed - stepless 30-7500 U/min︱column: max. dist. table - spindle nose 1800 mm︱distance between columns 4300 mm︱table width 2500 mm︱table length 4200 mm︱total power requirement 125 kW︱weight of the machine ca. 112 t︱dimensions of the machine ca. 14,4 x 10 x 5,5 m︱
          5 axis portal machining center incl following accessories: Ø 4000mm DEMMELER turning table with 50 to capacity and RÖHM magnetic chuck. RAM for turning process CAPTO C6 axes (Y2) toolcanger for 11 tools milling spindel with 28 kW, 2 axis head, 30-7500 rpm , SK 50 (axes Y1) with 60 tools for the milling spindle stationary pick up holder for 5 large tools new milling spindle in 2018
            Control SIEMENS 840 D
            x-axis 6000 mm
            y-axis Y1= 4600 / Y2= 3400 mm
            z-axis Z1 / Z2 = 1000 mm
            rotary table diameter 4000 mm
            circular table speeds 60 U/min
            table load 50 t
            max. torque on the faceplate 46000
            spindle turning speed - stepless 30-7500 U/min
            column: max. dist. table - spind. 1800 mm
            distance between columns 4300 mm
            table width 2500 mm
            table length 4200 mm
            total power requirement 125 kW
            weight of the machine ca. 112 t
            dimensions of the machine ca. 14,4 x 10 x 5,5 m
            Description :
            5 axis portal machining center incl following accessories:
            Ø 4000mm DEMMELER turning table with 50 to capacity and RÖHM
            magnetic chuck.
            RAM for turning process CAPTO C6 axes (Y2)
            toolcanger for 11 tools
            milling spindel with 28 kW, 2 axis head, 30-7500 rpm , SK 50 (axes Y1)
            with 60 tools for the milling spindle
            stationary pick up holder for 5 large tools
            new milling spindle in 2018
          Datasheet
          Request / Contact

          Ram-Type Floor Boring and Milling M/C

          used Ram-Type Floor Boring and Milling M/C WOTAN Rapid 4 P

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09717 · Ram-Type Floor Boring and Milling M/C

          WOTAN - Rapid 4 P - - 1992 -

          Technical details
          spindle diameter 140 mm︱x-travel 5000 mm︱y-travel 3000 mm︱spindle stroke 700 mm︱ram: horizontal adjustment 500 mm︱dimension of the ram 310 x 310 mm︱spindle taper ISO 50 ︱spindle turning speed range 2 - 2000 U/min︱feed 5000 mm/min︱rapid traverse 10 m/min︱spindle motor 40 kW︱semi-automatic operated SIEMENS 850 ︱total power requirement 100 kW︱weight of the machine ca. 42 t︱dimensions of the machine ca. 9,5 x 3,8 x 5,95 m︱
          - control SIEMENS 850 CNC - floor plate approx. 5 x 2 m - aero-static guideways - hydrostatic spindlebearings - device for coolant through spindle - HEIDENHAIN scales - leveling elements, hand-held pendant, misc. arbors and spare parts
            spindle diameter 140 mm
            x-travel 5000 mm
            y-travel 3000 mm
            spindle stroke 700 mm
            ram: horizontal adjustment 500 mm
            dimension of the ram 310 x 310 mm
            spindle taper ISO 50
            spindle turning speed range 2 - 2000 U/min
            feed 5000 mm/min
            rapid traverse 10 m/min
            spindle motor 40 kW
            semi-automatic operated SIEMENS 850
            total power requirement 100 kW
            weight of the machine ca. 42 t
            dimensions of the machine ca. 9,5 x 3,8 x 5,95 m
            Description :
            - control SIEMENS 850 CNC
            - floor plate approx. 5 x 2 m
            - aero-static guideways
            - hydrostatic spindlebearings
            - device for coolant through spindle
            - HEIDENHAIN scales
            - leveling elements, hand-held pendant, misc. arbors and spare parts

          Datasheet
          Request / Contact
          used Ram-Type Floor Boring and Milling M/C SCHIESS FB 32/20

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09739 · Ram-Type Floor Boring and Milling M/C

          SCHIESS - FB 32/20 - - 1961/1997 -

          Technical details
          spindle diameter 200 mm︱x-travel 6000 mm︱y-travel 3000 mm︱ram diameter 550 mm︱max. boring depth in one step 1600 mm︱feeding 900 mm︱Boring depth max. 2500 mm︱bed width 2400 mm︱spindle motor 73 kW︱spindle turning speed range 1,15 - 625 U/min︱feeds 2 - 2000 mm/min︱max. diameter of flange turning 2400 mm︱spindle taper ISO 50 ︱total power requirement 100 kW︱weight of the machine ca. 135 t︱dimensions of the machine ca. m︱
          - digital readout for 3-axis RSF, model 735 - angular milling head 90° - partly overhouled in 1997 - spare parts consisting off: main and feed motor, AC-DC converter, gears.
            spindle diameter 200 mm
            x-travel 6000 mm
            y-travel 3000 mm
            ram diameter 550 mm
            max. boring depth in one step 1600 mm
            feeding 900 mm
            Boring depth max. 2500 mm
            bed width 2400 mm
            spindle motor 73 kW
            spindle turning speed range 1,15 - 625 U/min
            feeds 2 - 2000 mm/min
            max. diameter of flange turning 2400 mm
            spindle taper ISO 50
            total power requirement 100 kW
            weight of the machine ca. 135 t
            Description :
            - digital readout for 3-axis RSF, model 735
            - angular milling head 90°
            - partly overhouled in 1997
            - spare parts consisting off: main and feed motor, AC-DC converter, gears.


          Datasheet
          Request / Contact

          Double Column Milling M/C - Gantry Type

          used Double Column Milling M/C - Gantry Type INGERSOLL

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09556 · Double Column Milling M/C - Gantry Type

          INGERSOLL - - - 1975/1995 - SIEMENS 840C

          Technical details
          x-travel 16500 mm︱y-travel 6000 mm︱z-travel 600 mm︱w-axis 2915 mm︱surface area 16460 x 4875 mm︱table load 200 t︱distance between columns 5590 mm︱distance table - lower edge spindle 45 - 3580 mm︱spindle diameter 152 mm︱spindle motor 30 kW︱spindle taper ISO 50 ︱spindle turning speed range 25 - 600 U/min︱feed in x - axis 6,3 m/min︱feed in y - axis 3 m/min︱control SIEMENS 840C ︱total power requirement kW︱weight of the machine ca. 300 t︱dimensions of the machine ca. 30 x 10 x 9 m︱
          - 1995 retrofitted with CNC control SIEMENS 840 C - universal milling heads - 2 milling heads on crossrail with ram-section 420 x 420 mm - crossrail movement by ac motor and with hydr. clamping - measuring system for x- and y-axis via rack/shaft - column movement by double rack/pinion - floor plate
            x-travel 16500 mm
            y-travel 6000 mm
            z-travel 600 mm
            w-axis 2915 mm
            surface area 16460 x 4875 mm
            table load 200 t
            distance between columns 5590 mm
            distance table - lower edge spin. 45 - 3580 mm
            spindle diameter 152 mm
            spindle motor 30 kW
            spindle taper ISO 50
            spindle turning speed range 25 - 600 U/min
            feed in x - axis 6,3 m/min
            feed in y - axis 3 m/min
            control SIEMENS 840C
            weight of the machine ca. 300 t
            dimensions of the machine ca. 30 x 10 x 9 m
            Description :
            - 1995 retrofitted with CNC control SIEMENS 840 C
            - universal milling heads
            - 2 milling heads on crossrail with ram-section 420 x 420 mm
            - crossrail movement by ac motor and with hydr. clamping
            - measuring system for x- and y-axis via rack/shaft
            - column movement by double rack/pinion
            - floor plate


          Datasheet
          Request / Contact

          Planer-Type Milling M/C - Double Column

          used Planer-Type Milling M/C - Double Column WALDRICH COBURG 17-10 FP 225

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09949 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - 17-10 FP 225 - - 85/2003 - SIEMENS 840D

          Technical details
          x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱spindle motor 55 kW︱spindle turning speed range 5 - 2000 U/min︱spindle taper ISO 60 ︱spindle diameter in front bearing 170 mm︱table lenght 1 + 2 6400 mm︱table width 2250 mm︱daylight between the side columns 2650 mm︱table load 50 t︱no. of tools in the magazine 60 Stück︱distance spindle nose and table 2500 mm︱control SIEMENS 840D ︱feed range - table 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed in w - axe 10 - 2000 mm/min︱total power requirement 85 kW︱weight of the machine ca. 125 t︱
          Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90° indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device
            x-travel 6600 mm
            y-travel 3200 mm
            z-travel 1000 mm
            w-axis 1750 mm
            spindle motor 55 kW
            spindle turning speed range 5 - 2000 U/min
            spindle taper ISO 60
            spindle diameter in front bearin. 170 mm
            table lenght 1 + 2 6400 mm
            table width 2250 mm
            daylight between the side column. 2650 mm
            table load 50 t
            no. of tools in the magazine 60 Stück
            distance spindle nose and table 2500 mm
            control SIEMENS 840D
            feed range - table 10 - 15000 mm/min
            feeds crossrail-slide horizontal 10 - 10000 mm/min
            feed in w - axe 10 - 2000 mm/min
            total power requirement 85 kW
            weight of the machine ca. 125 t
            Description :
            Machine general overhauled and equipped with SIEMENS 840 D control in 2003

            - new digital motors, drive controllers, measuring systems and switch cabinet
            - tool changer for 60 tools (45 ISO 50, 15 ISO 60)
            - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90°
            indexing
            - hydrostatic table guideways
            - adjustable crossrail
            - 2 tables coupled
            - chip conveyor
            - coolant device
          Datasheet
          Request / Contact
          used Planer-Type Milling M/C - Double Column INGERSOLL 108 x 120 x 56FT

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09557 · Planer-Type Milling M/C - Double Column

          INGERSOLL - 108 x 120 x 56FT - - 1972/2001 -

          Technical details
          x-travel 17900 mm︱y-travel 2900 mm︱z-travel 2900 mm︱clamping surface table 1 10400 x 2540 mm︱clamping surface table 2 6000 x 2540 mm︱clamping surface table 1+2 , coupled 17000 x 2540 mm︱distance table - lower edge spindle 3048 mm︱column daylight 2945 mm︱spindle motor 2 x 86/70 kW︱table load 80 t︱diameter of quill 305 mm︱quill stroke 380 mm︱spindle taper metric 100 ︱total power requirement 370 kW︱weight of the machine ca. 260 t︱dimensions of the machine ca. 36,6 x 10,5 x 8,1 m︱
          - electrics modernized in 2001 (incl. new drive controllers) - 2 milling heads on crossrail - 2 side milling heads - crossrail with vertical adjustment - angular milling heads - x-axis drive by worm and worm-rack system
            x-travel 17900 mm
            y-travel 2900 mm
            z-travel 2900 mm
            clamping surface table 1 10400 x 2540 mm
            clamping surface table 2 6000 x 2540 mm
            clamping surface table 1+2 , cou. 17000 x 2540 mm
            distance table - lower edge spin. 3048 mm
            column daylight 2945 mm
            spindle motor 2 x 86/70 kW
            table load 80 t
            diameter of quill 305 mm
            quill stroke 380 mm
            spindle taper metric 100
            total power requirement 370 kW
            weight of the machine ca. 260 t
            dimensions of the machine ca. 36,6 x 10,5 x 8,1 m
            Description :
            - electrics modernized in 2001 (incl. new drive controllers)
            - 2 milling heads on crossrail
            - 2 side milling heads
            - crossrail with vertical adjustment
            - angular milling heads
            - x-axis drive by worm and worm-rack system

          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used Tool Room Milling Machine - Universal DECKEL FP 3 NC

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10025 · Tool Room Milling Machine - Universal

          DECKEL - FP 3 NC - - 1982 - DIALOG 4

          Technical details
          x-travel 400 mm︱y-travel 400 mm︱z-travel 400 mm︱table-size 700 x 460 mm︱spindle turning speed range 40 - 5000 U/min︱rapid traverse 2 - 4000 mm/min︱spindle taper ISO 40 ︱spindle motor 5,5 kW︱quill stroke 80 mm︱control DIALOG 4 ︱total power requirement 15 kW︱weight of the machine ca. 2,3 t︱dimensions of the machine ca. 2,5 x 2,9 x 1,9 m︱
          - CNC control DIALOG 4 / Contour 3 for 3 axis - horizontal/vertical spindle - coolant device - vise
            x-travel 400 mm
            y-travel 400 mm
            z-travel 400 mm
            table-size 700 x 460 mm
            spindle turning speed range 40 - 5000 U/min
            rapid traverse 2 - 4000 mm/min
            spindle taper ISO 40
            spindle motor 5,5 kW
            quill stroke 80 mm
            control DIALOG 4
            total power requirement 15 kW
            weight of the machine ca. 2,3 t
            dimensions of the machine ca. 2,5 x 2,9 x 1,9 m
            Description :
            - CNC control DIALOG 4 / Contour 3 for 3 axis
            - horizontal/vertical spindle
            - coolant device
            - vise

          Datasheet
          Request / Contact

          Bevel Gear Lapping Machine

          used Bevel Gear Lapping Machine OERLIKON L50

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-30532 · Bevel Gear Lapping Machine

          OERLIKON - L50 - - 2000 - FANUC 16 M

          Technical details
          max. wheel diameter 500 mm︱gear width 350 mm︱max. module ︱min. module ︱Control FANUC 16 M ︱turning speed range - stepless 0-3000 U/min︱total power requirement 29 kW︱weight of the machine ca. 7,5 t︱dimensions of the machine ca. m︱
            max. wheel diameter 500 mm
            gear width 350 mm
            Control FANUC 16 M
            turning speed range - stepless 0-3000 U/min
            total power requirement 29 kW
            weight of the machine ca. 7,5 t
          Datasheet
          Request / Contact

          Cold Rolling Machine

          used Cold Rolling Machine GROB ZRM 12 NC-DR-A890

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09847 · Cold Rolling Machine

          GROB - ZRM 12 NC-DR-A890 - - 2004 - SIEMENS 840D

          Technical details
          root circle diameter 79 - 230 mm︱centre height 1215 mm︱roll head turning speed range 1400 U/min︱x-axis 2 x 95 mm︱feed speeds infinitely variable 0 - 18000 mm/min︱rapid speed 18000 mm/min︱workpiece spindle stepless 500 U/min︱required air pressure 6 bar︱control SIEMENS 840D ︱total connected load 71 kW︱Dimensions (L x W x H) 10 x 4,5 x 3,4 mm︱Total weight, approx. 16 to︱
          Machine designed for operations on thin wall hollow parts with external/internal gears, internal gears, cluth disc carrier and gear rims. - CNC control SIEMENS 840D - installed axis X, Z, B, C, U, V - automatic workpiece handling (pallet conveyor, gantry loader FLEXOMAT) - oil processing plant (cleaning, cooling, lubrication) - manual control device - soundproofing cabin - documentation complete available - distance main spindle and rolling-spindle center (z-axis) 450 - 1250 mm - swing dia. of rolling spindles 205 mm - useable rolling spindle adjustment 95 mm per side - max. speed of workpiece spindle dep. on jigger - 500 rpm - feed for z-axis - 0 -18000 mm/min. - piston stroke of tailstock 430 mm
            root circle diameter 79 - 230 mm
            centre height 1215 mm
            roll head turning speed range 1400 U/min
            x-axis 2 x 95 mm
            feed speeds infinitely variable 0 - 18000 mm/min
            rapid speed 18000 mm/min
            workpiece spindle stepless 500 U/min
            required air pressure 6 bar
            control SIEMENS 840D
            total connected load 71 kW
            Dimensions (L x W x H) 10 x 4,5 x 3,4 mm
            Total weight, approx. 16 to
            Description :
            Machine designed for operations on thin wall hollow parts with
            external/internal gears, internal gears, cluth disc carrier and gear rims.

            - CNC control SIEMENS 840D
            - installed axis X, Z, B, C, U, V
            - automatic workpiece handling (pallet conveyor, gantry loader FLEXOMAT)
            - oil processing plant (cleaning, cooling, lubrication)
            - manual control device
            - soundproofing cabin
            - documentation complete available
            - distance main spindle and rolling-spindle center (z-axis) 450 - 1250 mm
            - swing dia. of rolling spindles 205 mm
            - useable rolling spindle adjustment 95 mm per side
            - max. speed of workpiece spindle dep. on jigger - 500 rpm
            - feed for z-axis - 0 -18000 mm/min.
            - piston stroke of tailstock 430 mm


          Datasheet
          Request / Contact

          Gear Hobbing Machine - Vertical

          used Gear Hobbing Machine - Vertical LIEBHERR L 902

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09921 · Gear Hobbing Machine - Vertical

          LIEBHERR - L 902 - - 1979 -

          Technical details
          max. wheel diameter 900 mm︱gear width 600 mm︱max. module 10/12 ︱min. module ︱table diameter 710 mm︱table hole 160 mm︱dividing plate diameter 575 mm︱table load 4 t︱Chain motor 12 kw︱turning speed range 29 - 232 U/min︱spindle taper ISO 40 ︱milling head axial adjustable 200 mm︱distance table / middle of spindle 0 - 500 mm︱milling head -swivable +/- 45 °︱total power requirement 20 kW︱weight of the machine ca. 12 t︱dimensions of the machine ca. 4,5 x 2,1 x 3,1 m︱
          - steady rest - universal head with shifting - copy device for crowning - digital readout for radial adjustment - multi start indexing device - change gears - chip convejor and coolant device
            max. wheel diameter 900 mm
            gear width 600 mm
            max. module 10/12
            table diameter 710 mm
            table hole 160 mm
            dividing plate diameter 575 mm
            table load 4 t
            Chain motor 12 kw
            turning speed range 29 - 232 U/min
            spindle taper ISO 40
            milling head axial adjustable 200 mm
            distance table / middle of spind. 0 - 500 mm
            milling head -swivable +/- 45 °
            total power requirement 20 kW
            weight of the machine ca. 12 t
            dimensions of the machine ca. 4,5 x 2,1 x 3,1 m
            Description :

            - steady rest
            - universal head with shifting
            - copy device for crowning
            - digital readout for radial adjustment
            - multi start indexing device
            - change gears
            - chip convejor and coolant device
          Datasheet
          Request / Contact

          Cylindrical Grinding Machine

          used Cylindrical Grinding Machine KOPP SN 800

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10033 · Cylindrical Grinding Machine

          KOPP - SN 800 - - 1999 -

          Technical details
          grinding diameter 470 mm︱grinding length 800 mm︱centre height 225 mm︱workpiece length 650 mm︱swing diameter 450 mm︱number of spindles 1 ︱travel -x axis 470 mm︱travel -z axis 800 mm︱spindle motor 20 kW︱spindle turning speed range - 1500 U/min︱rapid traverse 15000 mm/min︱max. workpiece weight 50 kg︱grinding wheel diam. min/max. 380/750 ︱max. width of grinding wheel 40 mm︱b-axis 360.000 x 0,001 °︱total power requirement 30 kW︱weight of the machine ca. 11,5 t︱dimensions of the machine ca. m︱
          . machine with SIEMENS 840 C control for 3 axis - NC controled splash nozzles - DITTEL auto balancer - dressing device - coolant device with paper band filtration and complete splash housing
            grinding diameter 470 mm
            grinding length 800 mm
            centre height 225 mm
            workpiece length 650 mm
            swing diameter 450 mm
            number of spindles 1
            travel -x axis 470 mm
            travel -z axis 800 mm
            spindle motor 20 kW
            spindle turning speed range - 1500 U/min
            rapid traverse 15000 mm/min
            max. workpiece weight 50 kg
            grinding wheel diam. min/max. 380/750
            max. width of grinding wheel 40 mm
            b-axis 360.000 x 0,001 °
            total power requirement 30 kW
            weight of the machine ca. 11,5 t
            Description :
            . machine with SIEMENS 840 C control for 3 axis
            - NC controled splash nozzles
            - DITTEL auto balancer
            - dressing device
            - coolant device with paper band filtration and complete splash housing

          Datasheet
          Request / Contact

          Cylindrical Grinding Machine - Universal

          used Cylindrical Grinding Machine - Universal STUDER S140

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10047 · Cylindrical Grinding Machine - Universal

          STUDER - S140 - - 2002 - Siemens 840 D

          Technical details
          grinding diameter 120 mm︱grinding length 110 mm︱centre height 60 mm︱x-axis 300 mm︱internal diameter 100 mm︱grinding depth max 300 mm︱swing diameter 120 mm︱rapid traverse 15 m/min︱z-axis 300 mm︱solution in X-, Y- und Z-axis 0,0001 mm︱spindle turning speed range 0-1000 U/min︱tailstock taper MT 5 ︱control Siemens 840 D ︱grinding diameter max. 120 mm︱grinding wheel diameter 400 mm︱grinding wheel width 32 mm︱grinding wheel hole diameter 127 mm︱grinding wheel speeds 3150 U/min︱total power requirement 56 kW︱weight of the machine ca. 6,3 t︱
          two 120mm internal grinding spindels 60.000 and 90.000 rpm installed DIETTEL M5000 balancing dresser CO2 fire extinguishing cooling with oil granite machine bed OD grinding dia 120 mm OD grinding legth 100 mm simultanious ID - OD operation X2 = OD travel X1 = IDtravel
            grinding diameter 120 mm
            grinding length 110 mm
            centre height 60 mm
            x-axis 300 mm
            internal diameter 100 mm
            grinding depth max 300 mm
            swing diameter 120 mm
            rapid traverse 15 m/min
            z-axis 300 mm
            solution in X-, Y- und Z-axis 0,0001 mm
            spindle turning speed range 0-1000 U/min
            tailstock taper MT 5
            control Siemens 840 D
            grinding diameter max. 120 mm
            grinding wheel diameter 400 mm
            grinding wheel width 32 mm
            grinding wheel hole diameter 127 mm
            grinding wheel speeds 3150 U/min
            total power requirement 56 kW
            weight of the machine ca. 6,3 t
            Description :
            two 120mm internal grinding spindels 60.000 and 90.000 rpm installed
            DIETTEL M5000 balancing
            dresser
            CO2 fire extinguishing
            cooling with oil
            granite machine bed
            OD grinding dia 120 mm
            OD grinding legth 100 mm
            simultanious ID - OD operation
            X2 = OD travel
            X1 = IDtravel
          Datasheet
          Request / Contact

          Double Wheel Grinding Machine - horiz.

          used Double Wheel Grinding Machine - horiz. THIELENHAUS H 600 Twinstar

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09776 · Double Wheel Grinding Machine - horiz.

          THIELENHAUS - H 600 Twinstar - - 2000 - SIEMENS 840D

          Technical details
          grinding dia max continuous grinding 80 ︱grinding dia rotary grinding 80 ︱grinding dia min rotary grinding ︱grinding dia min continuous grinding ︱grinding wheel diameter 600 mm︱grinding wheel speed 45 m/sec︱workpiece width - max. 80 mm︱max. workpiece diameter 65 mm︱grinding spindle drive 2 x 21 kW︱spindle stroke 190 mm︱spindle turning speed range 300 - 1100 U/min︱control SIEMENS 840D ︱total power requirement 50 kW︱weight of the machine ca. 9 t︱dimensions of the machine ca. m︱
          - CNC control SIEMENS 840D - grinding spindles with direct drive - maintenance-free spindle bearings - NC controlled workpiece transport disc for continous and dis-continous workpiece-transport in infeed, thorughfeed or combined process - workpiece separation - measuring system
            grinding dia max continuous grin. 80
            grinding dia rotary grinding 80
            grinding wheel diameter 600 mm
            grinding wheel speed 45 m/sec
            workpiece width - max. 80 mm
            max. workpiece diameter 65 mm
            grinding spindle drive 2 x 21 kW
            spindle stroke 190 mm
            spindle turning speed range 300 - 1100 U/min
            control SIEMENS 840D
            total power requirement 50 kW
            weight of the machine ca. 9 t
            Description :
            - CNC control SIEMENS 840D
            - grinding spindles with direct drive
            - maintenance-free spindle bearings
            - NC controlled workpiece transport disc for continous and dis-continous
            workpiece-transport in infeed, thorughfeed or combined process
            - workpiece separation
            - measuring system
          Datasheet
          Request / Contact

          Internal Grinding Machine

          used Internal Grinding Machine STUDER S140

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-10045 · Internal Grinding Machine

          STUDER - S140 - - 2002 - Siemens 840 D

          Technical details
          internal diameter 100 mm︱grinding depth 100 mm︱swing diameter 120 mm︱x-axis 300 mm︱rapid traverse 15 m/min︱z-axis 300 mm︱solution in X-, Y- und Z-axis 0,0001 mm︱spindle turning speed range 0-1000 U/min︱tailstock taper MT 5 ︱control Siemens 840 D ︱total power requirement 56 kW︱weight of the machine ca. 6,3 t︱dimensions of the machine ca. 3,8 x 2,6 x 2,2 m︱
          two 120mm grinding spindels installed 90.000 rpm and 45.000 rpm DIETTEL M5000 balancing dresser CO2 fire extinguishing cooling with oil granite machine bed
            internal diameter 100 mm
            grinding depth 100 mm
            swing diameter 120 mm
            x-axis 300 mm
            rapid traverse 15 m/min
            z-axis 300 mm
            solution in X-, Y- und Z-axis 0,0001 mm
            spindle turning speed range 0-1000 U/min
            tailstock taper MT 5
            control Siemens 840 D
            total power requirement 56 kW
            weight of the machine ca. 6,3 t
            dimensions of the machine ca. 3,8 x 2,6 x 2,2 m
            Description :
            two 120mm grinding spindels installed 90.000 rpm and 45.000 rpm
            DIETTEL M5000 balancing
            dresser
            CO2 fire extinguishing
            cooling with oil
            granite machine bed
          Datasheet
          Request / Contact

          Roll Grinder

          used Roll Grinder HERKULES UWS 450

          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland
          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09981 · Roll Grinder

          HERKULES - UWS 450 - - 1967/1986 -

          Technical details
          grinding diameter 950 mm︱grinding length 6500 mm︱swing diameter 1000 mm︱workpiece weight 18 t︱grinding wheel peripheral speeds: 36 m/s︱longitudinal feeds, infinitely variable 200 - 2800 mm/min︱grinding wheel speeds 415 - 830 U/min︱grinding wheel size 750 x 70 x 305 mm︱grinding motor 20 kW︱workpiece turning speeds 6,7 - 60 U/min︱creep feed 20 mm/min︱total power requirement 65 kW︱weight of the machine ca. 45 t︱dimensions of the machine ca. 13 x 4,5 x 2,1 m︱
          1986 retrofit with stepless feed drives - concave and convex grinding device - ball grinding device - 2 steadies anti friction - coolant device with paperband filtration - taper grinding max. 750 mm
            grinding diameter 950 mm
            grinding length 6500 mm
            swing diameter 1000 mm
            workpiece weight 18 t
            grinding wheel peripheral speeds. 36 m/s
            longitudinal feeds, infinitely v. 200 - 2800 mm/min
            grinding wheel speeds 415 - 830 U/min
            grinding wheel size 750 x 70 x 305 mm
            grinding motor 20 kW
            workpiece turning speeds 6,7 - 60 U/min
            creep feed 20 mm/min
            total power requirement 65 kW
            weight of the machine ca. 45 t
            dimensions of the machine ca. 13 x 4,5 x 2,1 m
            Description :
            1986 retrofit with stepless feed drives
            - concave and convex grinding device
            - ball grinding device
            - 2 steadies anti friction
            - coolant device with paperband filtration
            - taper grinding max. 750 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   
            •

            Trader Profile:   Walter Kames GmbH

          Contact Trader



            Walter Kames GmbH
           Dillenburger Weg 34
            40229 Düsseldorf
            Deutschland
            +49 211 215066 0">+49 211 215066 0
            +49 211 215067
            info@kames.de
            www.kames.de

          Profile of Trader

          The company Walter Kames
          is known worldwide for the trade with high-quality secondhand machinetools.

          The company is buying and selling individual machines, production lines and complete factory inventory for the metalcutting and metalforming industry.
          On an area of more than 10000 sqm with crane capacity upto 70 tons customers from all over the world are finding one of the biggest warehouses for used machines in Europe. From the simple lathe to the biggest CNC plano milling machine we are able to demonstrate the majority of our machines to the interested customer under power. The modification, overhauling and control retrofits are part of the services offered.

          Latest communication means and access to specific online records enable our highly qualified team of employees to react flexible and quickly to the requirements of our customers. Only in the year 2005 we have supplied different machinetools with a total weight of more than 3500 tons to customers in 25 countries on all continents.


          A look at the history:

          1922 .......... Company Kames was founded by Josef Kames.
          1957 .......... Walter Kames takes over ownership and management.
          1985 .......... The company was renamed WALTER KAMES LTD.
          2010 .......... Mr. Alexander Kames gets appointed as managing director.

          Walter Kames GmbH
          Dillenburger Weg 34
          40229 Düsseldorf

          Tel.: 0211-215066-0
          Fax: 0211-215067
          eMail: info@kames.de

          Geschäftsführer: Alexander Kames



          Walter Kames GmbH 40229 Düsseldorf Dillenburger Weg 34 Deutschland
          Walter Kames GmbH

          Dillenburger Weg 34



          Contact Trader


            Walter Kames GmbH
           Dillenburger Weg 34
            40229 Düsseldorf
            Deutschland
            +49 211 215066 0
            +49 211 215067
            info@kames.de
            www.kames.de
            Contact person:
          Herrn Thomas Nieting +49 211 215066 12
          Herrn Alexander Kames +49 211 215066 13
           

          Trader Profile



          Machine category


          Aufspannplatte · Aufspanntisch · Aufspannwinkel · Bearbeitungszentrum - Horizontal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Blechrundbiegemaschine - 3 Walzen · Bohrwürfeltisch · Breitband-Schleifmaschine · CNC Dreh- und Fräszentrum · CNC Drehmaschine · Doppel-Fahrständer-Bearbeitungszentrum · Doppelscheibenschleifmaschine - horiz. · Dreh-,Schwenk-, und Kipptisch · Drehmaschine - zyklengesteuert · Einstellgerät · Ersatzteile · Fahrständerfräsmaschine · Fixatoren · Flachschleifmaschine · Fräsmaschine - Universal · Fräsmaschine - Vertikal · Futter · Führungsbahnschleifmaschine · Handhebelpresse · Hochfrequenzspindel · Hydraulische Presse · Innenschleifmaschine · Kaltwalzmaschine · Karusselldreh- und Schleifma.-Doppelst. · Karusselldrehmaschine - Doppelständer · Karusselldrehmaschine - Einständer · Kegelrad - Läppmaschine · Kettenzug - von Hand · Kreisteiltisch · Leit- und Zugspindeldrehmaschine · LuZ · Messerköpfe · Meß- und Anreißanlage · Mischer und Kneter · Plattenbohrwerk - Horizontal · Portal - Bearbeitungszentrum · Portalfräsmaschine · Portalfräsmaschine verfahrbar · Radialbohrmaschine · Rundschleifmaschine · Rundschleifmaschine - Außen · Rundschleifmaschine - Universal · Rundtisch · Schutzgasschweißanlage · Schweißtisch · Schweißtransformator · Schwerdrehbank · Schwerdrehmaschine · Spiralkegelradschneidmaschine · Spitzendrehbank · Spitzenlose - Rundschleifmaschine · Stangenautomat - Einspindel · Stangenzuführung · Stanzautomat - Doppelständer · Säulenbohrmaschine · Tischbohrwerk · Traghülsenplattenbohrwerk · Transformator · Vertikal - Bandsäge · Vertikaldrehmaschine · Vierwalzen - Blechbiegemaschine · Walzenschleifmaschine · Werkzeugfräsmaschine - Universal · Werkzeugschrank · Winkelkopf · Würfeltisch - schwenkbar · Wälzfräserschärfmaschine · Zahnflankenschleifmaschine · Zahnrad-Abwälzfräsmaschine - vertikal · Zubehör ·
          Compendium
          Software
          Used machines content
          Privacy
          Follow us
          ©2000 - 2021, Logotech oHG · Software- and Internet Services - All rights reserved