European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Lathes

          Machinelist: Lathes


          Center Lathe

          used Lathes Center Lathe STANKO 1 K 62


          • Feyen Maschinen GmbH
          • Gelleperstr. 10
          • 47809 Krefeld
          • Deutschland

          • 0049 (0)2151/5267-0
            0049 (0)2151/5267-39
          • info@feyen.de
            www.feyen.de
          #1053-001642 · Center Lathe

          STANKO - 1 K 62 - - 1972 -

          Technical details
          Dreh-Øüber Bett 400 mm︱Dreh-Øüber Support 220 mm︱turning length 1000 mm︱spindle turning speed range 12,5 - 2000 U/min︱spindle taper Bajonett 55022 ︱spindle bore 47 mm︱feeds - longitudinal 0,07 - 4,16 mm/U︱feeds - cross 0.035 - 2,08 mm/U︱thread - mm pitch 0,87 - 192 mm︱thread - inch 2 - 24 Gang/ inch.︱rapid travel - longitudinal/face 3,4 / 1,7 m/min︱spindle drive 11 kW︱power capacity 13 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 2,8 x 1,2 x 1,5 m︱
          • 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992,
            Dreh-Øüber Bett 400 mm
            Dreh-Øüber Support 220 mm
            turning length 1000 mm
            spindle turning speed range 12,5 - 2000 U/min
            spindle taper Bajonett 55022
            spindle bore 47 mm
            feeds - longitudinal 0,07 - 4,16 mm/U
            feeds - cross 0.035 - 2,08 mm/U
            thread - mm pitch 0,87 - 192 mm
            thread - inch 2 - 24 Gang/ inch.
            rapid travel - longitudinal/face 3,4 / 1,7 m/min
            spindle drive 11 kW
            power capacity 13 kW
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 2,8 x 1,2 x 1,5 m
            Description :
            • 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm,
            • 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992,


        • Feyen Maschinen GmbH
        • Gelleperstr. 10
        • 47809 Krefeld
        • Deutschland

        • Datasheet
          Request / Contact

          lathe-conventional-electronic

          used Lathes lathe-conventional-electronic Stanko PT2506


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D376 · lathe-conventional-electronic

          Stanko - PT2506 - - -

          Technical details
          Distance between centers 5000 mm︱Centre height 350 mm︱Swing over bed 700 mm ø︱Swing over support 400 mm ø︱Spindle boring 72 mm ø︱2x steady 350 mm ø︱3-Jaw chuck 315 mm ø︱
          2-axis digital readout
            Distance between centers 5000 mm
            Centre height 350 mm
            Swing over bed 700 mm ø
            Swing over support 400 mm ø
            Spindle boring 72 mm ø
            2x steady 350 mm ø
            3-Jaw chuck 315 mm ø
            Description :
            2-axis digital readout


        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes lathe-conventional-electronic Stanko


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D757 · lathe-conventional-electronic

          Stanko - - - -

          Technical details
          Distance between centers 5000 mm︱Centre height 315 mm︱Swing over bed 630 mm ø︱Swing over support 510 mm ø︱Spindle boring 110 mm ø︱Steady rest 390 & 510 mm ø︱3-Jaw chuck 400 mm ø︱Revolutions 10 - 1250 RPM︱Machine dimensions (lxwxh) 6400 x 1800 x 1600 mm︱
            Distance between centers 5000 mm
            Centre height 315 mm
            Swing over bed 630 mm ø
            Swing over support 510 mm ø
            Spindle boring 110 mm ø
            Steady rest 390 & 510 mm ø
            3-Jaw chuck 400 mm ø
            Revolutions 10 - 1250 RPM
            Machine dimensions (lxwxh) 6400 x 1800 x 1600 mm
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Vertical Turret Lathe - Single Column

          used Lathes Vertical Turret Lathe - Single Column STANKO 1525 / 2008


          • Markus Hirsch GmbH
          • Hüttenstrasse 1
          • 46284 Dorsten
          • Deutschland

          • +49 2362 95035 12
            +49 2362 95035 10
          • liersch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03640 · Vertical Turret Lathe - Single Column

          STANKO - 1525 / 2008 - - 1987 - Siemens

          Technical details
          faceplate diameter 2200 mm︱swing diameter 2500 mm︱turning height 1600 mm︱Control Siemens ︱chip conveyor ︱total power requirement 100 kW︱weight of the machine ca. 35 t︱dimensions of the machine ca. m︱
          vertical lathe with two RAM; faceplate Ø 2000 mm; SPS supported control for storable cycles; RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling; Chip conveyor / spindle Z-axis as new / without KSS Filter unit / 3 glass scales are missing / control panel is disconnected but complete and OK; a 90 degree angle is missing from the control panel arm
            faceplate diameter 2200 mm
            swing diameter 2500 mm
            turning height 1600 mm
            Control Siemens
            total power requirement 100 kW
            weight of the machine ca. 35 t
            Description :
            vertical lathe with two RAM; faceplate Ø 2000 mm; SPS supported
            control for storable cycles; RAM/channel 1 two Capto recordings C8 with
            Internal tool cooling, RAM/channel 2, two Capto mounts C8 with
            internal tool cooling; Chip conveyor / spindle Z-axis as new / without KSS
            Filter unit / 3 glass scales are missing / control panel is disconnected but complete and
            OK; a 90 degree angle is missing from the control panel arm


        • Markus Hirsch GmbH
        • Hüttenstrasse 1
        • 46284 Dorsten
        • Deutschland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column Stanko 1512


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-D489 · Vertical Turret Lathe - Single Column

          Stanko - 1512 - - 1977 -

          Technical details
          Jawplate diameter 1130 mm ø︱Maximum turning diameter 1500 mm ø︱3-jaw chuck 1130
            Jawplate diameter 1130 mm ø
            Maximum turning diameter 1500 mm ø
            3-jaw chuck 1130
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column STANKO 1512


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)653235637
          • info@intermach.nl
            www.intermach.nl
          #2050-D489 · Vertical Turret Lathe - Single Column

          STANKO - 1512 - - 1977 -

          Technical details
          faceplate diameter 1130 mm︱swing diameter 1500 mm︱turning height 1100 mm︱faceplate diameter mm︱swing diameter mm︱total power requirement 30 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW
            faceplate diameter 1130 mm
            swing diameter 1500 mm
            turning height 1100 mm
            total power requirement 30 kW
            Description :
            Brand: STANKO
            TYPEL 1512
            Build in: 1977
            with pneumatick 3-jaw stuck 1130 mm
            max. turning diameter 1500 mm
            max. turning height 1100 mm
            Motor 30 KW


        • Intermach BV
        • lange voor 71
        • 8316BC Marknesse
        • Niederlande

        • Datasheet
          Request / Contact
          used Lathes Vertical Turret Lathe - Single Column STANKO 1541


          • Harry Vraets Machinery B.V.
          • Gezellenstraat 2
          • 3861RD Nijkerk
          • Niederlande

          • +31 (0)332452145
          • info@vraetsmachinery.com
            www.vraetsmachinery.com
          #2039-12672D · Vertical Turret Lathe - Single Column

          STANKO - 1541 - - -

          Technical details
          faceplate diameter 1400 mm︱swing diameter 1600 mm︱turning height 1200 mm︱turning speed range - milling 4 - 200 (18x) U/min︱side head - cross travel 600 mm︱turret head - cross travel 800 mm︱total power requirement 55 kW︱weight of the machine ca. ︱dimensions of the machine ca. m︱
          6 positions turret head
            faceplate diameter 1400 mm
            swing diameter 1600 mm
            turning height 1200 mm
            turning speed range - milling 4 - 200 (18x) U/min
            side head - cross travel 600 mm
            turret head - cross travel 800 mm
            total power requirement 55 kW
            Description :
            6 positions turret head



        • Harry Vraets Machinery B.V.
        • Gezellenstraat 2
        • 3861RD Nijkerk
        • Niederlande

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •