European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Schmeisser Werkzeugmaschinen - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe COLCHESTER Triumph VS 2500


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04433 · Center Lathe

          COLCHESTER - Triumph VS 2500 - - 2019 -

          Technical details
          turning diameter over bed 400 mm︱turning diameter over slide rest 246 mm︱turning length 1200 mm︱centre height 195 mm︱spindle head D 1 - 6 Camlock ︱spindle bore 54 mm︱turning speed range 14 - 2500 U/min︱feeds - longitudinal 0,04-1,2 mm/U︱feeds - cross 0,02-0,5 mm/U︱metrical thread cutting 0,2-14 mm︱voltage 400 V / 50 Hz ︱engine output 7,5 kW︱total power requirement 10 kW︱weight of the machine ca. 1800 kg︱dimensions of the machine ca. 1 x 2 x 2 m︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. *** New machine with 12 months warranty immediately available from stock *** *** We have the Cholchester & Harrison representative new to the program *** - with offset and removable bridge induction hardened and precision ground bed guideways - Hardened and precision ground gears in the headstock - 3-jaw plan spiral manual chuck 250 mm as well as a set of turning and    drill jaws - Multifix quick-change steel holder size B completely assembled - 3-axis digital display Acu-Rite (Heidenhein) with V-constant function - Single stop for longitudinal pull - LED machine light - Chip protection on the bed sled - Complete set of vibration damping actuators - complete coolant device - locked safety spindle protection The machine is also available with manual gearbox (without V-Konstand). If you are interested in other lathes, please contact us.
            turning diameter over bed 400 mm
            turning diameter over slide rest 246 mm
            turning length 1200 mm
            centre height 195 mm
            spindle head D 1 - 6 Camlock
            spindle bore 54 mm
            turning speed range 14 - 2500 U/min
            feeds - longitudinal 0,04-1,2 mm/U
            feeds - cross 0,02-0,5 mm/U
            metrical thread cutting 0,2-14 mm
            voltage 400 V / 50 Hz
            engine output 7,5 kW
            total power requirement 10 kW
            weight of the machine ca. 1800 kg
            dimensions of the machine ca. 1 x 2 x 2 m
            Description :


            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            *** New machine with 12 months warranty immediately available from stock ***
            *** We have the Cholchester & Harrison representative new to the program ***

            - with offset and removable bridge
            induction hardened and precision ground bed guideways
            - Hardened and precision ground gears in the headstock
            - 3-jaw plan spiral manual chuck 250 mm as well as a set of turning and
               drill jaws
            - Multifix quick-change steel holder size B completely assembled
            - 3-axis digital display Acu-Rite (Heidenhein) with V-constant function
            - Single stop for longitudinal pull
            - LED machine light
            - Chip protection on the bed sled
            - Complete set of vibration damping actuators
            - complete coolant device
            - locked safety spindle protection

            The machine is also available with manual gearbox (without V-Konstand).
            If you are interested in other lathes, please contact us.
          Datasheet
          Request / Contact
          used  Center Lathe WEILER Praktikant 160


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04593 · Center Lathe

          WEILER - Praktikant 160 - - 1993 -

          Technical details
          turning diameter over bed 320 mm︱turning diameter over slide rest 175 mm︱turning length 650 mm︱turning speed range 96 - 2500 U/min︱feeds - longitudinal 0,02 - 0,63 mm/U︱feeds - cross 0,32 x Längsvorschub mm/U︱3-jaw-chuck diameter max.165 mm︱centre height 160 mm︱spindle bore 40 mm︱spindle head 55027 / 5 ︱Motor power 2,4/ 3 kw︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 931603368 380 V - 50 Hz, color: new paint (2K paint) white / light gray "Compliance with the Machinery Directive" + Engine brake + Integrated spindle protection in the emergency stop chain, electrically protected + new spindle protection + Chip back wall + Lead and spindle cover + Emergency stop switch latching twice * Main switch fused + Change gear box with limit switch queried + Tailstock protection + Control cabinet safe to touch + Mandatory and prohibition signs according to the Machinery Directive Equipment : * New digital display on request from e.g. Heidenhein, RSF, Fagor * Single stop * Multifix holder size. A. * 2 inserts * Center point running new * Center point firmly new * Drill chucks 1-13 or 3-16 new * 3 jaw lathe chuck 160 mm * New coolant system on request * Machine shoes * Chip back wall new * Central lubrication * Major maintenance carried out, scraper set, belt set, various new parts, oils changed * Turning test on 150mm flying 0.015 Operating instructions, spare parts list, circuit diagram and key are included. The machine is workshop-tested and is delivered with an electrical test report!
            turning diameter over bed 320 mm
            turning diameter over slide rest 175 mm
            turning length 650 mm
            turning speed range 96 - 2500 U/min
            feeds - longitudinal 0,02 - 0,63 mm/U
            feeds - cross 0,32 x Längsvorschub mm/U
            3-jaw-chuck diameter max.165 mm
            centre height 160 mm
            spindle bore 40 mm
            spindle head 55027 / 5
            Motor power 2,4/ 3 kw
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            931603368

            380 V - 50 Hz, color: new paint (2K paint) white / light gray

            "Compliance with the Machinery Directive"

            + Engine brake
            + Integrated spindle protection in the emergency stop chain, electrically
            protected
            + new spindle protection
            + Chip back wall
            + Lead and spindle cover
            + Emergency stop switch latching twice
            * Main switch fused
            + Change gear box with limit switch queried
            + Tailstock protection
            + Control cabinet safe to touch
            + Mandatory and prohibition signs according to the Machinery Directive

            Equipment :

            * New digital display on request from e.g. Heidenhein, RSF, Fagor
            * Single stop
            * Multifix holder size. A.
            * 2 inserts
            * Center point running new
            * Center point firmly new
            * Drill chucks 1-13 or 3-16 new
            * 3 jaw lathe chuck 160 mm
            * New coolant system on request
            * Machine shoes
            * Chip back wall new
            * Central lubrication
            * Major maintenance carried out, scraper set, belt set, various new parts, oils
            changed
            * Turning test on 150mm flying 0.015

            Operating instructions, spare parts list, circuit diagram and key are included.
            The machine is workshop-tested and is delivered with an electrical test report!
          Datasheet
          Request / Contact

          Lathe - cycle-controlled

          used  Lathe -  cycle-controlled KERN-DMT CD 282 x 500


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04634 · Lathe - cycle-controlled

          KERN-DMT - CD 282 x 500 - - 2005 - Heidenhain 4110

          Technical details
          turning diameter 280 mm︱turning length 500 mm︱control Heidenhain 4110︱centre distance 500 mm︱greates pass round over bed 280 mm︱swing diameter over slide rest 140 mm︱spindle bore 45 mm︱drive capacity - spindle motor 11,5 kW︱turning speeds 1-5000 U/min︱rapid traverse X-axis 13 m/min︱rapid traverse Z-axis 7 m/min︱tailstock quill 50 mm︱quill stroke 120 mm︱taper MK 3 Mk︱spindle head 55027 Gr. 5 ︱weight 1,6 t︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          # 23C1.04 * Color: light gray RAL 7035 / brilliant blue RAL 5007 * Control Heidenhain Manual-Plus 4110 * Control panel can be moved to the left and right * Switch-on hours counter 9600 h * Sauter disc turret 8-fold * Main spindle in C-axis design * 4 powered stations * 22 VDI 20 holders * 2 driven tools * Röhm DURO S three-jaw wedge bar chuck: Ø 160 mm * Quick chuck facility * 9 collets * 4-way parat holder * 4 inserts * Hollow spindle stop * revolving center point new * solid center point * Tailstock roller guided for easier movement * 2 NC precision drill chucks * Reducing sleeves * Machine light * 6 machine shoes * Central lubrication pump * Chip tray * Coolant facility * Operation manual * Operating manual * Electric wiring diagram Machine is currently being checked in the workshop with an electrical one Acceptance protocol, turning test and declaration of conformity delivered! The pictures are from our archive of a sold machine, as soon as it comes out of the workshop we will insert original pictures.
            turning diameter 280 mm
            turning length 500 mm
            control Heidenhain 4110
            centre distance 500 mm
            greates pass round over bed 280 mm
            swing diameter over slide rest 140 mm
            spindle bore 45 mm
            drive capacity - spindle motor 11,5 kW
            turning speeds 1-5000 U/min
            rapid traverse X-axis 13 m/min
            rapid traverse Z-axis 7 m/min
            tailstock quill 50 mm
            quill stroke 120 mm
            taper MK 3 Mk
            spindle head 55027 Gr. 5
            weight 1,6 t
            Description :
            # 23C1.04

            * Color: light gray RAL 7035 / brilliant blue RAL 5007

            * Control Heidenhain Manual-Plus 4110
            * Control panel can be moved to the left and right
            * Switch-on hours counter 9600 h
            * Sauter disc turret 8-fold
            * Main spindle in C-axis design
            * 4 powered stations
            * 22 VDI 20 holders
            * 2 driven tools
            * Röhm DURO S three-jaw wedge bar chuck: Ø 160 mm
            * Quick chuck facility
            * 9 collets
            * 4-way parat holder
            * 4 inserts
            * Hollow spindle stop
            * revolving center point new
            * solid center point
            * Tailstock roller guided for easier movement
            * 2 NC precision drill chucks
            * Reducing sleeves
            * Machine light
            * 6 machine shoes
            * Central lubrication pump
            * Chip tray
            * Coolant facility
            * Operation manual
            * Operating manual
            * Electric wiring diagram

            Machine is currently being checked in the workshop with an electrical one
            Acceptance protocol, turning test and declaration of conformity delivered!

            The pictures are from our archive of a sold machine,
            as soon as it comes out of the workshop we will insert original pictures.
          Datasheet
          Request / Contact

          Rapid Radial Drilling Machine

          used  Rapid Radial Drilling Machine DONAU DR 23


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04614 · Rapid Radial Drilling Machine

          DONAU - DR 23 - - 1972 -

          Technical details
          bore capacity in steel (diameter) 23 mm︱arm length 710 mm︱workpiece height max. 1500 / 500 mm︱spindle turning speed range 108 - 2400 U/min︱feed - independent 0,075, 0,015, 0,3 mm︱distance spindle middle to column middle 385/995 mm︱table-size 600 x 1200 mm︱spindle stroke - max. 135 mm︱bore spindles - Morse Taper 3 Mk︱spindle drive 1,1 / 1,8 kW︱total power requirement 3,8 kW︱weight of the machine ca. 1,4 t︱facility for thread cutting ︱motoric height adjustment ︱machine lamp ︱operating instruction ︱Mechanic: good ︱Optical condition: good ︱The machine can be viewed under current.
          2057-2 The machine is in top condition, the table is not bored Equipment: * Thread cutting device * automatic feed * Clamping grooves on the back and sides * Work table with 4 clamping grooves * Drill chuck with insert pin * Coolant device, * Operation manual * New parts installed: bellows, V-belt, lamp, oil change The machine is workshop-tested and is delivered with an electrical test report!
            bore capacity in steel (diameter. 23 mm
            arm length 710 mm
            workpiece height max. 1500 / 500 mm
            spindle turning speed range 108 - 2400 U/min
            feed - independent 0,075, 0,015, 0,3 mm
            distance spindle middle to colum. 385/995 mm
            table-size 600 x 1200 mm
            spindle stroke - max. 135 mm
            bore spindles - Morse Taper 3 Mk
            spindle drive 1,1 / 1,8 kW
            total power requirement 3,8 kW
            weight of the machine ca. 1,4 t
            Description :
            2057-2

            The machine is in top condition, the table is not bored

            Equipment:

            * Thread cutting device
            * automatic feed
            * Clamping grooves on the back and sides
            * Work table with 4 clamping grooves
            * Drill chuck with insert pin
            * Coolant device,
            * Operation manual
            * New parts installed: bellows, V-belt, lamp, oil change

            The machine is workshop-tested and is delivered with an electrical test report!
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical AWEA AF-650


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04397 · milling machining centers - vertical

          AWEA - AF-650 - - 2016 - HEIDENHAIN TNC 530 I

          Technical details
          x-travel 650 mm︱y-travel 510 mm︱z-travel 510 mm︱table surface area 750 X 510 mm︱control HEIDENHAIN TNC 530 I ︱spindle turning speed range 12000 U/min︱spindle drive 11 kW︱ 20 St.︱tool adaptor SK 40 ︱internal coolant system feed 20 bar ︱feed 15 m/min︱rapid traverse 48 m/min︱total power requirement 25 kW︱weight of the machine ca. 4.2 t︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 650-16001 Hire purchase - leasing ** We are happy to offer you a hire purchase if you have the appropriate creditworthiness. Installment for a term of 60 months approx. 1,350.00 EUR. *** Leasing also possible! Please contact us! - Control HEIDENHAIN I TNC 530 HSCI Machine complete with: - Control cabinet cooling with air conditioning unit - Flat screen 15 " - HEIDENHAIN measuring rulers x, y, z - HEIDENHAIN sealing air - HEIDENHAIN Handwheel HR-410 - 12,000 rpm / ISO 40 with direct drive 10/14 kW - Cooling unit - Internal coolant supply 20 bar (Grundfoss pump) with 2 grinding filters - Air cooling through the spindle - Water and air pistol - chip flushing - Chip conveyor (scratch tape) - oil skimmer - Random chain tool changer 24-fold - full housing - Side sliding doors on roller guide - 2 LED gasps - FS function - operating mode 3 (hardware and software) - M & H infrared probe IRP25.50-PP
            x-travel 650 mm
            y-travel 510 mm
            z-travel 510 mm
            table surface area 750 X 510 mm
            control HEIDENHAIN TNC 530 I
            spindle turning speed range 12000 U/min
            spindle drive 11 kW
            20 St.
            tool adaptor SK 40
            internal coolant system feed 20 bar
            feed 15 m/min
            rapid traverse 48 m/min
            total power requirement 25 kW
            weight of the machine ca. 4.2 t
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            650-16001

            Hire purchase - leasing

            ** We are happy to offer you a hire purchase if you have the appropriate
            creditworthiness.
            Installment for a term of 60 months approx. 1,350.00 EUR. ***

            Leasing also possible!

            Please contact us!

            - Control HEIDENHAIN I TNC 530 HSCI

            Machine complete with:
            - Control cabinet cooling with air conditioning unit
            - Flat screen 15 "
            - HEIDENHAIN measuring rulers x, y, z
            - HEIDENHAIN sealing air
            - HEIDENHAIN Handwheel HR-410
            - 12,000 rpm / ISO 40 with direct drive 10/14 kW
            - Cooling unit
            - Internal coolant supply 20 bar (Grundfoss pump) with 2 grinding filters
            - Air cooling through the spindle
            - Water and air pistol
            - chip flushing
            - Chip conveyor (scratch tape)
            - oil skimmer
            - Random chain tool changer 24-fold
            - full housing
            - Side sliding doors on roller guide
            - 2 LED gasps
            - FS function - operating mode 3 (hardware and software)
            - M & H infrared probe IRP25.50-PP
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal Mikron WF 72 C


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04472 · Tool Room Milling Machine - Universal

          Mikron - WF 72 C - - 1995 -

          Technical details
          x-travel 900 mm︱y-travel 630 mm︱z-travel 500 mm︱table-size 1200 x 600 mm︱spindle taper ISO 40 ︱turning speed range 20 - 6300 U/min︱feeds longditudinal/cross/vertical 2 - 4000 mm/min︱rapid motion -longitudinal/cross/vertical 10/10/8 m/min︱numbers of positions in the tool changer 22 ︱quill stroke 100 mm︱total power requirement 20 kW︱weight of the machine ca. 5,7 t︱dimensions of the machine ca. 4 x 3 x 2,4 m︱electronic hand wheel ︱cooling equipment
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. in condition from seller! 33.01 392 with CEE plug and cable 3-D trace control Heidenhain TNC 425 22 fold toll changer colour graphics vertical head with hydraulic tool clamping fix table
            x-travel 900 mm
            y-travel 630 mm
            z-travel 500 mm
            table-size 1200 x 600 mm
            spindle taper ISO 40
            turning speed range 20 - 6300 U/min
            feeds longditudinal/cross/vertic. 2 - 4000 mm/min
            rapid motion -longitudinal/cross. 10/10/8 m/min
            numbers of positions in the tool. 22
            quill stroke 100 mm
            total power requirement 20 kW
            weight of the machine ca. 5,7 t
            dimensions of the machine ca. 4 x 3 x 2,4 m
            Description :

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            in condition from seller!

            33.01 392
            with CEE plug and cable
            3-D trace control Heidenhain TNC 425
            22 fold toll changer
            colour graphics
            vertical head with hydraulic tool clamping
            fix table
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 3 NC


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04581 · Tool Room Milling Machine - Universal

          DECKEL - FP 3 NC - - 1985 -

          Technical details
          x-travel 400 mm︱y-travel 400 mm︱z-travel 400 mm︱turning speed range - stepless 6300 U/min︱spindle taper ISO Sk 40 ︱stroke of quill vertical 80 mm︱rapid traverse 6 m/min︱table surface area 460 x 700 mm︱power requirement 2,0 / 3,0 kW︱total power requirement 14,5 kW︱weight of the machine ca. 1,8 mit Schrank t︱
          Special price ...4.900,00 EUR ... 2803 2618 380 V, 50 Hz on mechanical side the machine is in top-condition, but on electrical side it does not work. Therefore it is for make or get everything out of. CNC-universal-Tool Room Miling Machine with dialog 4 control, angle table fix, toolbox, electrical hand wheel, coolant facility, central lubrication, halogen light, 2 bathtubes for shavings waste operating key, operating instruction, spare parts list
            x-travel 400 mm
            y-travel 400 mm
            z-travel 400 mm
            turning speed range - stepless 6300 U/min
            spindle taper ISO Sk 40
            stroke of quill vertical 80 mm
            rapid traverse 6 m/min
            table surface area 460 x 700 mm
            power requirement 2,0 / 3,0 kW
            total power requirement 14,5 kW
            weight of the machine ca. 1,8 mit Schrank t
            Description :
            Special price ...4.900,00 EUR ...
            2803 2618
            380 V, 50 Hz
            on mechanical side the machine is in top-condition, but on electrical side
            it does not work.
            Therefore it is for make or get everything out of.
            CNC-universal-Tool Room Miling Machine with dialog 4 control, angle table fix,
            toolbox, electrical hand wheel, coolant facility, central lubrication,
            halogen light, 2 bathtubes for shavings waste
            operating key, operating instruction, spare parts list

          Datasheet
          Request / Contact

          Drill Grinding Machine

          used  Drill Grinding Machine KLINGEL BSA 40 GA


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04431 · Drill Grinding Machine

          KLINGEL - BSA 40 GA - - 1992 -

          Technical details
          drill diameter 3 - 40 mm︱drilling length - mm︱lip angle 50 - 180 °︱toolpiece turning speed range 7-60 U/min︱grinding feed 0,4 - 4 mm/min︱cuttings 2-3 (4-6) ︱grinding wheel size 200x40x51 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,6 t︱Mechanic: good ︱Optical condition: good ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 2340 40 GA 380 V 50 Hz, color: green * GA sharpening device * Oscillating drive for even grinding wheel wear * automatic feed * Linking device * Coolant system, * 1 cone reducing sleeve 4: 3 + 2: 1 each * Operating key and instruction manual Maschione has been workshop tested and is delivered with an electrical test report
            drill diameter 3 - 40 mm
            drilling length - mm
            lip angle 50 - 180 °
            toolpiece turning speed range 7-60 U/min
            grinding feed 0,4 - 4 mm/min
            cuttings 2-3 (4-6)
            grinding wheel size 200x40x51 mm
            total power requirement 1,1 kW
            weight of the machine ca. 0,6 t
            Description :

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            2340 40 GA
            380 V 50 Hz, color: green

            * GA sharpening device
            * Oscillating drive for even grinding wheel wear
            * automatic feed
            * Linking device
            * Coolant system,
            * 1 cone reducing sleeve 4: 3 + 2: 1 each


            * Operating key and instruction manual

            Maschione has been workshop tested and is delivered with an electrical test
            report
          Datasheet
          Request / Contact

          Tool Grinder - Universal

          used  Tool Grinder - Universal DECKEL S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04596 · Tool Grinder - Universal

          DECKEL - S11 - - 2020 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱speeds of grinding spindle 2 - 10.000 U/min︱total power requirement 2,2 kW︱operating key and instruction ︱collets ︱Mechanic: very good ︱Optical condition: very good ︱Condition: general reconditioning ︱The machine can be viewed under current.
          New in 1997 / overhauled in 2020 1923 400 V, 50 Hz, with CEE plug and. electric wire * Machine and accessories completely overhauled Color: 2 K repainting Stand RAL 7005 mouse gray Structure and accessories RAL 7035 light gray motorized height adjustment, axial grinding spindle adjustment * Complete electrical conversion includes: > Fi circuit breaker > new three-phase drive > new brake motor > new frequency regulation > new touch-safe built-in electronics > EMC screw connections > EMC cables > new protective tubes > Emergency stop switch > new control panel * Machine stand and support plate ground Equipment: * Video measurement system with CCD camera and image processing software with a new measuring cross slide new RSF scales on the measuring cross slide and on the Machine axes vertical and cross (4 axes) including complete attachment and adjustment For further versions, see attached data sheet * LED machine light * Dividing head Sk 40 with dividing disk 24 R, optical attachment prepared * 1 set = 4 dividing discs 14R, 16R, 18R, 22 R (Other pitches available on request) * Tightening screw M 16 69871 * Setting gauge * Universal setting gauge * Tooth support complete * Twist and relief grinding device with rack housing * Handwheel facility * Dressing device * Dressing diamond f. dto. * motorized drive (cylindrical grinding device) * Vice swivels 3 levels * Complete dust extraction system (without vacuum cleaner) * Pliers sleeve with extraction nut * 1 set = 35 collets 1.0 - 18.0 mm by 0.5 mm stgd. S 20x2 * 10 direct collets Sk 40 6/8/10/12/14/16/18/20/22/25 mm * Attachment chuck 48 mm * dto 75 mm * dto 36 mm * dto 51 mm * put-on chuck for small borings * 2 protective hood * set of hanging device for transport * 5 adjusting screw * 2 un. LED machine light 220 V * 2 un. trapezoidal thread spindel for cross slide* * Tool cabinet with shelves * Operating key, operating instructions, spare parts list, circuit diagram * technical grinding instructions * Machine and accessories overhauled and with electrical acceptance report * Domestic 12 months warranty
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            speeds of grinding spindle 2 - 10.000 U/min
            total power requirement 2,2 kW
            Description :


            New in 1997 / overhauled in 2020

            1923

            400 V, 50 Hz, with CEE plug and. electric wire

            * Machine and accessories completely overhauled

            Color: 2 K repainting
            Stand RAL 7005 mouse gray
            Structure and accessories RAL 7035 light gray

            motorized height adjustment, axial grinding spindle adjustment

            * Complete electrical conversion includes:

            > Fi circuit breaker
            > new three-phase drive
            > new brake motor
            > new frequency regulation
            > new touch-safe built-in electronics
            > EMC screw connections
            > EMC cables
            > new protective tubes
            > Emergency stop switch
            > new control panel

            * Machine stand and support plate ground

            Equipment:

            * Video measurement system with CCD camera and image processing software
            with a new measuring cross slide
            new RSF scales on the measuring cross slide and on the
            Machine axes vertical and cross (4 axes)
            including complete attachment and adjustment
            For further versions, see attached data sheet

            * LED machine light
            * Dividing head Sk 40 with dividing disk 24 R, optical attachment prepared
            * 1 set = 4 dividing discs 14R, 16R, 18R, 22 R
            (Other pitches available on request)
            * Tightening screw M 16 69871
            * Setting gauge
            * Universal setting gauge
            * Tooth support complete
            * Twist and relief grinding device with rack housing
            * Handwheel facility
            * Dressing device
            * Dressing diamond f. dto.
            * motorized drive (cylindrical grinding device)
            * Vice swivels 3 levels
            * Complete dust extraction system (without vacuum cleaner)
            * Pliers sleeve with extraction nut
            * 1 set = 35 collets 1.0 - 18.0 mm by 0.5 mm stgd. S 20x2
            * 10 direct collets Sk 40 6/8/10/12/14/16/18/20/22/25 mm
            * Attachment chuck 48 mm
            * dto 75 mm
            * dto 36 mm
            * dto 51 mm
            * put-on chuck for small borings
            * 2 protective hood
            * set of hanging device for transport
            * 5 adjusting screw
            * 2 un. LED machine light 220 V
            * 2 un. trapezoidal thread spindel for cross slide*
            * Tool cabinet with shelves

            * Operating key, operating instructions, spare parts list, circuit diagram
            * technical grinding instructions
            * Machine and accessories overhauled and with electrical acceptance report

            * Domestic 12 months warranty
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04404 · Tool Grinder - Universal

          DECKEL - S11 - - 1989 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 10000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱weight of the machine ca. 0,6 t︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 1218 HS 400 V, 50 Hz, with CEE plug and cable Colour: light grey RAL 7035 Stand traffic grey RAL 7042 (new paint) axial grinding spindle adjustment Accessories: * Machine stand and carrier plate ground * Complete electrical conversion included: > new three-phase drive > new brake motor > new frequency controller > new built-in electrics touch-proof > Fi circuit breaker > EMC cables and screwed connections > new protective cables > new control panel > Emergency stop switch * Opto electronic measuring device with microscope, support arm, parking space, new Fagor digital readout and scales completely mounted and adjusted * dividing head Sk 40 with prisms and 24 R dividing disc * 1 graduated disc 14 + 22 R each * Twist and back-grinding device with rack and pinion housing * Setting gauge * Complete tooth support * pivoting support finger * LED lamp * Dust extraction device without vacuum cleaner * Univ. adjustment gauge * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm * Collet sleeve with forcing nut * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4 * 3 grinding wheel chuck L 48, 35 mm * Protective cover * Exchange grinding spindle * Tool cabinet with 4 drawers * Shelves for dto. * Operating key, operating instructions, spare parts list, circuit diagram * Machine and accessories completely overhauled and with electrical test certificate! * 12 months warranty !
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 10000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            weight of the machine ca. 0,6 t
            Description :

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            1218 HS
            400 V, 50 Hz, with CEE plug and cable

            Colour: light grey RAL 7035
            Stand traffic grey RAL 7042 (new paint)

            axial grinding spindle adjustment

            Accessories:

            * Machine stand and carrier plate ground

            * Complete electrical conversion included:

            > new three-phase drive
            > new brake motor
            > new frequency controller
            > new built-in electrics touch-proof
            > Fi circuit breaker
            > EMC cables and screwed connections
            > new protective cables
            > new control panel
            > Emergency stop switch

            * Opto electronic measuring device with microscope, support arm, parking space,
            new Fagor digital readout and scales completely mounted and adjusted

            * dividing head Sk 40 with prisms and 24 R dividing disc
            * 1 graduated disc 14 + 22 R each
            * Twist and back-grinding device with rack and pinion housing
            * Setting gauge
            * Complete tooth support
            * pivoting support finger
            * LED lamp
            * Dust extraction device without vacuum cleaner
            * Univ. adjustment gauge
            * 10 direct collets Sk 40 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20 22/ 25 mm
            * Collet sleeve with forcing nut
            * 1 set = 35 collets S 20x2 from 1.0 - 18.0 mm by 0.5 mm each
            * 1 taper reducing sleeve Sk 40 x Mk 1/ 2/ 3/ 4
            * 3 grinding wheel chuck L 48, 35 mm
            * Protective cover
            * Exchange grinding spindle
            * Tool cabinet with 4 drawers
            * Shelves for dto.
            * Operating key, operating instructions, spare parts list, circuit diagram

            * Machine and accessories completely overhauled and with electrical test
            certificate!
            * 12 months warranty !
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal DECKEL S11


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04484 · Tool Grinder - Universal

          DECKEL - S11 - - 1986 -

          Technical details
          max. grinding diameter 238 - 620 mm︱grinding length 190 mm︱workpiece length 380 - 940 mm︱spindle turning speed - stepless 2 - 10000 U/min︱current capacity 380 kVA︱power capacity - grinding motor 1,1 kW︱total power requirement 2,2 kW︱operating key and instruction ︱Mechanic: very good ︱Optical condition: very good ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 745 380 V, 50 Hz, with CEE plug and. electric wire Color green !! Original paint !! ! Machine is partially overhauled and in absolute top condition! motorized height adjustment, axial grinding spindle adjustment Accessories: (accessories can be varied on request) * Dividing head Sk 40 with dividing disk 24 R * 3 dividing discs of your choice * Tooth support complete * Twist u. Relief grinding device with rack housing * Dressing device * Dressing diamond * Motorized drive * Halogen lamp * Dust extraction device without vacuum cleaner * Setting gauge * Clamping nut * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * 10 collets Sk 40, 6, 8, 10, 12, 14, 16, 18, 20, 22, 25 mm * 1 set = 35 pieces cover collets 1.0 - 17.5 mm 0.5 mm stgd * Pliers sleeve with extraction nut * 8 grinding wheel chucks * Protective cover * Tool cabinet and shelves * 1 set of technical grinding instructions * Operating key, operating instructions, spare parts list, circuit diagram * Machine in top condition, workshop-checked, partially overhauled and with electrical acceptance report. Machine 12 months warranty (domestic)
            max. grinding diameter 238 - 620 mm
            grinding length 190 mm
            workpiece length 380 - 940 mm
            spindle turning speed - stepless 2 - 10000 U/min
            current capacity 380 kVA
            power capacity - grinding motor 1,1 kW
            total power requirement 2,2 kW
            Description :

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            745
            380 V, 50 Hz, with CEE plug and. electric wire

            Color green !! Original paint !!

            ! Machine is partially overhauled and in absolute top condition!

            motorized height adjustment, axial grinding spindle adjustment

            Accessories: (accessories can be varied on request)

            * Dividing head Sk 40 with dividing disk 24 R
            * 3 dividing discs of your choice
            * Tooth support complete
            * Twist u. Relief grinding device with rack housing
            * Dressing device
            * Dressing diamond
            * Motorized drive
            * Halogen lamp
            * Dust extraction device without vacuum cleaner
            * Setting gauge
            * Clamping nut
            * 4 cone reducing sleeves Sk 40 x Mk 1, 2, 3, 4
            * 10 collets Sk 40, 6, 8, 10, 12, 14, 16, 18, 20, 22, 25 mm
            * 1 set = 35 pieces cover collets 1.0 - 17.5 mm 0.5 mm stgd
            * Pliers sleeve with extraction nut
            * 8 grinding wheel chucks
            * Protective cover
            * Tool cabinet and shelves
            * 1 set of technical grinding instructions

            * Operating key, operating instructions, spare parts list, circuit diagram

            * Machine in top condition, workshop-checked, partially overhauled and with
            electrical acceptance report.

            Machine 12 months warranty (domestic)
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal SAACKE UW I A


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04523 · Tool Grinder - Universal

          SAACKE - UW I A - - 1980 -

          Technical details
          max. grinding diameter 250 mm︱grinding length 230 mm︱workpiece length 450 mm︱turning speeds 2100 -6000 U/min︱centre height 125 mm︱grinding table stroke 355 mm︱table - swivable + / - 90 Grad︱engine output 0,9 kW︱weight of the machine ca. 0,5 t︱operating key and instruction ︱Optical condition: good ︱Mechanic: good ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 704 80 380 V, with CEE plug u. electric wire Color green Equipment: * Dividing attachment Mk 5 with radial adjustment possibility * 24er index plate * pliers tubing * torque pipe * 4 collets 10, 12, 16, 20 mm * 2 MK tips * 2 spiral drill drinding tower for 3 - 30 mm for conical shell flange * 2 grinding plate connectors * Protective cover * Instruction manual u. key * Machine is tested for function and supplied with electrical test protocol
            max. grinding diameter 250 mm
            grinding length 230 mm
            workpiece length 450 mm
            turning speeds 2100 -6000 U/min
            centre height 125 mm
            grinding table stroke 355 mm
            table - swivable + / - 90 Grad
            engine output 0,9 kW
            weight of the machine ca. 0,5 t
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            704 80
            380 V, with CEE plug u. electric wire
            Color green

            Equipment:
            * Dividing attachment Mk 5 with radial adjustment possibility
            * 24er index plate
            * pliers tubing
            * torque pipe
            * 4 collets 10, 12, 16, 20 mm
            * 2 MK tips
            * 2 spiral drill drinding tower for 3 - 30 mm
            for conical shell flange
            * 2 grinding plate connectors
            * Protective cover
            * Instruction manual u. key

            * Machine is tested for function and supplied with electrical test
            protocol
          Datasheet
          Request / Contact
          used  Tool Grinder - Universal SAACKE UW I A


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04570 · Tool Grinder - Universal

          SAACKE - UW I A - - 1975 -

          Technical details
          max. grinding diameter 250 mm︱grinding length 230 mm︱workpiece length 450 mm︱turning speeds 2100 -6000 U/min︱centre height 125 mm︱grinding table stroke 355 mm︱table - swivable + / - 90 Grad︱engine output 0,9 kW︱weight of the machine ca. 0,5 t︱operating key and instruction ︱Optical condition: good ︱Mechanic: good ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 537 75 380 V, with CEE plug and electric wire Color green Equipment: * Milling device with air-bearing sleeve, complete with Clamping angle (for collets) * 18 collets 3 - 25 mm * Draw tube * Universal clamping head Mk 5 * 3 cone reducing sleeves * Tooth support * 2 grinding wheel holders * Protective cover * Operating instructions and key * Machine is checked for function and with an electrical test report delivered.
            max. grinding diameter 250 mm
            grinding length 230 mm
            workpiece length 450 mm
            turning speeds 2100 -6000 U/min
            centre height 125 mm
            grinding table stroke 355 mm
            table - swivable + / - 90 Grad
            engine output 0,9 kW
            weight of the machine ca. 0,5 t
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            537 75
            380 V, with CEE plug and electric wire
            Color green

            Equipment:


            * Milling device with air-bearing sleeve, complete with
            Clamping angle (for collets)
            * 18 collets 3 - 25 mm
            * Draw tube
            * Universal clamping head Mk 5
            * 3 cone reducing sleeves
            * Tooth support
            * 2 grinding wheel holders
            * Protective cover
            * Operating instructions and key

            * Machine is checked for function and with an electrical test report
            delivered.
          Datasheet
          Request / Contact

          Bandsaw - Horizontal

          used  Bandsaw - Horizontal ZIMMER Z185/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04495 · Bandsaw - Horizontal

          ZIMMER - Z185/R - - 2021 -

          Technical details
          cutting diameter 185 mm︱saw band length 2.080 x 20 x 0,90 mm︱cutting width 100x185 mm︱connected load frequency 230 V︱band speed 35 und 70 stufenlos m/min︱mitre joint 90° (angle-iron till) 60 °︱total power requirement 2,35 KW︱weight of the machine ca. 190 kg︱dimensions of the machine ca. 1280 x 550 x 1480 mm︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 8512032 An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw arm remains in the desired position. * Metal band saw with stepless electronic speed regulation and automatic lowering * Selector switch for hydraulically controlled or manual belt arm lowering * Saw arm can be swiveled up to 60 ° to the right * Quick release vice * Tape guide with 8 ball bearings * Hydraulic saw band tensioning with tensioning pressure display and cut off of the band breakage * including coolant device * including machine base cabinet The Z185 / R has the following standard equipment: - hydraulic cylinders - emulsion pump - eccentric clamp - underframe - saw band The machine is fully assembled and delivered immediately ready for use Technical specifications: Motor power: 230 V / 2.35 kW Cutting speed: 30 - 75 m / min. stepless Saw band dimensions: 2.085 x 20x 0.9 mm Footprint: 550 x 1,280 x 1,480 mm Working height: 915 mm Weight: 190 kg
            cutting diameter 185 mm
            saw band length 2.080 x 20 x 0,90 mm
            cutting width 100x185 mm
            connected load frequency 230 V
            band speed 35 und 70 stufenlos m/min
            mitre joint 90° (angle-iron til. 60 °
            total power requirement 2,35 KW
            weight of the machine ca. 190 kg
            dimensions of the machine ca. 1280 x 550 x 1480 mm
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            8512032

            An inexpensive and powerful band saw for sporadic workshop use

            The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° -
            60 ° left.
            After the cut, the machine stops due to a safety limit switch.
            The lowering is continuously adjustable via a hydraulic system.
            The manual lifting of the saw arm after the cut can - on any
            Position. The saw arm remains in the desired position.

            * Metal band saw with stepless electronic speed regulation and
            automatic lowering
            * Selector switch for hydraulically controlled or manual belt arm lowering
            * Saw arm can be swiveled up to 60 ° to the right
            * Quick release vice
            * Tape guide with 8 ball bearings
            * Hydraulic saw band tensioning with tensioning pressure display and cut off of
            the band breakage
            * including coolant device
            * including machine base cabinet

            The Z185 / R has the following standard equipment:

            - hydraulic cylinders
            - emulsion pump
            - eccentric clamp
            - underframe
            - saw band

            The machine is fully assembled and delivered immediately ready for use

            Technical specifications:
            Motor power: 230 V / 2.35 kW
            Cutting speed: 30 - 75 m / min. stepless
            Saw band dimensions: 2.085 x 20x 0.9 mm
            Footprint: 550 x 1,280 x 1,480 mm
            Working height: 915 mm
            Weight: 190 kg

          Datasheet
          Request / Contact
          used  Bandsaw - Horizontal ZIMMER Z 100/R


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04552 · Bandsaw - Horizontal

          ZIMMER - Z 100/R - - 2019 -

          Technical details
          cutting diameter 105 mm︱saw band length 1140 x 13 x 0,65 mm︱cutting width 100/100x105 mm︱capacity 60 degrees: round mm︱capacity 45 degrees: flat 55 x 55 mm︱capacity 45 degrees: round 60 mm︱total power requirement 0,18 kW︱weight of the machine ca. 18 kg︱dimensions of the machine ca. ca.400 x 300 x 350 mm︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 14322 16392 Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use.
            cutting diameter 105 mm
            saw band length 1140 x 13 x 0,65 mm
            cutting width 100/100x105 mm
            capacity 45 degrees: flat 55 x 55 mm
            capacity 45 degrees: round 60 mm
            total power requirement 0,18 kW
            weight of the machine ca. 18 kg
            dimensions of the machine ca. ca.400 x 300 x 350 mm
            Description :

            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            14322

            16392

            Gear drive, automatic belt tension, electronically adjustable
            Belt speed from 20 to 100 m / min
            Due to the light aluminum housing, the machine is very light and therefore good
            mobile use.
          Datasheet
          Request / Contact

          Adjusting Instrument

          used  Adjusting Instrument HAHN & KOLB/Royal 2EP 420/170 SE


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04616 · Adjusting Instrument

          HAHN & KOLB/Royal - 2EP 420/170 SE - - 0 -

          Technical details
          travel -z axis - mm︱measuring range X-axis - mm︱measuring range Y-axis - mm︱Table dimensions - mm︱tool diameter 0 - 300 mm︱travel -x axis 150 mm︱travel -z axis 0-360 mm︱tool taper Sk 40 ︱weight kg︱Optical condition: good ︱Mechanic: normal ︱The machine can be viewed under current.
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 571 220 V, 50 Hz * 2 axis Heidenhain digital * Sk 40 inclusion * Projector magnification 20 times
            travel -z axis - mm
            measuring range X-axis - mm
            measuring range Y-axis - mm
            Table dimensions - mm
            tool diameter 0 - 300 mm
            travel -x axis 150 mm
            travel -z axis 0-360 mm
            tool taper Sk 40
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            571

            220 V, 50 Hz

            * 2 axis Heidenhain digital
            * Sk 40 inclusion
            * Projector magnification 20 times
          Datasheet
          Request / Contact

          Rotary Table

          used  Rotary Table DECKEL Rundtisch


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-02820 · Rotary Table

          DECKEL - Rundtisch - - -

          Technical details
          table diameter 500 mm︱table load 500 kg︱table height 150 mm︱Total height 150 mm︱groove width 16 mm︱flute distance 125 ︱total power requirement kW︱weight of the machine ca. 0,18 t︱dimensions of the machine ca. m︱
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Direct division by partial circle and vernier, screw swivel, 3 sheaves 59, 61, 63
            table diameter 500 mm
            table load 500 kg
            table height 150 mm
            Total height 150 mm
            groove width 16 mm
            flute distance 125
            weight of the machine ca. 0,18 t
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.

            Direct division by partial circle and vernier, screw swivel,
            3 sheaves 59, 61, 63
          Datasheet
          Request / Contact

          Dust Exhauster

          used  Dust Exhauster NILFISK ALTO Attix 33 2 H PC


          • Schmeisser Werkzeugmaschinen
          • Lochfelbenstrasse 2
          • 89312 Günzburg
          • Deutschland

          • 08221-3689630
            08221-3689632
          • info@schmeisser.net
            www.schmeisser.net
          #1035-04317 · Dust Exhauster

          NILFISK ALTO - Attix 33 2 H PC - - -

          Technical details
          suction capacity - ︱volume capacity 4500 l/min︱ 38 mm︱low pressure kpa︱Electric capacity 1400 W︱voltage 220-240 V︱Weight 14,5 kg︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. 0,57x0,39x0,52 m︱Condition: new / unused
          Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. 220-240V, 50-60 / 16Hz Colour blue * Safety vacuum cleaner H class asbestos * 3-stage filtration * mobile Vacuum cleaner is supplied against additional charge of 93,90 EUR with 1 pack safety dust bag!
            suction capacity -
            volume capacity 4500 l/min
            38 mm
            Electric capacity 1400 W
            voltage 220-240 V
            Weight 14,5 kg
            dimensions of the machine ca. 0,57x0,39x0,52 m
            Description :
            Please notice:
            We would be happy to make you a free offer. However, please understand that we
            only process inquiries with complete address details.


            220-240V, 50-60 / 16Hz
            Colour blue

            * Safety vacuum cleaner H class asbestos
            * 3-stage filtration
            * mobile

            Vacuum cleaner is supplied against additional charge of 93,90 EUR with 1 pack
            safety dust bag!
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

            Trader Profile:   Schmeisser Werkzeugmaschinen

          Contact Trader



            Schmeisser Werkzeugmaschinen
           Lochfelbenstrasse 2
            89312 Günzburg
            Deutschland
            08221-3689630">08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net

          Profile of Trader

          Schmeisser machine tools welcomes you.

          Let us invite you to our family run business, in which experience, tradition and innovation create a coherent corporate image.

           

          We are your competent and reliable partner in high quality drilling, milling, turning and grinding machine tools, no matter if used or new, conventional or CNC controlled.

           

          Our machines operate just as we do: efficiently and precisely. Responsible, conscientious action towards our business partners, colleagues and our environment is our priority. The Schmeisser team stands for competence, honesty and fairness. All this makes us a strong, world wide operating partner that is keeping its word.

           

          Our 2.300 m² headquarters located in Guenzburg with its advanced workshop, warehouse and commercial spaces offer optimum conditions to meet all requirements of the highest customer satisfaction. The centerpiece is our master workshop with more than 500 m² and a 2-story high-bay warehouse system.

           

          .Used and new machine tools

          .Purchase and sale

          .Competent and comprehensive and consulting n including older machine types

          .Partial and general overhauling

          .Repair, inspection and cleaning

          .Spare parts and maintenance

          .Customized equipment of machines to meet your requirements

          .After-sale support and service

          .Fast and accurate business processing

          .Purchase of complete machinery stock (e. g. in case of company liquidations)

          .Financing

          .Transportation solutions and machine settings

          .Machine demonstration in our commercial spaces

          .Electric test reports

          .Search and find service: we will find your desired machine tool

           

          We are looking forward to meeting you!

          Schmeisser Werkzeugmaschinen

          Owner: Ralf Schmeisser

           

          Lochfelbenstrasse 2

          D - 89312 Guenzburg

          Fon +49 (0)8221 368 96 30

          Fax +49 (0)8221 368 96 32

          E-Mail  




          Schmeisser Werkzeugmaschinen   89312 Günzburg Lochfelbenstrasse 2 Deutschland
          Schmeisser Werkzeugmaschinen

          Lochfelbenstrasse 2



          Contact Trader


            Schmeisser Werkzeugmaschinen
           Lochfelbenstrasse 2
            89312 Günzburg
            Deutschland
            08221-3689630
            08221-3689632
            info@schmeisser.net
            www.schmeisser.net
            Contact person:
          Herrn Ralf Schmeisser 08221-3689630

           




          Machine category


          Bandsäge - horizontal · Bearbeitungszentrum - Vertikal · Bohrerschleifmaschine · Drehmaschine - zyklengesteuert · Einstellgerät · Flachschleifmaschine - Horizontal · Leit- und Zugspindeldrehmaschine · Rundtisch · Schnellradialbohrmaschine · Staubabsaugung · Werkzeugfräsmaschine - Universal · Werkzeugschleifmaschine - Universal ·