European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Plants complete

          Machinelist: Plants, complete


          Plants, complete

          used Production Lines Plants, complete HAN S LASER OP Maskenanlage


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211102 · Plants, complete

          HAN S LASER - OP Maskenanlage - - ca. 2021 -

          Technical details
          machine measurements 6.850 x 3.600 x 1.900 mm︱machine weight 5.000 kg︱power capacity 9 kW︱
          Condition: used - as good as new unit is still completely packed Specification: Medical surgical mask system complete Consisting of: - See sketches in the attachment Summary of the equipment: This machine is mainly used for automatic forming of plane mask: the whole roll of cloth is driven by roller after being unrolled, and the cloth is folded and wrapped automatically. The nose bridge strip is rolled up for traction and unrolled. After cutting with a fixed length, it is imported into the edge cloth. The two sides are welded to the seal by ultrasonic welding. The mask was transported to two mask ear belt welding stations by the assembly line, and the mask was finally formed by ultrasonic welding. After the mask is made, it is transported to the flat belt line through the assembly line for collection. - CE certified is available - Space requirement L/W/H approx.: 6,850 x 3,600 x 1,900 mm - Weight approx.: 5,000 kg - Paint finish: RAL 9003 - Voltage: 220V AC, 50 Hz - Total power approx.: 9 kW
            machine measurements 6.850 x 3.600 x 1.900 mm
            machine weight 5.000 kg
            power capacity 9 kW
            Description :
            Condition: used - as good as new
            unit is still completely packed

            Specification: Medical surgical mask system complete

            Consisting of:
            - See sketches in the attachment

            Summary of the equipment:
            This machine is mainly used for automatic forming of plane mask:
            the whole roll of cloth is driven by roller after being unrolled,
            and the cloth is folded and wrapped automatically.
            The nose bridge strip is rolled up for traction and unrolled.
            After cutting with a fixed length, it is imported into the edge cloth.
            The two sides are welded to the seal by ultrasonic welding.
            The mask was transported to two mask ear belt welding stations
            by the assembly line, and the mask was finally formed by ultrasonic
            welding.
            After the mask is made, it is transported to the flat belt line
            through the assembly line for collection.

            - CE certified is available
            - Space requirement L/W/H approx.: 6,850 x 3,600 x 1,900 mm
            - Weight approx.: 5,000 kg
            - Paint finish: RAL 9003
            - Voltage: 220V AC, 50 Hz
            - Total power approx.: 9 kW

          Datasheet
          Request / Contact
          used Production Lines Plants, complete HAN S LASER FFP 2 Maskenanlage N95


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211101 · Plants, complete

          HAN S LASER - FFP 2 Maskenanlage N95 - - ca. 2019 -

          Technical details
          machine measurements 9.657 x 1.472 x 1.985 mm︱machine weight -- kg︱power capacity -- kW︱
          Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled
            machine measurements 9.657 x 1.472 x 1.985 mm
            machine weight -- kg
            power capacity -- kW
            Description :
            Condition: used - as good as new

            Specification: FFP 2 N95 mask system complete

            Consisting of:
            - see sketches in the plant
            - cycle time approx.: 35 - 50 pieces/min
            - not CE certified
            - Space requirement approx.: 9,657 x 1,472 x 1,985 mm
            - Completely assembled

          Datasheet
          Request / Contact
          used Production Lines Plants, complete GERLACH Maschinenbau Heissluft Shock Kanal 111


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G200301 · Plants, complete

          GERLACH Maschinenbau - Heissluft Shock Kanal 111 - - 2015 -

          Technical details
          machine measurements 3.000 mm︱machine weight -- kg︱power capacity 90 kW︱
            machine measurements 3.000 mm
            machine weight -- kg
            power capacity 90 kW
          Datasheet
          Request / Contact
          used Production Lines Plants, complete RSL 6000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G170803 · Plants, complete

          RSL - 6000 - - 2015 -

          Technical details
          machine measurements 8.000 mm︱machine weight 9.800 kg︱power capacity 17,5 kW︱
          Condition: used Specification: Batch-off plant – used - max. width rubber sheet: 600 mm - thickness rubber sheet: 4 – 10 mm - distance between banging bars: effective 140 mm - max. pendant length hanging sheet: 3600 mm - take-off linear speed: 4 – 35 m/min. frequency control of motor speed linear speed: - swinging: 0 – 40 m/min. - hinging: 0 – 1,55 m/min. - no. of cooling fans: 10 set - power cooling fans: 0,75 kW/set - total length of line: 8.000 mm - total power: 17,5 kW - final temperature sheet: room temperature +5°C - compressed air pressure: 0,4 – 0,6 Mpa - cross and longitudinal cutter, wig-wag packer for pallets - total weight: ca. 9800 kg STUCTURAL FEATURES: 1. take-off device is off the ring type conveyor belt with guide strip and without any union or joint, and equips with printer. Take-off conveyor belt, lifting and dip-in wire mesh belt all share one same frequency conversion AC speed regulating motor, which the conveying speed could be adjustable. 2. lifting bar is driven by one set cycloid pin wheel speed reducer through AC frequency conversion and the bar speed is synchronous as the speed of lifting device. 3. the sheet is uniformly coated with the lubricator by dipping without polluting the environment. Its cooling effect is better than the spraying. 4. the hanging up area is fully closed, which adopts the blower to blow the sheet at a slant. So it improves the air flowing direction and cooling effect.
            machine measurements 8.000 mm
            machine weight 9.800 kg
            power capacity 17,5 kW
            Description :
            Condition: used

            Specification: Batch-off plant – used

            - max. width rubber sheet: 600 mm
            - thickness rubber sheet: 4 – 10 mm
            - distance between banging bars: effective 140 mm
            - max. pendant length hanging sheet: 3600 mm
            - take-off linear speed: 4 – 35 m/min.
            frequency control of motor speed
            linear speed:
            - swinging: 0 – 40 m/min.
            - hinging: 0 – 1,55 m/min.
            - no. of cooling fans: 10 set
            - power cooling fans: 0,75 kW/set
            - total length of line: 8.000 mm
            - total power: 17,5 kW
            - final temperature sheet: room temperature +5°C
            - compressed air pressure: 0,4 – 0,6 Mpa
            - cross and longitudinal cutter, wig-wag packer for pallets
            - total weight: ca. 9800 kg

            STUCTURAL FEATURES:

            1. take-off device is off the ring type conveyor belt with guide strip
            and without any union or joint, and equips with printer. Take-off
            conveyor belt, lifting and dip-in wire mesh belt all share one same
            frequency conversion AC speed regulating motor, which the conveying
            speed could be adjustable.

            2. lifting bar is driven by one set cycloid pin wheel speed reducer through
            AC frequency conversion and the bar speed is synchronous as the speed of
            lifting device.

            3. the sheet is uniformly coated with the lubricator by dipping without
            polluting the environment. Its cooling effect is better than the spraying.

            4. the hanging up area is fully closed, which adopts the blower to blow
            the sheet at a slant. So it improves the air flowing direction and
            cooling effect.
          Datasheet
          Request / Contact
          used Production Lines Plants, complete HANS VON DER HEYDE Pultrusions-/Heizlinie


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G200701 · Plants, complete

          HANS VON DER HEYDE - Pultrusions-/Heizlinie - - 2015 -

          Technical details
          machine measurements 12.200x1.800x800 mm︱machine weight 1.040 kg︱power capacity 27 kW︱
            machine measurements 12.200x1.800x800 mm
            machine weight 1.040 kg
            power capacity 27 kW
          Datasheet
          Request / Contact
          used Production Lines Plants, complete NELA ROVI Kontrollautomat fuer O-Ringe


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220102 · Plants, complete

          NELA ROVI - Kontrollautomat fuer O-Ringe - - 2011 -

          Technical details
          machine measurements 2.200 x 1.200 x 2.260 mm︱machine weight 1.000 kg︱power capacity -- kW︱
          Condition: used Specification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations - year of construction approx.: 2011 - pick-up stations: 16 - measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm) - Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day - Technical application: surface defect and crack detection on O-rings - Sorting function: Good, Bad, Undefined - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm - Weight approx.: 1,000 kg
            machine measurements 2.200 x 1.200 x 2.260 mm
            machine weight 1.000 kg
            power capacity -- kW
            Description :
            Condition: used

            Specification: automatic control machine for O-rings - second-hand
            rotary transfer machine with 16 pick-up stations

            - year of construction approx.: 2011
            - pick-up stations: 16
            - measuring range: ID from 55 - 90 mm
            cord from 2,5 - 3,5 mm (ID 55 - 70 mm)
            cord from 2.5 - 4.5 mm (ID 70 - 90 mm)
            - Part throughput: approx. 3 - 4 seconds per part
            approx. 900 - 1,200 parts per hour
            approx. 21,600 - 28,800 parts per day
            - Technical application: surface defect and crack detection
            on O-rings
            - Sorting function: Good, Bad, Undefined
            - Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm
            - Weight approx.: 1,000 kg


          Datasheet
          Request / Contact
          used Production Lines Plants, complete Berstorff Mikrowellen/Heissluft Kanal


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G220101 · Plants, complete

          Berstorff - Mikrowellen/Heissluft Kanal - - 1996 -

          Technical details
          machine measurements -- mm︱machine weight -- kg︱power capacity -- kW︱
          Condition: used - in production until approx. middle of February 2022 Specification: microwave vulcanizing line hot air channel with microwave Conversion to S7 control, 2015 - microwave vulcanizing line: MW24/HL 12x2/KK09/RA - Type: MW 24.1-200.075 - Channel length microwave approx.: 17.170 mm - Microwave feed: Number of HF generators: 4 Power per HF generator: max. 6 kW power setting: 0 / 10 - 100% Frequency of the HF generators: 2450 - 2470 MHz - channel length hot air approx.: 26.170 mm - Air heating: Number of heating zones: 3 Power per heating zone: 9,9 kW Heating zones gas heated channel air temperature max.: 250°C at the injection point - Cooling basin length approx.: 15,000 mm - belt width: 105 to 200 mm, per station - Transpot belt height approx.: 1,100 mm - number of belts: 1 - transport speed: 1 - 30 m/min - Voltage: 3 x 400 V, 50 Hz - Control voltage: 230 V, 50 Hz/ 24 V DC - Material running direction: from right to left - Conversion to Siemens S7 control was made in 2015 Documentation in German language available. plant will be available from approx. kW 7/2022. A second identical system will be available from kW 11/2022, but with the material material flow direction from left to right. In this second the control panel is defective. However, it can be repaired at Siemens.
            machine measurements -- mm
            machine weight -- kg
            power capacity -- kW
            Description :
            Condition: used - in production
            until approx. middle of February 2022

            Specification: microwave vulcanizing line
            hot air channel with microwave
            Conversion to S7 control, 2015

            - microwave vulcanizing line: MW24/HL 12x2/KK09/RA
            - Type: MW 24.1-200.075
            - Channel length microwave approx.: 17.170 mm
            - Microwave feed:
            Number of HF generators: 4
            Power per HF generator: max. 6 kW
            power setting: 0 / 10 - 100%
            Frequency of the HF generators: 2450 - 2470 MHz
            - channel length hot air approx.: 26.170 mm
            - Air heating:
            Number of heating zones: 3
            Power per heating zone: 9,9 kW
            Heating zones gas heated
            channel air temperature max.: 250°C at the injection point
            - Cooling basin length approx.: 15,000 mm
            - belt width: 105 to 200 mm, per station
            - Transpot belt height approx.: 1,100 mm
            - number of belts: 1
            - transport speed: 1 - 30 m/min
            - Voltage: 3 x 400 V, 50 Hz
            - Control voltage: 230 V, 50 Hz/ 24 V DC
            - Material running direction: from right to left
            - Conversion to Siemens S7 control was made in 2015

            Documentation in German language available.

            plant will be available from approx. kW 7/2022. A second
            identical system will be available from kW 11/2022, but with the material
            material flow direction from left to right. In this second
            the control panel is defective.
            However, it can be repaired at Siemens.

          Datasheet
          Request / Contact
          used Production Lines Plants, complete GERLACH Maschinenbau Heissluft Kanal HLK 150-1K


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211105 · Plants, complete

          GERLACH Maschinenbau - Heissluft Kanal HLK 150-1K - - 1991 -

          Technical details
          machine measurements -- mm︱machine weight -- kg︱power capacity 37,5 kW︱
          Condition: used - was in production until approx. middle of November 2021 Specification: Hot air duct 1-tier, electric - duct type: HLK 150-1K, electrically heated - duct length: 9.000 mm - Belt width: 150 mm - Belt height approx.: 1,250 mm - Max. profile height: 60 mm - Number of belts: 1 - Belt control: automatic, 3-point control - Transport speed: 4 - 40 m/min - Speed display: digital - Drive motor: power gear motor 0,5 kW - Voltage: 220/380V, 50Hz, N - Number of heating zones: 3x electrically heated - Electric air heater: 3x 12.5 kW - Air temperature max.: 320°C - All channels with fire extinguishing nozzles Documentation in German available. The gas burners were regularly serviced and if necessary replaced if necessary - Heat exchanger: - Space requirement heat exchanger approx.: 3,100 x 1,500 x 4,000 mm (with platform when installed above the duct) - Total weight of heat exchanger approx.: 1,000 kg with platform
            machine measurements -- mm
            machine weight -- kg
            power capacity 37,5 kW
            Description :
            Condition: used - was in production
            until approx. middle of November 2021

            Specification: Hot air duct 1-tier, electric

            - duct type: HLK 150-1K, electrically heated
            - duct length: 9.000 mm
            - Belt width: 150 mm
            - Belt height approx.: 1,250 mm
            - Max. profile height: 60 mm
            - Number of belts: 1
            - Belt control: automatic, 3-point control
            - Transport speed: 4 - 40 m/min
            - Speed display: digital
            - Drive motor: power gear motor 0,5 kW
            - Voltage: 220/380V, 50Hz, N
            - Number of heating zones: 3x electrically heated
            - Electric air heater: 3x 12.5 kW
            - Air temperature max.: 320°C
            - All channels with fire extinguishing nozzles

            Documentation in German available.
            The gas burners were regularly serviced and if necessary
            replaced if necessary

            - Heat exchanger:
            - Space requirement heat exchanger approx.: 3,100 x 1,500 x 4,000 mm
            (with platform when installed above
            the duct)
            - Total weight of heat exchanger approx.: 1,000 kg with platform


          Datasheet
          Request / Contact
          used Production Lines Plants, complete GERLACH Maschinenbau Heissluft Kanal HLK 114 Gas


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211104 · Plants, complete

          GERLACH Maschinenbau - Heissluft Kanal HLK 114 Gas - - 1991 -

          Technical details
          machine measurements 20.000 x 2.580 x 2.350 mm︱machine weight 6.000 kg︱power capacity 120 kW︱
          Condition: used - was in production until approx. mid November 2021 Specification: Hot air duct with cooling duct underneath - duct type: HLK 114 gas, gas heated - duct length: 18.000 mm - belt width: 150 mm - Belt lengths: - Upper belt: 39,430 mm - Middle belt: 38,110 mm - Lower belt: 37,360 mm - Max. profile height: 60 mm - Transport speed: 4 - 40 m/min - Drive motors: permanent-magnet gear motor 3x 0.37 kW, 170 V - Belt control motors: Three-phase motor 3x 0.045 kW, 220/380V/50Hz - Blow-in fan: RD7, 220/380V50Hz, 2.2 kW - Main exhaust fan: HRD 65/7, 380V/50Hz, 7.5 kW - Number of heating zones: 6x gas-heated - Gas burner: Nominal power: 20 kW/burner - Air temperature max.: 320°C - All ducts with fire extinguishing nozzles Cooling duct: - Drive motors: Permanent power geared motor 2x 0.37 kW, 170 V - Side channel compressor: SD 740, 380V/50Hz, 6 kW - Channel length: 18,000 mm - Belt lengths: Upper belt: 37,550 mm Lower belt: 38,890 mm - Belt width: 180 mm - Profile height max.: 60 mm - Transport speed: 4 - 40 m/min Documentation available in German. The gas burners were regularly serviced and replaced as required. - Heat exchanger: WT 160 G - Space requirement heat exchanger approx.: 3,100 x 1,500 x 4,000 mm (with platform for installation above of the duct) - Total weight of heat exchanger approx.: 1,000 kg with platform
            machine measurements 20.000 x 2.580 x 2.350 mm
            machine weight 6.000 kg
            power capacity 120 kW
            Description :
            Condition: used - was in production
            until approx. mid November 2021

            Specification: Hot air duct with cooling duct underneath

            - duct type: HLK 114 gas, gas heated
            - duct length: 18.000 mm
            - belt width: 150 mm
            - Belt lengths:
            - Upper belt: 39,430 mm
            - Middle belt: 38,110 mm
            - Lower belt: 37,360 mm
            - Max. profile height: 60 mm
            - Transport speed: 4 - 40 m/min
            - Drive motors: permanent-magnet gear motor
            3x 0.37 kW, 170 V
            - Belt control motors: Three-phase motor
            3x 0.045 kW, 220/380V/50Hz
            - Blow-in fan: RD7, 220/380V50Hz, 2.2 kW
            - Main exhaust fan: HRD 65/7, 380V/50Hz, 7.5 kW
            - Number of heating zones: 6x gas-heated
            - Gas burner: Nominal power: 20 kW/burner
            - Air temperature max.: 320°C
            - All ducts with fire extinguishing nozzles


            Cooling duct:
            - Drive motors: Permanent power geared motor
            2x 0.37 kW, 170 V
            - Side channel compressor: SD 740, 380V/50Hz, 6 kW
            - Channel length: 18,000 mm
            - Belt lengths:
            Upper belt: 37,550 mm
            Lower belt: 38,890 mm
            - Belt width: 180 mm
            - Profile height max.: 60 mm
            - Transport speed: 4 - 40 m/min

            Documentation available in German.
            The gas burners were regularly serviced and replaced as
            required.

            - Heat exchanger: WT 160 G
            - Space requirement heat exchanger approx.: 3,100 x 1,500 x 4,000 mm
            (with platform for installation above of the duct)
            - Total weight of heat exchanger approx.: 1,000 kg with platform

          Datasheet
          Request / Contact
          used Production Lines Plants, complete PAAL Verpackungsmaschinen Verpackungsanlage


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G211103 · Plants, complete

          PAAL Verpackungsmaschinen - Verpackungsanlage - - 1989 -

          Technical details
          machine measurements BxT 4.067 x 3.186 mm︱machine weight -- kg︱power capacity -- kW︱
          Condition: used Specification: PAAL cartoning machine, type Elematic 2 for folding boxes: sales carton packaging machine - year of construction: 1989 - for the following inner dimensions of folding boxes: width: 80 - 200 mm depth: 90 - 220 mm height: 16 - 100 mm - Folding carton and blank see attachment - Max. number of cycles: 160 pieces/min. or 10 folding boxes/min. - with gluing unit make Nordson PROblue 4 - Space requirement, installation area W/D approx.: 4,067 x 3,186 mm
            machine measurements BxT 4.067 x 3.186 mm
            machine weight -- kg
            power capacity -- kW
            Description :
            Condition: used

            Specification: PAAL cartoning machine, type Elematic 2
            for folding boxes:
            sales carton packaging machine

            - year of construction: 1989
            - for the following inner dimensions of folding boxes:
            width: 80 - 200 mm
            depth: 90 - 220 mm
            height: 16 - 100 mm
            - Folding carton and blank see attachment
            - Max. number of cycles: 160 pieces/min.
            or 10 folding boxes/min.
            - with gluing unit make Nordson PROblue 4
            - Space requirement,
            installation area W/D approx.: 4,067 x 3,186 mm

          Datasheet
          Request / Contact
          used Production Lines Plants, complete MEB Batch-Off 700


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-G181201 · Plants, complete

          MEB - Batch-Off 700 - - -

          Technical details
          machine measurements ca. 12.000 mm︱machine weight -- kg︱power capacity -- kW︱ 550 mm︱
            machine measurements ca. 12.000 mm
            machine weight -- kg
            power capacity -- kW
            550 mm
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •