European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Mixing mill

          Machinelist: Mixing mill


          Mixing mill

          used Mixing Mixing mill C2 DUPLO 700 duplocom


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A160302 · Mixing mill

          C2 - DUPLO 700 duplocom - - neu -

          Technical details
          roll diameter 350 mm︱roll length 700 mm︱rolls drilled peripher ︱Nip adjustment hydraulisch 0︱total power requirement 2x 15 kW︱
          Condition: new, with CE mark, Specification: Two Roll Mill 350 x 700 mm - new - cylinder diameter: 350 mm - cylinder length: 700 mm - cylinder boring: peripherally drilled - cylinder bearings: with grease lubrication - 2 cylindera chromed - nip admustment: hydraulically - new hydraulic unit - tipper guiding plates of nylon-polyethylen-material - stainless steel tray - bi-directional bars - AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz - bevel gearboxes of transmission: 2 pcs - painting: with RAL colours acc. to customer’s specification - complete machine protection with stainless steel carters - new electric cabinet - new electrical system - new machine on-board system - new control panel Touchpanel 7" - PLC system: 1 piece, brand Siemens - inverter system: 2 pcs, brand Siemens, for variable speed of each cylinder - safety guards: according to standard rules complying with EN 1417:3.2015 - CE mark - user and maintenance manual in English - new machine with 1 year guarantee and in accordance with standard rules available against additional charge: • adjustable guiding plate to reduce the working table of cylinders until it is half about • temperature sensors and visualization of values of cylinder temperature on the control panel
            roll diameter 350 mm
            roll length 700 mm
            rolls drilled peripher
            Nip adjustment hydraulisch 0
            total power requirement 2x 15 kW
            Description :
            Condition: new, with CE mark,

            Specification: Two Roll Mill 350 x 700 mm - new

            - cylinder diameter: 350 mm
            - cylinder length: 700 mm
            - cylinder boring: peripherally drilled
            - cylinder bearings: with grease lubrication
            - 2 cylindera chromed
            - nip admustment: hydraulically
            - new hydraulic unit
            - tipper guiding plates of nylon-polyethylen-material
            - stainless steel tray
            - bi-directional bars
            - AC brake motors: 2 pcs, each 15 kW, 400 V, 50 Hz
            - bevel gearboxes of transmission: 2 pcs
            - painting: with RAL colours acc. to customer’s specification
            - complete machine protection with stainless steel carters
            - new electric cabinet
            - new electrical system
            - new machine on-board system
            - new control panel Touchpanel 7"
            - PLC system: 1 piece, brand Siemens
            - inverter system: 2 pcs, brand Siemens, for variable
            speed of each cylinder
            - safety guards: according to standard rules complying with EN 1417:3.2015
            - CE mark
            - user and maintenance manual in English
            - new machine with 1 year guarantee and in accordance with standard rules

            available against additional charge:
            • adjustable guiding plate to reduce the working table of cylinders until
            it is half about
            • temperature sensors and visualization of values of cylinder temperature
            on the control panel
          Datasheet
          Request / Contact
          used Mixing Mixing mill ITALMEC Laborwalzwerk 150x300


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A191002 · Mixing mill

          ITALMEC - Laborwalzwerk 150x300 - - n.b. -

          Technical details
          roll diameter 150 mm︱roll length 300 mm︱rolls drilled Flaschenhals ︱Nip adjustment hydraulisch ︱total power requirement 4 kW︱
          condition: used, overhauled Specification: Laboratory Rolling Mill 150 x 300 mm - second-hand Motor under the rollers - Roller diameter approx.: 150 mm - roller length: 300 mm - Friction between the rollers - Rolls drilled with central chamber for water cooling - Rolls with new slewing rings, manufacturer MAIER, for water cooling, - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - Gap adjustment: NEW, hydraulic and as emergency system - Hydraulic unit NEW - NUE Tilting guide plates - NEW safety cage - Safety brake for emergency stop - AC brake motor: 4 kW - 400 Volt - 50 Hz - new mixing tanks made of stainless steel for the mixture - Safety devices according to current EN 1417:3/2015 - Painting: in RAL colours according to customer requirements - new electrical switch cabinet - Frequency converter, Siemens brand, for variable roll speed - Siemens PLC system S7-1200 - new control panel with touch panel Siemens KTP400 Basic - new machine cabling - two linear converters for gap monitoring between the rolls Overhauled, with 1 year warranty, CE mark, operating and maintenance instructions in German language
            roll diameter 150 mm
            roll length 300 mm
            rolls drilled Flaschenhals
            Nip adjustment hydraulisch
            total power requirement 4 kW
            Description :
            condition: used, overhauled

            Specification: Laboratory Rolling Mill 150 x 300 mm - second-hand
            Motor under the rollers

            - Roller diameter approx.: 150 mm
            - roller length: 300 mm
            - Friction between the rollers
            - Rolls drilled with central chamber for water cooling
            - Rolls with new slewing rings, manufacturer MAIER, for water cooling,
            - Rollers mounted on bronze bushes with circulating oil lubrication via pump,
            - Gap adjustment: NEW, hydraulic and as emergency system
            - Hydraulic unit NEW
            - NUE Tilting guide plates
            - NEW safety cage
            - Safety brake for emergency stop
            - AC brake motor: 4 kW - 400 Volt - 50 Hz
            - new mixing tanks made of stainless steel for the mixture
            - Safety devices according to current EN 1417:3/2015
            - Painting: in RAL colours according to customer requirements
            - new electrical switch cabinet
            - Frequency converter, Siemens brand, for variable roll speed
            - Siemens PLC system S7-1200
            - new control panel with touch panel Siemens KTP400 Basic
            - new machine cabling
            - two linear converters for gap monitoring between the rolls

            Overhauled, with 1 year warranty, CE mark, operating and maintenance instructions
            in German language

          Datasheet
          Request / Contact
          used Mixing Mixing mill RODOLFO COMERIO 700 x 2200


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190501 · Mixing mill

          RODOLFO COMERIO - 700 x 2200 - - n.b. -

          Technical details
          roll diameter 700 mm︱roll length 2200 mm︱rolls drilled Kernbohrung ︱Nip adjustment hyraulisch 0︱total power requirement 160 kW︱
            roll diameter 700 mm
            roll length 2200 mm
            rolls drilled Kernbohrung
            Nip adjustment hyraulisch 0
            total power requirement 160 kW
          Datasheet
          Request / Contact
          used Mixing Mixing mill ITAL Duplocom /Pluridrive 550x1500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A180601 · Mixing mill

          ITAL - Duplocom /Pluridrive 550x1500 - - n.b. -

          Technical details
          roll diameter 550 mm︱roll length 1500 mm︱rolls drilled Kernbohrung ︱Nip adjustment Hydraulisch ︱total power requirement 150 kW︱
          Condition used, refurbished, Specification Roll mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - Variable friction ratio between rolls - cored rolls with central chamber for water cooling - nip adjustment: NEW hydraulical - hydraulic unit: NEW - tipper guiding plates - cylinders: mounted on bronze bushings with forced oil lubrication by pump, new rotary joints for connections to water circuit - N.2 safety brake for emergency stop - N.2 AC engine 75 kW – 380 V – 50 Hz - mill tray to contain compound - bi-directional bars for safety system - visualization display to monitor gap between rolls and engine speed - electric cabinet: with PLC system NEW - N.2 inverter system for variable speed of each roll - N.1 control panel: NEW - electric machine-on-board system NEW - emergency system and relative restore - painting acc. to customer’s specification - safety devices acc. to standard rules second EN 1417:3/2015 - electric diagrams • reconditioned acc. to standard rules • incl. 1 year warranty • EC certification and • user and maintenance manual (in Englisch or German) additional option against extra charge Stockblender – reconditioned • mounted on the machine to homogenize rubber compounds New rotating knives • placed under the mill tray to cut rubber compound
            roll diameter 550 mm
            roll length 1500 mm
            rolls drilled Kernbohrung
            Nip adjustment Hydraulisch
            total power requirement 150 kW
            Description :
            Condition used, refurbished,

            Specification Roll mill 550 x 1500 mm - used

            - roll diameter: 550 mm
            - roll length: 1500 mm
            - Variable friction ratio between rolls
            - cored rolls with central chamber for water cooling
            - nip adjustment: NEW hydraulical
            - hydraulic unit: NEW
            - tipper guiding plates
            - cylinders: mounted on bronze bushings with forced
            oil lubrication by pump,
            new rotary joints for connections to water circuit
            - N.2 safety brake for emergency stop
            - N.2 AC engine 75 kW – 380 V – 50 Hz
            - mill tray to contain compound
            - bi-directional bars for safety system
            - visualization display to monitor gap between rolls and engine speed
            - electric cabinet: with PLC system NEW
            - N.2 inverter system for variable speed of each roll
            - N.1 control panel: NEW
            - electric machine-on-board system NEW
            - emergency system and relative restore
            - painting acc. to customer’s specification
            - safety devices acc. to standard rules second EN 1417:3/2015
            - electric diagrams

            • reconditioned acc. to standard rules
            • incl. 1 year warranty
            • EC certification and
            • user and maintenance manual (in Englisch or German)

            additional option against extra charge

            Stockblender – reconditioned
            • mounted on the machine to homogenize rubber compounds

            New rotating knives
            • placed under the mill tray
            to cut rubber compound
          Datasheet
          Request / Contact
          used Mixing Mixing mill Comerio Ercole Monoblock 550x1500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190603 · Mixing mill

          Comerio Ercole - Monoblock 550x1500 - - n.b. -

          Technical details
          roll diameter 550 mm︱roll length 1500 mm︱rolls drilled peripher ︱Nip adjustment hydraulisch 0︱total power requirement 110 kW︱
          Condition: used, overhauled Specification: Rolling mill 550 x 1500 mm - second-hand - Manufacturer: Comerio Ercol; - Cylinder diameter: about 500 mm; - Cylinder length: about 1500 mm; - Model: monoblock model - motor placed under cylinders; - Friction ratio between cylinders; - Peripherally drilled rolls for water cooling; - the upper edge of rolls is about 1550/1580 mm - Cylinders equipped to new rotary joints - brand MAIER - for water cooling; - Cylinders mounted on bronze bushings with forced oil lubrication by pump; - New hydraulic nip adjustments; - New hydraulic unit; - Tipper guiding plates in steel material; - Safety bi-directional belly bars; - New safety brake for emergency stop; - AC Engine: 110 kW - 400 Volt - 50 Hz; - New mill tray in stainless steel material - to contain the compound; - Painting (with color RAL in according to your specifications); - New electric cabinet with PLC system Siemens S7-1200; - N.1 new control panel; - New on-board machine system; - Safety guards for current standards in compliance to EN 1417:3.2015; Renovated and guaranteed machine with CE marking and user and maintenance CE manual in German language - overhauled according to standard regulations - with 1 year warranty - EC certification and - Operating and maintenance instructions CE manual (in English or German) Additional options: - New frequency inverter for 110 kW - New engine 110 kW - Strip cutting unit - Stockblender - used, overhauled
            roll diameter 550 mm
            roll length 1500 mm
            rolls drilled peripher
            Nip adjustment hydraulisch 0
            total power requirement 110 kW
            Description :
            Condition: used, overhauled

            Specification: Rolling mill 550 x 1500 mm - second-hand

            - Manufacturer: Comerio Ercol;
            - Cylinder diameter: about 500 mm;
            - Cylinder length: about 1500 mm;
            - Model: monoblock model - motor placed under cylinders;
            - Friction ratio between cylinders;
            - Peripherally drilled rolls for water cooling;
            - the upper edge of rolls is about 1550/1580 mm
            - Cylinders equipped to new rotary joints - brand MAIER - for water cooling;
            - Cylinders mounted on bronze bushings with forced oil lubrication by pump;
            - New hydraulic nip adjustments;
            - New hydraulic unit;
            - Tipper guiding plates in steel material;
            - Safety bi-directional belly bars;
            - New safety brake for emergency stop;
            - AC Engine: 110 kW - 400 Volt - 50 Hz;
            - New mill tray in stainless steel material - to contain the compound;
            - Painting (with color RAL in according to your specifications);
            - New electric cabinet with PLC system Siemens S7-1200;
            - N.1 new control panel;
            - New on-board machine system;
            - Safety guards for current standards in compliance to EN 1417:3.2015;
            Renovated and guaranteed machine with CE marking and user and maintenance
            CE manual in German language

            - overhauled according to standard regulations
            - with 1 year warranty
            - EC certification and
            - Operating and maintenance instructions CE manual
            (in English or German)

            Additional options:
            - New frequency inverter for 110 kW
            - New engine 110 kW
            - Strip cutting unit
            - Stockblender - used, overhauled
          Datasheet
          Request / Contact
          used Mixing Mixing mill ITAL 400 x 1100 Duplocom/pluridrive


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A191004 · Mixing mill

          ITAL - 400 x 1100 Duplocom/pluridrive - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1100 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch ︱total power requirement 2x 30 kW︱
            roll diameter 400 mm
            roll length 1100 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch
            total power requirement 2x 30 kW
          Datasheet
          Request / Contact
          used Mixing Mixing mill ITAL Monoblock 550x1500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A170501 · Mixing mill

          ITAL - Monoblock 550x1500 - - n.b. -

          Technical details
          roll diameter 550 mm︱roll length 1500 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 90 kW︱
            roll diameter 550 mm
            roll length 1500 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 90 kW
          Datasheet
          Request / Contact
          used Mixing Mixing mill Meccaniche Moderne Monobloc 400x1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A170304 · Mixing mill

          Meccaniche Moderne - Monobloc 400x1000 - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 37 kW︱
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 37 kW
          Datasheet
          Request / Contact
          used Mixing Mixing mill Meccaniche Moderne 300x700


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190201 · Mixing mill

          Meccaniche Moderne - 300x700 - - n.b. -

          Technical details
          roll diameter 300 mm︱roll length 700 mm︱rolls drilled Flaschenhals ︱Nip adjustment hydraulisch ︱total power requirement 18,5 kW︱
            roll diameter 300 mm
            roll length 700 mm
            rolls drilled Flaschenhals
            Nip adjustment hydraulisch
            total power requirement 18,5 kW
          Datasheet
          Request / Contact
          used Mixing Mixing mill COMERIO ERCOLE Monobloc 400x1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190701 · Mixing mill

          COMERIO ERCOLE - Monobloc 400x1000 - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 37 kW︱
          Condition: used, reconditioned Specification: Roll mill 400 x 1000 mm - used Monobloc model - motor placer under cylinders - roll diameter 400 mm - roll length 1000 mm - Cored rolls with central chamber for water cooling - Cylinders mounted on bronze bushings with forced oil lubrication by pump - Cylinders equipped to new rotary joints for connection to water circuit - New hydraulic nip adjustments - New hydraulic unit - Tilting guide jaws - Mill tray to contain the compound - Bi-directional bars - Safety brake for emergency stop - AC Engine: about 37 kW - 380 Volt - 50 Hz - Painting with color RAL according to customers’ specification - New command panel - Visualization display for monitoring gap between cylinders and engine speed - New electric cabinet with PLC system - New on-board machine system; - Safety guards according to current standards in compliance with EN 1417:3/2015 - Reconditioned and guaranteed machine with CE marking and manual of use and maintenance in English or German language Location: Italy Options: New inverter system Chroming of two cylinders Renovated stock blender, mounted on the machine with control system and new on-board machine system New rotating knives, placed under the mill tray to cut rubber compound.
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 37 kW
            Description :
            Condition: used, reconditioned

            Specification: Roll mill 400 x 1000 mm - used
            Monobloc model - motor placer under cylinders

            - roll diameter 400 mm
            - roll length 1000 mm
            - Cored rolls with central chamber for water cooling
            - Cylinders mounted on bronze bushings with forced oil lubrication by pump
            - Cylinders equipped to new rotary joints for connection to water circuit
            - New hydraulic nip adjustments
            - New hydraulic unit
            - Tilting guide jaws
            - Mill tray to contain the compound
            - Bi-directional bars
            - Safety brake for emergency stop
            - AC Engine: about 37 kW - 380 Volt - 50 Hz
            - Painting with color RAL according to customers’ specification
            - New command panel
            - Visualization display for monitoring gap between cylinders and engine speed
            - New electric cabinet with PLC system
            - New on-board machine system;
            - Safety guards according to current standards in compliance with EN 1417:3/2015

            - Reconditioned and guaranteed machine with CE marking and manual
            of use and maintenance in English or German language

            Location: Italy

            Options: New inverter system

            Chroming of two cylinders

            Renovated stock blender, mounted on the machine
            with control system and new on-board machine system

            New rotating knives, placed under the mill tray to
            cut rubber compound.


          Datasheet
          Request / Contact
          used Mixing Mixing mill Meccaniche Moderne Monoblock 600x1800


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190402 · Mixing mill

          Meccaniche Moderne - Monoblock 600x1800 - - n.b. -

          Technical details
          roll diameter 600 mm︱roll length 1800 mm︱rolls drilled Flaschenhals ︱Nip adjustment hydraulisch 0︱total power requirement 132 kW︱
            roll diameter 600 mm
            roll length 1800 mm
            rolls drilled Flaschenhals
            Nip adjustment hydraulisch 0
            total power requirement 132 kW
          Datasheet
          Request / Contact
          used Mixing Mixing mill Italmec Monobloc 400x1000


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A200601 · Mixing mill

          Italmec - Monobloc 400x1000 - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled Kernbohrung ︱Nip adjustment motorisch 0︱total power requirement 37 kW︱
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled Kernbohrung
            Nip adjustment motorisch 0
            total power requirement 37 kW
            Description :

          Datasheet
          Request / Contact
          used Mixing Mixing mill COMERIO ERCOLE Monoblock 600x1800


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190401 · Mixing mill

          COMERIO ERCOLE - Monoblock 600x1800 - - n.b. -

          Technical details
          roll diameter 600 mm︱roll length 1800 mm︱rolls drilled Flaschenhals ︱Nip adjustment hydraulisch 0︱total power requirement 132 kW︱
          Condition: used, completely overhauled; with warranty Specification: Rolling mill 600 x 1800 mm - second-hand Monoblock model - motor under the rollers - Roll diameter: 600 mm - Roll length: 1800 mm - Roll core with central chamber for water cooling - Friction between the rollers - hydraulic gap adjustment: new - Hydraulic unit: new - Tilting guide plates made of steel - Rollers on bronze bearing bushes with recirculating oil lubrication via pump - Rollers with new ball slewing rings, make Maier, for connection to the water circuit - AC main motor: 132 kW - 400 V - 50 Hz - Safety brake for EMERGENCY STOP - Stainless steel roller container to hold the mixture - bi-directional safety bars - Visual indication of the gap between rolls and engine speed - electric switch cabinet new with SPS, Siemens S7-1200 - New control panel with touch panel for machine parameters - Machine wiring: new - Power cable approx. 5m from switch cabinet to machine - Emergency system and memory: - Painting according to customer requirements - Safety devices according to current standard EN 1417:3/2015 - EC certificate and operating and maintenance instructions (CE manual in English or German) - electrical schematic - with 12 months warranty additionally against surcharge: - Inverter system for motor control 132 KW, make Siemens, for controllable Roller speed - Stockblender - overhauled mounted on the machine for homogenization of rubber mixtures - two new, adjustable pneumatic strip cutting knives for one rubber strip
            roll diameter 600 mm
            roll length 1800 mm
            rolls drilled Flaschenhals
            Nip adjustment hydraulisch 0
            total power requirement 132 kW
            Description :
            Condition: used, completely overhauled;
            with warranty

            Specification: Rolling mill 600 x 1800 mm - second-hand
            Monoblock model - motor under the rollers

            - Roll diameter: 600 mm
            - Roll length: 1800 mm
            - Roll core with central chamber for water cooling
            - Friction between the rollers
            - hydraulic gap adjustment: new
            - Hydraulic unit: new
            - Tilting guide plates made of steel
            - Rollers on bronze bearing bushes with recirculating oil lubrication via pump
            - Rollers with new ball slewing rings, make Maier, for connection
            to the water circuit
            - AC main motor: 132 kW - 400 V - 50 Hz

            - Safety brake for EMERGENCY STOP
            - Stainless steel roller container to hold the mixture
            - bi-directional safety bars
            - Visual indication of the gap between rolls
            and engine speed
            - electric switch cabinet new with SPS, Siemens S7-1200
            - New control panel with touch panel for machine parameters
            - Machine wiring: new
            - Power cable approx. 5m from switch cabinet to machine
            - Emergency system and memory:
            - Painting according to customer requirements
            - Safety devices according to current standard EN 1417:3/2015
            - EC certificate and operating and maintenance instructions
            (CE manual in English or German)
            - electrical schematic
            - with 12 months warranty

            additionally against surcharge:

            - Inverter system for motor control 132 KW, make Siemens, for controllable
            Roller speed

            - Stockblender - overhauled
            mounted on the machine for homogenization of rubber mixtures

            - two new, adjustable pneumatic strip cutting knives for one
            rubber strip

          Datasheet
          Request / Contact
          used Mixing Mixing mill ITAL 400 x 1000 Duplocom


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A191001 · Mixing mill

          ITAL - 400 x 1000 Duplocom - - n.b. -

          Technical details
          roll diameter 400 mm︱roll length 1000 mm︱rolls drilled peripher ︱Nip adjustment hydraulisch ︱total power requirement 2x 30 kW︱
            roll diameter 400 mm
            roll length 1000 mm
            rolls drilled peripher
            Nip adjustment hydraulisch
            total power requirement 2x 30 kW
          Datasheet
          Request / Contact
          used Mixing Mixing mill Meccaniche Moderne Monoblock 500x1500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A190602 · Mixing mill

          Meccaniche Moderne - Monoblock 500x1500 - - n.b. -

          Technical details
          roll diameter 500 mm︱roll length 1500 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 110 kW︱
          Condition: used, overhauled Specification: Rolling mill 500 x 1500 mm - second-hand - Manufacturer: Meccaniche Moderne; - Cylinder diameter: about 500 mm; - Cylinder length: about 1500 mm; - Model: monoblock model - motor placed under cylinders; - Friction ratio between cylinders; - Cored cylinders with central chamber for water cooling; - the upper edge of rolls is about 1550/1580 mm - Cylinders equipped to new rotary joints - brand MAIER - for water cooling; - Cylinders mounted on bronze bushings with forced oil lubrication by pump; - New hydraulic nip adjustments; - New hydraulic unit; - Tipper guiding plates in steel material; - Safety bi-directional belly bars; - New safety brake for emergency stop; - AC Engine: 110 kW - 400 Volt - 50 Hz; - New mill tray in stainless steel material - to contain the compound; - Painting (with color RAL in according to your specifications); - New electric cabinet with PLC system Siemens S7-1200; - N.1 new control panel; - New on-board machine system; - Safety guards for current standards in compliance to EN 1417:3.2015; Renovated and guaranteed machine with CE marking and user and maintenance CE manual in German language Additional options: - New frequency inverter for 110 kW - New engine 110 kW - Strip cutting unit - Stockblender - used, overhauled
            roll diameter 500 mm
            roll length 1500 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 110 kW
            Description :
            Condition: used, overhauled

            Specification: Rolling mill 500 x 1500 mm - second-hand

            - Manufacturer: Meccaniche Moderne;
            - Cylinder diameter: about 500 mm;
            - Cylinder length: about 1500 mm;
            - Model: monoblock model - motor placed under cylinders;
            - Friction ratio between cylinders;
            - Cored cylinders with central chamber for water cooling;
            - the upper edge of rolls is about 1550/1580 mm
            - Cylinders equipped to new rotary joints - brand MAIER - for water cooling;
            - Cylinders mounted on bronze bushings with forced oil lubrication by pump;
            - New hydraulic nip adjustments;
            - New hydraulic unit;
            - Tipper guiding plates in steel material;
            - Safety bi-directional belly bars;
            - New safety brake for emergency stop;
            - AC Engine: 110 kW - 400 Volt - 50 Hz;
            - New mill tray in stainless steel material - to contain the compound;
            - Painting (with color RAL in according to your specifications);
            - New electric cabinet with PLC system Siemens S7-1200;
            - N.1 new control panel;
            - New on-board machine system;
            - Safety guards for current standards in compliance to EN 1417:3.2015;
            Renovated and guaranteed machine with CE marking and user and maintenance
            CE manual in German language

            Additional options:
            - New frequency inverter for 110 kW
            - New engine 110 kW
            - Strip cutting unit
            - Stockblender - used, overhauled
          Datasheet
          Request / Contact
          used Mixing Mixing mill ITALMEC Monoblock 350x700


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A200701 · Mixing mill

          ITALMEC - Monoblock 350x700 - - n.b. -

          Technical details
          roll diameter 350 mm︱roll length 700 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch 0︱total power requirement 22 kW︱
          Condition: used, reconditioned Specification: Roll mill 400 x 1000 mm - used Monobloc model - motor placer under cylinders - roller diameter: 350 mm - roller length: 700 mm - Rollers: with core bore, with central chamber for Water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new slewing rings for connection to the Water cycle - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - tilting guide plates - Roller container new, made of stainless steel, for receiving mixture - bi-directional bars - Safety brake for emergency stop - AC motor: 22 KW - 400 Volt - 50 Hz - New frequency converter system for variable speed of the rollers - Painting: in RAL colours according to customer's request - new control panel with touch panel Siemens KTP400 Basic - Display for gap between cylinders and machine speed - new electrical control cabinet with SPS system, Siemens S7-1200 - new machine cabling - Safety devices according to current EN 1417:3/2015 overhauled, 1 year warranty, with CE marking and operating and Maintenance instructions in German or English
            roll diameter 350 mm
            roll length 700 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch 0
            total power requirement 22 kW
            Description :
            Condition: used, reconditioned

            Specification: Roll mill 400 x 1000 mm - used
            Monobloc model - motor placer under cylinders

            - roller diameter: 350 mm
            - roller length: 700 mm
            - Rollers: with core bore, with central chamber for
            Water cooling
            - Fixed friction between the rollers
            - Rollers mounted on bronze bushes with circulating oil lubrication via pump,
            - equipped with new slewing rings for connection to the
            Water cycle
            - Gap adjustment: hydraulic, NEW
            - Hydraulic unit NEW
            - tilting guide plates
            - Roller container new, made of stainless steel, for receiving mixture
            - bi-directional bars
            - Safety brake for emergency stop
            - AC motor: 22 KW - 400 Volt - 50 Hz
            - New frequency converter system for variable speed of the rollers
            - Painting: in RAL colours according to customer's request
            - new control panel with touch panel Siemens KTP400 Basic
            - Display for gap between cylinders and machine speed
            - new electrical control cabinet with SPS system, Siemens S7-1200
            - new machine cabling
            - Safety devices according to current EN 1417:3/2015

            overhauled, 1 year warranty, with CE marking and operating and
            Maintenance instructions in German or English


          Datasheet
          Request / Contact
          used Mixing Mixing mill Walzwerk Labor 250x500


          • MEB Maschinenhandel GmbH
          • Schwalbenweg 4
          • 30826 Garbsen
          • Deutschland

          • (0)5031 9394-634
          • info@meb-maschinenhandel.de
            www.meb-maschinenhandel.de
          #2037-A200702 · Mixing mill

          Walzwerk - Labor 250x500 - - -

          Technical details
          roll diameter 250 mm︱roll length 500 mm︱rolls drilled Kernbohrung ︱Nip adjustment hydraulisch ︱total power requirement 2x 5,5 kW︱
            roll diameter 250 mm
            roll length 500 mm
            rolls drilled Kernbohrung
            Nip adjustment hydraulisch
            total power requirement 2x 5,5 kW
            Description :

          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •