Miscellaneous

machine measurements 3.230 x 1.200 x 1.780 mm︱machine weight - kg︱power capacity ca. 4,4 kW︱

---

Condition: used, Specification: Stollen trigger for triggering Tubes, hoses and profiles Chain haul-off with profile studs and haul-off chain. - Contact length approx.: 2,000 mm - Width of the cleats approx.: 150 mm - motor adjustable: 2.300 -230 rpm - Engine (Piller) Power approx.: 6 PS - Gearbox: CAVEX Flender Input 2,200 rpm, output 11 rpm - Drive to gear via V-belt - Drive gear to caterpillar: via double chain and spur gears - Lifting of the caterpillar belts via pneumatic cylinders - Compressed air: 6-7 bar - Machine dimensions L/W/H approx.: 3,230 x 1,200 x 1,780 mm

machine measurements 2.430 x 1.110 x 2.360 mm︱machine weight -- kg︱power capacity 2,2 kW︱

---

Condition: used Specification: 3-chamber baler, type: 8020 E.F.G. The baler is suitable for simultaneous pressing of paper, cardboard, foils & cans at the same time. The machine works automatically after starting. The plunger is moved manually over the chambers. The third chamber is currently in storage, but can be added without be added without any effort. - Press force: 20 t - Cycle time: 25 - 30 sec - Engine power: 2.2 kW - Total length with 2 chambers: 2,430 mm - Total length with 3 chambers: 3,650 mm - Total width: 1,110 mm - Total height: 2,360 mm - Voltage: 400 V, 50 Hz Bale dimensions L/W/H approx.: 1,100 x 800 x 800 mm Bale weight approx.: 200 - 220 kg The bales are tied with tied with 4 straps. Documentation in German, consisting of: - detailed spare parts list - maintenance instructions - circuit diagram: Electrical and hydraulic diagram Stage with ladder and handrail

machine measurements 2500 x 2000 x 3800 mm︱machine weight 1500 kg︱power capacity 10 kW︱

---

machine measurements -- mm︱machine weight -- kg︱power capacity -- kW︱

---

machine measurements ca. 1.300 x 1.200 x 1.850 mm︱machine weight ca. 600 kg︱power capacity -- kW︱

---

machine measurements 2.250 x 1.300 x 1.600 mm︱machine weight 1.600 kg︱power capacity -- kW︱

---

condition: used Specification: Washing machine for rubber parts - outdated in the year: 1990 - Drum diameter: 750 mm - drum length: 1500 mm - Number of chambers: 2, each 750 mm long - drum volume approx.: 660 litres - heating: not available - Drum speed approx.: 40 rpm - Program control: Fiber Multi Program Center EL 6 - Circuit diagram / machine documents: available - Dimensions: 2.250 x 1.300 x 1.600 mm - Weight approx.: 1.600 kg Remark: drain valve not available

machine measurements 1.800 x 1.300 x 1.600 mm︱machine weight 1.200 kg︱power capacity -- kW︱

---

machine measurements -- mm︱machine weight 240 kg︱power capacity 1,1 kW︱

---

machine measurements -- mm︱machine weight 1825 kg︱power capacity -- kW︱

---

Condition: used, unused Specification: Coating machine for adhesion promoter The automatic coating machine is suitable to coat metal and plastic parts parts with bonding agent or similar and to dry or warm up these parts to dry or heat up these parts for the following process. - intermittent conveyor chain - automatic coating - with subsequent drying - exchangeable adapters to hold the parts on the chain Technical data: - Year of manufacture: 2019 as new, no production, only test run - heating temperature max.: 150°C - Mains voltage: 3x 400V, 50Hz - Supply voltage: 230V, 50Hz - Control voltage: 24V - Compressed air: 6 bar - Weight: 1,850 kg

machine measurements 940 x 630 x 1.422 mm︱machine weight 682 kg︱power capacity -- kW︱

---

Condition: used, Specification: drum blast machine - dimensions W/D/H: 940 x 630 x 1.422 mm - working area: 2.400 x 3.000 mm - weight approx.: 682 kg - Media Plastic cryogenic: 0.38, 0.5; 0.76; 1.14; 1.52 mm - Compressed air: 5.5 - 6.9 bar 80 - 100 PSI - Working range up to approx.: -130°C - Operating voltage: 3x 460V, 60Hz, 60A 3x 380V, 60Hz, 60A - Control voltage: Siemens PLC with programme memory,

machine measurements 3200x1700x2100 mm︱machine weight -- kg︱power capacity -- kW︱

---

Condition: used Specification: Ultrasonic cleaning system type: Fisa 3VSD 150D - ultrasonic cleaning system consisting of: (see description) 1. tub 1 - cleaning agent 2. tub 2 - tap water 3. tub 3 - preservative 4. cleaning area 5. control - Cleaning cycle in tub 1 approx. 10-20 minutes - Operating temperature between 70-75°C - Extraction ON during cleaning process (Extraction fans are not are not included in the scope of delivery. - Cleaning with water in tub 2 - Cycle time in tub 2 approx. 10-20 minutes - Preservation in tub 3 - Preservation cycle time in tub 3 approx. 10 minutes - Blowing off the parts in the cleaning area under suction - incl. two cleaning baskets - The motors for the suction system in tub 1 and in the cleaning area are not included in the scope of delivery.

machine measurements 1.300 x 1.600 x 440 mm︱machine weight - kg︱power capacity ca. 2 kW︱

---

machine measurements 1.300 x 1.600 x 440 mm︱machine weight - kg︱power capacity ca. 2 kW︱

---

machine measurements -- mm︱machine weight -- kg︱power capacity 1,1 kW︱

---

machine measurements 2.900 x 700 x 1.700 mm︱machine weight 400 kg︱power capacity 2,5 kW︱

---

machine measurements 1800 x 2300 x 2300 mm︱machine weight 1800 kg︱power capacity -- kW︱

---

Condition: used, Specification: drum blasting unit - filling capacity: approx. 90 litres, approx. 1/3 filling with components possible. - dimensions W/D/H: 1.800 x 2.300 x 2.300 mm - Weight approx.: 1,800 kg - Granulate filling: approx. 30 kg - Compressed air: 4-6 bar - Working range down to approx.: -60°C - Operating voltage: 400V, 50Hz, 25A - Control voltage: 24 VDC,

machine measurements 2.000 x 1.300 x 1.800 mm︱machine weight 1.500 kg︱power capacity ca. 2,2 kW︱

---

machine measurements 1.500 x 2.000 x 2.100 mm︱machine weight 800 kg︱power capacity 35 kW︱

---

Condition: used deep-cold blasting machine, Specification: drum-type shot blast machine for embrittlement with simultaneous rolling of the parts and blasting with plastic abrasive. - Batch volume/ Filling quantity approx.: 1-20 litres, depending on article - Drum diameter: 300 mm x 500 mm deep - Part dimensions: from 1 mm to 80 mm - Carcass system W/D/H approx.: 2,000 x 1,500 x 2,100 mm - Weight approx.: 800 kg - All drives outside the refrigeration area - Centrifugal wheel power: 3 kW - Spinning wheel directly driven - PLC control S7 with operator panel - Mains voltage: 3x 400 V, 50 Hz - Fuse protection: 35 A - Control voltage: 24 VDC - Compressed air max.: 6 bar - Compressed air: dry, unlubricated, filtered - Nitrogen connection approx.: 4-6 bar - Nitrogen: liquid nitrogen N² - Working range up to approx.: -150°C, briefly up to -170C°. - Exhaust air ducting via cyclone separator - Processing time per batch: 4-6 minutes (depending on temperature and article) A second, identical unit built in 2009 is available. In addition, an EEP high-pressure washing/drying system type W20 is available as an option.

machine measurements H/B/T 630x418x325 mm︱machine weight 30,3 kg︱power capacity 240V, 50/60 Hz, 0,1 kW︱

---

machine measurements 1.520 x 1.200 x 1.800 mm︱machine weight 800 kg︱power capacity 45 kW︱

---

Condition: used Specification: high pressure washing/drying unit for rubber parts - usable drums: from blasting unit EEP model E20 - drum diameter: 300 mm - drum length: 400 mm - Drive power of drum: 4 kW - Medium pressure blast motor for drying the parts - Blast motor power: 1.5 kW - High-pressure water pump: 4.5 kW - Boiler Vailland: 35 kW - Water flow/time: 22 l/min - Part dimensions: from 3 mm to 100 mm - Programme control with various autom. programmes - Operating instructions: available - Mains voltage: 3x 400V, 50 Hz - Control voltage: 24 VDC Fuse protection: 35 A - Dimensions LxWxH: 1.520 x 1.200 x 1.800 mm - Weight approx.: 800 kg Two EEP drum blasting machines E20 are available. These complete the work step. Deburring of moulded parts and subsequently washed and dried on the W20, using using the same drums, without repackaging in one operation. Blasting time and washing with drying time, each approx. 10-15 minutes

machine measurements 1.500 x 2.000 x 2.100 mm︱machine weight 800 kg︱power capacity 35 kW︱

---

Condition: used deep-cold blasting machine, Specification: drum-type shot blast machine for embrittlement with simultaneous rolling of the parts and blasting with plastic abrasive. - Batch volume/ Filling quantity approx.: 1-20 litres, depending on article - Drum diameter: 300 mm x 500 mm deep - Part dimensions: from 1 mm to 80 mm - Carcass system W/D/H approx.: 2,000 x 1,500 x 2,100 mm - Weight approx.: 800 kg - All drives outside the refrigeration area - Centrifugal wheel power: 3 kW - Spinning wheel directly driven - PLC control S7 with operator panel - Mains voltage: 3x 400 V, 50 Hz - Fuse protection: 35 A - Control voltage: 24 VDC - Compressed air max.: 6 bar - Compressed air: dry, unlubricated, filtered - Nitrogen connection approx.: 4-6 bar - Nitrogen: liquid nitrogen N² - Working range up to approx.: -150°C, briefly up to -170C°. - Exhaust air ducting via cyclone separator - Processing time per batch: 4-6 minutes (depending on temperature and article) A second identical unit, built in 2011, is available. In addition, an EEP high-pressure washing/drying system Typ W20 is is available as an option.

machine measurements 3.000 x 700 x 2.000 mm︱machine weight 250 kg︱power capacity 0,37 kW︱

---

machine measurements -- mm︱machine weight -- kg︱power capacity 189 kW︱

---

Condition: used Specification: convection oven - Air circulation oven type ELIOG Kelvitherm / KUV 250/25-25-25, technical data: - inner dimensions: 2.500 x 2.500 x 2.500 mm - Temperature: max. 250°C - Temperature adjustable via programme controller - Door: single-leaf door - Electrical heating: 189 KW - Control system: EUROTHERM - with CE - Weight approx.: 3000 kg

machine measurements 2400x1900x2400 mm︱machine weight 1600 kg︱power capacity -- kW︱

---

Condition: used Specification: Heating furnace - Heating furnace type RV 32/S, Technical data: - Interior dimensions: 1.250 x 1.500 x 1.900 mm - room volume approx.: 3,23 m³ - Temperature max.: 50 - 200°C - Temperature adjustable via programme controller - Door: single-leaf door - Electrical heating: 24 kW - Motors: 0,74 kW - Voltage: 3x 400V, 50 Hz - Dimensions L/W/H approx.: 2,400 x 1,900 x 2,400 mm - Weight approx.: 1600 kg Three identical units are available.