Injection-moulding machines (plastic)

clamping force -- kN︱injection volume -- cm³︱screw diameter -- mm︱

---

Condition: used, specification: conveyor control/material station for 4 up to 56 separators for granulate- Conveying for plastic injection moulding machine, Description: The conveyor system control SM-SPS enables in cooperation with material separators and blowers to feed up to 56 processing machines or material processing machines or material take-off points with one or more materials. several materials. Technical data: - PLC control: Siemens S7-300 - Colour touch panel: SPS4: 6" panel - The control system is designed to control the following components: - 4 -56 separators (also units equipped with level probes and filter cleaning filter cleaning) - Control of the blower or a VAkuumpump - Control of the blower relief valve - Control of a safety filter - Control of empty suction valves - Material recognition via plug, scanner or empty suction valves For further technical data, see excerpt from the operating instructions. Overall scope: - Conveyor system control - Material station with accessories (see pictures/description in the appendix) - Dryer + other accessories (see pictures) - Voltage: 3x 400V, 50/60Hz, N, PE - Control voltage: 24V DC

clamping force 4200 kN︱injection volume 1212 /292 cm³︱screw diameter 70 /15 mm︱platen size 1200 x 1100 mm︱

---

Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG Multi 420/810-2300h/430 incl. handling injection unit 1: - Screw diameter: 70 mm - injection volume: 1.112 cm³ - weight: 880 g injection unit 2: - Screw diameter: 15 mm - injection volume: 292 cm³ - weight: 190 g Clamping unit: - Clamping force: 1200 kN - Centring: 160 mm - Platen size: 1200 x 1100 mm - Mould size: 810 x 710 mm - Mould thickness min.: 380 mm - Mould thickness max.: 940 mm - 4 & 4 Cascades - 4x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 192 kW - Dimensions L/W/H: approx. 7,900 x 2,200 x 5,000 mm - Weight approx.: 25,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.

clamping force 600 kN︱injection volume 106 cm³︱screw diameter 30 mm︱platen size 590 x 600 mm︱

---

Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in production and will be available from approx. available.

clamping force 1.300 kN︱injection volume 106 / 43 cm³︱screw diameter 30 / 25 mm︱platen size 850 x 750 mm︱daylight between platens - max. 900 mm︱

---

clamping force 800 kN︱injection volume 106 / 42 cm³︱screw diameter 30 / 22 mm︱platen size 600 x 600 mm︱

---

Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 30 mm - injection volume: 106 cm³ - weight: 94 g injection unit 2: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 600 x 600 mm - Mould size: 420 x 420 mm - Mould thickness min.: 250 mm - Mould thickness max.: 590 mm - Voltage: 3x 400V, 50Hz, N, PE - Total power: 42 kW - Dimensions L/W/H: approx. 4,300 x 1,400 x 3,600 mm - Weight approx.: 5,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.

clamping force 250 kN︱injection volume 38 cm³︱screw diameter 22 mm︱platen size 470 x 280 mm︱daylight between platens - max. 480 mm︱

---

clamping force 1.000 kN︱injection volume 203 cm³︱screw diameter 40 mm︱platen size 580 x 652 mm︱

---

Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.

clamping force 800 kN︱injection volume 177 cm³︱screw diameter 35 mm︱platen size 580 x 580 mm︱

---

Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant is still in production and will be available from approx. available.

clamping force -- kN︱injection volume 230 cm³︱screw diameter 40 mm︱platen size 475 x 475 mm︱

---

Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - Cylinder diameter: 40 mm - Spraying volume: 230 cm³. Clamping unit: - tie bar distance: 475 x 475 mm - Operating hours approx.: 30000 h - Air valve - Core pull - 12-way hot runner controller

clamping force 6500 kN︱injection volume 2011 / 323 cm³︱screw diameter 80 / 45 mm︱platen size 1450 x 1350 mm︱

---

Condition: used, Specification: Horizontal 2K-injection moulding machine, DEMAG ergotech 650-5200-610 incl. handling injection unit 1: - Screw diameter: 80 mm - injection volume: 2.011 cm³ - weight: 1810 g injection unit 2: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 6500 kN - Centring: 200 mm - Platen size: 1450 x 1350 mm - Mould size: 1000 x 910 mm - Mould thickness min.: 450 mm - Mould thickness max.: 950 mm - 2x core pull - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE - Total power: 245 kW - Dimensions L/W/H: approx. 10,100 x 5,500 x 5,000 mm - Weight approx.: 36,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.

clamping force 1500 kN︱injection volume 323 cm³︱screw diameter 45 mm︱platen size 690 x 660 mm︱

---

Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 45 mm - injection volume: 323 cm³ - weight: 290 g Clamping unit: - Clamping force: 1,500 kN - Centring: 125 mm - Platen size: 690 x 660 mm - Mould size: 475 x 475 mm - Mould thickness min.: 230 mm - Mould thickness max.: 460 mm - Handling: Yes - Voltage: 3x 400V, 50Hz, N, PE, 63A - Heating: 22 A - Motors: 41 A - Total power: 27 kW - Dimensions L/W/H: approx. 6,500 x 1,600 x 2,500 mm - Weight approx.: 9,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.

clamping force 2.750 kN︱injection volume 735 cm³︱screw diameter 60 mm︱platen size 1.050 x 900 mm︱daylight between platens - max. 850 mm︱

---

clamping force 250 kN︱injection volume 42 cm³︱screw diameter 22 mm︱platen size 420 x 455 mm︱

---

Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 22 mm - injection volume: 42 cm³ - weight: 37 g Clamping unit: - Clamping force: 250 kN - Centring: 110 mm - Platen size: 420 x 455 mm - Mould size: 280 x 280 mm - Mould thickness min.: 160 mm - Mould thickness max.: 475 mm - Ejector/picker: Yes - Voltage: 3x 400V, 50Hz, N, PE, 36A - Total power: 16 kW - Dimensions L/W/H: approx. 3,100 x 1,050 x 1,670 mm - Weight approx.: 2,000 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.

clamping force 800 kN︱injection volume 231 cm³︱screw diameter 40 mm︱platen size 580 x 652 mm︱

---

Condition: used, Specification: Horizontal injection moulding machine, injection unit: - Screw diameter: 40 mm - injection volume: 231 cm³ - weight: 205 g Clamping unit: - Clamping force: 800 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 450 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - Ejector/picker: Yes - Voltage: 3x 400V, 50Hz, N, PE, 70A - Total power: 28 kW - Dimensions L/W/H: approx. 3,300 x 1,400 x 1,800 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage.

clamping force 2.500 kN︱injection volume 392 cm³︱screw diameter 50 mm︱platen size 1.150 x 905 mm︱daylight between platens - max. 1.200 mm︱

---

Condition: used, Specification: Horizontal injection moulding machine, Factory No.: 30883 Injection unit 1: - Screw diameter: 50 mm - Dosing stroke: 200 mm - Screw speed: 240 rpm - Injection flow: 291 cm³/sec - Injection volume: 392 cm³ - Injection weight: 353 g - Special injection pressure: 1,430 bar - Special injection pressure increased: 1,900 bar - Nozzle path: 650 mm - Heating capacity: 15,3 kW - Number of heating zones incl. nozzle: 5 Injection unit 2: - Screw diameter: 25 mm - Dosing stroke: 140 mm - Screw speed: 480 rpm - Injection flow: 88 cm³/sec - Injection volume: 69 cm³ - Injection weight: 61 g - Special injection pressure: 2,000 bar - Special injection pressure increased: 2,400 bar - Heating capacity: 6,6 kW - Number of heating zones incl. nozzle: 6 Clamping unit: - Clamping force max.: 2,500 kN - Mounting plates BAP: 1,150 x 905 mm HL - FAP clamping plates: 1,150 x 1,030 mm - Opening stroke: 850 mm - Distance between plates max.: 1,200 mm - Ejector travel: 200 mm - Ejector force: 83.0 kN Drive: - Pump drive power: 45 kW - Operating hours: 92680 hours Handling: ERC 63/1C integrated

clamping force 250 kN︱injection volume 38 cm³︱screw diameter 22 mm︱platen size 470 x 280 mm︱

---

Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 22 mm - Screw length L/D: 18.2 - Spray volume: 38 cm³ - Shot weight max.: 35 g - Special spraying pressure: 1.500 bar - Special injection pressure increased: 2,050 bar Clamping unit: - Max. clamping force: 250 kN - clamping plates: 470 x 280 mm - Opening path: 330 mm - mould installation height: 150 mm - max. plate distance: 480 mm - Connected load: 16 kW - Weight: 1.800 Kg Machine is under power. Condition: maintained, without funnel - Control CC90 - 1x core puller - 1x air valve

clamping force 1.750 kN︱injection volume 318 cm³︱screw diameter 45 mm︱platen size 700 x 700 mm︱daylight between platens - max. 460 mm︱

---

Condition: used, Specification: Horizontal injection moulding machine, Injection unit: - Screw diameter: 45 mm - Screw length L/D: 20 - Spray volume: 318 cm³ - Shot weight max.: 287 g - Special spraying pressure: 2,100 bar Clamping unit: - Max. clamping force: 1,750 kN - clamping plates: 700 x 700 mm - Opening path max.: 460 mm - mould installation height: 150 mm - Operating hours: 89217 h - 1x core puller - Handling / Robots: ENGEL

clamping force 500 kN︱injection volume -- cm³︱screw diameter 25 mm︱platen size 400 x 400 mm︱

---

Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg

clamping force 4200 kN︱injection volume 572 - 1716 cm³︱screw diameter 90 mm︱platen size 1040 x 1040 mm︱closing stroke 620 mm︱

---

clamping force 500 kN︱injection volume -- cm³︱screw diameter 30 mm︱platen size 400 x 400 mm︱

---

Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 30 mm - shot volume max.: -- cm³ - injection pressure approx.: 1150 bar - heating zones: 4 - Heating power: 5,56 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 20,6 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.850 kg

clamping force 500 kN︱injection volume -- cm³︱screw diameter 30 mm︱platen size 400 x 400 mm︱

---

Condition: used, Specification: horizontal injection molding machine, - used, Defect injection unit: - Screw diameter: 30 mm - shot volume max.: -- cm³ - injection pressure approx.: 1150 bar - heating zones: 4 - Heating power: 5,56 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 20,6 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.850 kg System is not functional. CPU card does not control the screen. (As spare parts storage)

clamping force 500 kN︱injection volume -- cm³︱screw diameter 30 mm︱platen size 400 x 400 mm︱

---

Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 30 mm - shot volume max.: -- cm³ - injection pressure approx.: 1150 bar - heating zones: 4 - Heating power: 5,56 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 20,6 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.850 kg

clamping force 700 kN︱injection volume 103 cm³︱screw diameter 30 mm︱platen size 432 x 310 mm︱closing stroke 650 mm︱

---

clamping force 2000 kN︱injection volume 251 cm³︱screw diameter 40 mm︱platen size 1.050 x 900 mm︱daylight between platens - max. 880 mm︱

---

Condition: used, very good condition Specification: Vertical injection moulding machine, with rotary table injection unit: - screw diameter: 40 mm - injection volume: 251 cm³ - Injection flow: 244 cm³/sec - Spec. injection pressure: 1,300 bar - Spec. injection pressure increased: 2,020 bar - Nozzle stroke: 500 mm - Nozzle pressure: 51.9 kN Clamping unit: - Clamping force max.: 2,000 kN - Clamping platens hor. x vert. 820 x 459 mm - Max. platen distance: 880 mm - Opening stroke: 400 mm - Mould installation height: 480 mm - Ejector stroke: 105 mm Number of heating zones incl. nozzle: 4 - Heating power: 9.3 kW - Weight clamping unit: 11,000 kg - Weight injection unit: 3.500 kg - Weight total: 14.500 kg - Operating hours approx.: 643 hours