Cutting machines

cross-section width: 800 mm︱cross-section heigth: 15 mm︱feed: ab ca. 5 mm︱speed of feed: m/min︱cuts max.: Schnitte/m︱

---

condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards; - New on-board system machine; - New control cabinet with PLC system Siemens S7-1200; - CE marking; - Instructions for use and maintenance in English or German language

cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱

---

cross-section width: 90 mm︱cross-section heigth: 35 mm︱feed: 1.600 mm︱

---

cross-section width: 100 mm︱cross-section heigth: 50 mm︱feed: 10 - 999.999,9 mm︱speed of feed: 1 - 50 m/min︱

---

cross-section width: -- mm︱cross-section heigth: -- mm︱feed: -- mm︱speed of feed: 0,4 - 20 m/min︱

---

cross-section width: 16 mm︱cross-section heigth: 16 mm︱feed: - mm︱speed of feed: 60 m/min︱cuts max.: - Schnitte/m︱

---

cross-section width: 5 Schläuche 3-5 mm︱cross-section heigth: 3 - 20 mm︱feed: 1,5 - 50 mm︱

---

Condition: used, very good condition only approx. 1 year in production Specification: circular knife cutting machine for slices and rings - small cutting machine with high-speed rotating circular knife - feed and knife movement, pneumatic - Tube or strand diameter min.: 3 mm - Tube or strand diameter min.: 20 mm - Feed (ring or strand length): 1.5 - 50 mm - Output depending on material max.: 60 strokes/min - Optionally, the following can be cut 5 tubes or strands: diameter 3 mm to 5 mm 4 tubes or strands: diameter 5 mm to 7 mm 3 hoses or strands: diameter 7 mm to 12 mm 2 hoses or strands: diameter 12 mm to 15 mm 1 hose or string: diameter 15 mm to 20 mm - Power requirement approx.: 0.37 kW - Air supply min.: 5 bar - Operating voltage: 3x 400V, 50Hz, N, PE - Paint finish: RAL 6011 reseda green - Weight approx.: 160 kg

cross-section width: 1.550 mm︱cross-section heigth: 100 mm︱feed: 10 - 1.500 mm︱

---

Condition: used, Specification: Cross cutting machine for panels Model POLAR 155 EMC-MONITOR - Working width: 1,550 mm - Insert height approx.: 165 mm depending on material - insertion depth: 1,550 mm - feed: 10 - 1.500 mm - Main drive power: 5,5 KW - Width without storage table: 2,790 mm with storage tables: 3,550 mm - depth: 2,950 mm - height: 1.730 mm - front table length: 750 mm - table height: 900 mm - Weight: 4.120 kg - Pressing pressure min.: 150 kp max.: 4.500 kp - knife thickness: 137,5 mm - Feed speed slow / fast: 2.7 / 15.8 cm/sec.

cross-section width: 80 mm︱cross-section heigth: 45 mm︱feed: 1 - 999.000 mm︱speed of feed: 60 m/min︱cuts max.: 60 Schnitte/m︱

---

Condition: used Specification: cutting machine for cutting steel reinforced, rigid and felxible rubber profiles, rigid and flexible rubber, sponge rubber as well as hard and soft PVC profile - used - two circular knife cutting units - one adjustable fixed and one travelling cutting unit - belt width approx.: 80 mm - cutting height approx.: 45 mm - max. blade diameter: 275 mm - Knife speed infinitely variable: 1,000 - 5,000 rpm - Knife direction: left - right run - Circular blade drive AC motor: 3 kW - Frequency converter for knife drive: 5.5 kW - Knife stroke adjustable - Electrical connection: 3x400V, 50Hz, N, PE - Control voltage: 230VAC/24VDC/5VDC - Max. Back-up fuse: 32 A - Power consumption: 14 KW - Control Siemens, touch panel 12", with recipe management - Pressure min.: 5 bar - Painting: RAL 6011 - Dimensions L/W/H approx.: 7,600 x 1,900 x 2,800 mm - Weight approx.: 3,800 kg - Direction of material flow from right to left Sag control stepless control of the feed as an option

speed of feed: 40 m/min︱feed: 1 - 99.999,9 mm︱cuts max.: 200 Schnitte/m︱cross-section width: 130 mm︱cross-section heigth: 15 mm︱

---

cross-section width: 85 mm︱cross-section heigth: 25 - 40 mm︱feed: 1 - 999,999,9 mm︱speed of feed: 60 m/min︱cuts max.: 100 - 120 Schnitte/m︱

---