European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Plum & Partner Werkzeugmaschinen GmbH - Stockist for used machines

          Machinelist:


          Center Lathe

          used  Center Lathe OPTIMUM OptiTurn TH 3610


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12309 · Center Lathe

          OPTIMUM - OptiTurn TH 3610 - - 2018 / Demo -

          Technical details
          turning diameter over bed 356 mm︱turning diameter over slide rest 225 mm︱turning length 980 mm︱centre height 180 mm︱bed width 187 mm︱speeds 8: 70 - 2000 U/min︱quill stroke 120 mm︱total power requirement 1,5 kW︱diameter of quill 42 mm︱spindle bore 52 mm︱feeds - longitudinal 32: 0,052 - 1,392 mm/min︱feeds - cross 32: 0,014 - 0,38 mm/min︱weight of the machine ca. 570 kg︱dimensions of the machine ca. 1,95 x 0,73 x 1,35 m︱Electric 400 Volt ︱3 jaw chuck 200 mm︱Multifix-steel holder SWH 3 E ︱Applications for rapid transfer steel-holder 3 ︱Food - Stop ︱Chuck protection geschaltet
          Universal lathe make Optimum, Mod, OptiTurn TH 3610, year 2018 with ONLY approx. 20 operating hours on original pallet. Purpose of use no longer applies, that's why the machine is sold. Machine dealer with own stock of 1600 m².
            turning diameter over bed 356 mm
            turning diameter over slide rest 225 mm
            turning length 980 mm
            centre height 180 mm
            bed width 187 mm
            speeds 8: 70 - 2000 U/min
            quill stroke 120 mm
            total power requirement 1,5 kW
            diameter of quill 42 mm
            spindle bore 52 mm
            feeds - longitudinal 32: 0,052 - 1,392 mm/min
            feeds - cross 32: 0,014 - 0,38 mm/min
            weight of the machine ca. 570 kg
            dimensions of the machine ca. 1,95 x 0,73 x 1,35 m
            3 jaw chuck 200 mm
            Multifix-steel holder SWH 3 E
            Applications for rapid transfer . 3
            Chuck protection geschaltet
            Description :
            Universal lathe make Optimum, Mod, OptiTurn TH 3610, year 2018 with ONLY approx.
            20 operating hours on original pallet. Purpose of use no longer applies, that's
            why the machine is sold.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Center Lathe MATRA MD 25


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12316 · Center Lathe

          MATRA - MD 25 - - 1983 -

          Technical details
          turning diameter over bed 500 mm︱turning diameter over slide rest 300 mm︱turning length 1000 mm︱turning dia. in gap 690 mm︱speeds 16 / 11 - 2000 U/min︱spindle bore 80 mm︱spindle head DIN 55022 Gr. 8 ︱feed longitudinal 52 / 0,04 - 3 mm/U︱rapid traverse longitudinal 3800 mm/min︱rapid traverse cross 1900 m/min︱tailstock quill taper MT 5 ︱quill adjustment 200 mm︱total power requirement 7,5 kW︱weight of the machine ca. 2,8 t︱dimensions of the machine ca. 2,5 x 1 x 1,3 m︱Electric 380 Volt ︱3 jaw chuck Röhm 250 mm︱Set jaws for the chuck 2 x ︱Chuck protection ︱Faceplate 500 mm︱
          Universal lathe with hardened and ground bed guides, gap in bed with removable bridge, rapid support traverse, automatic traverse in the upper support, Turning diameter 500 mm, turning length 1000 mm. There are all common metric, inch and module gradients can be adjusted without changing the wheels. Oil lubrication with pump in the left foot of the bed lubricates the headstock and the feed gear. A new feed protection hood was retrofitted. She can still do electric be connected so that the machine does not run when the hood is open. Machine from maintenance department not production. Machine dealer with own stock of 1600 m²
            turning diameter over bed 500 mm
            turning diameter over slide rest 300 mm
            turning length 1000 mm
            turning dia. in gap 690 mm
            speeds 16 / 11 - 2000 U/min
            spindle bore 80 mm
            spindle head DIN 55022 Gr. 8
            feed longitudinal 52 / 0,04 - 3 mm/U
            rapid traverse longitudinal 3800 mm/min
            rapid traverse cross 1900 m/min
            tailstock quill taper MT 5
            quill adjustment 200 mm
            total power requirement 7,5 kW
            weight of the machine ca. 2,8 t
            dimensions of the machine ca. 2,5 x 1 x 1,3 m
            3 jaw chuck Röhm 250 mm
            Set jaws for the chuck 2 x
            Faceplate 500 mm
            Description :
            Universal lathe with hardened and ground bed guides, gap in bed with removable
            bridge, rapid support traverse, automatic traverse in the upper support,
            Turning diameter 500 mm, turning length 1000 mm. There are all common metric,
            inch and module gradients can be adjusted without changing the wheels. Oil
            lubrication with pump in the left foot of the bed lubricates the headstock and
            the feed gear. A new feed protection hood was retrofitted. She can still do
            electric be connected so that the machine does not run when the hood is open.
            Machine from maintenance department not production.
            Machine dealer with own stock of 1600 m²
          Datasheet
          Request / Contact
          used  Center Lathe MVE BAUART VDF MVE 280/wie VDF V5-2000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-10914 · Center Lathe

          MVE BAUART VDF - MVE 280/wie VDF V5-2000 - - -

          Technical details
          turning diameter over bed 590 mm︱turning diameter over slide rest 350 mm︱turning length 2000 mm︱centre height 280 mm︱bed width 490 mm︱spindle bore 81 mm︱spindle turning speed range 18, von 19-950 U/min︱total power requirement 11 kW︱weight of the machine ca. 4,8 t︱dimensions of the machine ca. 4,51 x 1,76 x 1,58 m︱Electric 380 Volt ︱3-jaw chuck Forkardt F 315 ︱Rapid transfer-steel holder with div. applications ︱Machinelight ︱Cooling equipment ︱Machinefeets ( 6 pieces ) ︱Following peak ︱Condition: ready for operation ︱Video available on our website.
          Universal lathe. Please notice that the MVE 280 is like the VDF V 5 x 2000. Guideways and spindles in good condition. Machine dealer with own stock of 1600 m².
            turning diameter over bed 590 mm
            turning diameter over slide rest 350 mm
            turning length 2000 mm
            centre height 280 mm
            bed width 490 mm
            spindle bore 81 mm
            spindle turning speed range 18, von 19-950 U/min
            total power requirement 11 kW
            weight of the machine ca. 4,8 t
            dimensions of the machine ca. 4,51 x 1,76 x 1,58 m
            Description :
            Universal lathe. Please notice that the MVE 280 is like the VDF V 5 x 2000.
            Guideways and spindles in good condition.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Center Lathe NARDINI MS 175 E / 800


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12258 · Center Lathe

          NARDINI - MS 175 E / 800 - - -

          Technical details
          turning diameter over bed 350 mm︱turning diameter over slide rest 200 mm︱turning length 800 mm︱spindle bore 46 mm︱spindle turning speed range 18: 25 - 2000 U/min︱spindle head Din 55027 Gr. 5 ︱total power requirement 4,4/2,2 kW︱weight of the machine ca. 800 kg︱dimensions of the machine ca. 2 x 1 x 1,8 m︱Electric 380 Volt ︱3 jaw chuck neu 160 mm︱Multifix-toolholder with tapers ︱Rear chip protect ︱Faceplate Röhm 310 mm︱Motor brake ︱Video available on our website. ︱Condition: ready for operation
          Universal lathe from the training area with new 3-jaw chuck, face plate and multifix holder. It was not heavily used, which can be seen from the little paint wear on the back wall. We ask interested private parties to refrain from making an inquiry, as it is a well-preserved professional machine and is therefore too expensive (+ VAT!) for hobby mechanics. Machine dealer with own stock of 1600 m².
            turning diameter over bed 350 mm
            turning diameter over slide rest 200 mm
            turning length 800 mm
            spindle bore 46 mm
            spindle turning speed range 18: 25 - 2000 U/min
            spindle head Din 55027 Gr. 5
            total power requirement 4,4/2,2 kW
            weight of the machine ca. 800 kg
            dimensions of the machine ca. 2 x 1 x 1,8 m
            3 jaw chuck neu 160 mm
            Faceplate Röhm 310 mm
            Description :
            Universal lathe from the training area with new 3-jaw chuck, face plate and
            multifix holder. It was not heavily used, which can be seen from the little
            paint wear on the back wall.
            We ask interested private parties to refrain from making an inquiry, as it is a
            well-preserved professional machine and is therefore too expensive (+ VAT!) for
            hobby mechanics.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Magnet-Drilling-Machine

          used  Magnet-Drilling-Machine BDS Maschinen MAB 485 SB


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09254 · Magnet-Drilling-Machine

          BDS Maschinen - MAB 485 SB - - 2016 -

          Technical details
          bore diameter 12 - 40 mm︱turning speeds 50 - 450 U/min︱Boring power 40 mm︱thread max. M16 ︱spindle cone MK2 ︱stroke 160 mm︱engine output 1150 W︱weight ca. 13 kg︱dimensions of the machine ca. 0,3 x 0,2 x 0,6 m︱Machine manual ︱electric 230 volt
            bore diameter 12 - 40 mm
            turning speeds 50 - 450 U/min
            Boring power 40 mm
            thread max. M16
            spindle cone MK2
            stroke 160 mm
            engine output 1150 W
            weight ca. 13 kg
            dimensions of the machine ca. 0,3 x 0,2 x 0,6 m
          Datasheet
          Request / Contact

          Pillar Drilling Machine

          used  Pillar Drilling Machine KAPEMA ZS 40H


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08411 · Pillar Drilling Machine

          KAPEMA - ZS 40H - - neu -

          Technical details
          bore capacity in steel (diameter) 40 mm︱throat 297 mm︱bore stroke 120 mm︱speeds 8 / 75 - 1600 U/min︱table-size 500 x 460 mm︱spindle taper MK 4 ︱column diameter 115 mm︱spindle feeds: 3 / 0,1 - 0,26 mm/U︱distance spindle /table 715 mm︱distance spindle/base plate 1180 mm︱engine output 1,5 kW︱table rotating 360 Grad︱weight of the machine ca. 335 kg︱dimensions of the machine ca. 0,5 x 0,76 x 1,89 m︱Electric 380 Volt ︱Cooling pump in machine base ︱Machinelight
          Heavy geared boring machine with digital display for speed and drilling depth, hardened gears, thick-walled column, large table and base plate with T-slots, motorized table adjustment, electromagnetic feed engagement by means of snaps on the control lever. Machine not much used from the demonstration area. Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 40 mm
            throat 297 mm
            bore stroke 120 mm
            speeds 8 / 75 - 1600 U/min
            table-size 500 x 460 mm
            spindle taper MK 4
            column diameter 115 mm
            spindle feeds: 3 / 0,1 - 0,26 mm/U
            distance spindle /table 715 mm
            distance spindle/base plate 1180 mm
            engine output 1,5 kW
            table rotating 360 Grad
            weight of the machine ca. 335 kg
            dimensions of the machine ca. 0,5 x 0,76 x 1,89 m
            Description :
            Heavy geared boring machine with digital display for speed and drilling depth,
            hardened gears, thick-walled column, large table and base plate with
            T-slots, motorized table adjustment, electromagnetic feed engagement
            by means of snaps on the control lever. Machine not much used from the
            demonstration area.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine KAPEMA BM 25


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-08416 · Pillar Drilling Machine

          KAPEMA - BM 25 - - fabrikneu / new -

          Technical details
          bore capacity in steel (diameter) 25 mm︱throat 255 mm︱bore stroke 135 mm︱spindle turning speed range 8, von 105-2900 U/min︱table-size 500 x 350 mm︱column diameter 100 mm︱spindle taper MK 3 ︱total power requirement 0,65 / 0,9 kW︱weight of the machine ca. 190 kg︱dimensions of the machine ca. 0,5 x 0,5 x 1,7 m︱Electric 380 Volt ︱Drill chuck
          New gear machine, 2-stage right/left rotation, height-adjustable drilling head, Construction principle "Arboga - Sweden", maintenance-free gearbox with helical teeth Wheels, drill head and table are adjustable 360 ??degrees around the column,chip protection with electr. Switch, drilling depth indicator, warranty = 12 months. Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 25 mm
            throat 255 mm
            bore stroke 135 mm
            spindle turning speed range 8, von 105-2900 U/min
            table-size 500 x 350 mm
            column diameter 100 mm
            spindle taper MK 3
            total power requirement 0,65 / 0,9 kW
            weight of the machine ca. 190 kg
            dimensions of the machine ca. 0,5 x 0,5 x 1,7 m
            Description :
            New gear machine, 2-stage right/left rotation, height-adjustable drilling head,
            Construction principle "Arboga - Sweden", maintenance-free gearbox with helical
            teeth Wheels, drill head and table are adjustable 360 ??degrees around the
            column,chip protection with electr. Switch, drilling depth indicator, warranty
            = 12 months.

            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Pillar Drilling Machine AUDAX 50 A


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11686 · Pillar Drilling Machine

          AUDAX - 50 A - - 1970 -

          Technical details
          bore capacity in steel (diameter) 50 mm︱throat 300 mm︱bore stroke 200 mm︱spindle taper MK 4 ︱spindle turning speed range 55 - 600 U/min︱table diameter 500 mm︱column diameter 180 mm︱feeds 0,07/0,11/0,16/0,22 mm/U︱total power requirement 1,47 / 1,84 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 1,3 x 0,65 x 2,17 m︱Electric 380 Volt ︱Condition: ready for operation
          Machine dealer with own stock of 1600 m².
            bore capacity in steel (diameter. 50 mm
            throat 300 mm
            bore stroke 200 mm
            spindle taper MK 4
            spindle turning speed range 55 - 600 U/min
            table diameter 500 mm
            column diameter 180 mm
            feeds 0,07/0,11/0,16/0,22 mm/U
            total power requirement 1,47 / 1,84 kW
            weight of the machine ca. 500 kg
            dimensions of the machine ca. 1,3 x 0,65 x 2,17 m
            Description :
            Machine dealer with own stock of 1600 m².
          1.950 €
          Datasheet
          Request / Contact

          milling machining centers - vertical

          used  milling machining centers - vertical STROJTOS VMC 40


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12110 · milling machining centers - vertical

          STROJTOS - VMC 40 - - 2003 - Heidenhain TNC 310

          Technical details
          x-travel 450 mm︱y-travel 400 mm︱z-travel 400 mm︱control Heidenhain TNC 310 ︱distance spindle nose and table min. 100 mm︱table height over floor 810 mm︱table surface area 400 x 900 mm︱no. of flutes 5 je 14 mm ︱work piece dimensions max. 450 x 400 x 300 mm︱workpiece weight max. 350 kg︱turning speeds: 9000 U/min︱power requirement 7,5 / 8,2 kW︱spindle cone ISO 40 DIN 69871 ︱spindle diameter in front bearing 60 mm︱tool numbers 12 ︱diameter of tools max. 80 mm︱tool length - max. 200 mm︱weight of tools max. 6 kg︱tool changing time 4 sec︱feed range x y z 1 - 20 000 mm/min.︱
          - INDRAMAT axis drives in X, Y, Z and S - SCHNEEBERGER roller guide - Cabin roof fixed - anchoring material - machine documentation You find a video on our homepage. Machine dealer with own stock of 1600 m²
            x-travel 450 mm
            y-travel 400 mm
            z-travel 400 mm
            control Heidenhain TNC 310
            distance spindle nose and table min. 100 mm
            table height over floor 810 mm
            table surface area 400 x 900 mm
            no. of flutes 5 je 14 mm
            work piece dimensions max. 450 x 400 x 300 mm
            workpiece weight max. 350 kg
            turning speeds: 9000 U/min
            power requirement 7,5 / 8,2 kW
            spindle cone ISO 40 DIN 69871
            spindle diameter in front bearin. 60 mm
            tool numbers 12
            diameter of tools max. 80 mm
            tool length - max. 200 mm
            weight of tools max. 6 kg
            tool changing time 4 sec
            feed range x y z 1 - 20 000 mm/min.
            Description :
            - INDRAMAT axis drives in X, Y, Z and S
            - SCHNEEBERGER roller guide
            - Cabin roof fixed
            - anchoring material
            - machine documentation
            You find a video on our homepage.
            Machine dealer with own stock of 1600 m²
          Datasheet
          Request / Contact

          Tool Room Milling Machine - Universal

          used  Tool Room Milling Machine - Universal KNUTH WF 1 / Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12307 · Tool Room Milling Machine - Universal

          KNUTH - WF 1 / Digi - - 1995 -

          Technical details
          x-travel 300 mm︱y-travel 200 mm︱z-travel 350 mm︱table surface area 700 x 270 mm︱taper in main spindle ISO 40 ︱turning speeds 8: 150 - 1660 U/min︱turning speed range - horizontal 8. 110 - 1230 U/min︱feeds 8: 25 - 285 mm/min︱weight 900 kg︱quill stroke 60 mm︱total power requirement 3,7 kW︱range L-W-H 1,3 x 1,38 x 1,65 m︱Electric 380 Volt ︱Cooloing pump ︱Digital readout 2 axis x+y / Digidata KNT 7000 ︱Fixed working table ︱Vertical milling head swivelling +quill adjustment ︱chip pan ︱Swiveling table 600 x 250 mm︱Slotting head Hub 80 mm︱
          Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine dealer with own stock of 1600 m².
            x-travel 300 mm
            y-travel 200 mm
            z-travel 350 mm
            table surface area 700 x 270 mm
            taper in main spindle ISO 40
            turning speeds 8: 150 - 1660 U/min
            turning speed range - horizontal 8. 110 - 1230 U/min
            feeds 8: 25 - 285 mm/min
            weight 900 kg
            quill stroke 60 mm
            total power requirement 3,7 kW
            range L-W-H 1,3 x 1,38 x 1,65 m
            Digital readout 2 axis x+y / Digidata KNT 7000
            Swiveling table 600 x 250 mm
            Slotting head Hub 80 mm
            Description :
            Universal tool milling machine with 2 axis digital display and swiveling
            vertical milling head with quill, fixed + swiveling table, slotting head,
            automatic feeds and rapid trverse in all three directions. Machine from a
            repair shop.
            The digital display shows 2 axes because the third axis display is defective.
            All three scales are OK and you can choose which of the 3 axes should be
            connected.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 1 Aktiv / TNC 113


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12186 · Tool Room Milling Machine - Universal

          DECKEL - FP 1 Aktiv / TNC 113 - - 1979 - Heidenhain TNC 113

          Technical details
          x-travel 300 mm︱y-travel 160 mm︱z-travel 340 mm︱spindle taper ISO 40 ︱spindle turning speed range 40 - 2000 U/min︱feeds -stepless- 5 - 500 mm/min︱rapid traverse 1200 mm/min︱creep feed 4 mm/min︱control Heidenhain TNC 113 ︱total power requirement 1,6/2 kW︱weight of the machine ca. 570 kg︱dimensions of the machine ca. 1,2 x 1 x 1,75 m︱Electric 380 Volt ︱Switch gear cabinet ( separate ) ︱Angle table ( fixed ) 600 x 210 mm︱Taper ︱Opposite bearing for horizontal milling unit ︱Bellows with slats of aluminium ︱Video available on our website. ︱Condition: ready for operation
          with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².
            x-travel 300 mm
            y-travel 160 mm
            z-travel 340 mm
            spindle taper ISO 40
            spindle turning speed range 40 - 2000 U/min
            feeds -stepless- 5 - 500 mm/min
            rapid traverse 1200 mm/min
            creep feed 4 mm/min
            control Heidenhain TNC 113
            total power requirement 1,6/2 kW
            weight of the machine ca. 570 kg
            dimensions of the machine ca. 1,2 x 1 x 1,75 m
            Angle table ( fixed ) 600 x 210 mm
            Description :
            with active digital display "Heidenhain TNC 113", for automatic retraction of
            preselected slide positions in absolute and incremental travel, autom. feeds
            stepless in x + z axis, sliding upper arm 100 mm.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          used  Tool Room Milling Machine - Universal DECKEL FP 2 Aktiv / TNC 113


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12280 · Tool Room Milling Machine - Universal

          DECKEL - FP 2 Aktiv / TNC 113 - - 1976 - Heidenhain TNC 113

          Technical details
          x-travel 400 mm︱y-travel 220 mm︱z-travel 400 mm︱spindle taper ISO 40 ︱spindle turning speed range 25 - 2500 U/min︱feeds -stepless- 5 - 500 mm/min︱rapid traverse 1200 mm/min︱creep feed 4 mm/min︱control Heidenhain TNC 113 ︱total power requirement 4,4 kW︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 1,6 x 1,2 x 1,8 m︱Electric 380 Volt ︱Switch gear cabinet ( separate ) ︱Angle table ( fixed ) 700 x 330 mm︱Taper diverse ︱Bellows with slats of aluminium ︱Protection cabin ︱bottom tray ︱Machinefeets
          with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².
            x-travel 400 mm
            y-travel 220 mm
            z-travel 400 mm
            spindle taper ISO 40
            spindle turning speed range 25 - 2500 U/min
            feeds -stepless- 5 - 500 mm/min
            rapid traverse 1200 mm/min
            creep feed 4 mm/min
            control Heidenhain TNC 113
            total power requirement 4,4 kW
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 1,6 x 1,2 x 1,8 m
            Angle table ( fixed ) 700 x 330 mm
            Taper diverse
            Description :
            with active digital display "Heidenhain TNC 113", for automatic retraction of
            preselected slide positions in absolute and incremental travel, autom. feeds
            stepless in x + z axis, sliding upper arm 100 mm.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          accessories for grinding machines

          used  accessories for grinding machines JUNG HA 20


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-10480 · accessories for grinding machines

          JUNG - HA 20 - - ungebraucht/unused -

          Technical details
          dimensions of the machine ca. 380 x 200 x 134 mm︱weight of the machine ca. 24 kg︱power requirement - kW︱baseplate-clamping range 110 x 70 mm︱workpiece sizes max. 56 x 70 x 25 mm︱profile depth max. 15 mm︱angular adjustment 0-2 °︱Electrik 24 Volt
          Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Machine dealer with own stock of 1600 m².
            dimensions of the machine ca. 380 x 200 x 134 mm
            weight of the machine ca. 24 kg
            power requirement - kW
            baseplate-clamping range 110 x 70 mm
            workpiece sizes max. 56 x 70 x 25 mm
            profile depth max. 15 mm
            angular adjustment 0-2 °
            Description :
            Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of
            a grinding machine for grinding pieces with angle. Detailed describtion see
            attached PDF. doc.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Double spindle mounted in journals

          used  Double spindle mounted in journals GREIF DV 3 -1-1


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12241 · Double spindle mounted in journals

          GREIF - DV 3 -1-1 - - -

          Technical details
          wheel diameter 300 mm︱speeds 1500 U/min︱Drive 1,5 kW︱grinding wheel size 300 x 40 x 30 mm︱weight of the machine ca. 250 kg︱range L-W-H 0,7 x 0,5 x 1,1 m︱Electric 380 Volt ︱Base ︱Suck away unit T-P ADT 12
          Robust bench grinder diameter 300 mm with hand rest and integrated vacumer. Machine dealer with own stock of 1600 m².
            wheel diameter 300 mm
            speeds 1500 U/min
            Drive 1,5 kW
            grinding wheel size 300 x 40 x 30 mm
            weight of the machine ca. 250 kg
            range L-W-H 0,7 x 0,5 x 1,1 m
            Suck away unit T-P ADT 12
            Description :
            Robust bench grinder diameter 300 mm with hand rest and integrated
            vacumer.
            Machine dealer with own stock of 1600 m².
          830 €
          Datasheet
          Request / Contact

          Jig Grinding Machine

          used  Jig Grinding Machine Moore No. 2c


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12165 · Jig Grinding Machine

          Moore - No. 2c - - 1975 -

          Technical details
          x-travel 420 mm︱y-travel 270 mm︱workpiece height - mm︱table-size 254 x 482 mm︱throat 254 / 318 mm︱grinding spindle speeds 12. - 60.000 U/min.︱spindle stroke 92 mm︱spindle turning speed range 90, 136, 184, 280 U/min︱number of strokes adjustable 2 - 120 Hübe bei 51 mm︱0 1,25 µm bei 30 mm︱Required air-pressure 7 bar︱weight of the machine ca. 1430 kg︱dimensions of the machine ca. 1,45 x 1,2 x 2,4 m︱Electric 380 Volt ︱Tool cupboard 2 ︱Rotary table Moore 254 mm︱Grinding head with air turbine 4 x
          The Moore gauge grinding machine is equipped with grinding heads that are driven by an air turbine. There are 4 grinding heads available. Pneumohydraulically controlled up and down stroke movement, infinitely adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the measuring spindles with vernier 0.001 mm, contour grinding, cone grinding, groove grinding, eccentric adjustment of the grinding spindle. Machine body made of Meehanit cast, strong internal ribbing, cross slide fully supported - no overhang of the table, heating in the main spindle housing. Special price! Machine dealer with own stock of 1600 m².
            x-travel 420 mm
            y-travel 270 mm
            workpiece height - mm
            table-size 254 x 482 mm
            throat 254 / 318 mm
            grinding spindle speeds 12. - 60.000 U/min.
            spindle stroke 92 mm
            spindle turning speed range 90, 136, 184, 280 U/min
            number of strokes adjustable 2 - 120 Hübe bei 51 mm
            0 1,25 µm bei 30 mm
            Required air-pressure 7 bar
            weight of the machine ca. 1430 kg
            dimensions of the machine ca. 1,45 x 1,2 x 2,4 m
            Tool cupboard 2
            Rotary table Moore 254 mm
            Grinding head with air turbine 4 x
            Description :
            The Moore gauge grinding machine is equipped with grinding heads that are
            driven by an air turbine. There are 4 grinding heads available.
            Pneumohydraulically controlled up and down stroke movement, infinitely
            adjustable by valve 2-120 strokes at 51 mm travel, direct reading of the
            measuring spindles with vernier 0.001 mm, contour grinding, cone grinding,
            groove grinding, eccentric adjustment of the grinding spindle. Machine body
            made of Meehanit cast, strong internal ribbing, cross slide fully supported -
            no overhang of the table, heating in the main spindle housing.
            Special price!
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Surface Grinding Machine

          used  Surface Grinding Machine REFORM LFU 60/30 - Digi


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12308 · Surface Grinding Machine

          REFORM - LFU 60/30 - Digi - - 1997 -

          Technical details
          grinding length 700 mm︱grinding width 330 mm︱workpiece height 255 mm︱distance spindle center to table 460 mm︱distance grinding wheel - table 385 mm︱grinding wheel size 355 x 25, Bohr. 127 mm︱table-size 600 x 300 mm︱number of spindle speeds 1450 UpM︱rapid traverse vertical 480 m/min︱cross feed 1000 mm/min︱table speed -stepless- 1-25 m/min︱spindle drive 2,2 kW︱total connected load 4 kW︱weight of the machine ca. 1,6 t︱range L-W-H 2 x 2 x 1,8 m︱dimensions of the machine ca. 2,5 x 2,5 x 1,8 m︱Electric 400 Volt ︱Magnetic plate 600 x 300 mm︱Cooling unit +paper filtration +Magnetic separator 1 x 0,9 x 0,6 m︱Seperate hydraulic equipment 0,6 x 0,4 x 0,4 m︱
          Hydraulic surface grinding machine with control panel, digital display, computer-aided automatic Depth feed AD I, electromagnetic chuck on/off, rapid feed vertically + transversely, demagnetization, man. Puller for the grinding wheel positioned at the top, coolant system with paper belt filter and magnetic separator. Function of computer-aided feed AD I: Modes: surface grinding - plunge grinding - longitudinal + transverse grinding Operating modes: Manual / stepwise / automatic. Grinding process: Automatic quick feed to minimize idle, setting coarse grinding, fine grinding, number of firing processes + retraction adjustment of the head on completion. "Hold" button for cycle interruption for control. Numerical entry of the desired grinding values + grinding processes. Machine in a compact design, grinding spindle as a sleeve spindle, spindle bearing using high-precision roller bearings with permanent grease lubrication, thus maintenance-free operation possible, guideways with automatic. Pressure oil lubrication. Machine little used - from a repair shop. In our video you can clearly see the transverse adjustment and the vertical infeed when reversing the transverse feed. Machine dealer with own stock of 1600 m².
            grinding length 700 mm
            grinding width 330 mm
            workpiece height 255 mm
            distance spindle center to table 460 mm
            distance grinding wheel - table 385 mm
            grinding wheel size 355 x 25, Bohr. 127 mm
            table-size 600 x 300 mm
            number of spindle speeds 1450 UpM
            rapid traverse vertical 480 m/min
            cross feed 1000 mm/min
            table speed -stepless- 1-25 m/min
            spindle drive 2,2 kW
            total connected load 4 kW
            weight of the machine ca. 1,6 t
            range L-W-H 2 x 2 x 1,8 m
            dimensions of the machine ca. 2,5 x 2,5 x 1,8 m
            Magnetic plate 600 x 300 mm
            Cooling unit +paper filtration +. 1 x 0,9 x 0,6 m
            Seperate hydraulic equipment 0,6 x 0,4 x 0,4 m
            Description :
            Hydraulic surface grinding machine with control panel, digital display,
            computer-aided automatic Depth feed AD I, electromagnetic chuck on/off, rapid
            feed vertically + transversely, demagnetization, man. Puller for the grinding
            wheel positioned at the top, coolant system with paper belt filter and magnetic
            separator.
            Function of computer-aided feed AD I:
            Modes: surface grinding - plunge grinding - longitudinal + transverse grinding
            Operating modes: Manual / stepwise / automatic.
            Grinding process:
            Automatic quick feed to minimize idle, setting coarse grinding, fine grinding,
            number of firing processes + retraction adjustment of the head on completion.
            "Hold" button for cycle interruption for control. Numerical entry of the
            desired grinding values + grinding processes.
            Machine in a compact design, grinding spindle as a sleeve spindle, spindle
            bearing using high-precision roller bearings with permanent grease lubrication,
            thus maintenance-free operation possible, guideways with automatic. Pressure
            oil lubrication.
            Machine little used - from a repair shop.
            In our video you can clearly see the transverse adjustment and the vertical
            infeed when reversing the transverse feed.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Drill Grinding Machine

          used  Drill Grinding Machine AVYAC C 222


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12191 · Drill Grinding Machine

          AVYAC - C 222 - - 1985 -

          Technical details
          drill diameter 2 - 26 mm︱turning speeds 2800 U/min︱total power requirement 0,75 kW︱weight of the machine ca. 190 kg︱range L-W-H ca. 1200 x 800 x 1400 mm︱Electric 380 Volt ︱Cooling equipment ︱Grinding wheel ︱Chuck 6 -Backen
          Machine dealer with own stock of 1600 m².
            drill diameter 2 - 26 mm
            turning speeds 2800 U/min
            total power requirement 0,75 kW
            weight of the machine ca. 190 kg
            range L-W-H ca. 1200 x 800 x 1400 mm
            Chuck 6 -Backen
            Description :
            Machine dealer with own stock of 1600 m².
          1.250 €
          Datasheet
          Request / Contact
          used  Drill Grinding Machine SKF Model 108 DS


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12190 · Drill Grinding Machine

          SKF - Model 108 DS - - -

          Technical details
          drill diameter 40 mm︱turning speeds 2800 U/min︱lip angle 60 - 180 °︱relief angle 3,0 - 25 °︱tool length - max. 344 mm︱total power requirement 0,85 kW︱weight of the machine ca. 238 kg.︱range L-W-H 0,86 x 0,66 x 1,19 m︱Electric 380 Volt ︱Base with extraction system ︱Grinding wheel 200 mm︱
          Twist drill grinding machine for right-hand twist drills, bores with 3 or 4 cutting edges. Tool holder - cylinder or taper shank. Machine dealer with own stock of 1600 m².
            drill diameter 40 mm
            turning speeds 2800 U/min
            lip angle 60 - 180 °
            relief angle 3,0 - 25 °
            tool length - max. 344 mm
            total power requirement 0,85 kW
            weight of the machine ca. 238 kg.
            range L-W-H 0,86 x 0,66 x 1,19 m
            Grinding wheel 200 mm
            Description :
            Twist drill grinding machine for right-hand twist drills, bores with 3 or 4
            cutting edges. Tool holder - cylinder or taper shank.
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Milling Graver Grinding Machine

          used  Milling Graver Grinding Machine Kaempf STM 2 aehnlich Deckel S1


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-11621 · Milling Graver Grinding Machine

          Kaempf - STM 2 aehnlich Deckel S1 - - -

          Technical details
          dia. of draw-in collets 4 - 24 mm︱max. radius to grind 12 mm︱grinding range 4 - 24 mm︱grinding wheel-diameter 100 mm︱total power requirement 0,4 kW︱weight of the machine ca. 100 kg︱dimensions of the machine ca. 1 x 0,6 x 0,4 m︱Electric 380 Volt ︱Base with drawer ︱Diverse collets ︱Draw-off device
          Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, puller for grinding wheel. Machine dealer with own stock of 1600 m².
            dia. of draw-in collets 4 - 24 mm
            max. radius to grind 12 mm
            grinding range 4 - 24 mm
            grinding wheel-diameter 100 mm
            total power requirement 0,4 kW
            weight of the machine ca. 100 kg
            dimensions of the machine ca. 1 x 0,6 x 0,4 m
            Description :
            Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm,
            puller for grinding wheel.
            Machine dealer with own stock of 1600 m².
          850 €
          Datasheet
          Request / Contact

          Band Saw - Automatic

          used  Band Saw - Automatic KASTO -Vollautomat SSB 260 VA / Minipos 807


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12010 · Band Saw - Automatic

          KASTO -Vollautomat - SSB 260 VA / Minipos 807 - - 1993 - Minipos 807

          Technical details
          cutting diameter 260 mm︱saw band length 4115 mm︱cutting width 260 mm︱cutting range square 260 x 260 mm︱height of material-table 950 mm︱material feed 600: 3x reversierbar mm︱multiple feed until 1800 mm︱dimensions of saw-band 4115 x 32 x 1,1 mm︱cutting speed 15-125 m/min︱power capacity saw 4 kW︱control Minipos 807 ︱min. cut-off length 6 mm︱Remaining piece length 10 / autom. 110 mm︱total power requirement 6,5 kW︱weight of the machine ca. 2 t︱dimensions of the machine ca. 2,09 x 1,9 x 2,03 m︱Electric 380 Volt ︱Chip conveyor ︱Cooling equipment ︱Material feed
          NC fully automatic band saw with vertical saw band run (saw unit off polymer concrete), cutting area around 260 mm, control Minipos 807, Clamping pressure regulation of the vices by means of a hand wheel and manometer, stepless cutting speed and cutting feed manually adjustable, hydr. material feed, hydr. saw band tension, The control processes the number of pieces and the section length. Special price! Machine dealer with own stock of 1600 m².
            cutting diameter 260 mm
            saw band length 4115 mm
            cutting width 260 mm
            cutting range square 260 x 260 mm
            height of material-table 950 mm
            material feed 600: 3x reversierbar mm
            multiple feed until 1800 mm
            dimensions of saw-band 4115 x 32 x 1,1 mm
            cutting speed 15-125 m/min
            power capacity saw 4 kW
            control Minipos 807
            min. cut-off length 6 mm
            Remaining piece length 10 / autom. 110 mm
            total power requirement 6,5 kW
            weight of the machine ca. 2 t
            dimensions of the machine ca. 2,09 x 1,9 x 2,03 m
            Description :
            NC fully automatic band saw with vertical saw band run (saw unit off
            polymer concrete), cutting area around 260 mm, control Minipos 807,
            Clamping pressure regulation of the vices by means of a hand wheel and
            manometer, stepless cutting speed and cutting feed manually adjustable, hydr.
            material feed, hydr. saw band tension, The control processes the
            number of pieces and the section length. Special price!
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Band Saw - Vertical

          used  Band Saw - Vertical MÖSSNER-REKORD SM / 400


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12292 · Band Saw - Vertical

          MÖSSNER-REKORD - SM / 400 - - -

          Technical details
          roll diameter 400 mm︱throat 390 mm︱workpiece height 240 mm︱table-size 500 x 600 mm︱throat arm - height 240 mm︱band speed 22,34,51/62,98,147 m/min︱total power requirement 1,1 kW︱weight of the machine ca. 340 kg︱dimensions of the machine ca. 1,1 x 0,65 x 1,67 m︱Electric 380 Volt ︱Complete with Stumpf-welding device Ideal ︱combined with shear and grinding stone ︱Diverse saw bands ︱Condition: ready for operation
          Solid vertical band saw machine with 6 speeds, butt welder IDEAL, carbide-tipped saw guide inserts, table 15° re. + left pivotable. Machine dealer with own stock of 1600 m².
            roll diameter 400 mm
            throat 390 mm
            workpiece height 240 mm
            table-size 500 x 600 mm
            throat arm - height 240 mm
            band speed 22,34,51/62,98,147 m/min
            total power requirement 1,1 kW
            weight of the machine ca. 340 kg
            dimensions of the machine ca. 1,1 x 0,65 x 1,67 m
            Complete with Stumpf-welding dev. Ideal
            Description :
            Solid vertical band saw machine with 6 speeds, butt welder
            IDEAL, carbide-tipped saw guide inserts, table 15° re. + left
            pivotable.
            Machine dealer with own stock of 1600 m².
          1.250 €
          Datasheet
          Request / Contact

          Cold Circular Saw

          used  Cold Circular Saw KASTO GKS 400 U / Halbautomat


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12213 · Cold Circular Saw

          KASTO - GKS 400 U / Halbautomat - - 1991 -

          Technical details
          saw blade diameter 425 mm︱cutting diameter 130 / 140 mm︱capacity 90 degrees: square 120 x 120 mm︱capacity 90 degrees: flat 260 x 80 mm︱cutting speed 11 / 22 m/min︱capacity 45 degrees: flat 180 x 80 mm︱capacity 45 degrees: round 130 mm︱capacity 45 degrees: square 110 x 110 mm︱work height max. 1050 mm︱Drive 1,6 / 2,5 kW︱weight of the machine ca. 1160 kg︱dimensions of the machine ca. 1,25 x 1,2 x 1,9 m︱Electric 380 Volt ︱Cooling equipment ︱Chip protect bonnet ︱saw blade 400 mm︱Condition: ready for operation ︱Video available on our website.
          Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture) Machine dealer with own stock of 1600 m².
            saw blade diameter 425 mm
            cutting diameter 130 / 140 mm
            capacity 90 degrees: square 120 x 120 mm
            capacity 90 degrees: flat 260 x 80 mm
            cutting speed 11 / 22 m/min
            capacity 45 degrees: flat 180 x 80 mm
            capacity 45 degrees: round 130 mm
            capacity 45 degrees: square 110 x 110 mm
            work height max. 1050 mm
            Drive 1,6 / 2,5 kW
            weight of the machine ca. 1160 kg
            dimensions of the machine ca. 1,25 x 1,2 x 1,9 m
            saw blade 400 mm
            Description :
            Semi-automatic hydr. Miter circular saw machine with miter adjustment via
            turntable, saw blade comes from below, hydr. Material clamping, stepless feed
            speed, 1 horizontal vice.
            Semi-automatic operation means:
            1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material.
            Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm,
            roller width 400 mm from a similar machine would be available for an additional
            charge of €300. But they should be adjusted by the buyer. (see last picture)
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Keyseating Machine

          used  Keyseating Machine MAILLEFER MAC 500 H


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12157 · Keyseating Machine

          MAILLEFER - MAC 500 H - - -

          Technical details
          groove width 50 mm︱drawing length 500 mm︱pulling force - max. 20 to.︱table: 500 x 400 mm︱work speed 1000 mm/min︱Drive 4,5 kW︱groove width min. ca. 6 mm︱weight of the machine ca. 1500 kg︱dimensions of the machine ca. 1800 x 500 x 1600 mm︱Electric 380 Volt ︱Tool cupboard with div. tools 1000 x 800 x 850 mm︱Electric 380 Volt ︱Working platform
          Hydraulic vertical keyseating machine mounted on underframe with working platform. Stroke length adjustment, hydr. adjustable lifting movement, tension adjustment. Can be used with drawing needles and broaches. Tool cabinet with lots of accessories and draw knives. Knife guide rods with external/internal dimensions: 15/8, 25/15, 30/15, 40/22, 70/37 mm. This means the smallest hole into which the existing knife guide rod fits = 16 mm. Dealer with own stock of 1600 m².
            groove width 50 mm
            drawing length 500 mm
            pulling force - max. 20 to.
            table: 500 x 400 mm
            work speed 1000 mm/min
            Drive 4,5 kW
            groove width min. ca. 6 mm
            weight of the machine ca. 1500 kg
            dimensions of the machine ca. 1800 x 500 x 1600 mm
            Tool cupboard with div. tools 1000 x 800 x 850 mm
            Description :
            Hydraulic vertical keyseating machine mounted on underframe with working
            platform. Stroke length adjustment, hydr. adjustable lifting movement, tension
            adjustment.
            Can be used with drawing needles and broaches. Tool cabinet with lots of
            accessories and draw knives.
            Knife guide rods with external/internal dimensions: 15/8, 25/15, 30/15, 40/22,
            70/37 mm. This means the smallest hole into which the existing knife guide rod
            fits = 16 mm.
            Dealer with own stock of 1600 m².
          Datasheet
          Request / Contact

          Thread Boring Machine - Vertical

          used  Thread Boring Machine - Vertical HAGEN & GOEBEL HG 16 E-B


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12306 · Thread Boring Machine - Vertical

          HAGEN & GOEBEL - HG 16 E-B - - 2007 -

          Technical details
          thread capacity M 16 ︱threading depth 80 mm︱throat 250 mm︱table-size 400 x 500 mm︱spindle turning speed range 280 + 1800 U/min︱quill stroke 80 mm︱thread capacity min. M 4 mm︱dayligth 315 mm︱spindle taper B 18 ︱thread capacity in Alu: M 22 ︱total power requirement 2,2 kW︱weight of the machine ca. ca. 220 kg︱dimensions of the machine ca. 1,5 x 0,9 x 2,25 m︱Electric 380 Volt ︱Base ︱Sep. switch gear cabinet ︱Foot switch ︱Minimum quantity cooling device ︱conductive cartridge 1 x ︱Rapid traverse-drill chuck
          Automatic thread cutting machine in table design, tapping with hand feed - semi- automatic - and fully automatic operation (single and continuous stroke), threading with conductive cartridge, tap breakage protection, brake motor, faster return, extended column adjustable (largest distance from table surface to lower edge of quill 780 mm), intervention protection secured by a magnetic switch. The appropriate pulleys must beavailable for the individual speeds (possible from 280 to 1800 rpm in 9 levels). This machine is equipped with 2 pulleys for the speeds 280 + 1800 rpm. Other belt slides, clamping inserts for drill chucks and conductive cartridgesare available from the manufacturer. The thread cutting performance refers to material ST 37. Minimum quantity lubrication make HPM Technologie, year 2007, 24 V. Prepared for weight compensation for multi-spindle drilling heads with flange quills. Machine comes from a workshop for the disabled and was only rarely used for one product. Please notice that the price of this machine new ist € 18500,--! Machine dealer with own stock of 1600 m².
            thread capacity M 16
            threading depth 80 mm
            throat 250 mm
            table-size 400 x 500 mm
            spindle turning speed range 280 + 1800 U/min
            quill stroke 80 mm
            thread capacity min. M 4 mm
            dayligth 315 mm
            spindle taper B 18
            thread capacity in Alu: M 22
            total power requirement 2,2 kW
            weight of the machine ca. ca. 220 kg
            dimensions of the machine ca. 1,5 x 0,9 x 2,25 m
            conductive cartridge 1 x
            Description :
            Automatic thread cutting machine in table design, tapping with hand feed - semi-
            automatic - and fully automatic operation (single and continuous stroke),
            threading with conductive cartridge, tap breakage protection, brake motor,
            faster return, extended column adjustable (largest distance from table surface
            to lower edge of quill 780 mm), intervention protection secured by a magnetic
            switch. The appropriate pulleys must beavailable for the individual speeds
            (possible from 280 to 1800 rpm in 9 levels). This machine is equipped with 2
            pulleys for the speeds 280 + 1800 rpm.
            Other belt slides, clamping inserts for drill chucks and conductive
            cartridgesare available from the manufacturer.
            The thread cutting performance refers to material ST 37.
            Minimum quantity lubrication make HPM Technologie, year 2007, 24 V.
            Prepared for weight compensation for multi-spindle drilling heads with flange
            quills. Machine comes from a workshop for the disabled and was only rarely used
            for one product.
            Please notice that the price of this machine new ist € 18500,--!
            Machine dealer with own stock of 1600 m².
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   

            Trader Profile:   Plum & Partner Werkzeugmaschinen GmbH

          Contact Trader



            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444">+49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de

          Profile of Trader




          Plum  &  Partner Werkzeugmaschinen GmbH   32257 - Bünde Winkelstraße 32 Deutschland
          Plum & Partner Werkzeugmaschinen GmbH

          Winkelstraße 32



          Contact Trader


            Plum & Partner Werkzeugmaschinen GmbH
           Winkelstraße 32
            32257 - Bünde
            Deutschland
            +49 05223 574444
            +49 5223188330
            info@plum-maschinen.de
            www.plum-maschinen.de
            Contact person:
          Herr Andreas Plum +49 5223574444
          Herr Werner H. Kloske +49 5223574444

           




          Machine category


          · 3D Drucker Metall SLM · Abkantpresse - hydraulisch · Abkantwerkzeuge · Aufspannplatte · Aufspanntisch · Ausdrehkopf · Ausklinkmaschine · Bandsäge - Automatisch · Bandsäge - horizontal · Bandsäge - Vertikal · Bearbeitungszentrum - Universal · Bearbeitungszentrum - Vertikal · Bohr- und Fräszentrum · Bohranlage · Bohrer · Bohrerschleifmaschine · Bolzenschweißgerät · Doppelschleifbock · Dornrohrbiegemaschine · Dreiwalzen - Blechbiegemaschine · Einständerexzenterpresse · Einständerpresse - Hydraulisch · Entgratmaschine · Flachschleifmaschine · Fräseinrichtung · Frässtichel-Schleifmaschine · Futter · Gewindebohrmaschine - Vertikal · Handhebel-Schere · Handspindelpresse · Hydraulikaggregat · Härteprüfer · Industriesauger · Kaltkreissäge · Kanal-Falzmaschine · Kolbenkompressor · Koordinatenschleifmaschine · Laserschneidmaschine · Leichtmetallkreissäge · Leit- und Zugspindeldrehmaschine · Lochstanze · Magnetbohrmaschine · Magnetspannplatte · Mehrspindel-Bohrkopf · Meßmittel · Nutenziehmaschine · Planscheibe · Portal - Bearbeitungszentrum · Positionierer · Profilieranlage · Profilstahlschere - Kombiniert · Querteilanlage mit Schwenkschere · Reihenbohrmaschine · Ring- Profil- Biegemaschine · Rohrbiegemaschine · Rollengang · Scheuertrommel (Rollentrommel) · Schleifmaschinenzubehör · Schleifscheibe · Schnellradialbohrmaschine · Schraubenkompressor · Schraubstock · Schutzgasschweißanlage · Schweißdrehtisch - rund · Schwenkbiegemaschine · Schwingfußelement · Säulenbohrmaschine · Tafelschere - hydraulisch · Tafelschere - mechanisch · Teilapparat · Tellerschleifmaschine · Werkstattpresse - hydraulisch · Werkzeugfräsmaschine - Universal · Werkzeughalter · Werkzeugwechselwagen · Würfeltisch ·