European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Pillar Type Swivelling Crane

          Machinelist: Pillar Type Swivelling Crane


          Pillar Type Swivelling Crane

          used Other attachments Pillar Type Swivelling Crane ABUS GP 100/3050


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-2846 · Pillar Type Swivelling Crane

          ABUS - GP 100/3050 - - unbekannt -

          Technical details
          arm length 8000 mm︱total column height 4800 /3800* mm︱weight max. in kg 2000 kg︱height of stroke 3800 mm︱flange diameter 1350 mm︱
          Foundation flanges Ø: approx 1350 mm Including pull-wire Motoric quarter turn Motoric movement of the pull-wire at the pivot arm Additional information The column is reduced by remove the middle piece (1000 mm). Then it will be reduced on a total height of approx 3800 mm. The screwed flange can be easily changed or removed!
            arm length 8000 mm
            total column height 4800 /3800* mm
            weight max. in kg 2000 kg
            height of stroke 3800 mm
            flange diameter 1350 mm
            Description :
            Foundation flanges Ø: approx 1350 mm
            Including pull-wire
            Motoric quarter turn
            Motoric movement of the pull-wire at the pivot arm
            Additional information
            The column is reduced by remove the middle piece (1000 mm). Then it will be reduced on a total height of approx 3800 mm.
            The screwed flange can be easily changed or removed!
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane VETTER mobiler Kran, 125-4


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3658 · Pillar Type Swivelling Crane

          VETTER - mobiler Kran, 125-4 - - 2001 -

          Technical details
          arm length 4000 mm︱total column height k.A. ︱weight max. in kg 125 kg︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            arm length 4000 mm
            total column height k.A.
            weight max. in kg 125 kg
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane ABUS VS 1 ton


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3660 · Pillar Type Swivelling Crane

          ABUS - VS 1 ton - - 1998 -

          Technical details
          arm length ca. 6000 mm︱total column height ca. 5000 mm︱weight max. in kg 1000 kg︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            arm length ca. 6000 mm
            total column height ca. 5000 mm
            weight max. in kg 1000 kg
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane Abus VS


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03507 · Pillar Type Swivelling Crane

          Abus - VS - - 1990 -

          Technical details
          arm length 4000 mm︱total column height 2650 ︱weight max. in kg 1000 kg︱total power requirement . kW︱weight of the machine ca. . t︱dimensions of the machine ca. m︱
            arm length 4000 mm
            total column height 2650
            weight max. in kg 1000 kg
            total power requirement . kW
            weight of the machine ca. . t
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane Abus VS


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03506 · Pillar Type Swivelling Crane

          Abus - VS - - 1990 -

          Technical details
          arm length 4000 mm︱total column height 2650 ︱weight max. in kg 1000 kg︱total power requirement . kW︱weight of the machine ca. . t︱dimensions of the machine ca. m︱
            arm length 4000 mm
            total column height 2650
            weight max. in kg 1000 kg
            total power requirement . kW
            weight of the machine ca. . t
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane ABUS A1


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-04956 · Pillar Type Swivelling Crane

          ABUS - A1 - - 1990 -

          Technical details
          height of hook 3.500 mm︱arm length 2.400 mm︱stroke 1.000 kg︱weight of the machine ca. 1,4 t︱2 available
            height of hook 3.500 mm
            arm length 2.400 mm
            stroke 1.000 kg
            weight of the machine ca. 1,4 t
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane DEMAG XXX


          • Christoph Busch GmbH
          • Dieselstr. 22
          • 41352 Korschenbroich
          • Deutschland

          • +49 (0) 2182 570 5930
            +49 (0) 2182 5785202
          • mail@busch-gruppe.de
            www.busch-gruppe.de
          #2052-05422 · Pillar Type Swivelling Crane

          DEMAG - XXX - - 1988 -

          Technical details
          arm length 2.200 mm︱height of hook 2.600 mm︱weight of the machine ca. 1,8 t︱
            arm length 2.200 mm
            height of hook 2.600 mm
            weight of the machine ca. 1,8 t
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane DEMAG 500kg


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03527 · Pillar Type Swivelling Crane

          DEMAG - 500kg - - 1976 -

          Technical details
          arm length 4500 mm︱total column height 4200 mm︱weight max. in kg 500 kg︱bottom edge arm 3200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            arm length 4500 mm
            total column height 4200 mm
            weight max. in kg 500 kg
            bottom edge arm 3200 mm
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane  500 kg


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03455 · Pillar Type Swivelling Crane

          - 500 kg - - -

          Technical details
          arm length 3000 mm︱total column height . ︱weight max. in kg 500 kg︱total power requirement . kW︱weight of the machine ca. . t︱dimensions of the machine ca. m︱
            arm length 3000 mm
            total column height .
            weight max. in kg 500 kg
            total power requirement . kW
            weight of the machine ca. . t
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane DEMAG SSW - PK 1N


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-9531705 · Pillar Type Swivelling Crane

          DEMAG - SSW - PK 1N - - -

          Technical details
          weight max. in kg 250 kg︱arm length 2000 mm︱column diameter 220 mm︱Total height OK 3000 mm︱Total height UK 2500 mm︱
          Furnishing : - Pillar slewing crane - manually swiveling - including DEMAG chain hoist PK 1N * Factory No. 5302017 * Year of construction 1979 * Lifting speed 8/4 m / min. * Revolutions 2890 rpm. - chain box
            weight max. in kg 250 kg
            arm length 2000 mm
            column diameter 220 mm
            Total height OK 3000 mm
            Total height UK 2500 mm
            Description :
            Furnishing :
            - Pillar slewing crane
            - manually swiveling
            - including DEMAG chain hoist PK 1N
            * Factory No. 5302017
            * Year of construction 1979
            * Lifting speed 8/4 m / min.
            * Revolutions 2890 rpm.
            - chain box
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane ABUS Säulenschwenkkran LS


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8531890 · Pillar Type Swivelling Crane

          ABUS - Säulenschwenkkran LS - - -

          Technical details
          weight max. in kg 1000 kg︱arm length 4000 mm︱height 3000 Unterkante Ausleger︱total column height 3790 mm︱swivelling range 270 Grad︱weight 560 kg︱
          Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. ** Fig. Shows a similar crane system
            weight max. in kg 1000 kg
            arm length 4000 mm
            height 3000 Unterkante Ausleger
            total column height 3790 mm
            swivelling range 270 Grad
            weight 560 kg
            Description :
            Description:
            - Trolley power supply
            - Trailing cable, cable slack approx. 800 mm
            - Operation from the hallway using a pendant control

            including:
            - ABUS electric chain hoist
            - Chain hoist type GM 4 1000.5-2, 2-leg
            - painted in color RAL 5017 traffic blue
            - Load capacity 1 t
            - hook path 3000 mm
            - highest hook position 2442 mm
            - Calculation basis FEM 9.901
            - Drive group 2m / M5
            - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min
            - Lifting capacity 0.22 / 0.9 kW
            - duty cycle 60% ED
            - Circuits 360 c / h

            Overload protection
            The crane system complies with the requirements of the Machinery Directive 2006/
            42 / EC
            as well as the currently valid UV regulations DGUV regulation 52
            (formerly BGV D6).

            included :
            - Anchor rods L200 (set) size LS 200
            - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8)
            - for fixing the foundation, including accessories for grouting

            There is an assembly gap between the column base to align the slewing crane
            and building floor to be provided. The assembly gap is after approx. 4 weeks
            Crane operation to be poured under by the customer.

            ** Fig. Shows a similar crane system
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane ABUS Säulenschwenkkran LS


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8531778 · Pillar Type Swivelling Crane

          ABUS - Säulenschwenkkran LS - - -

          Technical details
          weight max. in kg 250 kg︱arm length 4000 mm︱height 3425 Unterkante Ausleger︱total column height 4.025 mm︱swivelling range 270 Grad︱
          Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED ** Fig. Shows a similar crane system
            weight max. in kg 250 kg
            arm length 4000 mm
            height 3425 Unterkante Ausleger
            total column height 4.025 mm
            swivelling range 270 Grad
            Description :
            Description:
            - Load capacity 250 kg
            - projection 4000 mm
            - Construction height 4025 mm
            - Crane lacquer in color RAL 1007 daffodil yellow
            - Calculation basis DIN 15018
            - Crane classification H2 / B2
            - Operating location hall operation
            - Size / bracket profile LS36 / FormC 110x90
            - Height of the lower edge of the boom 3425 mm
            - Operating voltage 3 / PE ~ 50 Hz 400 V
            - Direct control type of control
            - Degree of protection IP55
            - Swivel range, nominally 270 °
            - Panning by hand

            including:
            - Anchor rods size LS 36
            - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for
            - Fastening to the foundation, including accessories

            Electric chain hoist:
            - Chain hoist type GM 2 250.6-1, 1-leg
            - painted in color RAL 5017
            - traffic blue
            - Load capacity 250 kg
            - hook path 4000 mm
            - highest hook position 3034 mm
            - Calculation basis FEM 9.901
            - Drive group 2m / M5
            - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min
            - Lifting power 0.09 / 0.35 kW
            - duty cycle 60% ED

            ** Fig. Shows a similar crane system
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane DEMAG


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03525 · Pillar Type Swivelling Crane

          DEMAG - - - -

          Technical details
          arm length 5000 mm︱total column height 4200 mm︱weight max. in kg 500 kg︱bottom edge arm 3200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            arm length 5000 mm
            total column height 4200 mm
            weight max. in kg 500 kg
            bottom edge arm 3200 mm
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane DEMAG 500kg


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03535 · Pillar Type Swivelling Crane

          DEMAG - 500kg - - -

          Technical details
          arm length 4000 mm︱total column height 4200 mm︱weight max. in kg 500 kg︱bottom edge arm 3200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            arm length 4000 mm
            total column height 4200 mm
            weight max. in kg 500 kg
            bottom edge arm 3200 mm
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane Abus VS


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-09206 · Pillar Type Swivelling Crane

          Abus - VS - - -

          Technical details
          arm length 2400 mm︱total column height 3120 mmm︱weight max. in kg 500 kg︱Column diameter 250 mm︱swivelling range 180 Grad︱Electric 380 Volt
          We have no documentation of this crane so we sell with a special price. Machine dealer with own stock of 2500 m².
            arm length 2400 mm
            total column height 3120 mmm
            weight max. in kg 500 kg
            Column diameter 250 mm
            swivelling range 180 Grad
            Description :
            We have no documentation of this crane so we sell with a special price.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane STAHL 500 kg


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03529 · Pillar Type Swivelling Crane

          STAHL - 500 kg - - -

          Technical details
          arm length 4000 mm︱total column height 4200 mm︱weight max. in kg 500 kg︱bottom edge arm 3200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            arm length 4000 mm
            total column height 4200 mm
            weight max. in kg 500 kg
            bottom edge arm 3200 mm
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane ABUS Säulenschwenkkran LS


          • A + B Werkzeuge Maschinen Handels GmbH
          • Rottweg 17
          • 48683 Ahaus
          • Deutschland

          • (0049)-2561-9384-71
            (0049)-2561-9384-36
          • info@ab-maschinen.de
            www.ab-maschinen.de
          #1008-8531889 · Pillar Type Swivelling Crane

          ABUS - Säulenschwenkkran LS - - -

          Technical details
          weight max. in kg 500 kg︱arm length 4000 mm︱height 3425 Unterkante Ausleger︱total column height 4215 mm︱swivelling range 270 Grad︱
          Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 2 500.4-2, 2-leg - painted i color RAL 5017 traffic blue - load capacity 500 kg - hook path 3000 mm - highest hook position 2965 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1/4 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. ** Fig. Shows a similar crane system
            weight max. in kg 500 kg
            arm length 4000 mm
            height 3425 Unterkante Ausleger
            total column height 4215 mm
            swivelling range 270 Grad
            Description :
            Description:
            - Trolley power supply
            - Trailing cable, cable slack approx. 800 mm
            - Operation from the hallway using a pendant control

            including:
            - ABUS electric chain hoist
            - Chain hoist type GM 2 500.4-2, 2-leg
            - painted i color RAL 5017 traffic blue
            - load capacity 500 kg
            - hook path 3000 mm
            - highest hook position 2965 mm
            - Calculation basis FEM 9.901
            - Drive group 2m / M5
            - Lifting, 2-stage (pole switchable) 1/4 m / min
            - Lifting power 0.09 / 0.35 kW
            - duty cycle 60% ED
            - Circuits 360 c / h

            Overload protection
            The crane system complies with the requirements of the Machinery Directive 2006/
            42 / EC
            as well as the currently valid UV regulations DGUV regulation 52
            (formerly BGV D6).

            included :
            - Anchor rods L200 (set) size LS 200
            - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8)
            - for fixing the foundation, including accessories for grouting

            There is an assembly gap between the column base to align the slewing crane
            and building floor to be provided. The assembly gap is after approx. 4 weeks
            Crane operation to be poured under by the customer.

            ** Fig. Shows a similar crane system
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane STAHL 500kg


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03530 · Pillar Type Swivelling Crane

          STAHL - 500kg - - -

          Technical details
          arm length 5000 mm︱total column height 4200 mm︱weight max. in kg 500 kg︱bottom edge arm 3200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            arm length 5000 mm
            total column height 4200 mm
            weight max. in kg 500 kg
            bottom edge arm 3200 mm
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane STAHL 500kg


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03528 · Pillar Type Swivelling Crane

          STAHL - 500kg - - -

          Technical details
          arm length 4000 mm︱total column height 4200 mm︱weight max. in kg 500 kg︱bottom edge arm 3200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            arm length 4000 mm
            total column height 4200 mm
            weight max. in kg 500 kg
            bottom edge arm 3200 mm
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane STAHL 500kg


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03531 · Pillar Type Swivelling Crane

          STAHL - 500kg - - -

          Technical details
          arm length 5000 mm︱total column height 4200 ︱weight max. in kg 500 kg︱bottom edge arm 3200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            arm length 5000 mm
            total column height 4200
            weight max. in kg 500 kg
            bottom edge arm 3200 mm
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane


          • Markus Hirsch GmbH
          • Niersweg 84
          • 47877 Willich
          • Deutschland

          • +49 2156 49894 12
            +49 2156 49894 10
          • hirsch@hirsch-maschinen.de
            www.hirsch-maschinen.de
          #1077-03558 · Pillar Type Swivelling Crane

          - - - -

          Technical details
          arm length 3600 mm︱total column height 3600 mm︱weight max. in kg . kg︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          04 Lower arm: 3000 mm Column height: 3600 mm Boom: 3000 mm
            arm length 3600 mm
            total column height 3600 mm
            weight max. in kg . kg
            Description :
            04 Lower arm: 3000 mm Column height: 3600 mm Boom: 3000 mm
          Datasheet
          Request / Contact
          used Other attachments Pillar Type Swivelling Crane DEMAG PK 2 F


          • Kirchgeorg Werkzeugmaschinen
          • Frankfurter Straße 141
          • 63303 Dreieich-Sprendlingen
          • Deutschland

          • 0049-(0)-6103-9909-0
            0049-(0)-6103-9909-50
          • info@kirchgeorg.de
            www.kirchgeorg.de
          #1072-19567 · Pillar Type Swivelling Crane

          DEMAG - PK 2 F - - -

          Technical details
          arm length 3000 m︱total column height 3,53 m︱weight max. in kg 250 kg︱stroke height 2,60 m︱total height over floor 3,536 mm︱stroke speed 1,25 / 5,00 m/min︱total power requirement 0,13 / 0,50 kW︱weight of the machine ca. t︱dimensions of the machine ca. 3,00 x 3,00 x 3,53 m︱
            arm length 3000 m
            total column height 3,53 m
            weight max. in kg 250 kg
            stroke height 2,60 m
            total height over floor 3,536 mm
            stroke speed 1,25 / 5,00 m/min
            total power requirement 0,13 / 0,50 kW
            dimensions of the machine ca. 3,00 x 3,00 x 3,53 m
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          •   
          •   

          TOP Manufacturer:

          ABUS - DEMAG - STAHL - - VETTER -