Cleaning unit

coolant capacity 480 l/h︱working pressure 170 / 17 bar / MPa︱pressure 200 / 2 bar / MPa︱total power requirement 3,0 kW︱weight of the machine ca. 28 kg︱dimensions of the machine ca. 380 x 370 x 930 mm︱

---

coolant capacity 270 – 660 l/min︱working pressure 30 – 160 / 3 – 16 (bar/MPa)︱pressure -- ︱connected load 4,7 kW︱weight of the machine ca. 111 kg︱dimensions of the machine ca. 1215 x 650 x 920 mm︱

---

coolant capacity 350 - 700 l/min︱working pressure 30 - 160 / 3 - 16 (bar/MPa)︱pressure max. 240 24 (bar/MPa)︱weight of the machine ca. 43 kg︱dimensions of the machine ca. 420 x 450 x 970 mm︱

---

coolant capacity 1000 l/h︱working pressure 230 / 23 bar / MPa︱pressure 253 / 25,3 bar / MPa︱total power requirement 7,8 kW︱weight of the machine ca. 73 kg︱dimensions of the machine ca. 560 x 500 x 1090 mm︱

---

sweeping width 942 mm︱working width Bodendüse: 700 mm︱tank Reinigung: 79 l︱tank Schmutzwasser: 83 l︱weight of the machine ca. 145 kg︱dimensions of the machine ca. 1,32 x 0,7 x 1,1 m︱

---

- Exhibition machine - - Most compact ride-on scrubber-dryer from DiBO with 2 brushes - Possibility to dispense detergent: in ECO mode with constant Saving or automatic regulation of the machine depending on the speed of the machine Brush motors and suction: even less energy consumption, even more Smoothness - Display: large, multilingual, including hour counter, battery level and work programs - Memory card: allows the storage of battery charge cycles and Power consumption of the motor - CFS system: water distribution from the middle of the brush to avoid waste Avoid cleaning solution - SLS system: self-leveling electronic system to keep the brush always lies perfectly on the floor - EDD system: suction cup for the best results during drying and during Area performance was developed - Wheels: oil resistant - Extraction: 2 levels with fans and stainless steel shaft

total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Control Siemens ︱tank 600 l︱basket dimensions Ø 670 x 960 mm︱workpiece width - max. 400 mm︱range L-W-H 2.500 x 1.400 x 2.600 mm︱weight 1.500 kg︱

---

In our opinion, the machine is in good condition used condition. *** Changes and errors in the technical data and information as well Subject to prior sale!***

6,0 m3/min︱rated current 9 A︱total power requirement 2,5 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

swarf cleaner

sweeping width 800 inkl.Seitenb.︱container volume 114 l︱total power requirement 3,0 kW︱ 2759 m²/h︱ max. 5232 m²/h︱

---

Filstra ︱suction capacity 600 cbm/h; 2.500 PA ︱ 1,25 t Traglast ︱ 3 x ︱ 1.200 x 1x200 x 2.200 mm︱total power requirement 40 kW︱weight of the machine ca. 4 t︱dimensions of the machine ca. 8.000 x 6.000 x 6.000 mm︱ ︱

---

air consumption at 6 bar 600 l/min︱compressed air 6 - 8 bar︱wash system tank capacity 65 l︱rinse tank capacity 50 l︱dimensions ca. 1350 x 800 x 2000 mm︱weight ca. 500 kg︱

---

was overhauled in 2017, all hoses were renewed. The system has been regularly serviced by the manufacturer and is in a very good condition. The machine comes from a technology laboratory for microsystems and solids. It was used to clean printing plates. New price at the time: € 38,000.00 Today's new price: € 50,000.00 for an equivalent machine

max. workpiece weight 200 kg︱diameter - cutter standard 450 mm︱workpiece height max. 350 mm︱Heating 6 kW ︱total power requirement 8 kW︱weight of the machine ca. 0,2 t︱dimensions of the machine ca. 1,4 x 1,0 x 1,6 m︱

---

total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

total power requirement unbek. kW︱weight of the machine ca. unbek. t︱dimensions of the machine ca. m︱

---