Band Saw - Vertical

roll diameter 600 mm︱throat 600 mm︱workpiece height 310 mm︱table-size 600 x 600 mm︱saw band length 4500/4750 mm︱cutting speed 15-2000 m/min︱width of saw-band 6-27 mm︱weight of the machine ca. 0,6 t︱dimensions of the machine ca. LBH 1,35 x 0,90 x 2,3 m︱

---

throat 480 mm︱workpiece height 220 mm︱table-size 750 x 650 mm︱roll diameter 530 mm︱dimensions of saw-band 3425/3725 x 6/19 x 0,85 mm︱cutting speed 10 - 154 m/min︱table - inclinable nach 2 Seiten ︱total power requirement 1,1 kW︱weight of the machine ca. 1 t︱dimensions of machine L x W x H 1,60 x 0,65 x 2,0 m︱

---

= vertical bandsaw, tilting table swivelling in 2 planes

roll diameter 420 mm︱throat 410 mm︱workpiece height 295 mm︱cutting speed 12 - 375 m/min︱table surface area 600 x 600 mm︱saw band length 3150-3260 // 3-16 mm︱work height max. 1020 mm︱voltage 380 V︱total power requirement 1,1 / 1,7 kW︱weight of the machine ca. 620 kg︱dimensions of the machine ca. 1000 x 800 x 1900 mm︱

---

** from a maintenance workshop - good condition (!!) Furnishing: - Butt welder IDEAL BSO / 16 with scissors and whetstone - 4 gear stages + 2 engine speeds - Tape guide height adjustment with handwheel - Work table can be tilted +/- 45 ° - Work table tiltable 10 °

roll diameter 320 mm︱throat 260/310 mm︱workpiece height 210 mm︱saw band length 2530/2650 mm︱width of saw-band max. 13 mm︱table-size 500 x 500 mm︱table load 0,1 t︱work height max. 945 mm︱total power requirement 1,3 kW︱weight of the machine ca. 0,47 t︱dimensions of the machine ca. BTH 800x700x1700 mm︱

---

Machine comes from a school. - including work light - Including operating instructions

roll diameter 420 mm︱throat 410 mm︱workpiece height 400 mm︱total power requirement 2,5 kW︱weight of the machine ca. 750 kg︱dimensions of the machine ca. m︱

---

vertical bandsaw with welding & grinding attachment

roll diameter 320 mm︱throat 310 mm︱workpiece height 230 mm︱engine output 0,9/1,3 kW︱saw band length 2.550 - 2630 mm︱table-size 500 x 500 mm︱cutting speed 12- 375 m/min︱weight of the machine ca. 0,43 t︱Mechanic: very good ︱Optical condition: normal and cleaned ︱The machine can be viewed under current. ︱

---

´ 27931 Color: green, 380 V with CEE plug and cable Equipment: * Swivel table * Ideal tape welding device * Grinding motor * both castors new * various saw bands * Operation manual * electrical acceptance according to DGUV V3! * Machine checked in the workshop

roll diameter 400 mm︱throat 380 mm︱workpiece height 300 mm︱total power requirement 2 kW︱weight of the machine ca. 360 kg︱dimensions of the machine ca. 1,1 x 0,7 x 2,1 m︱

---

We provide a vertical band saw of brand SAMUR / Spain. The machine of type S-400-VA is in good condition. Come for inspection to our storage in Giebelstadt, about 80min. from Frankfurt airport.

Capacity round 45º - mm ø︱Capacity square 90º - mm︱Capacity square 60º - mm︱

---

Deep throat: 1.050 mm Saw speed: 15 - 2.300 m/min Variable adjustable speed Vertical band saw with roller table and welding machine

throat 420 mm︱workpiece height 250 mm︱table: 560 x 560 mm︱table - tiltable +/- 30°/10° rechts/links ︱weight of the machine ca. 0,8 t︱

---

Vertical band saw, Type: 8A531, year of manufacture: 1978, Manufacturer: Stanko Equipment: Welding and grinding device

roll diameter 520 mm︱throat 505 mm︱workpiece height 310 mm︱table-size 700 x 700 mm︱saw band length 3900/4010 mm︱width of saw-band 3- 25 mm︱Table tiltable R/L 15/15 Grad︱Table tiltable F/B 15/10 Grad︱cutting speed 19- 2900 m/min︱total power requirement 3 kW︱weight of the machine ca. 0,83 t︱dimensions of the machine ca. 1 x 1 x 2 m︱

---

With welding arrangement.

roll diameter 420 mm︱throat 400 mm︱workpiece height 350 mm︱table surface area 615x615 mm︱weight of the machine ca. 700 kg︱dimensions of the machine ca. 1100x1000x2000 mm︱

---

roll diameter 420 mm︱throat 410 mm︱workpiece height mm︱total power requirement 2 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. m︱

---

roll diameter 500 mm︱throat 485 mm︱workpiece height mm︱total power requirement 2 kW︱weight of the machine ca. 1 t︱dimensions of the machine ca. m︱

---

roll diameter 250 mm︱throat 3380 mm︱workpiece height mm︱throat 500 mm︱cutting speed 15 - 900 m/min︱table surface area 600 x 600 mm︱total power requirement 1,1 kW︱weight of the machine ca. 0,8 t︱dimensions of the machine ca. 1,0 x 0,8 x 2,1 m︱

---

4 rolls of 30 m saw band included.

roll diameter 400 mm︱throat 280 mm︱workpiece height / mm︱total power requirement / kW︱weight of the machine ca. 0,4 t︱

---

roll diameter 400 mm︱throat 385 mm︱workpiece height 250 mm︱total power requirement kW︱weight of the machine ca. 380 t︱dimensions of the machine ca. m︱

---

roll diameter 520 mm︱throat 520 mm︱workpiece height 310 mm︱cutting speed 25 - 500 m/min︱table surface area 600 x 500 mm︱band length 3.880 x 3-16 mm mm︱Table tiltable up to 15° Grad︱work height max. 1000 mm︱total power requirement 1,5 kW︱weight of the machine ca. 500 kg.︱dimensions of the machine ca. 1,3 x 0,76 x 2,14 m︱

---

Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm wide available scope of delivery: - saw band - Tape welding device with annealing device - halogen light - Scissors - grindstone - Chip brush - blow-out device - LED digital display - Longitudinal table groove

roll diameter 315 mm︱throat 300 mm︱workpiece height 275 mm︱band length ca. 2.870 mm︱table: 500 x 500 mm︱speed 15 - 300 m/min︱engine output ca. 1,5 kW︱weight ca. 300 kg︱range L-W-H 1000 x 750 x 1750 mm︱

---

** from a training workshop - good condition Furnishing: - IDEAL saw blade welding machine model BSO / 16 - Swiveling support table * can be swiveled left 15 ° / right 30 ° - stepless speed adjustment of the saw band - Compass for 45 materials, details of: * correct cutting speed * Saw band width * Number of teeth * Radii - 1x roll of endless saw band - Operating instructions in PDF format

roll diameter NA mm︱throat NA mm︱workpiece height mm︱working area 200 mm︱workpiece dia. 200 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Bandsaw for Butcher

Table length 600 mm︱Table width 431 mm︱Deep throat 410 mm︱Saw speed 900- 450 m/min︱Engine 1,5 kW︱

---

Machine dimensions (lxwxh): 768 x 512 x 2.048 mm Machine weight: 130 kg Plastic sawing machine Max. cutting height: 270 mm 220/ 230 V

Capacity round 45º - mm ø︱Capacity square 90º - mm︱Capacity square 60º - mm︱

---

Deep throat: 1.015 mm Saw speed: 5 - 1.400 m/min Variable adjustable speed

roll diameter 520 mm︱throat 495 mm︱workpiece height 300 mm︱table-size 680x750 mm︱weight of the machine ca. 0.7 t︱dimensions of the machine ca. 1x1.4x2 m︱

---

With band saw welding, cutting and grinding device www.marcels-maschinen.ch

Workpiece height 230 mm︱Table length 610 mm︱Table width 610 mm︱Deep throat 450 mm︱

---

band width 16 mm︱machine weight ab. 560 kg︱dimensions 1000 x 1300 x 2300 mm︱

---