Aluminium Circular Saw

saw blade diameter 400 mm︱cutting diameter 130 mm︱turning speed range 1420 / 2840 U/min︱total power requirement 4,5 kW︱weight of the machine ca. 0,6 t︱dimensions 1,1 x 0,9 x 1,8 m︱

---

saw blade diameter 350x 32 mm︱turning speeds 3000 U/min︱ 115 x 115 mm︱ 160 x 90 mm︱capacity 90 degrees: round 125 mm︱ 110 x 110 mm︱Capacity 45° rectangular 75 x 45 mm︱ 120 mm︱Cutting height 125 mm︱total power requirement 1,5 kW︱weight of the machine ca. 68 kg︱dimensions of the machine ca. 780 x 480 x 850 mm︱

---

Description: The TL-302-SA is a manual table saw (pneumatic span) with easy safe operation! With this machine, double miter cuts on the right and left are possible up to 45 °. The miter adjustment is done here by turning the stop jaw. The TL-302-SA has a compact design with clear operation. The saw cut is done manually from below into the material to be processed. The material is stretched over two pneumatic clamping cylinders. Furthermore, this model is equipped with a minimal lubrication system and a fixed protection against the cutting area.

saw blade diameter 350 x 32 mm︱turning speeds 3000 U/min︱ 110 / mass. 95 mm︱ 175 x 75 mm︱capacity 90 degrees: round 125 mm︱ 85 / mass. 80 mm︱Capacity 45° rectangular 100 x 80 mm︱ 105 / mass 90 mm︱total power requirement 1,5 kW︱weight of the machine ca. 180 kg︱dimensions of the machine ca. 1200 x 1100 x 1500 mm︱

---

Industrial aluminium sawing machine. The machine's pneumatic control enables it to saw automatically. Work pieces are clamped pneumatically. The sawing machine has an oil nebuliser for better sawing results. With adjustable sawing feed. Accessories: saw blade comes up from below hard metal saw blade sawing speed adjustable length stop air gun lubrication system including saw blade 13.15.1015

saw blade diameter 500 x 32 x 4 mm︱turning speeds 3580 U/min︱ 230 x 180 mm︱ 135 x 135 mm︱Capacity 45° rectangular 165 x 180 mm︱ 115 x115 mm︱operating pressure 6 - 8 bar︱voltage 380 V︱total power requirement 3,0 / 4,0 kW︱weight of the machine ca. 220 kg︱dimensions of the machine ca. 980 x 1130 x 1430 mm︱

---

Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting aluminium profiles (Hydraulic speed setting) Spray cooling system for aluminium profiles Measuring conveyor in the desired size (3-6 m right) Assistant conveyor in desired sizes (3-6 m left) Automatic Measurement Conveyor Aligning the desired size via digital display

saw blade diameter 650 x 50 mm︱turning speeds 3000 U/min︱ 230 x 230 mm︱ 400 x 100 mm︱capacity 90 degrees: round 250 mm︱cutting speed 55 m/sec.︱work height max. 970 mm︱Cutting height 250 mm︱ 80 db (A)︱total power requirement 5,5 kW︱weight of the machine ca. 450 kg︱dimensions of the machine ca. 820 1300 x 1660 mm︱

---

Description: Industrial aluminium sawing machine. The machine's pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included

saw blade diameter 550 x 32 x 4 mm︱turning speeds 3580 U/min︱ 260 x 200 mm︱ 155 x 155 mm︱Capacity 45° rectangular 180 x 200 mm︱ 130 x 130 mm︱operating pressure 6 - 8 bar︱voltage 380 V︱total power requirement 3 / 4 kW︱weight of the machine ca. 220 kg︱dimensions of the machine ca. 980 x 1130 x 1430 mm︱

---

Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting aluminium profiles (Hydraulic speed setting) Spray cooling system for aluminium profiles Measuring conveyor in the desired size (3-6 m right) Assistant conveyor in desired sizes (3-6 m left) Automatic Measurement Conveyor Aligning the desired size via digital display

saw blade diameter 600 x 50 mm︱turning speeds 3000 U/min︱ 210 x 210 mm︱ 350 x 110 mm︱capacity 90 degrees: round 230 mm︱cutting speed 55 m/sec.︱work height max. 970 mm︱total power requirement 4,0 kW︱weight of the machine ca. 450 kg︱dimensions of the machine ca. 820 x 1300 x 1660 mm︱

---

Description: Industrial aluminium sawing machine. The machine's pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included

saw blade diameter 650 x 50 mm︱turning speeds 3000 U/min︱ 230 x 230 mm︱ 400 x 100 mm︱capacity 90 degrees: round 250 mm︱ 190 x 190 mm︱Capacity 45° rectangular 260 x 100 mm︱ 230 mm︱cutting speed 55 m/sec.︱work height max. 970 mm︱total power requirement 4,0 kW︱weight of the machine ca. 450 kg︱dimensions of the machine ca. 1400 x 820 x 1660 mm︱

---

Description: Industrial aluminium sawing machine. The machine's pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included

saw blade diameter 450 x 30 mm︱turning speeds 2800 U/min︱ 130 x 130 mm︱ 200 x 100 mm︱capacity 90 degrees: round 140 mm︱ 120 x 120 mm︱Capacity 45° rectangular 150 x 100 mm︱ 140 mm︱cutting speed 55 m/sec.︱work height max. 970 mm︱Cutting height max. 148 mm︱total power requirement 2,2 kW︱weight of the machine ca. 450 kg︱dimensions of the machine ca. 1400 x 1000 x 1800 mm︱

---

Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf

saw blade diameter 350 x 32 mm︱turning speeds 3000 U/min︱ 100 x 100 mm︱ 170 x 60 mm︱capacity 90 degrees: round 100 mm︱work height max. 970 mm︱Cutting height max. 100 mm︱total power requirement 1,9 kW︱weight of the machine ca. 260 kg︱dimensions of the machine ca. 1400 x 850x 970 mm︱

---

Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf

saw blade diameter 500 x 50 mm︱turning speeds 3000 U/min︱ 150 x 150 mm︱ 250 x 75 mm︱capacity 90 degrees: round 150 mm︱work height max. 970 mm︱Cutting height max. 150 mm︱total power requirement 3,0 kW︱weight of the machine ca. 450 kg︱dimensions of the machine ca. 1950 x 1050 x 970 mm︱

---

Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf

saw blade diameter 650 x 50 mm︱turning speeds 3000 U/min︱ 230 x 230 mm︱ 400 x 100 mm︱capacity 90 degrees: round 250 mm︱work height max. 970 mm︱Cutting height max. 250 mm︱cutting speed 55 m/sec.︱total power requirement 5,6 kW︱weight of the machine ca. 720 kg︱dimensions of the machine ca. 2020 x 1610 x 975 mm︱

---

Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf

saw blade diameter 350 x 32 mm︱turning speeds 3000 U/min︱ 100 x 100 mm︱ 170 x 60 mm︱capacity 90 degrees: round 100 mm︱work height max. 970 mm︱Cutting height max. 100 mm︱Control ︱total power requirement 1,9 kW︱weight of the machine ca. 320 kg︱dimensions of the machine ca. 1400 x 850x 970 mm︱

---

Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf

saw blade diameter 500 x 50 mm︱turning speeds 3000 U/min︱ 150 x 150 mm︱ 250 x 75 mm︱capacity 90 degrees: round 150 mm︱work height max. 970 mm︱Cutting height max. 150 mm︱feed 700 mm︱Control ︱total power requirement 3,0 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 2050 x 1150 x 990 mm︱

---

Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf

saw blade diameter 650 x 50 mm︱turning speeds 3000 U/min︱ 230 x 230 mm︱ 400 x 100 mm︱capacity 90 degrees: round 250 mm︱work height max. 970 mm︱Cutting height max. 250 mm︱cutting speed 55 m/sec.︱total power requirement 5,6 kW︱weight of the machine ca. 720 kg︱dimensions of the machine ca. 2020 x 1610 x 975 mm︱

---

Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf

saw blade diameter 600 x 50 mm︱turning speeds 3000 U/min︱ 175 x 175 mm︱ 300 x 90 mm︱capacity 90 degrees: round 220 mm︱work height max. 970 mm︱Cutting height max. 220 mm︱total power requirement 4,1 kW︱weight of the machine ca. 650 kg︱dimensions of the machine ca. 2020 x 1510 x 975 mm︱

---

Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf

saw blade diameter 800 x 50 mm︱turning speeds 3000 U/min︱ 245 x 245 mm︱ 380 x 100 mm︱capacity 90 degrees: round 280 mm︱ 210 x 210 mm︱Capacity 45° rectangular 265 x 100 mm︱ 245 mm︱cutting speed 55 m/sec.︱work height max. 970 mm︱Cutting height max 310 mm︱total power requirement 4,0 kW︱weight of the machine ca. 590 kg︱dimensions of the machine ca. 1500 x 820 x 1700 mm︱

---

Description: Industrial aluminium sawing machine. The machine's pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included

saw blade diameter 600 x 50 mm︱turning speeds 3000 U/min︱ 175 x 175 mm︱ 300 x 90 mm︱capacity 90 degrees: round 220 mm︱work height max. 970 mm︱Cutting height max. 200 mm︱cutting speed 55 m/sec.︱Control ︱total power requirement 4,1 kW︱weight of the machine ca. 650 kg︱dimensions of the machine ca. 2020 x 1510 x 975 mm︱

---

Description: The ALU FRONT-450 is a double bevel machine with a swivel range of 45 ° left and 22.5 ° right and an automatic miter adjustment via stop functions. The saw stroke runs automatically and the material is pneumatically tensioned. The saw blade (450 x 30 mm) runs horizontally! Features: automatic mode Double miter right / left Saw stroke from bottom to top Carbide saw blade Saw speed adjustable length stop air pistol Minimal quantity cooling lubrication including sepia leaf

saw blade diameter 500 x 50 mm︱turning speeds 3000 U/min︱ 150 x 150 mass. 95 mm︱ 300 x 125 mm︱capacity 90 degrees: round 180 mass. 95 mm︱ 120 x 120 / mass. 85 mm︱Capacity 45° rectangular 145 x 120 mm︱ 150 / mass 100 mm︱total power requirement 3,0 kW︱weight of the machine ca. 430 kg︱dimensions of the machine ca. 1200 x 1100 x 1500 mm︱

---

Description: Industrial aluminium sawing machine. The machine's pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included

saw blade diameter 600 x 50 mm︱turning speeds 3000 U/min︱ 200 x 200 mm︱ 500 x 50 mm︱capacity 90 degrees: round 230 mm︱ 160 x 160 mm︱Capacity 45° rectangular 250 x 100 mm︱ 230 mm︱total power requirement 4,1 kW︱weight of the machine ca. 500 kg︱dimensions of the machine ca. 1300 x 1220 x 1635 mm︱

---

Description: Industrial aluminium sawing machine. The machine's pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included

saw blade diameter 400 x 32 x 4 mm︱turning speeds 3400 U/min︱ 160 x 130 mm︱Capacity 45° rectangular 125 x 125 mm︱voltage 380 V︱operating pressure 6 - 8 bar︱total power requirement 1,5 / 2,0 kW︱weight of the machine ca. 100 kg︱dimensions of the machine ca. 710 x 810 x 1400 mm︱

---

Standard Accessories Mitre left & right up to 45°, 30°, 22.5°, 15°, 0° location points Intermediate angles via manual lock Twin horizontal pneumatic clamps Pressure regulator for clamps On/Off switch for clamps Machine stand Air gun included Precision angle cutting Ideal for commercial aluminium and general profile cutting Standard conveyor (2 mt. right) Durable cast hub Optional Equipment Measuring conveyor in the desired size (3-6 m right) Assistant conveyor in desired sizes (3-6 m left) 1500 mm long, double-sized caliper bracket Pneumatic and automatic working system Hydro-pneumatic system for aluminium profiles Cooling system for cutting aluminium profiles Hydro-check for cutting aluminium profiles (Hydraulic speed setting) Automatic Measurement Conveyor Aligning the desired size via digital display

saw blade diameter 400 x 32 x 4 mm︱turning speeds 3580 U/min︱ 150 x 100 mm︱ 120 x 120 mm︱Capacity 45° rectangular 130 x 80 mm︱ 100 x 100 mm︱operating pressure 6 - 8 bar︱voltage 380 V︱total power requirement 1,5 / 2,0 kW︱weight of the machine ca. 132 kg︱dimensions of the machine ca. 720 x 760 x 1330 mm︱

---

Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting aluminium profiles (Hydraulic speed setting) Spray cooling system for aluminium profiles Measuring conveyor in the desired size (3-6 m right) Assistant conveyor in desired sizes (3-6 m left) Automatic Measurement Conveyor Aligning the desired size via digital display

saw blade diameter 450 x 32 x 4 mm︱turning speeds 3000 U/min︱ 210 x 170 mm︱ 130 x 130 mm︱Capacity 45° rectangular 145 x 170 mm︱ 100 x 100 mm︱operating pressure 6 - 8 bar︱voltage 380 V︱total power requirement 2,2 / 3,0 kW︱weight of the machine ca. 180 kg︱dimensions of the machine ca. 850 x 970 x 1370 mm︱

---

Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting aluminium profiles (Hydraulic speed setting) Spray cooling system for aluminium profiles Measuring conveyor in the desired size (3-6 m right) Assistant conveyor in desired sizes (3-6 m left) Automatic Measurement Conveyor Aligning the desired size via digital display

saw blade diameter 700 x 50 mm︱turning speeds 3000 U/min︱ 250 x 250 mm︱ 400 x 140 mm︱capacity 90 degrees: round 275 mm︱cutting speed 55 m/sec.︱work height max. 970 mm︱total power requirement 5,5 kW︱weight of the machine ca. 550 kg︱dimensions of the machine ca. 820 x 1400 x 1660 mm︱

---

Description: Industrial aluminium sawing machine. The machine's pneumatic control enables it to saw automatically, with the addition of standard horizontal pneumatic clamps. The sawing machine has an oil nebuliser for better sawing results. The saw feed is adjustable and the machine is supplied with a 500 x 50 mm saw blade. Accessories: - saw blade movement from below - saw blade with corbide teeth - adjustable sawing speed - length stop - lubrication system - air gun - saw blade included