double-sided high speed press

pressure 160 t︱stroke 12-180 mm︱strokes - infinitely variable 48-120 Hub/min︱ 500 mm︱table surface area 1900x1100 mm︱ram surface 1950x1100 mm︱ram - range of adjustment 100 mm︱distance between columns 1800 mm︱ 700 ︱power capacity 30 kW︱weight 26,3 t︱dimensions BxTxH 3000x2300x4400 mm︱table height 990 mm︱

---

pressure 300 t︱stroke 20-160 mm︱no. of strokes 20 - 100 Hub/min︱Control Siemens S7 ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

A precision stamping and forming machine (300To) Machine including conveyor system from the manufacturer Arku. Technical specifications: • Nominal pressing force 3,000 KN • Stroke rate 20 - 100 1 / min • Press table area 2,000 x 1,000 mm • Ram clamping surface 2,000 x 950 mm • Mold installation height max. 500 mm (with a lifting height of 160 mm at UT) • Slide position adjustment 150 mm • Pin position fine adjustment accuracy 0.01 adjustable during the run • Hydraulic overload protection • Installation elements • Siemens S7 PC control with 15 inch PC Touch • Press force display with monitoring function • 8-way cam switch mechanism • Press body and ram made of spheroidal graphite cast iron (GJS / GGG) Planetary gear: • Increased work capacity • Hydraulic clutch / brake combination Automatic stroke adjustment 20-160 mm: Stroke steps: 20, 32, 42, 53, 64, 75, 85, 95, 105, 114, 122, 130, 137, 148, 156, 160 mm Vibration elements: 1 set consisting of 4 pieces of VISCO cushioning Sockets / connections: Various sockets 230 V and 400 V. Linking for belt lubricator: Electrical interface prepared for controlling a Belt lubricator Tool lock SAS 800 Convenient tool monitoring on a PC basis with the following functions: - 8 digital inputs - Clear graphic representation of the input signals and the Parameter data for quick fault diagnosis - AUTO-SET function: Automatic recording of the sensor signals Continuous tool support bars: 2 pieces of continuous ball-bearing bars with quick-release couplings. With Brackets and query via limit switch, mounted on the side of the press body Additional equipment Arku conveyor system: • Band width 50 - 500 mm • Tape thickness 0.5 - 5 mm • Belt cross-section max. 1,250 mm² • Coil weight max. 5,000 kg Arku feed straightener CompactFeed® 50500/9: • Band width 50 - 500 mm • Band thickness max. 5 mm • Straightening roll diameter 56 mm • Hard-chrome plated straightening rollers with support • Number of straightening rolls 9 pieces • Straightening roll diameter 56 mm • Cycle ventilation: hydraulic, can be activated up to 80 strokes / min ARKU - single-sided reel AH 5000/500 / MSG-4Q: • Band widths from 80 mm with applied pressure arm • Spreading range 470 - 530 mm • Outside coil diameter 1,600 mm • Load capacity 5,000 kg • Hydraulic expansion • Pressure arm with driven pressure roller • The rear coil guide can be moved over two conical rollers • The front coil guide can be swiveled and moved using two conical rollers • Drive - works in automatic mode as wear-free and silent brake ARKU - coil charging station: • Lifting stroke of the loading chair: approx. 500 mm • Reel travel: approx. 1300 mm ARKU - insertion aid: • mounted on the straightening feed unit • enables the beginning of the tape to be transferred safely to the Straightener Protective fence around the press feeding system • CE-compliant protective fence concept around the press feed system

Press capacity 50 t︱Slide adjustment 40 mm︱Shut height (stroke down, adjustment up) 605 mm︱Free frontal opening L-R 560 mm︱Table surface area 500 x 650 mm︱Hole in table 220 x 350 mm︱Number of strokes 80 - 160 min-1︱Height over floor approx. 3.400 mm︱Width 1.600 mm︱Weight of machine approx. 7.5 t︱sheet width 300 mm︱Electrics 96 mm︱Bandeinlaufhöhe 235 - 335 mm︱sheet width 10 - 300 mm︱Levelling speed 30 m / min︱Coil weight 3.0 t︱Material width 0 - 300 mm︱Coil exterior diameter 1.400 - 1.500 mm︱Coil interior diameter 450 - 550 mm︱

---

Excellent condition, only 8.600 working hours and incl. spare partsRegularly maintenance 

Pressure total 630 t︱Slide adjustment 300 mm︱Shut height (stroke down, adjustment up) 910 mm︱Table surface area 2.500 x 1.500 mm︱Hole in table 2.200 x 500 mm︱Number of strokes 20 - 80 min-1︱Bandeinlaufhöhe 290 mm︱Free frontal opening L-R 3.000 mm︱Height over floor approx. 6.300 mm︱Dimensions L x W x H 8 x 3,2 x 7,2 m︱

---

The Press is in a very good condition.Complete overhauling in 2002 (CompanyRaster) überholt (new SIEMENS S7 PLC, Unidor APS, Baumüller main drive and drive control, DESCH clutch-brake-combination, mechanic complete as well as a new cabinet and new cables)Additionally feeding and transfer unit have been overhauled through company Dreher.In 2020 DESCH clutch-brake-combination has been overhauled from Desch..Overhauling of balancing cylinders.Yearly safety checks.

Press capacity 160 t︱Slide adjustment 125 mm︱Shut height (stroke down, adjustment up) 600 mm︱Free frontal opening L-R 2.020 mm︱Free lateral opening F-B 620 mm︱Table surface area 2.000 x 1.000 mm︱Hole in table 1.700 x 300 mm︱Number of strokes 10 - 50 min-1︱Height over floor approx. 4.400 mm︱Dimensions L x W x H 5.166 x 2.500 x 4.400 mm︱Weight of machine approx. 38 t︱

---

Press capacity 400 t︱Slide adjustment 175 mm︱Shut height (stroke down, adjustment up) 895 mm︱Free lateral opening F-B 600 ︱Table surface area 2.000 x 1.250 mm︱Hole in table 1.750 x 200 mm︱Number of strokes 10 - 50 min-1︱Height over floor approx. 5.450 mm︱Weight of machine approx. 65 t︱

---

with GERB elements, with moving bolster plate for quick die change, with transfer from GPA

Pressure total 315 t︱Slide adjustment 100 mm︱Shut height (stroke down, adjustment up) 1.050 mm︱Free frontal opening L-R 2.740 mm︱Free lateral opening F-B 1.500 mm︱Table surface area 2.740 x 1.800 mm︱Number of strokes 10 - 60 min-1︱Working hours machine 77.341 h︱Height over floor approx. 5.500 mm︱Dimensions L x W x H 5.400 x 3.300 x 5.700 mm︱Weight of machine approx. 80 t︱

---

pressure 63 t︱stroke 10-80 mm︱no. of strokes 65-400 Hub/min︱ram - range of adjustment 80 mm︱table surface area 1030x550 mm︱ram surface 920x450 mm︱hole in the table 700x200 mm︱ 420 mm︱weight of the machine ca. 10 t︱

---

pressure 250 t︱stroke 20-160 mm︱no. of strokes 30-240 Hub/min︱ram adjustment 150 mm︱table surface area 1200x1000 mm︱hole in the table 500x180 mm︱tool hole in ram Ø52 mm︱total power requirement 50 kW︱weight of the machine ca. 35 t︱dimensions of the machine ca. LxBxH 3700x2300x3900 mm︱

---

Press capacity 80 t︱Slide adjustment 0 - 80 mm︱Shut height (stroke down, adjustment up) 310 mm︱Free frontal opening L-R 800 mm︱Table surface area 780 x 640 mm︱Hole in table 690 x 170 mm︱Number of strokes 30 - 300 min-1︱Height over floor approx. 2900 mm︱Weight of machine approx. 12 t︱

---

Press capacity 40 t︱Slide adjustment 50 mm︱Shut height (stroke down, adjustment up) 270 mm︱Free frontal opening L-R 600 mm︱Free lateral opening F-B 190 mm︱Table surface area 600 x 500 mm︱Hole in table 500 x 110 mm︱Number of strokes 65 - 400 min-1︱Height over floor approx. 2.800 mm︱Weight of machine approx. 6,2 t︱

---

Press capacity 100 t︱Slide adjustment 80 mm︱Shut height (stroke down, adjustment up) 450 mm︱Free lateral opening F-B 400 x 470 mm︱Table surface area 1.200 x 800 mm︱Hole in table 900 x 200 mm︱Number of strokes 40 - 240 min-1︱Dimensions L x W x H 3.550 x 2.100 x 3.700 ︱Weight of machine approx. 20 t︱

---

Press capacity 32 t︱Slide adjustment 50 mm︱Shut height (stroke down, adjustment up) 245 mm︱Free frontal opening L-R 540 mm︱Free lateral opening F-B mm︱Table surface area 540 x 520 mm︱Number of strokes 400 min-1︱Height over floor approx. 2800 x 3000 x 2500 mm︱Weight of machine approx. 5,5 t︱

---

Pressure total 250 t︱Slide adjustment 150 mm︱Shut height (stroke down, adjustment up) 300 - 600 mm︱Table surface area 1700 x 1000 mm︱Hole in table 1400 x 200 mm︱Number of strokes 25 - 125 min-1︱Required power 53 kW︱Height over floor approx. 6.300 mm︱

---

The Press is in a very good condition.Complete overhauling in 2002 (CompanyRaster) überholt (new SIEMENS S7 PLC, Unidor APS, Baumüller main drive and drive control, DESCH clutch-brake-combination, mechanic complete as well as a new cabinet and new cables)Additionally feeding and transfer unit have been overhauled through company Dreher.In 2020 DESCH clutch-brake-combination has been overhauled from Desch..Overhauling of balancing cylinders.Yearly safety checks.

Pressure total 250 t︱Slide adjustment 150 mm︱Shut height (stroke down, adjustment up) 300 - 600 mm︱Table surface area 1700 x 1000 mm︱Hole in table 1400 x 200 mm︱Number of strokes 25 - 125 min-1︱Required power 53 kW︱Height over floor approx. 6.300 mm︱

---

The Press is in a very good condition.Complete overhauling in 2002 (CompanyRaster) überholt (new SIEMENS S7 PLC, Unidor APS, Baumüller main drive and drive control, DESCH clutch-brake-combination, mechanic complete as well as a new cabinet and new cables)Additionally feeding and transfer unit have been overhauled through company Dreher.In 2020 DESCH clutch-brake-combination has been overhauled from Desch..Overhauling of balancing cylinders.Yearly safety checks.

Press capacity 32 t︱Slide adjustment 50 mm︱Shut height (stroke down, adjustment up) 270 mm︱Free frontal opening L-R 685 mm︱Free lateral opening F-B 250 mm︱Table surface area 680 x 530 mm︱Hole in table 450 x 110 mm︱Number of strokes 65 - 400 min-1︱Height over floor approx. 2.800 mm︱Weight of machine approx. 5,5 t︱

---

Press capacity 35 t︱Slide adjustment 50 mm︱Shut height (stroke down, adjustment up) 250 mm︱Free frontal opening L-R 430 mm︱Table surface area 410 x 410 mm︱Hole in table 170 x 110 mm︱Number of strokes 60 - 300 min-1︱Weight of machine approx. 2,4 t︱

---

Before delivery Press gets a new PLC.

pressure 80 t︱stroke 8-125 mm︱no. of strokes 10-600 Hub/min︱table surface area 1030x650 mm︱ram surface 920x600 mm︱ram - range of adjustment 80 mm︱dayligth 400 mm︱weight of the machine ca. 13 t︱

---

Press capacity 40 t︱Slide adjustment 50 mm︱Shut height (stroke down, adjustment up) 310 mm︱Free frontal opening L-R 820 mm︱Table surface area 810 x 450 mm︱Hole in table 600 x 110 mm︱Number of strokes 100 - 1.000 min-1︱Weight of machine approx. 6,8 t︱

---

pressure 30 t︱stroke 6-50 mm︱no. of strokes 60-300 Hub/min︱table surface area 400x600 mm︱hole in the table 100x450 mm︱weight of the machine ca. 4 t︱

---

pressure 160 t︱stroke 160 fix mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱distance table/ram, max. stroke up, adjustment up 735 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱side window 600 mm︱ram adjustment 125 mm︱material width of feeder 550 mm︱material thickness of feeder 0 - 6,0 mm︱feed length 350 mm︱material cross-cut 1100 mm²︱Feed speed 50 m/min.︱power requirement 45,0 kW︱weight 25,0 t︱dimensions (WxDxH) 2,3 x 2,1 x 4,7 m︱

---

Our list price is inclusive putting the machine in our warehouse and demonstration of the functions without tools, otherwise as is where is, free on truck regelb with infinitely variable Drive (PIV), wheel guard, flywheel brake, 2 rods, hydr. Overload protection, motorized sliede adjustement, ram locking pneum. Ram weight compensation, motor. Automatic lubrication, mech. Feeder (type RS 350/550 SL 90, year 83)

Press capacity 45 t︱Slide adjustment 50 mm︱Shut height (stroke down, adjustment up) 300 mm︱Free frontal opening L-R 710 mm︱Table surface area 700 x 450 mm︱Hole in table 600 x 100 mm︱Number of strokes 80 - 400 min-1︱Height over floor approx. 2900 mm︱Weight of machine approx. 7,2 t︱

---

pressure 125 t︱stroke 10 - 80 mm︱no. of strokes 50 - 300 /min︱distance between columns 1180 mm︱table surface area 1150 x 850 mm︱hole in the table 1000 x 220 mm︱ram surface 1210 x 550 mm︱distance table - lower edge of ram max 420 mm︱ram adjustment 0 - 100 mm︱material width of feeder 350 mm︱material thickness of feeder 0 - 6,0 mm︱feed length 350 mm︱run-in height 60 - 140 mm︱power requirement 22 kW︱weight 20 t︱dimensions (WxDxH) - m︱

---

Punching machine incl. - Feeder Modell RS 350 SL - Straightening machine - Kohler decoiler - Tool Monitor VTM 30 - Overload indicator (2-connecting rod maximum indicator) - Klöckner-Möller/Siemens Elektric 4392h Running Hours

Press capacity 45 t︱Slide adjustment 50 mm︱Shut height (stroke down, adjustment up) 220 - 300 mm︱Free frontal opening L-R 560 mm︱Table surface area 550 x 450 mm︱Hole in table 450 x 100 mm︱Number of strokes 100 - 500 min-1︱Weight of machine approx. 6,2 t︱

---