European network of stockholding machinery dealers

Bitte einen Suchbegriff eingeben - Please enter a search term
Category:
    Manufacturer:
      Machines:
        Trader:

          Presses

          Machinelist: Presses


          2 Column Press - hydr. - Dualform

          used Presses 2 Column Press - hydr. - Dualform MÜLLER-WEINGARTEN ZE 500-12/12.2.1 (UVV)


          • Amann Werkzeugmaschinen GmbH
          • Landshuter Straße 1
          • 85716 Unterschleißheim
          • Deutschland

          • (0049) 89 317754 0
            (0049) 89 3174262
          • info@amann-wzm.de
            www.amann-wzm.de
          #1006-16510 · 2 Column Press - hydr. - Dualform

          MÜLLER-WEINGARTEN - ZE 500-12/12.2.1 (UVV) - - 1976 / 1990 -

          Technical details
          pressure 500 t︱distance between columns 1220 mm︱max. ram stroke 600 mm︱distance table/ram, max. stroke up, adjustment up 1000 mm︱table surface area 1600 x 1200 mm︱die-cushion pressure inside the table 320 t︱stroke of drawing cushion in table 150 mm︱drawing cushion surface in table 750 x 812 mm︱die-cushion pressure in pusher 180 t︱stroke of drawing cushion in pusher 100 mm︱drawing cushion surface in pusher 750 x 625 mm︱ram surface 1600 x 1200 mm︱table height over floor 800 mm︱feed down 665 mm/sec︱feed up 530 mm/sec︱working feed 34 - 100 mm/sec︱quantity of oil 2000 l︱power capacity 180 kW︱weight 40 t︱dimensions of the machine ca. 3,2 x 2,4 x 7,5 m︱
          by using oil-hydraulic drive, hydraulic and electric control UVV, die cushion in bed and slide, adjustable drawing speed, punching limit with damping plunger lock, electric cabinet Our list price is WITHOUT starting the machine,just as it is
            pressure 500 t
            distance between columns 1220 mm
            max. ram stroke 600 mm
            distance table/ram, max. stroke . 1000 mm
            table surface area 1600 x 1200 mm
            die-cushion pressure inside the . 320 t
            stroke of drawing cushion in tab. 150 mm
            drawing cushion surface in table 750 x 812 mm
            die-cushion pressure in pusher 180 t
            stroke of drawing cushion in pus. 100 mm
            drawing cushion surface in pushe. 750 x 625 mm
            ram surface 1600 x 1200 mm
            table height over floor 800 mm
            feed down 665 mm/sec
            feed up 530 mm/sec
            working feed 34 - 100 mm/sec
            quantity of oil 2000 l
            power capacity 180 kW
            weight 40 t
            dimensions of the machine ca. 3,2 x 2,4 x 7,5 m
            Description :
            by using oil-hydraulic drive, hydraulic and electric control
            UVV, die cushion in bed and slide, adjustable drawing speed,
            punching limit with damping plunger lock, electric cabinet
            Our list price is WITHOUT starting the machine,just as it is















        • Amann Werkzeugmaschinen GmbH
        • Landshuter Straße 1
        • 85716 Unterschleißheim
        • Deutschland

        • Datasheet
          Request / Contact

          bending press

          used Presses bending press LOTZE 391


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3749 · bending press

          LOTZE - 391 - - 1992 - DNC 90

          Technical details
          pressure 100 t︱chamfer lenght 3100 mm︱column daylight 2540 mm︱stroke 300 mm︱table height over floor 750 mm︱Control DNC 90 ︱total power requirement 8,6 kW︱weight of the machine ca. 8500 kg︱Overall size ca. 3540x1240x2555 mm︱
          Machines type 391 Machine no.: 67 39130049 -4 controlled axes -crowning -Extended back gauge -pneumatic matrix displacement -hydraulic upper tool clamping -various tools -Tool cabinet extra large stroke 300mm -various tools Machine does not have a valid UVV
            pressure 100 t
            chamfer lenght 3100 mm
            column daylight 2540 mm
            stroke 300 mm
            table height over floor 750 mm
            Control DNC 90
            total power requirement 8,6 kW
            weight of the machine ca. 8500 kg
            Overall size ca. 3540x1240x2555 mm
            Description :
            Machines type 391
            Machine no.: 67 39130049

            -4 controlled axes
            -crowning
            -Extended back gauge
            -pneumatic matrix displacement
            -hydraulic upper tool clamping
            -various tools
            -Tool cabinet

            extra large stroke 300mm

            -various tools

            Machine does not have a valid UVV


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses bending press LOTZE PZ 100


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3744 · bending press

          LOTZE - PZ 100 - - 1982 - DNC 73 PC

          Technical details
          pressure 100 t︱distance between columns 2540 mm︱chamfer lenght 3500 mm︱table height over floor 760 mm︱stroke 150 mm︱control DNC 73 PC ︱total power requirement 11 kW︱weight of the machine ca. 8 t︱dimensions of the machine ca. 4,1x1,7x2,9 m︱
            pressure 100 t
            distance between columns 2540 mm
            chamfer lenght 3500 mm
            table height over floor 760 mm
            stroke 150 mm
            control DNC 73 PC
            total power requirement 11 kW
            weight of the machine ca. 8 t
            dimensions of the machine ca. 4,1x1,7x2,9 m


        • WeMa Antonius Pigge GmbH
        • Barnstorfer Str. 3
        • 49424 Goldenstedt
        • Deutschland

        • Datasheet
          Request / Contact

          Coining Press - Single Column - Hydr.

          used Presses Coining Press - Single Column - Hydr. BORRIES BM 76 EL


          • EMUK GmbH Werkzeugmaschinen
          • Siemensstrasse 24 a
          • 76316 Malsch
          • Deutschland

          • +49 (0) 7246 1392
            +49 (0) 7246 1394
          • info@emuk.de
            www.emuk.de
          #1058-23141 · Coining Press - Single Column - Hydr.

          BORRIES - BM 76 EL - - 1990 -

          Technical details
          pressure ca.10 t︱throat anpassbar mm︱stroke 250 mm︱table surface area 220 x 220 mm mm︱material diameter max. ca. Ø 267 mm︱total power requirement 1,5 kW︱weight of the machine ca. 430 kg︱dimensions of the machine ca. 899 x 772 x 1520 m︱
            pressure ca.10 t
            throat anpassbar mm
            stroke 250 mm
            table surface area 220 x 220 mm mm
            material diameter max. ca. Ø 267 mm
            total power requirement 1,5 kW
            weight of the machine ca. 430 kg
            dimensions of the machine ca. 899 x 772 x 1520 m


        • EMUK GmbH Werkzeugmaschinen
        • Siemensstrasse 24 a
        • 76316 Malsch
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Coining Press - Single Column - Hydr. KUHLMANN 0656


          • G. FOLMER Industriebedarf
          • Mangenbergerstr. 347
          • 42655 Solingen
          • Deutschland

          • +49 21241071
            +49 21241276
          • folmer.maschinen@t-online.de
          #2010-811 · Coining Press - Single Column - Hydr.

          KUHLMANN - 0656 - - 1966 -

          Technical details
          throat ca. 300 mm︱stroke ca. 200 mm︱pressure capacity max. 35 t︱die cushion hydr. pressure/stroke 15 t︱total power requirement 5,6 kW︱weight of the machine ca. ca 2,5 t︱dimensions of the machine ca. 1 x 0,9 x H 2,4 m m︱
            throat ca. 300 mm
            stroke ca. 200 mm
            pressure capacity max. 35 t
            die cushion hydr. pressure/strok. 15 t
            total power requirement 5,6 kW
            weight of the machine ca. ca 2,5 t
            dimensions of the machine ca. 1 x 0,9 x H 2,4 m m


        • G. FOLMER Industriebedarf
        • Mangenbergerstr. 347
        • 42655 Solingen
        • Deutschland

        • Datasheet
          Request / Contact

          Compact Powder Press

          used Presses Compact Powder Press Sintris 11 ST2 MP


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PE335 · Compact Powder Press

          Sintris - 11 ST2 MP - - 1989 -

          Technical details
          -
          Press power: 700 - 26.000 kp Capacity: 26 T Temperature: 300 - 1.300 ° Machine dimensions lxwxh): 1.350 x 2.150 x 1.800 mm Machine weight: 1.500 kg
            -
            Description :
            Press power: 700 - 26.000 kp
            Capacity: 26 T
            Temperature: 300 - 1.300 °
            Machine dimensions lxwxh): 1.350 x 2.150 x 1.800 mm
            Machine weight: 1.500 kg



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact
          used Presses Compact Powder Press Fritsch DSP 35 D


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PE334 · Compact Powder Press

          Fritsch - DSP 35 D - - 1972 -

          Technical details
          -
          Press power: 292 - 7.100 kp Distance between columns: 420 x 360 mm Temperature: 540 - 1.400 ° Voltage: 220 V Amperage : 125 A
            -
            Description :
            Press power: 292 - 7.100 kp
            Distance between columns: 420 x 360 mm
            Temperature: 540 - 1.400 °
            Voltage: 220 V
            Amperage : 125 A



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Crank Press - Double Column

          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173051 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 2010 - Siemens S 7

          Technical details
          pressure 600 t︱distance between columns 3640 mm︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱ram surface 3600 x 2500 mm︱ram adjustment 400 mm︱band width 2000 mm︱material thickness 0,6 - 2,5 mm︱material cross-cut 1600 x 2,5 mm²︱coil weight 35,0 t︱Number of Straightening rolls 13 0︱straightening roll diameter 50 mm︱
          Blanking / Cutting Line consisting of: - mechanical double column press make Schuler type EBS 4-600, yom 1993 2010: new control Siemens S 7 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking - moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available
            pressure 600 t
            distance between columns 3640 mm
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            band width 2000 mm
            material thickness 0,6 - 2,5 mm
            material cross-cut 1600 x 2,5 mm²
            coil weight 35,0 t
            Number of Straightening rolls 13 0
            straightening roll diameter 50 mm
            Description :
            Blanking / Cutting Line consisting of:
            - mechanical double column press make Schuler type EBS 4-600, yom 1993
            2010: new control Siemens S 7
            with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking
            - moving tables (2x) without rails for the moving tables
            - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll
            - coil lifting device
            - extractor device make Schleicher
            - shear
            - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls
            - coil loop bridge
            - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994
            - blank stacker NSM-Magnettechnik
            stored in dismantled condition - Video before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column BRET 2 PACK 25 B


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-163020 · Crank Press - Double Column

          BRET - 2 PACK 25 B - - 1994 - Siemens S 5

          Technical details
          pressure 250 t︱distance between columns 1650 / 1400 mm︱stroke fix 150 mm︱no. of strokes 30 - 75 Hub/min︱dayligth (stroke and adjustment up) 665 mm︱column travel -side 550 mm︱table surface area 1600 x 900 mm︱hole in the table 1000 x 300 mm︱table height over floor 980 mm︱ram surface 1400 x 900 mm︱power requirement 42,0 kW︱weight of the machine ca. 33,00 t︱required space 2,8 x 2,5 x 4,4 m︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8) distance table - ram without tool changing system approx. 765 mm can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 250 t
            distance between columns 1650 / 1400 mm
            stroke fix 150 mm
            no. of strokes 30 - 75 Hub/min
            dayligth (stroke and adjustment . 665 mm
            column travel -side 550 mm
            table surface area 1600 x 900 mm
            hole in the table 1000 x 300 mm
            table height over floor 980 mm
            ram surface 1400 x 900 mm
            power requirement 42,0 kW
            weight of the machine ca. 33,00 t
            required space 2,8 x 2,5 x 4,4 m
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, clutch/brake combination (Ortlinghaus), tool changing system, electronic roll feed (Normatic, AESL 500-2,8)
            distance table - ram without tool changing system approx. 765 mm
            can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column SCHULER EBS 4-600-3,6-350


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-174004 · Crank Press - Double Column

          SCHULER - EBS 4-600-3,6-350 - - 1993 - Siemens S 7

          Technical details
          pressure 600 t︱stroke fix 350 mm︱no. of strokes 11 - 44 /min︱distance between columns 3640 mm︱dayligth (stroke and adjustment up) 1550 mm︱column travel -side 2200 mm︱table surface area 3600 x 2500 mm︱hole in the table mm︱die cushion capacity t︱die cushion stroke mm︱table height over floor mm︱ram surface 3600 x 2500 mm︱pressure of ram t︱stroke of drawing ram mm︱ram adjustment 400 mm︱material width mm︱material thickness mm︱material cross-cut mm²︱feed length mm︱power requirement kW︱
          with pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment moving tables (2x) without rails for the moving tables
            pressure 600 t
            stroke fix 350 mm
            no. of strokes 11 - 44 /min
            distance between columns 3640 mm
            dayligth (stroke and adjustment . 1550 mm
            column travel -side 2200 mm
            table surface area 3600 x 2500 mm
            ram surface 3600 x 2500 mm
            ram adjustment 400 mm
            Description :
            with pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            moving tables (2x) without rails for the moving tables


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN HU 2-500


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-173001 · Crank Press - Double Column

          WEINGARTEN - HU 2-500 - - 1985 - keine / Option neu

          Technical details
          pressure 500 t︱distance between columns 3100 mm︱stroke fix 300 mm︱no. of strokes 20 - 70 Hub/min︱dayligth (stroke and adjustment up) 1000 mm︱column travel -side 1400 mm︱table surface area 2800 x 1600 mm︱hole in the table mm︱table height over floor mm︱ram surface 2800 x 1450 mm︱power requirement 90,0 kW︱weight of the machine ca. 100,00 t︱required space 5,75 x 3,2 x 7,8 m︱ram adjustment 100 mm︱height over floor 6,4 mm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F
            pressure 500 t
            distance between columns 3100 mm
            stroke fix 300 mm
            no. of strokes 20 - 70 Hub/min
            dayligth (stroke and adjustment . 1000 mm
            column travel -side 1400 mm
            table surface area 2800 x 1600 mm
            ram surface 2800 x 1450 mm
            power requirement 90,0 kW
            weight of the machine ca. 100,00 t
            required space 5,75 x 3,2 x 7,8 m
            ram adjustment 100 mm
            height over floor 6,4 mm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            stored in dismantled condition in warehouse - can be offered without putting into operation (no PLC + main motor available) or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column HAULICK RVD 160-1250 R


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-093056 · Crank Press - Double Column

          HAULICK - RVD 160-1250 R - - 1983 - konventionell

          Technical details
          pressure 160 t︱stroke fix 160 mm︱no. of strokes 30 - 120 /min︱distance between columns 1190 mm︱dayligth (stroke and adjustment up) 735 mm︱column travel -side 600 mm︱table surface area 1200 x 1000 mm︱hole in the table 500 x 300 mm︱table height over floor 900 mm︱ram surface 1000 x 800 mm︱ram adjustment 125 mm︱material width 550 mm︱material thickness 0 - 6,0 mm︱material cross-cut 1100 mm²︱feed length 350 mm︱power requirement 45,0 kW︱Weight 25,0 t︱dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm︱
          permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90) can only be offered without putting into operation
            pressure 160 t
            stroke fix 160 mm
            no. of strokes 30 - 120 /min
            distance between columns 1190 mm
            dayligth (stroke and adjustment . 735 mm
            column travel -side 600 mm
            table surface area 1200 x 1000 mm
            hole in the table 500 x 300 mm
            table height over floor 900 mm
            ram surface 1000 x 800 mm
            ram adjustment 125 mm
            material width 550 mm
            material thickness 0 - 6,0 mm
            material cross-cut 1100 mm²
            feed length 350 mm
            power requirement 45,0 kW
            Weight 25,0 t
            dimensions of the machine ca. 2,3 x 2,1 x 4,7 mxmxm
            Description :
            permitted for automatic mode according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking, mechanical pincer feed (Haulick, RS 350/550 SL 90)
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES VE 100/100


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-073112 · Crank Press - Double Column

          DREES - VE 100/100 - - 1980 - konventionell

          Technical details
          pressure 100 t︱stroke 20 - 200 mm︱no. of strokes 20 - 60 /min︱distance between columns 1230 mm︱dayligth (stroke and adjustment up) 650 mm︱column travel -side 540 mm︱table surface area 1050 x 750 mm︱table height over floor 760 mm︱ram surface 1000 x 750 mm︱ram adjustment 100 mm︱power requirement 18,0 kW︱Weight 20,5 t︱dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F
            pressure 100 t
            stroke 20 - 200 mm
            no. of strokes 20 - 60 /min
            distance between columns 1230 mm
            dayligth (stroke and adjustment . 650 mm
            column travel -side 540 mm
            table surface area 1050 x 750 mm
            table height over floor 760 mm
            ram surface 1000 x 750 mm
            ram adjustment 100 mm
            power requirement 18,0 kW
            Weight 20,5 t
            dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive (PIV), pneumatic clutch, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            can be offered without putting into operation, with putting into operation or alternatively with new control Siemens S 7-1500 F


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column WEINGARTEN VK 500.34.85


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113100 · Crank Press - Double Column

          WEINGARTEN - VK 500.34.85 - - 1974 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱ram adjustment 350 mm︱height over floor 8,3 mm︱height under floor 6,0 mm︱
          with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device stored in dismantled condition can only be offered without putting into operation
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            ram adjustment 350 mm
            height over floor 8,3 mm
            height under floor 6,0 mm
            Description :
            with link drive, hydraulic overload protection in ram, motoric ram adjustment, drawing cushion in table, 2x tool changing device
            stored in dismantled condition
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column DREES ZE 500/160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083149 · Crank Press - Double Column

          DREES - ZE 500/160 - - 1973 - konventionell

          Technical details
          pressure 500 t︱distance between columns 1620 mm︱stroke 40 - 160 mm︱no. of strokes 32 / 48 Hub/min︱dayligth (stroke and adjustment up) 660 mm︱column travel -side 400 x 430 mm︱table surface area 1600 x 1300 mm︱hole in the table mm︱table height over floor 750 mm︱ram surface 1400 x 1200 mm︱power requirement 44,0 / 66,0 kW︱weight of the machine ca. 56,00 t︱required space 3,55 x 2,55 x 5,1 m︱
          with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment
            pressure 500 t
            distance between columns 1620 mm
            stroke 40 - 160 mm
            no. of strokes 32 / 48 Hub/min
            dayligth (stroke and adjustment . 660 mm
            column travel -side 400 x 430 mm
            table surface area 1600 x 1300 mm
            table height over floor 750 mm
            ram surface 1400 x 1200 mm
            power requirement 44,0 / 66,0 kW
            weight of the machine ca. 56,00 t
            required space 3,55 x 2,55 x 5,1 m
            Description :
            with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column KIESERLING & ALBRECHT PEZF 400/1250


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-023119 · Crank Press - Double Column

          KIESERLING & ALBRECHT - PEZF 400/1250 - - 1973 - konventionell

          Technical details
          pressure 400 t︱stroke fix 250 mm︱no. of strokes 45 /min︱distance between columns 1250 mm︱dayligth (stroke and adjustment up) 825 mm︱column travel -side 400 x 700 mm︱table surface area 1000 x 900 mm︱ram surface 1000 x 900 mm︱ram adjustment 100 mm︱power requirement 270,0 kW︱Weight 44,0 t︱dimensions (WxDxH) 2,4 x 3,6 x 7,2 m︱Weight 6,4 kg︱
          with ejector in table (40 t / 160 mm) can only be offered without putting into operation
            pressure 400 t
            stroke fix 250 mm
            no. of strokes 45 /min
            distance between columns 1250 mm
            dayligth (stroke and adjustment . 825 mm
            column travel -side 400 x 700 mm
            table surface area 1000 x 900 mm
            ram surface 1000 x 900 mm
            ram adjustment 100 mm
            power requirement 270,0 kW
            Weight 44,0 t
            dimensions (WxDxH) 2,4 x 3,6 x 7,2 m
            Weight 6,4 kg
            Description :
            with ejector in table (40 t / 160 mm)
            can only be offered without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Crank Press - Double Column RICHTER STZZRR 160


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-083144 · Crank Press - Double Column

          RICHTER - STZZRR 160 - - 1965 - konventionell

          Technical details
          pressure 160 t︱stroke 15 - 170 mm︱no. of strokes 15 - 40 /min︱distance between columns 2050 / 1900 mm︱dayligth (stroke and adjustment up) 690 mm︱column travel -side 800 mm︱table surface area 1600 x 800 mm︱hole in the table mm︱table height over floor 900 mm︱ram surface 1620 x 700 mm︱ram adjustment 140 mm︱power requirement 15,0 kW︱Weight 24,0 t︱dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm︱total height over floor 4,8 m︱height under floor 0,5 m︱
          permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation
            pressure 160 t
            stroke 15 - 170 mm
            no. of strokes 15 - 40 /min
            distance between columns 2050 / 1900 mm
            dayligth (stroke and adjustment . 690 mm
            column travel -side 800 mm
            table surface area 1600 x 800 mm
            table height over floor 900 mm
            ram surface 1620 x 700 mm
            ram adjustment 140 mm
            power requirement 15,0 kW
            Weight 24,0 t
            dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm
            total height over floor 4,8 m
            height under floor 0,5 m
            Description :
            permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV)
            with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Deep Drawing Press - Hydraulic

          used Presses Deep Drawing Press - Hydraulic LVD EMF-OH 300 SP


          • MW-MACHINES
          • Dorf 9
          • 4133 Hofkirchen
          • Österreich

          • +43 (0)66718068977
            -
          • info@machines-mw.at
            machines-mw.at
          #2077-50000 · Deep Drawing Press - Hydraulic

          LVD - EMF-OH 300 SP - - 1980 -

          Technical details
          pressure 300 t︱distance between columns 1600 mm︱ram stroke 500 mm︱ram surface 1500 x 900 mm︱work speed 17-61 mm/sec︱return speed 75-230 mm/sec︱die cushion hydr. pressure/stroke 50 T︱die cushion area 1250 x 800 mm︱column travel -side 470 x 500 mm︱voltage 380 V︱column daylight 800 mm︱total power requirement / kW︱weight of the machine ca. 32 t︱dimensions of the machine ca. Höhe 4,6 m︱
          4 Hydraulic swing-in cutting shock absorber
            pressure 300 t
            distance between columns 1600 mm
            ram stroke 500 mm
            ram surface 1500 x 900 mm
            work speed 17-61 mm/sec
            return speed 75-230 mm/sec
            die cushion hydr. pressure/strok. 50 T
            die cushion area 1250 x 800 mm
            column travel -side 470 x 500 mm
            voltage 380 V
            column daylight 800 mm
            total power requirement / kW
            weight of the machine ca. 32 t
            dimensions of the machine ca. Höhe 4,6 m
            Description :
            4 Hydraulic swing-in cutting shock absorber


        • MW-MACHINES
        • Dorf 9
        • 4133 Hofkirchen
        • Österreich

        • Datasheet
          Request / Contact
          used Presses Deep Drawing Press - Hydraulic SMG DS 100


          • Jansen Machinehandel BV
          • Bredaseweg 210
          • 4873 LA Etten-leur
          • Nederland

          • +31 (0) 76 5015750
          • info@jansenmachinehandel.nl
            www.jansenmachinehandel.nl
          #2049-PE079 · Deep Drawing Press - Hydraulic

          SMG - DS 100 - - -

          Technical details
          Capacity 100 T︱Table length 640 mm︱Table width 530 mm︱Speed hydr. cylinder 300 mm/sec︱Daylight 430 mm︱
            Capacity 100 T
            Table length 640 mm
            Table width 530 mm
            Speed hydr. cylinder 300 mm/sec
            Daylight 430 mm
            Description :



        • Jansen Machinehandel BV
        • Bredaseweg 210
        • 4873 LA Etten-leur
        • Nederland

        • Datasheet
          Request / Contact

          Die-Hob Press

          used Presses Die-Hob Press SACK & KIESSELBACH TP 18


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-943254 · Die-Hob Press

          SACK & KIESSELBACH - TP 18 - - 1979 - konventionell

          Technical details
          pressure 18 t︱diameter 250 mm︱stroke 150 mm︱distance between columns 210 mm︱max. distance table - ram 400 mm︱power capacity 5,5 kW︱weight of the machine ca. 1,1 t︱dimensions of the machine ca. 1,0 x 1,0 x 1,8 m︱
          hydraulic die-hob press with oil-hydraulic drive, controllable dependent on pressure/time
            pressure 18 t
            diameter 250 mm
            stroke 150 mm
            distance between columns 210 mm
            max. distance table - ram 400 mm
            power capacity 5,5 kW
            weight of the machine ca. 1,1 t
            dimensions of the machine ca. 1,0 x 1,0 x 1,8 m
            Description :
            hydraulic die-hob press
            with oil-hydraulic drive, controllable dependent on pressure/time


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses Die-Hob Press SACK & KIESSELBACH C2/Z-1250


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-223038 · Die-Hob Press

          SACK & KIESSELBACH - C2/Z-1250 - - 1966 - konventionell

          Technical details
          pressure 1250 t︱diameter 700 mm︱stroke 330 mm︱distance between columns 590 mm︱max. distance table - ram 400 mm︱power capacity 5,0 kW︱weight of the machine ca. 8,0 t︱dimensions of the machine ca. 2,3 x 1,0 x 2,0 m︱
          hydraulic die-hob press with oil-hydraulic drive, controllable dependent on pressure and way
            pressure 1250 t
            diameter 700 mm
            stroke 330 mm
            distance between columns 590 mm
            max. distance table - ram 400 mm
            power capacity 5,0 kW
            weight of the machine ca. 8,0 t
            dimensions of the machine ca. 2,3 x 1,0 x 2,0 m
            Description :
            hydraulic die-hob press
            with oil-hydraulic drive, controllable dependent on pressure and way


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          difference way press

          used Presses difference way press LEINHAAS NDDP 2UR 1000 (UVV)


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-213011V · difference way press

          LEINHAAS - NDDP 2UR 1000 (UVV) - - 1988 - Siemens S 5

          Technical details
          pressure 100 t︱distance between columns 1180 mm︱stroke 3 - 120 mm︱no. of strokes - 95 /min︱distance table/ram, stroke up 500 mm︱table surface area 1100 x 700 mm︱Hole in the table 220 x 100 mm︱table height over floor 800 mm︱side window 400 mm︱ram surface 750 x350 mm︱ram adjustment 100 mm︱Oil volume 1300 l︱power requirement 42,0 kW︱weight 10,0 t︱dimensions (WxDxH) 1,8 x 1,8 x 3,55 m︱
          permitted for manual put-in according to the German Safety Regulations (UVV) with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation with electro-hydraulic roll feed no foundation pit necessary Option additionally: decoiler Fecker (price on request) can be offered with or without putting into operation - video at seller's site before dismantling available
            pressure 100 t
            distance between columns 1180 mm
            stroke 3 - 120 mm
            no. of strokes - 95 /min
            distance table/ram, stroke up 500 mm
            table surface area 1100 x 700 mm
            Hole in the table 220 x 100 mm
            table height over floor 800 mm
            side window 400 mm
            ram surface 750 x350 mm
            ram adjustment 100 mm
            Oil volume 1300 l
            power requirement 42,0 kW
            weight 10,0 t
            dimensions (WxDxH) 1,8 x 1,8 x 3,55 m
            Description :
            permitted for manual put-in according to the German Safety Regulations (UVV)
            with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation
            with electro-hydraulic roll feed
            no foundation pit necessary
            Option additionally: decoiler Fecker (price on request)
            can be offered with or without putting into operation - video at seller's site before dismantling available


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact
          used Presses difference way press LEINHAAS DDP/R11 100 HH


          • VÖGTLE SERVICE GMBH
          • Friedhofstr. 115
          • 73054 Eislingen
          • Deutschland

          • +49 71 61 99 73- 0
            +49 71 61 99 73- 13
          • Thomas.Ruckh@voegtle.de
            www.voegtle.de
          #1050-113080 · difference way press

          LEINHAAS - DDP/R11 100 HH - - 1988 - Siemens S 5

          Technical details
          pressure 100 t︱distance between columns 1180 mm︱stroke 1 - 120 mm︱no. of strokes 90 /min︱distance table/ram, stroke up 470 mm︱table surface area 1100 x 700 mm︱table height over floor 800 mm︱side window 400 mm︱ram surface 740 x 350 mm︱ram adjustment 100 mm︱power requirement 37,0 kW︱weight 11,0 t︱dimensions (WxDxH) 2,3 x 2,0 x 3,5 m︱
          difference-way press with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation T-slots in table and ram according to customer's specification - price on request No foundation pit necessary can be offered with or without putting into operation
            pressure 100 t
            distance between columns 1180 mm
            stroke 1 - 120 mm
            no. of strokes 90 /min
            distance table/ram, stroke up 470 mm
            table surface area 1100 x 700 mm
            table height over floor 800 mm
            side window 400 mm
            ram surface 740 x 350 mm
            ram adjustment 100 mm
            power requirement 37,0 kW
            weight 11,0 t
            dimensions (WxDxH) 2,3 x 2,0 x 3,5 m
            Description :
            difference-way press
            with hydraulic driven knuckle-joint system, controllable dependent on pressure and way, two-hand operation
            T-slots in table and ram according to customer's specification - price on request
            No foundation pit necessary
            can be offered with or without putting into operation


        • VÖGTLE SERVICE GMBH
        • Friedhofstr. 115
        • 73054 Eislingen
        • Deutschland

        • Datasheet
          Request / Contact

          Double Column Drawing Press - Hydraulic

          used Presses Double Column Drawing Press - Hydraulic LAUFFER RKP 140


          • Pressen HAAS GmbH
          • Kreuzsteig 6
          • 72479 Straßberg
          • Deutschland

          • +49 7574 59 97 59
            +49 7574 92 17 24
          • info@pressen-haas.de
            www.pressen-haas.de
          #2053-0454 · Double Column Drawing Press - Hydraulic

          LAUFFER - RKP 140 - - 2006 -

          Technical details
          Pressure total 140 t︱Stroke 800 mm︱Daylight 1.000 mm︱Free frontal opening L-R 2.000 mm︱Table surface area 2.000 x 550 mm︱Return speed 230 mm / s︱Weight of machine approx. 14 t︱
            Pressure total 140 t
            Stroke 800 mm
            Daylight 1.000 mm
            Free frontal opening L-R 2.000 mm
            Table surface area 2.000 x 550 mm
            Return speed 230 mm / s
            Weight of machine approx. 14 t


        • Pressen HAAS GmbH
        • Kreuzsteig 6
        • 72479 Straßberg
        • Deutschland

        • Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          • 6  
          •   
          •   


          Find the perfect presses for your needs at LagerMaschinen
          Presses are multi-function tools for home or business

          The umbrella term press encompasses a wide range of different machines with an enormous array of functions. Presses can be used for the shaping, cutting, and punching of a variety of different materials. Whether youre in the market for a small manually-operated press for your home workshop or a massive industrial press for your business, you can easily find the most suitable machine for your specifications quickly and easily using LagerMaschinens online marketplace of used machines.

          Find the right used machines for you at LagerMaschinen

          From the publishing industry to the automotive sector, presses play a crucial role in the forming and finishing of products. Presses can be used to shape heavy material, imprint papers and plastic or cut and form metal, such as in coin production. For control and precision, look for used manually-operated presses. For mass-production, CNC operated presses offer quality and efficiency. No matter what your needs are, you can find used presses and more at LagerMaschinen.

          Investing in used machines is a business-savvy plan

          Buying used machines is a practical solution to the budgetary woes of buying equipment for your home or business. When you invest in used machines you get the quality you demand as a price you can afford. The machine marketplace offered by LagerMaschinen is a user-friendly forum for buying and selling used machines. Presses, lathes, grinders and more can be searched for and filtered by location, price or brand, ensuring a hassle-free shopping process from the comfort of your home or office.