Travelling column milling machine

x-travel 18000 mm︱y-travel 2500 mm︱z-travel 1250 mm︱spindle motor 31 kW︱spindle turning speed range 10 - 10000 U/min︱spindle taper: HSK A 80 ︱number of tools 104 ︱ A-Achse +100/-90︱c-axis +/- 200 °︱feeds 1 - 16000 mm/min︱rapid traverse: 16 m/min︱weight of the machine ca. 66 t︱total power requirement 65 kW︱dimensions of the machine ca. 25,5 x 10,0 x 5,2 m︱

---

Machine equiped with SIEMENS 840 D control for 5 axis - NC 2-axis fork type milling head - BALLUF tool identification system - MARPOSS measuring device - tool changer for 104 tools - hand operating panel, exhauster

x-travel 18000 mm︱y-travel 2500 mm︱z-travel 1250 mm︱Control SIEMENS-SINUMERK 840 D ︱spindle taper HSK-A 80 ︱spindle turning speed range 10 - 10000 U/min︱feeds longditudinal/cross/vertical 1 - 16000 mm/min︱drive milling spindle 31 kW︱total power requirement 65 kW︱weight of the machine ca. 0 t︱dimensions of the machine ca. 25,5 x 10 x 5,2 m︱

---

* spindle on appr. 13,721 h * CNC-control in 5 axis by SIEMENS SINUMERIK 840 D * CNC universal milling head A-axis = +-90° - C-axis = 400° (+200/-200°) * 52-fold tool changer

x-travel mm︱y-travel mm︱z-travel mm︱total power requirement kW︱weight of the machine ca. t︱required space m︱

---

7000 mm︱ 1350 mm︱ 2300 mm︱ 50 DIN 69871 ︱ 0-4000 U/min︱

---

7000 mm︱ 1350 mm︱ 2300 mm︱ 50 DIN 69871 ︱ 0-4000 U/min︱feeds 10000 mm/min︱rapid traverse 25 m/min︱

---

x-travel 3500 mm︱y-travel 1083 mm︱z-travel 1074 mm︱control HEIDENHAIN iTNC 530 HSCI ︱clamping table - ︱surface area 4.000 x 1.000 mm︱Thread bore with fitting - ︱Feeds - ︱X-, Y- and Z-axis, stepless 2 - 30.000 mm/min︱rapid travel x/y/z 30 m/min︱Max. feed force of axis 10.000 N︱2-axis Milling Head - ︱2-axis milling head TUB-E92 with power on - ︱Torque-Motors for 5-axis-simultaneos processing - ︱capacity at 100% load 29 kW︱Speed stepless 2- 30.000 ︱max. torque 92 Nm︱Max. torque 60 min-1︱tool taper HSK 62A-DIN 69893 ︱automatic tool changer ATC - ︱

---

Guides, drive and measuring systems • All axis drives with digital drives manufacturer HEIDENHAIN • Direct measuring systems for X,Y, and Z axis manufacturer HEIDENHAIN • X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics • Precision ball screw with preloaded nuts in X-, Y- and Z-axis Coolant Equipment with Chip conveyor • Coolant outlet, switchable from coolant to air, at the front of the milling head via manually swivelling nozzles • Internal coolant supply, switchable from coolant to air, through the spindle centre. • Tank volume approx. 1.000 l • Normal coolant supply 25l/min 5 bar • High pressure pump for internal cooling 20 l/min 50 bar • Coolant tank incl. Cartridge filter and paper-belt filter system • Hinged belt chip conveyor, discharge height approx. 750 mm Equipment • Machine bed, column and vertical saddle as welded steel construction, annealed with low tension • Milling slider as welded steel construction • Orthogonal milling head TUB-E92 with motor spindle, C- and A-axis drive via torque motors • Oil cooling unit for cooling the milling head • CNC thermal compensation • Spindle drive 29 kW • Spindle speed max. 18.000 min-1 • Axle drives by means of precision ball screws and digital servo motors • Touch probe system manufacturer BLUM, TC 63-30 with radio transmission and automatic measuring cycles • Milling head Measurement “Kinematics Opt” • Laser tool presetter BLUM - NT version mounted on machine table • CNC control HEIDENHAIN iTNC 530 HSCI incl. digital drive technology • Portable electronic handwheel HEIDENHAIN HR 520 with 3 m spiral cable • swivelling control panel for machine operation in front of the machine • Automatic tool changer with 30 magazine places, change position vertical • Coolant system with external shower rim and IKZ through the spindle • 1 chip conveyor in the working area, ejection right • Pretensioned linear guides in all axes • Precision ball screws in all axes • Hydraulic weight compensation in the vertical axis • Bellows cover of the X-axis • Milling slide above and below in the vertical axis with bellows covers with attached stainless steel lamellas closed • Work area enclosure closed on all sides. Back side of the work area with bellows cover with attached stainless steel lamellas closed. The manual sliding doors on the front of the machine can be opened and closed over the entire length of the table. Safety fencing for the back machine area with two secured access doors.

x-travel 2500 mm︱y-travel 2000 mm︱z-travel 2000 mm︱control Siemens 840D ︱Size of table plate 1500x2000 mm︱table load 12 t︱solution 0.0005 Grad︱Rotating speeds 5 U/min︱spindle drive ︱output 34 kW︱Speed range - up to 400-5000 U/min︱max. torque 830 Nm︱tool magazin: 24 Plätze ︱taper ISO 50 DIN 69871 ︱max. diameter 125-230 mm︱tool length - max. 400 mm︱Payload 20 kg︱coolant ︱Capacity 28 l/min︱0 4 bar︱

---

Equipment/ Accessories: - only 8821 working hours The structure of the TERUS cross moving-column machining centre consists of an electro-welded steel construction. The table bed, which can be moved in the longitudinal direction, and the column bed, which can be moved in the cross direction, consist of an electro-welded steel construction. The carriage is made of electro-welded steel to ensure maximum rigidity. The turntable or pallet carrier substructure is made of Meehanite cast GB/300. X, Y and Z axes on hardened and ground linear guides. The turntable or pallet carrier rests on a hydrostatic bearing ring. Machine diagnostic system and diagnostic software system. Other important details are: - max. permissible tilting moment: 87000 Nm - max. working torque: 45000 Nm - Semi-automatic accessory changing system: 34 kW - Shopmill option - infinitely positionable universal head: automatic, double pivoting - Tapping without compensating chuck for mechanical milling heads - Static RTCP in space - Static RTCP for rotary variable tables: This software allows the programming of machining in any position that can be reached by the milling head, without zero offset. The RTCP-TR is also useful for editing with inclined, spherical tool, with continuous head and table movements in all directions. - Chain tool magazine 40 places ISO50 mounted on the floor - Arm for changing the tool in horizontal spindle position - With internal compressed air supply as an alternative to coolant - Wireless probe: Renishaw RMP 60 - Teleservice (remote diagnosis)

x-travel 14.000 mm︱y-travel 1.500 mm︱z-travel 3.000 mm︱Control Heidenhain Itnc 530 ︱total power requirement 50 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour

x-travel 3.600 mm︱y-travel 1.100 mm︱z-travel 900 mm︱control HEIDENHAIN iTNC 530 ︱total power requirement 80 kVA︱weight of the machine ca. 31,05 t︱dimensions of the machine ca. 10,0 x 6,0 x 3,2 m︱

---

5-axis simultaneous travelling column machining center / Brand: DECKEL MAHO / Type: DMF 360 / Year of construction: 2011 With integrated rotary table, - swivelling head B-axis. The machine can be inspected by appointment in operation. Operating hours (27.07.2022: - Switch-on hours: 48.582 h - Spindle hours: 19.616 h - Tool changer: 2.225 h TECHNICAL SPECIFICATIONS: Control: HEIDENHAIN iTNC 530 Travels: - X-axis: 3.600 mm - Y-axis: 1.100 mm - Z-axis: 900 mm Main spindle: - Speed range: 20 - 18.000 rpm - Drive power (40/100 % ED): 35/25 kW - Torque max. (40/100 % ED): 130/87 Nm - Universal milling head with controlled B-axis - Swivelling: +/- 100° (degree) Working table: - Table clamping surface: 4.200 x 1.100 mm - Table load max.: 5 tons - T-Slots: 11 x 18H7 x 100 - Rotary table diameter: 1.050 mm - Rotary table speeds max.: 725 rpm - Table load max.: 1,2 tons Tool changer: - Number of tool positions: 120 - Tool holder: SK 40, DIN 69871 - Tool weight max.: 6,0 kg - Tool diameter max.: 80/(130) mm - Tool length max.: 300 mm - Changeover time chip-chip approx.: 9,0 sec Feeds: - Rapid traverse (X/Y/Z): 40 m/min - Feed rate max.: 40.000 mm/min - Speed-up: 4 m/s2 - Total power requirement: 80 kVA - Machine weight approx.: 31,05 t - Space requirement approx.: 10,0 x 6,0 x 3,2 m EQUIPMENT: - Internal coolant supply - Chip conveyor - Coolant device - High-pressure cooling, 40 bar - Measuring probe, Brand: HEIDENHAIN TS 649 - 3D quickSET: Interface only - Electronic hand wheel - Partition wall - Signal lamp - 4 colours - Rotational sight glass - Rinsing gun - Oil mist extraction system - Operating mode 4 - Documentation - CE marking Sold WITHOUT clamping devices. There is no guarantee for correctness and completeness of the technical details and accessories.

x-travel 2500 mm︱y-travel 920 mm︱z-travel 820 mm︱Control Heidenhain iTNC 530 ︱weight of the machine ca. 24.500 kg︱dimensions of the machine ca. 6500 x 9300 x 3267 mm︱

---

- Table size: 3100 x 900 mm - 30-fold tool changer - Tool holder: SK50 - spindle speed: max. 10.000 rpm - Chip conveyor make DMG - Collision monitoring system make Brankamp - Measuring probe M+H - Partition wall for pendulum machining - incl. 50 tool holders SK50

x-travel 6000 mm︱y-travel 2100 mm︱z-travel 1500 mm︱Controls HEIDENHAIN iTNC 530 ︱----------------------------------- ︱BASIC DESIGN . ︱ - basic design : travelling column . ︱WORKING RANGE -MILLING- . ︱ - x-axis traverse 6000 mm︱ - y-axis traverse 2100 mm︱ - z-axis traverse 1500 mm︱FLOOR PLATE . ︱ - clamping surface (left-right) 7000 mm︱ - clamping surface (front-back) 2000 mm︱WORKING SPINDLE / HEAD . ︱ - spindle type : orthogonal head . ︱ - tilting range 360 °︱ - - mode of operation : automatic . ︱ - - positioning/indexing 1 °︱ - tilting range (2nd axis) 270 °︱

---

Technical description : Traveling column milling machine with Heidenhain TNC530 control, coolant system, chip conveyor and floor plate area 7000 mm length and by 2000 mm width. - NOTE: The clamping table, the clamping angle, are NOT included in the scope of delivery. Those optionals can be purchased separately at following EXW ex works prices ANGLE PLATE Euro 5.000,-- PER UNIT CUBE FOR CLAMPING EURO 2.000,-- WORKBENCH & TOOLINGS Euro 2.000,--

x-travel 6000 mm︱y-travel 2100 mm︱z-travel 1500 mm︱control HEIDENHAIN iTNC 530 ︱feed 2- 20 m/min︱spindle turning speed range 20 -4000 U/min︱table dimension - longitudinal 7000 mm︱table dimension - cross 2000 mm︱total power requirement 79 kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. 15 x 7 x 4,6 m︱

---

The SORALUCE FP6000 is in very good condition. accessories as option: # clamping angle: 5'000.-€ # Clamping cube: 2'000.-€ # Div. tools & workbench: 2'000.-€ Description: - CNC control: HEIDENHAIN ITNC 530 Orthogonal milling head: - Tool holder: ISO 50, DIN69871 AD - Automatic tool clamping: Clamping force 20,000 N - Indexing accuracy / repeatability: ± 3 sec. == ± 0.002 mm - Tightening bolt: DIN 69872 form A - Number of swivel positions: 1 x 1 ° milling head ( 360 positions rear plane, 270 positions front plane) 270 positions front plane) - Diameter spindle bearing: 90 - Sealing air: 0,7 bar Main drive: - Drive type: three-phase motor - Drive power: 100 % ED 32 kW spindle: - Spindle speed: 20 - 4000 rpm - Full power from: 340 rpm - Torque at 32 kW/S1: 910 Nm - Speed control: 2 ranges infinitely variable via star/delta connection Rapid traverse: max. 35000 mm/min

x-travel 8.000 mm︱y-travel 2.000 mm︱z-travel 1.200 mm︱Control iTNC 530 ︱table-size 10.000 x 1.100 mm︱power requirement 100 % ED , 30 kW︱number of spindle speeds 20 - 4000 U/min/rpm︱feed range 2 - 12000 mm/min︱rapid travel x/y/z 25.000 mm/min︱tool taper DIN 69871 Form AD ISO 50︱milling head -swivable +/- 2 Ebenen mit 2,5 x 2,5 °︱tool change unit 60 Magazinplätzen ︱Internal cooling system 3/8 bar︱Chip coveyor Bauform Scharnierband ︱handwheel HR- 410 ︱operating hours 48.750 h︱Machine on 46.457 h︱Program on 17.813 h︱weight of the machine ca. 30,6 t︱dimensions of the machine ca. m︱

---

CNC fixed-bed milling and drilling center SP 10,000 with HEIDENHAIN iTNC control 530 FURNISHING: - HEIDENHAIN control iTNC 530 - Drive power 30 kW with 2-stage ZF gearbox with a torque of 1140 Nm including oil cooling. - Automatically indexing milling head 2 planes with 2.5° x 2.5° division, 4,000 rpm , Air cooling / oil mist lubrication. - Cooling lubricant system variant 2, with outlet via Shower rim and internal coolant supply DIN 69871 form AD, tank volume 500 l + 250 l lifting tank with pump, flow rate 50 l/min, delivery pressure 3/8 bar. - Automatic tool changer - Chain changer system with 60 magazine places, including horizontal / vertical Switch. - Chip conveyor, hinged belt design. - M & H radio measuring probe system for measuring and aligning workpieces. - Measuring station TT 130 for measuring tools: - Machine control on longitudinally traveling Mounted operator platform. - Electronic handwheel HR 410. - Digital drive technology. - Siemens drive motors. - INA linear roller guide system type RUE 55 am X axis machine table and prismatic Flat guide with INA recirculating roller elements for the support rail. - INA linear roller guides type RUE 55 in the Y and Z axis.

x-travel 5.300 mm︱y-travel 1.500 mm︱z-travel 2.000 mm︱surface area 6.000 x 1.200 mm︱table height 925 mm︱feeds 10 - 6.000 mm/min︱rapid traverse X- and Y-axis 15.000 mm/min︱rapid traverse Z-axis 10.000 mm/min︱a-axis +45 bis -225 °︱b-axis +165 bis -180 °︱power capacity 28 (S1) kW︱power capacity 38 (S2) kW︱Torque 1.880 (S1) Nm︱Torque 1.385 (S2) Nm︱turning speed range 60 - 5.000 U/min︱clamping capacity max. 8.000 kg︱external spindle dia. in forward position 140 mm︱spindle diameter in front bearing 90 mm︱taper SK 50 DIN 69871 ︱Bolt DIN 69872-B ︱

---

Überholt 2021 • Complete cleaning of the machine. • Dismantling the complete machine. • Check hydraulic components • Checking the lubrication systems. • Mechanical check of the X axis. (Repair of the spindle + bearing replacement + belt). • Mechanical check of the Y-axis. (Repair of the spindle + bearing replacement + belt). • Mechanical check of the Z-axis (repair of the spindle + bearing replacement + belt). • Milling head check (everything OK), repaired by the seller. • Inspection + repair of the X-axis telescopic cover. • Checking the control cabinet • Replacement of control panel. • Test of all functionalities. • Replacement of the polycarbonate doors. • Painted with original paint • Adjustment of the machine with LASER RENISHAW • Adjustment BALBAR RENISHAW • General review of all components.

CNC brand Heidenhain ︱Table length 5000 mm︱Table width 2000 mm︱X 5000 mm︱Y 3100 mm︱Z 1200 mm︱Spindle taper HSK 63 ︱Speed 18000 RPM︱Tool changer 24 ︱Distance between columns 2800 mm︱Machine dimensions (lxwxh) 15000 x 6200 x 6000 mm︱Machine weight 65000 kg︱

---

5-axis machine

x-travel 4.000 mm︱y-travel 1.500 mm︱z-travel 1.500 mm︱Control Heidenhain iTNC 530 ︱taper ISO ISO50 DIN 69871 ︱turning speeds 4.000 U/min︱Internal cooling system 21 bar︱table-size 4.200x1.100 mm︱Tools changer autom. ︱Chip coveyor 2x ︱number of tools 40 ︱turning speeds 3.000-20.000 U/min︱milling head -swivable +/- je 1° / 2,5°, B+ C °︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

-Milling capacity= 1,200mm -Automatic milling head: index each 1° / 2.5°, B + C axis (overhauled after manufacturer specification) -Additional tank for cooling lubrication system with paper filter –Longitudinal hinge -Chain magazine -Total tools: 40 (of which 5 pieces HSK 50) -Control panel mounted on the hall floor, -Swivel range up to the middle of the table

x-travel 2600 mm︱y-travel 700 mm︱z-travel 800 mm︱Control Heidenhain TNC 530 ︱Main spindle: ︱turning speed range - main spindle 6000 min/-1︱power capacity - main spindel 17 kW︱swivellable -90 / +90 (2,5°) °︱tool taper HSK 63 ︱table diameter 3060 x 800 mm︱max. table load max. 800 kg︱Tool-Presetter: ︱number of toolpositions 44 pos.︱tool taper HSK 63 ︱feeds: ︱rapid traverse ( X / Y / Z ) 25 / 25 / 20 m/min︱total power requirement 55 KVA︱weight of the machine ca. - t︱dimensions of the machine ca. 6,5 x 3 x 3,4 m︱

---

equipped with: - CNC control Heidnehain TNC 530 - NC swivel head (B-Axis) - tool changer 44-fold (HSK 63) - Coolant system - central lubrication - chip conveyor

x-travel 10500 mm︱y-travel 2750 mm︱y-travel (3350) mm︱z-travel 1500 mm︱turning speeds 3500 U/min︱Tool changer 80 ︱Control Heidenhain TNC 430 M︱positioning accuracy 1 °︱milling-head swivable +/- CNC ︱Plate area 12000x2500 mm︱chip conveyor ︱spindle taper ISO 50 ︱Spindle capacity 37 KW︱Feed 6000 mm/min︱Rapid movement 15000 mm/min︱total power requirement kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 18,1x6,7 m︱

---

CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500

x-travel 10500 mm︱y-travel 2750 mm︱y-travel (3350) mm︱z-travel 1500 mm︱turning speeds 3500 U/min︱Tool changer 80 ︱Control Heidenhain TNC 430 M︱positioning accuracy 1 °︱milling-head swivable +/- CNC ︱Plate area 12000x2500 mm︱chip conveyor ︱spindle taper ISO 50 ︱Spindle capacity 37 KW︱Feed 6000 mm/min︱Rapid movement 15000 mm/min︱total power requirement kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 18,1x6,7 m︱

---

CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500

x-travel 16300 mm︱y-travel 2600 mm︱z-travel 1600 mm︱Control Heidenhain ︱type TNC 430 ︱tool taper ISO 50 ︱spindle turning speed range 22-4000 U/min︱feed in x - axis 36000 mm/min︱feed in y - axis 24000 mm/min︱feed range Z-direction 24000 mm/min︱main drive motor 37 kW︱Tool changer 90 ︱coolant ︱ ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 16000 mm︱y-travel 1500 mm︱z-travel 3500 mm︱spindle turning speed - stepless 4000 U/min︱spindle taper ISO 50 ︱spindle motor 46 kW︱feeds longditudinal/cross/vertical 6000 mm/min︱rapid motion -longitudinal/cross/vertical 15 m/min︱no. of tools in the magazine 60 Stück︱control HEIDENHAIN TNC 426 M︱total power requirement - kW︱weight of the machine ca. - t︱

---

- CNC control HEIDENHAIN TNC 426 M - Automatic head 144 x 144 positions. - ISO 50 - Spindle extension L600 - ATC 60 positions - Spindle cooling (internal) 20 bar - Workpiece probe - Laser scanning of tools - Chip conveyor - Hydrostatic in x/y/z/a There are no tables

x-travel 8000 mm︱y-travel 1000 mm︱z-travel 1250 mm︱dividing head CNC ︱chip conveyor ︱Universal angular milling head 2-axis adjustable ︱control Fagor ︱type 8025 ︱ CNC ︱clamping plate 1500x3000 mm︱clamping plate 1500x4000 mm︱clamping plate 1500x4000 mm︱taper ISO 50 P.D.B. ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 8000 mm︱y-travel 1000 mm︱z-travel 1250 mm︱dividing head CNC ︱chip conveyor ︱Universal angular milling head 2-axis adjustable ︱control Fagor ︱type 8025 ︱ CNC ︱clamping plate 1500x3000 mm︱clamping plate 1500x4000 mm︱clamping plate 1500x4000 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

x-travel 8000 mm︱y-travel 1200 mm︱z-travel 2000 mm︱turning speeds 235 - 5000 U/min︱spindle drive 27,5 - 37,4 kW︱total power requirement 63 kW︱control Heidenhain ︱feeds 15000 mm/min︱rapid feed ca. 41 mm/min︱tool holder SK50 ︱weight of the machine ca. / t︱required space 9 x 5 x 10 m︱

---

The scope of delivery also includes: - Documentation (electrical, hydraulic and pneumatic plan) - Floor plan - machine drawings - all keys belonging to the machine (cabin, housing, Processing head, ...) - With regard to the head, both bodies can be swiveled through 360 °. This allows the machine to process 4 sides. (Vertical to Z- / Horizontal to Y- / Horizontal to X- / Horizontal to X + ) Total operating hours: 26922 h