European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Planer-Type Milling M-C - Double Column

          Machinelist: Planer-Type Milling M/C - Double Column


          Planer-Type Milling M/C - Double Column

          used Milling machines Planer-Type Milling M/C - Double Column BÖHRINGER FZ 31 /1800


          • IVW GMBH
          • Niederrheinstr.298
          • 40489 Düsseldorf
          • Deutschland

          • (0049)211-4184428
            (0049)211-4184430
          • cd@ivwgmbh.com
            www.ivwgmbh.com
          #1088-E00819 · Planer-Type Milling M/C - Double Column

          BÖHRINGER - FZ 31 /1800 - - ca.1980 -

          Technical details
          x-travel 1800 mm︱y-travel 800 mm︱z-travel 500 mm︱total power requirement 55 kW︱weight of the machine ca. 55 t︱dimensions of the machine ca. 3 x 8 x 3 m︱
            x-travel 1800 mm
            y-travel 800 mm
            z-travel 500 mm
            total power requirement 55 kW
            weight of the machine ca. 55 t
            dimensions of the machine ca. 3 x 8 x 3 m
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH COBURG 17-10 FP 225


          • Walter Kames GmbH
          • Dillenburger Weg 34
          • 40229 Düsseldorf
          • Deutschland

          • +49 211 215066 0
            +49 211 215067
          • info@kames.de
            www.kames.de
          #1004-09949 · Planer-Type Milling M/C - Double Column

          WALDRICH COBURG - 17-10 FP 225 - - 85/2003 - SIEMENS 840D

          Technical details
          x-travel 6600 mm︱y-travel 3200 mm︱z-travel 1000 mm︱w-axis 1750 mm︱spindle motor 55 kW︱spindle turning speed range 5 - 2000 U/min︱spindle taper ISO 60 ︱spindle diameter in front bearing 170 mm︱table lenght 1 + 2 6400 mm︱table width 2250 mm︱daylight between the side columns 2650 mm︱table load 50 t︱no. of tools in the magazine 60 Stück︱distance spindle nose and table 2500 mm︱control SIEMENS 840D ︱feed range - table 10 - 15000 mm/min︱feeds crossrail-slide horizontal 10 - 10000 mm/min︱feed in w - axe 10 - 2000 mm/min︱total power requirement 85 kW︱weight of the machine ca. 125 t︱
          Machine general overhauled and equipped with SIEMENS 840 D control in 2003 - new digital motors, drive controllers, measuring systems and switch cabinet - tool changer for 60 tools (45 ISO 50, 15 ISO 60) - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90° indexing - hydrostatic table guideways - adjustable crossrail - 2 tables coupled - chip conveyor - coolant device
            x-travel 6600 mm
            y-travel 3200 mm
            z-travel 1000 mm
            w-axis 1750 mm
            spindle motor 55 kW
            spindle turning speed range 5 - 2000 U/min
            spindle taper ISO 60
            spindle diameter in front bearin. 170 mm
            table lenght 1 + 2 6400 mm
            table width 2250 mm
            daylight between the side column. 2650 mm
            table load 50 t
            no. of tools in the magazine 60 Stück
            distance spindle nose and table 2500 mm
            control SIEMENS 840D
            feed range - table 10 - 15000 mm/min
            feeds crossrail-slide horizontal 10 - 10000 mm/min
            feed in w - axe 10 - 2000 mm/min
            total power requirement 85 kW
            weight of the machine ca. 125 t
            Description :
            Machine general overhauled and equipped with SIEMENS 840 D control in 2003

            - new digital motors, drive controllers, measuring systems and switch cabinet
            - tool changer for 60 tools (45 ISO 50, 15 ISO 60)
            - 3 angular milling heads (HSD 175, WFD 800) with service device 4 x 90°
            indexing
            - hydrostatic table guideways
            - adjustable crossrail
            - 2 tables coupled
            - chip conveyor
            - coolant device
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column REICHLE & KNOEDLER


          • Meister Maschinen
          • Overhagener Weg 44
          • 59597 Erwitte
          • Deutschland

          • +49 (0) 2943-870946
            +49 (0) 2943-870885
          • info@meister-maschinen.com
            www.meister-maschinen.com
          #2005-102011 · Planer-Type Milling M/C - Double Column

          REICHLE & KNOEDLER - - - 79/99 - konventionell

          Technical details
          x-travel 2650 mm︱y-travel 1270 mm︱z-travel 1000 mm︱total power requirement kW︱weight of the machine ca. 25 t︱required space m︱
            x-travel 2650 mm
            y-travel 1270 mm
            z-travel 1000 mm
            weight of the machine ca. 25 t
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column OPTIMUM OPTImill FP 4200


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-8709 · Planer-Type Milling M/C - Double Column

          OPTIMUM - OPTImill FP 4200 - - 2020 - Sinumerik 828D Siemens

          Technical details
          x-travel 4.200 mm︱y-travel 1.400 mm︱z-travel 850 mm︱control Sinumerik 828D Siemens︱Main spindle: ︱turning speed range - main spindle max. 8.000 min/-1︱power capacity - main spindel 18,5 / 15 kW︱transmission ratio 2 ︱max. Torque - Nm︱tool taper ISO 50 ︱work table: ︱table surface area 3.200 x 1.200 mm︱max. table load 8.000 kg︱T-slots 7x 22 x 150 mm︱distance spindle /table 50 - 900 mm︱distance between columns 1.400 mm︱distance spindle / column max. 404 mm︱Tool-Presetter: ︱number of toolpositions 32 pos.︱tool taper ISO 50
          CNC-Travel-Column-Milling Machine OPTIMUM - OPTImill FP 4200 - NEW MACHINE / SHOW-ROOM-MACHINE - Price is Basic-Price, Oprtions available for surcharge - alternative configuration available, optional and on request !
            x-travel 4.200 mm
            y-travel 1.400 mm
            z-travel 850 mm
            control Sinumerik 828D Siemens
            turning speed range - main spind. max. 8.000 min/-1
            power capacity - main spindel 18,5 / 15 kW
            transmission ratio 2
            max. Torque - Nm
            tool taper ISO 50
            table surface area 3.200 x 1.200 mm
            max. table load 8.000 kg
            T-slots 7x 22 x 150 mm
            distance spindle /table 50 - 900 mm
            distance between columns 1.400 mm
            distance spindle / column max. 404 mm
            number of toolpositions 32 pos.
            tool taper ISO 50
            Description :
            CNC-Travel-Column-Milling Machine
            OPTIMUM - OPTImill FP 4200

            - NEW MACHINE / SHOW-ROOM-MACHINE
            - Price is Basic-Price, Oprtions available for surcharge

            - alternative configuration available, optional and on request !
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column MATTEC X-X-X


          • Stiens Werkzeugmaschinen GmbH
          • Mittelweg 92
          • 59302 Oelde
          • Deutschland

          • +49 252283490
            (0049) - 2522 - 8349-20
          • info@stiens.de
            www.stiens.de
          #1039-5302 · Planer-Type Milling M/C - Double Column

          MATTEC - X-X-X - - 2019 - (Heidenhain/Siemens/ Fanuc)

          Technical details
          x-travel (5.000 - 40.000) mm︱y-travel (1.000 - 4.500) mm︱z-travel (1.000 - 1.600) mm︱control (Heidenhain/Siemens/ Fanuc)︱Main spindle: ︱turning speed range - main spindle (- 5.000) min/-1︱power capacity - main spindel (- 30) kW︱max. Torque (350) Nm︱tool taper (SK 50/SK 40) ︱swivellable (+/- 90) °︱Tool changer (25 - 380) pos.︱rapid traverse (20) m/min︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          CNC - Planer-Type Milling MC - Double Column MATTEC - X-X-X Machines, individual configurable due to your requirements and local situation. The construction and environment of these plants will be done in expandable modules, what will be a garanty for a high level of flexibility in any respect. Every single plant will be constructed in reconciliation and collaboration with the customer. German High-Level-Machine-Engineering! Please get in contact with us for more information! We will help you to realize your optimized and individual solution!
            x-travel (5.000 - 40.000) mm
            y-travel (1.000 - 4.500) mm
            z-travel (1.000 - 1.600) mm
            control (Heidenhain/Siemens/ Fanuc)
            turning speed range - main spind. (- 5.000) min/-1
            power capacity - main spindel (- 30) kW
            max. Torque (350) Nm
            tool taper (SK 50/SK 40)
            swivellable (+/- 90) °
            Tool changer (25 - 380) pos.
            rapid traverse (20) m/min
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            CNC - Planer-Type Milling MC - Double Column
            MATTEC - X-X-X

            Machines, individual configurable due to your requirements and local situation.
            The construction and environment of these plants will be done in expandable
            modules, what will be a garanty for a high level of flexibility in any respect.
            Every single plant will be constructed in reconciliation and collaboration with
            the customer.

            German High-Level-Machine-Engineering!

            Please get in contact with us for more information!
            We will help you to realize your optimized and individual solution!
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column MITSUBISHI MVR 40Ex


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18562 · Planer-Type Milling M/C - Double Column

          MITSUBISHI - MVR 40Ex - - 2019 - Fanuc 31i-MB

          Technical details
          x-travel 6000 mm︱y-travel 4000 mm︱z-travel 800 mm︱w-axis 1300 mm︱Main spindle: ︱turning speed range - main spindle 20 - 8000 min/-1︱power capacity - main spindel 22 / 30 kW︱tool taper ISO 50 ︱work table: ︱table surface area 6000 x 3000 mm︱max. workpiece weight 30 t︱column daylight 3750 mm︱Tool-Presetter: ︱number of toolpositions 60 pos.︱tool taper ISO 50 ︱feeds: 1 -10000 mm/min︱rapid traverse ( X / Y / Z ) 20/22/15 m/min︱rapid traverse W: 5 m/min︱control Fanuc 31i-MB ︱ram head dimension 350 x 350 mm︱
          Double-column, 5-face milling machine equipped with: - CNC control Fanuc 31i-MB - Automatic Head Changer and Right Angle Head Standard - 5 Face Machining Software Standard - Rigid Heavy Cutting Design - ATC 60-fold
            x-travel 6000 mm
            y-travel 4000 mm
            z-travel 800 mm
            w-axis 1300 mm
            turning speed range - main spind. 20 - 8000 min/-1
            power capacity - main spindel 22 / 30 kW
            tool taper ISO 50
            table surface area 6000 x 3000 mm
            max. workpiece weight 30 t
            column daylight 3750 mm
            number of toolpositions 60 pos.
            tool taper ISO 50
            feeds: 1 -10000 mm/min
            rapid traverse ( X / Y / Z ) 20/22/15 m/min
            rapid traverse W: 5 m/min
            control Fanuc 31i-MB
            ram head dimension 350 x 350 mm
            Description :
            Double-column, 5-face milling machine equipped with:
            - CNC control Fanuc 31i-MB
            - Automatic Head Changer and Right Angle Head Standard
            - 5 Face Machining Software Standard
            - Rigid Heavy Cutting Design
            - ATC 60-fold
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column MAZAK Versatech V-100N / 200


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18602 · Planer-Type Milling M/C - Double Column

          MAZAK - Versatech V-100N / 200 - - 2017 - Mazatrol SmoothX

          Technical details
          x-travel 5000 mm︱y-travel 3600 mm︱z-travel 710 mm︱w-axis 1250 mm︱Main spindle: ︱turning speed range - main spindle 12000 min/-1︱power capacity - main spindel 45 kW︱tool taper HSK ︱work table: ︱table surface area 2100 x 4000 mm︱max. workpiece weight 43 t︱column daylight 2750 mm︱Tool-Presetter: ︱number of toolpositions 60 pos.︱tool taper HSK ︱feeds: 8000 mm/min︱rapid traverse ( X / Y / Z ) 30/30/30 m/min︱rapid traverse W: 3 m/min︱control Mazatrol SmoothX ︱ram head dimension 450 x 450 mm︱
          Double-column, 5-Axis simultaneous Machining Center equipped with: - CNC-Control Mazatrol SmoothX - Relocation Detectro - Chip Conveyor - Coolant / Coolant through Spindle 1,5 MPA - Auto Tool Measur. & Break. detection - Scale Feedback System for x,y,z & w-axis - Work Setting Error Compensation - AAC (45kw / HSK) & ATC Tool Magazin (HSK) - Synchronized Tapping
            x-travel 5000 mm
            y-travel 3600 mm
            z-travel 710 mm
            w-axis 1250 mm
            turning speed range - main spind. 12000 min/-1
            power capacity - main spindel 45 kW
            tool taper HSK
            table surface area 2100 x 4000 mm
            max. workpiece weight 43 t
            column daylight 2750 mm
            number of toolpositions 60 pos.
            tool taper HSK
            feeds: 8000 mm/min
            rapid traverse ( X / Y / Z ) 30/30/30 m/min
            rapid traverse W: 3 m/min
            control Mazatrol SmoothX
            ram head dimension 450 x 450 mm
            Description :
            Double-column, 5-Axis simultaneous Machining Center equipped with:
            - CNC-Control Mazatrol SmoothX
            - Relocation Detectro
            - Chip Conveyor
            - Coolant / Coolant through Spindle 1,5 MPA
            - Auto Tool Measur. & Break. detection
            - Scale Feedback System for x,y,z & w-axis
            - Work Setting Error Compensation
            - AAC (45kw / HSK) & ATC Tool Magazin (HSK)
            - Synchronized Tapping
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column ZIMMERMANN FZ33c


          • MS Maschinenhandel GmbH
          • Unterdorf 34
          • 6532 Ladis
          • Österreich

          • +43 (0) 5472 219 07
            +43 (0) 5472 219 07 22
          • info@ms-maschinen.at
            www.ms-maschinen.at
          #2034-34 · Planer-Type Milling M/C - Double Column

          ZIMMERMANN - FZ33c - - 2016 - Heidenhain iTNC 530 HSCI

          Technical details
          x-travel 2500 mm︱y-travel 3000 mm︱z-travel 1250 mm︱Control Heidenhain iTNC 530 HSCI ︱head swivability +-110 °︱c-axis +-300 ︱table load 16 t︱table surface area 3250 x 2500 mm︱spindle turning speed range 25000 U/min︱tool taper HSK A 63 ︱tool change unit 50 fach Kette︱total power requirement kW︱weight of the machine ca. 53,5 t︱dimensions of the machine ca. 7600 x 7300 x 5650 mm︱
          This ZIMMERMANN FZ33c is in mint, very good condition and can be viewed live by arrangement. New price over 1 million Technical data of the system and work areas X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Clamping table Length x width x height 2500 x 3250 x 400mm Table load 8000 kg / m² (max. 16000 kg) T-slots, arranged lengthways 18H12 Distance between T-slots 250 mm Dimensions, weights Required space (without peripheral devices) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection values Voltage (three-phase) 400 V Frequency 50 Hz For fuse see installation plan See floor plan for power requirements Compressed air connection (on site) Required air pressure 6 bar Average air consumption approx. 15 m³ / h (depending on the machine equipment) Drives linear axes Feed speed X-, Y-, Z-axis 60 m / min Axis acceleration X, Y, Z axis up to 5 m / s² Drives for rotary axes –VH30 A-, C-axis feed rate 360 ??° / s Axis acceleration A, C axis 700 ° / s² Resolution A, C axis 0.0001 Accuracies of linear axes - according to VDI / DGQ 3441 Positioning accuracy X-axis P = 0.026 mm Y-axis P = 0.028 mm Z axis P = 0.020 mm Repeatability X-axis Ps = 0.015 mm Y axis Ps = 0.016 mm Z-axis Ps = 0.010 mm Resolution of the measuring systems (interpol) A, C axis 0.0001 ° Accuracy of rotary axes –VH30 Positioning accuracy A, C axis P = 12 “= 0.0033 ° Repeat accuracy A, C axis Ps = 8 “= 0.0022 ° Milling head VH20 External dimensions fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes control circuit A: min. 1200 Nm C: min. 1047 Nm clamped A and C axes: 3000 Nm Milling spindle (Siemens-Weiss) Spindle power S1 (100% ED) 45 kW Spindle speed 25,000 min-1 (Permanent grease lubrication with automatic relubrication system) Torque S1 (100% ED) 67 Nm Constant output 6,400 - 25,000 rpm Swivel axis - spindle nose 326 mm Tool holder HSK 63 A Tool clamping spring clamp Hydraulic tool clamping Permissible tool weight 4.5 kg (manufacturer's specification) External coolant supply Inside
            x-travel 2500 mm
            y-travel 3000 mm
            z-travel 1250 mm
            Control Heidenhain iTNC 530 HSCI
            head swivability +-110 °
            c-axis +-300
            table load 16 t
            table surface area 3250 x 2500 mm
            spindle turning speed range 25000 U/min
            tool taper HSK A 63
            tool change unit 50 fach Kette
            weight of the machine ca. 53,5 t
            dimensions of the machine ca. 7600 x 7300 x 5650 mm
            Description :
            This ZIMMERMANN FZ33c is in mint, very good condition and can be viewed live by
            arrangement.
            New price over 1 million
            Technical data of the system and work areas
            X-axis 2500 mm
            Y-axis 3000 mm
            Z-axis 1250 mm
            A-axis ± 110 °
            C-axis ± 300 °

            Clamping table
            Length x width x height 2500 x 3250 x 400mm
            Table load 8000 kg / m² (max. 16000 kg)
            T-slots, arranged lengthways 18H12
            Distance between T-slots 250 mm

            Dimensions, weights
            Required space (without peripheral devices) approx. 7600 x 7300 x 5650 mm
            Total weight approx. 53500 kg

            Electrical connection values
            Voltage (three-phase) 400 V
            Frequency 50 Hz
            For fuse see installation plan
            See floor plan for power requirements

            Compressed air connection (on site)
            Required air pressure 6 bar
            Average air consumption approx. 15 m³ / h (depending on the machine equipment)

            Drives linear axes
            Feed speed X-, Y-, Z-axis 60 m / min
            Axis acceleration X, Y, Z axis up to 5 m / s²

            Drives for rotary axes –VH30
            A-, C-axis feed rate 360 ??° / s
            Axis acceleration A, C axis 700 ° / s²
            Resolution A, C axis 0.0001

            Accuracies of linear axes - according to VDI / DGQ 3441
            Positioning accuracy X-axis P = 0.026 mm
            Y-axis P = 0.028 mm
            Z axis P = 0.020 mm
            Repeatability X-axis Ps = 0.015 mm
            Y axis Ps = 0.016 mm
            Z-axis Ps = 0.010 mm
            Resolution of the measuring systems (interpol) A, C axis 0.0001 °

            Accuracy of rotary axes –VH30
            Positioning accuracy A, C axis P = 12 “= 0.0033 °
            Repeat accuracy A, C axis Ps = 8 “= 0.0022 °

            Milling head VH20
            External dimensions fork head L x W approx. 500 x 600 mm
            Nominal torque of rotary axes control circuit A: min. 1200 Nm
            C: min. 1047 Nm
            clamped A and C axes: 3000 Nm

            Milling spindle (Siemens-Weiss)
            Spindle power S1 (100% ED) 45 kW
            Spindle speed 25,000 min-1
            (Permanent grease lubrication with automatic relubrication system)
            Torque S1 (100% ED) 67 Nm
            Constant output 6,400 - 25,000 rpm
            Swivel axis - spindle nose 326 mm
            Tool holder HSK 63 A
            Tool clamping spring clamp
            Hydraulic tool clamping
            Permissible tool weight 4.5 kg (manufacturer's specification)
            External coolant supply
            Inside
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column FOOKE ENDURA 704 LINEAR


          • FLECKENSTEIN Werkzeugmaschinen GmbH
          • Sommerweg 15
          • 63831 Wiesen
          • Deutschland

          • +49 (0) 6096 9706 0
            +49 (0) 6096 9706 20
          • fleckenstein@fleckenstein-machine.com
            www.fleckenstein-machine.com
          #1118-1607 · Planer-Type Milling M/C - Double Column

          FOOKE - ENDURA 704 LINEAR - - 2015 - HEIDENHAIN iTNC 530 HSCI

          Technical details
          x-travel 2200 mm︱y-travel 3500 mm︱z-travel 1500 mm︱Control HEIDENHAIN iTNC 530 HSCI ︱clamping table 3500 x 2100 mm︱T-slots 22 ︱max. load 1000 kg/m2︱feed X/Y/Z axis 5-65.000 mm/min︱rapid traverse X/Y/Z axis 65.000 mm/min︱speeding up max. 3,5 m/sec2︱fork milling head no. 4, torque motor drives : ︱A-axis (spindel swivel axis) . ︱swivel angle 220 +/-110 °︱swivel torque (simultaneous) 500 Nm︱holding force (clamped) 3000 Nm︱speed 360 °/sec︱axis acceleration 800 °/sec2︱direct measuring system - distance coded . ︱C-axis (milling head rotation axis) . ︱swivel angle 550 +/-275 °︱
          Guides, drive and measuring systems - All linear axes with linear motors make SIEMENS - water-cooled - Both rotary axes of the milling head with torque motors - Direct measuring systems for X, Y and Z axes made by HEIDENHAIN - X-, Y- and Z-axis guidance by means of high-precision linear guides for highest precision and dynamics Chip conveyor - 1 pc. hinged belt chip conveyor installed in Y-direction in front of the machine table - Drop-off height approx. 1.100 mm Coolant equipment make KNOLL 450 S-2 - tank volume approx. ca. 950 l - Internal coolant supply max. 40 l/min 60 bar - External coolant supply max. 70 l/min 10 bar Equipment / Accessories - Highly dynamic Gantry-high-bed Portal Milling Machine in compact design Portal moving in X direction. - Machine bed in rigid cast iron, side walls, cross slide and portal as welded steel construction, walking beam in cast iron. - Foundationless installation of the machine. Due to the inherently rigid machine bed, only a standard industrial floor, approx. 300 mm thick, steel-reinforced, is sufficient for installation. A special foundation, however, is not required. The machine is installed and aligned by means of fixators with anchor bolts. - The linear axes (X,Y,Z) are equipped with water-cooled linear motors made by SIEMENS. The X-axis is designed as a GANTRY-axis. - The linear and rotary axes are equipped with direct measuring systems. - The Z-axis drive is supported by highly dynamic pneumatic cylinders (weight compensation). - The linear axes are equipped with a safety system which brakes and safely holds the axes in case of voltage loss. The linear axes are equipped with hardened and ground, backlash-free preloaded linear-guideways. - The guideways are protected by bellows. - All guideways as well as the counterbalance cylinders, which have to be lubricated with grease or oil, are equipped with catching systems so that excess lubricant is collected in a controlled manner and the workpieces cannot be contaminated. The workroom is closed all around. - A top cover prevents dust form escaping unhinderd from the work area and also limits the upward flight of chips. - The front part of the cover (loading side of the machine) can be manually unlocked or locked so that the machine can be loaded and unloaded by crane or forklift truck. - The working area is illuminated with fluorescent tubes (IP 54, protected against water jets and solid foreign bodies). - 2-axis simultaneous fork-milling-head No. 4, - high frequency milling spindle make FISCHER, 24.000 min-1, HSK 63 - CNC-control HEIDENHAIN iTNC 530 HSCI - Portable electronic hand wheel (radio) -68-fold tool changer -Compact coolant system make KNOLL -3-D radio probe make M&H, Type 20.41 MULTI -Laser tool control system HEIDENHAIN, Type TL Micro 300 -Emulsion mist exhausting system -Prepared for additional external exhausting system -Chip conveyor -Milling head mechanics overhauled -All bellows renewed -Roller Blinds overhauled -Change of milling spindle on 25.Oct.2018 at 9.911 spindle hours -Operating hours: control ON 38.595 h, Machine ON 32.535 h, Prog.Run 13.390 h, Spindle 13.466 h, Axes 13.230 h
            x-travel 2200 mm
            y-travel 3500 mm
            z-travel 1500 mm
            Control HEIDENHAIN iTNC 530 HSCI
            clamping table 3500 x 2100 mm
            T-slots 22
            max. load 1000 kg/m2
            feed X/Y/Z axis 5-65.000 mm/min
            rapid traverse X/Y/Z axis 65.000 mm/min
            speeding up max. 3,5 m/sec2
            fork milling head no. 4, torque . :
            A-axis (spindel swivel axis) .
            swivel angle 220 +/-110 °
            swivel torque (simultaneous) 500 Nm
            holding force (clamped) 3000 Nm
            speed 360 °/sec
            axis acceleration 800 °/sec2
            direct measuring system - distan. .
            C-axis (milling head rotation ax. .
            swivel angle 550 +/-275 °
            Description :
            Guides, drive and measuring systems
            - All linear axes with linear motors make SIEMENS - water-cooled
            - Both rotary axes of the milling head with torque motors
            - Direct measuring systems for X, Y and Z axes made by HEIDENHAIN
            - X-, Y- and Z-axis guidance by means of high-precision linear guides for
            highest precision and dynamics

            Chip conveyor
            - 1 pc. hinged belt chip conveyor installed in Y-direction in front of the
            machine table
            - Drop-off height approx. 1.100 mm

            Coolant equipment make KNOLL 450 S-2
            - tank volume approx. ca. 950 l
            - Internal coolant supply max. 40 l/min 60 bar
            - External coolant supply max. 70 l/min 10 bar

            Equipment / Accessories
            - Highly dynamic Gantry-high-bed Portal Milling Machine in compact design
            Portal moving in X direction.
            - Machine bed in rigid cast iron, side walls, cross slide and portal as welded
            steel construction, walking beam in cast iron.
            - Foundationless installation of the machine. Due to the inherently rigid
            machine bed, only a standard industrial floor, approx. 300 mm thick,
            steel-reinforced, is sufficient for installation. A special foundation,
            however, is not required. The machine is installed and aligned by means of
            fixators with anchor bolts.
            - The linear axes (X,Y,Z) are equipped with water-cooled linear motors made by
            SIEMENS. The X-axis is designed as a GANTRY-axis.
            - The linear and rotary axes are equipped with direct measuring systems.
            - The Z-axis drive is supported by highly dynamic pneumatic cylinders (weight
            compensation).
            - The linear axes are equipped with a safety system which brakes and safely
            holds the axes in case of voltage loss. The linear axes are equipped with
            hardened and ground, backlash-free preloaded linear-guideways.
            - The guideways are protected by bellows.
            - All guideways as well as the counterbalance cylinders, which have to be
            lubricated with grease or oil, are equipped with catching systems so that
            excess lubricant is collected in a controlled manner and the workpieces cannot
            be contaminated. The workroom is closed all around.
            - A top cover prevents dust form escaping unhinderd from the work area and also
            limits the upward flight of chips.
            - The front part of the cover (loading side of the machine) can be manually
            unlocked or locked so that the machine can be loaded and unloaded by crane or
            forklift truck.
            - The working area is illuminated with fluorescent tubes (IP 54, protected
            against water jets and solid foreign bodies).
            - 2-axis simultaneous fork-milling-head No. 4,
            - high frequency milling spindle make FISCHER, 24.000 min-1, HSK 63
            - CNC-control HEIDENHAIN iTNC 530 HSCI
            - Portable electronic hand wheel (radio)
            -68-fold tool changer
            -Compact coolant system make KNOLL
            -3-D radio probe make M&H, Type 20.41 MULTI
            -Laser tool control system HEIDENHAIN, Type TL Micro 300
            -Emulsion mist exhausting system
            -Prepared for additional external exhausting system
            -Chip conveyor
            -Milling head mechanics overhauled
            -All bellows renewed
            -Roller Blinds overhauled
            -Change of milling spindle on 25.Oct.2018 at 9.911 spindle hours
            -Operating hours: control ON 38.595 h, Machine ON 32.535 h, Prog.Run 13.390 h,
            Spindle 13.466 h, Axes 13.230 h
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column FOOKE Endura 704 Linear


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-17920 · Planer-Type Milling M/C - Double Column

          FOOKE - Endura 704 Linear - - 2014 - Heidenhain iTNC 530 HSCI

          Technical details
          x-travel 2200 mm︱y-travel 3500 mm︱z-travel 1200 mm︱control Heidenhain iTNC 530 HSCI ︱Main spindle: ︱turning speed range - main spindle 24000 min/-1︱power capacity - main spindel 42 / 48 kW︱tool taper HSK 63 A ︱max. Torque 67 / 76 Nm︱swivellable A: +/- 110 °︱rotatable C: +/- 275 °︱work table: ︱table surface area 2100 x 3500 mm︱max. workpiece weight 5.000 kg︱Tool-Presetter: ︱number of toolpositions 68 pos.︱tool taper HSK 63 A ︱feeds: ︱rapid traverse ( X / Y / Z ) 65 m/min︱rapid traverse A: 8 1/min︱
          5 simultanous axis CNC portal milling machine equipped with: - CNC control Heidenhain iTNC 530 HSCI & HR 520 - Milling head FK 4 - 42kW Fischer spindle - 68-fold tool changer (HSK-A 63) - KSS Coolant (IKZ 60bar / AKZ 10bar) - Chip conveyor - Workpiece Measuring M&H Inprocess Messtechnik, Typ 20.41 MULTI - Laser-Tool Control Heidenhain TL Micro 300, - Work Mode 4 - DXF converter (HEIDENHAIN software option) - Suction preparation machine: ca 33600h, milling spindle: ca 12100h
            x-travel 2200 mm
            y-travel 3500 mm
            z-travel 1200 mm
            control Heidenhain iTNC 530 HSCI
            turning speed range - main spind. 24000 min/-1
            power capacity - main spindel 42 / 48 kW
            tool taper HSK 63 A
            max. Torque 67 / 76 Nm
            swivellable A: +/- 110 °
            rotatable C: +/- 275 °
            table surface area 2100 x 3500 mm
            max. workpiece weight 5.000 kg
            number of toolpositions 68 pos.
            tool taper HSK 63 A
            rapid traverse ( X / Y / Z ) 65 m/min
            rapid traverse A: 8 1/min
            Description :
            5 simultanous axis CNC portal milling machine equipped with:
            - CNC control Heidenhain iTNC 530 HSCI & HR 520
            - Milling head FK 4
            - 42kW Fischer spindle
            - 68-fold tool changer (HSK-A 63)
            - KSS Coolant (IKZ 60bar / AKZ 10bar)
            - Chip conveyor
            - Workpiece Measuring M&H Inprocess Messtechnik, Typ 20.41 MULTI
            - Laser-Tool Control Heidenhain TL Micro 300,
            - Work Mode 4
            - DXF converter (HEIDENHAIN software option)
            - Suction preparation

            machine: ca 33600h, milling spindle: ca 12100h


          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column ZAYER Memphis U-9000


          • Plum & Partner Werkzeugmaschinen GmbH
          • Winkelstraße 32
          • 32257 Bünde
          • Deutschland

          • +49 05223 574444
            +49 5223188330
          • info@plum-maschinen.de
            www.plum-maschinen.de
          #1082-12182 · Planer-Type Milling M/C - Double Column

          ZAYER - Memphis U-9000 - - 2010 - Sinumerik 840D

          Technical details
          x-travel 9000 mm︱y-travel 3000 mm︱z-travel 1250 mm︱control Sinumerik 840D ︱table surface area 10000 x 3000 mm︱distance between columns 4000 mm︱distance table -spindle nose max/min 73 - 1323 mm︱operating hours 14000/20100 ︱tool taper DIN 69871 A 50 ︱turning speed range 35 - 4000 U/min︱feeds 6 - 20000 mm/min︱rapid traverse X- and Y-axis 40000 m/min︱rapid traverse: vertical 30000 mm/min︱tool changer number of tools 80 ︱weight of tools max. 25 kg︱tool changing time 10 sec︱milling head -swivable 360 Grad︱milling motor 37 kW︱weight of the machine ca. 140 t︱dimensions of the machine ca. 13,5 x 6,5 x 5,5 (7) m︱
          Iberimex-Zayer high-speed milling machine in gantry design with Siemens Sinumerik 840D, final acceptance and start of work 02/2010 but type sign 2008! Operating hours 38200,Milling hours 14,000. Milling head 45 ° as controlled 5th axis with autom. Positioning every 0.001 ° (360,000 positions) with central grease lubrication, special vertical head with reinforced bearings 100 mm. Further: - Hirth serration for centering the milling heads on the C-axis turntable as well as Hirth serration for vertical and universal milling heads - Cooling unit for thermal stabilization for ZF gearbox boom and milling head by means of a liquid cooling system, cooling medium water / glycol - Control cabinet with cooling unit - Coolant device with tank approx. 1000 liters, pump adjustable from 6 - 40 bar, delivery rate 30 liters / min., As well as 5 bar, delivery rate 60 liters / min. for external cooling with belt filter and magnetic separator instead of standard - Automatic water / air switchover via M function for internal and external coolant supply - internal coolant supply according to DIN 69871 A-D through the center of the spindle for universal milling head - Chip conveyors on both sides of the table as well as additional ones Cross chip conveyor - Machines - Brankamp CMS collision protection, 1-channel - Work area monitoring by means of a camera and TFT monitor camera arranged under the cross beam. - cladding: Complete enclosure, closed on 4 sides, open at the top, cover of the Tool change magazine including safety lock - Special design: doors on both sides - Hydraulic counterbalance to compensate for the ram - Longitudinal drive X-axis and transverse drive Y-axis by means of a rack and 2 Servomotors. The drives are electronically pre-tensioned free of play (master- slave principle) - Vertical adjustment of the Z-axis by means of a ball screw spindle (diameter 80) and a pre-tensioned double nut. PLEASE NOTE: This is a large machine. We offer the machine ex location, which means the buyer has to organize and pay for the correct dismantling, packaging / container, shipping and reconstruction. There are strong hall cranes at the site. Machine dealer with own stock of 2500 m².
            x-travel 9000 mm
            y-travel 3000 mm
            z-travel 1250 mm
            control Sinumerik 840D
            table surface area 10000 x 3000 mm
            distance between columns 4000 mm
            distance table -spindle nose max/min 73 - 1323 mm
            operating hours 14000/20100
            tool taper DIN 69871 A 50
            turning speed range 35 - 4000 U/min
            feeds 6 - 20000 mm/min
            rapid traverse X- and Y-axis 40000 m/min
            rapid traverse: vertical 30000 mm/min
            tool changer number of tools 80
            weight of tools max. 25 kg
            tool changing time 10 sec
            milling head -swivable 360 Grad
            milling motor 37 kW
            weight of the machine ca. 140 t
            dimensions of the machine ca. 13,5 x 6,5 x 5,5 (7) m
            Description :
            Iberimex-Zayer high-speed milling machine in gantry design with Siemens
            Sinumerik 840D, final acceptance and start of work 02/2010 but type sign 2008!
            Operating hours 38200,Milling hours 14,000.
            Milling head 45 ° as controlled 5th axis with autom. Positioning every 0.001 °
            (360,000 positions) with central grease lubrication, special vertical head with
            reinforced bearings 100 mm.
            Further:
            - Hirth serration for centering the milling heads on the C-axis turntable
            as well as Hirth serration for vertical and universal milling heads
            - Cooling unit for thermal stabilization for ZF gearbox boom and milling head
            by means of a liquid cooling system, cooling medium water / glycol
            - Control cabinet with cooling unit
            - Coolant device with tank approx. 1000 liters, pump adjustable from 6 - 40
            bar, delivery rate 30 liters / min., As well as 5 bar, delivery rate 60 liters /
            min. for external cooling with belt filter and magnetic separator instead of
            standard
            - Automatic water / air switchover via M function for internal and external
            coolant supply
            - internal coolant supply according to DIN 69871 A-D through the center of the
            spindle for universal milling head
            - Chip conveyors on both sides of the table as well as additional ones
            Cross chip conveyor
            - Machines - Brankamp CMS collision protection, 1-channel
            - Work area monitoring by means of a camera and TFT monitor camera arranged
            under the cross beam.
            - cladding:
            Complete enclosure, closed on 4 sides, open at the top, cover of the
            Tool change magazine including safety lock
            - Special design: doors on both sides
            - Hydraulic counterbalance to compensate for the ram
            - Longitudinal drive X-axis and transverse drive Y-axis by means of a rack and 2
            Servomotors. The drives are electronically pre-tensioned free of play (master-
            slave principle)
            - Vertical adjustment of the Z-axis by means of a ball screw spindle (diameter
            80) and a pre-tensioned double nut.
            PLEASE NOTE: This is a large machine. We offer the machine ex location, which
            means the buyer has to organize and pay for the correct dismantling, packaging /
            container, shipping and reconstruction. There are strong hall cranes at the
            site.
            Machine dealer with own stock of 2500 m².
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column JOHNFORD SDMC 10500


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18687 · Planer-Type Milling M/C - Double Column

          JOHNFORD - SDMC 10500 - - 2010 - Siemens 840 D

          Technical details
          x-travel 10500 mm︱y-travel 2800 mm︱z-travel 1066 mm︱Control Siemens 840 D ︱table-size 10500 x 2200 mm︱distance between columns 2800 mm︱milling head ︱number of spindle speeds 6000 U/min/rpm︱spindle drive 30 / 37 kW︱spindle diameter 90 mm︱table weight unlimited Kg︱distance table - lower edge spindle 400 - 1466 mm︱Rapid Travel X / Y / Z-Achse 30 / 30 /12 m/min︱feed speeds 1 - 10000 mm/min︱total power requirement 97 kW︱weight of the machine ca. 86 t︱dimensions of the machine ca. 21 x 7 x 4,65 m︱
          5 - AXES PORTAL MILLING MACHINE - CNC control Siemens 840D - 60-fold tool changer (ISO 50) - Bi-Rotativ Milling Head with A- & C-Axis (2,5 x 2,5°) - Handwheel electronic - autom. lubrication system
            x-travel 10500 mm
            y-travel 2800 mm
            z-travel 1066 mm
            Control Siemens 840 D
            table-size 10500 x 2200 mm
            distance between columns 2800 mm
            number of spindle speeds 6000 U/min/rpm
            spindle drive 30 / 37 kW
            spindle diameter 90 mm
            table weight unlimited Kg
            distance table - lower edge spin. 400 - 1466 mm
            Rapid Travel X / Y / Z-Achse 30 / 30 /12 m/min
            feed speeds 1 - 10000 mm/min
            total power requirement 97 kW
            weight of the machine ca. 86 t
            dimensions of the machine ca. 21 x 7 x 4,65 m
            Description :
            5 - AXES PORTAL MILLING MACHINE
            - CNC control Siemens 840D
            - 60-fold tool changer (ISO 50)
            - Bi-Rotativ Milling Head with A- & C-Axis (2,5 x 2,5°)
            - Handwheel electronic
            - autom. lubrication system

          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH-COBURG


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18559 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - - - 2009 reb - Siemens Sinumerik 840 D

          Technical details
          x-travel 17800 mm︱y-travel 6300 mm︱z-travel 1750 mm︱control Siemens Sinumerik 840 D ︱w-axis 3000 mm︱table surface area 8250 + 8250 x 4000 mm︱passage width 4300 mm︱Passage height 4600 mm︱main drive motor 75 kW︱spindle taper ISO 60 ︱milling head speed 2500 U/min︱workpiece weight 200 t︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          rebuild/overhauled in 2009 and equipped with: - CNC control Siemens Sinumerik 840 D - Milling and boring head WFU800SZ/F17 - Chip Conveyor - ATC - Tool type ISO 50/60 (auto tool attachment change) - for 80 Tools - Head Attachments 4ea - Hydraulic units - Coolant system
            x-travel 17800 mm
            y-travel 6300 mm
            z-travel 1750 mm
            control Siemens Sinumerik 840 D
            w-axis 3000 mm
            table surface area 8250 + 8250 x 4000 mm
            passage width 4300 mm
            Passage height 4600 mm
            main drive motor 75 kW
            spindle taper ISO 60
            milling head speed 2500 U/min
            workpiece weight 200 t
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            rebuild/overhauled in 2009 and equipped with:
            - CNC control Siemens Sinumerik 840 D
            - Milling and boring head WFU800SZ/F17
            - Chip Conveyor
            - ATC - Tool type ISO 50/60 (auto tool attachment change)
            - for 80 Tools
            - Head Attachments 4ea
            - Hydraulic units
            - Coolant system
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column TOS - KURIM FRF 300 - V / A6


          • MWB GmbH & CO. KG
          • Rochlitzer Strasse 6 b
          • 09326 Geringswalde
          • Deutschland

          • +49 37382 8739
          • info@mwb-blochwitz.de
            https://www.mwb-blochwitz.de/
          #2069-7710 · Planer-Type Milling M/C - Double Column

          TOS - KURIM - FRF 300 - V / A6 - - 2009 - SIEMENS 840 D

          Technical details
          x-travel 5000 mm︱y-travel 3800 mm︱z-travel 1280 mm︱Control SIEMENS 840 D ︱table surface area 3000 x 6000 mm︱table load 4000 kg/m2 ︱turning speeds 20 - 4000 U/min︱tool taper SK 50 ︱max. torque on the spindle max. 1000 N ︱feed 30 m/min︱distance between columns 3550 mm︱Passage under the portal 2050 mm︱Spindle rotation B 210 ° ︱Spindle rotation C 360 ° ︱C-axis rotation speed 1 - 1800°/min ︱Spindle head VK ︱Spindle head VP2 ︱total power requirement 37 kW︱
            x-travel 5000 mm
            y-travel 3800 mm
            z-travel 1280 mm
            Control SIEMENS 840 D
            table surface area 3000 x 6000 mm
            table load 4000 kg/m2
            turning speeds 20 - 4000 U/min
            tool taper SK 50
            max. torque on the spindle max. 1000 N
            feed 30 m/min
            distance between columns 3550 mm
            Passage under the portal 2050 mm
            Spindle rotation B 210 °
            Spindle rotation C 360 °
            C-axis rotation speed 1 - 1800°/min
            total power requirement 37 kW
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column KAO MING 332M Multi face


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-1110043 · Planer-Type Milling M/C - Double Column

          KAO MING - 332M Multi face - - 2009 - FANUC 18iTB

          Technical details
          x-travel 3.230 mm︱y-travel 3.850 mm︱z-travel 1.100 mm︱Control FANUC 18iTB ︱total power requirement 22/26 kW︱weight of the machine ca. 44 t︱dimensions of the machine ca. 8.1x7.5x5 m︱
          Make KAO MING Typ332M multi face Year of construction 2009 Control type CNC FANUC 18i-MB Table size (mm) 3000 x 2600 mm X out (mm) 3230 Y-off (mm) 3850 Z-off (mm) 1100 / max. distance between table and spindle 1425 mm Table burden 12,000 kg Speed (RPM) maximum 8000 tool holder ISO 50 Feed along (mm/Rev) 5 mtr/min. Feed (mm/Rev) across 5 mtr/min Vorschüb vertical (mm/Rev) 5 mtr/min. Rapid traverse 10 mtr/min Gesamtleistung(kW) spindle 22/26 kW Length (mm) 8130 Width (mm) 7493 Height (mm) 5080 Weight 44,000 kg Additional information WzW for 30 tools
            x-travel 3.230 mm
            y-travel 3.850 mm
            z-travel 1.100 mm
            Control FANUC 18iTB
            total power requirement 22/26 kW
            weight of the machine ca. 44 t
            dimensions of the machine ca. 8.1x7.5x5 m
            Description :
            Make KAO MING
            Typ332M multi face
            Year of construction 2009
            Control type CNC FANUC 18i-MB
            Table size (mm) 3000 x 2600 mm
            X out (mm) 3230
            Y-off (mm) 3850
            Z-off (mm) 1100 / max. distance between table and spindle 1425 mm
            Table burden 12,000 kg
            Speed (RPM) maximum 8000 tool holder ISO 50
            Feed along (mm/Rev) 5 mtr/min.
            Feed (mm/Rev) across 5 mtr/min
            Vorschüb vertical (mm/Rev) 5 mtr/min.
            Rapid traverse 10 mtr/min
            Gesamtleistung(kW) spindle 22/26 kW
            Length (mm) 8130
            Width (mm) 7493
            Height (mm) 5080
            Weight 44,000 kg


            Additional information
            WzW for 30 tools
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH-COBURG


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18560 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - - - 2008 reb - Siemens Sinumerik 840 D

          Technical details
          x-travel 15300 mm︱y-travel 7000 mm︱z-travel 2500 mm︱control Siemens Sinumerik 840 D ︱w-axis 4500 mm︱table surface area 15000x 4670 mm︱passage width 5200 mm︱Passage height 6300 mm︱main drive motor 105 kW︱spindle taper ISO 60 ︱milling head speed 2500 U/min︱workpiece weight 350 t︱total power requirement - kW︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          rebuild/overhauled in 2008 and equipped with: - CNC control Siemens Sinumerik 840 D - Milling and boring head (S-17) - 2 Chip Conveyor - ATC - Tool type ISO 50/60 (auto tool attachment change) - for 80 Tools - Head Attachments 8ea - Hydraulic units - Coolant system
            x-travel 15300 mm
            y-travel 7000 mm
            z-travel 2500 mm
            control Siemens Sinumerik 840 D
            w-axis 4500 mm
            table surface area 15000x 4670 mm
            passage width 5200 mm
            Passage height 6300 mm
            main drive motor 105 kW
            spindle taper ISO 60
            milling head speed 2500 U/min
            workpiece weight 350 t
            total power requirement - kW
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            rebuild/overhauled in 2008 and equipped with:
            - CNC control Siemens Sinumerik 840 D
            - Milling and boring head (S-17)
            - 2 Chip Conveyor
            - ATC - Tool type ISO 50/60 (auto tool attachment change)
            - for 80 Tools
            - Head Attachments 8ea
            - Hydraulic units
            - Coolant system
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column AWEA LP 4021


          • JS-Werkzeugmaschinen GmbH
          • Weserstrasse 228
          • 32545 Bad Oeynhausen
          • Deutschland

          • +49 (0) 163 - 6037450
          • info@js-wzm.de
            www.js-wzm.de
          #2062-0814 · Planer-Type Milling M/C - Double Column

          AWEA - LP 4021 - - 2008 - Fanuc 18i

          Technical details
          x-travel 4.000 mm︱y-travel 2.100 mm︱z-travel 1.000 mm︱Control Fanuc 18i ︱table-size 4.000 x 2.000 mm︱rapid traverse X-axis 18 m/min︱rapid traverse Y-axis 18 m/min︱rapid traverse Z-axis 15 m/min︱turning speed range - drive spindle 10 ~ 6.000 U/min︱power capacity - milling spindle 26 / 22 kW︱tool taper DIN 69871 A50 ︱tool piece magazine with 60 Pos.︱T-slots 18h8 / 125mm ︱total power requirement 70 kVA︱weight of the machine ca. 42 t︱dimensions of the machine ca. 8 x 3 x 4 m︱
          Manufacturer: AWEA Model: LP4021 Type: portal milling machine Condition: used Year of construction: 2008 Equipment: Fanuc 18i control 60-fold tool changer Internal coolant supply 40 bar Chip conveyor Electronic handwheel Autom. Indexing device for milling heads 90 ° angle milling head Pick-up station for milling heads Measuring probe for workpiece measurement Spindle 6,000 rpm. SK50 Din 69871 Basic equipment of the machine: 32 bit Fanuc CNC control 10.4 inch color LCD screen AC - Digital Fanuc main spindle and axis motors Tool holder DIN 69871 A50 Main spindle speed range 10 ~ 6,000 min-1 with buildt-in motor spindle Drive power of the main spindle 26/22 KW Cooling through the form A spindle Additional coolant tank with paper band filter Travel X - axis 4,000mm Y - axis 2.100mm Z axis 1,000mm Table size 4,000 x 2,000mm Rapid traverse X - axis 18m / min Y axis 18m / min Z axis 15m / min
            x-travel 4.000 mm
            y-travel 2.100 mm
            z-travel 1.000 mm
            Control Fanuc 18i
            table-size 4.000 x 2.000 mm
            rapid traverse X-axis 18 m/min
            rapid traverse Y-axis 18 m/min
            rapid traverse Z-axis 15 m/min
            turning speed range - drive spin. 10 ~ 6.000 U/min
            power capacity - milling spindle 26 / 22 kW
            tool taper DIN 69871 A50
            tool piece magazine with 60 Pos.
            T-slots 18h8 / 125mm
            total power requirement 70 kVA
            weight of the machine ca. 42 t
            dimensions of the machine ca. 8 x 3 x 4 m
            Description :
            Manufacturer: AWEA
            Model: LP4021

            Type: portal milling machine
            Condition: used
            Year of construction: 2008
            Equipment: Fanuc 18i control
            60-fold tool changer
            Internal coolant supply 40 bar
            Chip conveyor
            Electronic handwheel
            Autom. Indexing device for milling heads
            90 ° angle milling head
            Pick-up station for milling heads
            Measuring probe for workpiece measurement
            Spindle 6,000 rpm.
            SK50 Din 69871

            Basic equipment of the machine:
            32 bit Fanuc CNC control
            10.4 inch color LCD screen
            AC - Digital Fanuc main spindle and axis motors
            Tool holder DIN 69871 A50
            Main spindle speed range 10 ~ 6,000 min-1 with buildt-in motor spindle
            Drive power of the main spindle 26/22 KW
            Cooling through the form A spindle
            Additional coolant tank with paper band filter

            Travel
            X - axis 4,000mm
            Y - axis 2.100mm
            Z axis 1,000mm
            Table size 4,000 x 2,000mm
            Rapid traverse
            X - axis 18m / min
            Y axis 18m / min
            Z axis 15m / min
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WALDRICH-COBURG PMC 4000 AS-M4


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18956 · Planer-Type Milling M/C - Double Column

          WALDRICH-COBURG - PMC 4000 AS-M4 - - 2007/2013 - Fanuc 18i-mB

          Technical details
          x-travel 20000 mm︱y-travel 4900 mm︱z-travel 1500 mm︱distance between columns 4200 mm︱table load 200 t︱milling slide 75 kW︱spindle turning speed range 20 - 4000 U/min︱diameter of quill mm︱tool taper ︱feed in x - axis mm/min︱feed in y - axis mm/min︱feed range Z-direction mm/min︱table-size 20000 x 3200 mm︱w-axis 2500 mm︱control Fanuc 18i-mB ︱total power requirement - kVA︱weight of the machine ca. - t︱dimensions of the machine ca. - m︱
          2013 new control Portal milling machine (5-sided machining) equipped with: - CNC control FANUC 18i MB - 2 angle heads - chip conveyor
            x-travel 20000 mm
            y-travel 4900 mm
            z-travel 1500 mm
            distance between columns 4200 mm
            table load 200 t
            milling slide 75 kW
            spindle turning speed range 20 - 4000 U/min
            table-size 20000 x 3200 mm
            w-axis 2500 mm
            control Fanuc 18i-mB
            total power requirement - kVA
            weight of the machine ca. - t
            dimensions of the machine ca. - m
            Description :
            2013 new control
            Portal milling machine (5-sided machining) equipped with:
            - CNC control FANUC 18i MB
            - 2 angle heads
            - chip conveyor
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column NICOLAS CORREA FP 40/40 UAGA


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-859 · Planer-Type Milling M/C - Double Column

          NICOLAS CORREA - FP 40/40 UAGA - - 2006 - HEIDENHAIN iTNC-530

          Technical details
          x-travel 4.000 mm︱y-travel 3.000 mm︱z-travel 1.000 mm︱Control HEIDENHAIN iTNC-530 ︱table-size 4.500 x 2.000 mm︱distance between columns 1.000 mm︱rapid traverse X-axis 15.000 mm/min︱rapid motion - y-axis 12.000 mm/min︱rapid traverse Z-axis 12.000 mm/min︱tool taper ISO 50 ︱table weight 15.000 Kg︱feeds 5.000 mm/min︱milling head -swivable 45°/2,5°/2,5° Grad︱handwheel HR 410 ︱Chip coveyor inkl. ︱main drive 22 kW︱weight of the machine ca. 44 t︱
          - Direct Output INCLUDED - Universal Head UAGA INCLUDED - Auto Indexing Head 2, 5º /2.5º - Automatic Support in the right side for Head UAGA INCLUDED - Automatic Support in the left site for Direct Output Head.INCLUDED - Automatic Head Changer INCLUDED
            x-travel 4.000 mm
            y-travel 3.000 mm
            z-travel 1.000 mm
            Control HEIDENHAIN iTNC-530
            table-size 4.500 x 2.000 mm
            distance between columns 1.000 mm
            rapid traverse X-axis 15.000 mm/min
            rapid motion - y-axis 12.000 mm/min
            rapid traverse Z-axis 12.000 mm/min
            tool taper ISO 50
            table weight 15.000 Kg
            feeds 5.000 mm/min
            milling head -swivable 45°/2,5°/2,5° Grad
            handwheel HR 410
            Chip coveyor inkl.
            main drive 22 kW
            weight of the machine ca. 44 t
            Description :
            - Direct Output INCLUDED
            - Universal Head UAGA INCLUDED
            - Auto Indexing Head 2, 5º /2.5º
            - Automatic Support in the right side for Head UAGA INCLUDED
            - Automatic Support in the left site for Direct Output Head.INCLUDED
            - Automatic Head Changer INCLUDED

          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column SNK (SHIN NIPPON KOKI) RB-5


          • Kemmerich Werkzeugmaschinen GmbH
          • Im Rottfeld 1a
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 2173 207474
            +49 2173 207473
          • info@kemmerich.biz
            www.kemmerich.biz
          #1020-18880 · Planer-Type Milling M/C - Double Column

          SNK (SHIN NIPPON KOKI) - RB-5 - - 2006 - Fanuc 18iMB

          Technical details
          x-travel 5250 mm︱y-travel 2900 mm︱z-travel 600 mm︱w-axis 1380 mm︱table-size 5000 x 2500 mm︱distance between columns 2900 mm︱workpiece weight 20000 kg︱distance table - lower edge spindle 1800 mm︱spindle diameter 90 mm︱diameter of quill 300 mm︱spindle turning speed range 6000 U/min︱spindle taper ISO 50 ︱feeds x/y/z -stepless 1- 10/10/8 m/min︱rapid travel x/y/z 15/20/8 m/min︱spindle motor 25 / 22 kW︱Control Fanuc 18iMB ︱total power requirement 75 KVA︱weight of the machine ca. 51 t︱dimensions of the machine ca. 6,4 x 14,6 x 5,2 m︱
          5 sides machining (4 axes simultaneous) equipped with: - CNC control Fanuc 18iMB - tool changer 80-fold (MAS BT 50) - additional Milling Head 35600h working & 13500h Spindle Hours
            x-travel 5250 mm
            y-travel 2900 mm
            z-travel 600 mm
            w-axis 1380 mm
            table-size 5000 x 2500 mm
            distance between columns 2900 mm
            workpiece weight 20000 kg
            distance table - lower edge spin. 1800 mm
            spindle diameter 90 mm
            diameter of quill 300 mm
            spindle turning speed range 6000 U/min
            spindle taper ISO 50
            feeds x/y/z -stepless 1- 10/10/8 m/min
            rapid travel x/y/z 15/20/8 m/min
            spindle motor 25 / 22 kW
            Control Fanuc 18iMB
            total power requirement 75 KVA
            weight of the machine ca. 51 t
            dimensions of the machine ca. 6,4 x 14,6 x 5,2 m
            Description :
            5 sides machining (4 axes simultaneous)
            equipped with:
            - CNC control Fanuc 18iMB
            - tool changer 80-fold (MAS BT 50)
            - additional Milling Head

            35600h working & 13500h Spindle Hours
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column CORREA rapid 5


          • Intermach BV
          • lange voor 71
          • 8316BC Marknesse
          • Niederlande

          • +31 (0)527 201323
          • info@intermach.nl
            www.intermach.nl
          #2050-1110051 · Planer-Type Milling M/C - Double Column

          CORREA - rapid 5 - - 2004 -

          Technical details
          x-travel 5000 mm︱y-travel 3100 mm︱z-travel 1200 mm︱Control ︱total power requirement 20/27 kW︱weight of the machine ca. 65 t︱dimensions of the machine ca. 15x6,2x6 m︱
          Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd
            x-travel 5000 mm
            y-travel 3100 mm
            z-travel 1200 mm
            total power requirement 20/27 kW
            weight of the machine ca. 65 t
            dimensions of the machine ca. 15x6,2x6 m
            Description :
            Stock number 1110051
            Machine type CNC Portal milling machine
            Make CORREA
            Rapid type 50
            Year of manufacture 2004
            Control type HEIDENHAIN
            Table size (mm) 5000 x 2000 mm
            X out (mm) 5000 mm
            Y-off (mm) 3100 mm
            Z-off (mm) 1200 mm
            Table load Max 15 ton
            Speed (RPM) Max 18,000
            Tool holder HSK 63
            Gesamtleistung(kW) 20/27
            Length (mm) 15000
            Width (mm) 6200
            Height (mm) 6000
            Weight 65 ton


            Additional information

            Tool changer for 24 tools
            5-axis gesteuerd
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column NICOLAS CORREA FP 40/40


          • Aleman Machines e.K.
          • Am Mühlweg 1
          • 73466 Lauchheim
          • Deutschland

          • +49 (0)7363-6098 20
            +49 (0)7363-6098 19
          • info@aleman-machines.com
            www.aleman-machines.com
          #1120-869 · Planer-Type Milling M/C - Double Column

          NICOLAS CORREA - FP 40/40 - - 2003 - HEIDENHAIN TNC-530

          Technical details
          x-travel 4.000 mm︱y-travel 2.500 mm︱z-travel 800 mm︱Control HEIDENHAIN TNC-530 ︱table weight 10.000 Kg︱taper ISO-50 ︱distance between columns 2.050 mm︱rapid motion - x-axis 15.000 mm/min︱rapid motion - y-axis 12.000 mm/min︱working speed: 5.000 mm/min︱table surface area 4.000 x 1.500 mm︱handwheel HR 410 ︱total power requirement 22 kW︱weight of the machine ca. 30.000 kg︱dimensions of the machine ca. m︱
          Direct Output Head Universal Head 45º Auto Indexing Head 2,5° Automatic Support in the right side for Head 45º Automatic Support in the left site for Direct Output Head. Automatic Head Changer Portable Handwheel
            x-travel 4.000 mm
            y-travel 2.500 mm
            z-travel 800 mm
            Control HEIDENHAIN TNC-530
            table weight 10.000 Kg
            taper ISO-50
            distance between columns 2.050 mm
            rapid motion - x-axis 15.000 mm/min
            rapid motion - y-axis 12.000 mm/min
            working speed: 5.000 mm/min
            table surface area 4.000 x 1.500 mm
            handwheel HR 410
            total power requirement 22 kW
            weight of the machine ca. 30.000 kg
            Description :
            Direct Output Head
            Universal Head 45º
            Auto Indexing Head 2,5°
            Automatic Support in the right side for Head 45º
            Automatic Support in the left site for Direct Output Head.
            Automatic Head Changer
            Portable Handwheel

          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column WESTPHAL Techline M 510


          • IMZ Maschinen Vertriebs GmbH
          • Marie-Curie-Straße 19
          • 73529 Schwäbisch Gmünd
          • Deutschland

          • 0049 (0) 7171 987130
            0049 (0) 7171 9871329
          • info@imz.de
            www.imz.de
          #1075-6925 · Planer-Type Milling M/C - Double Column

          WESTPHAL - Techline M 510 - - 2003 - NUM 1060 W

          Technical details
          x-travel 11200 mm︱y-travel 3130 mm︱z-travel 1000 mm︱Control NUM 1060 W ︱A-axis +- 120 °︱c-axis +215/-210 °︱spindle motor 15 kW︱spindle taper HSK-F63 ︱turning speeds 24000 U/min︱table width 1500 mm︱table length 9400 oder 2x3000 mm︱total power requirement kW︱weight of the machine ca. 20 t︱dimensions of the machine ca. 14,6x5,0x4,225 m︱
          Use: e.g. for processing aluminum panels, drilling profiles, advertising (signs milling, etc.), mold construction (prototypes) and processing of light steel frames / -beams using HSC milling The vertically arranged high-frequency milling spindle for automatic Tool change is mounted in a fork head on the Z-axis plate. The Spindle can be moved with the fork head in 2 NC axes, in the A axis and the C-axis. The vertical movement is carried out via the Z-axis. Liquid cooling via a cooling unit. Tool magazine: moving plate changer in the potal, outside the Work area Minimum quantity cooling and lubrication system MQL The machine table consists of milled aluminum plates 8 bar compressed air, clean, dry, oil-free, including pressure intensifier 10- 12 bar to express the tool Feed rates in rapid traverse / working step: X-axis: 60 m / min Y-axis: 60 m / min Z-axis: 30 m / min C-axis: 90 ° sec A-axis: 90 ° sec Total weight approx.20,000 kg Base frame approx.12,500 kg Portal with Z-axis approx. 6,500 kg machine hours: 46.312 h
            x-travel 11200 mm
            y-travel 3130 mm
            z-travel 1000 mm
            Control NUM 1060 W
            A-axis +- 120 °
            c-axis +215/-210 °
            spindle motor 15 kW
            spindle taper HSK-F63
            turning speeds 24000 U/min
            table width 1500 mm
            table length 9400 oder 2x3000 mm
            weight of the machine ca. 20 t
            dimensions of the machine ca. 14,6x5,0x4,225 m
            Description :
            Use:
            e.g. for processing aluminum panels, drilling profiles, advertising (signs
            milling, etc.), mold construction (prototypes) and processing of light steel
            frames /
            -beams using HSC milling

            The vertically arranged high-frequency milling spindle for automatic
            Tool change is mounted in a fork head on the Z-axis plate. The
            Spindle can be moved with the fork head in 2 NC axes, in the A axis
            and the C-axis. The vertical movement is carried out via the Z-axis.
            Liquid cooling via a cooling unit.

            Tool magazine: moving plate changer in the potal, outside the
            Work area
            Minimum quantity cooling and lubrication system MQL
            The machine table consists of milled aluminum plates
            8 bar compressed air, clean, dry, oil-free, including pressure intensifier 10-
            12 bar
            to express the tool

            Feed rates in rapid traverse / working step:
            X-axis: 60 m / min
            Y-axis: 60 m / min
            Z-axis: 30 m / min
            C-axis: 90 ° sec
            A-axis: 90 ° sec

            Total weight approx.20,000 kg
            Base frame approx.12,500 kg
            Portal with Z-axis approx. 6,500 kg

            machine hours: 46.312 h
          Datasheet
          Request / Contact
          used Milling machines Planer-Type Milling M/C - Double Column JOBS LINX BLITZ


          • Knops Werkzeugmaschinen
          • Ronsdorfer Str. 143
          • 40233 Düsseldorf
          • Deutschland

          • 0211 8793140
            0211 8793134
          • maschinen@knops.de
            www.knops.de
          #1022-E05838 · Planer-Type Milling M/C - Double Column

          JOBS - LINX BLITZ - - 2003 - FIDIA C20

          Technical details
          x-travel 1730 mm︱y-travel 2200 mm︱z-travel 900 mm︱Control FIDIA C20 ︱A-axis 210° (-90º +120º) deg︱c-axis 400º (+/-200) deg︱table surface area 2930 x 1780 mm︱workpiece weight 10 t/m²︱tool taper HSK63 + HSK100 ︱spindle turning speed range 24000 + 9000 U/min︱rapid traverse 70 m/min︱tool diameter 150 mm︱tool length - max. 300 mm︱weight of tools max. 20 kg︱total power requirement kW︱weight of the machine ca. 37 t︱dimensions of the machine ca. 6,7 x 6,0 x 4,9 m︱
          5-axis Milling Machine 3 axes Linear motors Siemens pressurized absolute scales +- 5µm Laser Blum tool measurement Toolchanger Automatic head change Head 2-axes, HSK63, 24.000 rpm, 29KW Vertical Head, HSK100, 9.000 rpm, 33KW Axe A 210 deg (-90 / +120) Axe C 400 deg (+/-200) 1 refrigerator for axes XY, 1 for the Z, and 1 for the spindle head Chip Conveyor (Belt) Working hours: 31.182 h
            x-travel 1730 mm
            y-travel 2200 mm
            z-travel 900 mm
            Control FIDIA C20
            A-axis 210° (-90º +120º) deg
            c-axis 400º (+/-200) deg
            table surface area 2930 x 1780 mm
            workpiece weight 10 t/m²
            tool taper HSK63 + HSK100
            spindle turning speed range 24000 + 9000 U/min
            rapid traverse 70 m/min
            tool diameter 150 mm
            tool length - max. 300 mm
            weight of tools max. 20 kg
            weight of the machine ca. 37 t
            dimensions of the machine ca. 6,7 x 6,0 x 4,9 m
            Description :
            5-axis Milling Machine

            3 axes Linear motors Siemens pressurized absolute scales +- 5µm
            Laser Blum tool measurement
            Toolchanger
            Automatic head change
            Head 2-axes, HSK63, 24.000 rpm, 29KW
            Vertical Head, HSK100, 9.000 rpm, 33KW
            Axe A 210 deg (-90 / +120)
            Axe C 400 deg (+/-200)
            1 refrigerator for axes XY, 1 for the Z, and 1 for the spindle head
            Chip Conveyor (Belt)

            Working hours: 31.182 h
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          •   
          •   


          Find a double column planer-type milling M/C here
          Discover why milling is a popular metalworking technique

          There are a wide variety of milling machines available to industry professionals today. One option is the planing process whereby the milling surface and the workpiece are moved in opposite directions to one another. This is in contrast to the process of shaping where the workpiece remains stationary. A double column planer-type milling M/C can be used to form a variety of materials from wood to heavy metals. Find the best in used machinery at LagerMaschinen your source for quality industrial machines.

          Planer-style milling machines offer many advantages

          Planing is a versatile approach to the machining of solids. Both flat surfaces and notched and grooved surfaces can be produced by a double column planer-type milling M/C. Planing is used mostly for the creating of linear surfaces as opposed to rounded ones. If you're in the market for a double column planer-type milling M/C why not check out the used models available at LagerMaschinen. You can save yourself time and money by shopping here for used machinery.

          LagerMaschinen: making the most of your time and money

          Investing in used machinery is a smart plan for your business. Moreover shopping for used equipment online not only makes the most of your budget but of your valuable time as well. For example you're looking for a double column planer-type milling M/C you can use LagerMaschinen's user-friendly site to browse by model price or location and find the best used machine for your business' needs. For the best selection in metalworking equipment and other industrial machinery check out LagerMaschinen.