Wire mesh welding machine

---

Constructin: EVG Type: MSM 3400/20000 Year: 1992 Working range (grids freely programmable) Ø min. 4 mm - max. 14 mm: Longitudinal wire: max. number: 65 pcs, max. length: 20.000 mm Cross wire: max. length: Ø 5.0 mm 3.000 mm from Ø 6.0 mm 3.400 mm min. length: 1.250 mm Electrical supply: 3 x 380 V, 50 Hz Welding capacity: at 50% ED: 2400 kVA Drive power: 134 kW The line consists of: ======================= - Material table with loading magazin, 20.000 mm - Longitudinal wire advancing device - Main machine body - Linear extracting device - Mesh mat turn around and stapling device, max. mesh mat length: 8000 mm, max. stapling height: 500 mm - electrical cabinets, SIEMENS S5 control More photos upon request.

---

In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. ***Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information.*** ***Changes and errors in the technical data and information as well Subject to prior sale!***

---

GRID WELDING MACHINE Constr. IDEAL Type: GA 400 / 1200 year: 1988 (control year 2003) condition: good working range: longitudinal wire-Ø: 3,0 - 8,0 mm cross wire-Ø: 2,0 - 6,5 mm grid width: max. 1.300 mm (in single operation) grid length: max. 2.500 mm The machine is equipped for double utilization welding = reduction of maximum grid width. welding cylinder: 8 pieces, electrode capacity max. 3 kN transformers: 4 pieces à 100 kVA nominal power at 50 % ED with water-cooled electrode holder connection 380 V, 50 Hz control 24 V direct current control SIEMENS S 5 infeed:pneumatically, with hand loading, adjustable guiding rulers for taking the longitudinalwire- or frame depots extraction:with grippers and tiltable rulers delivery scope: =============== - main machine body - cross wire depot for wire min. length 250 mm, meant for double operationt f - longitudinal wire compartment with infeeed heads - Transport device - frame magazine - PC with monitor control in seperate electrical cabinet - main electrical cabinet - various spares and accessories further photos: on demand weight: approx. 5 to.

working area 1,8,,,,,,,,,,,,,,,,6,0 mm︱working width 2700 mm︱Mesh length 50000 mm︱

---

COMPLETE AUTOMATIC WAVE MESH MAT WEAVING LINE Constr.: Jäger Type: RG 200 Year: 1978 Condition: good Weaving width: max. 2700 mm Weaving length: up to 50 m Mesh size: 8 - 72 mm wire- Ø: 1,8 - 6,0 mm Woofs/shots: at 2000 mm mesh width 30 woofs/shots per min. Motors: 3 kW loom motor, 5,5 kW plate shear motor Including following tools to produce following mesh widths: {For each mentioned mesh width it will be delivered each 1 set (consisting of 2 pieces) crimping wheels for the longitudinal wire and for the cross wire) Mesh width: Wire-Ø: tooth pitch 11,8 x 12,6 mm 1,8 - 2,0 mm 9,2 / 9,7 mm 15 x 15 mm 2,0 mm 11,4 mm 20 x 20 mm 2,0 - 2,5 mm 8,8 / 9,2 mm 20 x 20 mm 3,0 mm 15,4 / 15,2 mm 29 x 29 mm 4,0 mm 22 mm 30 x 30 mm 3,0 mm 13,2/ 13 mm 40 x 4 mm 4,0 mm 17,6 mm 50 x 50 mm 4,0 mm 15,4 / 15,2 mm 50 x 50 mm 5,0 mm 22 mm 72 x 72 mm 5,0 mm 22 mm The line consists of: ================ - Automatical wave mesh mat weaving machine JÄGER, Type: RG 200 - Wire crimping machine (cross wire feeding), JÄGER, Type: KMSa - mat shear, KÖLLSCHEN, Type: BKM, with pneumatic advancing device year: 1979, with 1 ground guiding rail - 2 pieces electrical wire decoiler, DRAWEBA, year: apporx. 1978 - Chain wire crimping machine JÄGER, Type: KMM - Electrical cabinet Total weight: approx. 7 - 8 to. (1 truck or 1 x 40' O.T. Container) NOTE: Due to competition reasons the owner wishes to sell the line NOT to members of the European Union as well as NOT to the states of former Yugoslavia.

---

M E S H W E L D I N G M A C H I N E Construction: SCHLATTER Type: MG 900 New: 2001 Condition: gut Working range: Longitudinal wire-Ø: max. 10 mm Transversal wire-Ø: max. 10 mm Mesh width: max. 1.250 mm Welding transformators: 3 pcs each 100 kva for max. 12 longitudinal wires Presently the machine is equipped for 6 longitudinal wires. Feeding of longitudinal wires: manually Traversal wire feeding: automatically, linear advancing MVL5 Control: New digital SIEMENS Control SIMATIC S 5 Inkl.: ==== Div. spare parts / accessories such as: gripper, zylinder, lower electrode Total weight: approx. 3.000 kg

working area 4,,,,,,12 mm︱working width 1200 mm︱Mesh length 8000 mm︱

---

Mesh welding machine Construction: SCHLATTER Type: Pg 12 / 12/ 100 New: 1993 Diameter: min. 4.0 mm - max. 12.0 mm Welding width: max. 1.200 mm No. of welding heads: approx. 10 Longitudinal wire: Max. no.: 16 pcs Ø 4.0 - 6.0 mm 50 mm 16 pcs Ø 4.0 - 8.0 mm 75 mm 16 pcs Ø 4.0 - 10.0 mm 100 mm 12 pcs Ø 4.0 - 12.0 mm 150 mm 8 pcs 200 mm 6 pcs 250 mm 5 pcs 300 mm 4 pcs Length: min. 400 mm; max. 8.000 mm Partition: as of 50 mm grid 25 mm up to 300 mm Overlap: min.: 25 mm Overlap:max. at beginning: 800 mm; max. end : 1.200 mm Ø combination: to a limited extend paired possible Cross wire: Length: min. 390 mm; max. 1.300 mm Partition: as of 15 mm - 1.500 variable Overlapping: min. 10 mm; max. 500 mm Power: 380 (400)V, 50 Hz Sn 593 kVA 50% Sn 420 kVA 100% Smax 750 kVA cos 0,8 - Linear extraction device - Control: SIEMENS S 5

---

Mesh welding machine Construction: SCHLATTER Type: Pg 12 / 6 / 70 New: 1972 Diameter: min. 4.0 mm - max. 10.0 (12.0) mm Welding width: max. 1.250 mm No. of welding heads: approx. 12 Longitudinal wire: Max. no.: 13 pcs Ø 4.0 - 6.0 mm 50 mm 13 pcs Ø 4.0 - 8.0 mm 75 mm 13 pcs Ø 4.0 - 10.0 mm 100 mm 12 pcs 150 mm 8 pcs 200 mm 6 pcs 250 mm 5 pcs 300 mm 4 pcs Length: min. 400 mm; max. 10.000 mm Partition: as of 50 mm grid 25 mm up to 300 mm Overlap: min.: 25 mm, Overlap:max. at beginning: 800 mm; max.: 1.200 mm Ø combination: to a limited extend paired possible Cross wire: Length: min. 200 mm; max. 1.300 mm Partition: as of 50 mm infinitely (2 different strokes; a multiple of the standard stroke) Overlapping: min. 10 mm; max. 500 mm Power: 380 (400)V, 50 Hz Sn 424 kVA 50% Sn 300 kVA 100% Smax 600 kVA cos 0,8