lathe-conventional-electronic

turning diameter over bed 300 mm︱turning diameter over slide rest 150 mm︱turning length 800 mm︱spindle bore mm︱turning speed range 42 - 2000 U/min︱feeds 0,011 - 0,91 mm/U︱tailstock quill taper MT 3 ︱total power requirement 2,2 kW︱weight of the machine ca. 0,75 t︱dimensions of the machine ca. 1,7 x 0,8 x 2,0 m︱

---

turning diameter 330 mm︱turning length 800 mm︱swing diameter over bed slide 170 mm︱speeds 46-1650 U/min︱spindle bore 38 mm︱morse taper 3 MK︱total power requirement 2,2 kW︱quill stroke 120 mm︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 1800 x 800 x 1300 mm︱

---

- 3-jaw chuck Ø 160 mm Rohm - MULTIFIX steel holder type B incl. 1x tool carrier - Movable tailstock

turning diameter 280 mm︱turning length 800 mm︱swing diameter over bed slide 155 mm︱speeds 50-1700 U/min︱spindle bore 24 mm︱morse taper 2 MK︱total power requirement 1,4 / 1,9 kW︱quill stroke 80 mm︱weight of the machine ca. 800 kg︱dimensions of the machine ca. 1800 x 1200 x 1200 mm︱

---

- Röhm 4-jaw chuck Ø 130 mm - Quick-change tool holder with 2 tool holders - Movable tailstock - live center

turning diameter 380 mm︱turning length 1000 mm︱swing diameter over bed slide 240 mm︱turning dia. in gap 585 mm︱speeds 40 -2200 U/min︱tailstock quill taper MT 4 MK ︱bed width 300 mm︱spindle bore 54 mm︱quill stroke 140 mm︱total power requirement 5,5 kW︱weight of the machine ca. 1254 kg︱dimensions of the machine ca. 2240 x 1220 x 1400 mm︱

---

turning diameter 330 mm︱turning length 800 mm︱swing diameter over bed slide 170 mm︱speeds 12 - 2800 U/min︱spindle bore 30 mm︱morse taper 3 MK︱total power requirement 2,2 kW︱quill stroke 120 mm︱weight of the machine ca. 850 kg︱dimensions of the machine ca. 1900 x 800 x 1700 mm︱

---

turning diameter 400 mm︱turning length 1000 mm︱swing diameter over bed slide 240 mm︱turning dia. in gap 560 mm︱spindle bore 52 mm︱turning speeds (12) 45 - 2000 U/min U/min︱bed width 210 mm︱spindle taper MK 4 ︱quill travel 100 mm︱total power requirement 2,0 / 2,4 kW︱weight of the machine ca. 0,82 t︱dimensions of the machine ca. 1,9 x 0,8 x 1,6 m︱

---

turning diameter 360 mm︱turning length 1000 mm︱swing diameter over bed slide 220 mm︱turning dia. in gap 502 mm︱spindle bore 52 mm︱turning speeds 70 - 2000 U/min︱bed width 185 mm︱spindle taper 55029 D 1-5 ︱tail stock 3 MK ︱quill travel 100 mm︱total power requirement 1,5 /2,2 kW︱weight of the machine ca. 0,58 t︱dimensions of the machine ca. 1,83 x 0,76 x 1,6 m︱

---

turning diameter 350 mm︱turning length 1000 mm︱swing diameter over bed slide -- mm︱turning diameter in the gap 450 mm︱spindle bore 40 mm︱turning speeds 70 - 2000 U/min︱bed width 180 mm︱spindle taper 55029 D 1-4 ︱tail stock 3 MK ︱quill travel 110 mm︱total power requirement 1,5 kW︱weight of the machine ca. 0,53 t︱dimensions of the machine ca. 1,73 x 0,7 x 1,35 m︱

---

turning diameter 330 mm︱turning length 830 mm︱swing diameter over bed slide 196 mm︱Swingdiameter in the bed bridge 170 ︱centre height 165 mm︱centre distance 830 mm︱Turning length in the bed bridge 430 ︱reus 16 (70-2000) U/min︱tail stock MK 3 ︱quill stroke 110 mm︱diameter of quill 32 mm︱spindle taper DIN ISO 702-2 Nr. 4 ︱spindle bore 38 mm︱spindle cone MK 5 ︱feed längs 32 / 0,052 1,392 m/min︱feed plan 3,2 / 0,014 0,38 m/min︱total power requirement kW︱weight of the machine ca. 0,52 t︱dimensions of the machine ca. 1,7 x 0,75 x 1,6 m︱

---

Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762

turning diameter 420 mm︱turning length 1500 mm︱swing diameter over bed slide 250 mm︱Swingdiameter in the bed bridge 590 mm︱centre height 210 mm︱Turning length in the bed bridge 260 mm︱reus 16 (45-1800) U/min︱tail stock MK 4 ︱quill stroke 120 mm︱diameter of quill 50 mm︱spindle taper DIN ISO 702-2 Nr. 6 ︱spindle bore 52 mm︱spindle cone MK 6 ︱feed längs 17 / 0,05 - 1,7 m/min︱feed plan 17 / 0,025 - 0,85 m/min︱total power requirement 4,6 kW︱weight of the machine ca. 1340 kg︱dimensions of the machine ca. 2440 x 915 x 1375 mm︱

---

Fully equipped leading and tension spindle lathes. TH 4215 with digital position indicator DPA 21 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in an oil bath - Gears run smoothly, hardened and ground with 2 adjustable ones Precision tapered roller bearings - Handwheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric gradients in the range of 0.2 to 14 mm / rev and all Inch threads in the range of 72 - 2 threads per inch without replacing the Change gears can be set using the switch lever in the control panel - Clockwise / counterclockwise rotation on the bed slide can be switched using the switch spindle - Central lubrication in the bed slide - Base and machine bed made of Meehanite cast in one piece - Lead screw cover - Emergency stop device with foot actuation - Safety handwheels with push-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground Gray cast iron - Coolant device with separate coolant tank with level indicator and Oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip protection Models TH 4210D and TH 4215D with digital position indicator DPA21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Live steady rest passage Ø 10 - 75 mm - LED machine light - Reduction sleeve MK 6 / MK 4 - Fixed center point MK 4 - Change gears set - Position stop with fine adjustment - Initial machine filling with quality oil - operating tool ** Including special accessories OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm ** Quick change holder SWH3-E set ** 6x leveling feet SE85 with vibration isolation plate

---

---

turning diameter 1050 mm︱turning length 6000 mm︱swing diameter over bed slide 750 mm︱spindle diameter 95 mm︱turning speeds 5-500 (16x) U/min︱faceplate with 4 clamps dia. 1000 mm︱total power requirement 27/41 kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

turning length 1250 mm︱turning diameter over bed 400 mm︱turning diameter over slide rest 246 mm︱turning dia. in gap 585 mm︱turning speed range 15 - 2500 U/min︱spindle bore 54,0 mm︱quill stroke 140 mm︱morse taper 4 MK︱feed range 0,036 - 1,2 mm/U︱bed width 318 mm︱work height max. 1050 mm︱travel -x axis Plan 250 mm︱travel -z axis Ober 130 mm︱spindle nose D1-6" Camlock ︱total power requirement 7,5 kW︱weight of the machine ca. 1500 kg.︱dimensions of the machine ca. 2500 x 1100 x 1300 mm︱

---

** from a training workshop (!!) The Colchester Triumph VS or Harrison V390 is the "all-rounder". Of the This corresponds to heavy machining to fine precision finishes Precision machine Requirements from modern tool making, mold making or training company. Furnishing: - RÖHM 4-jaw chuck Ø 200 mm, with replacement jaws - FAGOR digital display - model NVP 300 - infinitely variable speed adjustment, with digital display (Vario) - 4x steel holder - Movable tailstock - adjustable bed stop - chuck key - Machine swing feet - Cooling device - rear mudguard - Instruction manual + spare parts list

Distance between centers 4000 mm︱Centre height 400 mm︱Swing over bed 800 mm ø︱Swing over support 510 mm ø︱Swing in the gap 1100 mm ø︱Spindle boring 250 mm ø︱Steady rest 350 mm ø︱3-Jaw chuck 630 mm ø︱Machine dimensions (lxwxh) 6500 x 2200 x 2000 mm︱Machine weight 7300 kg︱

---

turning diameter - mm︱turning length 1500 mm︱swing diameter over bed slide 400 mm︱

---

Distance between centers: 1500 mm Centre height: 200 mm Swing over bed: 400 mm ø Swing over support: 220 mm ø Swing in the gap: 550 mm ø Spindle boring: 60 mm ø Steady rest: 200 mm ø 3-Jaw chuck: 250 mm ø Quick change toolholders: 3 Revolving center Digital read-out Rapid traverse on support

turning diameter 560 mm︱turning length 1800 mm︱swing diameter over bed slide mm︱centre distance mm︱swing diameter mm︱travel of tool-carriage mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱

---

Distance between centers 1000 mm︱Centre height 210 mm︱Swing over bed 420 mm ø︱Swing over support 220 mm ø︱Spindle boring 55 mm ø︱

---

3-jaw Fokardt F250 ** Machine is not working ** The CNC control is empty No parameters available

︱ ︱ ︱

---

turning length 1100 mm︱swing diameter over bed slide 570 mm︱face diameter 340 mm︱turning dia. in gap 600 mm︱spindle turning speed range 1-2500 U/min︱Control ︱total power requirement 20 kW︱weight of the machine ca. 3,2 t︱dimensions of the machine ca. 3,0 x 1,65 x 1,75 m︱turning diameter mm︱

---

including multifix including lathe chuck The machine was used in production, the spindle is noisy.

serial number 2013 ︱centre distance 800 mm︱swing diameter over bed slide 300 mm︱steady ︱ ︱

---

Distance between centers 4000 mm︱Centre height 540 mm︱Swing over bed 1080 mm ø︱Spindle boring 72 mm ø︱Revolutions 1,4 - 315 RPM︱Motor 62 kW︱

---

turning diameter 1250 mm︱turning length 0 mm︱swing diameter over bed slide 00 mm︱centre distance 11000 mm︱total power requirement 00 kW︱weight of the machine ca. 00 t︱dimensions of the machine ca. 00 m︱

---

Distance between centers 1500 mm︱Centre height 210 mm︱Swing over bed 400 mm ø︱Swing over support 200 mm ø︱Spindle boring 62 mm ø︱3-Jaw chuck 250 mm ø︱

---

Quick change holder