European network of stockholding machinery dealers

Category:
    Manufacturer:
      Machines:
        Trader:

          Lathe - cycle-controlled

          Machinelist: Lathe - cycle-controlled


          Lathe - cycle-controlled

          used Lathes Lathe -  cycle-controlled HARRISON ALPHA 1550XC


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1560ALP · Lathe - cycle-controlled

          HARRISON - ALPHA 1550XC - - 2021 - FANUC Oi TF

          Technical details
          554 mm︱ 2000 mm︱ 277 mm︱ 104 mm︱ 400 mm︱ 2000 U/minD1-11 DIN 5502995 mm︱ 145 mm︱
            554 mm
            2000 mm
            277 mm
            104 mm
            400 mm
            2000 U/min
            D1-11 DIN 55029
            95 mm
            145 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled COLCHESTER MULTITURN 4000


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1548MUL · Lathe - cycle-controlled

          COLCHESTER - MULTITURN 4000 - - 2021 - SIEMENS 828D

          Technical details
          554 mm︱ 2000 mm︱ 277 mm︱ 104 mm︱ 400 mm︱ 2000 U/minD1-11 DIN 5502995 mm︱ 145 mm︱
            554 mm
            2000 mm
            277 mm
            104 mm
            400 mm
            2000 U/min
            D1-11 DIN 55029
            95 mm
            145 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled HARRISON ALPHA 1350XS


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1375_AL · Lathe - cycle-controlled

          HARRISON - ALPHA 1350XS - - 2021 - FANUC Oi TF

          Technical details
          350 mm︱ 0650 mm︱ 175 mm︱ 42 mm︱ 315 mm︱ 3500 U/minD1-4 DIN 5502963 mm︱ 140 mm︱
            350 mm
            0650 mm
            175 mm
            42 mm
            315 mm
            3500 U/min
            D1-4 DIN 55029
            63 mm
            140 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled HARRISON ALPHA 1460XS


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1385_AL · Lathe - cycle-controlled

          HARRISON - ALPHA 1460XS - - 2021 - FANUC Oi TF

          Technical details
          460 mm︱ 1500 mm︱ 230 mm︱ 78 mm︱ 400 mm︱ 2200 U/minD1-8 DIN 5502995 mm︱ 145 mm︱
            460 mm
            1500 mm
            230 mm
            78 mm
            400 mm
            2200 U/min
            D1-8 DIN 55029
            95 mm
            145 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled HARRISON ALPHA 1550XS


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1387_AL · Lathe - cycle-controlled

          HARRISON - ALPHA 1550XS - - 2021 - FANUC Oi TF

          Technical details
          554 mm︱ 2000 mm︱ 277 mm︱ 104 mm︱ 400 mm︱ 2000 U/minD1-11 DIN 5502995 mm︱ 145 mm︱
            554 mm
            2000 mm
            277 mm
            104 mm
            400 mm
            2000 U/min
            D1-11 DIN 55029
            95 mm
            145 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled HARRISON ALPHA 1400XS


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1377_AL · Lathe - cycle-controlled

          HARRISON - ALPHA 1400XS - - 2021 - FANUC Oi TF

          Technical details
          400 mm︱ 1250 mm︱ 200 mm︱ 55 mm︱ 315 mm︱ 2700 U/minD1-6 DIN 5502973 mm︱ 140 mm︱
            400 mm
            1250 mm
            200 mm
            55 mm
            315 mm
            2700 U/min
            D1-6 DIN 55029
            73 mm
            140 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MMT-germany LC / LD / BNC / BN


          • Meister Maschinen
          • Overhagener Weg 44
          • 59597 Erwitte
          • Deutschland

          • +49 (0) 2943-870946
            +49 (0) 2943-870885
          • info@meister-maschinen.com
            www.meister-maschinen.com
          #2005-10088 · Lathe - cycle-controlled

          MMT-germany - LC / LD / BNC / BN - - 2020 - Fanuc/ Fagor/ Siemens

          Technical details
          turning diameter 750-3550 mm mm︱turning length 1000-12000 mm︱control Siemens / Fanuc 0︱total power requirement kW︱weight of the machine ca. t︱required space m︱
            turning diameter 750-3550 mm mm
            turning length 1000-12000 mm
            control Siemens / Fanuc 0
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled HARRISON ALPHA 1400XS


          • Volz Werkzeugmaschinen
          • Friedrich-Ebert Straße 78-80
          • 58454 Witten-Annen
          • Deutschland

          • +49 (0) 23 02 / 98 72 – 0
            +49 (0) 23 02 / 98 72 - 50
          • anfrage@volz-witten.de
            www.volz-witten.de
          #1134-1470LAG · Lathe - cycle-controlled

          HARRISON - ALPHA 1400XS - - 2020 - FANUC Oi TF

          Technical details
          400 mm︱ 1250 mm︱ 200 mm︱ 55 mm︱ 315 mm︱ 2700 U/minD1-6 DIN 5502973 mm︱ 140 mm︱
            400 mm
            1250 mm
            200 mm
            55 mm
            315 mm
            2700 U/min
            D1-6 DIN 55029
            73 mm
            140 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled Style  Style510x1350


          • Meister Maschinen
          • Overhagener Weg 44
          • 59597 Erwitte
          • Deutschland

          • +49 (0) 2943-870946
            +49 (0) 2943-870885
          • info@meister-maschinen.com
            www.meister-maschinen.com
          #2005-102014 · Lathe - cycle-controlled

          Style - Style510x1350 - - 2019 - Style

          Technical details
          turning diameter 510 mm︱turning length 1350 mm︱control Style 0︱total power requirement kW︱weight of the machine ca. 2750 t︱required space m︱
            turning diameter 510 mm
            turning length 1350 mm
            control Style 0
            weight of the machine ca. 2750 t
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled UNITECH UT 560


          • WeMa Antonius Pigge GmbH
          • Barnstorfer Str. 3
          • 49424 Goldenstedt
          • Deutschland

          • +49 (0)444496700
            +49 (0)4444967010
          • info@wema-pigge.de
            www.wema-pigge.de
          #2031-3666 · Lathe - cycle-controlled

          UNITECH - UT 560 - - 2014 - Siemens Sinumerik 828 D

          Technical details
          greates pass round over bed 560 mm︱turning length 1500 mm︱control Siemens Sinumerik 828 D ︱swing diameter over slide rest 390 mm︱spindle speed: 2400 Upm︱bed width 345 mm︱spindle bore 80 mm︱diameter of quill 75 mm︱quill stroke 200 mm︱tailstock quill taper MT 5 ︱3-jaw chuck Schunk Rota S 315 ︱3-jaw-chuck diameter 315 mm︱main drive 14 kW︱weight of the machine ca. 2900 kg︱dimensions of the machine ca. m︱
          removeable bed bridge user interface control: Shopturn hydraulical tailstock quill adjustment key bar chuck Schunk Rota S+ 2.0 315-92 quick change tool holder Choromant Capto
            greates pass round over bed 560 mm
            turning length 1500 mm
            control Siemens Sinumerik 828 D
            swing diameter over slide rest 390 mm
            spindle speed: 2400 Upm
            bed width 345 mm
            spindle bore 80 mm
            diameter of quill 75 mm
            quill stroke 200 mm
            tailstock quill taper MT 5
            3-jaw chuck Schunk Rota S 315
            3-jaw-chuck diameter 315 mm
            main drive 14 kW
            weight of the machine ca. 2900 kg
            Description :
            removeable bed bridge

            user interface control: Shopturn

            hydraulical tailstock quill adjustment

            key bar chuck Schunk Rota S+ 2.0 315-92

            quick change tool holder Choromant Capto




          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled DMT KERN CD 480 x 2000


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032886 · Lathe - cycle-controlled

          DMT KERN - CD 480 x 2000 - - 2013 - Heidenhain

          Technical details
          control Heidenhain ︱greates pass round over bed 475 mm︱swing diameter over slide rest 260 mm︱total power requirement 25 kW︱weight of the machine ca. 5 t︱
          L.-Nr. 3.2-886 1 gebr. Zyklendrehmaschine Kern CD480, Baujahr 2013 1 used Cycle Controlled Lathe Kern CD480, built 2013 Heidenhain Steuerung Handspannzagenfutter Revolver Spänewanne Reitstock Heidenhain control Hand collet chuck revolver chip tank tail stock Technische Daten / technical details: Spitzenweite / center to center 2000 mm Umlauf-Ø über Bett / turning Ø over bed 480 mm Umlauf-Ø über Schlitten / turning Ø over sledge 260 mm Reitstockaufnahme / tail stock taper MK5 Antriebsleistung / drive capacity 25 kW Gewicht der Maschine / weight ca 5000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            control Heidenhain
            greates pass round over bed 475 mm
            swing diameter over slide rest 260 mm
            total power requirement 25 kW
            weight of the machine ca. 5 t
            Description :
            L.-Nr. 3.2-886
            1 gebr. Zyklendrehmaschine Kern CD480, Baujahr 2013
            1 used Cycle Controlled Lathe Kern CD480, built 2013

            Heidenhain Steuerung
            Handspannzagenfutter
            Revolver
            Spänewanne
            Reitstock
            Heidenhain control
            Hand collet chuck
            revolver
            chip tank
            tail stock

            Technische Daten / technical details:
            Spitzenweite / center to center 2000 mm
            Umlauf-Ø über Bett / turning Ø over bed 480 mm
            Umlauf-Ø über Schlitten / turning Ø over sledge 260 mm
            Reitstockaufnahme / tail stock taper MK5
            Antriebsleistung / drive capacity 25 kW
            Gewicht der Maschine / weight ca 5000 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.




          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E 175


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03141 · Lathe - cycle-controlled

          WEILER - E 175 - - 2012 - cycle-controlled

          Technical details
          turning diameter 1750 mm︱turning length 4000 mm︱control cycle-controlled ︱centre height 875 mm︱centre distance 4000 mm︱swing in the crank max. 1850 mm︱length of the crank in front of the faceplate 575 mm︱max. workpiece weight 14000 kg︱working spindle: ︱number of gear stages 2 ︱turning speed range 1-700 1/min︱spindle bore 262 mm︱faceplate diameter max. 1400 mm︱chucking diameter max. 800 mm︱max. torque 13600 Nm︱Slide: ︱worktool system Sauter 4-fold ︱longitudinal stroke 4000 mm︱face stroke 790 mm︱Tailstock:
          Equipment/ accessories: - 1 steady rest - 1 boring bar holder - div. steel holder - documentation
            turning diameter 1750 mm
            turning length 4000 mm
            control cycle-controlled
            centre height 875 mm
            centre distance 4000 mm
            swing in the crank max. 1850 mm
            length of the crank in front of . 575 mm
            max. workpiece weight 14000 kg
            number of gear stages 2
            turning speed range 1-700 1/min
            spindle bore 262 mm
            faceplate diameter max. 1400 mm
            chucking diameter max. 800 mm
            max. torque 13600 Nm
            worktool system Sauter 4-fold
            longitudinal stroke 4000 mm
            face stroke 790 mm
            Description :
            Equipment/ accessories:
            - 1 steady rest
            - 1 boring bar holder
            - div. steel holder
            - documentation
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ 1000


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03140 · Lathe - cycle-controlled

          SEIGER - SLZ 1000 - - 2010 - Siemens Sinumerik 840D

          Technical details
          turning diameter 1.250 mm︱turning length 6.000 mm︱control Siemens Sinumerik 840D ︱working area ︱centre distance 6.000 mm︱greates pass round over bed 1.250 mm︱swing diameter over face slide 850 mm︱radial face slide adjustment 680 mm︱spindle bore 130 mm︱Main drive kW︱Speed range - up to 1-900 U/min︱max. torque at the spindle 100% ED ca. 9000 Nm︱feed motor ︱feed power longitudinal/face 24000 / 16000 N︱rapid speed 7 / 4 m/min︱tail stock ︱diameter of quill 160 mm︱quill stroke 3315 mm︱workpiece weights ︱between centers 5000 kg︱
          Equipment: - 1x hydraulic steady rest - 2x standard steady rest - 1x face plate - 2x 3-jaw chucks - Tool cabinet with multi-way steel holders and steels - various tips - various jaw chucks - chip conveyor
            turning diameter 1.250 mm
            turning length 6.000 mm
            control Siemens Sinumerik 840D
            centre distance 6.000 mm
            greates pass round over bed 1.250 mm
            swing diameter over face slide 850 mm
            radial face slide adjustment 680 mm
            spindle bore 130 mm
            Speed range - up to 1-900 U/min
            max. torque at the spindle 100% . ca. 9000 Nm
            feed power longitudinal/face 24000 / 16000 N
            rapid speed 7 / 4 m/min
            diameter of quill 160 mm
            quill stroke 3315 mm
            between centers 5000 kg
            Description :
            Equipment:
            - 1x hydraulic steady rest
            - 2x standard steady rest
            - 1x face plate
            - 2x 3-jaw chucks
            - Tool cabinet with multi-way steel holders and steels
            - various tips
            - various jaw chucks
            - chip conveyor
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E70


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032885 · Lathe - cycle-controlled

          WEILER - E70 - - 2010 - Weiler D3

          Technical details
          turning diameter 720 mm︱control Weiler D3 ︱centre distance 4500 mm︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱turning length mm︱
          Weiler control 3-jaw chuck Parat tool holder chip conveyor tail stock fixed steady rest coolant device Technische Daten / technical details: Spitzenweite / center to center 4500 mm Umlauf-Ø über Bett / turning Ø over bed 720 mm Umlauf-Ø über Schlitten / turning Ø over sledge 430 mm Drehzahlbereich (2-stufig) / spindle speed range (2-steps) 1-1800 UpM /rpm Spindelbohrung / spindle hole 106 mm Eilgang längs/plan / rapid feed Z/X 10/5 m/min Reitstockaufnahme / tail stock taper MK 6 Antriebsleistung 60%/100%ED / drive capacity 60%/100%ED 37/30 kW Gewicht der Maschine / weight ca 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 720 mm
            control Weiler D3
            centre distance 4500 mm
            Description :
            Weiler control
            3-jaw chuck
            Parat tool holder
            chip conveyor
            tail stock
            fixed steady rest
            coolant device

            Technische Daten / technical details:
            Spitzenweite / center to center 4500 mm
            Umlauf-Ø über Bett / turning Ø over bed 720 mm
            Umlauf-Ø über Schlitten / turning Ø over sledge 430 mm
            Drehzahlbereich (2-stufig) / spindle speed range (2-steps) 1-1800 UpM /rpm
            Spindelbohrung / spindle hole 106 mm
            Eilgang längs/plan / rapid feed Z/X 10/5 m/min
            Reitstockaufnahme / tail stock taper MK 6
            Antriebsleistung 60%/100%ED / drive capacity 60%/100%ED 37/30 kW
            Gewicht der Maschine / weight ca 7500 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.



          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled SEIGER SLZ420E


          • Marcels Maschinen AG
          • Anthoptstrasse 11
          • 8222 Beringen (Schaffhausen)
          • Schweiz

          • (0041) 44 872 3400
            (0041) 44 872 3403
          • info@marcels-maschinen.ch
            http://www.marcels-maschinen.ch
          #1065-4667 · Lathe - cycle-controlled

          SEIGER - SLZ420E - - 2010 - SIEMENS 840D Sol.Line

          Technical details
          turning diameter 430 mm︱turning length 1000 mm︱control SIEMENS 840D Sol.Line ︱swing diameter over slide rest 225 mm︱centre distance 1150 mm︱spindle turning speed range -3600 U/min︱turret head 8 Pos. ︱weight of the machine ca. 3.6 t︱dimensions of the machine ca. 4x2x2 m︱
          Misc.accessories More details on www.marcels-maschinen.ch
            turning diameter 430 mm
            turning length 1000 mm
            control SIEMENS 840D Sol.Line
            swing diameter over slide rest 225 mm
            centre distance 1150 mm
            spindle turning speed range -3600 U/min
            turret head 8 Pos.
            weight of the machine ca. 3.6 t
            dimensions of the machine ca. 4x2x2 m
            Description :
            Misc.accessories

            More details on www.marcels-maschinen.ch
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E40


          • Matthias Ehlers Werkzeugmaschinen
          • Nikolaus-Otto-Straße 19 + 21
          • 22946 Trittau
          • Deutschland

          • +49 (0)4154 - 986 99 12
            +49 (0)4154 - 986 99 14
          • anfrage@ehlers-wzm.de
            www.ehlers-wzm.de
          #2033-2021082 · Lathe - cycle-controlled

          WEILER - E40 - - 2010 - Siemens 810D, Weiler-Ober fläc

          Technical details
          turning diameter über Bett 435 mm︱turning length 1.000 mm︱control Siemens 810D, Weiler-Ober fläche︱centre distance 1.000 mm︱centre height 210 mm︱greates pass round over bed 435 mm︱swing over plan sled 200 mm︱bed width 330 mm︱spindle head nach DIN55027 ︱spindle: Ø 110mm im vorderen Lager ︱spindle bore 66 mm︱taper bore 70 metr an Hauptspindel ︱drive capacity - main spindle 60% / 100% ED 20,5kW / 17 kW︱max. torque an Spindel (60%ED) 450 Nm︱turning speed range stufenlos 1-3.500 min/-1︱power feed longitudinal 8.000 N︱power feed coss 5.000 N︱rapid travel - longitudinal/face 10 m/min / 5 m/min︱tail stock ︱pinole diameter 65 mm︱
            turning diameter über Bett 435 mm
            turning length 1.000 mm
            control Siemens 810D, Weiler-Ober fläche
            centre distance 1.000 mm
            centre height 210 mm
            greates pass round over bed 435 mm
            swing over plan sled 200 mm
            bed width 330 mm
            spindle head nach DIN55027
            spindle: Ø 110mm im vorderen Lager
            spindle bore 66 mm
            taper bore 70 metr an Hauptspindel
            drive capacity - main spindle 60% / 100% ED 20,5kW / 17 kW
            max. torque an Spindel (60%ED) 450 Nm
            turning speed range stufenlos 1-3.500 min/-1
            power feed longitudinal 8.000 N
            power feed coss 5.000 N
            rapid travel - longitudinal/face 10 m/min / 5 m/min
            pinole diameter 65 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MONFORTS KNC 500 Cycle Turn


          • SK Maschinen-Service GmbH
          • Tackweg 4
          • 47918 Tönisvorst
          • Deutschland

          • 02151 79350
            02151 793535
          • info@sk-maschinen.de
            www.sk-maschinen.de
          #1038-20949 · Lathe - cycle-controlled

          MONFORTS - KNC 500 Cycle Turn - - 2009 - Monforts Euroturn

          Technical details
          turning diameter 520 mm︱turning length 1500 mm︱control Monforts Euroturn ︱turning diameter over bed slide 290 ︱face slide travel 240 mm︱drive of main spindle 11 kW︱spindle turning speed range 7-2600 U/min︱quick change tool holder: Parat ︱spindle bore 77 mm︱spindle nose DIN 55026 8 ︱tailstock quill taper MT 5 ︱tailstock - quill dia 80 mm︱tailstock - travel of quill 160 mm︱weight of the machine ca. 3 t︱dimensions of the machine ca. 3,3x1,6x1,9 m︱
          - with chip conveyor without center, without jaws and without tool holder.
            turning diameter 520 mm
            turning length 1500 mm
            control Monforts Euroturn
            turning diameter over bed slide 290
            face slide travel 240 mm
            drive of main spindle 11 kW
            spindle turning speed range 7-2600 U/min
            quick change tool holder: Parat
            spindle bore 77 mm
            spindle nose DIN 55026 8
            tailstock quill taper MT 5
            tailstock - quill dia 80 mm
            tailstock - travel of quill 160 mm
            weight of the machine ca. 3 t
            dimensions of the machine ca. 3,3x1,6x1,9 m
            Description :
            - with chip conveyor
            without center, without jaws and without tool holder.
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled MICROCUT


          • Bästlein
          • Augsburger Str. 56
          • 89312 Günzburg
          • Deutschland

          • +49 (0) 8221 93037-0
            +49 (0) 8221 93037-29
          • info@baestlein.com
            www.baestlein.com
          #1123-3010633 · Lathe - cycle-controlled

          MICROCUT - - - 2008 -

          Technical details
          turning diameter 250 mm︱turning length 1000 mm︱control ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
            turning diameter 250 mm
            turning length 1000 mm
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled COLCHESTER Alpha 1400 XT


          • Gustav Schönberger GmbH
          • Hünderstr. 14
          • 74080 Heilbronn
          • Deutschland

          • (0049)7131 46060
            (0049)7131 460620
          • schoenberger@gsh-maschinen.de
            www.gsh-maschinen.de
          #1036-032872 · Lathe - cycle-controlled

          COLCHESTER - Alpha 1400 XT - - 2008 - Fanuc

          Technical details
          turning diameter 400 mm︱turning length 1000 mm︱control Fanuc ︱total power requirement kW︱weight of the machine ca. t︱dimensions of the machine ca. m︱
          Fanuc control 3-jaw chuck 4-fold Parat tool holder device tailstock Technische Daten / technical details: Spitzenweite / center to center 1250 mm Umlauf-Ø über Bett / turning Ø over bed 400 mm Umlauf-Ø über Schlitten / turning Ø over sledge 245 mm Verfahrweg X-Achse / travel x-axis 245 mm Verfahrweg Z-Achse / travel z-axis 1163 mm Drehzahlbereich / spindle speed 1-2700 UpM /rpm Spindelbohrung / spindle hole 54 mm Eilgang X, Z / rapid feed x, z 8, 10 m/min Antriebsleistung / drive capacity 22 kW Gewicht ca. / weight ca. 2600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.
            turning diameter 400 mm
            turning length 1000 mm
            control Fanuc
            Description :
            Fanuc control
            3-jaw chuck
            4-fold Parat tool holder device
            tailstock

            Technische Daten / technical details:
            Spitzenweite / center to center 1250 mm
            Umlauf-Ø über Bett / turning Ø over bed 400 mm
            Umlauf-Ø über Schlitten / turning Ø over sledge 245 mm
            Verfahrweg X-Achse / travel x-axis 245 mm
            Verfahrweg Z-Achse / travel z-axis 1163 mm
            Drehzahlbereich / spindle speed 1-2700 UpM /rpm
            Spindelbohrung / spindle hole 54 mm
            Eilgang X, Z / rapid feed x, z 8, 10 m/min
            Antriebsleistung / drive capacity 22 kW
            Gewicht ca. / weight ca. 2600 kg
            Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
            Technical data, accessories and description of the machine are not binding.



          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PBR T 35 SNC x 2000


          • Isabelle Knops
          • Opladener Str. 126
          • 40789 Monheim am Rhein
          • Deutschland

          • +49 (0)2173-4999611
            +49 (0)2173-8546560
          • isabelle.knops@isabelleknops.com
            www.isabelleknops.com
          #2013-E0344 · Lathe - cycle-controlled

          PBR - T 35 SNC x 2000 - - 2007 - FAGOR

          Technical details
          turning diameter 720 mm︱turning length 2.000 mm︱control FAGOR ︱total power requirement 55 kW︱weight of the machine ca. 5,8 t︱
          Lathe - cycle controled / Brand: PBR - Perico Baroni Raimondi / Type: T 35 SNC x 2000 / Year of construction: 2007 The machine can be inspected by appointment under working condition. Very well maintained, ready to use condition. 1 x weekly cleaning of the machine, continuous supervision of the machine's condition of the machine by its own maintenance, 1 x annual maintenance by the by the manufacturer's service staff. - Guideways are in very good condition - Less than 1-shift operation. TECHNICAL DATA: - Control: FAGOR Working area: - Swing diameter over bed: 720 mm - Swing diameter over cross slide: 425 mm - Turning length: 2.000 mm - Speed range: 2.000 rpm - Gear steps: 2 - Max. Workpiece weight between centres and steady rests: 4 tons - Max. Workpiece weight between centres: 3 tons - Max. Workpiece weight flying: 1,2 tons - Total power requirement: 55 kW - Machine weight approx.: 5,8 tons EQUIPMENT: - Chip conveyor - Power chuck Ø: 400 mm - Steady rest manual Ø: 20 - 200 mm - 2 pieces of MULTIFIX Quick-change steel holder - Various jaws - Documentation - CE marking Without guarantee for completeness and correctness of the technical information and the equipment.
            turning diameter 720 mm
            turning length 2.000 mm
            control FAGOR
            total power requirement 55 kW
            weight of the machine ca. 5,8 t
            Description :
            Lathe - cycle controled / Brand: PBR - Perico Baroni Raimondi /
            Type: T 35 SNC x 2000 / Year of construction: 2007

            The machine can be inspected by appointment under working condition.

            Very well maintained, ready to use condition.
            1 x weekly cleaning of the machine, continuous supervision of the machine's
            condition of the machine by its own maintenance, 1 x annual maintenance by the
            by the manufacturer's service staff.
            - Guideways are in very good condition -

            Less than 1-shift operation.

            TECHNICAL DATA:
            - Control: FAGOR

            Working area:
            - Swing diameter over bed: 720 mm
            - Swing diameter over cross slide: 425 mm
            - Turning length: 2.000 mm

            - Speed range: 2.000 rpm
            - Gear steps: 2

            - Max. Workpiece weight between centres and steady rests: 4 tons
            - Max. Workpiece weight between centres: 3 tons
            - Max. Workpiece weight flying: 1,2 tons

            - Total power requirement: 55 kW
            - Machine weight approx.: 5,8 tons

            EQUIPMENT:
            - Chip conveyor
            - Power chuck Ø: 400 mm
            - Steady rest manual Ø: 20 - 200 mm
            - 2 pieces of MULTIFIX Quick-change steel holder
            - Various jaws
            - Documentation
            - CE marking

            Without guarantee for completeness and correctness of the technical information
            and the equipment.
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E150


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03136 · Lathe - cycle-controlled

          WEILER - E150 - - 2007 - cycle-controlled

          Technical details
          turning diameter 1500 mm︱turning length 3000 mm︱control cycle-controlled ︱centre height 750 mm︱greates pass round over bed 1500 mm︱Swing diameter over cross slide 1030 mm︱swing in the crank 1600 mm︱max. workpiece weight 13000 kg︱working spindle: ︱number of gear stages 2 ︱turning speed range 1-700 1/min︱spindle bore 262 mm︱faceplate diameter 1400 mm︱max. torque 10000 Nm︱support construction ︱worktool system Sauter 4-times ︱bit feeder section 40x40 mm︱longitudinal stroke 3000 mm︱face stroke 790 mm︱tail stock
          Equipment / accessories: - 2 chip conveyor - faceplate - div. tool holder
            turning diameter 1500 mm
            turning length 3000 mm
            control cycle-controlled
            centre height 750 mm
            greates pass round over bed 1500 mm
            Swing diameter over cross slide 1030 mm
            swing in the crank 1600 mm
            max. workpiece weight 13000 kg
            number of gear stages 2
            turning speed range 1-700 1/min
            spindle bore 262 mm
            faceplate diameter 1400 mm
            max. torque 10000 Nm
            worktool system Sauter 4-times
            bit feeder section 40x40 mm
            longitudinal stroke 3000 mm
            face stroke 790 mm
            Description :
            Equipment / accessories: - 2 chip conveyor
            - faceplate
            - div. tool holder
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled CHEVALIER FCL 2160 S


          • FIMOTEC
          • 20 RUE AMPERE
          • 67500 HAGUENAU
          • Frankreich

          • +33 (0)388720247
            +33 (0)388936066
          • FIMOTEC@WANADOO.FR
            WWW.FIMOTEC.FR
          #1105-03184 · Lathe - cycle-controlled

          CHEVALIER - FCL 2160 S - - 2007 - SIEMENS 810 D

          Technical details
          greates pass round over bed 540 mm︱turn - diameter over facing slide 310 mm︱centre distance 1500 mm︱centre height 270 mm︱control SIEMENS 810 D ︱turning speed range 2250 U/min︱spindle nose A2 -11 ︱spindle bore 85 mm︱spindle taper 6 MK︱travel of carriage X/Z-axis 300/1550 mm︱feed X/Z-axis 5000 mm/min.︱rapid traverse 8000 mm/min.︱tailstock quill taper MT 5 ︱quill stroke 210 mm︱pinole diameter 75 mm︱total power requirement 12,5 kW︱weight of the machine ca. 3.7 t︱dimensions of the machine ca. 3,00 x 1,85 x 1,90 m︱
          acc.: 3-jaw chuck 200 mmØ, MULTIFIX-toolpost with various inserts, solid steady, running centre, coolant
            greates pass round over bed 540 mm
            turn - diameter over facing slid. 310 mm
            centre distance 1500 mm
            centre height 270 mm
            control SIEMENS 810 D
            turning speed range 2250 U/min
            spindle nose A2 -11
            spindle bore 85 mm
            spindle taper 6 MK
            travel of carriage X/Z-axis 300/1550 mm
            feed X/Z-axis 5000 mm/min.
            rapid traverse 8000 mm/min.
            tailstock quill taper MT 5
            quill stroke 210 mm
            pinole diameter 75 mm
            total power requirement 12,5 kW
            weight of the machine ca. 3.7 t
            dimensions of the machine ca. 3,00 x 1,85 x 1,90 m
            Description :
            acc.: 3-jaw chuck 200 mmØ, MULTIFIX-toolpost with various inserts, solid steady, running centre, coolant
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled WEILER E150


          • Leyendecker & Hollmann GmbH
          • Konrad-Zuse-Str. 5
          • 40789 Monheim
          • Deutschland

          • +49 (2173) 22 55 0
            +49 (2173) 25627
          • info@LHmachine.com
            www.LHmachine.com
          #1083-03137 · Lathe - cycle-controlled

          WEILER - E150 - - 2007 - cycle-controlled

          Technical details
          turning diameter 1500 mm︱turning length 3000 mm︱control cycle-controlled ︱centre height 750 mm︱centre distance 3000 mm︱greates pass round over bed 1500 mm︱Swing diameter over cross slide 1030 mm︱swing in the crank 1600 mm︱length of gap 575 mm︱max. workpiece weight 13000 kg︱working spindle: ︱number of gear stages 2 ︱turning speed range 1-900 1/min︱spindle bore 165 mm︱faceplate diameter 1400 mm︱max. torque 10000 Nm︱support construction ︱worktool system Sauter 4-times ︱longitudinal stroke 3150 mm︱face stroke 790 mm︱
          Special equipment: - without tailstock and face plate - with special chucks - with drill tailstock - with 2 nos. chip conveyor - documentation
            turning diameter 1500 mm
            turning length 3000 mm
            control cycle-controlled
            centre height 750 mm
            centre distance 3000 mm
            greates pass round over bed 1500 mm
            Swing diameter over cross slide 1030 mm
            swing in the crank 1600 mm
            length of gap 575 mm
            max. workpiece weight 13000 kg
            number of gear stages 2
            turning speed range 1-900 1/min
            spindle bore 165 mm
            faceplate diameter 1400 mm
            max. torque 10000 Nm
            worktool system Sauter 4-times
            longitudinal stroke 3150 mm
            face stroke 790 mm
            Description :
            Special equipment:
            - without tailstock and face plate
            - with special chucks
            - with drill tailstock
            - with 2 nos. chip conveyor
            - documentation
          Datasheet
          Request / Contact
          used Lathes Lathe -  cycle-controlled PBR T 35 SNC x 2000


          • Knops Werkzeugmaschinen GmbH & Co. KG
          • Konrad-Zuse-Straße 5
          • 40789 Monheim
          • Deutschland

          • 02173 - 39494-0
            02173 - 39494-29
          • maschinen@knops.de
            www.knops.de
          #1022-E05972 · Lathe - cycle-controlled

          PBR - T 35 SNC x 2000 - - 2007 - FAGOR

          Technical details
          turning diameter 720 mm︱turning length 2000 mm︱control FAGOR ︱turning diameter over slide 425 mm︱spindle bore 100 mm︱dimensions 6,0 x 2,1 x 2,1 m︱total power requirement kW︱weight of the machine ca. t︱
          •Control von Fagor •Power 28 Kw •Turning diameter over bed 720 mm •Turning diameter over saddle 425 mm •Turning length 2.000 mm •Max speed 2.000 rpm. •Power chuck Ø400 •Steady-rest Ø20-200 mm •Max. workpiece weight between centers + steady-rest 4.000 KG •Max. workpiece weight between centers 3.000 KG •Max. workpiece weight in chuck 1.200 KG
            turning diameter 720 mm
            turning length 2000 mm
            control FAGOR
            turning diameter over slide 425 mm
            spindle bore 100 mm
            dimensions 6,0 x 2,1 x 2,1 m
            Description :
            •Control von Fagor
            •Power 28 Kw
            •Turning diameter over bed 720 mm
            •Turning diameter over saddle 425 mm
            •Turning length 2.000 mm
            •Max speed 2.000 rpm.
            •Power chuck Ø400
            •Steady-rest Ø20-200 mm
            •Max. workpiece weight between centers + steady-rest 4.000 KG
            •Max. workpiece weight between centers 3.000 KG
            •Max. workpiece weight in chuck 1.200 KG
          Datasheet
          Request / Contact
          •   
          •   
          • 1  
          • 2  
          • 3  
          • 4  
          • 5  
          •   
          •   


          Cycle controlled Lathe from LagerMaschinen
          Cycle controlled Lathe from LagerMaschinen

          In the world of business and production management the cycle controlled lathe draws from several other instruments. Lathes are used in modern and classical carpentry as well as modern electrical and metal pipe work. As with any machine it's important to seek advice from top consultants when purchasing such an item. LagerMaschinen's wide selection of the the cycle controlled lathe will certainly make your choices easier. Please visit the website today to get started on LagerMaschinen.

          LagerMaschinen provides everything you need.

          LagerMaschinen's wide array of services offers its clients many opportunities. For instance you can have your new-but-used used machine correctly installed and connected - both electrically and within the entire computer network - so you can get back to production and production management. With a cycle controlled lathe from LagerMaschinen you'll also have free access to senders and machine experts and be able to ask advice as well as ensure the quality of your machine. LagerMaschinen's wide network in the machining industry means you'll be able to find the exact machine you need around the corner or at least know when you can 'give it a spin'. The cycle controlled lathe from LagerMaschinen - log on today.

          A used machine gets you where you want to be.

          The cycle controlled lathe from LagerMaschinen will certainly increase your bottom line - whether working in the plastics industry or in metalworks a cycle controlled lathe from LagerMaschinen can raise revenue annually and within the short term. Take advantage of LagerMaschinen's various add-ons such as customized delivery and installation. LagerMaschinen.de's cycle controlled lathe - start looking today.